diff mbox

[11/20] ARM64 / ACPI: Get the enable method for SMP initialization

Message ID 1389961514-13562-12-git-send-email-hanjun.guo@linaro.org
State New
Headers show

Commit Message

Hanjun Guo Jan. 17, 2014, 12:25 p.m. UTC
ACPI has no flag to indicate different enable methods for SMP
initialization, but it indicates that spin-table is supported
at now because of the Parked Protocol shows that there is
parked address in GIC structure.

In order to boot the system with ACPI if DT is not available,
we set the default enable method as spin-table since PSCI is
not available in ACPI spec at now.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
---
 arch/arm64/include/asm/acpi.h    |    8 ++++++++
 arch/arm64/include/asm/cpu_ops.h |    1 +
 arch/arm64/include/asm/smp.h     |    2 +-
 arch/arm64/kernel/cpu_ops.c      |    2 +-
 arch/arm64/kernel/smp.c          |   42 ++++++++++++++++++++++++++++++++++++--
 drivers/acpi/plat/arm-core.c     |   26 +++++++++++++++++++++++
 6 files changed, 77 insertions(+), 4 deletions(-)

Comments

Catalin Marinas Jan. 23, 2014, 5:50 p.m. UTC | #1
On Fri, Jan 17, 2014 at 12:25:05PM +0000, Hanjun Guo wrote:
> --- a/arch/arm64/kernel/smp.c
> +++ b/arch/arm64/kernel/smp.c
> @@ -48,6 +48,7 @@
>  #include <asm/sections.h>
>  #include <asm/tlbflush.h>
>  #include <asm/ptrace.h>
> +#include <asm/acpi.h>
>  
>  /*
>   * as from 2.5, kernels no longer have an init_tasks structure
> @@ -280,7 +281,7 @@ static void (*smp_cross_call)(const struct cpumask *, unsigned int);
>   * cpu logical map array containing MPIDR values related to logical
>   * cpus. Assumes that cpu_logical_map(0) has already been initialized.
>   */
> -void __init smp_init_cpus(void)
> +static int __init of_smp_init_cpus(void)
>  {
>  	struct device_node *dn = NULL;
>  	unsigned int i, cpu = 1;
> @@ -364,6 +365,10 @@ next:
>  		cpu++;
>  	}
>  
> +	/* No device tree or no CPU node in DT */
> +	if (cpu == 1 && !bootcpu_valid)
> +		return -ENODEV;
> +
>  	/* sanity check */
>  	if (cpu > NR_CPUS)
>  		pr_warning("no. of cores (%d) greater than configured maximum of %d - clipping\n",
> @@ -371,7 +376,7 @@ next:
>  
>  	if (!bootcpu_valid) {
>  		pr_err("DT missing boot CPU MPIDR, not enabling secondaries\n");
> -		return;
> +		return -EINVAL;
>  	}
>  
>  	/*
> @@ -381,6 +386,39 @@ next:
>  	for (i = 0; i < NR_CPUS; i++)
>  		if (cpu_logical_map(i) != INVALID_HWID)
>  			set_cpu_possible(i, true);
> +
> +	return 0;
> +}
> +
> +/*
> + * In ACPI mode, the cpu possible map was enumerated before SMP
> + * initialization when MADT table was parsed, so we can get the
> + * possible map here to initialize CPUs.
> + */
> +static void __init acpi_smp_init_cpus(void)
> +{
> +	int cpu;
> +	const char *enable_method;
> +
> +	for_each_possible_cpu(cpu) {
> +		enable_method = acpi_get_enable_method(cpu);
> +		if (!enable_method)
> +			continue;
> +
> +		cpu_ops[cpu] = cpu_get_ops(enable_method);
> +		if (!cpu_ops[cpu])
> +			continue;
> +
> +		cpu_ops[cpu]->cpu_init(NULL, cpu);
> +	}
> +}
> +
> +void __init smp_init_cpus(void)
> +{
> +	if (!of_smp_init_cpus())
> +		return;
> +
> +	acpi_smp_init_cpus();
>  }

With DT we initialise the cpu_ops[0] via cpu_read_bootcpu_ops() called
from setup_arch(). This is needed because with PSCI we use cpu_ops for
power management even if it's a UP system. Do you get a some kernel
warning about device node for the boot cpu not found?

> --- a/drivers/acpi/plat/arm-core.c
> +++ b/drivers/acpi/plat/arm-core.c
> @@ -367,6 +367,32 @@ static void __init acpi_process_madt(void)
>  }
>  
>  /*
> + * To see PCSI is enabled or not.
> + *
> + * PSCI is not available for ACPI 5.0, return FALSE for now.
> + *
> + * FIXME: should we introduce early_param("psci", func) for test purpose?
> + */
> +static bool acpi_psci_smp_available(int cpu)
> +{
> +	return FALSE;
> +}
> +
> +static const char *enable_method[] = {
> +	"psci",
> +	"spin-table",
> +	NULL
> +};
> +
> +const char *acpi_get_enable_method(int cpu)
> +{
> +	if (acpi_psci_smp_available(cpu))
> +		return enable_method[0];
> +	else
> +		return enable_method[1];
> +}

You could just use literal strings here, actually even ignoring PSCI
until available.
Hanjun Guo Jan. 24, 2014, 2:57 p.m. UTC | #2
Hi Catalin,

On 2014年01月24日 01:50, Catalin Marinas wrote:
> On Fri, Jan 17, 2014 at 12:25:05PM +0000, Hanjun Guo wrote:
>> --- a/arch/arm64/kernel/smp.c
>> +++ b/arch/arm64/kernel/smp.c
>> @@ -48,6 +48,7 @@
>>   #include <asm/sections.h>
>>   #include <asm/tlbflush.h>
>>   #include <asm/ptrace.h>
>> +#include <asm/acpi.h>
>>   
>>   /*
>>    * as from 2.5, kernels no longer have an init_tasks structure
>> @@ -280,7 +281,7 @@ static void (*smp_cross_call)(const struct cpumask *, unsigned int);
>>    * cpu logical map array containing MPIDR values related to logical
>>    * cpus. Assumes that cpu_logical_map(0) has already been initialized.
>>    */
>> -void __init smp_init_cpus(void)
>> +static int __init of_smp_init_cpus(void)
>>   {
>>   	struct device_node *dn = NULL;
>>   	unsigned int i, cpu = 1;
>> @@ -364,6 +365,10 @@ next:
>>   		cpu++;
>>   	}
>>   
>> +	/* No device tree or no CPU node in DT */
>> +	if (cpu == 1 && !bootcpu_valid)
>> +		return -ENODEV;
>> +
>>   	/* sanity check */
>>   	if (cpu > NR_CPUS)
>>   		pr_warning("no. of cores (%d) greater than configured maximum of %d - clipping\n",
>> @@ -371,7 +376,7 @@ next:
>>   
>>   	if (!bootcpu_valid) {
>>   		pr_err("DT missing boot CPU MPIDR, not enabling secondaries\n");
>> -		return;
>> +		return -EINVAL;
>>   	}
>>   
>>   	/*
>> @@ -381,6 +386,39 @@ next:
>>   	for (i = 0; i < NR_CPUS; i++)
>>   		if (cpu_logical_map(i) != INVALID_HWID)
>>   			set_cpu_possible(i, true);
>> +
>> +	return 0;
>> +}
>> +
>> +/*
>> + * In ACPI mode, the cpu possible map was enumerated before SMP
>> + * initialization when MADT table was parsed, so we can get the
>> + * possible map here to initialize CPUs.
>> + */
>> +static void __init acpi_smp_init_cpus(void)
>> +{
>> +	int cpu;
>> +	const char *enable_method;
>> +
>> +	for_each_possible_cpu(cpu) {
>> +		enable_method = acpi_get_enable_method(cpu);
>> +		if (!enable_method)
>> +			continue;
>> +
>> +		cpu_ops[cpu] = cpu_get_ops(enable_method);
>> +		if (!cpu_ops[cpu])
>> +			continue;
>> +
>> +		cpu_ops[cpu]->cpu_init(NULL, cpu);
>> +	}
>> +}
>> +
>> +void __init smp_init_cpus(void)
>> +{
>> +	if (!of_smp_init_cpus())
>> +		return;
>> +
>> +	acpi_smp_init_cpus();
>>   }
> With DT we initialise the cpu_ops[0] via cpu_read_bootcpu_ops() called
> from setup_arch(). This is needed because with PSCI we use cpu_ops for
> power management even if it's a UP system. Do you get a some kernel
> warning about device node for the boot cpu not found?

