| Message ID | 1484745254-29626-1-git-send-email-christophe.milard@linaro.org |
|---|---|
| State | New |
| Headers | show |
On 01/18/17 16:14, Christophe Milard wrote: > Signed-off-by: Christophe Milard <christophe.milard@linaro.org> > --- > .travis.yml | 18 ++++++++++++++++++ > 1 file changed, 18 insertions(+) > > diff --git a/.travis.yml b/.travis.yml > index 03e61b1..909f0a3 100644 > --- a/.travis.yml > +++ b/.travis.yml > @@ -6,11 +6,29 @@ > # pushing to github/master will run make check > # pushing to github/coverity_scan will also launch a static analysis > # See https://scan.coverity.com/travis_ci > +# Note: "push -f" seems to have problems, do not rely on it to trigger CI from > +# github (push new commits, without '-f'). > > env: > global: > # COVERITY_SCAN_TOKEN > # ** specific to your project ** > + # Note: > + # You should have a github account and travis linked travis account. > + # To generate the proper encrypted token you need to install ruby-dev > + # and gem_install travis as follows: > + # % sudo apt-get install ruby-dev > + # % sudo gem install travis > + # then run: > + # % travis encrypt -r <you>/<proj> encrypt COVERITY_SCAN_TOKEN=<token> > + # where <you> is your github login > + # where <proj> is your github repo, e.g. "odp" > + # where <token> is the "Project Token" found on the coverity web page: > + # https://scan.coverity.com/dashboard -> <you>/<proj> -> Project_settings > + # e.g.: > + # % travis encrypt -r christophe/odp encrypt COVERITY_SCAN_TOKEN="v-HOHTCHPkya4cx2cscrYg" > + # The output string, about 700 characters long, should replace xxxx below. > + # > - secure: "xxxx" > > language: c > I did not do all that things. I just copy-pasted token from web page. Also there is button to generate new if needed. Maxim.
On 18 January 2017 at 13:26, Maxim Uvarov <maxim.uvarov@linaro.org> wrote: > On 01/18/17 16:14, Christophe Milard wrote: >> Signed-off-by: Christophe Milard <christophe.milard@linaro.org> >> --- >> .travis.yml | 18 ++++++++++++++++++ >> 1 file changed, 18 insertions(+) >> >> diff --git a/.travis.yml b/.travis.yml >> index 03e61b1..909f0a3 100644 >> --- a/.travis.yml >> +++ b/.travis.yml >> @@ -6,11 +6,29 @@ >> # pushing to github/master will run make check >> # pushing to github/coverity_scan will also launch a static analysis >> # See https://scan.coverity.com/travis_ci >> +# Note: "push -f" seems to have problems, do not rely on it to trigger CI from >> +# github (push new commits, without '-f'). >> >> env: >> global: >> # COVERITY_SCAN_TOKEN >> # ** specific to your project ** >> + # Note: >> + # You should have a github account and travis linked travis account. >> + # To generate the proper encrypted token you need to install ruby-dev >> + # and gem_install travis as follows: >> + # % sudo apt-get install ruby-dev >> + # % sudo gem install travis >> + # then run: >> + # % travis encrypt -r <you>/<proj> encrypt COVERITY_SCAN_TOKEN=<token> >> + # where <you> is your github login >> + # where <proj> is your github repo, e.g. "odp" >> + # where <token> is the "Project Token" found on the coverity web page: >> + # https://scan.coverity.com/dashboard -> <you>/<proj> -> Project_settings >> + # e.g.: >> + # % travis encrypt -r christophe/odp encrypt COVERITY_SCAN_TOKEN="v-HOHTCHPkya4cx2cscrYg" >> + # The output string, about 700 characters long, should replace xxxx below. >> + # >> - secure: "xxxx" >> >> language: c >> > > > I did not do all that things. I just copy-pasted token from web page. > Also there is button to generate new if needed. ??? Did you find the 687 char encryptred token anywhere??? Or did you just paste the normal short unencrypted token (length = 22 or so)? And you got coverity to go? not just the build? I did copy the TOKEN as found in the web page, but travis kept failing, with: "Coverity Scan API access denied. Check $PROJECT_NAME and $COVERITY_SCAN_TOKEN." Confused. Christophe. > > Maxim.
