| Message ID | 1501839294-478-4-git-send-email-m.szyprowski@samsung.com |
|---|---|
| State | New |
| Headers | show |
| Series | [v7,1/4] clk: Add support for runtime PM | expand |
Hi, As I replied on patch2, I tested these patches on Exynos5433-based TM2. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Regards, Chanwoo Choi On Fri, Aug 4, 2017 at 6:34 PM, Marek Szyprowski <m.szyprowski@samsung.com> wrote: > Add runtime pm support for all clock controller units (CMU), which belongs > to power domains and require special handling during on/off operations. > Typically special values has to be written to MUX registers to change > internal clocks parents to OSC clock before turning power off. During such > operation all clocks, which enters CMU has to be enabled to let MUX to > stabilize. Also for each CMU there is one special parent clock, which has > to be enabled all the time when any access to CMU registers is done. > > This patch solves most of the mysterious external abort and freeze issues > caused by a lack of proper parent CMU clock enabled or incorrect turn off > procedure. > > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> > --- > .../devicetree/bindings/clock/exynos5433-clock.txt | 16 + > drivers/clk/samsung/clk-exynos5433.c | 409 ++++++++++++++++----- > drivers/clk/samsung/clk.h | 6 + > 3 files changed, 346 insertions(+), 85 deletions(-) > > diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt > index 1dc80f8811fe..5c7dd12e667a 100644 > --- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt > +++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt > @@ -168,6 +168,11 @@ Required Properties: > - aclk_cam1_400 > - aclk_cam1_552 > > +Optional properties: > + - power-domains: a phandle to respective power domain node as described by > + generic PM domain bindings (see power/power_domain.txt for more > + information). > + > Each clock is assigned an identifier and client nodes can use this identifier > to specify the clock which they consume. > > @@ -270,6 +275,7 @@ Example 2: Examples of clock controller nodes are listed below. > clocks = <&xxti>, > <&cmu_top CLK_ACLK_G2D_266>, > <&cmu_top CLK_ACLK_G2D_400>; > + power-domains = <&pd_g2d>; > }; > > cmu_disp: clock-controller@13b90000 { > @@ -295,6 +301,7 @@ Example 2: Examples of clock controller nodes are listed below. > <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>, > <&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>, > <&cmu_mif CLK_ACLK_DISP_333>; > + power-domains = <&pd_disp>; > }; > > cmu_aud: clock-controller@114c0000 { > @@ -304,6 +311,7 @@ Example 2: Examples of clock controller nodes are listed below. > > clock-names = "oscclk", "fout_aud_pll"; > clocks = <&xxti>, <&cmu_top CLK_FOUT_AUD_PLL>; > + power-domains = <&pd_aud>; > }; > > cmu_bus0: clock-controller@13600000 { > @@ -340,6 +348,7 @@ Example 2: Examples of clock controller nodes are listed below. > > clock-names = "oscclk", "aclk_g3d_400"; > clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>; > + power-domains = <&pd_g3d>; > }; > > cmu_gscl: clock-controller@13cf0000 { > @@ -353,6 +362,7 @@ Example 2: Examples of clock controller nodes are listed below. > clocks = <&xxti>, > <&cmu_top CLK_ACLK_GSCL_111>, > <&cmu_top CLK_ACLK_GSCL_333>; > + power-domains = <&pd_gscl>; > }; > > cmu_apollo: clock-controller@11900000 { > @@ -384,6 +394,7 @@ Example 2: Examples of clock controller nodes are listed below. > clocks = <&xxti>, > <&cmu_top CLK_SCLK_JPEG_MSCL>, > <&cmu_top CLK_ACLK_MSCL_400>; > + power-domains = <&pd_mscl>; > }; > > cmu_mfc: clock-controller@15280000 { > @@ -393,6 +404,7 @@ Example 2: Examples of clock controller nodes are listed below. > > clock-names = "oscclk", "aclk_mfc_400"; > clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>; > + power-domains = <&pd_mfc>; > }; > > cmu_hevc: clock-controller@14f80000 { > @@ -402,6 +414,7 @@ Example 2: Examples of clock controller nodes are listed below. > > clock-names = "oscclk", "aclk_hevc_400"; > clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>; > + power-domains = <&pd_hevc>; > }; > > cmu_isp: clock-controller@146d0000 { > @@ -415,6 +428,7 @@ Example 2: Examples of clock controller nodes are listed below. > clocks = <&xxti>, > <&cmu_top CLK_ACLK_ISP_DIS_400>, > <&cmu_top CLK_ACLK_ISP_400>; > + power-domains = <&pd_isp>; > }; > > cmu_cam0: clock-controller@120d0000 { > @@ -430,6 +444,7 @@ Example 2: Examples of clock controller nodes are listed below. > <&cmu_top CLK_ACLK_CAM0_333>, > <&cmu_top CLK_ACLK_CAM0_400>, > <&cmu_top CLK_ACLK_CAM0_552>; > + power-domains = <&pd_cam0>; > }; > > cmu_cam1: clock-controller@145d0000 { > @@ -451,6 +466,7 @@ Example 2: Examples of clock controller nodes are listed below. > <&cmu_top CLK_ACLK_CAM1_333>, > <&cmu_top CLK_ACLK_CAM1_400>, > <&cmu_top CLK_ACLK_CAM1_552>; > + power-domains = <&pd_cam1>; > }; > > Example 3: UART controller node that consumes the clock generated by the clock > diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c > index 11343a597093..7ae9bccb1192 100644 > --- a/drivers/clk/samsung/clk-exynos5433.c > +++ b/drivers/clk/samsung/clk-exynos5433.c > @@ -9,9 +9,14 @@ > * Common Clock Framework support for Exynos5433 SoC. > */ > > +#include <linux/clk.h> > #include <linux/clk-provider.h> > #include <linux/of.h> > #include <linux/of_address.h> > +#include <linux/of_device.h> > +#include <linux/platform_device.h> > +#include <linux/pm_runtime.h> > +#include <linux/slab.h> > > #include <dt-bindings/clock/exynos5433.h> > > @@ -1991,6 +1996,14 @@ static void __init exynos5433_cmu_peris_init(struct device_node *np) > ENABLE_IP_FSYS1, > }; > > +static const struct samsung_clk_reg_dump fsys_suspend_regs[] = { > + { MUX_SEL_FSYS0, 0 }, > + { MUX_SEL_FSYS1, 0 }, > + { MUX_SEL_FSYS2, 0 }, > + { MUX_SEL_FSYS3, 0 }, > + { MUX_SEL_FSYS4, 0 }, > +}; > + > static const struct samsung_fixed_rate_clock fsys_fixed_clks[] __initconst = { > /* PHY clocks from USBDRD30_PHY */ > FRATE(CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY, > @@ -2296,16 +2309,11 @@ static void __init exynos5433_cmu_peris_init(struct device_node *np) > .nr_clk_ids = FSYS_NR_CLK, > .clk_regs = fsys_clk_regs, > .nr_clk_regs = ARRAY_SIZE(fsys_clk_regs), > + .suspend_regs = fsys_suspend_regs, > + .nr_suspend_regs = ARRAY_SIZE(fsys_suspend_regs), > + .clk_name = "aclk_fsys_200", > }; > > -static void __init exynos5433_cmu_fsys_init(struct device_node *np) > -{ > - samsung_cmu_register_one(np, &fsys_cmu_info); > -} > - > -CLK_OF_DECLARE(exynos5433_cmu_fsys, "samsung,exynos5433-cmu-fsys", > - exynos5433_cmu_fsys_init); > - > /* > * Register offset definitions for CMU_G2D > */ > @@ -2335,6 +2343,10 @@ static void __init exynos5433_cmu_fsys_init(struct device_node *np) > DIV_ENABLE_IP_G2D_SECURE_SMMU_G2D, > }; > > +static const struct samsung_clk_reg_dump g2d_suspend_regs[] = { > + { MUX_SEL_G2D0, 0 }, > +}; > + > /* list of all parent clock list */ > PNAME(mout_aclk_g2d_266_user_p) = { "oscclk", "aclk_g2d_266", }; > PNAME(mout_aclk_g2d_400_user_p) = { "oscclk", "aclk_g2d_400", }; > @@ -2420,16 +2432,11 @@ static void __init exynos5433_cmu_fsys_init(struct device_node *np) > .nr_clk_ids = G2D_NR_CLK, > .clk_regs = g2d_clk_regs, > .nr_clk_regs = ARRAY_SIZE(g2d_clk_regs), > + .suspend_regs = g2d_suspend_regs, > + .nr_suspend_regs = ARRAY_SIZE(g2d_suspend_regs), > + .clk_name = "aclk_g2d_400", > }; > > -static void __init exynos5433_cmu_g2d_init(struct device_node *np) > -{ > - samsung_cmu_register_one(np, &g2d_cmu_info); > -} > - > -CLK_OF_DECLARE(exynos5433_cmu_g2d, "samsung,exynos5433-cmu-g2d", > - exynos5433_cmu_g2d_init); > - > /* > * Register offset definitions for CMU_DISP > */ > @@ -2494,6 +2501,18 @@ static void __init exynos5433_cmu_g2d_init(struct device_node *np) > CLKOUT_CMU_DISP_DIV_STAT, > }; > > +static const struct samsung_clk_reg_dump disp_suspend_regs[] = { > + /* PLL has to be enabled for suspend */ > + { DISP_PLL_CON0, 0x85f40502 }, > + /* ignore status of external PHY muxes during suspend to avoid hangs */ > + { MUX_IGNORE_DISP2, 0x00111111 }, > + { MUX_SEL_DISP0, 0 }, > + { MUX_SEL_DISP1, 0 }, > + { MUX_SEL_DISP2, 0 }, > + { MUX_SEL_DISP3, 0 }, > + { MUX_SEL_DISP4, 0 }, > +}; > + > /* list of all parent clock list */ > PNAME(mout_disp_pll_p) = { "oscclk", "fout_disp_pll", }; > PNAME(mout_sclk_dsim1_user_p) = { "oscclk", "sclk_dsim1_disp", }; > @@ -2841,16 +2860,11 @@ static void __init exynos5433_cmu_g2d_init(struct device_node *np) > .nr_clk_ids = DISP_NR_CLK, > .clk_regs = disp_clk_regs, > .nr_clk_regs = ARRAY_SIZE(disp_clk_regs), > + .suspend_regs = disp_suspend_regs, > + .nr_suspend_regs = ARRAY_SIZE(disp_suspend_regs), > + .clk_name = "aclk_disp_333", > }; > > -static void __init exynos5433_cmu_disp_init(struct device_node *np) > -{ > - samsung_cmu_register_one(np, &disp_cmu_info); > -} > - > -CLK_OF_DECLARE(exynos5433_cmu_disp, "samsung,exynos5433-cmu-disp", > - exynos5433_cmu_disp_init); > - > /* > * Register offset definitions for CMU_AUD > */ > @@ -2885,6 +2899,11 @@ static void __init exynos5433_cmu_disp_init(struct device_node *np) > ENABLE_IP_AUD1, > }; > > +static const struct samsung_clk_reg_dump aud_suspend_regs[] = { > + { MUX_SEL_AUD0, 0 }, > + { MUX_SEL_AUD1, 0 }, > +}; > + > /* list of all parent clock list */ > PNAME(mout_aud_pll_user_aud_p) = { "oscclk", "fout_aud_pll", }; > PNAME(mout_sclk_aud_pcm_p) = { "mout_aud_pll_user", "ioclk_audiocdclk0",}; > @@ -3011,16 +3030,11 @@ static void __init exynos5433_cmu_disp_init(struct device_node *np) > .nr_clk_ids = AUD_NR_CLK, > .clk_regs = aud_clk_regs, > .nr_clk_regs = ARRAY_SIZE(aud_clk_regs), > + .suspend_regs = aud_suspend_regs, > + .nr_suspend_regs = ARRAY_SIZE(aud_suspend_regs), > + .clk_name = "fout_aud_pll", > }; > > -static void __init exynos5433_cmu_aud_init(struct device_node *np) > -{ > - samsung_cmu_register_one(np, &aud_cmu_info); > -} > -CLK_OF_DECLARE(exynos5433_cmu_aud, "samsung,exynos5433-cmu-aud", > - exynos5433_cmu_aud_init); > - > - > /* > * Register offset definitions for CMU_BUS{0|1|2} > */ > @@ -3222,6 +3236,10 @@ static void __init exynos5433_cmu_aud_init(struct device_node *np) > CLK_STOPCTRL, > }; > > +static const struct samsung_clk_reg_dump g3d_suspend_regs[] = { > + { MUX_SEL_G3D, 0 }, > +}; > + > /* list of all parent clock list */ > PNAME(mout_aclk_g3d_400_p) = { "mout_g3d_pll", "aclk_g3d_400", }; > PNAME(mout_g3d_pll_p) = { "oscclk", "fout_g3d_pll", }; > @@ -3295,15 +3313,11 @@ static void __init exynos5433_cmu_aud_init(struct device_node *np) > .nr_clk_ids = G3D_NR_CLK, > .clk_regs = g3d_clk_regs, > .nr_clk_regs = ARRAY_SIZE(g3d_clk_regs), > + .suspend_regs = g3d_suspend_regs, > + .nr_suspend_regs = ARRAY_SIZE(g3d_suspend_regs), > + .clk_name = "aclk_g3d_400", > }; > > -static void __init exynos5433_cmu_g3d_init(struct device_node *np) > -{ > - samsung_cmu_register_one(np, &g3d_cmu_info); > -} > -CLK_OF_DECLARE(exynos5433_cmu_g3d, "samsung,exynos5433-cmu-g3d", > - exynos5433_cmu_g3d_init); > - > /* > * Register offset definitions for CMU_GSCL > */ > @@ -3342,6 +3356,12 @@ static void __init exynos5433_cmu_g3d_init(struct device_node *np) > ENABLE_IP_GSCL_SECURE_SMMU_GSCL2, > }; > > +static const struct samsung_clk_reg_dump gscl_suspend_regs[] = { > + { MUX_SEL_GSCL, 0 }, > + { ENABLE_ACLK_GSCL, 0xfff }, > + { ENABLE_PCLK_GSCL, 0xff }, > +}; > + > /* list of all parent clock list */ > PNAME(aclk_gscl_111_user_p) = { "oscclk", "aclk_gscl_111", }; > PNAME(aclk_gscl_333_user_p) = { "oscclk", "aclk_gscl_333", }; > @@ -3436,15 +3456,11 @@ static void __init exynos5433_cmu_g3d_init(struct device_node *np) > .nr_clk_ids = GSCL_NR_CLK, > .clk_regs = gscl_clk_regs, > .nr_clk_regs = ARRAY_SIZE(gscl_clk_regs), > + .suspend_regs = gscl_suspend_regs, > + .nr_suspend_regs = ARRAY_SIZE(gscl_suspend_regs), > + .clk_name = "aclk_gscl_111", > }; > > -static void __init exynos5433_cmu_gscl_init(struct device_node *np) > -{ > - samsung_cmu_register_one(np, &gscl_cmu_info); > -} > -CLK_OF_DECLARE(exynos5433_cmu_gscl, "samsung,exynos5433-cmu-gscl", > - exynos5433_cmu_gscl_init); > - > /* > * Register offset definitions for CMU_APOLLO > */ > @@ -3970,6 +3986,11 @@ static void __init exynos5433_cmu_atlas_init(struct device_node *np) > ENABLE_IP_MSCL_SECURE_SMMU_JPEG, > }; > > +static const struct samsung_clk_reg_dump mscl_suspend_regs[] = { > + { MUX_SEL_MSCL0, 0 }, > + { MUX_SEL_MSCL1, 0 }, > +}; > + > /* list of all parent clock list */ > PNAME(mout_sclk_jpeg_user_p) = { "oscclk", "sclk_jpeg_mscl", }; > PNAME(mout_aclk_mscl_400_user_p) = { "oscclk", "aclk_mscl_400", }; > @@ -4082,15 +4103,11 @@ static void __init exynos5433_cmu_atlas_init(struct device_node *np) > .nr_clk_ids = MSCL_NR_CLK, > .clk_regs = mscl_clk_regs, > .nr_clk_regs = ARRAY_SIZE(mscl_clk_regs), > + .suspend_regs = mscl_suspend_regs, > + .nr_suspend_regs = ARRAY_SIZE(mscl_suspend_regs), > + .clk_name = "aclk_mscl_400", > }; > > -static void __init exynos5433_cmu_mscl_init(struct device_node *np) > -{ > - samsung_cmu_register_one(np, &mscl_cmu_info); > -} > -CLK_OF_DECLARE(exynos5433_cmu_mscl, "samsung,exynos5433-cmu-mscl", > - exynos5433_cmu_mscl_init); > - > /* > * Register offset definitions for CMU_MFC > */ > @@ -4120,6 +4137,10 @@ static void __init exynos5433_cmu_mscl_init(struct device_node *np) > ENABLE_IP_MFC_SECURE_SMMU_MFC, > }; > > +static const struct samsung_clk_reg_dump mfc_suspend_regs[] = { > + { MUX_SEL_MFC, 0 }, > +}; > + > PNAME(mout_aclk_mfc_400_user_p) = { "oscclk", "aclk_mfc_400", }; > > static const struct samsung_mux_clock mfc_mux_clks[] __initconst = { > @@ -4190,15 +4211,11 @@ static void __init exynos5433_cmu_mscl_init(struct device_node *np) > .nr_clk_ids = MFC_NR_CLK, > .clk_regs = mfc_clk_regs, > .nr_clk_regs = ARRAY_SIZE(mfc_clk_regs), > + .suspend_regs = mfc_suspend_regs, > + .nr_suspend_regs = ARRAY_SIZE(mfc_suspend_regs), > + .clk_name = "aclk_mfc_400", > }; > > -static void __init exynos5433_cmu_mfc_init(struct device_node *np) > -{ > - samsung_cmu_register_one(np, &mfc_cmu_info); > -} > -CLK_OF_DECLARE(exynos5433_cmu_mfc, "samsung,exynos5433-cmu-mfc", > - exynos5433_cmu_mfc_init); > - > /* > * Register offset definitions for CMU_HEVC > */ > @@ -4228,6 +4245,10 @@ static void __init exynos5433_cmu_mfc_init(struct device_node *np) > ENABLE_IP_HEVC_SECURE_SMMU_HEVC, > }; > > +static const struct samsung_clk_reg_dump hevc_suspend_regs[] = { > + { MUX_SEL_HEVC, 0 }, > +}; > + > PNAME(mout_aclk_hevc_400_user_p) = { "oscclk", "aclk_hevc_400", }; > > static const struct samsung_mux_clock hevc_mux_clks[] __initconst = { > @@ -4300,15 +4321,11 @@ static void __init exynos5433_cmu_mfc_init(struct device_node *np) > .nr_clk_ids = HEVC_NR_CLK, > .clk_regs = hevc_clk_regs, > .nr_clk_regs = ARRAY_SIZE(hevc_clk_regs), > + .suspend_regs = hevc_suspend_regs, > + .nr_suspend_regs = ARRAY_SIZE(hevc_suspend_regs), > + .clk_name = "aclk_hevc_400", > }; > > -static void __init exynos5433_cmu_hevc_init(struct device_node *np) > -{ > - samsung_cmu_register_one(np, &hevc_cmu_info); > -} > -CLK_OF_DECLARE(exynos5433_cmu_hevc, "samsung,exynos5433-cmu-hevc", > - exynos5433_cmu_hevc_init); > - > /* > * Register offset definitions for CMU_ISP > */ > @@ -4342,6 +4359,10 @@ static void __init exynos5433_cmu_hevc_init(struct device_node *np) > ENABLE_IP_ISP3, > }; > > +static const struct samsung_clk_reg_dump isp_suspend_regs[] = { > + { MUX_SEL_ISP, 0 }, > +}; > + > PNAME(mout_aclk_isp_dis_400_user_p) = { "oscclk", "aclk_isp_dis_400", }; > PNAME(mout_aclk_isp_400_user_p) = { "oscclk", "aclk_isp_400", }; > > @@ -4553,15 +4574,11 @@ static void __init exynos5433_cmu_hevc_init(struct device_node *np) > .nr_clk_ids = ISP_NR_CLK, > .clk_regs = isp_clk_regs, > .nr_clk_regs = ARRAY_SIZE(isp_clk_regs), > + .suspend_regs = isp_suspend_regs, > + .nr_suspend_regs = ARRAY_SIZE(isp_suspend_regs), > + .clk_name = "aclk_isp_400", > }; > > -static void __init exynos5433_cmu_isp_init(struct device_node *np) > -{ > - samsung_cmu_register_one(np, &isp_cmu_info); > -} > -CLK_OF_DECLARE(exynos5433_cmu_isp, "samsung,exynos5433-cmu-isp", > - exynos5433_cmu_isp_init); > - > /* > * Register offset definitions for CMU_CAM0 > */ > @@ -4625,6 +4642,15 @@ static void __init exynos5433_cmu_isp_init(struct device_node *np) > ENABLE_IP_CAM02, > ENABLE_IP_CAM03, > }; > + > +static const struct samsung_clk_reg_dump cam0_suspend_regs[] = { > + { MUX_SEL_CAM00, 0 }, > + { MUX_SEL_CAM01, 0 }, > + { MUX_SEL_CAM02, 0 }, > + { MUX_SEL_CAM03, 0 }, > + { MUX_SEL_CAM04, 0 }, > +}; > + > PNAME(mout_aclk_cam0_333_user_p) = { "oscclk", "aclk_cam0_333", }; > PNAME(mout_aclk_cam0_400_user_p) = { "oscclk", "aclk_cam0_400", }; > PNAME(mout_aclk_cam0_552_user_p) = { "oscclk", "aclk_cam0_552", }; > @@ -5030,15 +5056,11 @@ static void __init exynos5433_cmu_isp_init(struct device_node *np) > .nr_clk_ids = CAM0_NR_CLK, > .clk_regs = cam0_clk_regs, > .nr_clk_regs = ARRAY_SIZE(cam0_clk_regs), > + .suspend_regs = cam0_suspend_regs, > + .nr_suspend_regs = ARRAY_SIZE(cam0_suspend_regs), > + .clk_name = "aclk_cam0_400", > }; > > -static void __init exynos5433_cmu_cam0_init(struct device_node *np) > -{ > - samsung_cmu_register_one(np, &cam0_cmu_info); > -} > -CLK_OF_DECLARE(exynos5433_cmu_cam0, "samsung,exynos5433-cmu-cam0", > - exynos5433_cmu_cam0_init); > - > /* > * Register offset definitions for CMU_CAM1 > */ > @@ -5085,6 +5107,12 @@ static void __init exynos5433_cmu_cam0_init(struct device_node *np) > ENABLE_IP_CAM12, > }; > > +static const struct samsung_clk_reg_dump cam1_suspend_regs[] = { > + { MUX_SEL_CAM10, 0 }, > + { MUX_SEL_CAM11, 0 }, > + { MUX_SEL_CAM12, 0 }, > +}; > + > PNAME(mout_sclk_isp_uart_user_p) = { "oscclk", "sclk_isp_uart_cam1", }; > PNAME(mout_sclk_isp_spi1_user_p) = { "oscclk", "sclk_isp_spi1_cam1", }; > PNAME(mout_sclk_isp_spi0_user_p) = { "oscclk", "sclk_isp_spi0_cam1", }; > @@ -5403,11 +5431,222 @@ static void __init exynos5433_cmu_cam0_init(struct device_node *np) > .nr_clk_ids = CAM1_NR_CLK, > .clk_regs = cam1_clk_regs, > .nr_clk_regs = ARRAY_SIZE(cam1_clk_regs), > + .suspend_regs = cam1_suspend_regs, > + .nr_suspend_regs = ARRAY_SIZE(cam1_suspend_regs), > + .clk_name = "aclk_cam1_400", > +}; > + > + > +struct exynos5433_cmu_data { > + struct samsung_clk_reg_dump *clk_save; > + unsigned int nr_clk_save; > + const struct samsung_clk_reg_dump *clk_suspend; > + unsigned int nr_clk_suspend; > + > + struct clk *clk; > + struct clk **pclks; > + int nr_pclks; > + > + /* must be the last entry */ > + struct samsung_clk_provider ctx; > +}; > + > +static int exynos5433_cmu_suspend(struct device *dev) > +{ > + struct exynos5433_cmu_data *data = dev_get_drvdata(dev); > + int i; > + > + samsung_clk_save(data->ctx.reg_base, data->clk_save, > + data->nr_clk_save); > + > + for (i = 0; i < data->nr_pclks; i++) > + clk_prepare_enable(data->pclks[i]); > + > + samsung_clk_restore(data->ctx.reg_base, data->clk_suspend, > + data->nr_clk_suspend); > + > + for (i = 0; i < data->nr_pclks; i++) > + clk_disable_unprepare(data->pclks[i]); > + > + clk_disable_unprepare(data->clk); > + > + return 0; > +} > + > +static int exynos5433_cmu_resume(struct device *dev) > +{ > + struct exynos5433_cmu_data *data = dev_get_drvdata(dev); > + int i; > + > + clk_prepare_enable(data->clk); > + > + for (i = 0; i < data->nr_pclks; i++) > + clk_prepare_enable(data->pclks[i]); > + > + samsung_clk_restore(data->ctx.reg_base, data->clk_save, > + data->nr_clk_save); > + > + for (i = 0; i < data->nr_pclks; i++) > + clk_disable_unprepare(data->pclks[i]); > + > + return 0; > +} > + > +static int __init exynos5433_cmu_probe(struct platform_device *pdev) > +{ > + const struct samsung_cmu_info *info; > + struct exynos5433_cmu_data *data; > + struct samsung_clk_provider *ctx; > + struct device *dev = &pdev->dev; > + struct resource *res; > + void __iomem *reg_base; > + int i; > + > + info = of_device_get_match_data(dev); > + > + data = devm_kzalloc(dev, sizeof(*data) + > + sizeof(*data->ctx.clk_data.hws) * info->nr_clk_ids, > + GFP_KERNEL); > + if (!data) > + return -ENOMEM; > + ctx = &data->ctx; > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + reg_base = devm_ioremap_resource(dev, res); > + if (IS_ERR(reg_base)) { > + dev_err(dev, "failed to map registers\n"); > + return PTR_ERR(reg_base); > + } > + > + for (i = 0; i < info->nr_clk_ids; ++i) > + ctx->clk_data.hws[i] = ERR_PTR(-ENOENT); > + > + ctx->clk_data.num = info->nr_clk_ids; > + ctx->reg_base = reg_base; > + ctx->dev = dev; > + spin_lock_init(&ctx->lock); > + > + data->clk_save = samsung_clk_alloc_reg_dump(info->clk_regs, > + info->nr_clk_regs); > + data->nr_clk_save = info->nr_clk_regs; > + data->clk_suspend = info->suspend_regs; > + data->nr_clk_suspend = info->nr_suspend_regs; > + data->nr_pclks = of_count_phandle_with_args(dev->of_node, "clocks", > + "#clock-cells"); > + if (data->nr_pclks > 0) { > + data->pclks = devm_kcalloc(dev, sizeof(struct clk *), > + data->nr_pclks, GFP_KERNEL); > + > + for (i = 0; i < data->nr_pclks; i++) { > + struct clk *clk = of_clk_get(dev->of_node, i); > + > + if (IS_ERR(clk)) > + return PTR_ERR(clk); > + data->pclks[i] = clk; > + } > + } > + > + if (info->clk_name) > + data->clk = clk_get(dev, info->clk_name); > + clk_prepare_enable(data->clk); > + > + platform_set_drvdata(pdev, data); > + > + /* > + * Enable runtime PM here to allow the clock core using runtime PM > + * for the registered clocks. Additionally, we increase the runtime > + * PM usage count before registering the clocks, to prevent the > + * clock core from runtime suspending the device. > + */ > + pm_runtime_get_noresume(dev); > + pm_runtime_set_active(dev); > + pm_runtime_enable(dev); > + > + if (info->pll_clks) > + samsung_clk_register_pll(ctx, info->pll_clks, info->nr_pll_clks, > + reg_base); > + if (info->mux_clks) > + samsung_clk_register_mux(ctx, info->mux_clks, > + info->nr_mux_clks); > + if (info->div_clks) > + samsung_clk_register_div(ctx, info->div_clks, > + info->nr_div_clks); > + if (info->gate_clks) > + samsung_clk_register_gate(ctx, info->gate_clks, > + info->nr_gate_clks); > + if (info->fixed_clks) > + samsung_clk_register_fixed_rate(ctx, info->fixed_clks, > + info->nr_fixed_clks); > + if (info->fixed_factor_clks) > + samsung_clk_register_fixed_factor(ctx, info->fixed_factor_clks, > + info->nr_fixed_factor_clks); > + > + samsung_clk_of_add_provider(dev->of_node, ctx); > + pm_runtime_put_sync(dev); > + > + return 0; > +} > + > +static const struct of_device_id exynos5433_cmu_of_match[] = { > + { > + .compatible = "samsung,exynos5433-cmu-aud", > + .data = &aud_cmu_info, > + }, { > + .compatible = "samsung,exynos5433-cmu-cam0", > + .data = &cam0_cmu_info, > + }, { > + .compatible = "samsung,exynos5433-cmu-cam1", > + .data = &cam1_cmu_info, > + }, { > + .compatible = "samsung,exynos5433-cmu-disp", > + .data = &disp_cmu_info, > + }, { > + .compatible = "samsung,exynos5433-cmu-g2d", > + .data = &g2d_cmu_info, > + }, { > + .compatible = "samsung,exynos5433-cmu-g3d", > + .data = &g3d_cmu_info, > + }, { > + .compatible = "samsung,exynos5433-cmu-fsys", > + .data = &fsys_cmu_info, > + }, { > + .compatible = "samsung,exynos5433-cmu-gscl", > + .data = &gscl_cmu_info, > + }, { > + .compatible = "samsung,exynos5433-cmu-mfc", > + .data = &mfc_cmu_info, > + }, { > + .compatible = "samsung,exynos5433-cmu-hevc", > + .data = &hevc_cmu_info, > + }, { > + .compatible = "samsung,exynos5433-cmu-isp", > + .data = &isp_cmu_info, > + }, { > + .compatible = "samsung,exynos5433-cmu-mscl", > + .data = &mscl_cmu_info, > + }, { > + }, > +}; > + > +static const struct dev_pm_ops exynos5433_cmu_pm_ops = { > + SET_RUNTIME_PM_OPS(exynos5433_cmu_suspend, exynos5433_cmu_resume, > + NULL) > + SET_LATE_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, > + pm_runtime_force_resume) > +}; > + > +static struct platform_driver exynos5433_cmu_driver __refdata = { > + .driver = { > + .name = "exynos5433-cmu", > + .of_match_table = exynos5433_cmu_of_match, > + .suppress_bind_attrs = true, > + .pm = &exynos5433_cmu_pm_ops, > + }, > + .probe = exynos5433_cmu_probe, > }; > > -static void __init exynos5433_cmu_cam1_init(struct device_node *np) > +static int __init exynos5433_cmu_init(void) > { > - samsung_cmu_register_one(np, &cam1_cmu_info); > + return platform_driver_register(&exynos5433_cmu_driver); > } > -CLK_OF_DECLARE(exynos5433_cmu_cam1, "samsung,exynos5433-cmu-cam1", > - exynos5433_cmu_cam1_init); > +core_initcall(exynos5433_cmu_init); > diff --git a/drivers/clk/samsung/clk.h b/drivers/clk/samsung/clk.h > index f0acae4f5d1b..d93031e94387 100644 > --- a/drivers/clk/samsung/clk.h > +++ b/drivers/clk/samsung/clk.h > @@ -353,6 +353,12 @@ struct samsung_cmu_info { > /* list and number of clocks registers */ > const unsigned long *clk_regs; > unsigned int nr_clk_regs; > + > + /* list and number of clocks registers to set before suspend */ > + const struct samsung_clk_reg_dump *suspend_regs; > + unsigned int nr_suspend_regs; > + /* name of the parent clock needed for CMU register access */ > + const char *clk_name; > }; > > extern struct samsung_clk_provider *__init samsung_clk_init( > -- > 1.9.1 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- Best Regards, Chanwoo Choi Samsung Electronics -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Krzysztof, On 2017-08-08 18:11, Krzysztof Kozlowski wrote: > On Fri, Aug 04, 2017 at 11:34:53AM +0200, Marek Szyprowski wrote: >> Add runtime pm support for all clock controller units (CMU), which belongs > s/belongs/belong/ > >> to power domains and require special handling during on/off operations. >> Typically special values has to be written to MUX registers to change >> internal clocks parents to OSC clock before turning power off. During such >> operation all clocks, which enters CMU has to be enabled to let MUX to > s/enters/enter/ > > Beside that, how about unifying the title with previous mail ("Add > support for runtime PM")? > >> stabilize. Also for each CMU there is one special parent clock, which has >> to be enabled all the time when any access to CMU registers is done. >> >> This patch solves most of the mysterious external abort and freeze issues >> caused by a lack of proper parent CMU clock enabled or incorrect turn off >> procedure. >> >> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> >> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> >> --- >> .../devicetree/bindings/clock/exynos5433-clock.txt | 16 + >> drivers/clk/samsung/clk-exynos5433.c | 409 ++++++++++++++++----- >> drivers/clk/samsung/clk.h | 6 + >> 3 files changed, 346 insertions(+), 85 deletions(-) >> > Looks okay for me, few minor nits below and: > Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> > > >> diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt >> index 1dc80f8811fe..5c7dd12e667a 100644 >> --- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt >> +++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt >> @@ -168,6 +168,11 @@ Required Properties: >> - aclk_cam1_400 >> - aclk_cam1_552 >> >> +Optional properties: >> + - power-domains: a phandle to respective power domain node as described by >> + generic PM domain bindings (see power/power_domain.txt for more >> + information). >> + >> Each clock is assigned an identifier and client nodes can use this identifier >> to specify the clock which they consume. >> >> @@ -270,6 +275,7 @@ Example 2: Examples of clock controller nodes are listed below. >> clocks = <&xxti>, >> <&cmu_top CLK_ACLK_G2D_266>, >> <&cmu_top CLK_ACLK_G2D_400>; >> + power-domains = <&pd_g2d>; >> }; >> >> cmu_disp: clock-controller@13b90000 { >> @@ -295,6 +301,7 @@ Example 2: Examples of clock controller nodes are listed below. >> <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>, >> <&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>, >> <&cmu_mif CLK_ACLK_DISP_333>; >> + power-domains = <&pd_disp>; >> }; >> >> cmu_aud: clock-controller@114c0000 { >> @@ -304,6 +311,7 @@ Example 2: Examples of clock controller nodes are listed below. >> >> clock-names = "oscclk", "fout_aud_pll"; >> clocks = <&xxti>, <&cmu_top CLK_FOUT_AUD_PLL>; >> + power-domains = <&pd_aud>; >> }; >> >> cmu_bus0: clock-controller@13600000 { >> @@ -340,6 +348,7 @@ Example 2: Examples of clock controller nodes are listed below. >> >> clock-names = "oscclk", "aclk_g3d_400"; >> clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>; >> + power-domains = <&pd_g3d>; >> }; >> >> cmu_gscl: clock-controller@13cf0000 { >> @@ -353,6 +362,7 @@ Example 2: Examples of clock controller nodes are listed below. >> clocks = <&xxti>, >> <&cmu_top CLK_ACLK_GSCL_111>, >> <&cmu_top CLK_ACLK_GSCL_333>; >> + power-domains = <&pd_gscl>; >> }; >> >> cmu_apollo: clock-controller@11900000 { >> @@ -384,6 +394,7 @@ Example 2: Examples of clock controller nodes are listed below. >> clocks = <&xxti>, >> <&cmu_top CLK_SCLK_JPEG_MSCL>, >> <&cmu_top CLK_ACLK_MSCL_400>; >> + power-domains = <&pd_mscl>; >> }; >> >> cmu_mfc: clock-controller@15280000 { >> @@ -393,6 +404,7 @@ Example 2: Examples of clock controller nodes are listed below. >> >> clock-names = "oscclk", "aclk_mfc_400"; >> clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>; >> + power-domains = <&pd_mfc>; >> }; >> >> cmu_hevc: clock-controller@14f80000 { >> @@ -402,6 +414,7 @@ Example 2: Examples of clock controller nodes are listed below. >> >> clock-names = "oscclk", "aclk_hevc_400"; >> clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>; >> + power-domains = <&pd_hevc>; >> }; >> >> cmu_isp: clock-controller@146d0000 { >> @@ -415,6 +428,7 @@ Example 2: Examples of clock controller nodes are listed below. >> clocks = <&xxti>, >> <&cmu_top CLK_ACLK_ISP_DIS_400>, >> <&cmu_top CLK_ACLK_ISP_400>; >> + power-domains = <&pd_isp>; >> }; >> >> cmu_cam0: clock-controller@120d0000 { >> @@ -430,6 +444,7 @@ Example 2: Examples of clock controller nodes are listed below. >> <&cmu_top CLK_ACLK_CAM0_333>, >> <&cmu_top CLK_ACLK_CAM0_400>, >> <&cmu_top CLK_ACLK_CAM0_552>; >> + power-domains = <&pd_cam0>; >> }; >> >> cmu_cam1: clock-controller@145d0000 { >> @@ -451,6 +466,7 @@ Example 2: Examples of clock controller nodes are listed below. >> <&cmu_top CLK_ACLK_CAM1_333>, >> <&cmu_top CLK_ACLK_CAM1_400>, >> <&cmu_top CLK_ACLK_CAM1_552>; >> + power-domains = <&pd_cam1>; >> }; >> >> Example 