diff mbox series

[v2,5/5] app/testpmd: enable empty polls in burst stats

Message ID 20200626220943.22526-5-honnappa.nagarahalli@arm.com
State Superseded
Headers show
Series [v2,1/5] app/testpmd: clock gettime call in throughput calculation | expand

Commit Message

Honnappa Nagarahalli June 26, 2020, 10:09 p.m. UTC
The number of empty polls provides information about available
CPU head room in the presence of continuous polling.

Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>

Reviewed-by: Phil Yang <phil.yang@arm.com>

Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>

Tested-by: Phil Yang <phil.yang@arm.com>

Tested-by: Ali Alnubani <alialnu@mellanox.com>

---
 app/test-pmd/csumonly.c |  5 +--
 app/test-pmd/icmpecho.c |  6 ++--
 app/test-pmd/iofwd.c    |  6 ++--
 app/test-pmd/macfwd.c   |  6 ++--
 app/test-pmd/macswap.c  |  6 ++--
 app/test-pmd/rxonly.c   |  6 ++--
 app/test-pmd/testpmd.c  | 74 ++++++++++++++++++++++++-----------------
 7 files changed, 61 insertions(+), 48 deletions(-)

-- 
2.17.1

Comments

Ferruh Yigit July 6, 2020, 5:05 p.m. UTC | #1
On 6/26/2020 11:09 PM, Honnappa Nagarahalli wrote:
> The number of empty polls provides information about available

> CPU head room in the presence of continuous polling.


+1 to have it, it can be useful.

> 

> Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>

> Reviewed-by: Phil Yang <phil.yang@arm.com>

> Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>

> Tested-by: Phil Yang <phil.yang@arm.com>

> Tested-by: Ali Alnubani <alialnu@mellanox.com>


<...>

>  	/*

>  	 * First compute the total number of packet bursts and the

>  	 * two highest numbers of bursts of the same number of packets.

>  	 */

>  	total_burst = 0;

> -	burst_stats[0] = burst_stats[1] = burst_stats[2] = 0;

> -	pktnb_stats[0] = pktnb_stats[1] = pktnb_stats[2] = 0;

> +	memset(&burst_stats, 0x0, sizeof(burst_stats));

> +	memset(&pktnb_stats, 0x0, sizeof(pktnb_stats));

> +

>  	for (nb_pkt = 0; nb_pkt < MAX_PKT_BURST; nb_pkt++) {

>  		nb_burst = pbs->pkt_burst_spread[nb_pkt];

> -		if (nb_burst == 0)

> -			continue;

>  		total_burst += nb_burst;

> -		if (nb_burst > burst_stats[0]) {

> -			burst_stats[1] = burst_stats[0];

> -			pktnb_stats[1] = pktnb_stats[0];

> +

> +		/* Show empty poll stats always */

> +		if (nb_pkt == 0) {

>  			burst_stats[0] = nb_burst;

>  			pktnb_stats[0] = nb_pkt;


just a minor issue but this assignment is not needed.

> -		} else if (nb_burst > burst_stats[1]) {

> +			continue;

> +		}

> +

> +		if (nb_burst == 0)

> +			continue;


again another minor issue, can have this check above 'nb_pkt == 0', to prevent
unnecssary "burst_stats[0] = nb_burst;" assignment if "nb_burst == 0".

<...>

Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Honnappa Nagarahalli July 6, 2020, 7:11 p.m. UTC | #2
Hi Ferruh,
	Thanks for the review comments

<snip>

> Subject: Re: [PATCH v2 5/5] app/testpmd: enable empty polls in burst stats

> 

> On 6/26/2020 11:09 PM, Honnappa Nagarahalli wrote:

> > The number of empty polls provides information about available CPU

> > head room in the presence of continuous polling.

> 

> +1 to have it, it can be useful.

> 

> >

> > Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>

> > Reviewed-by: Phil Yang <phil.yang@arm.com>

> > Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>

> > Tested-by: Phil Yang <phil.yang@arm.com>

> > Tested-by: Ali Alnubani <alialnu@mellanox.com>

> 

> <...>

> 

> >  	/*

> >  	 * First compute the total number of packet bursts and the

> >  	 * two highest numbers of bursts of the same number of packets.

> >  	 */

> >  	total_burst = 0;

> > -	burst_stats[0] = burst_stats[1] = burst_stats[2] = 0;

> > -	pktnb_stats[0] = pktnb_stats[1] = pktnb_stats[2] = 0;

> > +	memset(&burst_stats, 0x0, sizeof(burst_stats));

> > +	memset(&pktnb_stats, 0x0, sizeof(pktnb_stats));

> > +

> >  	for (nb_pkt = 0; nb_pkt < MAX_PKT_BURST; nb_pkt++) {

> >  		nb_burst = pbs->pkt_burst_spread[nb_pkt];

> > -		if (nb_burst == 0)

> > -			continue;

> >  		total_burst += nb_burst;

> > -		if (nb_burst > burst_stats[0]) {

> > -			burst_stats[1] = burst_stats[0];

> > -			pktnb_stats[1] = pktnb_stats[0];

> > +

> > +		/* Show empty poll stats always */

> > +		if (nb_pkt == 0) {

> >  			burst_stats[0] = nb_burst;

> >  			pktnb_stats[0] = nb_pkt;

> 

> just a minor issue but this assignment is not needed.

The empty poll stats are being shown always (even if there were no empty polls). The check 'nb_pkts == 0' indicates that the burst stats are for empty polls. Hence this assignment is required. But, this can be moved out of the loop to provide clarity. I will do that.

> 

> > -		} else if (nb_burst > burst_stats[1]) {

> > +			continue;

> > +		}

> > +

> > +		if (nb_burst == 0)

> > +			continue;

> 

> again another minor issue, can have this check above 'nb_pkt == 0', to prevent

> unnecssary "burst_stats[0] = nb_burst;" assignment if "nb_burst == 0".

The empty polls are always shown, even if there were 0% empty polls.

> 

> <...>

> 

> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Ferruh Yigit July 7, 2020, 9:32 a.m. UTC | #3
On 7/6/2020 8:11 PM, Honnappa Nagarahalli wrote:
> Hi Ferruh,

> 	Thanks for the review comments

> 

> <snip>

> 

>> Subject: Re: [PATCH v2 5/5] app/testpmd: enable empty polls in burst stats

>>

>> On 6/26/2020 11:09 PM, Honnappa Nagarahalli wrote:

>>> The number of empty polls provides information about available CPU

>>> head room in the presence of continuous polling.

>>

>> +1 to have it, it can be useful.

>>

>>>

>>> Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>

>>> Reviewed-by: Phil Yang <phil.yang@arm.com>

>>> Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>

>>> Tested-by: Phil Yang <phil.yang@arm.com>

>>> Tested-by: Ali Alnubani <alialnu@mellanox.com>

>>

>> <...>

>>

>>>  	/*

>>>  	 * First compute the total number of packet bursts and the

>>>  	 * two highest numbers of bursts of the same number of packets.

>>>  	 */

>>>  	total_burst = 0;

>>> -	burst_stats[0] = burst_stats[1] = burst_stats[2] = 0;

>>> -	pktnb_stats[0] = pktnb_stats[1] = pktnb_stats[2] = 0;

>>> +	memset(&burst_stats, 0x0, sizeof(burst_stats));

>>> +	memset(&pktnb_stats, 0x0, sizeof(pktnb_stats));

>>> +

>>>  	for (nb_pkt = 0; nb_pkt < MAX_PKT_BURST; nb_pkt++) {

>>>  		nb_burst = pbs->pkt_burst_spread[nb_pkt];

>>> -		if (nb_burst == 0)

>>> -			continue;

>>>  		total_burst += nb_burst;

>>> -		if (nb_burst > burst_stats[0]) {

>>> -			burst_stats[1] = burst_stats[0];

>>> -			pktnb_stats[1] = pktnb_stats[0];

>>> +

>>> +		/* Show empty poll stats always */

>>> +		if (nb_pkt == 0) {

>>>  			burst_stats[0] = nb_burst;

>>>  			pktnb_stats[0] = nb_pkt;

>>

>> just a minor issue but this assignment is not needed.

