diff mbox series

[2/4] ARM: dts: omap4-droid4: Update backlight dt properties

Message ID 20190321142838.22985-2-dmurphy@ti.com
State New
Headers show
Series None | expand

Commit Message

Dan Murphy March 21, 2019, 2:28 p.m. UTC 
Update the properties for the lm3532 device node for droid4.
With this change the backlight LED string and the keypad
LED strings will be controlled separately.

Signed-off-by: Dan Murphy <dmurphy@ti.com>

---

v5 - No change - https://lore.kernel.org/patchwork/patch/1050409/

v4 - No change - https://lore.kernel.org/patchwork/patch/1050125/
v3 - updated keypad label on v1 comment - https://lore.kernel.org/patchwork/patch/1049023/
v2 - Fixed ramp-up and ramp-down properties, removed hard coded property values,
I did not change the label as it is undecided what it could be - https://lore.kernel.org/patchwork/patch/1048806/

 arch/arm/boot/dts/omap4-droid4-xt894.dts | 26 ++++++++++++++++--------
 1 file changed, 18 insertions(+), 8 deletions(-)

-- 
2.21.0.5.gaeb582a983

Comments

Tony Lindgren April 4, 2019, 12:03 a.m. UTC | #1 
Hi,

* Dan Murphy <dmurphy@ti.com> [190321 14:29]:
> Update the properties for the lm3532 device node for droid4.

> With this change the backlight LED string and the keypad

> LED strings will be controlled separately.


We also need the following incremental change to prevent
panel-dsi-cm trying to use of_find_backlight_by_node().
We have ledtrig-backlight use FB_EVENT_BLANK, and I
guess more events can be added there as needed.

There should be no dependency to the driver changes with
this patch, so it's probably best that I queue this dts
patch separately. I'll fold in the following change too
assuming no more comments.

Regards,

Tony

8< -----------------
diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -214,7 +214,6 @@
 
 		width-mm = <50>;
 		height-mm = <89>;
-		backlight = <&lcd_backlight>;
 
 		panel-timing {
 			clock-frequency = <0>;		/* Calculated by dsi */
Jacek Anaszewski April 4, 2019, 8:12 p.m. UTC | #2 
Tony,

On 3/21/19 3:28 PM, Dan Murphy wrote:
> Update the properties for the lm3532 device node for droid4.

> With this change the backlight LED string and the keypad

> LED strings will be controlled separately.

> 

> Signed-off-by: Dan Murphy <dmurphy@ti.com>

> ---

> 

> v5 - No change - https://lore.kernel.org/patchwork/patch/1050409/

> 

> v4 - No change - https://lore.kernel.org/patchwork/patch/1050125/

> v3 - updated keypad label on v1 comment - https://lore.kernel.org/patchwork/patch/1049023/

> v2 - Fixed ramp-up and ramp-down properties, removed hard coded property values,

> I did not change the label as it is undecided what it could be - https://lore.kernel.org/patchwork/patch/1048806/

> 

>   arch/arm/boot/dts/omap4-droid4-xt894.dts | 26 ++++++++++++++++--------

>   1 file changed, 18 insertions(+), 8 deletions(-)

> 

> diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts

> index e21ec929f096..aea206f04f76 100644

> --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts

> +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts

> @@ -383,20 +383,30 @@

>   };

>   

>   &i2c1 {

> -	lm3532@38 {

> +	led-controller@38 {

>   		compatible = "ti,lm3532";

> +		#address-cells = <1>;

> +		#size-cells = <0>;

>   		reg = <0x38>;

>   

>   		enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;

>   

> -		lcd_backlight: backlight {

> -			compatible = "ti,lm3532-backlight";

> +		ramp-up-us = <1024>;

> +		ramp-down-us = <8193>;

>   

> -			lcd {

> -				led-sources = <0 1 2>;

> -				ramp-up-msec = <1>;

> -				ramp-down-msec = <0>;

> -			};


Since I'll be creating integration branch for this series,
and it would be good to have this patch in it too, then
I can do the amendments by myself:

> +		lcd_backlight: led@0 {

> +			reg = <0>;

> +			led-sources = <2>;

> +			ti,led-mode = <0>;

> +			label = "backlight";


s/backlight/:backlight/

> +			linux,default-trigger = "backlight";

> +		};

> +

> +		led@1 {

> +			reg = <1>;

> +			led-sources = <1>;

> +			ti,led-mode = <0>;

> +			label = "platform::kbd_backlight";


s/platform::kbd_backlight/:kbd_backlight/

and then send you a pull request.

Would you be OK with that?

>   		};

>   	};

>   };

> 


-- 
Best regards,
Jacek Anaszewski
Tony Lindgren April 4, 2019, 10 p.m. UTC | #3 
* Jacek Anaszewski <jacek.anaszewski@gmail.com> [190404 20:12]:
> Tony,

> 

> On 3/21/19 3:28 PM, Dan Murphy wrote:

> > Update the properties for the lm3532 device node for droid4.

> > With this change the backlight LED string and the keypad

> > LED strings will be controlled separately.

> > 

> > Signed-off-by: Dan Murphy <dmurphy@ti.com>

> > ---

> > 

> > v5 - No change - https://lore.kernel.org/patchwork/patch/1050409/

> > 

> > v4 - No change - https://lore.kernel.org/patchwork/patch/1050125/

> > v3 - updated keypad label on v1 comment - https://lore.kernel.org/patchwork/patch/1049023/

> > v2 - Fixed ramp-up and ramp-down properties, removed hard coded property values,

> > I did not change the label as it is undecided what it could be - https://lore.kernel.org/patchwork/patch/1048806/

> > 

> >   arch/arm/boot/dts/omap4-droid4-xt894.dts | 26 ++++++++++++++++--------

> >   1 file changed, 18 insertions(+), 8 deletions(-)

> > 

> > diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts

> > index e21ec929f096..aea206f04f76 100644

> > --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts

> > +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts

> > @@ -383,20 +383,30 @@

> >   };

> >   &i2c1 {

> > -	lm3532@38 {

> > +	led-controller@38 {

> >   		compatible = "ti,lm3532";

> > +		#address-cells = <1>;

> > +		#size-cells = <0>;

> >   		reg = <0x38>;

> >   		enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;

> > -		lcd_backlight: backlight {

> > -			compatible = "ti,lm3532-backlight";

> > +		ramp-up-us = <1024>;

> > +		ramp-down-us = <8193>;

> > -			lcd {

> > -				led-sources = <0 1 2>;

> > -				ramp-up-msec = <1>;

> > -				ramp-down-msec = <0>;

> > -			};

> 

> Since I'll be creating integration branch for this series,

> and it would be good to have this patch in it too, then

> I can do the amendments by myself:

> 

> > +		lcd_backlight: led@0 {

> > +			reg = <0>;

> > +			led-sources = <2>;

> > +			ti,led-mode = <0>;

> > +			label = "backlight";

> 

> s/backlight/:backlight/

> 

> > +			linux,default-trigger = "backlight";

> > +		};

> > +

> > +		led@1 {

> > +			reg = <1>;

> > +			led-sources = <1>;

> > +			ti,led-mode = <0>;

> > +			label = "platform::kbd_backlight";

> 

> s/platform::kbd_backlight/:kbd_backlight/


Yes makes sense to me.

> and then send you a pull request.

> 

> Would you be OK with that?


Sure go for it. Here's my ack for the changes:

Acked-by: Tony Lindgren <tony@atomide.com>


And then for the one liner to fold in below:

Signed-off-by: Tony Lindgren <tony@atomide.com>


8< -------------
diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -214,7 +214,6 @@
 
 		width-mm = <50>;
 		height-mm = <89>;
-		backlight = <&lcd_backlight>;
 
 		panel-timing {
 			clock-frequency = <0>;		/* Calculated by dsi */
Jacek Anaszewski April 7, 2019, 6:31 p.m. UTC | #4 
On 4/5/19 12:00 AM, Tony Lindgren wrote:
> * Jacek Anaszewski <jacek.anaszewski@gmail.com> [190404 20:12]:

>> Tony,

>>

>> On 3/21/19 3:28 PM, Dan Murphy wrote:

>>> Update the properties for the lm3532 device node for droid4.

>>> With this change the backlight LED string and the keypad

>>> LED strings will be controlled separately.

>>>

>>> Signed-off-by: Dan Murphy <dmurphy@ti.com>

>>> ---

>>>

>>> v5 - No change - https://lore.kernel.org/patchwork/patch/1050409/

>>>

>>> v4 - No change - https://lore.kernel.org/patchwork/patch/1050125/

>>> v3 - updated keypad label on v1 comment - https://lore.kernel.org/patchwork/patch/1049023/

>>> v2 - Fixed ramp-up and ramp-down properties, removed hard coded property values,

>>> I did not change the label as it is undecided what it could be - https://lore.kernel.org/patchwork/patch/1048806/

>>>

>>>    arch/arm/boot/dts/omap4-droid4-xt894.dts | 26 ++++++++++++++++--------

>>>    1 file changed, 18 insertions(+), 8 deletions(-)

>>>

>>> diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts

>>> index e21ec929f096..aea206f04f76 100644

>>> --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts

>>> +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts

>>> @@ -383,20 +383,30 @@

>>>    };

>>>    &i2c1 {

>>> -	lm3532@38 {

>>> +	led-controller@38 {

>>>    		compatible = "ti,lm3532";

>>> +		#address-cells = <1>;

>>> +		#size-cells = <0>;

>>>    		reg = <0x38>;

>>>    		enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;

>>> -		lcd_backlight: backlight {

>>> -			compatible = "ti,lm3532-backlight";

>>> +		ramp-up-us = <1024>;

>>> +		ramp-down-us = <8193>;

>>> -			lcd {

>>> -				led-sources = <0 1 2>;

>>> -				ramp-up-msec = <1>;

>>> -				ramp-down-msec = <0>;

>>> -			};

>>

>> Since I'll be creating integration branch for this series,

>> and it would be good to have this patch in it too, then

>> I can do the amendments by myself:

>>

>>> +		lcd_backlight: led@0 {

>>> +			reg = <0>;

>>> +			led-sources = <2>;

>>> +			ti,led-mode = <0>;

>>> +			label = "backlight";

>>

>> s/backlight/:backlight/

>>

>>> +			linux,default-trigger = "backlight";

>>> +		};

>>> +

>>> +		led@1 {

>>> +			reg = <1>;

>>> +			led-sources = <1>;

>>> +			ti,led-mode = <0>;

>>> +			label = "platform::kbd_backlight";

>>

>> s/platform::kbd_backlight/:kbd_backlight/

> 

> Yes makes sense to me.

> 

>> and then send you a pull request.

>>

>> Would you be OK with that?

> 

> Sure go for it. Here's my ack for the changes:

> 

> Acked-by: Tony Lindgren <tony@atomide.com>

> 

> And then for the one liner to fold in below:

> 

> Signed-off-by: Tony Lindgren <tony@atomide.com>

> 

> 8< -------------

> diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts

> --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts

> +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts

> @@ -214,7 +214,6 @@

>   

>   		width-mm = <50>;

>   		height-mm = <89>;

> -		backlight = <&lcd_backlight>;

>   

>   		panel-timing {

>   			clock-frequency = <0>;		/* Calculated by dsi */

> 


Folded in, thanks. Beside that, I also removed lcd_backlight DT
labels from both DT bindings and dts, since it is now unused
and misleading.

-- 
Best regards,
Jacek Anaszewski
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
index e21ec929f096..aea206f04f76 100644
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -383,20 +383,30 @@ 
 };
 
 &i2c1 {
-	lm3532@38 {
+	led-controller@38 {
 		compatible = "ti,lm3532";
+		#address-cells = <1>;
+		#size-cells = <0>;
 		reg = <0x38>;
 
 		enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
 
-		lcd_backlight: backlight {
-			compatible = "ti,lm3532-backlight";
+		ramp-up-us = <1024>;
+		ramp-down-us = <8193>;
 
-			lcd {
-				led-sources = <0 1 2>;
-				ramp-up-msec = <1>;
-				ramp-down-msec = <0>;
-			};
+		lcd_backlight: led@0 {
+			reg = <0>;
+			led-sources = <2>;
+			ti,led-mode = <0>;
+			label = "backlight";
+			linux,default-trigger = "backlight";
+		};
+
+		led@1 {
+			reg = <1>;
+			led-sources = <1>;
+			ti,led-mode = <0>;
+			label = "platform::kbd_backlight";
 		};
 	};
 };