| Message ID | 20191230164441.28375-1-mike.leach@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | None | expand |
Thanks - these will be fixed in v8 Mike On Mon, 30 Dec 2019 at 22:31, Randy Dunlap <rdunlap@infradead.org> wrote: > > Hi Mike, > > Just a couple of small nits below. > > > On 12/30/19 8:44 AM, Mike Leach wrote: > > Add new document covering CTI / CTM usage in CoreSight. > > > > Add section in coresight.rst introducing CTI and CTM modules with link > > to new document. > > > > Signed-off-by: Mike Leach <mike.leach@linaro.org> > > Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> > > Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> > > --- > > .../trace/coresight/coresight-ect.rst | 211 ++++++++++++++++++ > > Documentation/trace/coresight/coresight.rst | 13 ++ > > 2 files changed, 224 insertions(+) > > create mode 100644 Documentation/trace/coresight/coresight-ect.rst > > > > diff --git a/Documentation/trace/coresight/coresight-ect.rst b/Documentation/trace/coresight/coresight-ect.rst > > new file mode 100644 > > index 000000000000..3e06588f24fa > > --- /dev/null > > +++ b/Documentation/trace/coresight/coresight-ect.rst > > @@ -0,0 +1,211 @@ > > +============================================= > > +CoreSight Embedded Cross Trigger (CTI & CTM). > > +============================================= > > + > > + :Author: Mike Leach <mike.leach@linaro.org> > > + :Date: November 2019 > > + > > +Hardware Description > > +-------------------- > > + > > +The CoreSight Cross Trigger Interface (CTI) is a hardware device that takes > > +individual input and output hardware signals known as triggers to and from > > +devices and interconnects them via the Cross Trigger Matrix (CTM) to other > > +devices via numbered channels, in order to propagate events between devices. > > + > > +e.g.:: > > + > > + 0000000 in_trigs ::::::: > > + 0 C 0----------->: : +======>(other CTI channel IO) > > + 0 P 0<-----------: : v > > + 0 U 0 out_trigs : : Channels ***** ::::::: > > + 0000000 : CTI :<=========>*CTM*<====>: CTI :---+ > > + ####### in_trigs : : (id 0-3) ***** ::::::: v > > + # ETM #----------->: : ^ ####### > > + # #<-----------: : +---# ETR # > > + ####### out_trigs ::::::: ####### > > + > > +The CTI driver enables the programming of the CTI to attach triggers to > > +channels. When an input trigger becomes active, the attached channel will > > +become active. Any output trigger attached to that channel will also > > +become active. The active channel is propagated to other CTIs via the CTM, > > +activating connected output triggers there, unless filtered by the CTI > > +channel gate. > > + > > +It is also possible to activate a channel using system software directly > > +programming registers in the CTI. > > + > > +The CTIs are registered by the system to be associated with CPUs and/or other > > +CoreSight devices on the trace data path. When these devices are enabled the > > +attached CTIs will also be enabled. By default/on power up the CTIs have > > +no programmed trigger/channel attachments, so will not affect the system > > +until explicitly programmed. > > + > > +The hardware trigger connections between CTIs and devices is implementation > > +defined, unless the CPU/ETM combination is a v8 architecture, in which case > > +the connections have an architecturally defined standard layout. > > + > > +The hardware trigger signals can also be connected to non-CoreSight devices > > +(e.g. UART), or be propagated off chip as hardware IO lines. > > + > > +All the CTI devices are associated with a CTM. On many systems there will be a > > +single effective CTM (one CTM, or multiple CTMs all interconnected), but it is > > +possible that systems can have nets of CTIs+CTM that are not interconnected by > > +a CTM to each other. On these systems a CTM index is declared to associate > > +CTI devices that are interconnected via a given CTM. > > + > > +Sysfs files and directories > > +--------------------------- > > + > > +The CTI devices appear on the existing CoreSight bus alongside the other > > +CoreSight devices:: > > + > > + >$ ls /sys/bus/coresight/devices > > + cti_cpu0 cti_cpu2 cti_sys0 etm0 etm2 funnel0 replicator0 tmc_etr0 > > + cti_cpu1 cti_cpu3 cti_sys1 etm1 etm3 funnel1 tmc_etf0 tpiu0 > > + > > +The ``cti_cpu<N>`` named CTIs are associated with a CPU, and any ETM used by > > +that core. the ``cti_sys<N>`` CTIs are general system infrastructure CTIs that > > The > > > +can be associated with other CoreSight devices, or other system hardware > > +capable of generating or using trigger signals.:: > > + > > + >$ ls /sys/bus/coresight/devices/etm0/cti_cpu0 > > + channels ctmid enable nr_trigger_cons mgmt power regs subsystem > > + triggers0 triggers1 uevent > > + > > +*Key file items are:-* > > + * ``enable``: enables/disables the CTI. > > + * ``ctmid`` : associated CTM - only relevant if system has multiple CTI+CTM > > + clusters that are not interconnected. > > + * ``nr_trigger_cons`` : total connections - triggers<N> directories. > > + > > +*Sub-directories:-* > > + * ``triggers<N>``: contains list of triggers for an individual connection. > > + * ``channels``: Contains the channel API - CTI main programming interface. > > + * ``regs``: Gives access to the raw programmable CTI regs. > > + * ``mgmt``: the standard CoreSight management registers. > > + > > + > > +triggers<N> directories > > +~~~~~~~~~~~~~~~~~~~~~~~ > > + > > +Individual trigger connection information. This describes trigger signals for > > +CoreSight and non-CoreSight connections. > > + > > +Each triggers directory has a set of parameters describing the triggers for > > +the connection. > > + > > + * ``name`` : name of connection > > + * ``in_signals`` : input trigger signal indexes used in this connection. > > + * ``in_types`` : functional types for in signals. > > + * ``out_signals`` : output trigger signals for this connection. > > + * ``out_types`` : functional types for out signals. > > + > > +e.g:: > > + > > + >$ ls ./cti_cpu0/triggers0/ > > + in_signals in_types name out_signals out_types > > + >$ cat ./cti_cpu0/triggers0/name > > + cpu0 > > + >$ cat ./cti_cpu0/triggers0/out_signals > > + 0-2 > > + >$ cat ./cti_cpu0/triggers0/out_types > > + pe_edbgreq pe_dbgrestart pe_ctiirq > > + >$ cat ./cti_cpu0/triggers0/in_signals > > + 0-1 > > + >$ cat ./cti_cpu0/triggers0/in_types > > + pe_dbgtrigger pe_pmuirq > > + > > +If a connection has zero signals in either the 'in' or 'out' triggers then > > +those parameters will be omitted. > > + > > +Channels API Directory > > +~~~~~~~~~~~~~~~~~~~~~~ > > + > > +This provides an easy way to attach triggers to channels, without needing > > +the multiple register operations that are required if manipulating the > > +'regs' sub-dir elements directly. > > spell out: sub-directory > > > + > > +A number of files provide this API:: > > + > > + >$ ls ./cti_sys0/channels/ > > + chan_clear chan_inuse chan_xtrigs_view trigin_detach > > + chan_free chan_pulse chan_xtrigs_view_sel trigout_attach > > + chan_gate_disable chan_set trig_filter_enable trigout_detach > > + chan_gate_enable chan_xtrigs_reset trigin_attach trigout_filtered > > + > > +Most access to these elements take the form:: > > + > > + echo <chan> [<trigger>] > /<device_path>/<operation> > > + > > +where the optional <trigger> is only needed for trigXX_attach | detach > > +operations. > > + > > +e.g.:: > > + > > + >$ echo 0 1 > ./cti_sys0/channels/trigout_attach > > + >$ echo 0 > ./cti_sys0/channels/chan_set > > + > > +Attaches trigout(1) to channel(0), then activates channel(0) generating a > > +set state on cti_sys0.trigout(1) > > + > > + > > +*API operations* > > + > > + * ``trigin_attach, trigout_attach``: Attach a channel to a trigger signal. > > + * ``trigin_detach, trigout_detach``: Detach a channel from a trigger signal. > > + * ``chan_set``: Set the channel - the set state will be propagated around > > + the CTM to other connected devices. > > + * ``chan_clear``: Clear the channel. > > + * ``chan_pulse``: Set the channel for a single CoreSight clock cycle. > > + * ``chan_gate_enable``: Write operation sets the CTI gate to propagate > > + (enable) the channel to other