3: UART controller node that consumes the clock generated by the clock >> diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c >> index 11343a597093..7ae9bccb1192 100644 >> --- a/drivers/clk/samsung/clk-exynos5433.c >> +++ b/drivers/clk/samsung/clk-exynos5433.c >> @@ -9,9 +9,14 @@ >> * Common Clock Framework support for Exynos5433 SoC. >> */ >> >> +#include <linux/clk.h> >> #include <linux/clk-provider.h> >> #include <linux/of.h> >> #include <linux/of_address.h> >> +#include <linux/of_device.h> >> +#include <linux/platform_device.h> >> +#include <linux/pm_runtime.h> >> +#include <linux/slab.h> > Why you need slab.h? It was needed for kzalloc, which was later converted to devm_kzalloc. Maybe it would make sense to include "linux/device.h" then to avoid indirect inclusion. >> #include <dt-bindings/clock/exynos5433.h> >> >> @@ -1991,6 +1996,14 @@ static void __init exynos5433_cmu_peris_init(struct device_node *np) >> ENABLE_IP_FSYS1, >> }; >> >> +static const struct samsung_clk_reg_dump fsys_suspend_regs[] = { >> + { MUX_SEL_FSYS0, 0 }, >> + { MUX_SEL_FSYS1, 0 }, >> + { MUX_SEL_FSYS2, 0 }, >> + { MUX_SEL_FSYS3, 0 }, >> + { MUX_SEL_FSYS4, 0 }, >> +}; >> + >> static const struct samsung_fixed_rate_clock fsys_fixed_clks[] __initconst = { >> /* PHY clocks from USBDRD30_PHY */ >> FRATE(CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY, >> @@ -2296,16 +2309,11 @@ static void __init exynos5433_cmu_peris_init(struct device_node *np) >> .nr_clk_ids = FSYS_NR_CLK, >> .clk_regs = fsys_clk_regs, >> .nr_clk_regs = ARRAY_SIZE(fsys_clk_regs), >> + .suspend_regs = fsys_suspend_regs, >> + .nr_suspend_regs = ARRAY_SIZE(fsys_suspend_regs), >> + .clk_name = "aclk_fsys_200", >> }; >> >> -static void __init exynos5433_cmu_fsys_init(struct device_node *np) >> -{ >> - samsung_cmu_register_one(np, &fsys_cmu_info); >> -} >> - >> -CLK_OF_DECLARE(exynos5433_cmu_fsys, "samsung,exynos5433-cmu-fsys", >> - exynos5433_cmu_fsys_init); >> - >> /* >> * Register offset definitions for CMU_G2D >> */ >> @@ -2335,6 +2343,10 @@ static void __init exynos5433_cmu_fsys_init(struct device_node *np) >> DIV_ENABLE_IP_G2D_SECURE_SMMU_G2D, >> }; >> >> +static const struct samsung_clk_reg_dump g2d_suspend_regs[] = { >> + { MUX_SEL_G2D0, 0 }, >> +}; >> + >> /* list of all parent clock list */ >> PNAME(mout_aclk_g2d_266_user_p) = { "oscclk", "aclk_g2d_266", }; >> PNAME(mout_aclk_g2d_400_user_p) = { "oscclk", "aclk_g2d_400", }; >> @@ -2420,16 +2432,11 @@ static void __init exynos5433_cmu_fsys_init(struct device_node *np) >> .nr_clk_ids = G2D_NR_CLK, >> .clk_regs = g2d_clk_regs, >> .nr_clk_regs = ARRAY_SIZE(g2d_clk_regs), >> + .suspend_regs = g2d_suspend_regs, >> + .nr_suspend_regs = ARRAY_SIZE(g2d_suspend_regs), >> + .clk_name = "aclk_g2d_400", >> }; >> >> -static void __init exynos5433_cmu_g2d_init(struct device_node *np) >> -{ >> - samsung_cmu_register_one(np, &g2d_cmu_info); >> -} >> - >> -CLK_OF_DECLARE(exynos5433_cmu_g2d, "samsung,exynos5433-cmu-g2d", >> - exynos5433_cmu_g2d_init); >> - >> /* >> * Register offset definitions for CMU_DISP >> */ >> @@ -2494,6 +2501,18 @@ static void __init exynos5433_cmu_g2d_init(struct device_node *np) >> CLKOUT_CMU_DISP_DIV_STAT, >> }; >> >> +static const struct samsung_clk_reg_dump disp_suspend_regs[] = { >> + /* PLL has to be enabled for suspend */ >> + { DISP_PLL_CON0, 0x85f40502 }, >> + /* ignore status of external PHY muxes during suspend to avoid hangs */ >> + { MUX_IGNORE_DISP2, 0x00111111 }, >> + { MUX_SEL_DISP0, 0 }, >> + { MUX_SEL_DISP1, 0 }, >> + { MUX_SEL_DISP2, 0 }, >> + { MUX_SEL_DISP3, 0 }, >> + { MUX_SEL_DISP4, 0 }, >> +}; >> + >> /* list of all parent clock list */ >> PNAME(mout_disp_pll_p) = { "oscclk", "fout_disp_pll", }; >> PNAME(mout_sclk_dsim1_user_p) = { "oscclk", "sclk_dsim1_disp", }; >> @@ -2841,16 +2860,11 @@ static void __init exynos5433_cmu_g2d_init(struct device_node *np) >> .nr_clk_ids = DISP_NR_CLK, >> .clk_regs = disp_clk_regs, >> .nr_clk_regs = ARRAY_SIZE(disp_clk_regs), >> + .suspend_regs = disp_suspend_regs, >> + .nr_suspend_regs = ARRAY_SIZE(disp_suspend_regs), >> + .clk_name = "aclk_disp_333", >> }; >> >> -static void __init exynos5433_cmu_disp_init(struct device_node *np) >> -{ >> - samsung_cmu_register_one(np, &disp_cmu_info); >> -} >> - >> -CLK_OF_DECLARE(exynos5433_cmu_disp, "samsung,exynos5433-cmu-disp", >> - exynos5433_cmu_disp_init); >> - >> /* >> * Register offset definitions for CMU_AUD >> */ >> @@ -2885,6 +2899,11 @@ static void __init exynos5433_cmu_disp_init(struct device_node *np) >> ENABLE_IP_AUD1, >> }; >> >> +static const struct samsung_clk_reg_dump aud_suspend_regs[] = { >> + { MUX_SEL_AUD0, 0 }, >> + { MUX_SEL_AUD1, 0 }, >> +}; >> + >> /* list of all parent clock list */ >> PNAME(mout_aud_pll_user_aud_p) = { "oscclk", "fout_aud_pll", }; >> PNAME(mout_sclk_aud_pcm_p) = { "mout_aud_pll_user", "ioclk_audiocdclk0",}; >> @@ -3011,16 +3030,11 @@ static void __init exynos5433_cmu_disp_init(struct device_node *np) >> .nr_clk_ids = AUD_NR_CLK, >> .clk_regs = aud_clk_regs, >> .nr_clk_regs = ARRAY_SIZE(aud_clk_regs), >> + .suspend_regs = aud_suspend_regs, >> + .nr_suspend_regs = ARRAY_SIZE(aud_suspend_regs), >> + .clk_name = "fout_aud_pll", >> }; >> >> -static void __init exynos5433_cmu_aud_init(struct device_node *np) >> -{ >> - samsung_cmu_register_one(np, &aud_cmu_info); >> -} >> -CLK_OF_DECLARE(exynos5433_cmu_aud, "samsung,exynos5433-cmu-aud", >> - exynos5433_cmu_aud_init); >> - >> - >> /* >> * Register offset definitions for CMU_BUS{0|1|2} >> */ >> @@ -3222,6 +3236,10 @@ static void __init exynos5433_cmu_aud_init(struct device_node *np) >> CLK_STOPCTRL, >> }; >> >> +static const struct samsung_clk_reg_dump g3d_suspend_regs[] = { >> + { MUX_SEL_G3D, 0 }, >> +}; >> + >> /* list of all parent clock list */ >> PNAME(mout_aclk_g3d_400_p) = { "mout_g3d_pll", "aclk_g3d_400", }; >> PNAME(mout_g3d_pll_p) = { "oscclk", "fout_g3d_pll", }; >> @@ -3295,15 +3313,11 @@ static void __init exynos5433_cmu_aud_init(struct device_node *np) >> .nr_clk_ids = G3D_NR_CLK, >> .clk_regs = g3d_clk_regs, >> .nr_clk_regs = ARRAY_SIZE(g3d_clk_regs), >> + .suspend_regs = g3d_suspend_regs, >> + .nr_suspend_regs = ARRAY_SIZE(g3d_suspend_regs), >> + .clk_name = "aclk_g3d_400", >> }; >> >> -static void __init exynos5433_cmu_g3d_init(struct device_node *np) >> -{ >> - samsung_cmu_register_one(np, &g3d_cmu_info); >> -} >> -CLK_OF_DECLARE(exynos5433_cmu_g3d, "samsung,exynos5433-cmu-g3d", >> - exynos5433_cmu_g3d_init); >> - >> /* >> * Register offset definitions for CMU_GSCL >> */ >> @@ -3342,6 +3356,12 @@ static void __init exynos5433_cmu_g3d_init(struct device_node *np) >> ENABLE_IP_GSCL_SECURE_SMMU_GSCL2, >> }; >> >> +static const struct samsung_clk_reg_dump gscl_suspend_regs[] = { >> + { MUX_SEL_GSCL, 0 }, >> + { ENABLE_ACLK_GSCL, 0xfff }, >> + { ENABLE_PCLK_GSCL, 0xff }, >> +}; >> + >> /* list of all parent clock list */ >> PNAME(aclk_gscl_111_user_p) = { "oscclk", "aclk_gscl_111", }; >> PNAME(aclk_gscl_333_user_p) = { "oscclk", "aclk_gscl_333", }; >> @@ -3436,15 +3456,11 @@ static void __init exynos5433_cmu_g3d_init(struct device_node *np) >> .nr_clk_ids = GSCL_NR_CLK, >> .clk_regs = gscl_clk_regs, >> .nr_clk_regs = ARRAY_SIZE(gscl_clk_regs), >> + .suspend_regs = gscl_suspend_regs, >> + .nr_suspend_regs = ARRAY_SIZE(gscl_suspend_regs), >> + .clk_name = "aclk_gscl_111", >> }; >> >> -static void __init exynos5433_cmu_gscl_init(struct device_node *np) >> -{ >> - samsung_cmu_register_one(np, &gscl_cmu_info); >> -} >> -CLK_OF_DECLARE(exynos5433_cmu_gscl, "samsung,exynos5433-cmu-gscl", >> - exynos5433_cmu_gscl_init); >> - >> /* >> * Register offset definitions for CMU_APOLLO >> */ >> @@ -3970,6 +3986,11 @@ static void __init exynos5433_cmu_atlas_init(struct device_node *np) >> ENABLE_IP_MSCL_SECURE_SMMU_JPEG, >> }; >> >> +static const struct samsung_clk_reg_dump mscl_suspend_regs[] = { >> + { MUX_SEL_MSCL0, 0 }, >> + { MUX_SEL_MSCL1, 0 }, >> +}; >> + >> /* list of all parent clock list */ >> PNAME(mout_sclk_jpeg_user_p) = { "oscclk", "sclk_jpeg_mscl", }; >> PNAME(mout_aclk_mscl_400_user_p) = { "oscclk", "aclk_mscl_400", }; >> @@ -4082,15 +4103,11 @@ static void __init exynos5433_cmu_atlas_init(struct device_node *np) >> .nr_clk_ids = MSCL_NR_CLK, >> .clk_regs = mscl_clk_regs, >> .nr_clk_regs = ARRAY_SIZE(mscl_clk_regs), >> + .suspend_regs = mscl_suspend_regs, >> + .nr_suspend_regs = ARRAY_SIZE(mscl_suspend_regs), >> + .clk_name = "aclk_mscl_400", >> }; >> >> -static void __init exynos5433_cmu_mscl_init(struct device_node *np) >> -{ >> - samsung_cmu_register_one(np, &mscl_cmu_info); >> -} >> -CLK_OF_DECLARE(exynos5433_cmu_mscl, "samsung,exynos5433-cmu-mscl", >> - exynos5433_cmu_mscl_init); >> - >> /* >> * Register offset definitions for CMU_MFC >> */ >> @@ -4120,6 +4137,10 @@ static void __init exynos5433_cmu_mscl_init(struct device_node *np) >> ENABLE_IP_MFC_SECURE_SMMU_MFC, >> }; >> >> +static const struct samsung_clk_reg_dump mfc_suspend_regs[] = { >> + { MUX_SEL_MFC, 0 }, >> +}; >> + >> PNAME(mout_aclk_mfc_400_user_p) = { "oscclk", "aclk_mfc_400", }; >> >> static const struct samsung_mux_clock mfc_mux_clks[] __initconst = { >> @@ -4190,15 +4211,11 @@ static void __init exynos5433_cmu_mscl_init(struct device_node *np) >> .nr_clk_ids = MFC_NR_CLK, >> .clk_regs = mfc_clk_regs, >> .nr_clk_regs = ARRAY_SIZE(mfc_clk_regs), >> + .suspend_regs = mfc_suspend_regs, >> + .nr_suspend_regs = ARRAY_SIZE(mfc_suspend_regs), >> + .clk_name = "aclk_mfc_400", >> }; >> >> -static void __init exynos5433_cmu_mfc_init(struct device_node *np) >> -{ >> - samsung_cmu_register_one(np, &mfc_cmu_info); >> -} >> -CLK_OF_DECLARE(exynos5433_cmu_mfc, "samsung,exynos5433-cmu-mfc", >> - exynos5433_cmu_mfc_init); >> - >> /* >> * Register offset definitions for CMU_HEVC >> */ >> @@ -4228,6 +4245,10 @@ static void __init exynos5433_cmu_mfc_init(struct device_node *np) >> ENABLE_IP_HEVC_SECURE_SMMU_HEVC, >> }; >> >> +static const struct samsung_clk_reg_dump hevc_suspend_regs[] = { >> + { MUX_SEL_HEVC, 0 }, >> +}; >> + >> PNAME(mout_aclk_hevc_400_user_p) = { "oscclk", "aclk_hevc_400", }; >> >> static