diff mbox series

[28/36] fbdev: s3c2410fb: remove mach header dependency

Message ID 20191010203043.1241612-28-arnd@arndb.de
State New
Headers show
Series None | expand

Commit Message

Arnd Bergmann Oct. 10, 2019, 8:30 p.m. UTC
The s3c2410fb driver is too deeply intertwined with the s3c24xx
platform code. Change it in a way that avoids the use of platform
header files but having all interface data in a platform_data
header, and the private register definitions next to the driver
itself.

One ugly bit here is that the driver pokes directly into gpio
registers, which are owned by another driver. Passing the
mapped addresses in platform_data is somewhat suboptimal, but
it is a small improvement over the previous version.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/mach-s3c24xx/include/mach/fb.h       |  2 --
 arch/arm/mach-s3c24xx/mach-amlm5900.c         |  7 ++--
 arch/arm/mach-s3c24xx/mach-anubis.c           |  1 -
 arch/arm/mach-s3c24xx/mach-at2440evb.c        |  3 +-
 arch/arm/mach-s3c24xx/mach-bast.c             |  3 +-
 arch/arm/mach-s3c24xx/mach-gta02.c            |  2 +-
 arch/arm/mach-s3c24xx/mach-h1940.c            |  7 ++--
 arch/arm/mach-s3c24xx/mach-jive.c             | 10 ++++--
 arch/arm/mach-s3c24xx/mach-mini2440.c         |  9 +++--
 arch/arm/mach-s3c24xx/mach-n30.c              |  3 +-
 arch/arm/mach-s3c24xx/mach-osiris.c           |  1 -
 arch/arm/mach-s3c24xx/mach-qt2410.c           |  3 +-
 arch/arm/mach-s3c24xx/mach-rx1950.c           |  8 +++--
 arch/arm/mach-s3c24xx/mach-rx3715.c           |  7 ++--
 arch/arm/mach-s3c24xx/mach-smdk2413.c         |  3 +-
 arch/arm/mach-s3c24xx/mach-smdk2416.c         |  1 -
 arch/arm/mach-s3c24xx/mach-smdk2440.c         |  8 +++--
 arch/arm/mach-s3c24xx/mach-smdk2443.c         |  3 +-
 arch/arm/mach-s3c24xx/mach-vstms.c            |  3 +-
 arch/arm/plat-samsung/devs.c                  |  2 +-
 .../video/fbdev/s3c2410fb-regs-lcd.h          | 28 ++++------------
 drivers/video/fbdev/s3c2410fb.c               | 16 +++++----
 .../linux/platform_data}/fb-s3c2410.h         | 33 ++++++++++++++++++-
 23 files changed, 98 insertions(+), 65 deletions(-)
 delete mode 100644 arch/arm/mach-s3c24xx/include/mach/fb.h
 rename arch/arm/mach-s3c24xx/include/mach/regs-lcd.h => drivers/video/fbdev/s3c2410fb-regs-lcd.h (84%)
 rename {arch/arm/plat-samsung/include/plat => include/linux/platform_data}/fb-s3c2410.h (57%)

Comments

Krzysztof Kozlowski Oct. 23, 2019, 1:13 p.m. UTC | #1
On Thu, Oct 10, 2019 at 10:30:12PM +0200, Arnd Bergmann wrote:
> The s3c2410fb driver is too deeply intertwined with the s3c24xx
> platform code. Change it in a way that avoids the use of platform
> header files but having all interface data in a platform_data
> header, and the private register definitions next to the driver
> itself.
> 
> One ugly bit here is that the driver pokes directly into gpio
> registers, which are owned by another driver. Passing the
> mapped addresses in platform_data is somewhat suboptimal, but
> it is a small improvement over the previous version.
> 
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
>  arch/arm/mach-s3c24xx/include/mach/fb.h       |  2 --
>  arch/arm/mach-s3c24xx/mach-amlm5900.c         |  7 ++--
>  arch/arm/mach-s3c24xx/mach-anubis.c           |  1 -
>  arch/arm/mach-s3c24xx/mach-at2440evb.c        |  3 +-
>  arch/arm/mach-s3c24xx/mach-bast.c             |  3 +-
>  arch/arm/mach-s3c24xx/mach-gta02.c            |  2 +-
>  arch/arm/mach-s3c24xx/mach-h1940.c            |  7 ++--
>  arch/arm/mach-s3c24xx/mach-jive.c             | 10 ++++--
>  arch/arm/mach-s3c24xx/mach-mini2440.c         |  9 +++--
>  arch/arm/mach-s3c24xx/mach-n30.c              |  3 +-
>  arch/arm/mach-s3c24xx/mach-osiris.c           |  1 -
>  arch/arm/mach-s3c24xx/mach-qt2410.c           |  3 +-
>  arch/arm/mach-s3c24xx/mach-rx1950.c           |  8 +++--
>  arch/arm/mach-s3c24xx/mach-rx3715.c           |  7 ++--
>  arch/arm/mach-s3c24xx/mach-smdk2413.c         |  3 +-
>  arch/arm/mach-s3c24xx/mach-smdk2416.c         |  1 -
>  arch/arm/mach-s3c24xx/mach-smdk2440.c         |  8 +++--
>  arch/arm/mach-s3c24xx/mach-smdk2443.c         |  3 +-
>  arch/arm/mach-s3c24xx/mach-vstms.c            |  3 +-
>  arch/arm/plat-samsung/devs.c                  |  2 +-
>  .../video/fbdev/s3c2410fb-regs-lcd.h          | 28 ++++------------
>  drivers/video/fbdev/s3c2410fb.c               | 16 +++++----
>  .../linux/platform_data}/fb-s3c2410.h         | 33 ++++++++++++++++++-
>  23 files changed, 98 insertions(+), 65 deletions(-)
>  delete mode 100644 arch/arm/mach-s3c24xx/include/mach/fb.h
>  rename arch/arm/mach-s3c24xx/include/mach/regs-lcd.h => drivers/video/fbdev/s3c2410fb-regs-lcd.h (84%)
>  rename {arch/arm/plat-samsung/include/plat => include/linux/platform_data}/fb-s3c2410.h (57%)
> 
> diff --git a/arch/arm/mach-s3c24xx/include/mach/fb.h b/arch/arm/mach-s3c24xx/include/mach/fb.h
> deleted file mode 100644
> index 4e539cb8b884..000000000000
> --- a/arch/arm/mach-s3c24xx/include/mach/fb.h
> +++ /dev/null
> @@ -1,2 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0 */
> -#include <plat/fb-s3c2410.h>
> diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c
> index 40ad23b52bc0..ef6de1b1d0c6 100644
> --- a/arch/arm/mach-s3c24xx/mach-amlm5900.c
> +++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c
> @@ -30,9 +30,8 @@
>  #include <mach/hardware.h>
>  #include <asm/irq.h>
>  #include <asm/mach-types.h>
> -#include <mach/fb.h>
> +#include <linux/platform_data/fb-s3c2410.h>
>  
> -#include <mach/regs-lcd.h>
>  #include <mach/regs-gpio.h>
>  #include <mach/gpio-samsung.h>
>  
> @@ -194,13 +193,17 @@ static struct s3c2410fb_mach_info __initdata amlm5900_fb_info = {
>  
>  	.gpccon =	0xaaaaaaaa,
>  	.gpccon_mask =	0xffffffff,
> +	.gpccon_reg =	S3C2410_GPCCON,
>  	.gpcup =	0x0000ffff,
>  	.gpcup_mask =	0xffffffff,
> +	.gpcup_reg =	S3C2410_GPCUP,
>  
>  	.gpdcon =	0xaaaaaaaa,
>  	.gpdcon_mask =	0xffffffff,
> +	.gpdcon_reg =	S3C2410_GPDCON,
>  	.gpdup =	0x0000ffff,
>  	.gpdup_mask =	0xffffffff,
> +	.gpdup_reg =	S3C2410_GPDUP,
>  };
>  #endif
>  
> diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
> index 072966dcad78..e1a73274e90b 100644
> --- a/arch/arm/mach-s3c24xx/mach-anubis.c
> +++ b/arch/arm/mach-s3c24xx/mach-anubis.c
> @@ -29,7 +29,6 @@
>  #include <asm/mach-types.h>
>  
>  #include <mach/regs-gpio.h>
> -#include <mach/regs-lcd.h>
>  #include <mach/gpio-samsung.h>
>  #include <linux/platform_data/mtd-nand-s3c2410.h>
>  #include <linux/platform_data/i2c-s3c2410.h>
> diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
> index b2199906e678..bfda6dd2a9d5 100644
> --- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
> +++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
> @@ -25,12 +25,11 @@
>  #include <asm/mach/irq.h>
>  
>  #include <mach/hardware.h>
> -#include <mach/fb.h>
> +#include <linux/platform_data/fb-s3c2410.h>
>  #include <asm/irq.h>
>  #include <asm/mach-types.h>
>  
>  #include <mach/regs-gpio.h>
> -#include <mach/regs-lcd.h>
>  #include <mach/gpio-samsung.h>
>  #include <linux/platform_data/mtd-nand-s3c2410.h>
>  #include <linux/platform_data/i2c-s3c2410.h>
> diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c
> index a7c3955ae8f6..cc941b5030ea 100644
> --- a/arch/arm/mach-s3c24xx/mach-bast.c
> +++ b/arch/arm/mach-s3c24xx/mach-bast.c
> @@ -40,10 +40,9 @@
>  #include <asm/mach/irq.h>
>  #include <asm/mach-types.h>
>  
> -#include <mach/fb.h>
>  #include <mach/hardware.h>
> +#include <linux/platform_data/fb-s3c2410.h>
>  #include <mach/regs-gpio.h>
> -#include <mach/regs-lcd.h>
>  #include <mach/gpio-samsung.h>
>  
>  #include <plat/cpu.h>
> diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
> index 61b8c6badeb8..1e42782dbd30 100644
> --- a/arch/arm/mach-s3c24xx/mach-gta02.c
> +++ b/arch/arm/mach-s3c24xx/mach-gta02.c
> @@ -57,8 +57,8 @@
>  #include <linux/platform_data/touchscreen-s3c2410.h>
>  #include <linux/platform_data/usb-ohci-s3c2410.h>
>  #include <linux/platform_data/usb-s3c2410_udc.h>
> +#include <linux/platform_data/fb-s3c2410.h>
>  
> -#include <mach/fb.h>
>  #include <mach/hardware.h>
>  #include <mach/regs-gpio.h>
>  #include <mach/regs-irq.h>
> diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
> index 446891e23511..d56e3befa459 100644
> --- a/arch/arm/mach-s3c24xx/mach-h1940.c
> +++ b/arch/arm/mach-s3c24xx/mach-h1940.c
> @@ -47,11 +47,10 @@
>  
>  #include <sound/uda1380.h>
>  
> -#include <mach/fb.h>
> +#include <linux/platform_data/fb-s3c2410.h>
>  #include <mach/hardware.h>
>  #include <mach/regs-clock.h>
>  #include <mach/regs-gpio.h>
> -#include <mach/regs-lcd.h>
>  #include <mach/gpio-samsung.h>
>  
>  #include <plat/cpu.h>
> @@ -211,12 +210,16 @@ static struct s3c2410fb_mach_info h1940_fb_info __initdata = {
>  	.lpcsel =	0x02,
>  	.gpccon =	0xaa940659,
>  	.gpccon_mask =	0xffffc0f0,
> +	.gpccon_reg =	S3C2410_GPCCON,
>  	.gpcup =	0x0000ffff,
>  	.gpcup_mask =	0xffffffff,
> +	.gpcup_reg =	S3C2410_GPCUP,
>  	.gpdcon =	0xaa84aaa0,
>  	.gpdcon_mask =	0xffffffff,
> +	.gpdcon_reg =	S3C2410_GPDCON,
>  	.gpdup =	0x0000faff,
>  	.gpdup_mask =	0xffffffff,
> +	.gpdup_reg =	S3C2410_GPDUP,
>  };
>  
>  static int power_supply_init(struct device *dev)
> diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
> index 885e8f12e4b9..3b33132b2334 100644
> --- a/arch/arm/mach-s3c24xx/mach-jive.c
> +++ b/arch/arm/mach-s3c24xx/mach-jive.c
> @@ -32,8 +32,7 @@
>  #include <linux/platform_data/i2c-s3c2410.h>
>  
>  #include <mach/regs-gpio.h>
> -#include <mach/regs-lcd.h>
> -#include <mach/fb.h>
> +#include <linux/platform_data/fb-s3c2410.h>
>  #include <mach/gpio-samsung.h>
>  
>  #include <asm/mach-types.h>
> @@ -321,6 +320,7 @@ static struct s3c2410fb_mach_info jive_lcd_config = {
>  	 * data. */
>  
>  	.gpcup		= (0xf << 1) | (0x3f << 10),
> +	.gpcup_reg =	S3C2410_GPCUP,

Nits: indentation before/after '=' looks wrong. Tab should be
before '=', one space after.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm/mach-s3c24xx/include/mach/fb.h b/arch/arm/mach-s3c24xx/include/mach/fb.h
deleted file mode 100644
index 4e539cb8b884..000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/fb.h
+++ /dev/null
@@ -1,2 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <plat/fb-s3c2410.h>
diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c
index 40ad23b52bc0..ef6de1b1d0c6 100644
--- a/arch/arm/mach-s3c24xx/mach-amlm5900.c
+++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c
@@ -30,9 +30,8 @@ 
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
 
-#include <mach/regs-lcd.h>
 #include <mach/regs-gpio.h>
 #include <mach/gpio-samsung.h>
 
@@ -194,13 +193,17 @@  static struct s3c2410fb_mach_info __initdata amlm5900_fb_info = {
 
 	.gpccon =	0xaaaaaaaa,
 	.gpccon_mask =	0xffffffff,
+	.gpccon_reg =	S3C2410_GPCCON,
 	.gpcup =	0x0000ffff,
 	.gpcup_mask =	0xffffffff,
+	.gpcup_reg =	S3C2410_GPCUP,
 
 	.gpdcon =	0xaaaaaaaa,
 	.gpdcon_mask =	0xffffffff,
+	.gpdcon_reg =	S3C2410_GPDCON,
 	.gpdup =	0x0000ffff,
 	.gpdup_mask =	0xffffffff,
+	.gpdup_reg =	S3C2410_GPDUP,
 };
 #endif
 
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
index 072966dcad78..e1a73274e90b 100644
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -29,7 +29,6 @@ 
 #include <asm/mach-types.h>
 
 #include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/i2c-s3c2410.h>
diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
index b2199906e678..bfda6dd2a9d5 100644
--- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -25,12 +25,11 @@ 
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/i2c-s3c2410.h>
diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c
index a7c3955ae8f6..cc941b5030ea 100644
--- a/arch/arm/mach-s3c24xx/mach-bast.c
+++ b/arch/arm/mach-s3c24xx/mach-bast.c
@@ -40,10 +40,9 @@ 
 #include <asm/mach/irq.h>
 #include <asm/mach-types.h>
 
-#include <mach/fb.h>
 #include <mach/hardware.h>
+#include <linux/platform_data/fb-s3c2410.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 
 #include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index 61b8c6badeb8..1e42782dbd30 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -57,8 +57,8 @@ 
 #include <linux/platform_data/touchscreen-s3c2410.h>
 #include <linux/platform_data/usb-ohci-s3c2410.h>
 #include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/fb-s3c2410.h>
 
-#include <mach/fb.h>
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-irq.h>
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
index 446891e23511..d56e3befa459 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -47,11 +47,10 @@ 
 
 #include <sound/uda1380.h>
 
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
 #include <mach/hardware.h>
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 
 #include <plat/cpu.h>
@@ -211,12 +210,16 @@  static struct s3c2410fb_mach_info h1940_fb_info __initdata = {
 	.lpcsel =	0x02,
 	.gpccon =	0xaa940659,
 	.gpccon_mask =	0xffffc0f0,
+	.gpccon_reg =	S3C2410_GPCCON,
 	.gpcup =	0x0000ffff,
 	.gpcup_mask =	0xffffffff,
+	.gpcup_reg =	S3C2410_GPCUP,
 	.gpdcon =	0xaa84aaa0,
 	.gpdcon_mask =	0xffffffff,
+	.gpdcon_reg =	S3C2410_GPDCON,
 	.gpdup =	0x0000faff,
 	.gpdup_mask =	0xffffffff,
+	.gpdup_reg =	S3C2410_GPDUP,
 };
 
 static int power_supply_init(struct device *dev)
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index 885e8f12e4b9..3b33132b2334 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -32,8 +32,7 @@ 
 #include <linux/platform_data/i2c-s3c2410.h>
 
 #include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
 #include <mach/gpio-samsung.h>
 
 #include <asm/mach-types.h>
@@ -321,6 +320,7 @@  static struct s3c2410fb_mach_info jive_lcd_config = {
 	 * data. */
 
 	.gpcup		= (0xf << 1) | (0x3f << 10),
+	.gpcup_reg =	S3C2410_GPCUP,
 
 	.gpccon		= (S3C2410_GPC1_VCLK   | S3C2410_GPC2_VLINE |
 			   S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM |
@@ -334,8 +334,12 @@  static struct s3c2410fb_mach_info jive_lcd_config = {
 			   S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
 			   S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
 
+	.gpccon_reg =	S3C2410_GPCCON,
+
 	.gpdup		= (0x3f << 2) | (0x3f << 10),
 
+	.gpdup_reg =	S3C2410_GPDUP,
+
 	.gpdcon		= (S3C2410_GPD2_VD10  | S3C2410_GPD3_VD11 |
 			   S3C2410_GPD4_VD12  | S3C2410_GPD5_VD13 |
 			   S3C2410_GPD6_VD14  | S3C2410_GPD7_VD15 |
@@ -349,6 +353,8 @@  static struct s3c2410fb_mach_info jive_lcd_config = {
 			   S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
 			   S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
 			   S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
+
+	.gpdcon_reg =	S3C2410_GPDCON,
 };
 
 /* ILI9320 support. */
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index d73167f615b8..2301e07c7d64 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -30,13 +30,12 @@ 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
+#include <linux/platform_data/fb-s3c2410.h>
 #include <mach/hardware.h>
-#include <mach/fb.h>
 #include <asm/mach-types.h>
 
 #include <mach/regs-gpio.h>
 #include <linux/platform_data/leds-s3c24xx.h>
-#include <mach/regs-lcd.h>
 #include <mach/irqs.h>
 #include <mach/gpio-samsung.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
@@ -215,6 +214,9 @@  static struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
 			   S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
 			   S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
 
+	.gpccon_reg =	S3C2410_GPCCON,
+	.gpcup_reg =	S3C2410_GPCUP,
+
 	.gpdup		= (0x3f << 2) | (0x3f << 10),
 
 	.gpdcon		= (S3C2410_GPD2_VD10  | S3C2410_GPD3_VD11 |
@@ -230,6 +232,9 @@  static struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
 			   S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
 			   S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
 			   S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
+
+	.gpdcon_reg =	S3C2410_GPDCON,
+	.gpdup_reg =	S3C2410_GPDUP,
 };
 
 /* MMC/SD  */
diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c
index f283abab0761..6b8ee5ba00ca 100644
--- a/arch/arm/mach-s3c24xx/mach-n30.c
+++ b/arch/arm/mach-s3c24xx/mach-n30.c
@@ -31,10 +31,9 @@ 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
 #include <linux/platform_data/leds-s3c24xx.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 #include <plat/gpio-cfg.h>
 
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
index ee3630cb236a..262e77bd48de 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -44,7 +44,6 @@ 
 
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 
 #include "common.h"
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
index 9b47b8434f10..1d0f5d65e7e5 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -33,8 +33,7 @@ 
 #include <asm/mach-types.h>
 
 #include <linux/platform_data/leds-s3c24xx.h>
-#include <mach/regs-lcd.h>
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/usb-s3c2410_udc.h>
 #include <linux/platform_data/i2c-s3c2410.h>
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 7752203fd9cd..ee4a0992339f 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -42,12 +42,11 @@ 
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/touchscreen-s3c2410.h>
 #include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/fb-s3c2410.h>
 
 #include <sound/uda1380.h>
 
-#include <mach/fb.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 
 #include <plat/cpu.h>
@@ -361,14 +360,17 @@  static struct s3c2410fb_mach_info rx1950_lcd_cfg = {
 	.lpcsel = 0x02,
 	.gpccon = 0xaa9556a9,
 	.gpccon_mask = 0xffc003fc,
+	.gpccon_reg =	S3C2410_GPCCON,
 	.gpcup = 0x0000ffff,
 	.gpcup_mask = 0xffffffff,
+	.gpcup_reg =	S3C2410_GPCUP,
 
 	.gpdcon = 0xaa90aaa1,
 	.gpdcon_mask = 0xffc0fff0,
+	.gpdcon_reg =	S3C2410_GPDCON,
 	.gpdup = 0x0000fcfd,
 	.gpdup_mask = 0xffffffff,
-
+	.gpdup_reg =	S3C2410_GPDUP,
 };
 
 static struct pwm_lookup rx1950_pwm_lookup[] = {
diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c
index 2542c523ad46..87f3274241b2 100644
--- a/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ b/arch/arm/mach-s3c24xx/mach-rx3715.c
@@ -30,14 +30,13 @@ 
 #include <asm/mach/map.h>
 
 #include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/fb-s3c2410.h>
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <mach/fb.h>
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 #include <plat/gpio-cfg.h>
 
@@ -126,13 +125,17 @@  static struct s3c2410fb_mach_info rx3715_fb_info __initdata = {
 
 	.gpccon =	0xaa955699,
 	.gpccon_mask =	0xffc003cc,
+	.gpccon_reg =	S3C2410_GPCCON,
 	.gpcup =	0x0000ffff,
 	.gpcup_mask =	0xffffffff,
+	.gpcup_reg =	S3C2410_GPCUP,
 
 	.gpdcon =	0xaa95aaa1,
 	.gpdcon_mask =	0xffc0fff0,
+	.gpdcon_reg =	S3C2410_GPDCON,
 	.gpdup =	0x0000faff,
 	.gpdup_mask =	0xffffffff,
+	.gpdup_reg =	S3C2410_GPDUP,
 };
 
 static struct mtd_partition __initdata rx3715_nand_part[] = {
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c
index 2bba4f1fa7ee..eec0d3dc4bb1 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2413.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c
@@ -31,12 +31,11 @@ 
 
 //#include <asm/debug-ll.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
 
 #include <linux/platform_data/usb-s3c2410_udc.h>
 #include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/fb-s3c2410.h>
 #include <mach/gpio-samsung.h>
-#include <mach/fb.h>
 #include <plat/gpio-cfg.h>
 
 #include <plat/devs.h>
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c
index 61c3e45898d3..fbd3a8d96f94 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2416.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c
@@ -30,7 +30,6 @@ 
 #include <asm/mach-types.h>
 
 #include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
 #include <mach/regs-s3c2443-clock.h>
 #include <mach/gpio-samsung.h>
 
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c
index f0fceda3e8e6..b9b0f2a8c904 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2440.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c
@@ -28,11 +28,10 @@ 
 #include <asm/mach-types.h>
 
 #include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 #include <plat/gpio-cfg.h>
 
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/devs.h>
@@ -139,6 +138,11 @@  static struct s3c2410fb_mach_info smdk2440_fb_info __initdata = {
 	.gpdcon_mask	= 0xffffffff,
 	.gpdup		= 0x0000faff,
 	.gpdup_mask	= 0xffffffff,
+
+	.gpccon_reg =	S3C2410_GPCCON,
+	.gpcup_reg =	S3C2410_GPCUP,
+	.gpdcon_reg =	S3C2410_GPDCON,
+	.gpdup_reg =	S3C2410_GPDUP,
 #endif
 
 	.lpcsel		= ((0xCE6) & ~7) | 1<<4,
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c
index 2358ed5ed7be..a4c1022678a9 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2443.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c
@@ -27,9 +27,8 @@ 
 #include <asm/mach-types.h>
 
 #include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
 
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/devs.h>
diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
index f333ca05de68..08acc556879b 100644
--- a/arch/arm/mach-s3c24xx/mach-vstms.c
+++ b/arch/arm/mach-s3c24xx/mach-vstms.c
@@ -30,11 +30,10 @@ 
 #include <asm/mach-types.h>
 
 #include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 #include <plat/gpio-cfg.h>
 
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
 
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index c0739bda060b..92b36bc71a06 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -50,7 +50,7 @@ 
 #include <linux/soc/samsung/s3c-adc.h>
 #include <linux/platform_data/ata-samsung_cf.h>
 #include <plat/fb.h>
-#include <plat/fb-s3c2410.h>
+#include <linux/platform_data/fb-s3c2410.h>
 #include <linux/platform_data/hwmon-s3c.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/keypad.h>
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-lcd.h b/drivers/video/fbdev/s3c2410fb-regs-lcd.h
similarity index 84%
rename from arch/arm/mach-s3c24xx/include/mach/regs-lcd.h
rename to drivers/video/fbdev/s3c2410fb-regs-lcd.h
index 4c3434f261bb..1e46f7a788e5 100644
--- a/arch/arm/mach-s3c24xx/include/mach/regs-lcd.h
+++ b/drivers/video/fbdev/s3c2410fb-regs-lcd.h
@@ -7,6 +7,13 @@ 
 #ifndef ___ASM_ARCH_REGS_LCD_H
 #define ___ASM_ARCH_REGS_LCD_H
 
+/*
+ * a couple of values are used as platform data in
+ * include/linux/platform_data/fb-s3c2410.h and not
+ * duplicated here.
+ */
+#include <linux/platform_data/fb-s3c2410.h>
+
 #define S3C2410_LCDREG(x)	(x)
 
 /* LCD control registers */
@@ -29,13 +36,6 @@ 
 #define S3C2410_LCDCON1_STN8BPP	   (3<<1)
 #define S3C2410_LCDCON1_STN12BPP   (4<<1)
 
-#define S3C2410_LCDCON1_TFT1BPP	   (8<<1)
-#define S3C2410_LCDCON1_TFT2BPP	   (9<<1)
-#define S3C2410_LCDCON1_TFT4BPP	   (10<<1)
-#define S3C2410_LCDCON1_TFT8BPP	   (11<<1)
-#define S3C2410_LCDCON1_TFT16BPP   (12<<1)
-#define S3C2410_LCDCON1_TFT24BPP   (13<<1)
-
 #define S3C2410_LCDCON1_ENVID	   (1)
 
 #define S3C2410_LCDCON1_MODEMASK    0x1E
@@ -66,20 +66,6 @@ 
 
 #define S3C2410_LCDCON4_GET_HSPW(x) ( ((x) >>  0) & 0xFF)
 
-#define S3C2410_LCDCON5_BPP24BL	    (1<<12)
-#define S3C2410_LCDCON5_FRM565	    (1<<11)
-#define S3C2410_LCDCON5_INVVCLK	    (1<<10)
-#define S3C2410_LCDCON5_INVVLINE    (1<<9)
-#define S3C2410_LCDCON5_INVVFRAME   (1<<8)
-#define S3C2410_LCDCON5_INVVD	    (1<<7)
-#define S3C2410_LCDCON5_INVVDEN	    (1<<6)
-#define S3C2410_LCDCON5_INVPWREN    (1<<5)
-#define S3C2410_LCDCON5_INVLEND	    (1<<4)
-#define S3C2410_LCDCON5_PWREN	    (1<<3)
-#define S3C2410_LCDCON5_ENLEND	    (1<<2)
-#define S3C2410_LCDCON5_BSWP	    (1<<1)
-#define S3C2410_LCDCON5_HWSWP	    (1<<0)
-
 /* framebuffer start addressed */
 #define S3C2410_LCDSADDR1   S3C2410_LCDREG(0x14)
 #define S3C2410_LCDSADDR2   S3C2410_LCDREG(0x18)
diff --git a/drivers/video/fbdev/s3c2410fb.c b/drivers/video/fbdev/s3c2410fb.c
index a702da89910b..3e5b91c72f5b 100644
--- a/drivers/video/fbdev/s3c2410fb.c
+++ b/drivers/video/fbdev/s3c2410fb.c
@@ -29,19 +29,18 @@ 
 #include <linux/clk.h>
 #include <linux/cpufreq.h>
 #include <linux/io.h>
+#include <linux/platform_data/fb-s3c2410.h>
 
 #include <asm/div64.h>
 
 #include <asm/mach/map.h>
-#include <mach/regs-lcd.h>
-#include <mach/regs-gpio.h>
-#include <mach/fb.h>
 
 #ifdef CONFIG_PM
 #include <linux/pm.h>
 #endif
 
 #include "s3c2410fb.h"
+#include "s3c2410fb-regs-lcd.h"
 
 /* Debugging stuff */
 #ifdef CONFIG_FB_S3C2410_DEBUG
@@ -676,6 +675,9 @@  static inline void modify_gpio(void __iomem *reg,
 {
 	unsigned long tmp;
 
+	if (!reg)
+		return;
+
 	tmp = readl(reg) & ~mask;
 	writel(tmp | set, reg);
 }
@@ -706,10 +708,10 @@  static int s3c2410fb_init_registers(struct fb_info *info)
 
 	/* modify the gpio(s) with interrupts set (bjd) */
 
-	modify_gpio(S3C2410_GPCUP,  mach_info->gpcup,  mach_info->gpcup_mask);
-	modify_gpio(S3C2410_GPCCON, mach_info->gpccon, mach_info->gpccon_mask);
-	modify_gpio(S3C2410_GPDUP,  mach_info->gpdup,  mach_info->gpdup_mask);
-	modify_gpio(S3C2410_GPDCON, mach_info->gpdcon, mach_info->gpdcon_mask);
+	modify_gpio(mach_info->gpcup_reg,  mach_info->gpcup,  mach_info->gpcup_mask);
+	modify_gpio(mach_info->gpccon_reg, mach_info->gpccon, mach_info->gpccon_mask);
+	modify_gpio(mach_info->gpdup_reg,  mach_info->gpdup,  mach_info->gpdup_mask);
+	modify_gpio(mach_info->gpdcon_reg, mach_info->gpdcon, mach_info->gpdcon_mask);
 
 	local_irq_restore(flags);
 
diff --git a/arch/arm/plat-samsung/include/plat/fb-s3c2410.h b/include/linux/platform_data/fb-s3c2410.h
similarity index 57%
rename from arch/arm/plat-samsung/include/plat/fb-s3c2410.h
rename to include/linux/platform_data/fb-s3c2410.h
index 614240d768b4..10c11e6316d6 100644
--- a/arch/arm/plat-samsung/include/plat/fb-s3c2410.h
+++ b/include/linux/platform_data/fb-s3c2410.h
@@ -8,6 +8,8 @@ 
 #ifndef __ASM_PLAT_FB_S3C2410_H
 #define __ASM_PLAT_FB_S3C2410_H __FILE__
 
+#include <linux/compiler_types.h>
+
 struct s3c2410fb_hw {
 	unsigned long	lcdcon1;
 	unsigned long	lcdcon2;
@@ -20,6 +22,17 @@  struct s3c2410fb_hw {
 struct s3c2410fb_display {
 	/* LCD type */
 	unsigned type;
+#define S3C2410_LCDCON1_DSCAN4	   (0<<5)
+#define S3C2410_LCDCON1_STN4	   (1<<5)
+#define S3C2410_LCDCON1_STN8	   (2<<5)
+#define S3C2410_LCDCON1_TFT	   (3<<5)
+
+#define S3C2410_LCDCON1_TFT1BPP	   (8<<1)
+#define S3C2410_LCDCON1_TFT2BPP	   (9<<1)
+#define S3C2410_LCDCON1_TFT4BPP	   (10<<1)
+#define S3C2410_LCDCON1_TFT8BPP	   (11<<1)
+#define S3C2410_LCDCON1_TFT16BPP   (12<<1)
+#define S3C2410_LCDCON1_TFT24BPP   (13<<1)
 
 	/* Screen size */
 	unsigned short width;
@@ -40,6 +53,19 @@  struct s3c2410fb_display {
 
 	/* lcd configuration registers */
 	unsigned long	lcdcon5;
+#define S3C2410_LCDCON5_BPP24BL	    (1<<12)
+#define S3C2410_LCDCON5_FRM565	    (1<<11)
+#define S3C2410_LCDCON5_INVVCLK	    (1<<10)
+#define S3C2410_LCDCON5_INVVLINE    (1<<9)
+#define S3C2410_LCDCON5_INVVFRAME   (1<<8)
+#define S3C2410_LCDCON5_INVVD	    (1<<7)
+#define S3C2410_LCDCON5_INVVDEN	    (1<<6)
+#define S3C2410_LCDCON5_INVPWREN    (1<<5)
+#define S3C2410_LCDCON5_INVLEND	    (1<<4)
+#define S3C2410_LCDCON5_PWREN	    (1<<3)
+#define S3C2410_LCDCON5_ENLEND	    (1<<2)
+#define S3C2410_LCDCON5_BSWP	    (1<<1)
+#define S3C2410_LCDCON5_HWSWP	    (1<<0)
 };
 
 struct s3c2410fb_mach_info {
@@ -59,10 +85,15 @@  struct s3c2410fb_mach_info {
 	unsigned long	gpdcon;
 	unsigned long	gpdcon_mask;
 
+	void __iomem *  gpccon_reg;
+	void __iomem *  gpcup_reg;
+	void __iomem *  gpdcon_reg;
+	void __iomem *  gpdup_reg;
+
 	/* lpc3600 control register */
 	unsigned long	lpcsel;
 };
 
-extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *);
+extern void s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *);
 
 #endif /* __ASM_PLAT_FB_S3C2410_H */