> The empty poll stats are being shown always (even if there were no empty polls). The check 'nb_pkts == 0' indicates that the burst stats are for empty polls. Hence this assignment is required. But, this can be moved out of the loop to provide clarity. I will do that.


It is not required because of 'memset' above, we know 'nb_pkt == 0' and we know
'pktnb_stats[0] == 0', so "pktnb_stats[0] = nb_pkt;" is redundant.

> 

>>

>>> -		} else if (nb_burst > burst_stats[1]) {

>>> +			continue;

>>> +		}

>>> +

>>> +		if (nb_burst == 0)

>>> +			continue;

>>

>> again another minor issue, can have this check above 'nb_pkt == 0', to prevent

>> unnecssary "burst_stats[0] = nb_burst;" assignment if "nb_burst == 0".

> The empty polls are always shown, even if there were 0% empty polls.


I got that, again because of memset, "burst_stats[0] == 0", you can skip
"burst_stats[0] = nb_burst;" in case "nb_burst == 0", that is why you can move
it up.

Anyway, both are trivial issues ...

> 

>>

>> <...>

>>

>> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
diff mbox series

Patch

diff --git a/app/test-pmd/csumonly.c b/app/test-pmd/csumonly.c
index 862622379..0a96b24eb 100644
--- a/app/test-pmd/csumonly.c
+++ b/app/test-pmd/csumonly.c
@@ -802,11 +802,12 @@  pkt_burst_checksum_forward(struct fwd_stream *fs)
 	/* receive a burst of packet */
 	nb_rx = rte_eth_rx_burst(fs->rx_port, fs->rx_queue, pkts_burst,
 				 nb_pkt_per_burst);
-	if (unlikely(nb_rx == 0))
-		return;
 #ifdef RTE_TEST_PMD_RECORD_BURST_STATS
 	fs->rx_burst_stats.pkt_burst_spread[nb_rx]++;
 #endif
+	if (unlikely(nb_rx == 0))
+		return;
+
 	fs->rx_packets += nb_rx;
 	rx_bad_ip_csum = 0;
 	rx_bad_l4_csum = 0;
diff --git a/app/test-pmd/icmpecho.c b/app/test-pmd/icmpecho.c
index 65aece16c..78e3adf2c 100644
--- a/app/test-pmd/icmpecho.c
+++ b/app/test-pmd/icmpecho.c
@@ -308,12 +308,12 @@  reply_to_icmp_echo_rqsts(struct fwd_stream *fs)
 	 */
 	nb_rx = rte_eth_rx_burst(fs->rx_port, fs->rx_queue, pkts_burst,
 				 nb_pkt_per_burst);
-	if (unlikely(nb_rx == 0))
-		return;
-
 #ifdef RTE_TEST_PMD_RECORD_BURST_STATS
 	fs->rx_burst_stats.pkt_burst_spread[nb_rx]++;
 #endif
+	if (unlikely(nb_rx == 0))
+		return;
+
 	fs->rx_packets += nb_rx;
 	nb_replies = 0;
 	for (i = 0; i < nb_rx; i++) {
diff --git a/app/test-pmd/iofwd.c b/app/test-pmd/iofwd.c
index 9dce76efe..22b59bbda 100644
--- a/app/test-pmd/iofwd.c
+++ b/app/test-pmd/iofwd.c
@@ -66,13 +66,13 @@  pkt_burst_io_forward(struct fwd_stream *fs)
 	 */
 	nb_rx = rte_eth_rx_burst(fs->rx_port, fs->rx_queue,
 			pkts_burst, nb_pkt_per_burst);
+#ifdef RTE_TEST_PMD_RECORD_BURST_STATS
+	fs->rx_burst_stats.pkt_burst_spread[nb_rx]++;
+#endif
 	if (unlikely(nb_rx == 0))
 		return;
 	fs->rx_packets += nb_rx;
 
-#ifdef RTE_TEST_PMD_RECORD_BURST_STATS
-	fs->rx_burst_stats.pkt_burst_spread[nb_rx]++;
-#endif
 	nb_tx = rte_eth_tx_burst(fs->tx_port, fs->tx_queue,
 			pkts_burst, nb_rx);
 	/*
diff --git a/app/test-pmd/macfwd.c b/app/test-pmd/macfwd.c
index d2ebb1105..0a89d94be 100644
--- a/app/test-pmd/macfwd.c
+++ b/app/test-pmd/macfwd.c
@@ -71,12 +71,12 @@  pkt_burst_mac_forward(struct fwd_stream *fs)
 	 */
 	nb_rx = rte_eth_rx_burst(fs->rx_port, fs->rx_queue, pkts_burst,
 				 nb_pkt_per_burst);
-	if (unlikely(nb_rx == 0))
-		return;
-
 #ifdef RTE_TEST_PMD_RECORD_BURST_STATS
 	fs->rx_burst_stats.pkt_burst_spread[nb_rx]++;
 #endif
+	if (unlikely(nb_rx == 0))
+		return;
+
 	fs->rx_packets += nb_rx;
 	txp = &ports[fs->tx_port];
 	tx_offloads = txp->dev_conf.txmode.offloads;
diff --git a/app/test-pmd/macswap.c b/app/test-pmd/macswap.c
index 8428c26d8..fbe8cb39e 100644
--- a/app/test-pmd/macswap.c
+++ b/app/test-pmd/macswap.c
@@ -72,12 +72,12 @@  pkt_burst_mac_swap(struct fwd_stream *fs)
 	 */
 	nb_rx = rte_eth_rx_burst(fs->rx_port, fs->rx_queue, pkts_burst,
 				 nb_pkt_per_burst);
-	if (unlikely(nb_rx == 0))
-		return;
-
 #ifdef RTE_TEST_PMD_RECORD_BURST_STATS
 	fs->rx_burst_stats.pkt_burst_spread[nb_rx]++;
 #endif
+	if (unlikely(nb_rx == 0))
+		return;
+
 	fs->rx_packets += nb_rx;
 	txp = &ports[fs->tx_port];
 
diff --git a/app/test-pmd/rxonly.c b/app/test-pmd/rxonly.c
index 5c65fc42d..18d59a68d 100644
--- a/app/test-pmd/rxonly.c
+++ b/app/test-pmd/rxonly.c
@@ -63,12 +63,12 @@  pkt_burst_receive(struct fwd_stream *fs)
 	 */
 	nb_rx = rte_eth_rx_burst(fs->rx_port, fs->rx_queue, pkts_burst,
 				 nb_pkt_per_burst);
-	if (unlikely(nb_rx == 0))
-		return;
-
 #ifdef RTE_TEST_PMD_RECORD_BURST_STATS
 	fs->rx_burst_stats.pkt_burst_spread[nb_rx]++;
 #endif
+	if (unlikely(nb_rx == 0))
+		return;
+
 	fs->rx_packets += nb_rx;
 	for (i = 0; i < nb_rx; i++)
 		rte_pktmbuf_free(pkts_burst[i]);
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 2e1493da2..9075143b7 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -1692,57 +1692,69 @@  init_fwd_streams(void)
 static void
 pkt_burst_stats_display(const char *rx_tx, struct pkt_burst_stats *pbs)
 {
-	uint64_t total_burst;
+	uint64_t total_burst, sburst;
 	uint64_t nb_burst;
-	uint64_t burst_stats[3];
-	uint16_t pktnb_stats[3];
+	uint64_t burst_stats[4];
+	uint16_t pktnb_stats[4];
 	uint16_t nb_pkt;
-	int burst_percent[3];
+	int burst_percent[4], sburstp;
+	int i;
 