const struct samsung_mux_clock hevc_mux_clks[] __initconst = { >> @@ -4300,15 +4321,11 @@ static void __init exynos5433_cmu_mfc_init(struct device_node *np) >> .nr_clk_ids = HEVC_NR_CLK, >> .clk_regs = hevc_clk_regs, >> .nr_clk_regs = ARRAY_SIZE(hevc_clk_regs), >> + .suspend_regs = hevc_suspend_regs, >> + .nr_suspend_regs = ARRAY_SIZE(hevc_suspend_regs), >> + .clk_name = "aclk_hevc_400", >> }; >> >> -static void __init exynos5433_cmu_hevc_init(struct device_node *np) >> -{ >> - samsung_cmu_register_one(np, &hevc_cmu_info); >> -} >> -CLK_OF_DECLARE(exynos5433_cmu_hevc, "samsung,exynos5433-cmu-hevc", >> - exynos5433_cmu_hevc_init); >> - >> /* >> * Register offset definitions for CMU_ISP >> */ >> @@ -4342,6 +4359,10 @@ static void __init exynos5433_cmu_hevc_init(struct device_node *np) >> ENABLE_IP_ISP3, >> }; >> >> +static const struct samsung_clk_reg_dump isp_suspend_regs[] = { >> + { MUX_SEL_ISP, 0 }, >> +}; >> + >> PNAME(mout_aclk_isp_dis_400_user_p) = { "oscclk", "aclk_isp_dis_400", }; >> PNAME(mout_aclk_isp_400_user_p) = { "oscclk", "aclk_isp_400", }; >> >> @@ -4553,15 +4574,11 @@ static void __init exynos5433_cmu_hevc_init(struct device_node *np) >> .nr_clk_ids = ISP_NR_CLK, >> .clk_regs = isp_clk_regs, >> .nr_clk_regs = ARRAY_SIZE(isp_clk_regs), >> + .suspend_regs = isp_suspend_regs, >> + .nr_suspend_regs = ARRAY_SIZE(isp_suspend_regs), >> + .clk_name = "aclk_isp_400", >> }; >> >> -static void __init exynos5433_cmu_isp_init(struct device_node *np) >> -{ >> - samsung_cmu_register_one(np, &isp_cmu_info); >> -} >> -CLK_OF_DECLARE(exynos5433_cmu_isp, "samsung,exynos5433-cmu-isp", >> - exynos5433_cmu_isp_init); >> - >> /* >> * Register offset definitions for CMU_CAM0 >> */ >> @@ -4625,6 +4642,15 @@ static void __init exynos5433_cmu_isp_init(struct device_node *np) >> ENABLE_IP_CAM02, >> ENABLE_IP_CAM03, >> }; >> + >> +static const struct samsung_clk_reg_dump cam0_suspend_regs[] = { >> + { MUX_SEL_CAM00, 0 }, >> + { MUX_SEL_CAM01, 0 }, >> + { MUX_SEL_CAM02, 0 }, >> + { MUX_SEL_CAM03, 0 }, >> + { MUX_SEL_CAM04, 0 }, >> +}; >> + >> PNAME(mout_aclk_cam0_333_user_p) = { "oscclk", "aclk_cam0_333", }; >> PNAME(mout_aclk_cam0_400_user_p) = { "oscclk", "aclk_cam0_400", }; >> PNAME(mout_aclk_cam0_552_user_p) = { "oscclk", "aclk_cam0_552", }; >> @@ -5030,15 +5056,11 @@ static void __init exynos5433_cmu_isp_init(struct device_node *np) >> .nr_clk_ids = CAM0_NR_CLK, >> .clk_regs = cam0_clk_regs, >> .nr_clk_regs = ARRAY_SIZE(cam0_clk_regs), >> + .suspend_regs = cam0_suspend_regs, >> + .nr_suspend_regs = ARRAY_SIZE(cam0_suspend_regs), >> + .clk_name = "aclk_cam0_400", >> }; >> >> -static void __init exynos5433_cmu_cam0_init(struct device_node *np) >> -{ >> - samsung_cmu_register_one(np, &cam0_cmu_info); >> -} >> -CLK_OF_DECLARE(exynos5433_cmu_cam0, "samsung,exynos5433-cmu-cam0", >> - exynos5433_cmu_cam0_init); >> - >> /* >> * Register offset definitions for CMU_CAM1 >> */ >> @@ -5085,6 +5107,12 @@ static void __init exynos5433_cmu_cam0_init(struct device_node *np) >> ENABLE_IP_CAM12, >> }; >> >> +static const struct samsung_clk_reg_dump cam1_suspend_regs[] = { >> + { MUX_SEL_CAM10, 0 }, >> + { MUX_SEL_CAM11, 0 }, >> + { MUX_SEL_CAM12, 0 }, >> +}; >> + >> PNAME(mout_sclk_isp_uart_user_p) = { "oscclk", "sclk_isp_uart_cam1", }; >> PNAME(mout_sclk_isp_spi1_user_p) = { "oscclk", "sclk_isp_spi1_cam1", }; >> PNAME(mout_sclk_isp_spi0_user_p) = { "oscclk", "sclk_isp_spi0_cam1", }; >> @@ -5403,11 +5431,222 @@ static void __init exynos5433_cmu_cam0_init(struct device_node *np) >> .nr_clk_ids = CAM1_NR_CLK, >> .clk_regs = cam1_clk_regs, >> .nr_clk_regs = ARRAY_SIZE(cam1_clk_regs), >> + .suspend_regs = cam1_suspend_regs, >> + .nr_suspend_regs = ARRAY_SIZE(cam1_suspend_regs), >> + .clk_name = "aclk_cam1_400", >> +}; >> + >> + >> +struct exynos5433_cmu_data { >> + struct samsung_clk_reg_dump *clk_save; >> + unsigned int nr_clk_save; >> + const struct samsung_clk_reg_dump *clk_suspend; >> + unsigned int nr_clk_suspend; >> + >> + struct clk *clk; >> + struct clk **pclks; >> + int nr_pclks; >> + >> + /* must be the last entry */ >> + struct samsung_clk_provider ctx; >> +}; >> + >> +static int exynos5433_cmu_suspend(struct device *dev) >> +{ >> + struct exynos5433_cmu_data *data = dev_get_drvdata(dev); >> + int i; >> + >> + samsung_clk_save(data->ctx.reg_base, data->clk_save, >> + data->nr_clk_save); >> + >> + for (i = 0; i < data->nr_pclks; i++) >> + clk_prepare_enable(data->pclks[i]); >> + >> + samsung_clk_restore(data->ctx.reg_base, data->clk_suspend, >> + data->nr_clk_suspend); > This looks surprising and requires one to read the commit message to get > the idea. How about adding a comment why this is not usual save > operation? Okay, I will add a comment that before suspend, some registers has to be set to certain values stored in data->clk_suspend array. >> + >> + for (i = 0; i < data->nr_pclks; i++) >> + clk_disable_unprepare(data->pclks[i]); >> + >> + clk_disable_unprepare(data->clk); >> + >> + return 0; >> +} >> + >> +static int exynos5433_cmu_resume(struct device *dev) >> +{ >> + struct exynos5433_cmu_data *data = dev_get_drvdata(dev); >> + int i; >> + >> + clk_prepare_enable(data->clk); >> + >> + for (i = 0; i < data->nr_pclks; i++) >> + clk_prepare_enable(data->pclks[i]); >> + >> + samsung_clk_restore(data->ctx.reg_base, data->clk_save, >> + data->nr_clk_save); >> + >> + for (i = 0; i < data->nr_pclks; i++) >> + clk_disable_unprepare(data->pclks[i]); >> + >> + return 0; >> +} >> + >> +static int __init exynos5433_cmu_probe(struct platform_device *pdev) >> +{ >> + const struct samsung_cmu_info *info; >> + struct exynos5433_cmu_data *data; >> + struct samsung_clk_provider *ctx; >> + struct device *dev = &pdev->dev; >> + struct resource *res; >> + void __iomem *reg_base; >> + int i; >> + >> + info = of_device_get_match_data(dev); >> + >> + data = devm_kzalloc(dev, sizeof(*data) + >> + sizeof(*data->ctx.clk_data.hws) * info->nr_clk_ids, >> + GFP_KERNEL); >> + if (!data) >> + return -ENOMEM; >> + ctx = &data->ctx; >> + >> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); >> + reg_base = devm_ioremap_resource(dev, res); >> + if (IS_ERR(reg_base)) { >> + dev_err(dev, "failed to map registers\n"); >> + return PTR_ERR(reg_base); >> + } >> + >> + for (i = 0; i < info->nr_clk_ids; ++i) >> + ctx->clk_data.hws[i] = ERR_PTR(-ENOENT); >> + >> + ctx->clk_data.num = info->nr_clk_ids; >> + ctx->reg_base = reg_base; >> + ctx->dev = dev; >> + spin_lock_init(&ctx->lock); >> + >> + data->clk_save = samsung_clk_alloc_reg_dump(info->clk_regs, >> + info->nr_clk_regs); >> + data->nr_clk_save = info->nr_clk_regs; >> + data->clk_suspend = info->suspend_regs; >> + data->nr_clk_suspend = info->nr_suspend_regs; >> + data->nr_pclks = of_count_phandle_with_args(dev->of_node, "clocks", >> + "#clock-cells"); >> + if (data->nr_pclks > 0) { >> + data->pclks = devm_kcalloc(dev, sizeof(struct clk *), >> + data->nr_pclks, GFP_KERNEL); >> + >> + for (i = 0; i < data->nr_pclks; i++) { >> + struct clk *clk = of_clk_get(dev->of_node, i); >> + >> + if (IS_ERR(clk)) >> + return PTR_ERR(clk); >> + data->pclks[i] = clk; >> + } >> + } >> + >> + if (info->clk_name) >> + data->clk = clk_get(dev, info->clk_name); >> + clk_prepare_enable(data->clk); >> + >> + platform_set_drvdata(pdev, data); >> + >> + /* >> + * Enable runtime PM here to allow the clock core using runtime PM >> + * for the registered clocks. Additionally, we increase the runtime >> + * PM usage count before registering the clocks, to prevent the >> + * clock core from runtime suspending the device. >> + */ >> + pm_runtime_get_noresume(dev); >> + pm_runtime_set_active(dev); >> + pm_runtime_enable(dev); >> + >> + if (info->pll_clks) >> + samsung_clk_register_pll(ctx, info->pll_clks, info->nr_pll_clks, >> + reg_base); >> + if (info->mux_clks) >> + samsung_clk_register_mux(ctx, info->mux_clks, >> + info->nr_mux_clks); >> + if (info->div_clks) >> + samsung_clk_register_div(ctx, info->div_clks, >> + info->nr_div_clks); >> + if (info->gate_clks) >> + samsung_clk_register_gate(ctx, info->gate_clks, >> + info->nr_gate_clks); >> + if (info->fixed_clks) >> + samsung_clk_register_fixed_rate(ctx, info->fixed_clks, >> + info->nr_fixed_clks); >> + if (info->fixed_factor_clks) >> + samsung_clk_register_fixed_factor(ctx, info->fixed_factor_clks, >> + info->nr_fixed_factor_clks); >> + >> + samsung_clk_of_add_provider(dev->of_node, ctx); >> + pm_runtime_put_sync(dev); >> + >> + return 0; >> +} >> + >> +static const struct of_device_id exynos5433_cmu_of_match[] = { > Since this is used only when matching devices maybe it can be also > marked as refdata? It is indirectly used by of_device_get_match_data() in probe(). I'm not sure if this would be fine for refdata. > Best regards, > Krzysztof > >> + { >> + .compatible = "samsung,exynos5433-cmu-aud", >> + .data = &aud_cmu_info, >> + }, { >> + .compatible = "samsung,exynos5433-cmu-cam0", >> + .data = &cam0_cmu_info, >> + }, { >> + .compatible = "samsung,exynos5433-cmu-cam1", >> + .data = &cam1_cmu_info, >> + }, { >> + .compatible = "samsung,exynos5433-cmu-disp", >> + .data = &disp_cmu_info, >> + }, { >> + .compatible = "samsung,exynos5433-cmu-g2d", >> + .data = &g2d_cmu_info, >> + }, { >> + .compatible = "samsung,exynos5433-cmu-g3d", >> + .data = &g3d_cmu_info, >> + }, { >> + .compatible = "samsung,exynos5433-cmu-fsys", >> + .data = &fsys_cmu_info, >> + }, { >> + .compatible = "samsung,exynos5433-cmu-gscl", >> + .data = &gscl_cmu_info, >> + }, { >> + .compatible = "samsung,exynos5433-cmu-mfc", >> + .data = &mfc_cmu_info, >> + }, { >> + .compatible = "samsung,exynos5433-cmu-hevc", >> + .data = &hevc_cmu_info, >> + }, { >> + .compatible = "samsung,exynos5433-cmu-isp", >> + .data = &isp_cmu_info, >> + }, { >> + .compatible = "samsung,exynos5433-cmu-mscl", >> + .data = &mscl_cmu_info, >> + }, { >> + }, >> +}; >> + >> +static const struct dev_pm_ops exynos5433_cmu_pm_ops = { >> + SET_RUNTIME_PM_OPS(exynos5433_cmu_suspend, exynos5433_cmu_resume, >> + NULL) >> + SET_LATE_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, >> + pm_runtime_force_resume) >> +}; >> + >> +static