| Message ID | 20171110142127.12018-31-ard.biesheuvel@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | add support for Socionext SynQuacer | expand |
On Fri, Nov 10, 2017 at 02:21:23PM +0000, Ard Biesheuvel wrote: > Add a RealTimeClockLib implementation for the NXP PCF8563 as used on > the Socionext Developer Box board. Note that the standard I2C protocol > stack does not support runtime use, so this driver invokes the I2C master > protocol directly. This requires support from the platform side as well, > and so this driver will only attach to a I2C master that has the > gPcf8563RealTimeClockLibI2cMasterProtolGuid protocol installed on its > handle. It is up to the platform to ensure that the driver producing > the I2C master protocol in question is runtime capable, and is not > shared with the I2C protocol stack (i.e., it should not have the I2C > Bus Configuration Management protocol installed as well). Any chance you can flip the order of this and the subsequent one if this one explicitly won't bind unless... > Contributed-under: TianoCore Contribution Agreement 1.1 > Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> > --- > Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.c | 402 ++++++++++++++++++++ > Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.dec | 29 ++ > Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.inf | 52 +++ > 3 files changed, 483 insertions(+) > > diff --git a/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.c b/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.c > new file mode 100644 > index 000000000000..67f8e7de4025 > --- /dev/null > +++ b/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.c > @@ -0,0 +1,402 @@ > +/** @file > + > + Copyright (c) 2017, Linaro, Ltd. All rights reserved.<BR> > + > + This program and the accompanying materials > + are licensed and made available under the terms and conditions of the BSD License > + which accompanies this distribution. The full text of the license may be found at > + http://opensource.org/licenses/bsd-license.php > + > + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > + > +**/ > + > +#include <PiDxe.h> > +#include <Library/DebugLib.h> > +#include <Library/IoLib.h> > +#include <Library/RealTimeClockLib.h> > +#include <Library/UefiBootServicesTableLib.h> > +#include <Library/UefiLib.h> > +#include <Library/UefiRuntimeLib.h> > +#include <Protocol/I2cMaster.h> > + > +#define SLAVE_ADDRESS (FixedPcdGet8 (PcdI2cSlaveAddress)) > +#define PCF8563_DATA_REG_OFFSET 0x2 > + > +#define PCF8563_SECONDS_MASK 0x7f > +#define PCF8563_MINUTES_MASK 0x7f > +#define PCF8563_HOURS_MASK 0x3f > +#define PCF8563_DAYS_MASK 0x3f > +#define PCF8563_WEEKDAYS_MASK 0x07 > +#define PCF8563_MONTHS_MASK 0x1f > +#define PCF8563_CENTURY_MASK 0x80 > + > +// > +// The PCF8563 has a 'century' flag, which means it could theoretically span > +// 200 years. However, it treats all years divisible by 4 as leap years, > +// including the years 1900 and 2100 (which are not leap years), so the only > +// sane base year is 2000 (which was a leap year). > +// > +#define EPOCH_BASE 2000 > + > +STATIC EFI_HANDLE mI2cMasterHandle; > +STATIC VOID *mDriverEventRegistration; > +STATIC EFI_I2C_MASTER_PROTOCOL *mI2cMaster; > +STATIC EFI_EVENT mRtcVirtualAddrChangeEvent; > + > +#pragma pack(1) > +typedef struct { > + UINT8 VL_seconds; > + UINT8 Minutes; > + UINT8 Hours; > + UINT8 Days; > + UINT8 Weekdays; > + UINT8 Century_months; > + UINT8 Years; > +} RTC_DATETIME; > + > +typedef struct { > + UINT8 Reg; > + RTC_DATETIME DateTime; > +} RTC_SET_DATETIME_PACKET; > +#pragma pack() > + > +typedef struct { > + UINTN OperationCount; > + EFI_I2C_OPERATION SetAddressOp; > + EFI_I2C_OPERATION GetDateTimeOp; > +} RTC_GET_I2C_REQUEST; > + > +typedef EFI_I2C_REQUEST_PACKET RTC_SET_I2C_REQUEST; > +/** > + Returns the current time and date information, and the time-keeping > + capabilities of the hardware platform. > + > + @param Time A pointer to storage to receive a snapshot of > + the current time. > + @param Capabilities An optional pointer to a buffer to receive the > + real time clock device's capabilities. > + > + @retval EFI_SUCCESS The operation completed successfully. > + @retval EFI_INVALID_PARAMETER Time is NULL. > + @retval EFI_DEVICE_ERROR The time could not be retrieved due to hardware > + error. > + > +**/ > +EFI_STATUS > +EFIAPI > +LibGetTime ( > + OUT EFI_TIME *Time, > + OUT EFI_TIME_CAPABILITIES *Capabilities > + ) > +{ > + RTC_GET_I2C_REQUEST Op; > + RTC_DATETIME DateTime; > + EFI_STATUS Status; > + UINT8 Reg; > + > + if (Time == NULL) { > + return EFI_INVALID_PARAMETER; > + } > + > + if (mI2cMaster == NULL) { > + return EFI_DEVICE_ERROR; > + } > + > + Reg = PCF8563_DATA_REG_OFFSET; > + > + Op.OperationCount = 2; > + > + Op.SetAddressOp.Flags = 0; > + Op.SetAddressOp.LengthInBytes = 1; > + Op.SetAddressOp.Buffer = &Reg; > + > + Op.GetDateTimeOp.Flags = I2C_FLAG_READ; > + Op.GetDateTimeOp.LengthInBytes = sizeof (RTC_DATETIME); > + Op.GetDateTimeOp.Buffer = (VOID *)&DateTime; > + > + Status = mI2cMaster->StartRequest (mI2cMaster, SLAVE_ADDRESS, > + (VOID *)&Op, NULL, NULL); > + if (EFI_ERROR (Status)) { > + return EFI_DEVICE_ERROR; > + } > + > + Time->Second = BcdToDecimal8 (DateTime.VL_seconds & PCF8563_SECONDS_MASK); > + Time->Minute = BcdToDecimal8 (DateTime.Minutes & PCF8563_MINUTES_MASK); > + Time->Hour = BcdToDecimal8 (DateTime.Hours & PCF8563_HOURS_MASK); > + Time->Day = BcdToDecimal8 (DateTime.Days & PCF8563_DAYS_MASK); > + Time->Month = BcdToDecimal8 (DateTime.Century_months & PCF8563_MONTHS_MASK); > + Time->Year = BcdToDecimal8 (DateTime.Years) + EPOCH_BASE; > + > + if (DateTime.Century_months & PCF8563_CENTURY_MASK) { > + Time->Year += 100; > + } > + > + if (Capabilities != NULL) { > + Capabilities->Resolution = 1; > + Capabilities->Accuracy = 0; > + Capabilities->SetsToZero = TRUE; > + } > + return EFI_SUCCESS; > +} > + > + > +/** > + Sets the current local time and date