diff mbox series

[V2,5/7] mmc: sdhci: add CMD23 support for v4 mode

Message ID 1529028255-6022-6-git-send-email-zhang.chunyan@linaro.org
State New
Headers show
Series None | expand

Commit Message

Chunyan Zhang June 15, 2018, 2:04 a.m. UTC 
Host Driver Version 4.10 adds a new bit in Host Control 2 Register
for selecting Auto CMD23 or Auto CMD12 for ADMA3 data transfer.

Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>

---
 drivers/mmc/host/sdhci.c | 16 +++++++++++++++-
 drivers/mmc/host/sdhci.h |  1 +
 2 files changed, 16 insertions(+), 1 deletion(-)

-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Adrian Hunter June 22, 2018, 7:40 p.m. UTC | #1 
On 06/15/2018 05:04 AM, Chunyan Zhang wrote:
> Host Driver Version 4.10 adds a new bit in Host Control 2 Register

> for selecting Auto CMD23 or Auto CMD12 for ADMA3 data transfer.


We don't support ADMA3.  It would require changes to the block driver.
So is this change needed?

> 

> Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>

> ---

>  drivers/mmc/host/sdhci.c | 16 +++++++++++++++-

>  drivers/mmc/host/sdhci.h |  1 +

>  2 files changed, 16 insertions(+), 1 deletion(-)

> 

> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c

> index b8ee124..3b2af7e 100644

> --- a/drivers/mmc/host/sdhci.c

> +++ b/drivers/mmc/host/sdhci.c

> @@ -954,6 +954,20 @@ static inline bool sdhci_auto_cmd12(struct sdhci_host *host,

>  	       !mrq->cap_cmd_during_tfr;

>  }

>  

> +static inline void sdhci_set_auto_cmd23(struct sdhci_host *host,

> +					struct mmc_command *cmd)

> +{

> +	u16 ctrl2;

> +

> +	if (host->v4_mode) {


Isn't this only for a V4.1 controller, and doesn't the mode have to be "Auto
Cmd Auto Select"?


> +		ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);

> +		ctrl2 |= SDHCI_CMD23_ENABLE;

> +		sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2);

> +	} else {

> +		sdhci_writel(host, cmd->mrq->sbc->arg, SDHCI_ARGUMENT2);

> +	}

> +}

> +

>  static void sdhci_set_transfer_mode(struct sdhci_host *host,

>  	struct mmc_command *cmd)

>  {

> @@ -989,7 +1003,7 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host,

>  			mode |= SDHCI_TRNS_AUTO_CMD12;

>  		else if (cmd->mrq->sbc && (host->flags & SDHCI_AUTO_CMD23)) {

>  			mode |= SDHCI_TRNS_AUTO_CMD23;

> -			sdhci_writel(host, cmd->mrq->sbc->arg, SDHCI_ARGUMENT2);

> +			sdhci_set_auto_cmd23(host, cmd);

>  		}

>  	}

>  

> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h

> index 1e84539..d5e1c10 100644

> --- a/drivers/mmc/host/sdhci.h

> +++ b/drivers/mmc/host/sdhci.h

> @@ -185,6 +185,7 @@

>  #define   SDHCI_CTRL_DRV_TYPE_D		0x0030

>  #define  SDHCI_CTRL_EXEC_TUNING		0x0040

>  #define  SDHCI_CTRL_TUNED_CLK		0x0080

> +#define  SDHCI_CMD23_ENABLE		0x0800

>  #define  SDHCI_CTRL_V4_MODE		0x1000

>  #define  SDHCI_CTRL_64BIT_ADDR		0x2000

>  #define  SDHCI_CTRL_PRESET_VAL_ENABLE	0x8000

> 


--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Chunyan Zhang July 4, 2018, 3:03 a.m. UTC | #2 
On 23 June 2018 at 03:40, Adrian Hunter <adrian.hunter@intel.com> wrote:
> On 06/15/2018 05:04 AM, Chunyan Zhang wrote:

>> Host Driver Version 4.10 adds a new bit in Host Control 2 Register

>> for selecting Auto CMD23 or Auto CMD12 for ADMA3 data transfer.

>

> We don't support ADMA3.  It would require changes to the block driver.

> So is this change needed?

>

>>

>> Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>

>> ---

>>  drivers/mmc/host/sdhci.c | 16 +++++++++++++++-

>>  drivers/mmc/host/sdhci.h |  1 +

>>  2 files changed, 16 insertions(+), 1 deletion(-)

>>

>> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c

>> index b8ee124..3b2af7e 100644

>> --- a/drivers/mmc/host/sdhci.c

>> +++ b/drivers/mmc/host/sdhci.c

>> @@ -954,6 +954,20 @@ static inline bool sdhci_auto_cmd12(struct sdhci_host *host,

>>              !mrq->cap_cmd_during_tfr;

>>  }

>>

>> +static inline void sdhci_set_auto_cmd23(struct sdhci_host *host,

>> +                                     struct mmc_command *cmd)

>> +{

>> +     u16 ctrl2;

>> +

>> +     if (host->v4_mode) {

>

> Isn't this only for a V4.1 controller, and doesn't the mode have to be "Auto

> Cmd Auto Select"?


I will send another version of changes for this new mode "Auto Cmd
Auto Select", let's see if the next iteration gets better then.

Thanks for your review,
Chunyan

>

>

>> +             ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);

>> +             ctrl2 |= SDHCI_CMD23_ENABLE;

>> +             sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2);

>> +     } else {

>> +             sdhci_writel(host, cmd->mrq->sbc->arg, SDHCI_ARGUMENT2);

>> +     }

>> +}

>> +

>>  static void sdhci_set_transfer_mode(struct sdhci_host *host,

>>       struct mmc_command *cmd)

>>  {

>> @@ -989,7 +1003,7 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host,

>>                       mode |= SDHCI_TRNS_AUTO_CMD12;

>>               else if (cmd->mrq->sbc && (host->flags & SDHCI_AUTO_CMD23)) {

>>                       mode |= SDHCI_TRNS_AUTO_CMD23;

>> -                     sdhci_writel(host, cmd->mrq->sbc->arg, SDHCI_ARGUMENT2);

>> +                     sdhci_set_auto_cmd23(host, cmd);

>>               }

>>       }

>>

>> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h

>> index 1e84539..d5e1c10 100644

>> --- a/drivers/mmc/host/sdhci.h

>> +++ b/drivers/mmc/host/sdhci.h

>> @@ -185,6 +185,7 @@

>>  #define   SDHCI_CTRL_DRV_TYPE_D              0x0030

>>  #define  SDHCI_CTRL_EXEC_TUNING              0x0040

>>  #define  SDHCI_CTRL_TUNED_CLK                0x0080

>> +#define  SDHCI_CMD23_ENABLE          0x0800

>>  #define  SDHCI_CTRL_V4_MODE          0x1000

>>  #define  SDHCI_CTRL_64BIT_ADDR               0x2000

>>  #define  SDHCI_CTRL_PRESET_VAL_ENABLE        0x8000

>>

>

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox series

Patch

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index b8ee124..3b2af7e 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -954,6 +954,20 @@  static inline bool sdhci_auto_cmd12(struct sdhci_host *host,
 	       !mrq->cap_cmd_during_tfr;
 }
 
+static inline void sdhci_set_auto_cmd23(struct sdhci_host *host,
+					struct mmc_command *cmd)
+{
+	u16 ctrl2;
+
+	if (host->v4_mode) {
+		ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+		ctrl2 |= SDHCI_CMD23_ENABLE;
+		sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2);
+	} else {
+		sdhci_writel(host, cmd->mrq->sbc->arg, SDHCI_ARGUMENT2);
+	}
+}
+
 static void sdhci_set_transfer_mode(struct sdhci_host *host,
 	struct mmc_command *cmd)
 {
@@ -989,7 +1003,7 @@  static void sdhci_set_transfer_mode(struct sdhci_host *host,
 			mode |= SDHCI_TRNS_AUTO_CMD12;
 		else if (cmd->mrq->sbc && (host->flags & SDHCI_AUTO_CMD23)) {
 			mode |= SDHCI_TRNS_AUTO_CMD23;
-			sdhci_writel(host, cmd->mrq->sbc->arg, SDHCI_ARGUMENT2);
+			sdhci_set_auto_cmd23(host, cmd);
 		}
 	}
 
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 1e84539..d5e1c10 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -185,6 +185,7 @@ 
 #define   SDHCI_CTRL_DRV_TYPE_D		0x0030
 #define  SDHCI_CTRL_EXEC_TUNING		0x0040
 #define  SDHCI_CTRL_TUNED_CLK		0x0080
+#define  SDHCI_CMD23_ENABLE		0x0800
 #define  SDHCI_CTRL_V4_MODE		0x1000
 #define  SDHCI_CTRL_64BIT_ADDR		0x2000
 #define  SDHCI_CTRL_PRESET_VAL_ENABLE	0x8000