devices. This operation takes a channel > > + number. CTI gate is enabled for all channels by default at power up. Read > > + to list the currently enabled channels on the gate. > > + * ``chan_gate_disable``: Write channel number to disable gate for that > > + channel. > > + * ``chan_inuse``: Show the current channels attached to any signal > > + * ``chan_free``: Show channels with no attached signals. > > + * ``chan_xtrig_view``: write a channel number to select a channel to view, > > + read to show the cross triggers programmed for the selected channel. > > + * ``trig_filter_enable``: Defaults to enabled, disable to allow potentially > > + dangerous output signals to be set. > > + * ``trigout_filtered``: Trigger out signals that are prevented from being > > + set if filtering ``trig_filter_enable`` is enabled. One use is to prevent > > + accidental ``EDBGREQ`` signals stopping a core. > > + * ``chan_xtrigs_reset``: Write 1 to clear all channel / trigger programming. > > + Resets device hardware to default state. > > + > > + > > +The example below attaches input trigger index 1 to channel 2, and output > > +trigger index 6 to the same channel. It then examines the state of the > > +channel / trigger connections using the appropriate sysfs attributes. > > + > > +The settings mean that if either input trigger 1, or channel 2 go active then > > +trigger out 6 will go active. We then enable the CTI, and use the software > > +channel control to activate channel 2. We see the active channel on the > > +``choutstatus`` register and the active signal on the ``trigoutstatus`` > > +register. Finally clearing the channel removes this. > > + > > +e.g.:: > > + > > + .../cti_sys0/channels# echo 2 1 > trigin_attach > > + .../cti_sys0/channels# echo 2 6 > trigout_attach > > + .../cti_sys0/channels# cat chan_free > > + 0-1,3 > > + .../cti_sys0/channels# cat chan_inuse > > + 2 > > + .../cti_sys0/channels# echo 2 > chan_xtrigs_view > > + .../cti_sys0/channels# cat chan_xtrigs_view > > + [2] IN: 1 OUT: 6 > > + .../cti_sys0/# echo 1 > enable > > + .../cti_sys0/channels# echo 2 > chan_set > > + .../cti_sys0/channels# cat ../regs/choutstatus > > + 0x4 > > + .../cti_sys0/channels# cat ../regs/trigoutstatus > > + 0x40 > > + .../cti_sys0/channels# echo 2 > chan_clear > > + .../cti_sys0/channels# cat ../regs/trigoutstatus > > + 0x0 > > + .../cti_sys0/channels# cat ../regs/choutstatus > > + 0x0 > > > Reviewed-by: Randy Dunlap <rdunlap@infradead.org> > > thanks. > -- > ~Randy >
diff --git a/Documentation/trace/coresight/coresight-ect.rst b/Documentation/trace/coresight/coresight-ect.rst new file mode 100644 index 000000000000..3e06588f24fa --- /dev/null +++ b/Documentation/trace/coresight/coresight-ect.rst @@ -0,0 +1,211 @@ +============================================= +CoreSight Embedded Cross Trigger (CTI & CTM). +============================================= + + :Author: Mike Leach <mike.leach@linaro.org> + :Date: November 2019 + +Hardware Description +-------------------- + +The CoreSight Cross Trigger Interface (CTI) is a hardware device that takes +individual input and output hardware signals known as triggers to and from +devices and interconnects them via the Cross Trigger Matrix (CTM) to other +devices via numbered channels, in order to propagate events between devices. + +e.g.:: + + 0000000 in_trigs ::::::: + 0 C 0----------->: : +======>(other CTI channel IO) + 0 P 0<-----------: : v + 0 U 0 out_trigs : : Channels ***** ::::::: + 0000000 : CTI :<=========>*CTM*<====>: CTI :---+ + ####### in_trigs : : (id 0-3) ***** ::::::: v + # ETM #----------->: : ^ ####### + # #<-----------: : +---# ETR # + ####### out_trigs ::::::: ####### + +The CTI driver enables the programming of the CTI to attach triggers to +channels. When an input trigger becomes active, the attached channel will +become active. Any output trigger attached to that channel will also +become active. The active channel is propagated to other CTIs via the CTM, +activating connected output triggers there, unless filtered by the CTI +channel gate. + +It is also possible to activate