Thanks for pointing this out, actually we didn't find a dts file with
spin-table method for SMP initialization, and this patch is not fully
tested (only spin-table method is supported in ACPI now), we are
working on that and get this patch fully tested.

I will review the code carefully in your comments, and update
the code accordingly.

>
>> --- a/drivers/acpi/plat/arm-core.c
>> +++ b/drivers/acpi/plat/arm-core.c
>> @@ -367,6 +367,32 @@ static void __init acpi_process_madt(void)
>>   }
>>   
>>   /*
>> + * To see PCSI is enabled or not.
>> + *
>> + * PSCI is not available for ACPI 5.0, return FALSE for now.
>> + *
>> + * FIXME: should we introduce early_param("psci", func) for test purpose?
>> + */
>> +static bool acpi_psci_smp_available(int cpu)
>> +{
>> +	return FALSE;
>> +}
>> +
>> +static const char *enable_method[] = {
>> +	"psci",
>> +	"spin-table",
>> +	NULL
>> +};
>> +
>> +const char *acpi_get_enable_method(int cpu)
>> +{
>> +	if (acpi_psci_smp_available(cpu))
>> +		return enable_method[0];
>> +	else
>> +		return enable_method[1];
>> +}
> You could just use literal strings here, actually even ignoring PSCI
> until available.

Ok.

Thanks
Hanjun
diff mbox

Patch

diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h
index 7edd39e..097394c 100644
--- a/arch/arm64/include/asm/acpi.h
+++ b/arch/arm64/include/asm/acpi.h
@@ -87,11 +87,19 @@  extern int (*acpi_suspend_lowlevel)(void);
 extern int arm_cpu_to_apicid[NR_CPUS];
 #define cpu_physical_id(cpu) arm_cpu_to_apicid[cpu]
 
+extern const char *acpi_get_enable_method(int cpu);
+
 #else	/* !CONFIG_ACPI */
 #define acpi_disabled 1		/* ACPI sometimes enabled on ARM */
 #define acpi_noirq 1		/* ACPI sometimes enabled on ARM */
 #define acpi_pci_disabled 1	/* ACPI PCI sometimes enabled on ARM */
 #define acpi_strict 1		/* no ACPI spec workarounds on ARM */
+
+static inline const char *acpi_get_enable_method(int cpu)
+{
+	return NULL;
+}
+
 #endif
 
 #endif /*_ASM_ARM64_ACPI_H*/
diff --git a/arch/arm64/include/asm/cpu_ops.h b/arch/arm64/include/asm/cpu_ops.h
index c4cdb5e..08c8f07 100644
--- a/arch/arm64/include/asm/cpu_ops.h
+++ b/arch/arm64/include/asm/cpu_ops.h
@@ -53,6 +53,7 @@  struct cpu_operations {
 };
 
 extern const struct cpu_operations *cpu_ops[NR_CPUS];
+extern const struct cpu_operations * __init cpu_get_ops(const char *name);
 extern int __init cpu_read_ops(struct device_node *dn, int cpu);
 extern void __init cpu_read_bootcpu_ops(void);
 
diff --git a/arch/arm64/include/asm/smp.h b/arch/arm64/include/asm/smp.h
index a498f2c..a5cea56 100644
--- a/arch/arm64/include/asm/smp.h
+++ b/arch/arm64/include/asm/smp.h
@@ -39,7 +39,7 @@  extern void show_ipi_list(struct seq_file *p, int prec);
 extern void handle_IPI(int ipinr, struct pt_regs *regs);
 
