diff mbox series

[v3,6/6] iommu/arm-smmu-v3: add bootup option "iommu_strict_mode"

Message ID 1531376312-2192-7-git-send-email-thunder.leizhen@huawei.com
State New
Headers show
Series add non-strict mode support for arm-smmu-v3 | expand

Commit Message

Leizhen (ThunderTown) July 12, 2018, 6:18 a.m. UTC
Because the non-strict mode introduces a vulnerability window, so add a
bootup option to make the manager can choose which mode to be used. The
default mode is IOMMU_STRICT.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>

---
 Documentation/admin-guide/kernel-parameters.txt | 12 ++++++++++
 drivers/iommu/arm-smmu-v3.c                     | 32 ++++++++++++++++++++++---
 2 files changed, 41 insertions(+), 3 deletions(-)

-- 
1.8.3

Comments

Robin Murphy July 24, 2018, 10:46 p.m. UTC | #1
On 2018-07-12 7:18 AM, Zhen Lei wrote:
> Because the non-strict mode introduces a vulnerability window, so add a

> bootup option to make the manager can choose which mode to be used. The

> default mode is IOMMU_STRICT.

> 

> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>

> ---

>   Documentation/admin-guide/kernel-parameters.txt | 12 ++++++++++

>   drivers/iommu/arm-smmu-v3.c                     | 32 ++++++++++++++++++++++---

>   2 files changed, 41 insertions(+), 3 deletions(-)

> 

> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt

> index efc7aa7..0cc80bc 100644

> --- a/Documentation/admin-guide/kernel-parameters.txt

> +++ b/Documentation/admin-guide/kernel-parameters.txt

> @@ -1720,6 +1720,18 @@

>   		nobypass	[PPC/POWERNV]

>   			Disable IOMMU bypass, using IOMMU for PCI devices.

>   

> +	iommu_strict_mode=	[arm-smmu-v3]


If anything this should belong to iommu-dma, as that's where the actual 
decision of whether to use a flush queue or not happens. Also it would 
be nice to stick to the iommu.* option namespace in the hope of 
maintaining some consistency.

> +		0 - strict mode

> +		    Make sure all related TLBs to be invalidated before the

> +		    memory released.

> +		1 - non-strict mode

> +		    Put off TLBs invalidation and release memory first. This mode

> +		    introduces a vlunerability window, an untrusted device can

> +		    access the reused memory because the TLBs may still valid.

> +		    Please take full consideration before choosing this mode.

> +		    Note that, VFIO is always use strict mode.

> +		others - strict mode

> +

>   	iommu.passthrough=

>   			[ARM64] Configure DMA to bypass the IOMMU by default.

>   			Format: { "0" | "1" }

> diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c

> index 4a198a0..9b72fc4 100644

> --- a/drivers/iommu/arm-smmu-v3.c

> +++ b/drivers/iommu/arm-smmu-v3.c

> @@ -631,6 +631,24 @@ struct arm_smmu_option_prop {

>   	{ 0, NULL},

>   };

>   

> +static u32 iommu_strict_mode __read_mostly = IOMMU_STRICT;

> +

> +static int __init setup_iommu_strict_mode(char *str)

> +{

> +	u32 strict_mode = IOMMU_STRICT;

> +

> +	get_option(&str, &strict_mode);

> +	if (strict_mode == IOMMU_NON_STRICT) {

> +		iommu_strict_mode = strict_mode;

> +		pr_warn("WARNING: iommu non-strict mode is chose.\n"

> +			"It's good for scatter-gather performance but lacks full isolation\n");

> +		add_taint(TAINT_WARN, LOCKDEP_STILL_OK);

> +	}

> +

> +	return 0;

> +}

> +early_param("iommu_strict_mode", setup_iommu_strict_mode);

> +

>   static inline void __iomem *arm_smmu_page1_fixup(unsigned long offset,

>   						 struct arm_smmu_device *smmu)

>   {

> @@ -1441,7 +1459,7 @@ static bool arm_smmu_capable(enum iommu_cap cap)

>   	case IOMMU_CAP_NOEXEC:

>   		return true;

>   	case IOMMU_CAP_NON_STRICT:

> -		return true;

> +		return (iommu_strict_mode == IOMMU_NON_STRICT) ? true : false;


Ugh. The "completely redundant ternany" idiom hurts my soul :(

Robin.

>   	default:

>   		return false;

>   	}

> @@ -1750,6 +1768,14 @@ static int arm_smmu_attach_dev(struct iommu_domain *domain, struct device *dev)

>   	return ret;

>   }

>   

> +static u32 arm_smmu_strict_mode(struct iommu_domain *domain)

> +{

> +	if (iommu_strict_mode == IOMMU_NON_STRICT)

> +		return IOMMU_DOMAIN_STRICT_MODE(domain);

> +

> +	return IOMMU_STRICT;

> +}

> +

>   static int arm_smmu_map(struct iommu_domain *domain, unsigned long iova,

>   			phys_addr_t paddr, size_t size, int prot)

>   {

> @@ -1769,7 +1795,7 @@ static int arm_smmu_map(struct iommu_domain *domain, unsigned long iova,

>   	if (!ops)

>   		return 0;

>   

> -	return ops->unmap(ops, iova | IOMMU_DOMAIN_STRICT_MODE(domain), size);

> +	return ops->unmap(ops, iova | arm_smmu_strict_mode(domain), size);

>   }

>   

>   static void arm_smmu_flush_iotlb_all(struct iommu_domain *domain)

> @@ -1784,7 +1810,7 @@ static void arm_smmu_iotlb_sync(struct iommu_domain *domain)

>   {

>   	struct arm_smmu_device *smmu = to_smmu_domain(domain)->smmu;

>   

> -	if (smmu && (IOMMU_DOMAIN_STRICT_MODE(domain) == IOMMU_STRICT))

> +	if (smmu && (arm_smmu_strict_mode(domain) == IOMMU_STRICT))

>   		__arm_smmu_tlb_sync(smmu);

>   }

>   

>
Leizhen (ThunderTown) July 26, 2018, 7:41 a.m. UTC | #2
On 2018/7/25 6:46, Robin Murphy wrote:
> On 2018-07-12 7:18 AM, Zhen Lei wrote:

>> Because the non-strict mode introduces a vulnerability window, so add a

>> bootup option to make the manager can choose which mode to be used. The

>> default mode is IOMMU_STRICT.

>>

>> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>

>> ---

>>   Documentation/admin-guide/kernel-parameters.txt | 12 ++++++++++

>>   drivers/iommu/arm-smmu-v3.c                     | 32 ++++++++++++++++++++++---

>>   2 files changed, 41 insertions(+), 3 deletions(-)

>>

>> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt

>> index efc7aa7..0cc80bc 100644

>> --- a/Documentation/admin-guide/kernel-parameters.txt

>> +++ b/Documentation/admin-guide/kernel-parameters.txt

>> @@ -1720,6 +1720,18 @@

>>           nobypass    [PPC/POWERNV]

>>               Disable IOMMU bypass, using IOMMU for PCI devices.

>>   +    iommu_strict_mode=    [arm-smmu-v3]

> 

> If anything this should belong to iommu-dma, as that's where the actual decision of whether to use a flush queue or not happens. Also it would be nice to stick to the iommu.* option namespace in the hope of maintaining some consistency.


How about arm_iommu? like "s390_iommu" and "intel_iommu". After all it only affect smmu now.

> 

>> +        0 - strict mode

>> +            Make sure all related TLBs to be invalidated before the

>> +            memory released.

>> +        1 - non-strict mode

>> +            Put off TLBs invalidation and release memory first. This mode

>> +            introduces a vlunerability window, an untrusted device can

>> +            access the reused memory because the TLBs may still valid.

>> +            Please take full consideration before choosing this mode.

>> +            Note that, VFIO is always use strict mode.

>> +        others - strict mode

>> +

>>       iommu.passthrough=

>>               [ARM64] Configure DMA to bypass the IOMMU by default.

>>               Format: { "0" | "1" }

>> diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c

>> index 4a198a0..9b72fc4 100644

>> --- a/drivers/iommu/arm-smmu-v3.c

>> +++ b/drivers/iommu/arm-smmu-v3.c

>> @@ -631,6 +631,24 @@ struct arm_smmu_option_prop {

>>       { 0, NULL},

>>   };

>>   +static u32 iommu_strict_mode __read_mostly = IOMMU_STRICT;

>> +

>> +static int __init setup_iommu_strict_mode(char *str)

>> +{

>> +    u32 strict_mode = IOMMU_STRICT;

>> +

>> +    get_option(&str, &strict_mode);

>> +    if (strict_mode == IOMMU_NON_STRICT) {

>> +        iommu_strict_mode = strict_mode;

>> +        pr_warn("WARNING: iommu non-strict mode is chose.\n"

>> +            "It's good for scatter-gather performance but lacks full isolation\n");

>> +        add_taint(TAINT_WARN, LOCKDEP_STILL_OK);

>> +    }

>> +

>> +    return 0;

>> +}

>> +early_param("iommu_strict_mode", setup_iommu_strict_mode);

>> +

>>   static inline void __iomem *arm_smmu_page1_fixup(unsigned long offset,

>>                            struct arm_smmu_device *smmu)

>>   {

>> @@ -1441,7 +1459,7 @@ static bool arm_smmu_capable(enum iommu_cap cap)

>>       case IOMMU_CAP_NOEXEC:

>>           return true;

>>       case IOMMU_CAP_NON_STRICT:

>> -        return true;

>> +        return (iommu_strict_mode == IOMMU_NON_STRICT) ? true : false;

> 

> Ugh. The "completely redundant ternany" idiom hurts my soul :(


OK, I will modify it.

> 

> Robin.

> 

>>       default:

>>           return false;

>>       }

>> @@ -1750,6 +1768,14 @@ static int arm_smmu_attach_dev(struct iommu_domain *domain, struct device *dev)

>>       return ret;

>>   }

>>   +static u32 arm_smmu_strict_mode(struct iommu_domain *domain)

>> +{

>> +    if (iommu_strict_mode == IOMMU_NON_STRICT)

>> +        return IOMMU_DOMAIN_STRICT_MODE(domain);

>> +

>> +    return IOMMU_STRICT;

>> +}

>> +

>>   static int arm_smmu_map(struct iommu_domain *domain, unsigned long iova,

>>               phys_addr_t paddr, size_t size, int prot)

>>   {

>> @@ -1769,7 +1795,7 @@ static int arm_smmu_map(struct iommu_domain *domain, unsigned long iova,

>>       if (!ops)

>>           return 0;

>>   -    return ops->unmap(ops, iova | IOMMU_DOMAIN_STRICT_MODE(domain), size);

>> +    return ops->unmap(ops, iova | arm_smmu_strict_mode(domain), size);

>>   }

>>     static void arm_smmu_flush_iotlb_all(struct iommu_domain *domain)

>> @@ -1784,7 +1810,7 @@ static void arm_smmu_iotlb_sync(struct iommu_domain *domain)

>>   {

>>       struct arm_smmu_device *smmu = to_smmu_domain(domain)->smmu;

>>   -    if (smmu && (IOMMU_DOMAIN_STRICT_MODE(domain) == IOMMU_STRICT))

>> +    if (smmu && (arm_smmu_strict_mode(domain) == IOMMU_STRICT))

>>           __arm_smmu_tlb_sync(smmu);

>>   }

>>  

> 

> .

> 


-- 
Thanks!
BestRegards
diff mbox series

Patch

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index efc7aa7..0cc80bc 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1720,6 +1720,18 @@ 
 		nobypass	[PPC/POWERNV]
 			Disable IOMMU bypass, using IOMMU for PCI devices.
 
+	iommu_strict_mode=	[arm-smmu-v3]
+		0 - strict mode
+		    Make sure all related TLBs to be invalidated before the
+		    memory released.
+		1 - non-strict mode
+		    Put off TLBs invalidation and release memory first. This mode
+		    introduces a vlunerability window, an untrusted device can
+		    access the reused memory because the TLBs may still valid.
+		    Please take full consideration before choosing this mode.
+		    Note that, VFIO is always use strict mode.
+		others - strict mode
+
 	iommu.passthrough=
 			[ARM64] Configure DMA to bypass the IOMMU by default.
 			Format: { "0" | "1" }
diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
index 4a198a0..9b72fc4 100644
--- a/drivers/iommu/arm-smmu-v3.c
+++ b/drivers/iommu/arm-smmu-v3.c
@@ -631,6 +631,24 @@  struct arm_smmu_option_prop {
 	{ 0, NULL},
 };
 
+static u32 iommu_strict_mode __read_mostly = IOMMU_STRICT;
+
+static int __init setup_iommu_strict_mode(char *str)
+{
+	u32 strict_mode = IOMMU_STRICT;
+
+	get_option(&str, &strict_mode);
+	if (strict_mode == IOMMU_NON_STRICT) {
+		iommu_strict_mode = strict_mode;
+		pr_warn("WARNING: iommu non-strict mode is chose.\n"
+			"It's good for scatter-gather performance but lacks full isolation\n");
+		add_taint(TAINT_WARN, LOCKDEP_STILL_OK);
+	}
+
+	return 0;
+}
+early_param("iommu_strict_mode", setup_iommu_strict_mode);
+
 static inline void __iomem *arm_smmu_page1_fixup(unsigned long offset,
 						 struct arm_smmu_device *smmu)
 {
@@ -1441,7 +1459,7 @@  static bool arm_smmu_capable(enum iommu_cap cap)
 	case IOMMU_CAP_NOEXEC:
 		return true;
 	case IOMMU_CAP_NON_STRICT:
-		return true;
+		return (iommu_strict_mode == IOMMU_NON_STRICT) ? true : false;
 	default:
 		return false;
 	}
@@ -1750,6 +1768,14 @@  static int arm_smmu_attach_dev(struct iommu_domain *domain, struct device *dev)
 	return ret;
 }
 
+static u32 arm_smmu_strict_mode(struct iommu_domain *domain)
+{
+	if (iommu_strict_mode == IOMMU_NON_STRICT)
+		return IOMMU_DOMAIN_STRICT_MODE(domain);
+
+	return IOMMU_STRICT;
+}
+
 static int arm_smmu_map(struct iommu_domain *domain, unsigned long iova,
 			phys_addr_t paddr, size_t size, int prot)
 {
@@ -1769,7 +1795,7 @@  static int arm_smmu_map(struct iommu_domain *domain, unsigned long iova,
 	if (!ops)
 		return 0;
 
-	return ops->unmap(ops, iova | IOMMU_DOMAIN_STRICT_MODE(domain), size);
+	return ops->unmap(ops, iova | arm_smmu_strict_mode(domain), size);
 }
 
 static void arm_smmu_flush_iotlb_all(struct iommu_domain *domain)
@@ -1784,7 +1810,7 @@  static void arm_smmu_iotlb_sync(struct iommu_domain *domain)
 {
 	struct arm_smmu_device *smmu = to_smmu_domain(domain)->smmu;
 
-	if (smmu && (IOMMU_DOMAIN_STRICT_MODE(domain) == IOMMU_STRICT))
+	if (smmu && (arm_smmu_strict_mode(domain) == IOMMU_STRICT))
 		__arm_smmu_tlb_sync(smmu);
 }