| Message ID | 1502297011-30201-5-git-send-email-yamada.masahiro@socionext.com |
|---|---|
| State | New |
| Headers | show |
| Series | [1/6] ARM: dts: uniphier: remove sLD3 SoC support | expand |
2017-08-10 1:43 GMT+09:00 Masahiro Yamada <yamada.masahiro@socionext.com>: > Add NAND controller node to LD4, Pro4, sLD8, Pro5, and PXs2. > Set up pinctrl to enable 2 chip select lines except Pro4. The CS1 > for Pro4 is multiplexed with other peripherals such as UART2, so > I did not enable it. > > Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> > --- With some compatibles fixed, applied to linux-uniphier. -- Best Regards Masahiro Yamada
diff --git a/arch/arm/boot/dts/uniphier-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ld4-ref.dts index 86b089e9c163..b3aaab354f3e 100644 --- a/arch/arm/boot/dts/uniphier-ld4-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld4-ref.dts @@ -64,3 +64,7 @@ &usb1 { status = "okay"; }; + +&nand { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi index 5d3924c8568c..91410609b181 100644 --- a/arch/arm/boot/dts/uniphier-ld4.dtsi +++ b/arch/arm/boot/dts/uniphier-ld4.dtsi @@ -285,6 +285,17 @@ #reset-cells = <1>; }; }; + + nand: nand@68000000 { + compatible = "socionext,uniphier-denali-nand-v5a"; + status = "disabled"; + reg-names = "nand_data", "denali_reg"; + reg = <0x68000000 0x20>, <0x68100000 0x1000>; + interrupts = <0 65 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand2cs>; + clocks = <&sys_clk 2>; + }; }; }; diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts index 6dbdc86225e9..2188d114d79b 100644 --- a/arch/arm/boot/dts/uniphier-ld6b-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts @@ -58,3 +58,7 @@ &i2c0 { status = "okay"; }; + +&nand { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts index d3be37b2ac35..903df6348e77 100644 --- a/arch/arm/boot/dts/uniphier-pro4-ref.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts @@ -66,3 +66,7 @@ &usb3 { status = "okay"; }; + +&nand { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi index 394b35e1082d..1d3d00d9c936 100644 --- a/arch/arm/boot/dts/uniphier-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-pro4.dtsi @@ -305,6 +305,17 @@ #reset-cells = <1>; }; }; + + nand: nand@68000000 { + compatible = "denali,denali-nand-uniphier-v5a"; + status = "disabled"; + reg-names = "nand_data", "denali_reg"; + reg = <0x68000000 0x20>, <0x68100000 0x1000>; + interrupts = <0 65 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + clocks = <&sys_clk 2>; + }; }; }; diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi index df0506b58330..759c2a53c29d 100644 --- a/arch/arm/boot/dts/uniphier-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-pro5.dtsi @@ -368,6 +368,17 @@ #reset-cells = <1>; }; }; + + nand: nand@68000000 { + compatible = "denali,denali-nand-uniphier-v5b"; + status = "disabled"; + reg-names = "nand_data", "denali_reg"; + reg = <0x68000000 0x20>, <0x68100000 0x1000>; + interrupts = <0 65 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand2cs>; + clocks = <&sys_clk 2>; + }; }; }; diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index c26d4ba1b9c3..ed2b9a4516aa 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -352,6 +352,17 @@ #reset-cells = <1>; }; }; + + nand: nand@68000000 { + compatible = "socionext,uniphier-denali-nand-v5b"; + status = "disabled"; + reg-names = "nand_data", "denali_reg"; + reg = <0x68000000 0x20>, <0x68100000 0x1000>; + interrupts = <0 65 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand2cs>; + clocks = <&sys_clk 2>; + }; }; }; diff --git a/arch/arm/boot/dts/uniphier-sld8-ref.dts b/arch/arm/boot/dts/uniphier-sld8-ref.dts index 394f5df62eda..5accd3cc76e4 100644 --- a/arch/arm/boot/dts/uniphier-sld8-ref.dts +++ b/arch/arm/boot/dts/uniphier-sld8-ref.dts @@ -68,3 +68,7 @@ &usb2 { status = "okay"; }; + +&nand { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi index 0c022fa5640c..756fed778de6 100644 --- a/arch/arm/boot/dts/uniphier-sld8.dtsi +++ b/arch/arm/boot/dts/uniphier-sld8.dtsi @@ -285,6 +285,17 @@ #reset-cells = <1>; }; }; + + nand: nand@68000000 { + compatible = "denali,denali-nand-uniphier-v5a"; + status = "disabled"; + reg-names = "nand_data", "denali_reg"; + reg = <0x68000000 0x20>, <0x68100000 0x1000>; + interrupts = <0 65 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand2cs>; + clocks = <&sys_clk 2>; + }; }; };
Add NAND controller node to LD4, Pro4, sLD8, Pro5, and PXs2. Set up pinctrl to enable 2 chip select lines except Pro4. The CS1 for Pro4 is multiplexed with other peripherals such as UART2, so I did not enable it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> --- arch/arm/boot/dts/uniphier-ld4-ref.dts | 4 ++++ arch/arm/boot/dts/uniphier-ld4.dtsi | 11 +++++++++++ arch/arm/boot/dts/uniphier-ld6b-ref.dts | 4 ++++ arch/arm/boot/dts/uniphier-pro4-ref.dts | 4 ++++ arch/arm/boot/dts/uniphier-pro4.dtsi | 11 +++++++++++ arch/arm/boot/dts/uniphier-pro5.dtsi | 11 +++++++++++ arch/arm/boot/dts/uniphier-pxs2.dtsi | 11 +++++++++++ arch/arm/boot/dts/uniphier-sld8-ref.dts | 4 ++++ arch/arm/boot/dts/uniphier-sld8.dtsi | 11 +++++++++++ 9 files changed, 71 insertions(+) -- 2.7.4