 /*
- * Setup the set of possible CPUs (via set_cpu_possible)
+ * Platform specific SMP operations
  */
 extern void smp_init_cpus(void);
 
diff --git a/arch/arm64/kernel/cpu_ops.c b/arch/arm64/kernel/cpu_ops.c
index d62d12f..531f2cc 100644
--- a/arch/arm64/kernel/cpu_ops.c
+++ b/arch/arm64/kernel/cpu_ops.c
@@ -35,7 +35,7 @@  static const struct cpu_operations *supported_cpu_ops[] __initconst = {
 	NULL,
 };
 
-static const struct cpu_operations * __init cpu_get_ops(const char *name)
+const struct cpu_operations * __init cpu_get_ops(const char *name)
 {
 	const struct cpu_operations **ops = supported_cpu_ops;
 
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index a0c2ca6..7719d46 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -48,6 +48,7 @@ 
 #include <asm/sections.h>
 #include <asm/tlbflush.h>
 #include <asm/ptrace.h>
+#include <asm/acpi.h>
 
 /*
  * as from 2.5, kernels no longer have an init_tasks structure
@@ -280,7 +281,7 @@  static void (*smp_cross_call)(const struct cpumask *, unsigned int);
  * cpu logical map array containing MPIDR values related to logical
  * cpus. Assumes that cpu_logical_map(0) has already been initialized.
  */
-void __init smp_init_cpus(void)
+static int __init of_smp_init_cpus(void)
 {
 	struct device_node *dn = NULL;
 	unsigned int i, cpu = 1;
@@ -364,6 +365,10 @@  next:
 		cpu++;
 	}
 
+	/* No device tree or no CPU node in DT */
+	if (cpu == 1 && !bootcpu_valid)
+		return -ENODEV;
+
 	/* sanity check */
 	if (cpu > NR_CPUS)
 		pr_warning("no. of cores (%d) greater than configured maximum of %d - clipping\n",
@@ -371,7 +376,7 @@  next:
 
 	if (!bootcpu_valid) {
 		pr_err("DT missing boot CPU MPIDR, not enabling secondaries\n");
-		return;
+		return -EINVAL;
 	}
 
 	/*
@@ -381,6 +386,39 @@  next:
 	for (i = 0; i < NR_CPUS; i++)
 		if (cpu_logical_map(i) != INVALID_HWID)
 			set_cpu_possible(i, true);
+
+	return 0;
+}
+
+/*
+ * In ACPI mode, the cpu possible map was enumerated before SMP
+ * initialization when MADT table was parsed, so we can get the
+ * possible map here to initialize CPUs.
+ */
+static void __init acpi_smp_init_cpus(void)
+{
+	int cpu;
+	const char *enable_method;
+
+	for_each_possible_cpu(cpu) {
+		enable_method = acpi_get_enable_method(cpu);
+		if (!enable_method)
+			continue;
+
+		cpu_ops[cpu] = cpu_get_ops(enable_method);
+		if (!cpu_ops[cpu])
+			continue;
+
+		cpu_ops[cpu]->cpu_init(NULL, cpu);
+	}
+}
+
+void __init smp_init_cpus(void)
+{
+	if (!of_smp_init_cpus())
+		return;
+
+	acpi_smp_init_cpus();
 }
 
 void __init smp_prepare_cpus(unsigned int max_cpus)
diff --git a/drivers/acpi/plat/arm-core.c b/drivers/acpi/plat/arm-core.c
index 1d9b789..2704633 100644
--- a/drivers/acpi/plat/arm-core.c
+++ b/drivers/acpi/plat/arm-core.c
@@ -367,6 +367,32 @@  static void __init acpi_process_madt(void)
 }
 
 /*
+ * To see PCSI is enabled or not.
+ *
+ * PSCI is not available for ACPI 5.0, return FALSE for now.
+ *
+ * FIXME: should we introduce early_param("psci", func) for test purpose?
+ */
+static bool acpi_psci_smp_available(int cpu)
+{
+	return FALSE;
+}
+
+static const char *enable_method[] = {
+	"psci",
+	"spin-table",
+	NULL
+};
+
+const char *acpi_get_enable_method(int cpu)
+{
+	if (acpi_psci_smp_available(cpu))
+		return enable_method[0];
+	else
+		return enable_method[1];
+}
+
+/*
  * acpi_boot_table_init() and acpi_boot_init()
  *  called from setup_arch(), always.
  *	1. checksums all tables