a channel using system software directly +programming registers in the CTI. + +The CTIs are registered by the system to be associated with CPUs and/or other +CoreSight devices on the trace data path. When these devices are enabled the +attached CTIs will also be enabled. By default/on power up the CTIs have +no programmed trigger/channel attachments, so will not affect the system +until explicitly programmed. + +The hardware trigger connections between CTIs and devices is implementation +defined, unless the CPU/ETM combination is a v8 architecture, in which case +the connections have an architecturally defined standard layout. + +The hardware trigger signals can also be connected to non-CoreSight devices +(e.g. UART), or be propagated off chip as hardware IO lines. + +All the CTI devices are associated with a CTM. On many systems there will be a +single effective CTM (one CTM, or multiple CTMs all interconnected), but it is +possible that systems can have nets of CTIs+CTM that are not interconnected by +a CTM to each other. On these systems a CTM index is declared to associate +CTI devices that are interconnected via a given CTM. + +Sysfs files and directories +--------------------------- + +The CTI devices appear on the existing CoreSight bus alongside the other +CoreSight devices:: + + >$ ls /sys/bus/coresight/devices + cti_cpu0 cti_cpu2 cti_sys0 etm0 etm2 funnel0 replicator0 tmc_etr0 + cti_cpu1 cti_cpu3 cti_sys1 etm1 etm3 funnel1 tmc_etf0 tpiu0 + +The ``cti_cpu<N>`` named CTIs are associated with a CPU, and any ETM used by +that core. the ``cti_sys<N>`` CTIs are general system infrastructure CTIs that +can be associated with other CoreSight devices, or other system hardware +capable of generating or using trigger signals.:: + + >$ ls /sys/bus/coresight/devices/etm0/cti_cpu0 + channels ctmid enable nr_trigger_cons mgmt power regs subsystem + triggers0 triggers1 uevent + +*Key file items are:-* + * ``enable``: enables/disables the CTI. + * ``ctmid`` : associated CTM - only relevant if system has multiple CTI+CTM + clusters that are not interconnected. + * ``nr_trigger_cons`` : total connections - triggers<N> directories. + +*Sub-directories:-* + * ``triggers<N>``: contains list of triggers for an individual connection. + * ``channels``: Contains the channel API - CTI main programming interface. + * ``regs``: Gives access to the raw programmable CTI regs. + * ``mgmt``: the standard CoreSight management registers. + + +triggers<N> directories +~~~~~~~~~~~~~~~~~~~~~~~ + +Individual trigger connection information. This describes trigger signals for +CoreSight and non-CoreSight connections. + +Each triggers directory has a set of parameters describing the triggers for +the connection. + + * ``name`` : name of connection + * ``in_signals`` : input trigger signal indexes used in this connection. + * ``in_types`` : functional types for in signals. + * ``out_signals`` : output trigger signals for this connection. + * ``out_types`` : functional types for out signals. + +e.g:: + + >$ ls ./cti_cpu0/triggers0/ + in_signals in_types name out_signals out_types + >$ cat ./cti_cpu0/triggers0/name + cpu0 + >$ cat ./cti_cpu0/triggers0/out_signals + 0-2 + >$ cat ./cti_cpu0/triggers0/out_types + pe_edbgreq pe_dbgrestart pe_ctiirq + >$ cat ./cti_cpu0/triggers0/in_signals + 0-1 + >$ cat ./cti_cpu0/triggers0/in_types + pe_dbgtrigger pe_pmuirq + +If a connection has zero signals in either the 'in' or 'out' triggers then +those parameters will be omitted. + +Channels API Directory +~~~~~~~~~~~~~~~~~~~~~~ + +This provides an easy way to attach triggers to channels, without needing +the multiple register operations that are required if manipulating the +'regs' sub-dir elements directly. + +A number of files provide this API:: + + >$ ls ./cti_sys0/channels/ + chan_clear chan_inuse chan_xtrigs_view trigin_detach + chan_free chan_pulse chan_xtrigs_view_sel trigout_attach + chan_gate_disable chan_set trig_filter_enable trigout_detach + chan_gate_enable chan_xtrigs_reset trigin_attach trigout_filtered + +Most access to these elements take the