 	/*
 	 * First compute the total number of packet bursts and the
 	 * two highest numbers of bursts of the same number of packets.
 	 */
 	total_burst = 0;
-	burst_stats[0] = burst_stats[1] = burst_stats[2] = 0;
-	pktnb_stats[0] = pktnb_stats[1] = pktnb_stats[2] = 0;
+	memset(&burst_stats, 0x0, sizeof(burst_stats));
+	memset(&pktnb_stats, 0x0, sizeof(pktnb_stats));
+
 	for (nb_pkt = 0; nb_pkt < MAX_PKT_BURST; nb_pkt++) {
 		nb_burst = pbs->pkt_burst_spread[nb_pkt];
-		if (nb_burst == 0)
-			continue;
 		total_burst += nb_burst;
-		if (nb_burst > burst_stats[0]) {
-			burst_stats[1] = burst_stats[0];
-			pktnb_stats[1] = pktnb_stats[0];
+
+		/* Show empty poll stats always */
+		if (nb_pkt == 0) {
 			burst_stats[0] = nb_burst;
 			pktnb_stats[0] = nb_pkt;
-		} else if (nb_burst > burst_stats[1]) {
+			continue;
+		}
+
+		if (nb_burst == 0)
+			continue;
+
+		if (nb_burst > burst_stats[1]) {
+			burst_stats[2] = burst_stats[1];
+			pktnb_stats[2] = pktnb_stats[1];
 			burst_stats[1] = nb_burst;
 			pktnb_stats[1] = nb_pkt;
+		} else if (nb_burst > burst_stats[2]) {
+			burst_stats[2] = nb_burst;
+			pktnb_stats[2] = nb_pkt;
 		}
 	}
 	if (total_burst == 0)
 		return;
-	burst_percent[0] = (double)burst_stats[0] / total_burst * 100;
-	printf("  %s-bursts : %"PRIu64" [%d%% of %d pkts", rx_tx, total_burst,
-	       burst_percent[0], (int) pktnb_stats[0]);
-	if (burst_stats[0] == total_burst) {
-		printf("]\n");
-		return;
-	}
-	if (burst_stats[0] + burst_stats[1] == total_burst) {
-		printf(" + %d%% of %d pkts]\n",
-		       100 - burst_percent[0], pktnb_stats[1]);
-		return;
-	}
-	burst_percent[1] = (double)burst_stats[1] / total_burst * 100;
-	burst_percent[2] = 100 - (burst_percent[0] + burst_percent[1]);
-	if ((burst_percent[1] == 0) || (burst_percent[2] == 0)) {
-		printf(" + %d%% of others]\n", 100 - burst_percent[0]);
-		return;
+
+	printf("  %s-bursts : %"PRIu64" [", rx_tx, total_burst);
+	for (i = 0, sburst = 0, sburstp = 0; i < 4; i++) {
+		if (i == 3) {
+			printf("%d%% of other]\n", 100 - sburstp);
+			return;
+		}
+
+		sburst += burst_stats[i];
+		if (sburst == total_burst) {
+			printf("%d%% of %d pkts]\n",
+				100 - sburstp, (int) pktnb_stats[i]);
+			return;
+		}
+
+		burst_percent[i] =
+			(double)burst_stats[i] / total_burst * 100;
+		printf("%d%% of %d pkts + ",
+			burst_percent[i], (int) pktnb_stats[i]);
+		sburstp += burst_percent[i];
 	}
-	printf(" + %d%% of %d pkts + %d%% of others]\n",
-	       burst_percent[1], (int) pktnb_stats[1], burst_percent[2]);
 }
 #endif /* RTE_TEST_PMD_RECORD_BURST_STATS */