information. > + > + @param Time A pointer to the current time. > + > + @retval EFI_SUCCESS The operation completed successfully. > + @retval EFI_INVALID_PARAMETER A time field is out of range. > + @retval EFI_DEVICE_ERROR The time could not be set due due to hardware > + error. > + > +**/ > +EFI_STATUS > +EFIAPI > +LibSetTime ( > + IN EFI_TIME *Time > + ) > +{ > + RTC_SET_I2C_REQUEST Op; > + RTC_SET_DATETIME_PACKET Packet; > + EFI_STATUS Status; > + > + if (mI2cMaster == NULL) { > + return EFI_DEVICE_ERROR; > + } > + > + Packet.DateTime.VL_seconds = DecimalToBcd8 (Time->Second); > + Packet.DateTime.Minutes = DecimalToBcd8 (Time->Minute); > + Packet.DateTime.Hours = DecimalToBcd8 (Time->Hour); > + Packet.DateTime.Days = DecimalToBcd8 (Time->Day); > + Packet.DateTime.Weekdays = 0; > + Packet.DateTime.Century_months = DecimalToBcd8 (Time->Month); > + Packet.DateTime.Years = DecimalToBcd8 (Time->Year % 100); > + if (Time->Year >= EPOCH_BASE + 100) { > + if (Time->Year >= EPOCH_BASE + 200) { > + return EFI_DEVICE_ERROR; > + } > + Packet.DateTime.Century_months |= PCF8563_CENTURY_MASK; > + } > + > + Packet.Reg = PCF8563_DATA_REG_OFFSET; > + > + Op.OperationCount = 1; > + Op.Operation[0].Flags = 0; > + Op.Operation[0].LengthInBytes = sizeof (RTC_SET_DATETIME_PACKET); > + Op.Operation[0].Buffer = (VOID *)&Packet; > + > + Status = mI2cMaster->StartRequest (mI2cMaster, SLAVE_ADDRESS, > + (VOID *)&Op, NULL, NULL); > + if (EFI_ERROR (Status)) { > + return EFI_DEVICE_ERROR; > + } > + return EFI_SUCCESS; > +} > + > + > +/** > + Returns the current wakeup alarm clock setting. > + > + @param Enabled Indicates if the alarm is currently enabled or > + disabled. > + @param Pending Indicates if the alarm signal is pending and > + requires acknowledgement. > + @param Time The current alarm setting. > + > + @retval EFI_SUCCESS The alarm settings were returned. > + @retval EFI_INVALID_PARAMETER Any parameter is NULL. > + @retval EFI_DEVICE_ERROR The wakeup time could not be retrieved due to a > + hardware error. > + @retval EFI_UNSUPPORTED A wakeup timer is not supported on this > + platform. > + > +**/ > +EFI_STATUS > +EFIAPI > +LibGetWakeupTime ( > + OUT BOOLEAN *Enabled, > + OUT BOOLEAN *Pending, > + OUT EFI_TIME *Time > + ) > +{ > + // > + // Currently unimplemented. The PCF8563 does not support setting the alarm > + // for an arbitrary date/time, but only for a minute/hour/day/weekday > + // combination. It should also depend on a platform specific setting that > + // indicates whether the PCF8563's interrupt line is connected in a way that > + // allows it to power up the system in the first place. > + // > + return EFI_UNSUPPORTED; > +} > + > + > +/** > + Sets the system wakeup alarm clock time. > + > + @param Enabled Enable or disable the wakeup alarm. > + @param Time If Enable is TRUE, the time to set the wakeup > + alarm for. > + > + @retval EFI_SUCCESS If Enable is TRUE, then the wakeup alarm was > + enabled. If Enable is FALSE, then the wakeup > + alarm was disabled. > + @retval EFI_INVALID_PARAMETER A time field is out of range. > + @retval EFI_DEVICE_ERROR The wakeup time could not be set due to a > + hardware error. > + @retval EFI_UNSUPPORTED A wakeup timer is not supported on this > + platform. > + > +**/ > +EFI_STATUS > +EFIAPI > +LibSetWakeupTime ( > + IN BOOLEAN Enabled, > + OUT EFI_TIME *Time > + ) > +{ > + // see comment above > + return EFI_UNSUPPORTED; > +} > + > +STATIC > +VOID > +DriverRegistrationEvent ( > + IN EFI_EVENT Event, > + IN VOID *Context > + ) > +{ > + EFI_HANDLE Handle[2]; > + UINTN BufferSize; > + EFI_STATUS Status; > + EFI_I2C_MASTER_PROTOCOL *I2cMaster; > + UINTN BusFrequency; > + > + // > + // Try to connect the newly registered driver to our handle. > + // > + do { > + BufferSize = sizeof (EFI_HANDLE); > + Status = gBS->LocateHandle (ByRegisterNotify, > + &gEfiDriverBindingProtocolGuid, > + mDriverEventRegistration, > + &BufferSize, > + Handle); > + if (EFI_ERROR (Status)) { > + if (Status != EFI_NOT_FOUND) { > + DEBUG ((DEBUG_WARN, "%a: gBS->LocateHandle () returned %r\n", > + __FUNCTION__, Status)); > + } > + break; > + } > + > + // > + // Check if we can connect our handle to this driver. > + // > + Handle[1] = NULL; > + Status = gBS->ConnectController (mI2cMasterHandle, Handle, NULL, FALSE); > + if (EFI_ERROR (Status)) { > + continue; > + } > + > + DEBUG ((DEBUG_INFO, "%a: found I2C master!\n", __FUNCTION__)); > + > + gBS->CloseEvent (Event); > + > + Status = gBS->OpenProtocol (mI2cMasterHandle, &gEfiI2cMasterProtocolGuid, > + (VOID **)&I2cMaster, gImageHandle, NULL, > + EFI_OPEN_PROTOCOL_EXCLUSIVE); > + ASSERT_EFI_ERROR (Status); > + > + Status = I2cMaster->Reset (I2cMaster); > + if (EFI_ERROR (Status)) { > + DEBUG ((DEBUG_ERROR, "%a: I2CMaster->Reset () failed - %r\n", > + __FUNCTION__, Status)); > + break; > + } > + > + BusFrequency = FixedPcdGet16 (PcdI2cBusFrequency); > + Status = I2cMaster->SetBusFrequency (I2cMaster, &BusFrequency); > + if (EFI_ERROR (Status)) { > + DEBUG ((DEBUG_ERROR, "%a: I2CMaster->SetBusFrequency () failed - %r\n", > + __FUNCTION__, Status)); > + break; > + } > + > + mI2cMaster = I2cMaster; > + break; > + } while (TRUE); > +} > + > +/** > + Fixup internal data so that EFI can be call in virtual mode. > + Call the passed in Child Notify event and convert any pointers in > + lib to virtual mode. > + > + @param[in] Event The Event that is being processed > + @param[in] Context Event Context > +**/ > +VOID > +EFIAPI > +LibRtcVirtualNotifyEvent ( > + IN EFI_EVENT Event, > + IN VOID *Context > + ) > +{ > + EfiConvertPointer (0x0, (VOID **)&mI2cMaster); > +} > + > +/** > + Library entry point > + > + @param ImageHandle Handle that identifies the loaded image. > + @param SystemTable System Table for this image. > + > + @retval EFI_SUCCESS The operation completed successfully. > + > +**/ > +EFI_STATUS > +EFIAPI > +LibRtcInitialize ( > + IN EFI_HANDLE ImageHandle, > + IN EFI_SYSTEM_TABLE *SystemTable > + ) > +{ > + EFI_STATUS Status; > + UINTN BufferSize; > + > + // > + // Find the handle that marks the controller > + // that will provide the I2C master protocol. > + // > + BufferSize = sizeof (EFI_HANDLE); > + Status = gBS->LocateHandle (ByProtocol, > + &gPcf8563RealTimeClockLibI2cMasterProtolGuid, NULL, > + &BufferSize, &mI2cMasterHandle); > + ASSERT_EFI_ERROR (Status); > + > + // > + // Register a protocol registration notification callback on the driver > + // binding protocol so we can attempt to connect our I2C master to it > + // as soon as it appears. > + // > + EfiCreateProtocolNotifyEvent ( > + &gEfiDriverBindingProtocolGuid, > + TPL_CALLBACK, > + DriverRegistrationEvent, > + NULL, > + &mDriverEventRegistration); > + > + // > + // Register for the virtual address change event > + // > + Status = gBS->CreateEventEx (EVT_NOTIFY_SIGNAL, TPL_NOTIFY, > + LibRtcVirtualNotifyEvent, NULL, > + &gEfiEventVirtualAddressChangeGuid, > + &mRtcVirtualAddrChangeEvent); > + ASSERT_EFI_ERROR (Status); > + > + return EFI_SUCCESS; > +} > diff --git a/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.dec b/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.dec > new file mode 100644 > index 000000000000..3fefa64eefdf > --- /dev/null > +++ b/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.dec > @@ -0,0 +1,29 @@ > +#/** @file > +# > +# Copyright (c) 2017, Linaro, Ltd. All rights reserved.<BR> > +# > +# This program and the accompanying materials > +# are licensed and made available under the terms and conditions of the BSD License > +# which accompanies this distribution. The full text of the license may be found at > +# http://opensource.org/licenses/bsd-license.php > +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > +# > +# > +#**/ > + > +[Defines] > + DEC_SPECIFICATION = 0x0001001A > + PACKAGE_NAME = Pcf8563RealTimeClockLib > + PACKAGE_GUID = 44d63668-c86b-446a-b303-f3a5176702aa > + PACKAGE_VERSION = 0.1 > + > +[Guids] > + gPcf8563RealTimeClockLibTokenSpaceGuid = { 0xaaf5b169, 0x93a0, 0x4d60, { 0xba, 0xe4, 0x06, 0x07, 0x92, 0x8e, 0x63, 0xdd }} > + > +[Protocols] > + gPcf8563RealTimeClockLibI2cMasterProtolGuid = { 0xa6af18ae, 0x3bd5, 0x4af9, { 0xbb, 0x6a, 0xdb, 0x85, 0x07, 0x62, 0x81, 0x38 }} > + > +[PcdsFixedAtBuild] > + gPcf8563RealTimeClockLibTokenSpaceGuid.PcdI2cSlaveAddress|0x51|UINT8|0x00000001 > + gPcf8563RealTimeClockLibTokenSpaceGuid.PcdI2cBusFrequency|400000|UINT32|0x00000002 Could we have a unit comment for the frequency here? > diff --git a/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.inf b/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.inf > new file mode 100644 > index 000000000000..e1e001162144 > --- /dev/null > +++ b/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.inf > @@ -0,0 +1,52 @@ > +#/** @file > +# > +# Copyright (c) 2017, Linaro, Ltd. All rights reserved.<BR> > +# > +# This program and the accompanying materials > +# are licensed and made available under the terms and conditions of the BSD License > +# which accompanies this distribution. The full text of the license may be found at > +# http://opensource.org/licenses/bsd-license.php > +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > +# > +# > +#**/ > + > +[Defines] > + INF_VERSION = 0x0001001A > + BASE_NAME = Pcf8563RealTimeClockLib > + FILE_GUID = 1e3d33f3-a671-4116-bd81-6b435296c1e0 > + MODULE_TYPE = DXE_DRIVER > + VERSION_STRING = 1.0 > + LIBRARY_CLASS = RealTimeClockLib > + > +[Sources.common] > + Pcf8563RealTimeClockLib.c > + > +[Packages] > + MdePkg/MdePkg.dec > + EmbeddedPkg/EmbeddedPkg.dec Flip above two lines? If you can fold in the three minor comments above: Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> > + Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.dec > + > +[LibraryClasses] > + BaseMemoryLib > + DebugLib > + IoLib > + UefiBootServicesTableLib > + UefiLib > + UefiRuntimeLib > + > +[Guids] > + gEfiEventVirtualAddressChangeGuid > + > +[Protocols] > + gEfiDriverBindingProtocolGuid ## CONSUMES > + gEfiI2cMasterProtocolGuid ## CONSUMES > + gPcf8563RealTimeClockLibI2cMasterProtolGuid ## CONSUMES > + > +[FixedPcd] > + gPcf8563RealTimeClockLibTokenSpaceGuid.PcdI2cSlaveAddress > + gPcf8563RealTimeClockLibTokenSpaceGuid.PcdI2cBusFrequency > + > +[Depex] > + gPcf8563RealTimeClockLibI2cMasterProtolGuid > -- > 2.11.0 > _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
On 17 November 2017 at 16:39, Leif Lindholm <leif.lindholm@linaro.org> wrote: > On Fri, Nov 10, 2017 at 02:21:23PM +0000, Ard Biesheuvel wrote: >> Add a RealTimeClockLib implementation for the NXP PCF8563 as used on >> the Socionext Developer Box board. Note that the standard I2C protocol >> stack does not support runtime use, so this driver invokes the I2C master >> protocol directly. This requires support from the platform side as well, >> and so this driver will only attach to a I2C master that has the >> gPcf8563RealTimeClockLibI2cMasterProtolGuid protocol installed on its >> handle. It is up to the platform to ensure that the driver producing >> the I2C master protocol in question is runtime capable, and is not >> shared with the I2C protocol stack (i.e., it should not have the I2C >> Bus Configuration Management protocol installed as well). > > Any chance you can flip the order of this and the subsequent one if > this one explicitly won't bind unless... > You mean testing for the I2C Bus Configuration Management protocol, and giving up if it is installed on the same handle? Yeah that could work >> Contributed-under: TianoCore Contribution Agreement 1.1 >> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> >> --- >> Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.c | 402 ++++++++++++++++++++ >> Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.dec | 29 ++ >> Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.inf | 52 +++ >> 3 files changed, 483 insertions(+) >> >> diff --git a/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.c b/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.c >> new file mode 100644 >> index 000000000000..67f8e7de4025 >> --- /dev/null >> +++ b/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.c >> @@ -0,0 +1,402 @@ >> +/** @file >> + >> + Copyright (c) 2017, Linaro, Ltd. All rights reserved.