diff mbox series

[v3,5/5] usb: musb: da8xx: Add a primary support of PM runtime

Message ID 20170119140835.18981-6-abailon@baylibre.com
State Superseded
Headers show
Series usb: musb: da8xx: Add DMA support | expand

Commit Message

Alexandre Bailon Jan. 19, 2017, 2:08 p.m. UTC 
Currently, DA8xx doesn't support PM runtime.
In addition, the glue driver is managing the clock itself.
But the CPPI DMA needs to manage this clock too.
Add support to PM runtime and use the callback to enable / disable
the clock. And because the CPPI 4.1 is a child of Da8xx USB,
it will be able to enable / disable the clock by using PM runtime.

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>

---
 drivers/usb/musb/da8xx.c | 23 ++++++-----------------
 1 file changed, 6 insertions(+), 17 deletions(-)

-- 
2.10.2

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Sergei Shtylyov Jan. 19, 2017, 4:42 p.m. UTC | #1 
On 01/19/2017 05:08 PM, Alexandre Bailon wrote:

> Currently, DA8xx doesn't support PM runtime.

> In addition, the glue driver is managing the clock itself.

> But the CPPI DMA needs to manage this clock too.

> Add support to PM runtime and use the callback to enable / disable

> the clock.


    I think this sentence is stale now....

> And because the CPPI 4.1 is a child of Da8xx USB,

> it will be able to enable / disable the clock by using PM runtime.

>

> Signed-off-by: Alexandre Bailon <abailon@baylibre.com>

> ---

>  drivers/usb/musb/da8xx.c | 23 ++++++-----------------

>  1 file changed, 6 insertions(+), 17 deletions(-)

>

> diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c

> index 8c9850c..c4478c7 100644

> --- a/drivers/usb/musb/da8xx.c

> +++ b/drivers/usb/musb/da8xx.c

[...]
> @@ -377,11 +375,7 @@ static int da8xx_musb_init(struct musb *musb)

>

>  	musb->mregs += DA8XX_MENTOR_CORE_OFFSET;

>

> -	ret = clk_prepare_enable(glue->clk);

> -	if (ret) {

> -		dev_err(glue->dev, "failed to enable clock\n");

> -		return ret;

> -	}

> +	pm_runtime_get_sync(musb->controller->parent);

>

>  	/* Returns zero if e.g. not clocked */

>  	rev = musb_readl(reg_base, DA8XX_USB_REVISION_REG);

> @@ -424,7 +418,7 @@ static int da8xx_musb_init(struct musb *musb)

>  err_phy_power_on:

>  	phy_exit(glue->phy);

>  fail:

> -	clk_disable_unprepare(glue->clk);

> +	pm_runtime_put_sync(musb->controller->parent);


    Not sure we need put_sync() here and below -- usually a simple put() is 
used...

[...]

MBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox series

Patch

diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index 8c9850c..c4478c7 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -30,7 +30,6 @@ 
  */
 
 #include <linux/module.h>
-#include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/of_platform.h>
@@ -86,7 +85,6 @@  struct da8xx_glue {
 	struct device		*dev;
 	struct platform_device	*musb;
 	struct platform_device	*usb_phy;
-	struct clk		*clk;
 	struct phy		*phy;
 };
 
@@ -377,11 +375,7 @@  static int da8xx_musb_init(struct musb *musb)
 
 	musb->mregs += DA8XX_MENTOR_CORE_OFFSET;
 
-	ret = clk_prepare_enable(glue->clk);
-	if (ret) {
-		dev_err(glue->dev, "failed to enable clock\n");
-		return ret;
-	}
+	pm_runtime_get_sync(musb->controller->parent);
 
 	/* Returns zero if e.g. not clocked */
 	rev = musb_readl(reg_base, DA8XX_USB_REVISION_REG);
@@ -424,7 +418,7 @@  static int da8xx_musb_init(struct musb *musb)
 err_phy_power_on:
 	phy_exit(glue->phy);
 fail:
-	clk_disable_unprepare(glue->clk);
+	pm_runtime_put_sync(musb->controller->parent);
 	return ret;
 }
 
@@ -436,7 +430,7 @@  static int da8xx_musb_exit(struct musb *musb)
 
 	phy_power_off(glue->phy);
 	phy_exit(glue->phy);
-	clk_disable_unprepare(glue->clk);
+	pm_runtime_put_sync(musb->controller->parent);
 
 	usb_put_phy(musb->xceiv);
 
@@ -519,7 +513,6 @@  static int da8xx_probe(struct platform_device *pdev)
 	struct musb_hdrc_platform_data	*pdata = dev_get_platdata(&pdev->dev);
 	struct da8xx_glue		*glue;
 	struct platform_device_info	pinfo;
-	struct clk			*clk;
 	struct device_node		*np = pdev->dev.of_node;
 	int				ret;
 
@@ -527,12 +520,6 @@  static int da8xx_probe(struct platform_device *pdev)
 	if (!glue)
 		return -ENOMEM;
 
-	clk = devm_clk_get(&pdev->dev, "usb20");
-	if (IS_ERR(clk)) {
-		dev_err(&pdev->dev, "failed to get clock\n");
-		return PTR_ERR(clk);
-	}
-
 	glue->phy = devm_phy_get(&pdev->dev, "usb-phy");
 	if (IS_ERR(glue->phy)) {
 		if (PTR_ERR(glue->phy) != -EPROBE_DEFER)
@@ -541,7 +528,6 @@  static int da8xx_probe(struct platform_device *pdev)
 	}
 
 	glue->dev			= &pdev->dev;
-	glue->clk			= clk;
 
 	if (IS_ENABLED(CONFIG_OF) && np) {
 		pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
@@ -587,6 +573,8 @@  static int da8xx_probe(struct platform_device *pdev)
 	pinfo.data = pdata;
 	pinfo.size_data = sizeof(*pdata);
 
+	pm_runtime_enable(&pdev->dev);
+
 	glue->musb = platform_device_register_full(&pinfo);
 	ret = PTR_ERR_OR_ZERO(glue->musb);
 	if (ret) {
@@ -603,6 +591,7 @@  static int da8xx_remove(struct platform_device *pdev)
 
 	platform_device_unregister(glue->musb);
 	usb_phy_generic_unregister(glue->usb_phy);
+	pm_runtime_disable(&pdev->dev);
 
 	return 0;
 }