struct platform_driver exynos5433_cmu_driver __refdata = { >> + .driver = { >> + .name = "exynos5433-cmu", >> + .of_match_table = exynos5433_cmu_of_match, >> + .suppress_bind_attrs = true, >> + .pm = &exynos5433_cmu_pm_ops, >> + }, >> + .probe = exynos5433_cmu_probe, >> }; >> >> -static void __init exynos5433_cmu_cam1_init(struct device_node *np) >> +static int __init exynos5433_cmu_init(void) >> { >> - samsung_cmu_register_one(np, &cam1_cmu_info); >> + return platform_driver_register(&exynos5433_cmu_driver); >> } >> -CLK_OF_DECLARE(exynos5433_cmu_cam1, "samsung,exynos5433-cmu-cam1", >> - exynos5433_cmu_cam1_init); >> +core_initcall(exynos5433_cmu_init); >> diff --git a/drivers/clk/samsung/clk.h b/drivers/clk/samsung/clk.h >> index f0acae4f5d1b..d93031e94387 100644 >> --- a/drivers/clk/samsung/clk.h >> +++ b/drivers/clk/samsung/clk.h >> @@ -353,6 +353,12 @@ struct samsung_cmu_info { >> /* list and number of clocks registers */ >> const unsigned long *clk_regs; >> unsigned int nr_clk_regs; >> + >> + /* list and number of clocks registers to set before suspend */ >> + const struct samsung_clk_reg_dump *suspend_regs; >> + unsigned int nr_suspend_regs; >> + /* name of the parent clock needed for CMU register access */ >> + const char *clk_name; >> }; >> >> extern struct samsung_clk_provider *__init samsung_clk_init( >> -- >> 1.9.1 >> Best regards -- Marek Szyprowski, PhD Samsung R&D Institute Poland -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Aug 9, 2017 at 10:19 AM, Marek Szyprowski <m.szyprowski@samsung.com> wrote: > Hi Krzysztof, > > > On 2017-08-08 18:11, Krzysztof Kozlowski wrote: >> >> On Fri, Aug 04, 2017 at 11:34:53AM +0200, Marek Szyprowski wrote: >>> >>> Add runtime pm support for all clock controller units (CMU), which >>> belongs >> >> s/belongs/belong/ >> >>> to power domains and require special handling during on/off operations. >>> Typically special values has to be written to MUX registers to change >>> internal clocks parents to OSC clock before turning power off. During >>> such >>> operation all clocks, which enters CMU has to be enabled to let MUX to >> >> s/enters/enter/ >> >> Beside that, how about unifying the title with previous mail ("Add >> support for runtime PM")? >> >>> stabilize. Also for each CMU there is one special parent clock, which has >>> to be enabled all the time when any access to CMU registers is done. >>> >>> This patch solves most of the mysterious external abort and freeze issues >>> caused by a lack of proper parent CMU clock enabled or incorrect turn off >>> procedure. >>> >>> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> >>> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> >>> --- >>> .../devicetree/bindings/clock/exynos5433-clock.txt | 16 + >>> drivers/clk/samsung/clk-exynos5433.c | 409 >>> ++++++++++++++++----- >>> drivers/clk/samsung/clk.h | 6 + >>> 3 files changed, 346 insertions(+), 85 deletions(-) >>> >> Looks okay for me, few minor nits below and: >> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> >> >> >>> diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt >>> b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt >>> index 1dc80f8811fe..5c7dd12e667a 100644 >>> --- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt >>> +++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt >>> @@ -168,6 +168,11 @@ Required Properties: >>> - aclk_cam1_400 >>> - aclk_cam1_552 >>> +Optional properties: >>> + - power-domains: a phandle to respective power domain node as >>> described by >>> + generic PM domain bindings (see power/power_domain.txt for more >>> + information). >>> + >>> Each clock is assigned an identifier and client nodes can use this >>> identifier >>> to specify the clock which they consume. >>> @@ -270,6 +275,7 @@ Example 2: Examples of clock controller nodes are >>> listed below. >>> clocks = <&xxti>, >>> <&cmu_top CLK_ACLK_G2D_266>, >>> <&cmu_top CLK_ACLK_G2D_400>; >>> + power-domains = <&pd_g2d>; >>> }; >>> cmu_disp: clock-controller@13b90000 { >>> @@ -295,6 +301,7 @@ Example 2: Examples of clock controller nodes are >>> listed below. >>> <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>, >>> <&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>, >>> <&cmu_mif CLK_ACLK_DISP_333>; >>> + power-domains = <&pd_disp>; >>> }; >>> cmu_aud: clock-controller@114c0000 { >>> @@ -304,6 +311,7 @@ Example 2: Examples of clock controller nodes are >>> listed below. >>> clock-names = "oscclk", "fout_aud_pll"; >>> clocks = <&xxti>, <&cmu_top CLK_FOUT_AUD_PLL>; >>> + power-domains = <&pd_aud>; >>> }; >>> cmu_bus0: clock-controller@13600000 { >>> @@ -340,6 +348,7 @@ Example 2: Examples of clock controller nodes are >>> listed below. >>> clock-names = "oscclk", "aclk_g3d_400"; >>> clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>; >>> + power-domains = <&pd_g3d>; >>> }; >>> cmu_gscl: clock-controller@13cf0000 { >>> @@ -353,6 +362,7 @@ Example 2: Examples of clock controller nodes are >>> listed below. >>> clocks = <&xxti>, >>> <&cmu_top CLK_ACLK_GSCL_111>, >>> <&cmu_top CLK_ACLK_GSCL_333>; >>> + power-domains = <&pd_gscl>; >>> }; >>> cmu_apollo: clock-controller@11900000 { >>> @@ -384,6 +394,7 @@ Example 2: Examples of clock controller nodes are >>> listed below. >>> clocks = <&xxti>, >>> <&cmu_top CLK_SCLK_JPEG_MSCL>, >>> <&cmu_top CLK_ACLK_MSCL_400>; >>> + power-domains = <&pd_mscl>; >>> }; >>> cmu_mfc: clock-controller@15280000 { >>> @@ -393,6 +404,7 @@ Example 2: Examples of clock controller nodes are >>> listed below. >>> clock-names = "oscclk", "aclk_mfc_400"; >>> clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>; >>> + power-domains = <&pd_mfc>; >>> }; >>> cmu_hevc: clock-controller@14f80000 { >>> @@ -402,6 +414,7 @@ Example 2: Examples of clock controller nodes are >>> listed below. >>> clock-names = "oscclk", "aclk_hevc_400"; >>> clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>; >>> + power-domains = <&pd_hevc>; >>> }; >>> cmu_isp: clock-controller@146d0000 { >>> @@ -415,6 +428,7 @@ Example 2: Examples of clock controller nodes are >>> listed below. >>> clocks = <&xxti>, >>> <&cmu_top CLK_ACLK_ISP_DIS_400>, >>> <&cmu_top CLK_ACLK_ISP_400>; >>> + power-domains = <&pd_isp>; >>> }; >>> cmu_cam0: clock-controller@120d0000 { >>> @@ -430,6 +444,7 @@ Example 2: Examples of clock controller nodes are >>> listed below. >>> <&cmu_top CLK_ACLK_CAM0_333>, >>> <&cmu_top CLK_ACLK_CAM0_400>, >>> <&cmu_top CLK_ACLK_CAM0_552>; >>> + power-domains = <&pd_cam0>; >>> }; >>> cmu_cam1: clock-controller@145d0000 { >>> @@ -451,6 +466,7 @@ Example 2: Examples of clock controller nodes are >>> listed below. >>> <&cmu_top CLK_ACLK_CAM1_333>, >>> <&cmu_top CLK_ACLK_CAM1_400>, >>> <&cmu_top CLK_ACLK_CAM1_552>; >>> + power-domains = <&pd_cam1>; >>> }; >>> Example 3: UART controller node that consumes the clock generated by >>> the clock >>> diff --git a/drivers/clk/samsung/clk-exynos5433.c >>> b/drivers/clk/samsung/clk-exynos5433.c >>> index 11343a597093..7ae9bccb1192 100644 >>> --- a/drivers/clk/samsung/clk-exynos5433.c >>> +++ b/drivers/clk/samsung/clk-exynos5433.c >>> @@ -9,9 +9,14 @@ >>> * Common Clock Framework support for Exynos5433 SoC. >>> */ >>> +#include <linux/clk.h> >>> #include <linux/clk-provider.h> >>> #include <linux/of.h> >>> #include <linux/of_address.h> >>> +#include <linux/of_device.h> >>> +#include <linux/platform_device.h> >>> +#include <linux/pm_runtime.h> >>> +#include <linux/slab.h> >> >> Why you need slab.h? > > > It was needed for kzalloc, which was later converted to devm_kzalloc. Maybe > it would make sense to include "linux/device.h" then to avoid indirect > inclusion. platform_device.h pulls device.h so I think this could be removed. (...) >>> + >>> info->nr_fixed_factor_clks); >>> + >>> + samsung_clk_of_add_provider(dev->of_node, ctx); >>> + pm_runtime_put_sync(dev); >>> + >>> + return 0; >>> +} >>> + >>> +static const struct of_device_id exynos5433_cmu_of_match[] = { >> >> Since this is used only when matching devices maybe it can be also >> marked as refdata? > > > It is indirectly used by of_device_get_match_data() in probe(). I'm not sure > if this would be fine for refdata. Yes, right, it shouldn't be refdata then. Thanks for explanation. Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt index 1dc80f8811fe..5c7dd12e667a 100644 --- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt @@ -168,6 +168,11 @@ Required Properties: - aclk_cam1_400 - aclk_cam1_552 +Optional properties: + - power-domains: a phandle to respective power domain node as described by + generic PM domain bindings (see power/power_domain.txt for more + information). + Each clock is assigned an identifier and client nodes can use this identifier to specify the clock which they consume. @@ -270,6 +275,7 @@ Example 2: Examples of clock controller nodes are listed below. clocks = <&xxti>, <&cmu_top CLK_ACLK_G2D_266>, <&cmu_top CLK_ACLK_G2D_400>; + power-domains = <&pd_g2d>; }; cmu_disp: clock-controller@13b90000 { @@ -295,6 +301,7 @@ Example 2: Examples of clock controller nodes are listed below. <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>, <&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>, <&cmu_mif CLK_ACLK_DISP_333>; + power-domains = <&pd_disp>; }; cmu_aud: clock-controller@114c0000 { @@ -304,6 +311,7 @@ Example 2: Examples of clock controller nodes are listed below. clock-names = "oscclk", "fout_aud_pll"; clocks = <&xxti>, <&cmu_top CLK_FOUT_AUD_PLL>; + power-domains = <&pd_aud>; }; cmu_bus0: clock-controller@13600000 { @@ -340,6 +348,7 @@ Example 2: Examples of clock controller nodes are listed below. clock-names = "oscclk", "aclk_g3d_400"; clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>; + power-domains = <&pd_g3d>; }; cmu_gscl: clock-controller@13cf0000 { @@ -353,6 +362,7 @@ Example 2: Examples of clock controller nodes are listed below. clocks = <&xxti>, <&cmu_top CLK_ACLK_GSCL_111>, <&cmu_top CLK_ACLK_GSCL_333>; + power-domains = <&pd_gscl>; }; cmu_apollo: clock-controller@11900000 { @@ -384,6 +394,7 @@ Example 2: Examples of clock controller nodes are listed below. clocks = <&xxti>, <&cmu_top CLK_SCLK_JPEG_MSCL>, <&cmu_top CLK_ACLK_MSCL_400>; + power-domains = <&pd_mscl>; }; cmu_mfc: clock-controller@15280000 { @@ -393,6 +404,7 @@ Example 2: Examples of clock controller nodes are listed below. clock-names = "oscclk", "aclk_mfc_400"; clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>; + power-domains = <&pd_mfc>; }; cmu_hevc: clock-controller@14f80000 { @@ -402,6 +414,7 @@ Example 2: Examples of clock controller nodes are listed below. clock-names = "oscclk", "aclk_hevc_400"; clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>; + power-domains = <&pd_hevc>; }; cmu_isp: clock-controller@146d0000 { @@ -415,6 +428,7 @@ Example 2: Examples of clock controller nodes are listed below. clocks = <&xxti>, <&cmu_top CLK_ACLK_ISP_DIS_400>, <&cmu_top CLK_ACLK_ISP_400>; + power-domains = <&pd_isp>; }; cmu_cam0: clock-controller@120d0000 { @@ -430,6 +444,7 @@ Example 2: Examples of clock controller nodes are listed below. <&cmu_top CLK_ACLK_CAM0_333>, <&cmu_top CLK_ACLK_CAM0_400>, <&cmu_top CLK_ACLK_CAM0_552>; + power-domains = <&pd_cam0>; }; cmu_cam1: clock-controller@145d0000 { @@ -451,6 +466,7 @@ Example 2: Examples of clock controller nodes are listed below. <&cmu_top CLK_ACLK_CAM1_333>, <&cmu_top CLK_ACLK_CAM1_400>, <&cmu_top CLK_ACLK_CAM1_552>; + power-domains = <&pd_cam1>; }; Example 3: UART controller node that consumes the clock generated by the clock diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c index 11343a597093..7ae9bccb1192 100644 --- a/drivers/clk/samsung/clk-exynos5433.c +++ b/drivers/clk/samsung/clk-exynos5433.c @@ -9,9 +9,14 @@ * Common Clock Framework support for Exynos5433 SoC. */ +#include <linux/clk.h> #include <linux/clk-provider.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/slab.h> #include <dt-bindings/clock/exynos5433.h> @@ -1991,6 +1996,14 @@ static void __init exynos5433_cmu_peris_init(struct device_node *np) ENABLE_IP_FSYS1, }; +static const struct samsung_clk_reg_dump fsys_suspend_regs[] = { + { MUX_SEL_FSYS0, 0 }, + { MUX_SEL_FSYS1, 0 }, + { MUX_SEL_FSYS2, 0 }, + { MUX_SEL_FSYS3, 0 }, + { MUX_SEL_FSYS4, 0 }, +}; + static const struct samsung_fixed_rate_clock fsys_fixed_clks[] __initconst = { /* PHY clocks from USBDRD30_PHY */ FRATE(CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY, @@ -2296,16 +2309,11 @@ static void __init exynos5433_cmu_peris_init(struct device_node *np) .nr_clk_ids = FSYS_NR_CLK, .clk_regs = fsys_clk_regs, .nr_clk_regs = ARRAY_SIZE(fsys_clk_regs), + .suspend_regs = fsys_suspend_regs, + .nr_suspend_regs = ARRAY_SIZE(fsys_suspend_regs), + .clk_name = "aclk_fsys_200", }; -static void __init exynos5433_cmu_fsys_init(struct device_node *np) -{ - samsung_cmu_register_one(np, &fsys_cmu_info); -} - -CLK_OF_DECLARE(exynos5433_cmu_fsys, "samsung,exynos5433-cmu-fsys", - exynos5433_cmu_fsys_init); - /* * Register offset definitions for CMU_G2D */ @@ -2335,6 +2343,10 @@ static void __init exynos5433_cmu_fsys_init(struct device_node *np) DIV_ENABLE_IP_G2D_SECURE_SMMU_G2D, }; +static const struct samsung_clk_reg_dump g2d_suspend_regs[] = { + { MUX_SEL_G2D0, 0 }, +}; + /* list of all parent clock list */ PNAME(mout_aclk_g2d_266_user_p) = { "oscclk", "aclk_g2d_266", }; PNAME(mout_aclk_g2d_400_user_p) = { "oscclk", "aclk_g2d_400", }; @@ -2420,16 +2432,11 @@ static void __init exynos5433_cmu_fsys_init(struct device_node *np) .nr_clk_ids = G2D_NR_CLK, .clk_regs = g2d_clk_regs, .nr_clk_regs = ARRAY_SIZE(g2d_clk_regs), + .suspend_regs = g2d_suspend_regs, + .nr_suspend_regs = ARRAY_SIZE(g2d_suspend_regs), + .clk_name = "aclk_g2d_400", }; -static void __init exynos5433_cmu_g2d_init(struct device_node *np) -{ - samsung_cmu_register_one(np, &g2d_cmu_info); -} - -CLK_OF_DECLARE(exynos5433_cmu_g2d, "samsung,exynos5433-cmu-g2d", - exynos5433_cmu_g2d_init); - /* * Register offset definitions for CMU_DISP */ @@ -2494,6 +2501,18 @@ static void __init exynos5433_cmu_g2d_init(struct device_node *np) CLKOUT_CMU_DISP_DIV_STAT, }; +static const struct samsung_clk_reg_dump disp_suspend_regs[] = { + /* PLL has to be enabled for suspend */ + { DISP_PLL_CON0, 0x85f40502 }, + /* ignore status of external PHY muxes during suspend to avoid hangs */ + { MUX_IGNORE_DISP2, 0x00111111 }, + { MUX_SEL_DISP0, 0 }, + { MUX_SEL_DISP1, 0 }, + { MUX_SEL_DISP2, 0 }, + { MUX_SEL_DISP3, 0 }, + { MUX_SEL_DISP4, 0 }, +}; + /* list of all parent clock list */ PNAME(mout_disp_pll_p) = { "oscclk", "fout_disp_pll", }; PNAME(mout_sclk_dsim1_user_p) = { "oscclk", "sclk_dsim1_disp", }; @@ -2841,16 +2860,11 @@ static void __init exynos5433_cmu_g2d_init(struct device_node *np) .nr_clk_ids = DISP_NR_CLK, .clk_regs = disp_clk_regs, .nr_clk_regs = ARRAY_SIZE(disp_clk_regs), + .suspend_regs = disp_suspend_regs, + .nr_suspend_regs = ARRAY_SIZE(disp_suspend_regs), + .clk_name = "aclk_disp_333", }; -static void __init exynos5433_cmu_disp_init(struct device_node *np) -{ - samsung_cmu_register_one(np, &disp_cmu_info); -} - -CLK_OF_DECLARE(exynos5433_cmu_disp, "samsung,exynos5433-cmu-disp", - exynos5433_cmu_disp_init); - /* * Register offset definitions for CMU_AUD */ @@ -2885,6 +2899,11 @@ static void __init exynos5433_cmu_disp_init(struct device_node *np) ENABLE_IP_AUD1, }; +static const struct samsung_clk_reg_dump aud_suspend_regs[] = { + { MUX_SEL_AUD0, 0 }, + { MUX_SEL_AUD1, 0 }, +}; + /* list of all parent clock list */ PNAME(mout_aud_pll_user_aud_p) = { "oscclk", "fout_aud_pll", }; PNAME(mout_sclk_aud_pcm_p) = { "mout_aud_pll_user", "ioclk_audiocdclk0",}; @@ -3011,16 +3030,11 @@ static void __init exynos5433_cmu_disp_init(struct device_node *np) .nr_clk_ids = AUD_NR_CLK, .clk_regs = aud_clk_regs, .nr_clk_regs = ARRAY_SIZE(aud_clk_regs), + .suspend_regs = aud_suspend_regs, + .nr_suspend_regs = ARRAY_SIZE(aud_suspend_regs), + .clk_name = "fout_aud_pll", }; -static void __init exynos5433_cmu_aud_init(struct device_node *np) -{ - samsung_cmu_register_one(np, &aud_cmu_info); -} -CLK_OF_DECLARE(exynos5433_cmu_aud, "samsung,exynos5433-cmu-aud", - exynos5433_cmu_aud_init); - - /* * Register offset definitions for CMU_BUS{0|1|2} */ @@ -3222,6 +3236,10 @@ static void __init exynos5433_cmu_aud_init(struct device_node *np) CLK_STOPCTRL, }; +static const struct samsung_clk_reg_dump g3d_suspend_regs[] = { + { MUX_SEL_G3D, 0 }, +}; + /* list of all parent clock list */ PNAME(mout_aclk_g3d_400_p) = { "mout_g3d_pll", "aclk_g3d_400", }; PNAME(mout_g3d_pll_p) = { "oscclk", "fout_g3d_pll", }; @@ -3295,15 +3313,11 @@ static void __init exynos5433_cmu_aud_init(struct device_node *np) .nr_clk_ids = G3D_NR_CLK, .clk_regs = g3d_clk_regs, .nr_clk_regs = ARRAY_SIZE(g3d_clk_regs), + .suspend_regs = g3d_suspend_regs, + .nr_suspend_regs = ARRAY_SIZE(g3d_suspend_regs), + .clk_name = "aclk_g3d_400", }; -static void __init exynos5433_cmu_g3d_init(struct device_node *np) -{ - samsung_cmu_register_one(np, &g3d_cmu_info); -} -CLK_OF_DECLARE(exynos5433_cmu_g3d, "samsung,exynos5433-cmu-g3d", - exynos5433_cmu_g3d_init); - /* * Register offset definitions for CMU_GSCL */ @@ -3342,6 +3356,12 @@ static void __init exynos5433_cmu_g3d_init(struct device_node *np) ENABLE_IP_GSCL_SECURE_SMMU_GSCL2, }; +static const struct samsung_clk_reg_dump gscl_suspend_regs[] = { + { MUX_SEL_GSCL, 0 }, + { ENABLE_ACLK_GSCL, 0xfff }, + { ENABLE_PCLK_GSCL, 0xff }, +}; + /* list of all parent clock list */ PNAME(aclk_gscl_111_user_p) = { "oscclk", "aclk_gscl_111", }; PNAME(aclk_gscl_333_user_p) = { "oscclk", "aclk_gscl_333", }; @@ -3436,15 +3456,11 @@ static void __init exynos5433_cmu_g3d_init(struct device_node *np) .nr_clk_ids = GSCL_NR_CLK, .clk_regs = gscl_clk_regs, .nr_clk_regs = ARRAY_SIZE(gscl_clk_regs), + .suspend_regs = gscl_suspend_regs, + .nr_suspend_regs = ARRAY_SIZE(gscl_suspend_regs), + .clk_name = "aclk_gscl_111", }; -static void __init exynos5433_cmu_gscl_init(struct device_node *np) -{ - samsung_cmu_register_one(np, &gscl_cmu_info); -} -CLK_OF_DECLARE(exynos5433_cmu_gscl, "samsung,exynos5433-cmu-gscl", - exynos5433_cmu_gscl_init); - /* * Register offset definitions for CMU_APOLLO */ @@ -3970,6 +3986,11 @@ static void __init exynos5433_cmu_atlas_init(struct device_node *np) ENABLE_IP_MSCL_SECURE_SMMU_JPEG, }; +static const struct samsung_clk_reg_dump mscl_suspend_regs[] = { + { MUX_SEL_MSCL0, 0 }, + { MUX_SEL_MSCL1, 0 }, +}; + /* list of all parent clock list */ PNAME(mout_sclk_jpeg_user_p) = { "oscclk", "sclk_jpeg_mscl", }; PNAME(mout_aclk_mscl_400_user_p) = { "oscclk", "aclk_mscl_400", }; @@ -4082,15 +4103,11 @@ static void __init exynos5433_cmu_atlas_init(struct device_node *np) .nr_clk_ids = MSCL_NR_CLK, .clk_regs = mscl_clk_regs, .nr_clk_regs = ARRAY_SIZE(mscl_clk_regs), + .suspend_regs = mscl_suspend_regs, + .nr_suspend_regs = ARRAY_SIZE(mscl_suspend_regs), + .clk_name = "aclk_mscl_400", }; -static void __init exynos5433_cmu_mscl_init(struct device_node *np) -{ - samsung_cmu_register_one(np, &mscl_cmu_info); -} -CLK_OF_DECLARE(exynos5433_cmu_mscl, "samsung,exynos5433-cmu-mscl", - exynos5433_cmu_mscl_init); - /* * Register offset definitions for CMU_MFC */ @@ -4120,6 +4137,10 @@ static void __init exynos5433_cmu_mscl_init(struct device_node *np) ENABLE_IP_MFC_SECURE_SMMU_MFC, }; +static const struct samsung_clk_reg_dump mfc_suspend_regs[] = { + { MUX_SEL_MFC, 0 }, +}; + PNAME(mout_aclk_mfc_400_user_p) = { "oscclk", "aclk_mfc_400", }; static const struct samsung_mux_clock mfc_mux_clks[] __initconst = { @@ -4190,15 +4211,11 @@ static void __init exynos5433_cmu_mscl_init(struct device_node *np) .nr_clk_ids = MFC_NR_CLK, .clk_regs = mfc_clk_regs, .nr_clk_regs = ARRAY_SIZE(mfc_clk_regs), + .suspend_regs = mfc_suspend_regs, + .nr_suspend_regs = ARRAY_SIZE(mfc_suspend_regs), + .clk_name = "aclk_mfc_400", }; -static void __init exynos5433_cmu_mfc_init(struct device_node *np) -{ - samsung_cmu_register_one(np, &mfc_cmu_info); -} -CLK_OF_DECLARE(exynos5433_cmu_mfc, "samsung,exynos5433-cmu-mfc", - exynos5433_cmu_mfc_init); - /* * Register offset definitions for CMU_HEVC */ @@ -4228,6 +4245,10 @@ static void __init exynos5433_cmu_mfc_init(struct device_node *np) ENABLE_IP_HEVC_SECURE_SMMU_HEVC, }; +static const struct samsung_clk_reg_dump hevc_suspend_regs[] = { + { MUX_SEL_HEVC, 0 }, +}; + PNAME(mout_aclk_hevc_400_user_p) = { "oscclk", "aclk_hevc_400", }; static const struct samsung_mux_clock hevc_mux_clks[] __initconst = { @@ -4300,15 +4321,11 @@ static void __init exynos5433_cmu_mfc_init(struct device_node *np) .nr_clk_ids = HEVC_NR_CLK, .clk_regs = hevc_clk_regs, .nr_clk_regs = ARRAY_SIZE(hevc_clk_regs), + .suspend_regs = hevc_suspend_regs, + .nr_suspend_regs = ARRAY_SIZE(hevc_suspend_regs), + .clk_name = "aclk_hevc_400", }; -static void __init exynos5433_cmu_hevc_init(struct device_node *np) -{ - samsung_cmu_register_one(np, &hevc_cmu_info); -} -CLK_OF_DECLARE(exynos5433_cmu_hevc, "samsung,exynos5433-cmu-hevc", - exynos5433_cmu_hevc_init); - /* * Register offset definitions for CMU_ISP */ @@ -4342,6 +4359,10 @@ static void __init exynos5433_cmu_hevc_init(struct device_node *np) ENABLE_IP_ISP3, }; +static const struct samsung_clk_reg_dump isp_suspend_regs[] = { + { MUX_SEL_ISP, 0 }, +}; + PNAME(mout_aclk_isp_dis_400_user_p) = { "oscclk", "aclk_isp_dis_400", }; PNAME(mout_aclk_isp_400_user_p) = { "oscclk", "aclk_isp_400", }; @@ -4553,15 +4574,11 @@ static void __init exynos5433_cmu_hevc_init(struct device_node *np) .nr_clk_ids = ISP_NR_CLK, .clk_regs = isp_clk_regs, .nr_clk_regs = ARRAY_SIZE(isp_clk_regs), + .suspend_regs = isp_suspend_regs, + .nr_suspend_regs = ARRAY_SIZE(isp_suspend_regs), + .clk_name = "aclk_isp_400", }; -static void __init exynos5433_cmu_isp_init(struct device_node *np) -{ - samsung_cmu_register_one(np, &isp_cmu_info); -} -CLK_OF_DECLARE(exynos5433_cmu_isp, "samsung,exynos5433-cmu-isp", - exynos5433_cmu_isp_init); - /* * Register offset definitions for CMU_CAM0 */ @@ -4625,6 +4642,15 @@ static void __init exynos5433_cmu_isp_init(struct device_node *np) ENABLE_IP_CAM02, ENABLE_IP_CAM03, }; + +static const struct samsung_clk_reg_dump cam0_suspend_regs[] = { + { MUX_SEL_CAM00, 0 }, + { MUX_SEL_CAM01, 0 }, + { MUX_SEL_CAM02, 0 }, + { MUX_SEL_CAM03, 0 }, + { MUX_SEL_CAM04, 0 }, +}; + PNAME(mout_aclk_cam0_333_user_p) = { "oscclk", "aclk_cam0_333", }; PNAME(mout_aclk_cam0_400_user_p) = { "oscclk", "aclk_cam0_400", }; PNAME(mout_aclk_cam0_552_user_p) = { "oscclk", "aclk_cam0_552", }; @@ -5030,15 +5056,11 @@ static void __init exynos5433_cmu_isp_init(struct device_node *np) .nr_clk_ids = CAM0_NR_CLK, .clk_regs = cam0_clk_regs, .nr_clk_regs = ARRAY_SIZE(cam0_clk_regs), + .suspend_regs = cam0_suspend_regs, + .nr_suspend_regs = ARRAY_SIZE(cam0_suspend_regs), + .clk_name = "aclk_cam0_400", }; -static void __init exynos5433_cmu_cam0_init(struct device_node *np) -{ - samsung_cmu_register_one(np, &cam0_cmu_info); -} -CLK_OF_DECLARE(exynos5433_cmu_cam0, "samsung,exynos5433-cmu-cam0", - exynos5433_cmu_cam0_init); - /* * Register offset definitions for CMU_CAM1 */ @@ -5085,6 +5107,12 @@ static void __init exynos5433_cmu_cam0_init(struct device_node *np) ENABLE_IP_CAM12, }; +static const struct samsung_clk_reg_dump cam1_suspend_regs[] = { + { MUX_SEL_CAM10, 0 }, + { MUX_SEL_CAM11, 0 }, + { MUX_SEL_CAM12, 0 }, +}; + PNAME(mout_sclk_isp_uart_user_p) = { "oscclk", "sclk_isp_uart_cam1", }; PNAME(mout_sclk_isp_spi1_user_p) = { "oscclk", "sclk_isp_spi1_cam1", }; PNAME(mout_sclk_isp_spi0_user_p) = { "oscclk", "sclk_isp_spi0_cam1", }; @@ -5403,11 +5431,222 @@ static void __init exynos5433_cmu_cam0_init(struct device_node *np) .nr_clk_ids = CAM1_NR_CLK, .clk_regs = cam1_clk_regs, .nr_clk_regs = ARRAY_SIZE(cam1_clk_regs), + .suspend_regs = cam1_suspend_regs, + .nr_suspend_regs = ARRAY_SIZE(cam1_suspend_regs), + .clk_name = "aclk_cam1_400", +}; + + +struct exynos5433_cmu_data { + struct samsung_clk_reg_dump *clk_save; + unsigned int nr_clk_save; + const struct samsung_clk_reg_dump *clk_suspend; + unsigned int nr_clk_suspend; + + struct clk *clk; + struct clk **pclks; + int nr_pclks; + + /* must be the last entry */ + struct samsung_clk_provider ctx; +}; + +static int exynos5433_cmu_suspend(struct device *dev) +{ + struct exynos5433_cmu_data *data = dev_get_drvdata(dev); + int i; + + samsung_clk_save(data->ctx.reg_base, data->clk_save, + data->nr_clk_save); + + for (i = 0; i < data->nr_pclks; i++) + clk_prepare_enable(data->pclks[i]); + + samsung_clk_restore(data->ctx.reg_base, data->clk_suspend, + data->nr_clk_suspend); + + for (i = 0; i < data->nr_pclks; i++) + clk_disable_unprepare(data->pclks[i]); + + clk_disable_unprepare(data->clk); + + return 0; +} + +static int exynos5433_cmu_resume(struct device *dev) +{ + struct exynos5433_cmu_data *data = dev_get_drvdata(dev); + int i; + + clk_prepare_enable(data->clk); + + for (i = 0; i < data->nr_pclks; i++) + clk_prepare_enable(data->pclks[i]); + + samsung_clk_restore(data->ctx.reg_base, data->clk_save, + data->nr_clk_save); + + for (i = 0; i < data->nr_pclks; i++) + clk_disable_unprepare(data->pclks[i]); + + return 0; +} + +static int __init exynos5433_cmu_probe(struct platform_device *pdev) +{ + const struct samsung_cmu_info *info; + struct exynos5433_cmu_data *data; + struct samsung_clk_provider *ctx; + struct device *dev = &pdev->dev; + struct resource *res; + void __iomem *reg_base; + int i; + + info = of_device_get_match_data(dev); + + data = devm_kzalloc(dev, sizeof(*data) + + sizeof(*data->ctx.clk_data.hws) * info->nr_clk_ids, + GFP_KERNEL); + if (!data) + return -ENOMEM; + ctx = &data->ctx; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + reg_base = devm_ioremap_resource(dev, res); + if (IS_ERR(reg_base)) { + dev_err(dev, "failed to map registers\n"); + return PTR_ERR(reg_base); + } + + for (i = 0; i < info->nr_clk_ids; ++i) + ctx->clk_data.hws[i] = ERR_PTR(-ENOENT); + + ctx->clk_data.num = info->nr_clk_ids; + ctx->reg_base = reg_base; + ctx->dev = dev; + spin_lock_init(&ctx->lock); + + data->clk_save = samsung_clk_alloc_reg_dump(info->clk_regs, + info->nr_clk_regs); + data->nr_clk_save = info->nr_clk_regs; + data->clk_suspend = info->suspend_regs; + data->nr_clk_suspend = info->nr_suspend_regs; + data->nr_pclks = of_count_phandle_with_args(dev->of_node, "clocks", + "#clock-cells"); + if (data->nr_pclks > 0) { + data->pclks = devm_kcalloc(dev, sizeof(struct clk *), + data->nr_pclks, GFP_KERNEL); + + for (i = 0; i < data->nr_pclks; i++) { + struct clk *clk = of_clk_get(dev->of_node, i); + + if (IS_ERR(clk)) + return PTR_ERR(clk); + data->pclks[i] = clk; + } + } + + if (info->clk_name) + data->clk = clk_get(dev, info->clk_name); + clk_prepare_enable(data->clk); + + platform_set_drvdata(pdev, data); + + /* + * Enable runtime PM here to allow the clock core using runtime PM + * for the registered clocks. Additionally, we increase the runtime + * PM usage count before registering the clocks, to prevent the + * clock core from runtime suspending the device. + */ + pm_runtime_get_noresume(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + + if (info->pll_clks) + samsung_clk_register_pll(ctx, info->pll_clks, info->nr_pll_clks, + reg_base); + if (info->mux_clks) + samsung_clk_register_mux(ctx, info->mux_clks, + info->nr_mux_clks); + if (info->div_clks) + samsung_clk_register_div(ctx, info->div_clks, + info->nr_div_clks); + if (info->gate_clks) + samsung_clk_register_gate(ctx, info->gate_clks, + info->nr_gate_clks); + if (info->fixed_clks) + samsung_clk_register_fixed_rate(ctx, info->fixed_clks, + info->nr_fixed_clks); + if (info->fixed_factor_clks) + samsung_clk_register_fixed_factor(ctx, info->fixed_factor_clks, + info->nr_fixed_factor_clks); + + samsung_clk_of_add_provider(dev->of_node, ctx); + pm_runtime_put_sync(dev); + + return 0; +} + +static const struct of_device_id exynos5433_cmu_of_match[] = { + { + .compatible = "samsung,exynos5433-cmu-aud", + .data = &aud_cmu_info, + }, { + .compatible = "samsung,exynos5433-cmu-cam0", + .data = &cam0_cmu_info, + }, { + .compatible = "samsung,exynos5433-cmu-cam1", + .data = &cam1_cmu_info, + }, { + .compatible = "samsung,exynos5433-cmu-disp", + .data = &disp_cmu_info, + }, { + .compatible = "samsung,exynos5433-cmu-g2d", + .data = &g2d_cmu_info, + }, { + .compatible = "samsung,exynos5433-cmu-g3d", + .data = &g3d_cmu_info, + }, { + .compatible = "samsung,exynos5433-cmu-fsys", + .data = &fsys_cmu_info, + }, { + .compatible = "samsung,exynos5433-cmu-gscl", + .data = &gscl_cmu_info, + }, { + .compatible = "samsung,exynos5433-cmu-mfc", + .data = &mfc_cmu_info, + }, { + .compatible = "samsung,exynos5433-cmu-hevc", + .data = &hevc_cmu_info, + }, { + .compatible = "samsung,exynos5433-cmu-isp", + .data = &isp_cmu_info, + }, { + .compatible = "samsung,exynos5433-cmu-mscl", + .data = &mscl_cmu_info, + }, { + }, +}; + +static const struct dev_pm_ops exynos5433_cmu_pm_ops = { + SET_RUNTIME_PM_OPS(exynos5433_cmu_suspend, exynos5433_cmu_resume, + NULL) + SET_LATE_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) +}; + +static struct platform_driver exynos5433_cmu_driver __refdata = { + .driver = { + .name = "exynos5433-cmu", + .of_match_table = exynos5433_cmu_of_match, + .suppress_bind_attrs = true, + .pm = &exynos5433_cmu_pm_ops, + }, + .probe = exynos5433_cmu_probe, }; -static void __init exynos5433_cmu_cam1_init(struct device_node *np) +static int __init exynos5433_cmu_init(void) { - samsung_cmu_register_one(np, &cam1_cmu_info); + return platform_driver_register(&exynos5433_cmu_driver); } -CLK_OF_DECLARE(exynos5433_cmu_cam1, "samsung,exynos5433-cmu-cam1", - exynos5433_cmu_cam1_init); +core_initcall(exynos5433_cmu_init); diff --git a/drivers/clk/samsung/clk.h b/drivers/clk/samsung/clk.h index f0acae4f5d1b..d93031e94387 100644 --- a/drivers/clk/samsung/clk.h +++ b/drivers/clk/samsung/clk.h @@ -353,6 +353,12 @@ struct samsung_cmu_info { /* list and number of clocks registers */ const unsigned long *clk_regs; unsigned int nr_clk_regs; + + /* list and number of clocks registers to set before suspend */ + const struct samsung_clk_reg_dump *suspend_regs; + unsigned int nr_suspend_regs; + /* name of the parent clock needed for CMU register access */ + const char *clk_name; }; extern struct samsung_clk_provider *__init samsung_clk_init(