diff mbox series

ARM: B15: fix unused label warnings

Message ID 20171218134126.2913861-1-arnd@arndb.de
State New
Headers show
Series ARM: B15: fix unused label warnings | expand

Commit Message

Arnd Bergmann Dec. 18, 2017, 1:41 p.m. UTC
The new conditionally compiled code leaves some labels and one
variable unreferenced when CONFIG_HOTPLUG_CPU and CONFIG_PM_SLEEP
are disabled:

arch/arm/mm/cache-b15-rac.c: In function 'b15_rac_init':
arch/arm/mm/cache-b15-rac.c:353:1: error: label 'out_unmap' defined but not used [-Werror=unused-label]
 out_unmap:
 ^~~~~~~~~
arch/arm/mm/cache-b15-rac.c:351:1: error: label 'out_cpu_dead' defined but not used [-Werror=unused-label]
 out_cpu_dead:
 ^~~~~~~~~~~~
At top level:
arch/arm/mm/cache-b15-rac.c:53:12: error: 'rac_config0_reg' defined but not used [-Werror=unused-variable]

This adds more #ifdefs around them.

Fixes: 55de88778f4b ("ARM: 8726/1: B15: Add CPU hotplug awareness")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

---
Florian, if this looks good to you, please forward the fix into Russell's
patch tracker, otherwise just send a better fix.
---
 arch/arm/mm/cache-b15-rac.c | 5 +++++
 1 file changed, 5 insertions(+)

-- 
2.9.0

Comments

Russell King (Oracle) Dec. 18, 2017, 1:44 p.m. UTC | #1
On Mon, Dec 18, 2017 at 02:41:11PM +0100, Arnd Bergmann wrote:
> The new conditionally compiled code leaves some labels and one

> variable unreferenced when CONFIG_HOTPLUG_CPU and CONFIG_PM_SLEEP

> are disabled:

> 

> arch/arm/mm/cache-b15-rac.c: In function 'b15_rac_init':

> arch/arm/mm/cache-b15-rac.c:353:1: error: label 'out_unmap' defined but not used [-Werror=unused-label]

>  out_unmap:

>  ^~~~~~~~~

> arch/arm/mm/cache-b15-rac.c:351:1: error: label 'out_cpu_dead' defined but not used [-Werror=unused-label]

>  out_cpu_dead:

>  ^~~~~~~~~~~~

> At top level:

> arch/arm/mm/cache-b15-rac.c:53:12: error: 'rac_config0_reg' defined but not used [-Werror=unused-variable]

> 

> This adds more #ifdefs around them.

> 

> Fixes: 55de88778f4b ("ARM: 8726/1: B15: Add CPU hotplug awareness")

> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

> ---

> Florian, if this looks good to you, please forward the fix into Russell's

> patch tracker, otherwise just send a better fix.


I'd prefer a better fix than yet more ifdefs...

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 8.8Mbps down 630kbps up
According to speedtest.net: 8.21Mbps down 510kbps up
Arnd Bergmann Dec. 18, 2017, 1:55 p.m. UTC | #2
On Mon, Dec 18, 2017 at 2:44 PM, Russell King - ARM Linux
<linux@armlinux.org.uk> wrote:
> On Mon, Dec 18, 2017 at 02:41:11PM +0100, Arnd Bergmann wrote:

>> The new conditionally compiled code leaves some labels and one

>> variable unreferenced when CONFIG_HOTPLUG_CPU and CONFIG_PM_SLEEP

>> are disabled:

>>

>> arch/arm/mm/cache-b15-rac.c: In function 'b15_rac_init':

>> arch/arm/mm/cache-b15-rac.c:353:1: error: label 'out_unmap' defined but not used [-Werror=unused-label]

>>  out_unmap:

>>  ^~~~~~~~~

>> arch/arm/mm/cache-b15-rac.c:351:1: error: label 'out_cpu_dead' defined but not used [-Werror=unused-label]

>>  out_cpu_dead:

>>  ^~~~~~~~~~~~

>> At top level:

>> arch/arm/mm/cache-b15-rac.c:53:12: error: 'rac_config0_reg' defined but not used [-Werror=unused-variable]

>>

>> This adds more #ifdefs around them.

>>

>> Fixes: 55de88778f4b ("ARM: 8726/1: B15: Add CPU hotplug awareness")

>> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

>> ---

>> Florian, if this looks good to you, please forward the fix into Russell's

>> patch tracker, otherwise just send a better fix.

>

> I'd prefer a better fix than yet more ifdefs...


Ok, I've reworked my patch now to replace the existing #ifdef with if
(IS_ENABLED())
checks instead, which makes it look much nicer.

I'll send the new version after more randconfig testing.

       Arnd
diff mbox series

Patch

diff --git a/arch/arm/mm/cache-b15-rac.c b/arch/arm/mm/cache-b15-rac.c
index f76988790011..24cb3b7a0501 100644
--- a/arch/arm/mm/cache-b15-rac.c
+++ b/arch/arm/mm/cache-b15-rac.c
@@ -50,7 +50,10 @@  extern void v7_flush_kern_cache_all(void);
 
 static void __iomem *b15_rac_base;
 static DEFINE_SPINLOCK(rac_lock);
+
+#if IS_ENABLED(CONFIG_HOTPLUG_CPU) || IS_ENABLED(CONFIG_PM_SLEEP)
 static u32 rac_config0_reg;
+#endif
 
 /* Initialization flag to avoid checking for b15_rac_base, and to prevent
  * multi-platform kernels from crashing here as well.
@@ -348,11 +351,13 @@  static int __init b15_rac_init(void)
 
 	goto out;
 
+#ifdef CONFIG_HOTPLUG_CPU
 out_cpu_dead:
 	cpuhp_remove_state_nocalls(CPUHP_AP_ARM_CACHE_B15_RAC_DYING);
 out_unmap:
 	unregister_reboot_notifier(&b15_rac_reboot_nb);
 	iounmap(b15_rac_base);
+#endif
 out:
 	of_node_put(dn);
 	return ret;