Message ID | 20200302093902.27849-4-cleger@kalray.eu |
---|---|
State | New |
Headers | show |
Series | remoteproc: Add elf64 support | expand |
----- On 9 Mar, 2020, at 20:52, Mathieu Poirier mathieu.poirier@linaro.org wrote: > On Mon, Mar 02, 2020 at 10:38:57AM +0100, Clement Leger wrote: >> elf64 entry is defined as a u64. Since boot_addr is used to store the >> elf entry point, change boot_addr type to u64 to support both elf32 >> and elf64. In the same time, fix users that were using this variable. >> >> Signed-off-by: Clement Leger <cleger@kalray.eu> >> --- >> drivers/remoteproc/remoteproc_elf_loader.c | 2 +- >> drivers/remoteproc/remoteproc_internal.h | 2 +- >> drivers/remoteproc/st_remoteproc.c | 2 +- >> include/linux/remoteproc.h | 4 ++-- >> 4 files changed, 5 insertions(+), 5 deletions(-) >> >> diff --git a/drivers/remoteproc/remoteproc_elf_loader.c >> b/drivers/remoteproc/remoteproc_elf_loader.c >> index 606aae166eba..c2a9783cfb9a 100644 >> --- a/drivers/remoteproc/remoteproc_elf_loader.c >> +++ b/drivers/remoteproc/remoteproc_elf_loader.c >> @@ -102,7 +102,7 @@ EXPORT_SYMBOL(rproc_elf_sanity_check); >> * Note that the boot address is not a configurable property of all remote >> * processors. Some will always boot at a specific hard-coded address. >> */ >> -u32 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw) >> +u64 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw) >> { >> struct elf32_hdr *ehdr = (struct elf32_hdr *)fw->data; >> >> diff --git a/drivers/remoteproc/remoteproc_internal.h >> b/drivers/remoteproc/remoteproc_internal.h >> index 58580210575c..0deae5f237b8 100644 >> --- a/drivers/remoteproc/remoteproc_internal.h >> +++ b/drivers/remoteproc/remoteproc_internal.h >> @@ -55,7 +55,7 @@ phys_addr_t rproc_va_to_pa(void *cpu_addr); >> int rproc_trigger_recovery(struct rproc *rproc); >> >> int rproc_elf_sanity_check(struct rproc *rproc, const struct firmware *fw); >> -u32 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw); >> +u64 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw); >> int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw); >> int rproc_elf_load_rsc_table(struct rproc *rproc, const struct firmware *fw); >> struct resource_table *rproc_elf_find_loaded_rsc_table(struct rproc *rproc, > > The return type of function rproc_get_boot_addr() should also be changed from > u32 to u64. Or perhaps this is intentional to make sure rproc->bootaddr never > occupies more than 32bit? No, this is a mistake clearly. I haven't been able to test with a 64 bit boot address since our remote processors always boot in the 32 bits space. But since the elf64 boot address is on 64 bitsn this was a logical modification. I will fix that. > >> diff --git a/drivers/remoteproc/st_remoteproc.c >> b/drivers/remoteproc/st_remoteproc.c >> index ee13d23b43a9..a3268d95a50e 100644 >> --- a/drivers/remoteproc/st_remoteproc.c >> +++ b/drivers/remoteproc/st_remoteproc.c >> @@ -190,7 +190,7 @@ static int st_rproc_start(struct rproc *rproc) >> } >> } >> >> - dev_info(&rproc->dev, "Started from 0x%x\n", rproc->bootaddr); >> + dev_info(&rproc->dev, "Started from 0x%llx\n", rproc->bootaddr); >> >> return 0; >> >> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h >> index bee559330204..1683d6c386a6 100644 >> --- a/include/linux/remoteproc.h >> +++ b/include/linux/remoteproc.h >> @@ -382,7 +382,7 @@ struct rproc_ops { >> struct rproc *rproc, const struct firmware *fw); >> int (*load)(struct rproc *rproc, const struct firmware *fw); >> int (*sanity_check)(struct rproc *rproc, const struct firmware *fw); >> - u32 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw); >> + u64 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw); >> }; >> >> /** >> @@ -498,7 +498,7 @@ struct rproc { >> int num_traces; >> struct list_head carveouts; >> struct list_head mappings; >> - u32 bootaddr; >> + u64 bootaddr; >> struct list_head rvdevs; >> struct list_head subdevs; >> struct idr notifyids; >> -- >> 2.15.0.276.g89ea799
diff --git a/drivers/remoteproc/remoteproc_elf_loader.c b/drivers/remoteproc/remoteproc_elf_loader.c index 606aae166eba..c2a9783cfb9a 100644 --- a/drivers/remoteproc/remoteproc_elf_loader.c +++ b/drivers/remoteproc/remoteproc_elf_loader.c @@ -102,7 +102,7 @@ EXPORT_SYMBOL(rproc_elf_sanity_check); * Note that the boot address is not a configurable property of all remote * processors. Some will always boot at a specific hard-coded address. */ -u32 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw) +u64 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw) { struct elf32_hdr *ehdr = (struct elf32_hdr *)fw->data; diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h index 58580210575c..0deae5f237b8 100644 --- a/drivers/remoteproc/remoteproc_internal.h +++ b/drivers/remoteproc/remoteproc_internal.h @@ -55,7 +55,7 @@ phys_addr_t rproc_va_to_pa(void *cpu_addr); int rproc_trigger_recovery(struct rproc *rproc); int rproc_elf_sanity_check(struct rproc *rproc, const struct firmware *fw); -u32 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw); +u64 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw); int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw); int rproc_elf_load_rsc_table(struct rproc *rproc, const struct firmware *fw); struct resource_table *rproc_elf_find_loaded_rsc_table(struct rproc *rproc, diff --git a/drivers/remoteproc/st_remoteproc.c b/drivers/remoteproc/st_remoteproc.c index ee13d23b43a9..a3268d95a50e 100644 --- a/drivers/remoteproc/st_remoteproc.c +++ b/drivers/remoteproc/st_remoteproc.c @@ -190,7 +190,7 @@ static int st_rproc_start(struct rproc *rproc) } } - dev_info(&rproc->dev, "Started from 0x%x\n", rproc->bootaddr); + dev_info(&rproc->dev, "Started from 0x%llx\n", rproc->bootaddr); return 0; diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h index bee559330204..1683d6c386a6 100644 --- a/include/linux/remoteproc.h +++ b/include/linux/remoteproc.h @@ -382,7 +382,7 @@ struct rproc_ops { struct rproc *rproc, const struct firmware *fw); int (*load)(struct rproc *rproc, const struct firmware *fw); int (*sanity_check)(struct rproc *rproc, const struct firmware *fw); - u32 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw); + u64 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw); }; /** @@ -498,7 +498,7 @@ struct rproc { int num_traces; struct list_head carveouts; struct list_head mappings; - u32 bootaddr; + u64 bootaddr; struct list_head rvdevs; struct list_head subdevs; struct idr notifyids;
elf64 entry is defined as a u64. Since boot_addr is used to store the elf entry point, change boot_addr type to u64 to support both elf32 and elf64. In the same time, fix users that were using this variable. Signed-off-by: Clement Leger <cleger@kalray.eu> --- drivers/remoteproc/remoteproc_elf_loader.c | 2 +- drivers/remoteproc/remoteproc_internal.h | 2 +- drivers/remoteproc/st_remoteproc.c | 2 +- include/linux/remoteproc.h | 4 ++-- 4 files changed, 5 insertions(+), 5 deletions(-)