Easier way exists. This patch should be dropped. On 18 January 2017 at 13:34, Christophe Milard <christophe.milard@linaro.org> wrote: > On 18 January 2017 at 13:26, Maxim Uvarov <maxim.uvarov@linaro.org> wrote: >> On 01/18/17 16:14, Christophe Milard wrote: >>> Signed-off-by: Christophe Milard <christophe.milard@linaro.org> >>> --- >>> .travis.yml | 18 ++++++++++++++++++ >>> 1 file changed, 18 insertions(+) >>> >>> diff --git a/.travis.yml b/.travis.yml >>> index 03e61b1..909f0a3 100644 >>> --- a/.travis.yml >>> +++ b/.travis.yml >>> @@ -6,11 +6,29 @@ >>> # pushing to github/master will run make check >>> # pushing to github/coverity_scan will also launch a static analysis >>> # See https://scan.coverity.com/travis_ci >>> +# Note: "push -f" seems to have problems, do not rely on it to trigger CI from >>> +# github (push new commits, without '-f'). >>> >>> env: >>> global: >>> # COVERITY_SCAN_TOKEN >>> # ** specific to your project ** >>> + # Note: >>> + # You should have a github account and travis linked travis account. >>> + # To generate the proper encrypted token you need to install ruby-dev >>> + # and gem_install travis as follows: >>> + # % sudo apt-get install ruby-dev >>> + # % sudo gem install travis >>> + # then run: >>> + # % travis encrypt -r <you>/<proj> encrypt COVERITY_SCAN_TOKEN=<token> >>> + # where <you> is your github login >>> + # where <proj> is your github repo, e.g. "odp" >>> + # where <token> is the "Project Token" found on the coverity web page: >>> + # https://scan.coverity.com/dashboard -> <you>/<proj> -> Project_settings >>> + # e.g.: >>> + # % travis encrypt -r christophe/odp encrypt COVERITY_SCAN_TOKEN="v-HOHTCHPkya4cx2cscrYg" >>> + # The output string, about 700 characters long, should replace xxxx below. >>> + # >>> - secure: "xxxx" >>> >>> language: c >>> >> >> >> I did not do all that things. I just copy-pasted token from web page. >> Also there is button to generate new if needed. > > ??? Did you find the 687 char encryptred token anywhere??? > Or did you just paste the normal short unencrypted token (length = 22 or so)? > And you got coverity to go? not just the build? > > I did copy the TOKEN as found in the web page, but travis kept failing, with: > > "Coverity Scan API access denied. Check $PROJECT_NAME and $COVERITY_SCAN_TOKEN." > > Confused. > > Christophe. > >> >> Maxim.
diff --git a/.travis.yml b/.travis.yml index 03e61b1..909f0a3 100644 --- a/.travis.yml +++ b/.travis.yml @@ -6,11 +6,29 @@ # pushing to github/master will run make check # pushing to github/coverity_scan will also launch a static analysis # See https://scan.coverity.com/travis_ci +# Note: "push -f" seems to have problems, do not rely on it to trigger CI from +# github (push new commits, without '-f'). env: global: # COVERITY_SCAN_TOKEN # ** specific to your project ** + # Note: + # You should have a github account and travis linked travis account. + # To generate the proper encrypted token you need to install ruby-dev + # and gem_install travis as follows: + # % sudo apt-get install ruby-dev + # % sudo gem install travis + # then run: + # % travis encrypt -r <you>/<proj> encrypt COVERITY_SCAN_TOKEN=<token> + # where <you> is your github login + # where <proj> is your github repo, e.g. "odp" + # where <token> is the "Project Token" found on the coverity web page: + # https://scan.coverity.com/dashboard -> <you>/<proj> -> Project_settings + # e.g.: + # % travis encrypt -r christophe/odp encrypt COVERITY_SCAN_TOKEN="v-HOHTCHPkya4cx2cscrYg" + # The output string, about 700 characters long, should replace xxxx below. + # - secure: "xxxx" language: c
Signed-off-by: Christophe Milard <christophe.milard@linaro.org> --- .travis.yml | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) -- 2.7.4