| Message ID | 1496072763-31209-2-git-send-email-benjamin.gaignard@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | [01/15] iio: adc: stm32: use devm_of_platform_populate() | expand |
On Mon, 29 May 2017 17:45:49 +0200 Benjamin Gaignard <benjamin.gaignard@linaro.org> wrote: > Use devm_of_platform_populate() instead of of_platform_populate and > of_platform_depopulate to simplify driver code > > Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> My gut feeling is to dislike this particular instance. It's changing the order of removal of elements to not be a reverse of the order of them being set up. That takes it from obviously correct to something where some thought is required. For the trivial saving in lines of code I'm unconvinced it is a worthwhile change.. Mind you, this particular driver isn't balancing the probe and remove order anyway (the regulator stuff) so I guess it's not making it much worse... Jonathan > > CC: Jonathan Cameron <jic23@kernel.org> > CC: Hartmut Knaack <knaack.h@gmx.de> > CC: Lars-Peter Clausen <lars@metafoo.de> > CC: Alexandre Torgue <alexandre.torgue@st.com> > CC: Fabrice Gasnier <fabrice.gasnier@st.com> > CC: linux-iio@vger.kernel.org > CC: linux-arm-kernel@lists.infradead.org > CC: linux-kernel@vger.kernel.org > --- > drivers/iio/adc/stm32-adc-core.c | 4 +--- > 1 file changed, 1 insertion(+), 3 deletions(-) > > diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c > index 22b7c93..46e41dc5 100644 > --- a/drivers/iio/adc/stm32-adc-core.c > +++ b/drivers/iio/adc/stm32-adc-core.c > @@ -186,7 +186,6 @@ static void stm32_adc_irq_remove(struct platform_device *pdev, > static int stm32_adc_probe(struct platform_device *pdev) > { > struct stm32_adc_priv *priv; > - struct device_node *np = pdev->dev.of_node; > struct resource *res; > int ret; > > @@ -249,7 +248,7 @@ static int stm32_adc_probe(struct platform_device *pdev) > > platform_set_drvdata(pdev, &priv->common); > > - ret = of_platform_populate(np, NULL, NULL, &pdev->dev); > + ret = devm_of_platform_populate(&pdev->dev); > if (ret < 0) { > dev_err(&pdev->dev, "failed to populate DT children\n"); > goto err_irq_remove; > @@ -274,7 +273,6 @@ static int stm32_adc_remove(struct platform_device *pdev) > struct stm32_adc_common *common = platform_get_drvdata(pdev); > struct stm32_adc_priv *priv = to_stm32_adc_priv(common); > > - of_platform_depopulate(&pdev->dev); > stm32_adc_irq_remove(pdev, priv); > clk_disable_unprepare(priv->aclk); > regulator_disable(priv->vref);
On 05/29/2017 05:45 PM, Benjamin Gaignard wrote: > Use devm_of_platform_populate() instead of of_platform_populate and > of_platform_depopulate to simplify driver code > > Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> > > CC: Jonathan Cameron <jic23@kernel.org> > CC: Hartmut Knaack <knaack.h@gmx.de> > CC: Lars-Peter Clausen <lars@metafoo.de> > CC: Alexandre Torgue <alexandre.torgue@st.com> > CC: Fabrice Gasnier <fabrice.gasnier@st.com> > CC: linux-iio@vger.kernel.org > CC: linux-arm-kernel@lists.infradead.org > CC: linux-kernel@vger.kernel.org > --- > drivers/iio/adc/stm32-adc-core.c | 4 +--- > 1 file changed, 1 insertion(+), 3 deletions(-) > > diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c > index 22b7c93..46e41dc5 100644 > --- a/drivers/iio/adc/stm32-adc-core.c > +++ b/drivers/iio/adc/stm32-adc-core.c > @@ -186,7 +186,6 @@ static void stm32_adc_irq_remove(struct platform_device *pdev, > static int stm32_adc_probe(struct platform_device *pdev) > { > struct stm32_adc_priv *priv; > - struct device_node *np = pdev->dev.of_node; > struct resource *res; > int ret; > > @@ -249,7 +248,7 @@ static int stm32_adc_probe(struct platform_device *pdev) > > platform_set_drvdata(pdev, &priv->common); > > - ret = of_platform_populate(np, NULL, NULL, &pdev->dev); > + ret = devm_of_platform_populate(&pdev->dev); > if (ret < 0) { > dev_err(&pdev->dev, "failed to populate DT children\n"); > goto err_irq_remove; > @@ -274,7 +273,6 @@ static int stm32_adc_remove(struct platform_device *pdev) > struct stm32_adc_common *common = platform_get_drvdata(pdev); > struct stm32_adc_priv *priv = to_stm32_adc_priv(common); > > - of_platform_depopulate(&pdev->dev); Hi Benjamin, This is going to change order of sub devices removal. It may end-up with bellow resources being removed while sub-device still needs them. Not sure this is a good candidate for such a change. Best Regards, Fabrice > stm32_adc_irq_remove(pdev, priv); > clk_disable_unprepare(priv->aclk); > regulator_disable(priv->vref); >
diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c index 22b7c93..46e41dc5 100644 --- a/drivers/iio/adc/stm32-adc-core.c +++ b/drivers/iio/adc/stm32-adc-core.c @@ -186,7 +186,6 @@ static void stm32_adc_irq_remove(struct platform_device *pdev, static int stm32_adc_probe(struct platform_device *pdev) { struct stm32_adc_priv *priv; - struct device_node *np = pdev->dev.of_node; struct resource *res; int ret; @@ -249,7 +248,7 @@ static int stm32_adc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, &priv->common); - ret = of_platform_populate(np, NULL, NULL, &pdev->dev); + ret = devm_of_platform_populate(&pdev->dev); if (ret < 0) { dev_err(&pdev->dev, "failed to populate DT children\n"); goto err_irq_remove; @@ -274,7 +273,6 @@ static int stm32_adc_remove(struct platform_device *pdev) struct stm32_adc_common *common = platform_get_drvdata(pdev); struct stm32_adc_priv *priv = to_stm32_adc_priv(common); - of_platform_depopulate(&pdev->dev); stm32_adc_irq_remove(pdev, priv); clk_disable_unprepare(priv->aclk); regulator_disable(priv->vref);
Use devm_of_platform_populate() instead of of_platform_populate and of_platform_depopulate to simplify driver code Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> CC: Jonathan Cameron <jic23@kernel.org> CC: Hartmut Knaack <knaack.h@gmx.de> CC: Lars-Peter Clausen <lars@metafoo.de> CC: Alexandre Torgue <alexandre.torgue@st.com> CC: Fabrice Gasnier <fabrice.gasnier@st.com> CC: linux-iio@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-kernel@vger.kernel.org --- drivers/iio/adc/stm32-adc-core.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) -- 1.9.1