[v4,0/2] Add support for rm69299 Visionox panel driver and add devicetree bindings for visionox panel

Adding support for visionox rm69299 panel driver and adding bindings for the same panel.

Harigovindan P (2):
  dt-bindings: display: add visionox rm69299 panel variant
  drm/panel: add support for rm69299 visionox panel driver

 .../display/panel/visionox,rm69299.yaml       |  85 +++++
 drivers/gpu/drm/panel/Kconfig                 |   8 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 .../gpu/drm/panel/panel-visionox-rm69299.c    | 322 ++++++++++++++++++
 4 files changed, 416 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml
 create mode 100644 drivers/gpu/drm/panel/panel-visionox-rm69299.c

Hi Harigovindan

Thanks for the follow-up. There are still a few things to improve.
See below.

	Sam

On Fri, Mar 06, 2020 at 04:06:27PM +0530, Harigovindan P wrote:
> Add bindings for visionox rm69299 panel.
> 
> Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
> ---
> 
> Changes in v2:
> 	- Removed unwanted properties from description.
> 	- Creating source files without execute permissions(Rob Herring).
> Changes in v3:
> 	- Changing txt file into yaml
> Changes in v4:
> 	- Updating license identifier.
> 	- Moving yaml file inside panel directory.
> 	- Removing pinctrl entries.
> 	- Adding documentation for reset-gpios.
> 
>  .../display/panel/visionox,rm69299.yaml       | 85 +++++++++++++++++++
>  1 file changed, 85 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml
> new file mode 100644
> index 000000000000..93cae431207c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml
> @@ -0,0 +1,85 @@
> +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/visionox,rm69299.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Visionox model RM69299 Panels Device Tree Bindings.
> +
> +maintainers:
> + - Harigovindan P <harigovi@codeaurora.org>
> +
> +description: |
> + This binding is for display panels using a Visionox RM692999 panel.
> +
> +allOf:
> + - $ref: panel-common.yaml#
> +
> +patternProperties:
> +  "^(panel|panel-dsi)@[0-9]$":
> +    type: object

This looks wrong. None of the other panels needs to specify
a patternProperties, and neither do we need to do so for this panel.


> +    properties:
> +      compatible:
> +        const: visionox,rm69299-1080p-display
The compatible is what we use to match this binding.


> +
> +      reg:
> +        maxItems: 1
> +
> +      vdda-supply:
> +        description:
> +          Phandle of the regulator that provides the vdda supply voltage.
> +
> +      vdd3p3-supply:
> +        description:
> +          Phandle of the regulator that provides the vdd3p3 supply voltage.
> +
> +      ports:
> +        type: object
> +        description:
> +          A node containing DSI input & output port nodes with endpoint
> +          definitions as documented in
> +          Documentation/devicetree/bindings/media/video-interfaces.txt
> +          Documentation/devicetree/bindings/graph.txt

I think you miss as " |" after "description:"
Again, see other panel bindings.


> +        properties:
> +          port@0:

Please just use
            port: true

port is already documented in panel-common.yaml.

> +            type: object
> +            description:
> +              DSI input port node.
> +
> +      reset-gpios:
reset-gpios is part of panel-common.
So specify only:
         reset-gpios: true

No description, as it is in panel-common.


> +        description:
> +          a GPIO spec for the reset pin.
> +
> +required:
> +  - compatible
> +  - reg
> +  - vdda-supply
> +  - vdd3p3-supply
> +  - reset-gpios
> +
> +additionalProperties: false
> +
> +examples:
> +- |
> +    dsi@ae94000 {
No @ae94000 - this will warn with upcoming dt_binding_check
improvements.

> +        panel@0 {
> +            compatible = "visionox,rm69299-1080p-display";
> +
> +            vdda-supply = <&src_pp1800_l8c>;
> +            vdd3p3-supply = <&src_pp2800_l18a>;
> +
> +            reset-gpios = <&pm6150l_gpio 3 0>;
reg property is required, but missing in the example.


> +            ports {
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +                    port@0 {
> +                            reg = <0>;
> +                            panel0_in: endpoint {
> +                                remote-endpoint = <&dsi0_out>;
> +                            };
> +                    };
> +            };
> +        };
> +    };
> +...
> +
> -- 
> 2.25.1
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel