| Message ID | 1584095350-841-4-git-send-email-akashast@codeaurora.org |
|---|---|
| State | New |
| Headers | show |
| Series | None | expand |
On Fri, Mar 13, 2020 at 4:29 AM Akash Asthana <akashast@codeaurora.org> wrote: > > Add documentation to support RX/TX/CTS/RTS pin swap in HW. > > Signed-off-by: Akash Asthana <akashast@codeaurora.org> > --- > Changes in V5: > - As per Matthias's comment, remove rx-tx-cts-rts-swap property from UART > child node. > > Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml | 6 ++++++ > 1 file changed, 6 insertions(+) STM32 folks need something similar. Can you move this to a common location. That's serial.txt, but that is being converted to DT schema. Rob
Hi Rob, On 3/20/2020 11:37 PM, Rob Herring wrote: > On Fri, Mar 13, 2020 at 4:29 AM Akash Asthana <akashast@codeaurora.org> wrote: >> Add documentation to support RX/TX/CTS/RTS pin swap in HW. >> >> Signed-off-by: Akash Asthana <akashast@codeaurora.org> >> --- >> Changes in V5: >> - As per Matthias's comment, remove rx-tx-cts-rts-swap property from UART >> child node. >> >> Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml | 6 ++++++ >> 1 file changed, 6 insertions(+) > STM32 folks need something similar. Can you move this to a common > location. That's serial.txt, but that is being converted to DT schema. > > Rob Okay, once serial.txt is converted to DT schema, I will move it there. Regards, Akash
Hi Akash, On Tue, Mar 24, 2020 at 10:46:40AM +0530, Akash Asthana wrote: > Hi Rob, > > On 3/20/2020 11:37 PM, Rob Herring wrote: > > On Fri, Mar 13, 2020 at 4:29 AM Akash Asthana <akashast@codeaurora.org> wrote: > > > Add documentation to support RX/TX/CTS/RTS pin swap in HW. > > > > > > Signed-off-by: Akash Asthana <akashast@codeaurora.org> > > > --- > > > Changes in V5: > > > - As per Matthias's comment, remove rx-tx-cts-rts-swap property from UART > > > child node. > > > > > > Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml | 6 ++++++ > > > 1 file changed, 6 insertions(+) > > STM32 folks need something similar. Can you move this to a common > > location. That's serial.txt, but that is being converted to DT schema. > > > > Rob > > Okay, once serial.txt is converted to DT schema, I will move it there. It has landed upstream: 175a7427bb72 dt-bindings: serial: Convert generic bindings to json-schema
Hi Matthias Thanks for notifying, I will make the changes. Regards, Akash On 4/25/2020 2:27 AM, Matthias Kaehlcke wrote: > Hi Akash, > > On Tue, Mar 24, 2020 at 10:46:40AM +0530, Akash Asthana wrote: >> Hi Rob, >> >> On 3/20/2020 11:37 PM, Rob Herring wrote: >>> On Fri, Mar 13, 2020 at 4:29 AM Akash Asthana <akashast@codeaurora.org> wrote: >>>> Add documentation to support RX/TX/CTS/RTS pin swap in HW. >>>> >>>> Signed-off-by: Akash Asthana <akashast@codeaurora.org> >>>> --- >>>> Changes in V5: >>>> - As per Matthias's comment, remove rx-tx-cts-rts-swap property from UART >>>> child node. >>>> >>>> Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml | 6 ++++++ >>>> 1 file changed, 6 insertions(+) >>> STM32 folks need something similar. Can you move this to a common >>> location. That's serial.txt, but that is being converted to DT schema. >>> >>> Rob >> Okay, once serial.txt is converted to DT schema, I will move it there. > It has landed upstream: > > 175a7427bb72 dt-bindings: serial: Convert generic bindings to json-schema
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml index 533400b..85f9028 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml @@ -172,6 +172,12 @@ patternProperties: - description: UART core irq - description: Wakeup irq (RX GPIO) + rx-tx-swap: + description: RX and TX pins are swapped + + cts-rts-swap: + description: CTS and RTS pins are swapped + required: - compatible - interrupts
Add documentation to support RX/TX/CTS/RTS pin swap in HW. Signed-off-by: Akash Asthana <akashast@codeaurora.org> --- Changes in V5: - As per Matthias's comment, remove rx-tx-cts-rts-swap property from UART child node. Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml | 6 ++++++ 1 file changed, 6 insertions(+)