| Message ID | 20180620132032.12952-4-alex.bennee@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | Tweak code coverage reporting | expand |
On 06/20/2018 10:20 AM, Alex Bennée wrote: > This gives a more useful summary, sorted by descending % coverage, > after the tests have run. The final numbers will give an idea if our > coverage is getting better or worse. > > As quite a lot of lines don't get covered at all we filter out all the > 0% lines. If the file doesn't appear it is not being exercised. > > Signed-off-by: Alex Bennée <alex.bennee@linaro.org> > --- > .travis.yml | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/.travis.yml b/.travis.yml > index fabfe9ec34..83e0577464 100644 > --- a/.travis.yml > +++ b/.travis.yml > @@ -38,6 +38,7 @@ addons: > - libvte-2.90-dev > - sparse > - uuid-dev > + - gcovr > > # The channel name "irc.oftc.net#qemu" is encrypted against qemu/qemu > # to prevent IRC notifications from forks. This was created using: > @@ -81,6 +82,8 @@ matrix: > compiler: clang > # gprof/gcov are GCC features > - env: CONFIG="--enable-gprof --enable-gcov --disable-pie --target-list=aarch64-softmmu,arm-softmmu,i386-softmmu,mips-softmmu,mips64-softmmu,ppc64-softmmu,riscv64-softmmu,s390x-softmmu,x86_64-softmmu" > + after_success: > + - gcovr -p | grep -v "0%" | sed s/[0-9]\*[,-]//g Can we use 'fgrep -B 1 -v "0%"' (--before-context=1) to also remove the filepath line? Any idea why I get this? "(WARNING) Unrecognized GCOV output: '====='" Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> > compiler: gcc > # We manually include builds which we disable "make check" for > - env: CONFIG="--enable-debug --enable-tcg-interpreter" >
On 06/20/2018 10:20 AM, Alex Bennée wrote: > This gives a more useful summary, sorted by descending % coverage, > after the tests have run. The final numbers will give an idea if our > coverage is getting better or worse. > > As quite a lot of lines don't get covered at all we filter out all the > 0% lines. If the file doesn't appear it is not being exercised. > > Signed-off-by: Alex Bennée <alex.bennee@linaro.org> > --- > .travis.yml | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/.travis.yml b/.travis.yml > index fabfe9ec34..83e0577464 100644 > --- a/.travis.yml > +++ b/.travis.yml > @@ -38,6 +38,7 @@ addons: > - libvte-2.90-dev > - sparse > - uuid-dev > + - gcovr > > # The channel name "irc.oftc.net#qemu" is encrypted against qemu/qemu > # to prevent IRC notifications from forks. This was created using: > @@ -81,6 +82,8 @@ matrix: > compiler: clang > # gprof/gcov are GCC features > - env: CONFIG="--enable-gprof --enable-gcov --disable-pie --target-list=aarch64-softmmu,arm-softmmu,i386-softmmu,mips-softmmu,mips64-softmmu,ppc64-softmmu,riscv64-softmmu,s390x-softmmu,x86_64-softmmu" I just noticed the linux-user tests are not covered. I'd duplicate this entry and use --disable-system --disable-bsd-user. > + after_success: > + - gcovr -p | grep -v "0%" | sed s/[0-9]\*[,-]//g > compiler: gcc > # We manually include builds which we disable "make check" for > - env: CONFIG="--enable-debug --enable-tcg-interpreter" >
Philippe Mathieu-Daudé <f4bug@amsat.org> writes: > On 06/20/2018 10:20 AM, Alex Bennée wrote: >> This gives a more useful summary, sorted by descending % coverage, >> after the tests have run. The final numbers will give an idea if our >> coverage is getting better or worse. >> >> As quite a lot of lines don't get covered at all we filter out all the >> 0% lines. If the file doesn't appear it is not being exercised. >> >> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> >> --- >> .travis.yml | 3 +++ >> 1 file changed, 3 insertions(+) >> >> diff --git a/.travis.yml b/.travis.yml >> index fabfe9ec34..83e0577464 100644 >> --- a/.travis.yml >> +++ b/.travis.yml >> @@ -38,6 +38,7 @@ addons: >> - libvte-2.90-dev >> - sparse >> - uuid-dev >> + - gcovr >> >> # The channel name "irc.oftc.net#qemu" is encrypted against qemu/qemu >> # to prevent IRC notifications from forks. This was created using: >> @@ -81,6 +82,8 @@ matrix: >> compiler: clang >> # gprof/gcov are GCC features >> - env: CONFIG="--enable-gprof --enable-gcov --disable-pie --target-list=aarch64-softmmu,arm-softmmu,i386-softmmu,mips-softmmu,mips64-softmmu,ppc64-softmmu,riscv64-softmmu,s390x-softmmu,x86_64-softmmu" > > I just noticed the linux-user tests are not covered. I did try and calculate coverage of a risu run through SVE and didn't get any gcda files so I think there is something else that needs adding first. > > I'd duplicate this entry and use --disable-system --disable-bsd-user. > >> + after_success: >> + - gcovr -p | grep -v "0%" | sed s/[0-9]\*[,-]//g >> compiler: gcc >> # We manually include builds which we disable "make check" for >> - env: CONFIG="--enable-debug --enable-tcg-interpreter" >> -- Alex Bennée
diff --git a/.travis.yml b/.travis.yml index fabfe9ec34..83e0577464 100644 --- a/.travis.yml +++ b/.travis.yml @@ -38,6 +38,7 @@ addons: - libvte-2.90-dev - sparse - uuid-dev + - gcovr # The channel name "irc.oftc.net#qemu" is encrypted against qemu/qemu # to prevent IRC notifications from forks. This was created using: @@ -81,6 +82,8 @@ matrix: compiler: clang # gprof/gcov are GCC features - env: CONFIG="--enable-gprof --enable-gcov --disable-pie --target-list=aarch64-softmmu,arm-softmmu,i386-softmmu,mips-softmmu,mips64-softmmu,ppc64-softmmu,riscv64-softmmu,s390x-softmmu,x86_64-softmmu" + after_success: + - gcovr -p | grep -v "0%" | sed s/[0-9]\*[,-]//g compiler: gcc # We manually include builds which we disable "make check" for - env: CONFIG="--enable-debug --enable-tcg-interpreter"
This gives a more useful summary, sorted by descending % coverage, after the tests have run. The final numbers will give an idea if our coverage is getting better or worse. As quite a lot of lines don't get covered at all we filter out all the 0% lines. If the file doesn't appear it is not being exercised. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> --- .travis.yml | 3 +++ 1 file changed, 3 insertions(+) -- 2.17.1