<BR> >> + >> + This program and the accompanying materials >> + are licensed and made available under the terms and conditions of the BSD License >> + which accompanies this distribution. The full text of the license may be found at >> + http://opensource.org/licenses/bsd-license.php >> + >> + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, >> + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. >> + >> +**/ >> + >> +#include <PiDxe.h> >> +#include <Library/DebugLib.h> >> +#include <Library/IoLib.h> >> +#include <Library/RealTimeClockLib.h> >> +#include <Library/UefiBootServicesTableLib.h> >> +#include <Library/UefiLib.h> >> +#include <Library/UefiRuntimeLib.h> >> +#include <Protocol/I2cMaster.h> >> + >> +#define SLAVE_ADDRESS (FixedPcdGet8 (PcdI2cSlaveAddress)) >> +#define PCF8563_DATA_REG_OFFSET 0x2 >> + >> +#define PCF8563_SECONDS_MASK 0x7f >> +#define PCF8563_MINUTES_MASK 0x7f >> +#define PCF8563_HOURS_MASK 0x3f >> +#define PCF8563_DAYS_MASK 0x3f >> +#define PCF8563_WEEKDAYS_MASK 0x07 >> +#define PCF8563_MONTHS_MASK 0x1f >> +#define PCF8563_CENTURY_MASK 0x80 >> + >> +// >> +// The PCF8563 has a 'century' flag, which means it could theoretically span >> +// 200 years. However, it treats all years divisible by 4 as leap years, >> +// including the years 1900 and 2100 (which are not leap years), so the only >> +// sane base year is 2000 (which was a leap year). >> +// >> +#define EPOCH_BASE 2000 >> + >> +STATIC EFI_HANDLE mI2cMasterHandle; >> +STATIC VOID *mDriverEventRegistration; >> +STATIC EFI_I2C_MASTER_PROTOCOL *mI2cMaster; >> +STATIC EFI_EVENT mRtcVirtualAddrChangeEvent; >> + >> +#pragma pack(1) >> +typedef struct { >> + UINT8 VL_seconds; >> + UINT8 Minutes; >> + UINT8 Hours; >> + UINT8 Days; >> + UINT8 Weekdays; >> + UINT8 Century_months; >> + UINT8 Years; >> +} RTC_DATETIME; >> + >> +typedef struct { >> + UINT8 Reg; >> + RTC_DATETIME DateTime; >> +} RTC_SET_DATETIME_PACKET; >> +#pragma pack() >> + >> +typedef struct { >> + UINTN OperationCount; >> + EFI_I2C_OPERATION SetAddressOp; >> + EFI_I2C_OPERATION GetDateTimeOp; >> +} RTC_GET_I2C_REQUEST; >> + >> +typedef EFI_I2C_REQUEST_PACKET RTC_SET_I2C_REQUEST; >> +/** >> + Returns the current time and date information, and the time-keeping >> + capabilities of the hardware platform. >> + >> + @param Time A pointer to storage to receive a snapshot of >> + the current time. >> + @param Capabilities An optional pointer to a buffer to receive the >> + real time clock device's capabilities. >> + >> + @retval EFI_SUCCESS The operation completed successfully. >> + @retval EFI_INVALID_PARAMETER Time is NULL. >> + @retval EFI_DEVICE_ERROR The time could not be retrieved due to hardware >> + error. >> + >> +**/ >> +EFI_STATUS >> +EFIAPI >> +LibGetTime ( >> + OUT EFI_TIME *Time, >> + OUT EFI_TIME_CAPABILITIES *Capabilities >> + ) >> +{ >> + RTC_GET_I2C_REQUEST Op; >> + RTC_DATETIME DateTime; >> + EFI_STATUS Status; >> + UINT8 Reg; >> + >> + if (Time == NULL) { >> + return EFI_INVALID_PARAMETER; >> + } >> + >> + if (mI2cMaster == NULL) { >> + return EFI_DEVICE_ERROR; >> + } >> + >> + Reg = PCF8563_DATA_REG_OFFSET; >> + >> + Op.OperationCount = 2; >> + >> + Op.SetAddressOp.Flags = 0; >> + Op.SetAddressOp.LengthInBytes = 1; >> + Op.SetAddressOp.Buffer = &Reg; >> + >> + Op.GetDateTimeOp.Flags = I2C_FLAG_READ; >> + Op.GetDateTimeOp.LengthInBytes = sizeof (RTC_DATETIME); >> + Op.GetDateTimeOp.Buffer = (VOID *)&DateTime; >> + >> + Status = mI2cMaster->StartRequest (mI2cMaster, SLAVE_ADDRESS, >> + (VOID *)&Op, NULL, NULL); >> + if (EFI_ERROR (Status)) { >> + return EFI_DEVICE_ERROR; >> + } >> + >> + Time->Second = BcdToDecimal8 (DateTime.VL_seconds & PCF8563_SECONDS_MASK); >> + Time->Minute = BcdToDecimal8 (DateTime.Minutes & PCF8563_MINUTES_MASK); >> + Time->Hour = BcdToDecimal8 (DateTime.Hours & PCF8563_HOURS_MASK); >> + Time->Day = BcdToDecimal8 (DateTime.Days & PCF8563_DAYS_MASK); >> + Time->Month = BcdToDecimal8 (DateTime.Century_months & PCF8563_MONTHS_MASK); >> + Time->Year = BcdToDecimal8 (DateTime.Years) + EPOCH_BASE; >> + >> + if (DateTime.Century_months & PCF8563_CENTURY_MASK) { >> + Time->Year += 100; >> + } >> + >> + if (Capabilities != NULL) { >> + Capabilities->Resolution = 1; >> + Capabilities->Accuracy = 0; >> + Capabilities->SetsToZero = TRUE; >> + } >> + return EFI_SUCCESS; >> +} >> + >> + >> +/** >> + Sets the current local time and date information. >> + >> + @param Time A pointer to the current time. >> + >> + @retval EFI_SUCCESS The operation completed successfully. >> + @retval EFI_INVALID_PARAMETER A time field is out of range. >> + @retval EFI_DEVICE_ERROR The time could not be set due due to hardware >> + error. >> + >> +**/ >> +EFI_STATUS >> +EFIAPI >> +LibSetTime ( >> + IN EFI_TIME *Time >> + ) >> +{ >> + RTC_SET_I2C_REQUEST Op; >> + RTC_SET_DATETIME_PACKET Packet; >> + EFI_STATUS Status; >> + >> + if (mI2cMaster == NULL) { >> + return EFI_DEVICE_ERROR; >> + } >> + >> + Packet.DateTime.VL_seconds = DecimalToBcd8 (Time->Second); >> + Packet.DateTime.Minutes = DecimalToBcd8 (Time->Minute); >> + Packet.DateTime.Hours = DecimalToBcd8 (Time->Hour); >> + Packet.DateTime.Days = DecimalToBcd8 (Time->Day); >> + Packet.DateTime.Weekdays = 0; >> + Packet.DateTime.Century_months = DecimalToBcd8 (Time->Month); >> + Packet.DateTime.Years = DecimalToBcd8 (Time->Year % 100); >> + if (Time->Year >= EPOCH_BASE + 100) { >> + if (Time->Year >= EPOCH_BASE + 200) { >> + return EFI_DEVICE_ERROR; >> + } >> + Packet.DateTime.Century_months |= PCF8563_CENTURY_MASK; >> + } >> + >> + Packet.Reg = PCF8563_DATA_REG_OFFSET; >> + >> + Op.OperationCount = 1; >> + Op.Operation[0].Flags = 0; >> + Op.Operation[0].LengthInBytes = sizeof (RTC_SET_DATETIME_PACKET); >> + Op.Operation[0].Buffer = (VOID *)&Packet; >> + >> + Status = mI2cMaster->StartRequest (mI2cMaster, SLAVE_ADDRESS, >> + (VOID *)&Op, NULL, NULL); >> + if (EFI_ERROR (Status)) { >> + return EFI_DEVICE_ERROR; >> + } >> + return EFI_SUCCESS; >> +} >> + >> + >> +/** >> + Returns the current wakeup alarm clock setting. >> + >> + @param Enabled Indicates if the alarm is currently enabled or >> + disabled. >> + @param Pending Indicates if the alarm signal is pending and >> + requires acknowledgement. >> + @param Time The current alarm setting. >> + >> + @retval EFI_SUCCESS The alarm settings were returned. >> + @retval EFI_INVALID_PARAMETER Any parameter is NULL. >> + @retval EFI_DEVICE_ERROR The wakeup time could not be retrieved due to a >> + hardware error. >> + @retval EFI_UNSUPPORTED A wakeup timer is not supported on this >> + platform. >> + >> +**/ >> +EFI_STATUS >> +EFIAPI >> +LibGetWakeupTime ( >> + OUT BOOLEAN *Enabled, >> + OUT BOOLEAN *Pending, >> + OUT EFI_TIME *Time >> + ) >> +{ >> + // >> + // Currently unimplemented. The PCF8563 does not support setting the alarm >> + // for an arbitrary date/time, but only for a minute/hour/day/weekday >> + // combination. It should also depend on a platform specific setting that >> + // indicates whether the PCF8563's interrupt line is connected in a way that >> + // allows it to power up the system in the first place. >> + // >> + return EFI_UNSUPPORTED; >> +} >> + >> + >> +/** >> + Sets the system wakeup alarm clock time. >> + >> + @param Enabled Enable or disable the wakeup alarm. >> + @param Time If Enable is TRUE, the time to set the wakeup >> + alarm for. >> + >> + @retval EFI_SUCCESS If Enable is TRUE, then the wakeup alarm was >> + enabled. If Enable is FALSE, then the wakeup >> + alarm was disabled. >> + @retval EFI_INVALID_PARAMETER A time field is out of range. >> + @retval EFI_DEVICE_ERROR The wakeup time could not be set due to a >> + hardware error. >> + @retval EFI_UNSUPPORTED A wakeup timer is not supported on this >> + platform. >> + >> +**/ >> +EFI_STATUS >> +EFIAPI >> +LibSetWakeupTime ( >> + IN BOOLEAN Enabled, >> + OUT EFI_TIME *Time >> + ) >> +{ >> + // see comment above >> + return EFI_UNSUPPORTED; >> +} >> + >> +STATIC >> +VOID >> +DriverRegistrationEvent ( >> + IN EFI_EVENT Event, >> + IN VOID *Context >> + ) >> +{ >> + EFI_HANDLE Handle[2]; >> + UINTN BufferSize; >> + EFI_STATUS Status; >> + EFI_I2C_MASTER_PROTOCOL *I2cMaster; >> + UINTN BusFrequency; >> + >> + // >> + // Try to connect the newly registered driver to our handle. >> + // >> + do { >> + BufferSize = sizeof (EFI_HANDLE); >> + Status = gBS->LocateHandle (ByRegisterNotify, >> + &gEfiDriverBindingProtocolGuid, >> + mDriverEventRegistration, >> + &BufferSize, >> + Handle); >> + if (EFI_ERROR (Status)) { >> + if (Status != EFI_NOT_FOUND) { >> + DEBUG ((DEBUG_WARN, "%a: gBS->LocateHandle () returned %r\n", >> + __FUNCTION__, Status)); >> + } >> + break; >> + } >> + >> + // >> + // Check if we can connect our handle to this driver. >> + // >> + Handle[1] = NULL; >> + Status = gBS->ConnectController (mI2cMasterHandle, Handle, NULL, FALSE); >> + if (EFI_ERROR (Status)) { >> + continue; >> + } >> + >> + DEBUG ((DEBUG_INFO, "%a: found I2C master!\n", __FUNCTION__)); >> + >> + gBS->CloseEvent (Event); >> + >> + Status = gBS->OpenProtocol (mI2cMasterHandle, &gEfiI2cMasterProtocolGuid, >> + (VOID **)&I2cMaster, gImageHandle, NULL, >> + EFI_OPEN_PROTOCOL_EXCLUSIVE); >> + ASSERT_EFI_ERROR (Status); >> + >> + Status = I2cMaster->Reset (I2cMaster); >> + if (EFI_ERROR (Status)) { >> + DEBUG ((DEBUG_ERROR, "%a: I2CMaster->Reset () failed - %r\n", >> + __FUNCTION__, Status)); >> + break; >> + } >> + >> + BusFrequency = FixedPcdGet16 (PcdI2cBusFrequency); >> + Status = I2cMaster->SetBusFrequency (I2cMaster, &BusFrequency); >> + if (EFI_ERROR (Status)) { >> + DEBUG ((DEBUG_ERROR, "%a: I2CMaster->SetBusFrequency () failed - %r\n", >> + __FUNCTION__, Status)); >> + break; >> + } >> + >> + mI2cMaster = I2cMaster; >> + break; >> + } while (TRUE); >> +} >> + >> +/** >> + Fixup internal data so that EFI can be call in virtual mode. >> + Call the passed in Child Notify event and convert any pointers in >> + lib to virtual mode. >> + >> + @param[in] Event The Event that is being processed >> + @param[in] Context Event Context >> +**/ >> +VOID >> +EFIAPI >> +LibRtcVirtualNotifyEvent ( >> + IN EFI_EVENT Event, >> + IN VOID *Context >> + ) >> +{ >> + EfiConvertPointer (0x0, (VOID **)&mI2cMaster); >> +} >> + >> +/** >> + Library entry point >> + >> + @param ImageHandle Handle that identifies the loaded image. >> + @param SystemTable System Table for this image. >> + >> + @retval EFI_SUCCESS The operation completed successfully. >> + >> +**/ >> +EFI_STATUS >> +EFIAPI >> +LibRtcInitialize ( >> + IN EFI_HANDLE ImageHandle, >> + IN EFI_SYSTEM_TABLE *SystemTable >> + ) >> +{ >> + EFI_STATUS Status; >> + UINTN BufferSize; >> + >> + // >> + // Find the handle that marks the controller >> + // that will provide the I2C master protocol. >> + // >> + BufferSize = sizeof (EFI_HANDLE); >> + Status = gBS->LocateHandle (ByProtocol, >> + &gPcf8563RealTimeClockLibI2cMasterProtolGuid, NULL, >> + &BufferSize, &mI2cMasterHandle); >> + ASSERT_EFI_ERROR (Status); >> + >> + // >> + // Register a protocol registration notification callback on the driver >> + // binding protocol so we can attempt to connect our I2C master to it >> + // as soon as it appears. >> + // >> + EfiCreateProtocolNotifyEvent ( >> + &gEfiDriverBindingProtocolGuid, >> + TPL_CALLBACK, >> + DriverRegistrationEvent, >> + NULL, >> + &mDriverEventRegistration); >> + >> + // >> + // Register for the virtual address change event >> + // >> + Status = gBS->CreateEventEx (EVT_NOTIFY_SIGNAL, TPL_NOTIFY, >> + LibRtcVirtualNotifyEvent, NULL, >> + &gEfiEventVirtualAddressChangeGuid, >> + &mRtcVirtualAddrChangeEvent); >> + ASSERT_EFI_ERROR (Status); >> + >> + return EFI_SUCCESS; >> +} >> diff --git a/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.dec b/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.dec >> new file mode 100644 >> index 000000000000..3fefa64eefdf >> --- /dev/null >> +++ b/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.dec >> @@ -0,0 +1,29 @@ >> +#/** @file >> +# >> +# Copyright (c) 2017, Linaro, Ltd. All rights reserved.<BR> >> +# >> +# This program and the accompanying materials >> +# are licensed and made available under the terms and conditions of the BSD License >> +# which accompanies this distribution. The full text of the license may be found at >> +# http://opensource.org/licenses/bsd-license.php >> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, >> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. >> +# >> +# >> +#**/ >> + >> +[Defines] >> + DEC_SPECIFICATION = 0x0001001A >> + PACKAGE_NAME = Pcf8563RealTimeClockLib >> + PACKAGE_GUID = 44d63668-c86b-446a-b303-f3a5176702aa >> + PACKAGE_VERSION = 0.1 >> + >> +[Guids] >> + gPcf8563RealTimeClockLibTokenSpaceGuid = { 0xaaf5b169, 0x93a0, 0x4d60, { 0xba, 0xe4, 0x06, 0x07, 0x92, 0x8e, 0x63, 0xdd }} >> + >> +[Protocols] >> + gPcf8563RealTimeClockLibI2cMasterProtolGuid = { 0xa6af18ae, 0x3bd5, 0x4af9, { 0xbb, 0x6a, 0xdb, 0x85, 0x07, 0x62, 0x81, 0x38 }} >> + >> +[PcdsFixedAtBuild] >> + gPcf8563RealTimeClockLibTokenSpaceGuid.PcdI2cSlaveAddress|0x51|UINT8|0x00000001 >> + gPcf8563RealTimeClockLibTokenSpaceGuid.PcdI2cBusFrequency|400000|UINT32|0x00000002 > > Could we have a unit comment for the frequency here? > Yeah, forgot about that - sorry. >> diff --git a/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.inf b/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.inf >> new file mode 100644 >> index 000000000000..e1e001162144 >> --- /dev/null >> +++ b/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.inf >> @@ -0,0 +1,52 @@ >> +#/** @file >> +# >> +# Copyright (c) 2017, Linaro, Ltd. All rights reserved.<BR> >> +# >> +# This program and the accompanying materials >> +# are licensed and made available under the terms and conditions of the BSD License >> +# which accompanies this distribution. The full text of the license may be found at >> +# http://opensource.org/licenses/bsd-license.php >> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, >> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. >> +# >> +# >> +#**/ >> + >> +[Defines] >> + INF_VERSION = 0x0001001A >> + BASE_NAME = Pcf8563RealTimeClockLib >> + FILE_GUID = 1e3d33f3-a671-4116-bd81-6b435296c1e0 >> + MODULE_TYPE = DXE_DRIVER >> + VERSION_STRING = 1.0 >> + LIBRARY_CLASS = RealTimeClockLib >> + >> +[Sources.common] >> + Pcf8563RealTimeClockLib.c >> + >> +[Packages] >> + MdePkg/MdePkg.dec >> + EmbeddedPkg/EmbeddedPkg.dec > > Flip above two lines? > Sure > If you can fold in the three minor comments above: > Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> > Thanks >> + Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.dec >> + >> +[LibraryClasses] >> + BaseMemoryLib >> + DebugLib >> + IoLib >> + UefiBootServicesTableLib >> + UefiLib >> + UefiRuntimeLib >> + >> +[Guids] >> + gEfiEventVirtualAddressChangeGuid >> + >> +[Protocols] >> + gEfiDriverBindingProtocolGuid ## CONSUMES >> + gEfiI2cMasterProtocolGuid ## CONSUMES >> + gPcf8563RealTimeClockLibI2cMasterProtolGuid ## CONSUMES >> + >> +[FixedPcd] >> + gPcf8563RealTimeClockLibTokenSpaceGuid.PcdI2cSlaveAddress >> + gPcf8563RealTimeClockLibTokenSpaceGuid.PcdI2cBusFrequency >> + >> +[Depex] >> + gPcf8563RealTimeClockLibI2cMasterProtolGuid >> -- >> 2.11.0 >> _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
diff --git a/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.c b/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.c new file mode 100644 index 000000000000..67f8e7de4025 --- /dev/null +++ b/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.c @@ -0,0 +1,402 @@ +/** @file + + Copyright (c) 2017, Linaro, Ltd. All rights reserved.<BR> + + This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD License + which accompanies this distribution. The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + +#include <PiDxe.h> +#include <Library/DebugLib.h> +#include <Library/IoLib.h> +#include <Library/RealTimeClockLib.h> +#include <Library/UefiBootServicesTableLib.h> +#include <Library/UefiLib.h> +#include <Library/UefiRuntimeLib.h> +#include <Protocol/I2cMaster.h> + +#define SLAVE_ADDRESS (FixedPcdGet8 (PcdI2cSlaveAddress)) +#define PCF8563_DATA_REG_OFFSET 0x2 + +#define PCF8563_SECONDS_MASK 0x7f +#define PCF8563_MINUTES_MASK 0x7f +#define PCF8563_HOURS_MASK 0x3f +#define PCF8563_DAYS_MASK 0x3f +#define PCF8563_WEEKDAYS_MASK 0x07 +#define PCF8563_MONTHS_MASK 0x1f +#define PCF8563_CENTURY_MASK 0x80 + +// +// The PCF8563 has a 'century' flag, which means it could theoretically span +// 200 years. However, it treats all years divisible by 4 as leap years, +// including the years 1900 and 2100 (which are not leap years), so the only +// sane base year is 2000 (which was a leap year). +// +#define EPOCH_BASE 2000 + +STATIC EFI_HANDLE mI2cMasterHandle; +STATIC VOID *mDriverEventRegistration; +STATIC EFI_I2C_MASTER_PROTOCOL *mI2cMaster; +STATIC EFI_EVENT mRtcVirtualAddrChangeEvent; + +#pragma pack(1) +typedef struct { + UINT8 VL_seconds; + UINT8 Minutes; + UINT8 Hours; + UINT8 Days; + UINT8 Weekdays; + UINT8 Century_months; + UINT8 Years; +} RTC_DATETIME; + +typedef struct { + UINT8 Reg; + RTC_DATETIME DateTime; +} RTC_SET_DATETIME_PACKET; +#pragma pack() + +typedef struct { + UINTN OperationCount; + EFI_I2C_OPERATION SetAddressOp; + EFI_I2C_OPERATION GetDateTimeOp; +} RTC_GET_I2C_REQUEST; + +typedef EFI_I2C_REQUEST_PACKET RTC_SET_I2C_REQUEST; +/** + Returns the current time and date information, and the time-keeping + capabilities of the hardware platform. + + @param Time A pointer to storage to receive a snapshot of + the current time. + @param Capabilities An optional pointer to a buffer to receive the + real time clock device's capabilities. + + @retval EFI_SUCCESS The operation completed successfully. + @retval EFI_INVALID_PARAMETER Time is NULL. + @retval EFI_DEVICE_ERROR The time could not be retrieved due to hardware + error. + +**/ +EFI_STATUS +EFIAPI +LibGetTime ( + OUT EFI_TIME *Time, + OUT EFI_TIME_CAPABILITIES *Capabilities + ) +{ + RTC_GET_I2C_REQUEST Op; + RTC_DATETIME DateTime; + EFI_STATUS Status; + UINT8 Reg; + + if (Time == NULL) { + return EFI_INVALID_PARAMETER; + } + + if (mI2cMaster == NULL) { + return EFI_DEVICE_ERROR; + } + + Reg = PCF8563_DATA_REG_OFFSET; + + Op.OperationCount = 2; + + Op.SetAddressOp.Flags = 0; + Op.SetAddressOp.LengthInBytes = 1; + Op.SetAddressOp.Buffer = &Reg; + + Op.GetDateTimeOp.Flags = I2C_FLAG_READ; + Op.GetDateTimeOp.LengthInBytes = sizeof (RTC_DATETIME); + Op.GetDateTimeOp.Buffer = (VOID *)&DateTime; + + Status = mI2cMaster->StartRequest (mI2cMaster, SLAVE_ADDRESS, + (VOID *)&Op, NULL, NULL); + if (EFI_ERROR (Status)) { + return EFI_DEVICE_ERROR; + } + + Time->Second = BcdToDecimal8 (DateTime.VL_seconds & PCF8563_SECONDS_MASK); + Time->Minute = BcdToDecimal8 (DateTime.Minutes & PCF8563_MINUTES_MASK); + Time->Hour = BcdToDecimal8 (DateTime.Hours & PCF8563_HOURS_MASK); + Time->Day = BcdToDecimal8 (DateTime.Days & PCF8563_DAYS_MASK); + Time->Month = BcdToDecimal8 (DateTime.Century_months & PCF8563_MONTHS_MASK); + Time->Year = BcdToDecimal8 (DateTime.Years) + EPOCH_BASE; + + if (DateTime.Century_months & PCF8563_CENTURY_MASK) { + Time->Year += 100; + } + + if (Capabilities != NULL) { + Capabilities->Resolution = 1; + Capabilities->Accuracy = 0; + Capabilities->SetsToZero = TRUE; + } + return EFI_SUCCESS; +} + + +/** + Sets the current local time and date information. + + @param Time A pointer to the current time. + + @retval EFI_SUCCESS The operation completed successfully. + @retval EFI_INVALID_PARAMETER A time field is out of range. + @retval EFI_DEVICE_ERROR The time could not be set due due to hardware + error. + +**/ +EFI_STATUS +EFIAPI +LibSetTime ( + IN EFI_TIME *Time + ) +{ + RTC_SET_I2C_REQUEST Op; + RTC_SET_DATETIME_PACKET Packet; + EFI_STATUS Status; + + if (mI2cMaster == NULL) { + return EFI_DEVICE_ERROR; + } + + Packet.DateTime.VL_seconds = DecimalToBcd8 (Time->Second); + Packet.DateTime.Minutes = DecimalToBcd8 (Time->Minute); + Packet.DateTime.Hours = DecimalToBcd8 (Time->Hour); + Packet.DateTime.Days = DecimalToBcd8 (Time->Day); + Packet.DateTime.Weekdays = 0; + Packet.DateTime.Century_months = DecimalToBcd8 (Time->Month); + Packet.DateTime.Years = DecimalToBcd8 (Time->Year % 100); + if (Time->Year >= EPOCH_BASE + 100) { + if (Time->Year >= EPOCH_BASE + 200) { + return EFI_DEVICE_ERROR; + } + Packet.DateTime.Century_months |= PCF8563_CENTURY_MASK; + } + + Packet.Reg = PCF8563_DATA_REG_OFFSET; + + Op.OperationCount = 1; + Op.Operation[0].Flags = 0; + Op.Operation[0].LengthInBytes = sizeof (RTC_SET_DATETIME_PACKET); + Op.Operation[0].Buffer = (VOID *)&Packet; + + Status = mI2cMaster->StartRequest (mI2cMaster, SLAVE_ADDRESS, + (VOID *)&Op, NULL, NULL); + if (EFI_ERROR (Status)) { + return EFI_DEVICE_ERROR; + } + return EFI_SUCCESS; +} + + +/** + Returns the current wakeup alarm clock setting. + + @param Enabled Indicates if the alarm is currently enabled or + disabled. + @param Pending Indicates if the alarm signal is pending and + requires acknowledgement. + @param Time The current alarm setting. + + @retval EFI_SUCCESS The alarm settings were returned. + @retval EFI_INVALID_PARAMETER Any parameter is NULL. + @retval EFI_DEVICE_ERROR The wakeup time could not be retrieved due to a + hardware error. + @retval EFI_UNSUPPORTED A wakeup timer is not supported on this + platform. + +**/ +EFI_STATUS +EFIAPI +LibGetWakeupTime ( + OUT BOOLEAN *Enabled, + OUT BOOLEAN *Pending, + OUT EFI_TIME *Time + ) +{ + // + // Currently unimplemented. The PCF8563 does not support setting the alarm + // for an arbitrary date/time, but only for a minute/hour/day/weekday + // combination. It should also depend on a platform specific setting that + // indicates whether the PCF8563's interrupt line is connected in a way that + // allows it to power up the system in the first place. + // + return EFI_UNSUPPORTED; +} + + +/** + Sets the system wakeup alarm clock time. + + @param Enabled Enable or disable the wakeup alarm. + @param Time If Enable is TRUE, the time to set the wakeup + alarm for. + + @retval EFI_SUCCESS If Enable is TRUE, then the wakeup alarm was + enabled. If Enable is FALSE, then the wakeup + alarm was disabled. + @retval EFI_INVALID_PARAMETER A time field is out of range. + @retval EFI_DEVICE_ERROR The wakeup time could not be set due to a + hardware error. + @retval EFI_UNSUPPORTED A wakeup timer is not supported on this + platform. + +**/ +EFI_STATUS +EFIAPI +LibSetWakeupTime ( + IN BOOLEAN Enabled, + OUT EFI_TIME *Time + ) +{ + // see comment above + return EFI_UNSUPPORTED; +} + +STATIC +VOID +DriverRegistrationEvent ( + IN EFI_EVENT Event, + IN VOID *Context + ) +{ + EFI_HANDLE Handle[2]; + UINTN BufferSize; + EFI_STATUS Status; + EFI_I2C_MASTER_PROTOCOL *I2cMaster; + UINTN BusFrequency; + + // + // Try to connect the newly registered driver to our handle. + // + do { + BufferSize = sizeof (EFI_HANDLE); + Status = gBS->LocateHandle (ByRegisterNotify, + &gEfiDriverBindingProtocolGuid, + mDriverEventRegistration, + &BufferSize, + Handle); + if (EFI_ERROR (Status)) { + if (Status != EFI_NOT_FOUND) { + DEBUG ((DEBUG_WARN, "%a: gBS->LocateHandle () returned %r\n", + __FUNCTION__, Status)); + } + break; + } + + // + // Check if we can connect our handle to this driver. + // + Handle[1] = NULL; + Status = gBS->ConnectController (mI2cMasterHandle, Handle, NULL, FALSE); + if (EFI_ERROR (Status)) { + continue; + } + + DEBUG ((DEBUG_INFO, "%a: found I2C master!\n", __FUNCTION__)); + + gBS->CloseEvent (Event); + + Status = gBS->OpenProtocol (mI2cMasterHandle, &gEfiI2cMasterProtocolGuid, + (VOID **)&I2cMaster, gImageHandle, NULL, + EFI_OPEN_PROTOCOL_EXCLUSIVE); + ASSERT_EFI_ERROR (Status); + + Status = I2cMaster->Reset (I2cMaster); + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, "%a: I2CMaster->Reset () failed - %r\n", + __FUNCTION__, Status)); + break; + } + + BusFrequency = FixedPcdGet16 (PcdI2cBusFrequency); + Status = I2cMaster->SetBusFrequency (I2cMaster, &BusFrequency); + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, "%a: I2CMaster->SetBusFrequency () failed - %r\n", + __FUNCTION__, Status)); + break; + } + + mI2cMaster = I2cMaster; + break; + } while (TRUE); +} + +/** + Fixup internal data so that EFI can be call in virtual mode. + Call the passed in Child Notify event and convert any pointers in + lib to virtual mode. + + @param[in] Event The Event that is being processed + @param[in] Context Event Context +**/ +VOID +EFIAPI +LibRtcVirtualNotifyEvent ( + IN EFI_EVENT Event, + IN VOID *Context + ) +{ + EfiConvertPointer (0x0, (VOID **)&mI2cMaster); +} + +/** + Library entry point + + @param ImageHandle Handle that identifies the loaded image. + @param SystemTable System Table for this image. + + @retval EFI_SUCCESS The operation completed successfully. + +**/ +EFI_STATUS +EFIAPI +LibRtcInitialize ( + IN EFI_HANDLE ImageHandle, + IN EFI_SYSTEM_TABLE *SystemTable + ) +{ + EFI_STATUS Status; + UINTN BufferSize; + + // + // Find the handle that marks the controller + // that will provide the I2C master protocol. + // + BufferSize = sizeof (EFI_HANDLE); + Status = gBS->LocateHandle (ByProtocol, + &gPcf8563RealTimeClockLibI2cMasterProtolGuid, NULL, + &BufferSize, &mI2cMasterHandle); + ASSERT_EFI_ERROR (Status); + + // + // Register a protocol registration notification callback on the driver + // binding protocol so we can attempt to connect our I2C master to it + // as soon as it appears. + // + EfiCreateProtocolNotifyEvent ( + &gEfiDriverBindingProtocolGuid, + TPL_CALLBACK, + DriverRegistrationEvent, + NULL, + &mDriverEventRegistration); + + // + // Register for the virtual address change event + // + Status = gBS->CreateEventEx (EVT_NOTIFY_SIGNAL, TPL_NOTIFY, + LibRtcVirtualNotifyEvent, NULL, + &gEfiEventVirtualAddressChangeGuid, + &mRtcVirtualAddrChangeEvent); + ASSERT_EFI_ERROR (Status); + + return EFI_SUCCESS; +} diff --git a/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.dec b/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.dec new file mode 100644 index 000000000000..3fefa64eefdf --- /dev/null +++ b/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.dec @@ -0,0 +1,29 @@ +#/** @file +# +# Copyright (c) 2017, Linaro, Ltd. All rights reserved.<BR> +# +# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the BSD License +# which accompanies this distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# +# +#**/ + +[Defines] + DEC_SPECIFICATION = 0x0001001A + PACKAGE_NAME = Pcf8563RealTimeClockLib + PACKAGE_GUID = 44d63668-c86b-446a-b303-f3a5176702aa + PACKAGE_VERSION = 0.1 + +[Guids] + gPcf8563RealTimeClockLibTokenSpaceGuid = { 0xaaf5b169, 0x93a0, 0x4d60, { 0xba, 0xe4, 0x06, 0x07, 0x92, 0x8e, 0x63, 0xdd }} + +[Protocols] + gPcf8563RealTimeClockLibI2cMasterProtolGuid = { 0xa6af18ae, 0x3bd5, 0x4af9, { 0xbb, 0x6a, 0xdb, 0x85, 0x07, 0x62, 0x81, 0x38 }} + +[PcdsFixedAtBuild] + gPcf8563RealTimeClockLibTokenSpaceGuid.PcdI2cSlaveAddress|0x51|UINT8|0x00000001 + gPcf8563RealTimeClockLibTokenSpaceGuid.PcdI2cBusFrequency|400000|UINT32|0x00000002 diff --git a/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.inf b/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.inf new file mode 100644 index 000000000000..e1e001162144 --- /dev/null +++ b/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.inf @@ -0,0 +1,52 @@ +#/** @file +# +# Copyright (c) 2017, Linaro, Ltd. All rights reserved.<BR> +# +# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the BSD License +# which accompanies this distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# +# +#**/ + +[Defines] + INF_VERSION = 0x0001001A + BASE_NAME = Pcf8563RealTimeClockLib + FILE_GUID = 1e3d33f3-a671-4116-bd81-6b435296c1e0 + MODULE_TYPE = DXE_DRIVER + VERSION_STRING = 1.0 + LIBRARY_CLASS = RealTimeClockLib + +[Sources.common] + Pcf8563RealTimeClockLib.c + +[Packages] + MdePkg/MdePkg.dec + EmbeddedPkg/EmbeddedPkg.dec + Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.dec + +[LibraryClasses] + BaseMemoryLib + DebugLib + IoLib + UefiBootServicesTableLib + UefiLib + UefiRuntimeLib + +[Guids] + gEfiEventVirtualAddressChangeGuid + +[Protocols] + gEfiDriverBindingProtocolGuid ## CONSUMES + gEfiI2cMasterProtocolGuid ## CONSUMES + gPcf8563RealTimeClockLibI2cMasterProtolGuid ## CONSUMES + +[FixedPcd] + gPcf8563RealTimeClockLibTokenSpaceGuid.PcdI2cSlaveAddress + gPcf8563RealTimeClockLibTokenSpaceGuid.PcdI2cBusFrequency + +[Depex] + gPcf8563RealTimeClockLibI2cMasterProtolGuid
Add a RealTimeClockLib implementation for the NXP PCF8563 as used on the Socionext Developer Box board. Note that the standard I2C protocol stack does not support runtime use, so this driver invokes the I2C master protocol directly. This requires support from the platform side as well, and so this driver will only attach to a I2C master that has the gPcf8563RealTimeClockLibI2cMasterProtolGuid protocol installed on its handle. It is up to the platform to ensure that the driver producing the I2C master protocol in question is runtime capable, and is not shared with the I2C protocol stack (i.e., it should not have the I2C Bus Configuration Management protocol installed as well). Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> --- Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.c | 402 ++++++++++++++++++++ Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.dec | 29 ++ Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.inf | 52 +++ 3 files changed, 483 insertions(+) -- 2.11.0 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel