| Message ID | 1491286366-30720-1-git-send-email-amit.pundir@linaro.org |
|---|---|
| Headers | show |
| Series | Stable commits picked up from lede project | expand |
On 4 April 2017 at 11:42, Amit Pundir <amit.pundir@linaro.org> wrote: > Hi Greg, > > For your consideration, stable commits taken from lede source > tree for 4.9.y. Cherry-picked and build tested on Linux 4.9.20 > for ARCH=arm/arm64/i386/x86_64 + allmodconfig. Forgot to update the Subject line of the individual patches in this series. So they don't explicitly mention that they are targeted for 4.9. Sorry for the confusion. They don't need a resend, do they? Regards, Amit Pundir > > Arnd Bergmann (1): > rt2500usb: don't mark register accesses as inline > > Bjorn Helgaas (1): > PCI: iproc: Save host bridge window resource in struct iproc_pcie > > Boris Brezillon (3): > clk: bcm: Support rate change propagation on bcm2835 clocks > clk: bcm: Allow rate change propagation to PLLH_AUX on VEC clock > clk: bcm: Fix 'maybe-uninitialized' warning in > bcm2835_clock_choose_div_and_prate() > > Eric Anholt (3): > clk: bcm2835: Don't rate change PLLs on behalf of DSI PLL dividers. > clk: bcm2835: Register the DSI0/DSI1 pixel clocks. > clk: bcm2835: Add leaf clock measurement support, disabled by default > > Felix Fietkau (1): > MIPS: Lantiq: Fix cascaded IRQ setup > > John Youn (1): > usb: dwc2: Remove unnecessary kfree > > Jon Mason (1): > ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags > > Matthias Reichl (1): > dmaengine: bcm2835: Fix cyclic DMA period splitting > > Noralf Trønnes (4): > i2c: bcm2835: Fix hang for writing messages larger than 16 bytes > i2c: bcm2835: Protect against unexpected TXW/RXR interrupts > i2c: bcm2835: Use dev_dbg logging on transfer errors > i2c: bcm2835: Can't support I2C_M_IGNORE_NAK > > Rafał Miłecki (11): > ARM: BCM5301X: Add back handler ignoring external imprecise aborts > ARM: dts: BCM5301X: Set 5 GHz wireless frequency limits on Netgear > R8000 > mtd: bcm47xxpart: fix parsing first block after aligned TRX > net: add devm version of alloc_etherdev_mqs function > net: bgmac: allocate struct bgmac just once & don't copy it > net: bgmac: drop struct bcma_mdio we don't need anymore > brcmfmac: check brcmf_bus_get_memdump result for error > brcmfmac: be more verbose when PSM's watchdog fires > brcmfmac: merge two brcmf_err macros into one > brcmfmac: switch to C function (__brcmf_err) for printing errors > brcmfmac: merge two remaining brcmf_err macros > > Stanislaw Gruszka (3): > rt2x00usb: do not anchor rx and tx urb's > rt2x00usb: fix anchor initialization > rt2x00: avoid introducing a USB dependency in the rt2x00lib module > > Tobias Klauser (1): > brcmfmac: Use net_device_stats from struct net_device > > Tobias Wolf (1): > of: Add check to of_scan_flat_dt() before accessing > initial_boot_params > > Vishal Thanki (1): > rt2x00: Fix incorrect usage of CONFIG_RT2X00_LIB_USB > > .../bindings/clock/brcm,bcm2835-cprman.txt | 15 +- > arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 48 +++ > arch/arm/boot/dts/bcm5301x.dtsi | 12 +- > arch/arm/mach-bcm/bcm_5301x.c | 28 ++ > arch/mips/lantiq/irq.c | 38 +-- > drivers/clk/bcm/clk-bcm2835.c | 375 ++++++++++++++++++--- > drivers/dma/bcm2835-dma.c | 5 +- > drivers/i2c/busses/i2c-bcm2835.c | 68 ++-- > drivers/mtd/bcm47xxpart.c | 10 +- > drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c | 98 +++--- > drivers/net/ethernet/broadcom/bgmac-bcma.c | 6 +- > drivers/net/ethernet/broadcom/bgmac-platform.c | 2 +- > drivers/net/ethernet/broadcom/bgmac.c | 25 +- > drivers/net/ethernet/broadcom/bgmac.h | 5 +- > .../wireless/broadcom/brcm80211/brcmfmac/common.c | 16 + > .../wireless/broadcom/brcm80211/brcmfmac/core.c | 26 +- > .../wireless/broadcom/brcm80211/brcmfmac/core.h | 2 - > .../wireless/broadcom/brcm80211/brcmfmac/debug.c | 35 +- > .../wireless/broadcom/brcm80211/brcmfmac/debug.h | 24 +- > drivers/net/wireless/ralink/rt2x00/rt2500usb.c | 19 +- > drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 23 +- > drivers/net/wireless/ralink/rt2x00/rt2x00usb.c | 22 +- > drivers/of/fdt.c | 9 +- > drivers/pci/host/pcie-iproc-bcma.c | 24 +- > drivers/pci/host/pcie-iproc-platform.c | 19 +- > drivers/pci/host/pcie-iproc.h | 1 + > drivers/usb/dwc2/hcd.c | 1 - > include/dt-bindings/clock/bcm2835.h | 2 + > include/linux/etherdevice.h | 5 + > net/ethernet/eth.c | 28 ++ > 30 files changed, 704 insertions(+), 287 deletions(-) > > -- > 2.7.4 >
Hi Greg, For your consideration, stable commits taken from lede source tree for 4.9.y. Cherry-picked and build tested on Linux 4.9.20 for ARCH=arm/arm64/i386/x86_64 + allmodconfig. Arnd Bergmann (1): rt2500usb: don't mark register accesses as inline Bjorn Helgaas (1): PCI: iproc: Save host bridge window resource in struct iproc_pcie Boris Brezillon (3): clk: bcm: Support rate change propagation on bcm2835 clocks clk: bcm: Allow rate change propagation to PLLH_AUX on VEC clock clk: bcm: Fix 'maybe-uninitialized' warning in bcm2835_clock_choose_div_and_prate() Eric Anholt (3): clk: bcm2835: Don't rate change PLLs on behalf of DSI PLL dividers. clk: bcm2835: Register the DSI0/DSI1 pixel clocks. clk: bcm2835: Add leaf clock measurement support, disabled by default Felix Fietkau (1): MIPS: Lantiq: Fix cascaded IRQ setup John Youn (1): usb: dwc2: Remove unnecessary kfree Jon Mason (1): ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags Matthias Reichl (1): dmaengine: bcm2835: Fix cyclic DMA period splitting Noralf Trønnes (4): i2c: bcm2835: Fix hang for writing messages larger than 16 bytes i2c: bcm2835: Protect against unexpected TXW/RXR interrupts i2c: bcm2835: Use dev_dbg logging on transfer errors i2c: bcm2835: Can't support I2C_M_IGNORE_NAK Rafał Miłecki (11): ARM: BCM5301X: Add back handler ignoring external imprecise aborts ARM: dts: BCM5301X: Set 5 GHz wireless frequency limits on Netgear R8000 mtd: bcm47xxpart: fix parsing first block after aligned TRX net: add devm version of alloc_etherdev_mqs function net: bgmac: allocate struct bgmac just once & don't copy it net: bgmac: drop struct bcma_mdio we don't need anymore brcmfmac: check brcmf_bus_get_memdump result for error brcmfmac: be more verbose when PSM's watchdog fires brcmfmac: merge two brcmf_err macros into one brcmfmac: switch to C function (__brcmf_err) for printing errors brcmfmac: merge two remaining brcmf_err macros Stanislaw Gruszka (3): rt2x00usb: do not anchor rx and tx urb's rt2x00usb: fix anchor initialization rt2x00: avoid introducing a USB dependency in the rt2x00lib module Tobias Klauser (1): brcmfmac: Use net_device_stats from struct net_device Tobias Wolf (1): of: Add check to of_scan_flat_dt() before accessing initial_boot_params Vishal Thanki (1): rt2x00: Fix incorrect usage of CONFIG_RT2X00_LIB_USB .../bindings/clock/brcm,bcm2835-cprman.txt | 15 +- arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 48 +++ arch/arm/boot/dts/bcm5301x.dtsi | 12 +- arch/arm/mach-bcm/bcm_5301x.c | 28 ++ arch/mips/lantiq/irq.c | 38 +-- drivers/clk/bcm/clk-bcm2835.c | 375 ++++++++++++++++++--- drivers/dma/bcm2835-dma.c | 5 +- drivers/i2c/busses/i2c-bcm2835.c | 68 ++-- drivers/mtd/bcm47xxpart.c | 10 +- drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c | 98 +++--- drivers/net/ethernet/broadcom/bgmac-bcma.c | 6 +- drivers/net/ethernet/broadcom/bgmac-platform.c | 2 +- drivers/net/ethernet/broadcom/bgmac.c | 25 +- drivers/net/ethernet/broadcom/bgmac.h | 5 +- .../wireless/broadcom/brcm80211/brcmfmac/common.c | 16 + .../wireless/broadcom/brcm80211/brcmfmac/core.c | 26 +- .../wireless/broadcom/brcm80211/brcmfmac/core.h | 2 - .../wireless/broadcom/brcm80211/brcmfmac/debug.c | 35 +- .../wireless/broadcom/brcm80211/brcmfmac/debug.h | 24 +- drivers/net/wireless/ralink/rt2x00/rt2500usb.c | 19 +- drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 23 +- drivers/net/wireless/ralink/rt2x00/rt2x00usb.c | 22 +- drivers/of/fdt.c | 9 +- drivers/pci/host/pcie-iproc-bcma.c | 24 +- drivers/pci/host/pcie-iproc-platform.c | 19 +- drivers/pci/host/pcie-iproc.h | 1 + drivers/usb/dwc2/hcd.c | 1 - include/dt-bindings/clock/bcm2835.h | 2 + include/linux/etherdevice.h | 5 + net/ethernet/eth.c | 28 ++ 30 files changed, 704 insertions(+), 287 deletions(-) -- 2.7.4