| Message ID | 1494426918-32737-7-git-send-email-bhupinder.thakur@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | None | expand |
On Wed, May 10, 2017 at 08:05:18PM +0530, Bhupinder Thakur wrote: > 1. Update documentation for a new vuart option added. > 2. Update documentation about SPI irq reserved for vpl011. > > Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org> Acked-by: Wei Liu <wei.liu2@citrix.com>
On Wed, 10 May 2017, Bhupinder Thakur wrote: > 1. Update documentation for a new vuart option added. > 2. Update documentation about SPI irq reserved for vpl011. > > Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org> > --- > > Changes since v2: > > - Incorporated the review comments on the documentation. > > docs/man/xl.cfg.pod.5.in | 9 +++++++++ > docs/misc/console.txt | 31 ++++++++++++++++++++++++++----- > 2 files changed, 35 insertions(+), 5 deletions(-) > > diff --git a/docs/man/xl.cfg.pod.5.in b/docs/man/xl.cfg.pod.5.in > index 13167ff..3397cda 100644 > --- a/docs/man/xl.cfg.pod.5.in > +++ b/docs/man/xl.cfg.pod.5.in > @@ -1085,6 +1085,15 @@ Allow a guest to access specific physical IRQs. > It is recommended to use this option only for trusted VMs under > administrator control. > > +If the virtual uart is enabled then irq 32 is reserved for it. By > +default, it is disabled. If the user specifies the following option in > +the VM config file then the vuart gets enabled. Today, only the > +"pl011" model is supported. > + > +vuart = "pl011" > + > +Currently vuart console is available only for ARM64. > + > =item B<max_event_channels=N> > > Limit the guest to using at most N event channels (PV interrupts). > diff --git a/docs/misc/console.txt b/docs/misc/console.txt > index 16da805..9eccfa1 100644 > --- a/docs/misc/console.txt > +++ b/docs/misc/console.txt > @@ -19,7 +19,20 @@ The first PV console path in xenstore remains: > > /local/domain/$DOMID/console > > -the other PV consoles follow the conventional xenstore device path and > +The virtual UART console path in xenstore is defined as: > + > +/local/domain/$DOMID/vuart/0 > + > +The vuart console provides access to a virtual pl011 UART on ARM64 systems. To > +enable vuart the following line has to be added to the guest configuration > +file: > + > +vuart = "pl011" > + > +In Linux you can select the virtual pl011 UART by using the "ttyAMA0" > +console instead of "hvc0". > + > +The other PV consoles follow the conventional xenstore device path and > live in: > > /local/domain/$DOMID/device/console/$DEVID. > @@ -61,6 +74,14 @@ output = pty > The backend will write the pty device name to the "tty" node in the > console frontend. > > +For the PV console the tty node is added at > + > +/local/domain/$DOMID/console/tty > + > +For the virtual UART console the tty node is added at > + > +/local/domain/$DOMID/vuart/0/tty > + > If the toolstack wants a listening Unix domain socket to be created at path > <path>, a connection accepted and data proxied to the console, it will write: > > @@ -79,8 +100,8 @@ For example: > ioemu > > The supported values are only xenconsoled or ioemu; xenconsoled has > -several limitations: it can only be used for the first PV console and it > -can only connect to a pty. > +several limitations: it can only be used for the first PV or virtual UART console > +and it can only connect to a pty. > > Emulated serials are provided by qemu-dm only to hvm guests; the number > of emulated serials depends on how many "-serial" command line options > @@ -90,8 +111,8 @@ xenstore in the following path: > > /local/domain/$DOMID/serial/$SERIAL_NUM/tty > > -xenconsole is the tool to connect to a PV console or an emulated serial > -that has a pty as output. Xenconsole takes a domid as parameter plus an > +xenconsole is the tool to connect to a PV or virtual UART console or an > +emulated serial that has a pty as output. Xenconsole takes a domid as parameter plus an This line is too long. Aside from that: Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> > optional console type (pv for PV consoles or serial for emulated > serials) and console number. Depending on the type and console > number, xenconsole will look for the tty node in different xenstore > -- > 2.7.4 > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xen.org > https://lists.xen.org/xen-devel >
diff --git a/docs/man/xl.cfg.pod.5.in b/docs/man/xl.cfg.pod.5.in index 13167ff..3397cda 100644 --- a/docs/man/xl.cfg.pod.5.in +++ b/docs/man/xl.cfg.pod.5.in @@ -1085,6 +1085,15 @@ Allow a guest to access specific physical IRQs. It is recommended to use this option only for trusted VMs under administrator control. +If the virtual uart is enabled then irq 32 is reserved for it. By +default, it is disabled. If the user specifies the following option in +the VM config file then the vuart gets enabled. Today, only the +"pl011" model is supported. + +vuart = "pl011" + +Currently vuart console is available only for ARM64. + =item B<max_event_channels=N> Limit the guest to using at most N event channels (PV interrupts). diff --git a/docs/misc/console.txt b/docs/misc/console.txt index 16da805..9eccfa1 100644 --- a/docs/misc/console.txt +++ b/docs/misc/console.txt @@ -19,7 +19,20 @@ The first PV console path in xenstore remains: /local/domain/$DOMID/console -the other PV consoles follow the conventional xenstore device path and +The virtual UART console path in xenstore is defined as: + +/local/domain/$DOMID/vuart/0 + +The vuart console provides access to a virtual pl011 UART on ARM64 systems. To +enable vuart the following line has to be added to the guest configuration +file: + +vuart = "pl011" + +In Linux you can select the virtual pl011 UART by using the "ttyAMA0" +console instead of "hvc0". + +The other PV consoles follow the conventional xenstore device path and live in: /local/domain/$DOMID/device/console/$DEVID. @@ -61,6 +74,14 @@ output = pty The backend will write the pty device name to the "tty" node in the console frontend. +For the PV console the tty node is added at + +/local/domain/$DOMID/console/tty + +For the virtual UART console the tty node is added at + +/local/domain/$DOMID/vuart/0/tty + If the toolstack wants a listening Unix domain socket to be created at path <path>, a connection accepted and data proxied to the console, it will write: @@ -79,8 +100,8 @@ For example: ioemu The supported values are only xenconsoled or ioemu; xenconsoled has -several limitations: it can only be used for the first PV console and it -can only connect to a pty. +several limitations: it can only be used for the first PV or virtual UART console +and it can only connect to a pty. Emulated serials are provided by qemu-dm only to hvm guests; the number of emulated serials depends on how many "-serial" command line options @@ -90,8 +111,8 @@ xenstore in the following path: /local/domain/$DOMID/serial/$SERIAL_NUM/tty -xenconsole is the tool to connect to a PV console or an emulated serial -that has a pty as output. Xenconsole takes a domid as parameter plus an +xenconsole is the tool to connect to a PV or virtual UART console or an +emulated serial that has a pty as output. Xenconsole takes a domid as parameter plus an optional console type (pv for PV consoles or serial for emulated serials) and console number. Depending on the type and console number, xenconsole will look for the tty node in different xenstore
1. Update documentation for a new vuart option added. 2. Update documentation about SPI irq reserved for vpl011. Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org> --- Changes since v2: - Incorporated the review comments on the documentation. docs/man/xl.cfg.pod.5.in | 9 +++++++++ docs/misc/console.txt | 31 ++++++++++++++++++++++++++----- 2 files changed, 35 insertions(+), 5 deletions(-)