deleted file mode 100644
@@ -1,48 +0,0 @@
-* Marvell PXA GPIO controller
-
-Required properties:
-- compatible : Should be "intel,pxa25x-gpio", "intel,pxa26x-gpio",
- "intel,pxa27x-gpio", "intel,pxa3xx-gpio",
- "marvell,pxa93x-gpio", "marvell,mmp-gpio",
- "marvell,mmp2-gpio" or marvell,pxa1928-gpio.
-- reg : Address and length of the register set for the device
-- interrupts : Should be the port interrupt shared by all gpio pins.
- There're three gpio interrupts in arch-pxa, and they're gpio0,
- gpio1 and gpio_mux. There're only one gpio interrupt in arch-mmp,
- gpio_mux.
-- interrupt-names : Should be the names of irq resources. Each interrupt
- uses its own interrupt name, so there should be as many interrupt names
- as referenced interrupts.
-- interrupt-controller : Identifies the node as an interrupt controller.
-- #interrupt-cells: Specifies the number of cells needed to encode an
- interrupt source.
-- gpio-controller : Marks the device node as a gpio controller.
-- #gpio-cells : Should be two. The first cell is the pin number and
- the second cell is used to specify flags. See gpio.txt for possible
- values.
-
-Example for a MMP platform:
-
- gpio: gpio@d4019000 {
- compatible = "marvell,mmp-gpio";
- reg = <0xd4019000 0x1000>;
- interrupts = <49>;
- interrupt-names = "gpio_mux";
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <1>;
- };
-
-Example for a PXA3xx platform:
-
- gpio: gpio@40e00000 {
- compatible = "intel,pxa3xx-gpio";
- reg = <0x40e00000 0x10000>;
- interrupt-names = "gpio0", "gpio1", "gpio_mux";
- interrupts = <8 9 10>;
- gpio-controller;
- #gpio-cells = <0x2>;
- interrupt-controller;
- #interrupt-cells = <0x2>;
- };
new file mode 100644
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/mrvl-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell PXA GPIO controller
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+ - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+ - Rob Herring <robh+dt@kernel.org>
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - intel,pxa25x-gpio
+ - intel,pxa26x-gpio
+ - intel,pxa27x-gpio
+ - intel,pxa3xx-gpio
+ then:
+ properties:
+ interrupts:
+ minItems: 3
+ maxItems: 3
+ interrupt-names:
+ items:
+ - const: gpio0
+ - const: gpio1
+ - const: gpio_mux
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - marvell,mmp-gpio
+ - marvell,mmp2-gpio
+ then:
+ properties:
+ interrupts:
+ maxItems: 1
+ interrupt-names:
+ items:
+ - const: gpio_mux
+
+properties:
+ $nodename:
+ pattern: '^gpio@[0-9a-f]+$'
+
+ compatible:
+ enum:
+ - intel,pxa25x-gpio
+ - intel,pxa26x-gpio
+ - intel,pxa27x-gpio
+ - intel,pxa3xx-gpio
+ - marvell,mmp-gpio
+ - marvell,mmp2-gpio
+ - marvell,pxa93x-gpio
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ ranges: true
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ interrupts: true
+
+ interrupt-names: true
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+patternProperties:
+ '^gpio@[0-9a-f]*$':
+ type: object
+ properties:
+ reg:
+ maxItems: 1
+
+ required:
+ - reg
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - '#address-cells'
+ - '#size-cells'
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+ - interrupts
+ - interrupt-names
+ - interrupt-controller
+ - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/pxa-clock.h>
+ gpio@40e00000 {
+ compatible = "intel,pxa3xx-gpio";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x40e00000 0x10000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <8>, <9>, <10>;
+ interrupt-names = "gpio0", "gpio1", "gpio_mux";
+ clocks = <&clks CLK_GPIO>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ - |
+ #include <dt-bindings/clock/marvell,pxa910.h>
+ gpio@d4019000 {
+ compatible = "marvell,mmp-gpio";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xd4019000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <49>;
+ interrupt-names = "gpio_mux";
+ clocks = <&soc_clocks PXA910_CLK_GPIO>;
+ resets = <&soc_clocks PXA910_CLK_GPIO>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ranges;
+
+ gpio@d4019000 {
+ reg = <0xd4019000 0x4>;
+ };
+
+ gpio@d4019004 {
+ reg = <0xd4019004 0x4>;
+ };
+
+ gpio@d4019008 {
+ reg = <0xd4019008 0x4>;
+ };
+
+ gpio@d4019100 {
+ reg = <0xd4019100 0x4>;
+ };
+ };
+
+...
This converts the mrvl-gpio binding to DT schema format using json-schema. Various fixes were done during the conversion, such as adding more properties that are in fact mandatory or extending the examples to include child nodes with extra GPIO blocks. The compatible strings are a mess. It is not clear why so many of them are needed; the driver doesn't really seem to differentiate between the models. Some of them, like marvell,pxa93x-gpio and marvell,pxa1928-gpio are not used at all, so it's not known how many interrupts they utilize. On the other hand, mrvl,pxa-gpio has been seen in the tree, but it doesn't end up in any actual DTB file. In any case -- the schema merely copies whatever was in the original binding document, so it's hopefully no more wrong that the original. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> --- Changes since v2: - Don't make ranges property mandatory Changes since v1: - Drop marvell,pxa1928-gpio - Drop ranges from example with no gcb child nodes - Add default GPL-2.0-only license tag - Fill in maintainers from MAINTAINERS file .../devicetree/bindings/gpio/mrvl-gpio.txt | 48 ----- .../devicetree/bindings/gpio/mrvl-gpio.yaml | 173 ++++++++++++++++++ 2 files changed, 173 insertions(+), 48 deletions(-) delete mode 100644 Documentation/devicetree/bindings/gpio/mrvl-gpio.txt create mode 100644 Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml