diff mbox series

[7/7] mtd: rawnand: stm32_fmc2: Use dma_request_chan() instead dma_request_slave_channel()

Message ID 20200227123749.24064-8-peter.ujfalusi@ti.com
State New
Headers show
Series mtd: rawnand: Convert drivers to use dma_request_chan() | expand

Commit Message

Peter Ujfalusi Feb. 27, 2020, 12:37 p.m. UTC
dma_request_slave_channel() is a wrapper on top of dma_request_chan()
eating up the error code.

Use using dma_request_chan() directly and inform user of error in case the
DMA request failed.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>

---
 drivers/mtd/nand/raw/stm32_fmc2_nand.c | 44 ++++++++++++++++++++++----
 1 file changed, 37 insertions(+), 7 deletions(-)

-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Comments

Miquel Raynal March 10, 2020, 6:30 p.m. UTC | #1
On Thu, 2020-02-27 at 12:37:49 UTC, Peter Ujfalusi wrote:
> dma_request_slave_channel() is a wrapper on top of dma_request_chan()

> eating up the error code.

> 

> Use using dma_request_chan() directly and inform user of error in case the

> DMA request failed.

> 

> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>


Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.

Miquel

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
diff mbox series

Patch

diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
index 3ba73f18841f..b6d45cd911ae 100644
--- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
+++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
@@ -1606,15 +1606,36 @@  static int stm32_fmc2_setup_interface(struct nand_chip *chip, int chipnr,
 /* DMA configuration */
 static int stm32_fmc2_dma_setup(struct stm32_fmc2_nfc *fmc2)
 {
-	int ret;
+	int ret = 0;
 
-	fmc2->dma_tx_ch = dma_request_slave_channel(fmc2->dev, "tx");
-	fmc2->dma_rx_ch = dma_request_slave_channel(fmc2->dev, "rx");
-	fmc2->dma_ecc_ch = dma_request_slave_channel(fmc2->dev, "ecc");
+	fmc2->dma_tx_ch = dma_request_chan(fmc2->dev, "tx");
+	if (IS_ERR(fmc2->dma_tx_ch)) {
+		ret = PTR_ERR(fmc2->dma_tx_ch);
+		if (ret != -ENODEV)
+			dev_err(fmc2->dev,
+				"failed to request tx DMA channel: %d\n", ret);
+		fmc2->dma_tx_ch = NULL;
+		goto err_dma;
+	}
 
-	if (!fmc2->dma_tx_ch || !fmc2->dma_rx_ch || !fmc2->dma_ecc_ch) {
-		dev_warn(fmc2->dev, "DMAs not defined in the device tree, polling mode is used\n");
-		return 0;
+	fmc2->dma_rx_ch = dma_request_chan(fmc2->dev, "rx");
+	if (IS_ERR(fmc2->dma_rx_ch)) {
+		ret = PTR_ERR(fmc2->dma_rx_ch);
+		if (ret != -ENODEV)
+			dev_err(fmc2->dev,
+				"failed to request rx DMA channel: %d\n", ret);
+		fmc2->dma_rx_ch = NULL;
+		goto err_dma;
+	}
+
+	fmc2->dma_ecc_ch = dma_request_chan(fmc2->dev, "ecc");
+	if (IS_ERR(fmc2->dma_ecc_ch)) {
+		ret = PTR_ERR(fmc2->dma_ecc_ch);
+		if (ret != -ENODEV)
+			dev_err(fmc2->dev,
+				"failed to request ecc DMA channel: %d\n", ret);
+		fmc2->dma_ecc_ch = NULL;
+		goto err_dma;
 	}
 
 	ret = sg_alloc_table(&fmc2->dma_ecc_sg, FMC2_MAX_SG, GFP_KERNEL);
@@ -1635,6 +1656,15 @@  static int stm32_fmc2_dma_setup(struct stm32_fmc2_nfc *fmc2)
 	init_completion(&fmc2->dma_ecc_complete);
 
 	return 0;
+
+err_dma:
+	if (ret == -ENODEV) {
+		dev_warn(fmc2->dev,
+			 "DMAs not defined in the DT, polling mode is used\n");
+		ret = 0;
+	}
+
+	return ret;
 }
 
 /* NAND callbacks setup */