| Message ID | 20190924153356.24103-7-jbrunet@baylibre.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | clk: meson: axg-audio: add sm1 support | expand |
On 24/09/2019 17:33, Jerome Brunet wrote: > The peripheral clock on the sm1 goes through some muxes > and dividers before reaching the audio gates. To model that, > without repeating our self too much, the "top" clock signal > is introduced and will serve as a the parent of the gates. > > On the axg and g12a, the top clock is just a pass-through to > the audio peripheral clock provided by the main controller. > > Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> > --- > drivers/clk/meson/axg-audio.c | 19 ++++++++++++++++--- > drivers/clk/meson/axg-audio.h | 3 ++- > 2 files changed, 18 insertions(+), 4 deletions(-) > > diff --git a/drivers/clk/meson/axg-audio.c b/drivers/clk/meson/axg-audio.c > index ce8836776d1c..a8ccdbaecae2 100644 > --- a/drivers/clk/meson/axg-audio.c > +++ b/drivers/clk/meson/axg-audio.c > @@ -74,9 +74,7 @@ > .hw.init = &(struct clk_init_data) { \ > .name = "aud_"#_name, \ > .ops = &clk_regmap_gate_ops, \ > - .parent_data = &(const struct clk_parent_data) { \ > - .fw_name = "pclk", \ > - }, \ > + .parent_names = (const char *[]){ "aud_top" }, \ > .num_parents = 1, \ > }, \ > } > @@ -504,6 +502,19 @@ static struct clk_regmap tdmout_c_lrclk = > AUD_TDM_LRLCK(out_c, AUDIO_CLK_TDMOUT_C_CTRL); > > /* AXG/G12A Clocks */ > + > +static struct clk_hw axg_aud_top = { > + .init = &(struct clk_init_data) { > + /* Provide aud_top signal name on axg and g12a */ > + .name = "aud_top", > + .ops = &(const struct clk_ops) {}, > + .parent_data = &(const struct clk_parent_data) { > + .fw_name = "pclk", > + }, > + .num_parents = 1, > + }, > +}; > + > static struct clk_regmap mst_a_mclk_sel = > AUD_MST_MCLK_MUX(mst_a_mclk, AUDIO_MCLK_A_CTRL); > static struct clk_regmap mst_b_mclk_sel = > @@ -691,6 +702,7 @@ static struct clk_hw_onecell_data axg_audio_hw_onecell_data = { > [AUD_CLKID_TDMOUT_A_LRCLK] = &tdmout_a_lrclk.hw, > [AUD_CLKID_TDMOUT_B_LRCLK] = &tdmout_b_lrclk.hw, > [AUD_CLKID_TDMOUT_C_LRCLK] = &tdmout_c_lrclk.hw, > + [AUD_CLKID_TOP] = &axg_aud_top, > [NR_CLKS] = NULL, > }, > .num = NR_CLKS, > @@ -835,6 +847,7 @@ static struct clk_hw_onecell_data g12a_audio_hw_onecell_data = { > [AUD_CLKID_TDM_SCLK_PAD0] = &g12a_tdm_sclk_pad_0.hw, > [AUD_CLKID_TDM_SCLK_PAD1] = &g12a_tdm_sclk_pad_1.hw, > [AUD_CLKID_TDM_SCLK_PAD2] = &g12a_tdm_sclk_pad_2.hw, > + [AUD_CLKID_TOP] = &axg_aud_top, > [NR_CLKS] = NULL, > }, > .num = NR_CLKS, > diff --git a/drivers/clk/meson/axg-audio.h b/drivers/clk/meson/axg-audio.h > index c00e28b2e1a9..a4956837f597 100644 > --- a/drivers/clk/meson/axg-audio.h > +++ b/drivers/clk/meson/axg-audio.h > @@ -116,9 +116,10 @@ > #define AUD_CLKID_SPDIFOUT_B_CLK_SEL 153 > #define AUD_CLKID_SPDIFOUT_B_CLK_DIV 154 > > + AUD_CLKID_TOP seems to be missing here > /* include the CLKIDs which are part of the DT bindings */ > #include <dt-bindings/clock/axg-audio-clkc.h> > > -#define NR_CLKS 163 > +#define NR_CLKS 164 > > #endif /*__AXG_AUDIO_CLKC_H */ >
On 27/09/2019 11:14, Neil Armstrong wrote: > On 24/09/2019 17:33, Jerome Brunet wrote: >> The peripheral clock on the sm1 goes through some muxes >> and dividers before reaching the audio gates. To model that, >> without repeating our self too much, the "top" clock signal >> is introduced and will serve as a the parent of the gates. >> >> On the axg and g12a, the top clock is just a pass-through to >> the audio peripheral clock provided by the main controller. >> >> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> >> --- >> drivers/clk/meson/axg-audio.c | 19 ++++++++++++++++--- >> drivers/clk/meson/axg-audio.h | 3 ++- >> 2 files changed, 18 insertions(+), 4 deletions(-) >> >> diff --git a/drivers/clk/meson/axg-audio.c b/drivers/clk/meson/axg-audio.c >> index ce8836776d1c..a8ccdbaecae2 100644 >> --- a/drivers/clk/meson/axg-audio.c >> +++ b/drivers/clk/meson/axg-audio.c >> @@ -74,9 +74,7 @@ >> .hw.init = &(struct clk_init_data) { \ >> .name = "aud_"#_name, \ >> .ops = &clk_regmap_gate_ops, \ >> - .parent_data = &(const struct clk_parent_data) { \ >> - .fw_name = "pclk", \ >> - }, \ >> + .parent_names = (const char *[]){ "aud_top" }, \ >> .num_parents = 1, \ >> }, \ >> } >> @@ -504,6 +502,19 @@ static struct clk_regmap tdmout_c_lrclk = >> AUD_TDM_LRLCK(out_c, AUDIO_CLK_TDMOUT_C_CTRL); >> >> /* AXG/G12A Clocks */ >> + >> +static struct clk_hw axg_aud_top = { >> + .init = &(struct clk_init_data) { >> + /* Provide aud_top signal name on axg and g12a */ >> + .name = "aud_top", >> + .ops = &(const struct clk_ops) {}, >> + .parent_data = &(const struct clk_parent_data) { >> + .fw_name = "pclk", >> + }, >> + .num_parents = 1, >> + }, >> +}; >> + >> static struct clk_regmap mst_a_mclk_sel = >> AUD_MST_MCLK_MUX(mst_a_mclk, AUDIO_MCLK_A_CTRL); >> static struct clk_regmap mst_b_mclk_sel = >> @@ -691,6 +702,7 @@ static struct clk_hw_onecell_data axg_audio_hw_onecell_data = { >> [AUD_CLKID_TDMOUT_A_LRCLK] = &tdmout_a_lrclk.hw, >> [AUD_CLKID_TDMOUT_B_LRCLK] = &tdmout_b_lrclk.hw, >> [AUD_CLKID_TDMOUT_C_LRCLK] = &tdmout_c_lrclk.hw, >> + [AUD_CLKID_TOP] = &axg_aud_top, >> [NR_CLKS] = NULL, >> }, >> .num = NR_CLKS, >> @@ -835,6 +847,7 @@ static struct clk_hw_onecell_data g12a_audio_hw_onecell_data = { >> [AUD_CLKID_TDM_SCLK_PAD0] = &g12a_tdm_sclk_pad_0.hw, >> [AUD_CLKID_TDM_SCLK_PAD1] = &g12a_tdm_sclk_pad_1.hw, >> [AUD_CLKID_TDM_SCLK_PAD2] = &g12a_tdm_sclk_pad_2.hw, >> + [AUD_CLKID_TOP] = &axg_aud_top, >> [NR_CLKS] = NULL, >> }, >> .num = NR_CLKS, >> diff --git a/drivers/clk/meson/axg-audio.h b/drivers/clk/meson/axg-audio.h >> index c00e28b2e1a9..a4956837f597 100644 >> --- a/drivers/clk/meson/axg-audio.h >> +++ b/drivers/clk/meson/axg-audio.h >> @@ -116,9 +116,10 @@ >> #define AUD_CLKID_SPDIFOUT_B_CLK_SEL 153 >> #define AUD_CLKID_SPDIFOUT_B_CLK_DIV 154 >> >> + > > AUD_CLKID_TOP seems to be missing here Oh, yes it was exposed, do you need to it to be exposed since it's dummy for G12A ? Neil > > >> /* include the CLKIDs which are part of the DT bindings */ >> #include <dt-bindings/clock/axg-audio-clkc.h> >> >> -#define NR_CLKS 163 >> +#define NR_CLKS 164 >> >> #endif /*__AXG_AUDIO_CLKC_H */ >> >
On Fri 27 Sep 2019 at 11:37, Neil Armstrong <narmstrong@baylibre.com> wrote: > On 27/09/2019 11:14, Neil Armstrong wrote: >> On 24/09/2019 17:33, Jerome Brunet wrote: >> [...] >> AUD_CLKID_TOP seems to be missing here > > Oh, yes it was exposed, do you need to it to be exposed since it's > dummy for G12A ? It is a bypass clock on g12a and axg yes, but on the sm1. It is the leaf of a block on sm1, for all I know it could be used outside the clock controller. Of course, I could wait this until there is an actual need for it if that is what you mean ? > > Neil > >> >> >>> /* include the CLKIDs which are part of the DT bindings */ >>> #include <dt-bindings/clock/axg-audio-clkc.h> >>> >>> -#define NR_CLKS 163 >>> +#define NR_CLKS 164 >>> >>> #endif /*__AXG_AUDIO_CLKC_H */ >>> >>
On 27/09/2019 15:58, Jerome Brunet wrote: > > On Fri 27 Sep 2019 at 11:37, Neil Armstrong <narmstrong@baylibre.com> wrote: > >> On 27/09/2019 11:14, Neil Armstrong wrote: >>> On 24/09/2019 17:33, Jerome Brunet wrote: >>> > > [...] > >>> AUD_CLKID_TOP seems to be missing here >> >> Oh, yes it was exposed, do you need to it to be exposed since it's >> dummy for G12A ? > > It is a bypass clock on g12a and axg yes, but on the sm1. > It is the leaf of a block on sm1, for all I know it could be used > outside the clock controller. > > Of course, I could wait this until there is an actual need for it if that is > what you mean ? Yes, but it's a valid clock on sm1, so leave it as it is. Neil > >> >> Neil >> >>> >>> >>>> /* include the CLKIDs which are part of the DT bindings */ >>>> #include <dt-bindings/clock/axg-audio-clkc.h> >>>> >>>> -#define NR_CLKS 163 >>>> +#define NR_CLKS 164 >>>> >>>> #endif /*__AXG_AUDIO_CLKC_H */ >>>> >>> >
diff --git a/drivers/clk/meson/axg-audio.c b/drivers/clk/meson/axg-audio.c index ce8836776d1c..a8ccdbaecae2 100644 --- a/drivers/clk/meson/axg-audio.c +++ b/drivers/clk/meson/axg-audio.c @@ -74,9 +74,7 @@ .hw.init = &(struct clk_init_data) { \ .name = "aud_"#_name, \ .ops = &clk_regmap_gate_ops, \ - .parent_data = &(const struct clk_parent_data) { \ - .fw_name = "pclk", \ - }, \ + .parent_names = (const char *[]){ "aud_top" }, \ .num_parents = 1, \ }, \ } @@ -504,6 +502,19 @@ static struct clk_regmap tdmout_c_lrclk = AUD_TDM_LRLCK(out_c, AUDIO_CLK_TDMOUT_C_CTRL); /* AXG/G12A Clocks */ + +static struct clk_hw axg_aud_top = { + .init = &(struct clk_init_data) { + /* Provide aud_top signal name on axg and g12a */ + .name = "aud_top", + .ops = &(const struct clk_ops) {}, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "pclk", + }, + .num_parents = 1, + }, +}; + static struct clk_regmap mst_a_mclk_sel = AUD_MST_MCLK_MUX(mst_a_mclk, AUDIO_MCLK_A_CTRL); static struct clk_regmap mst_b_mclk_sel = @@ -691,6 +702,7 @@ static struct clk_hw_onecell_data axg_audio_hw_onecell_data = { [AUD_CLKID_TDMOUT_A_LRCLK] = &tdmout_a_lrclk.hw, [AUD_CLKID_TDMOUT_B_LRCLK] = &tdmout_b_lrclk.hw, [AUD_CLKID_TDMOUT_C_LRCLK] = &tdmout_c_lrclk.hw, + [AUD_CLKID_TOP] = &axg_aud_top, [NR_CLKS] = NULL, }, .num = NR_CLKS, @@ -835,6 +847,7 @@ static struct clk_hw_onecell_data g12a_audio_hw_onecell_data = { [AUD_CLKID_TDM_SCLK_PAD0] = &g12a_tdm_sclk_pad_0.hw, [AUD_CLKID_TDM_SCLK_PAD1] = &g12a_tdm_sclk_pad_1.hw, [AUD_CLKID_TDM_SCLK_PAD2] = &g12a_tdm_sclk_pad_2.hw, + [AUD_CLKID_TOP] = &axg_aud_top, [NR_CLKS] = NULL, }, .num = NR_CLKS, diff --git a/drivers/clk/meson/axg-audio.h b/drivers/clk/meson/axg-audio.h index c00e28b2e1a9..a4956837f597 100644 --- a/drivers/clk/meson/axg-audio.h +++ b/drivers/clk/meson/axg-audio.h @@ -116,9 +116,10 @@ #define AUD_CLKID_SPDIFOUT_B_CLK_SEL 153 #define AUD_CLKID_SPDIFOUT_B_CLK_DIV 154 + /* include the CLKIDs which are part of the DT bindings */ #include <dt-bindings/clock/axg-audio-clkc.h> -#define NR_CLKS 163 +#define NR_CLKS 164 #endif /*__AXG_AUDIO_CLKC_H */
The peripheral clock on the sm1 goes through some muxes and dividers before reaching the audio gates. To model that, without repeating our self too much, the "top" clock signal is introduced and will serve as a the parent of the gates. On the axg and g12a, the top clock is just a pass-through to the audio peripheral clock provided by the main controller. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> --- drivers/clk/meson/axg-audio.c | 19 ++++++++++++++++--- drivers/clk/meson/axg-audio.h | 3 ++- 2 files changed, 18 insertions(+), 4 deletions(-) -- 2.21.0