| Message ID | 20140205122258.GA13821@S2101-09.ap.freescale.net |
|---|---|
| State | New |
| Headers | show |
On Thu, Feb 06, 2014 at 02:45:05PM +0100, Arnd Bergmann wrote: > On Wednesday 05 February 2014, Shawn Guo wrote: > > Hi arm-soc folks, > > > > This is basically imx-dt-3.14 pull request that missed the 3.14 merge > > window with the pingrp removal series applied on top of. It also > > includes a few additional board support I collected since imx-dt-3.14. > > There will be another round of IMX DT changes for 3.15 later, but this > > one should be the majority. Please pull, thanks. > > Hi Shawn, > > no objections to the stuff you add here, but the way it's organized > is not good. Instead of adding the controversial patches first and > then reverting them, please redo the series so you don't actually > have the patches in the history. I see that you have rebased the > patches on 3.14-rc1 already so there really shouldn't be any cross- > tree dependencies that make it necessary to keep them in. I haven't checked the patches one by one in the pull request, but it probably means that I will have to redo most of the patches, because every single new board dts and addition of device for existing board have new pinctrl data along with them. I will look at the work/effort closer tomorrow. > > Also, because of the pure size of the pull request: > > 105 files changed, 14073 insertions(+), 3127 deletions(-) > > it would be nice to split it up into smaller units. A good > separation would be to have new board support in one pull > request and the changes to existing boards in another one. Ok, I will try. Shawn
On Thu, Feb 06, 2014 at 02:45:05PM +0100, Arnd Bergmann wrote: > On Wednesday 05 February 2014, Shawn Guo wrote: > > Hi arm-soc folks, > > > > This is basically imx-dt-3.14 pull request that missed the 3.14 merge > > window with the pingrp removal series applied on top of. It also > > includes a few additional board support I collected since imx-dt-3.14. > > There will be another round of IMX DT changes for 3.15 later, but this > > one should be the majority. Please pull, thanks. > > Hi Shawn, > > no objections to the stuff you add here, but the way it's organized > is not good. Instead of adding the controversial patches first and > then reverting them, please redo the series so you don't actually > have the patches in the history. I see that you have rebased the > patches on 3.14-rc1 already so there really shouldn't be any cross- > tree dependencies that make it necessary to keep them in. Okay. I just spent the weekend to rebuild the branch and reworked quite a lot of patches to wipe the pingrp stuff from the history. > > Also, because of the pure size of the pull request: > > 105 files changed, 14073 insertions(+), 3127 deletions(-) > > it would be nice to split it up into smaller units. A good > separation would be to have new board support in one pull > request and the changes to existing boards in another one. Some new board support are built on top of the updates to the existing files for purpose like sharing common part. And some updates are added on top of new board support along time goes. So it's hard to make such separation. Considering the amount of imx6 changes these days, I chose to split the branch into two, one for imx6 changes and the other for all the rest. Such separation does not involve too much interdependency. I will send them as the updated pull request shortly. Shawn