form:: + + echo <chan> [<trigger>] > /<device_path>/<operation> + +where the optional <trigger> is only needed for trigXX_attach | detach +operations. + +e.g.:: + + >$ echo 0 1 > ./cti_sys0/channels/trigout_attach + >$ echo 0 > ./cti_sys0/channels/chan_set + +Attaches trigout(1) to channel(0), then activates channel(0) generating a +set state on cti_sys0.trigout(1) + + +*API operations* + + * ``trigin_attach, trigout_attach``: Attach a channel to a trigger signal. + * ``trigin_detach, trigout_detach``: Detach a channel from a trigger signal. + * ``chan_set``: Set the channel - the set state will be propagated around + the CTM to other connected devices. + * ``chan_clear``: Clear the channel. + * ``chan_pulse``: Set the channel for a single CoreSight clock cycle. + * ``chan_gate_enable``: Write operation sets the CTI gate to propagate + (enable) the channel to other devices. This operation takes a channel + number. CTI gate is enabled for all channels by default at power up. Read + to list the currently enabled channels on the gate. + * ``chan_gate_disable``: Write channel number to disable gate for that + channel. + * ``chan_inuse``: Show the current channels attached to any signal + * ``chan_free``: Show channels with no attached signals. + * ``chan_xtrig_view``: write a channel number to select a channel to view, + read to show the cross triggers programmed for the selected channel. + * ``trig_filter_enable``: Defaults to enabled, disable to allow potentially + dangerous output signals to be set. + * ``trigout_filtered``: Trigger out signals that are prevented from being + set if filtering ``trig_filter_enable`` is enabled. One use is to prevent + accidental ``EDBGREQ`` signals stopping a core. + * ``chan_xtrigs_reset``: Write 1 to clear all channel / trigger programming. + Resets device hardware to default state. + + +The example below attaches input trigger index 1 to channel 2, and output +trigger index 6 to the same channel. It then examines the state of the +channel / trigger connections using the appropriate sysfs attributes. + +The settings mean that if either input trigger 1, or channel 2 go active then +trigger out 6 will go active. We then enable the CTI, and use the software +channel control to activate channel 2. We see the active channel on the +``choutstatus`` register and the active signal on the ``trigoutstatus`` +register. Finally clearing the channel removes this. + +e.g.:: + + .../cti_sys0/channels# echo 2 1 > trigin_attach + .../cti_sys0/channels# echo 2 6 > trigout_attach + .../cti_sys0/channels# cat chan_free + 0-1,3 + .../cti_sys0/channels# cat chan_inuse + 2 + .../cti_sys0/channels# echo 2 > chan_xtrigs_view + .../cti_sys0/channels# cat chan_xtrigs_view + [2] IN: 1 OUT: 6 + .../cti_sys0/# echo 1 > enable + .../cti_sys0/channels# echo 2 > chan_set + .../cti_sys0/channels# cat ../regs/choutstatus + 0x4 + .../cti_sys0/channels# cat ../regs/trigoutstatus + 0x40 + .../cti_sys0/channels# echo 2 > chan_clear + .../cti_sys0/channels# cat ../regs/trigoutstatus + 0x0 + .../cti_sys0/channels# cat ../regs/choutstatus + 0x0 diff --git a/Documentation/trace/coresight/coresight.rst b/Documentation/trace/coresight/coresight.rst index a566719f8e7e..108600ee1e12 100644 --- a/Documentation/trace/coresight/coresight.rst +++ b/Documentation/trace/coresight/coresight.rst @@ -491,8 +491,21 @@ interface provided for that purpose by the generic STM API:: Details on how to use the generic STM API can be found here:- :doc:`../stm` [#second]_. +The CTI & CTM Modules +--------------------- + +The CTI (Cross Trigger Interface) provides a set of trigger signals between +individual CTIs and components, and can propagate these between all CTIs via +channels on the CTM (Cross Trigger Matrix). + +A separate documentation file is provided to explain the use of these devices. +(:doc:`coresight-ect`) [#fourth]_. + + .. [#first] Documentation/ABI/testing/sysfs-bus-coresight-devices-stm .. [#second] Documentation/trace/stm.rst .. [#third] https://github.com/Linaro/perf-opencsd + +.. [#fourth] Documentation/trace/coresight/coresight-ect.rst