| Message ID | 1481268131-1264-2-git-send-email-m.szyprowski@samsung.com |
|---|---|
| State | New |
| Headers | show |
On Fri, Dec 09, 2016 at 08:22:11AM +0100, Marek Szyprowski wrote: > Move assigned clocks properties from sound node to audio subsystem clock > controller node. This way clocks topology and rates are set just after > probing audio clocks controller. Leaving those properties under > sound node doesn't guarantee to configure them before they are being used > (for example i2s hardware module can be probed in parallel and it also > require proper audio clocks configuration). > > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > --- > Changelog: > v2: > - added changes for exynos4412-itop-elite board > --- > arch/arm/boot/dts/exynos4412-itop-elite.dts | 21 ++++++++++----------- > arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 20 ++++++++++---------- > 2 files changed, 20 insertions(+), 21 deletions(-) > Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Dec 09, 2016 at 08:22:11AM +0100, Marek Szyprowski wrote: > Move assigned clocks properties from sound node to audio subsystem clock > controller node. This way clocks topology and rates are set just after > probing audio clocks controller. Leaving those properties under > sound node doesn't guarantee to configure them before they are being used > (for example i2s hardware module can be probed in parallel and it also > require proper audio clocks configuration). > > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > --- > Changelog: > v2: > - added changes for exynos4412-itop-elite board > --- > arch/arm/boot/dts/exynos4412-itop-elite.dts | 21 ++++++++++----------- > arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 20 ++++++++++---------- > 2 files changed, 20 insertions(+), 21 deletions(-) > Thanks, applied. Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts index 1ac9129..d660930 100644 --- a/arch/arm/boot/dts/exynos4412-itop-elite.dts +++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts @@ -82,17 +82,6 @@ compatible = "simple-audio-card"; simple-audio-card,name = "wm-sound"; - assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, - <&clock_audss EXYNOS_MOUT_I2S>, - <&clock_audss EXYNOS_DOUT_SRP>, - <&clock_audss EXYNOS_DOUT_AUD_BUS>; - assigned-clock-parents = <&clock CLK_FOUT_EPLL>, - <&clock_audss EXYNOS_MOUT_AUDSS>; - assigned-clock-rates = <0>, - <0>, - <112896000>, - <11289600>; - simple-audio-card,format = "i2s"; simple-audio-card,bitclock-master = <&link0_codec>; simple-audio-card,frame-master = <&link0_codec>; @@ -145,6 +134,16 @@ status = "okay"; }; +&clock_audss { + assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, + <&clock_audss EXYNOS_MOUT_I2S>, + <&clock_audss EXYNOS_DOUT_SRP>, + <&clock_audss EXYNOS_DOUT_AUD_BUS>; + assigned-clock-parents = <&clock CLK_FOUT_EPLL>, + <&clock_audss EXYNOS_MOUT_AUDSS>; + assigned-clock-rates = <0>, <0>, <112896000>, <11289600>; +}; + &ehci { status = "okay"; /* In order to reset USB ethernet */ diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 7815efd..b6b0f50 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -43,16 +43,6 @@ sound: sound { compatible = "simple-audio-card"; - assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, - <&clock_audss EXYNOS_MOUT_I2S>, - <&clock_audss EXYNOS_DOUT_SRP>, - <&clock_audss EXYNOS_DOUT_AUD_BUS>; - assigned-clock-parents = <&clock CLK_FOUT_EPLL>, - <&clock_audss EXYNOS_MOUT_AUDSS>; - assigned-clock-rates = <0>, - <0>, - <192000000>, - <19200000>; simple-audio-card,format = "i2s"; simple-audio-card,bitclock-master = <&link0_codec>; @@ -157,6 +147,16 @@ status = "okay"; }; +&clock_audss { + assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, + <&clock_audss EXYNOS_MOUT_I2S>, + <&clock_audss EXYNOS_DOUT_SRP>, + <&clock_audss EXYNOS_DOUT_AUD_BUS>; + assigned-clock-parents = <&clock CLK_FOUT_EPLL>, + <&clock_audss EXYNOS_MOUT_AUDSS>; + assigned-clock-rates = <0>, <0>, <192000000>, <19200000>; +}; + &cpu0 { cpu0-supply = <&buck2_reg>; };
Move assigned clocks properties from sound node to audio subsystem clock controller node. This way clocks topology and rates are set just after probing audio clocks controller. Leaving those properties under sound node doesn't guarantee to configure them before they are being used (for example i2s hardware module can be probed in parallel and it also require proper audio clocks configuration). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> --- Changelog: v2: - added changes for exynos4412-itop-elite board --- arch/arm/boot/dts/exynos4412-itop-elite.dts | 21 ++++++++++----------- arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 20 ++++++++++---------- 2 files changed, 20 insertions(+), 21 deletions(-) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html