Message ID | 1533042142-8681-5-git-send-email-amit.pundir@linaro.org |
---|---|
State | New |
Headers | show |
Series | [for-4.14.y,1/5] mtd: nand: qcom: Add a NULL check for devm_kasprintf() | expand |
On Tue, Jul 31, 2018 at 06:32:21PM +0530, Amit Pundir wrote: > From: Oleksij Rempel <o.rempel@pengutronix.de> > > commit 1bcfe0564044be578841744faea1c2f46adc8178 upstream. > > Use the correct IRQ line for the MSI controller in the PCIe host > controller. Apparently a different IRQ line is used compared to other > i.MX6 variants. Without this change MSI IRQs aren't properly propagated > to the upstream interrupt controller. > > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> > Reviewed-by: Lucas Stach <l.stach@pengutronix.de> > Fixes: b1d17f68e5c5 ("ARM: dts: imx: add initial imx6sx device tree source") > Signed-off-by: Shawn Guo <shawnguo@kernel.org> > [AmitP: Rebased for Stable] > Signed-off-by: Amit Pundir <amit.pundir@linaro.org> > --- > Please cherry-pick it on 4.9.y, 4.4.y and 3.18.y as well. You forgot about 4.17 :)
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 6c7eb54be9e2..d64438bfa68b 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -1305,7 +1305,7 @@ 0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; bus-range = <0x00 0xff>; num-lanes = <1>; - interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_PCIE_REF_125M>, <&clks IMX6SX_CLK_PCIE_AXI>, <&clks IMX6SX_CLK_LVDS1_OUT>,