On Fri, Feb 07, 2014 at 11:04:30AM +0100, Heiko Stübner wrote: > Hi Shawn, > > Am Mittwoch, 5. Februar 2014, 20:23:01 schrieb Shawn Guo: > > - Make pinctrl nodes board specific to avoid floating board specific > > device tree blob with so many unused pinctrl data. > > can you take a look at "dtc: add ability to make nodes conditional on them > being referenced" [0] to see if it can help to solve the floating pinctrl > problem more generic in the future? Yes, if it gets accepted, we will consider to use it in the future projects. Shawn > [0] http://www.spinics.net/lists/arm-kernel/msg303967.html >
Hi arm-soc folks, This is basically imx-dt-3.14 pull request that missed the 3.14 merge window with the pingrp removal series applied on top of. It also includes a few additional board support I collected since imx-dt-3.14. There will be another round of IMX DT changes for 3.15 later, but this one should be the majority. Please pull, thanks. Shawn The following changes since commit 38dbfb59d1175ef458d006556061adeaa8751b72: Linus 3.14-rc1 (2014-02-02 16:42:13 -0800) are available in the git repository at: git://git.linaro.org/people/shawnguo/linux-2.6.git tags/imx-dt-3.15 for you to fetch changes up to 6e63728deb5340f6a4988d98ff86227abf62c81d: ARM: dts: imx28-m28cu3: Remove 'reset-active-high' (2014-02-03 22:57:45 +0800) ---------------------------------------------------------------- i.MX device tree changes for 3.15: - New SoC device tree support for imx35 and imx50. - A good number of new i.MX6 boards support: SolidRun HummingBoard, cm-fx6, dmo-edmqmx6, nitrogen6x, Gateworks Ventana gw5xxx family, DFI FS700-M60 and Zealz GK802. - A few other new i.MX boards support: imx25-eukrea, imx28-duckbill, imx28-eukrea, Eukrea cpuimx35, imx50-evk, imx51-eukrea, imx53-voipac, MCIMX53-START-R and Ka-Ro TX53. - Add pinfunc headers for imx25, imx27 and imx50. - Make pinctrl nodes board specific to avoid floating board specific device tree blob with so many unused pinctrl data. - Use clock defines in imx5 DTS files. - Update imx6q-sabrelite device tree and add Dual Lite/Solo support. - Use GPIO_6 for FEC interrupt to workaround a hardware bug (ERR006687 ENET: Only the ENET wake-up interrupt request can wake the system from Wait mode.) - A plenty of random updates on various SoC and board device tree sources, adding pinctrl settings, device nodes, properties, etc. ---------------------------------------------------------------- Aida Mynzhasova (1): ARM: dts: mxs: add auart2 pinmux to imx28.dtsi Alexander Shiyan (26): ARM: dts: i.MX51: Update CPU node ARM: dts: i.MX51: Add dummy clock to AUDMUX ARM: dts: i.MX51: Switch to use standard IRQ flags definitions ARM: dts: i.MX51: Move usbphy0 node from AIPS1 ARM: dts: i.MX51 boards: Switch to use standard GPIO flags definitions ARM: dts: imx51-babbage: Fix chipselect level for dataflash on spi0.1 ARM: dts: imx51-babbage: Define FEC reset pin ARM: dts: imx27-phytec-phycore-som: Add on-flash BBT support ARM: dts: imx27-phytec-phycore-rdk: Add DT node for camera module ARM: dts: imx27-phytec-phycore-som: Update FEC node ARM: dts: i.MX27 boards: Switch to use standard GPIO and IRQ flags definitions ARM: dts: i.MX27: Configure GPIOs as "input" by default ARM: dts: i.MX: Move include "imxXX-pinfunc.h" into "imxXX-pingrp.h" ARM: dts: imx27-phytec-phycore-rdk: Change pinctrl settings for I2C1 ARM: dts: imx27-phytec-phycore-som: trivial: Typo fix ARM: dts: imx27-phytec-phycore-som: Add pinctrl for CSPI1 and GPIOs used on module ARM: dts: imx27-phytec-phycore-som: Rename file to .dtsi ARM: dts: imx27-phytec-phycore-som: Add NFC pin group ARM: dts: imx27-phytec-phycore-rdk: Enable 1-Wire module ARM: dts: imx27-phytec-phycore-som: Add spi-cs-high property to PMIC ARM: dts: i.MX27: Add missing pullup settings for SDHC pin groups ARM: dts: imx27-phytec-phycore-rdk: Add pingrp for SDHC ARM: dts: imx27-phytec-phycore-rdk: Add pinctrl definitions for WEIM ARM: dts: i.MX27: Add SSI nodes ARM: dts: imx53-evk: Remove board support ARM: dts: i.MX51: Switch to use standard definitions for input subsystem Alexandre Belloni (3): ARM: dts: mxs: add #io-channel-cells to mx28 lradc ARM: dts: mxs: Add iio-hwmon to mx28 soc ARM: dts: mxs: Add iio-hwmon to mx23 soc Anson Huang (7): ARM: dts: imx6q: update setting of VDDARM_CAP voltage ARM: dts: imx6q: add vddsoc/pu setpoint info ARM: dts: imx6dl: enable cpufreq support ARM: dts: imx6qdl: add necessary thermal clk ARM: dts: imx6qdl-sabresd: Add power key support ARM: dts: imx6sl: add ocram device support ARM: dts: imx6sl: add keypad support for i.mx6sl-evk board. Denis Carikli (15): of: add vendor prefix for Eukrea Electromatique. ARM: dts: i.MX25: Add ssi clocks and DMA events. ARM: dts: i.MX25: Add sdma script path. ARM: dts: imx25.dtsi: Add a label for the Audio Multiplexer. ARM: dts: imx51.dtsi: Add some pinmux pins. ARM: dts: Add support for the cpuimx51 board from Eukrea and its baseboard. ARM: dts: imx25: Add pinctrl functions and groups. ARM: dts: imx25.dtsi: label the iomuxc. ARM: dts: mxs: Add 18bit pin config for lcdif. ARM: dts: mxs: Add a new pin config for the usb0 ID. ARM: dts: Add support for the cpuimx25 board from Eukrea and its baseboard. ARM: dts: mbimxsd25: Add sound support. ARM: dts: mbimxsd51: Add sound support. ARM: dts: imx53: Add gpio and input dt includes. ARM: dts: Add support for the cpuimx35 board from Eukrea and its baseboard. Eric Bénard (1): ARM: mxs: Add support for the eukrea-cpuimx28. Fabio Estevam (8): ARM: dts: imx6q-udoo: Add Ethernet support ARM: dts: imx6q-sabrelite: Remove duplicate GPIO entry ARM: dts: imx6q-sabrelite: Place 'status' as the last node ARM: dts: imx28-evk: Run I2C0 at 400kHz ARM: dts: imx6: Use 'vddarm' as the regulator name ARM: dts: imx6qdl-sabresd: Add PFUZE100 support ARM: dts: imx6qdl-sabreauto: Add LVDS support ARM: dts: imx28-m28cu3: Remove 'reset-active-high' Frank Li (1): ARM: dts: imxqdl: enable dma for spi Greg Ungerer (3): ARM: dts: imx: add device tree pin definitions for the IMX50 ARM: dts: imx: add IMX50 SoC device tree ARM: dts: imx: add device tree support for Freescale imx50evk board Gwenhael Goavec-Merou (10): ARM: imx27-apf27dev: Add sdhci support ARM: dts: imx27-apf27dev: fix display size ARM: imx27: add pingroups for cspi, sdhc and framebuffer ARM: dts: imx27: imx27-apf27: add pinctrl for fec and uart1 ARM: dts: imx27: imx27-apf27dev: add pinctrl for cspi, i2c, sdhc and framebuffer ARM: dts: apf28dev: set gpio polarity for usb regulator and pinctrl for regulator gpio ARM: imx28: add apf28 specific initialization (macaddr) ARM: imx27: add pwm pingrp ARM: dts: apf27dev: Add pwm support ARM: dts: imx27-apf27dev: Add pinctrl for cspi, sdhci, leds and keys Huang Shijie (1): ARM: dts: vf610: use the interrupt macros John Tobias (1): ARM: dts: imx6sl: Adding cpu frequency and VDDSOC/PU table. Lothar Waßmann (4): ARM: dts: imx6qdl: add aliases for can interfaces ARM: dts: imx6qdl: add pingroup for enet interface in RMII mode ARM: dts: imx6qdl: add new pingroup for audmux ARM: dts: imx53: add support for Ka-Ro TX53 modules Lucas Stach (3): ARM: imx53: use clock defines in DTS files ARM: imx51: use clock defines in DTS files ARM: imx50: use clock defines in DTS files Marek Vasut (6): ARM: dts: imx53: Fix display pinmux for M53EVK ARM: dts: imx53: Fix backlight for M53EVK ARM: dts: imx53: Add USB support for M53EVK ARM: dts: imx53: Add AHCI SATA DT node ARM: dts: imx53: Enable AHCI SATA for M53EVK ARM: dts: imx6q-sabrelite: Enable PCI express Markus Pargmann (7): ARM: dts: imx27 pin functions ARM: dts: imx27 pingroups ARM: dts: imx27 iomux device node ARM: dts: imx27 phyCARD-S pinctrl ARM: dts: imx27 phycore move uart1 to rdk ARM: dts: imx27 phycore pinctrl ARM: DTS: imx5* imx6*, use imx51-ssi Maxime Ripard (2): ARM: mxs: cfa10049: Add NAU7802 ADCs to the device tree ARM: dts: cfa10036: Add dr_mode and phy_type properties to the DT Michael Grzeschik (1): ARM: i.MX28: dts: rename usbphy pin names Michael Heimpold (1): ARM: mxs: add support for I2SE's duckbill series Nicolin Chen (2): ARM: dts: imx: specify the value of audmux pinctrl instead of 0x80000000 ARM: dts: imx6qdl: add spdif support for sabreauto Peter Chen (3): ARM: dts: imx6q-arm2: enable USB OTG ARM: dts: imx6: add anatop phandle for usbphy ARM: dts: imx: add mxs phy controller id Philipp Zabel (2): ARM: dts: imx6q-sabrelite: PHY reset is active-low ARM: dts: imx6: edmqmx6: add PF0100 PMIC to device tree Robert Nelson (1): ARM: dts: imx53: Enable AHCI SATA for imx53-qsb Rostislav Lisovy (8): ARM: dts: i.MX53: Add alternate pinmux option for i2c_3 ARM: dts: i.MX53: Internal keyboard controller ARM: dts: Add vendor prefix for Voipac Technologies s.r.o. ARM: dts: i.MX53: dts for Voipac x53-dmm-668 module ARM: dts: i.MX53: Devicetree for Voipac Baseboard using x53-dmm-668 module ARM: dts: voipac: Improve fixed voltage regulator definition ARM: i.MX53: dts: NAND flash controller ARM: i.MX53: dts: USB host controller Sascha Hauer (9): ARM: dts: imx53: Add mmc aliases ARM: dts: imx6q: Add spi4 alias ARM: dts: imx6qdl: Add mmc aliases ARM: dts: imx51: Add mmc aliases ARM: dts: imx6: Add DFI FS700-M60 board support ARM: dts: imx6: edmqmx6: Add usdhc4 (emmc) support ARM: dts: imx6: edmqmx6: Add sata support ARM: dts: imx6: edmqmx6: Add LED support ARM: dts: imx6q: Add support for Zealz GK802 Shawn Guo (17): ARM: dts: imx6qdl: make pinctrl nodes board specific ARM: dts: imx6sl: make pinctrl nodes board specific ARM: dts: imx53: make pinctrl nodes board specific ARM: dts: imx51: make pinctrl nodes board specific ARM: dts: imx50: make pinctrl nodes board specific ARM: dts: imx53-mba53: create a container for fixed regulators ARM: dts: imx: use generic node name for fixed regulator ARM: dts: vf610: make pinctrl nodes board specific ARM: dts: imx6qdl: remove the use of pingrp macros ARM: dts: imx6sl: remove the use of pingrp macros ARM: dts: imx53: remove the use of pingrp macros ARM: dts: imx51: remove the use of pingrp macros ARM: dts: imx50: remove the use of pingrp macros ARM: dts: imx35: remove the use of pingrp macros ARM: dts: imx25: remove the use of pingrp macros ARM: dts: imx27: remove the use of pingrp macros ARM: dts: vf610: remove the use of pingrp macros Silvio F (2): DT: Add Data Modul vendor prefix ARM: dts: imx6: Add support for imx6q dmo edmqmx6 Steffen Trumtrar (3): ARM: dts: Add support for the i.MX35. ARM: i.MX53: dts: move common QSB nodes to new file ARM: i.MX53: dts: add support for MCIMX53-START-R Sébastien Szymanski (1): ARM: dts: imx28-apf28dev: add user button Tim Harvey (3): ARM: dts: disable flexcan by default ARM: dts: added several new imx-pinmux groups ARM: dts: add Gateworks Ventana support Troy Kisky (30): ARM: dts: imx: pinfunc: add MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT ARM: dts: imx: imx6qdl.dtsi: add mipi_csi tag ARM: dts: imx: imx6q.dtsi: use IRQ_TYPE_LEVEL_HIGH ARM: dts: imx: imx6dl.dtsi: use IRQ_TYPE_LEVEL_HIGH ARM: dts: imx: imx6sl.dtsi: use IRQ_TYPE_LEVEL_HIGH ARM: dts: imx: imx6qdl.dtsi: use IRQ_TYPE_LEVEL_HIGH ARM: dts: imx: imx6sl/qdl-pingrp: reorganize USDHCx pad groups ARM: dts: imx: sabrelite: add Dual Lite/Solo support ARM: dts: imx6qdl-sabrelite: Add uart1 support ARM: dts: imx6qdl-sabrelite: remove usdhc4 wp-gpio ARM: dts: imx6qdl-sabrelite: move pcie to imx6qdl-sabrelite.dtsi ARM: dts: imx6qdl-sabrelite: move USDHC4 CD to pinctrl_usdhc4 ARM: dts: imx6qdl-sabrelite: move USDHC3 CD/WP to pinctrl_usdhc3 ARM: dts: imx6qdl-sabrelite: move spi-nor CS to pinctrl_ecspi1 ARM: dts: imx6qdl-sabrelite: move usbotg power enable to pinctrl_usbotg ARM: dts: imx6qdl-sabrelite: move phy reset to pinctrl_enet ARM: dts: imx6qdl-sabrelite: explicitly set pad for SGTL5000 sys_mclk ARM: dts: imx6qdl-sabrelite: add pwms for backlights ARM: dts: imx6qdl-sabrelite: add skews for Micrel phy ARM: dts: imx6qdl-sabrelite: fix ENET group ARM: dts: imx6qdl-sabrelite: Add over-current pin to usbotg ARM: dts: imx: add nitrogen6x board ARM: dts: imx6qdl-sabrelite: add gpio-keys ARM: dts: imx: pinfunc: add MX6QDL_PAD_GPIO_6__ENET_IRQ ARM: dts: imx6qdl: add pingroups for enet with GPIO6 interrupt ARM: dts: imx6qdl-sabrelite: use MX6QDL_ENET_PINGRP_RGMII_MD ARM: dts: imx6qdl: use interrupts-extended for fec ARM: dts: imx6qdl-sabrelite: use GPIO_6 for FEC interrupt. ARM: dts: imx6qdl-sabreauto: use GPIO_6 for FEC interrupt. ARM: dts: imx6q-arm2: use GPIO_6 for FEC interrupt. Valentin Raevsky (1): ARM: dts: Add initial support for cm-fx6. .../devicetree/bindings/vendor-prefixes.txt | 3 + arch/arm/boot/dts/Makefile | 30 +- arch/arm/boot/dts/imx23-evk.dts | 8 +- arch/arm/boot/dts/imx23-olinuxino.dts | 5 +- arch/arm/boot/dts/imx23-stmp378x_devb.dts | 5 +- arch/arm/boot/dts/imx23.dtsi | 8 +- arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi | 73 ++ .../boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts | 174 ++++ arch/arm/boot/dts/imx25-pinfunc.h | 494 +++++++++++ arch/arm/boot/dts/imx25.dtsi | 18 +- arch/arm/boot/dts/imx27-apf27.dts | 38 + arch/arm/boot/dts/imx27-apf27dev.dts | 149 +++- arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts | 61 +- arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts | 42 +- arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts | 97 +- ...ycore-som.dts => imx27-phytec-phycore-som.dtsi} | 95 +- arch/arm/boot/dts/imx27-pinfunc.h | 526 +++++++++++ arch/arm/boot/dts/imx27.dtsi | 151 ++-- arch/arm/boot/dts/imx28-apf28dev.dts | 29 +- arch/arm/boot/dts/imx28-apx4devkit.dts | 5 +- arch/arm/boot/dts/imx28-cfa10036.dts | 2 + arch/arm/boot/dts/imx28-cfa10037.dts | 7 +- arch/arm/boot/dts/imx28-cfa10049.dts | 31 +- arch/arm/boot/dts/imx28-cfa10057.dts | 7 +- arch/arm/boot/dts/imx28-cfa10058.dts | 7 +- arch/arm/boot/dts/imx28-duckbill.dts | 121 +++ arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts | 71 ++ arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts | 50 ++ arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi | 326 +++++++ arch/arm/boot/dts/imx28-evk.dts | 24 +- arch/arm/boot/dts/imx28-m28cu3.dts | 17 +- arch/arm/boot/dts/imx28-m28evk.dts | 18 +- arch/arm/boot/dts/imx28-sps1.dts | 7 +- arch/arm/boot/dts/imx28-tx28.dts | 23 +- arch/arm/boot/dts/imx28.dtsi | 65 +- arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi | 81 ++ .../boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts | 143 +++ arch/arm/boot/dts/imx35.dtsi | 359 ++++++++ arch/arm/boot/dts/imx50-evk.dts | 119 +++ arch/arm/boot/dts/imx50-pinfunc.h | 923 +++++++++++++++++++ arch/arm/boot/dts/imx50.dtsi | 478 ++++++++++ arch/arm/boot/dts/imx51-apf51.dts | 40 +- arch/arm/boot/dts/imx51-apf51dev.dts | 102 ++- arch/arm/boot/dts/imx51-babbage.dts | 248 +++++- arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi | 93 ++ .../boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts | 174 ++++ arch/arm/boot/dts/imx51.dtsi | 459 ++-------- arch/arm/boot/dts/imx53-ard.dts | 33 +- arch/arm/boot/dts/imx53-evk.dts | 126 --- arch/arm/boot/dts/imx53-m53evk.dts | 233 ++++- arch/arm/boot/dts/imx53-mba53.dts | 40 +- arch/arm/boot/dts/imx53-qsb-common.dtsi | 336 +++++++ arch/arm/boot/dts/imx53-qsb.dts | 210 +---- arch/arm/boot/dts/imx53-qsrb.dts | 158 ++++ arch/arm/boot/dts/imx53-smd.dts | 119 ++- arch/arm/boot/dts/imx53-tqma53.dtsi | 175 +++- arch/arm/boot/dts/imx53-tx53-x03x.dts | 315 +++++++ arch/arm/boot/dts/imx53-tx53-x13x.dts | 243 +++++ arch/arm/boot/dts/imx53-tx53.dtsi | 511 ++++++++++- arch/arm/boot/dts/imx53-voipac-bsb.dts | 159 ++++ arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi | 277 ++++++ arch/arm/boot/dts/imx53.dtsi | 663 +++----------- arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts | 23 + arch/arm/boot/dts/imx6dl-gw51xx.dts | 19 + arch/arm/boot/dts/imx6dl-gw52xx.dts | 19 + arch/arm/boot/dts/imx6dl-gw53xx.dts | 19 + arch/arm/boot/dts/imx6dl-gw54xx.dts | 19 + arch/arm/boot/dts/imx6dl-nitrogen6x.dts | 21 + arch/arm/boot/dts/imx6dl-pinfunc.h | 2 + arch/arm/boot/dts/imx6dl-sabrelite.dts | 20 + arch/arm/boot/dts/imx6dl.dtsi | 29 +- arch/arm/boot/dts/imx6q-arm2.dts | 140 ++- arch/arm/boot/dts/imx6q-cm-fx6.dts | 107 +++ arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts | 23 + arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 372 ++++++++ arch/arm/boot/dts/imx6q-gk802.dts | 171 ++++ arch/arm/boot/dts/imx6q-gw51xx.dts | 19 + arch/arm/boot/dts/imx6q-gw52xx.dts | 23 + arch/arm/boot/dts/imx6q-gw53xx.dts | 23 + arch/arm/boot/dts/imx6q-gw5400-a.dts | 546 ++++++++++++ arch/arm/boot/dts/imx6q-gw54xx.dts | 23 + arch/arm/boot/dts/imx6q-nitrogen6x.dts | 25 + arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi | 85 +- arch/arm/boot/dts/imx6q-pinfunc.h | 2 + arch/arm/boot/dts/imx6q-sabrelite.dts | 178 +--- arch/arm/boot/dts/imx6q-sbc6x.dts | 58 +- arch/arm/boot/dts/imx6q-udoo.dts | 54 +- arch/arm/boot/dts/imx6q.dtsi | 21 +- arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi | 199 +++++ arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 374 ++++++++ arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 490 ++++++++++ arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 553 ++++++++++++ arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 580 ++++++++++++ arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 422 +++++++++ arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 246 ++++- arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 423 +++++++++ arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 272 +++++- arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 128 ++- arch/arm/boot/dts/imx6qdl.dtsi | 938 +++----------------- arch/arm/boot/dts/imx6sl-evk.dts | 210 ++++- arch/arm/boot/dts/imx6sl.dtsi | 385 +++----- arch/arm/boot/dts/vf610-cosmic.dts | 29 +- arch/arm/boot/dts/vf610-twr.dts | 66 +- arch/arm/boot/dts/vf610.dtsi | 207 +---- arch/arm/mach-mxs/mach-mxs.c | 33 + 105 files changed, 14073 insertions(+), 3127 deletions(-) create mode 100644 arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi create mode 100644 arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts create mode 100644 arch/arm/boot/dts/imx25-pinfunc.h rename arch/arm/boot/dts/{imx27-phytec-phycore-som.dts => imx27-phytec-phycore-som.dtsi} (61%) create mode 100644 arch/arm/boot/dts/imx27-pinfunc.h create mode 100644 arch/arm/boot/dts/imx28-duckbill.dts create mode 100644 arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts create mode 100644 arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts create mode 100644 arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi create mode 100644 arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi create mode 100644 arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts create mode 100644 arch/arm/boot/dts/imx35.dtsi create mode 100644 arch/arm/boot/dts/imx50-evk.dts create mode 100644 arch/arm/boot/dts/imx50-pinfunc.h create mode 100644 arch/arm/boot/dts/imx50.dtsi create mode 100644 arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi create mode 100644 arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts delete mode 100644 arch/arm/boot/dts/imx53-evk.dts create mode 100644 arch/arm/boot/dts/imx53-qsb-common.dtsi create mode 100644 arch/arm/boot/dts/imx53-qsrb.dts create mode 100644 arch/arm/boot/dts/imx53-tx53-x03x.dts create mode 100644 arch/arm/boot/dts/imx53-tx53-x13x.dts create mode 100644 arch/arm/boot/dts/imx53-voipac-bsb.dts create mode 100644 arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi create mode 100644 arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts create mode 100644 arch/arm/boot/dts/imx6dl-gw51xx.dts create mode 100644 arch/arm/boot/dts/imx6dl-gw52xx.dts create mode 100644 arch/arm/boot/dts/imx6dl-gw53xx.dts create mode 100644 arch/arm/boot/dts/imx6dl-gw54xx.dts create mode 100644 arch/arm/boot/dts/imx6dl-nitrogen6x.dts create mode 100644 arch/arm/boot/dts/imx6dl-sabrelite.dts create mode 100644 arch/arm/boot/dts/imx6q-cm-fx6.dts create mode 100644 arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts create mode 100644 arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts create mode 100644 arch/arm/boot/dts/imx6q-gk802.dts create mode 100644 arch/arm/boot/dts/imx6q-gw51xx.dts create mode 100644 arch/arm/boot/dts/imx6q-gw52xx.dts create mode 100644 arch/arm/boot/dts/imx6q-gw53xx.dts create mode 100644 arch/arm/boot/dts/imx6q-gw5400-a.dts create mode 100644 arch/arm/boot/dts/imx6q-gw54xx.dts create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6x.dts create mode 100644 arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi create mode 100644 arch/arm/boot/dts/imx6qdl-gw51xx.dtsi create mode 100644 arch/arm/boot/dts/imx6qdl-gw52xx.dtsi create mode 100644 arch/arm/boot/dts/imx6qdl-gw53xx.dtsi create mode 100644 arch/arm/boot/dts/imx6qdl-gw54xx.dtsi create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi create mode 100644 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi