diff mbox series

[4/4] dt-bindings: tas2562: Convert the tas2562 binding to yaml

Message ID 20200626154143.20351-4-dmurphy@ti.com
State Superseded
Headers show
Series [1/4] ASoC: tas2562: Add right and left channel slot programming | expand

Commit Message

Dan Murphy June 26, 2020, 3:41 p.m. UTC
Convert the TAS2562 text file to yaml format.

Signed-off-by: Dan Murphy <dmurphy@ti.com>

---
 .../devicetree/bindings/sound/tas2562.txt     | 37 ---------
 .../devicetree/bindings/sound/tas2562.yaml    | 77 +++++++++++++++++++
 2 files changed, 77 insertions(+), 37 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/tas2562.txt
 create mode 100644 Documentation/devicetree/bindings/sound/tas2562.yaml

-- 
2.26.2

Comments

Rob Herring (Arm) July 15, 2020, 8:15 p.m. UTC | #1
On Fri, Jun 26, 2020 at 10:41:43AM -0500, Dan Murphy wrote:
> Convert the TAS2562 text file to yaml format.

> 

> Signed-off-by: Dan Murphy <dmurphy@ti.com>

> ---

>  .../devicetree/bindings/sound/tas2562.txt     | 37 ---------

>  .../devicetree/bindings/sound/tas2562.yaml    | 77 +++++++++++++++++++

>  2 files changed, 77 insertions(+), 37 deletions(-)

>  delete mode 100644 Documentation/devicetree/bindings/sound/tas2562.txt

>  create mode 100644 Documentation/devicetree/bindings/sound/tas2562.yaml

> 

> diff --git a/Documentation/devicetree/bindings/sound/tas2562.txt b/Documentation/devicetree/bindings/sound/tas2562.txt

> deleted file mode 100644

> index dc6d7362ded7..000000000000

> --- a/Documentation/devicetree/bindings/sound/tas2562.txt

> +++ /dev/null

> @@ -1,37 +0,0 @@

> -Texas Instruments TAS2562 Smart PA

> -

> -The TAS2562 is a mono, digital input Class-D audio amplifier optimized for

> -efficiently driving high peak power into small loudspeakers.

> -Integrated speaker voltage and current sense provides for

> -real time monitoring of loudspeaker behavior.

> -

> -Required properties:

> - - #address-cells  - Should be <1>.

> - - #size-cells     - Should be <0>.

> - - compatible:	   - Should contain "ti,tas2562", "ti,tas2563".

> - - reg:		   - The i2c address. Should be 0x4c, 0x4d, 0x4e or 0x4f.

> - - ti,imon-slot-no:- TDM TX current sense time slot.

> - - ti,vmon-slot-no:- TDM TX voltage sense time slot. This slot must always be

> -		     greater then ti,imon-slot-no.

> -

> -Optional properties:

> -- interrupt-parent: phandle to the interrupt controller which provides

> -                    the interrupt.

> -- interrupts: (GPIO) interrupt to which the chip is connected.

> -- shut-down-gpio: GPIO used to control the state of the device.

> -

> -Examples:

> -tas2562@4c {

> -        #address-cells = <1>;

> -        #size-cells = <0>;

> -        compatible = "ti,tas2562";

> -        reg = <0x4c>;

> -

> -        interrupt-parent = <&gpio1>;

> -        interrupts = <14>;

> -

> -	shut-down-gpio = <&gpio1 15 0>;

> -        ti,imon-slot-no = <0>;

> -        ti,vmon-slot-no = <1>;

> -};

> -

> diff --git a/Documentation/devicetree/bindings/sound/tas2562.yaml b/Documentation/devicetree/bindings/sound/tas2562.yaml

> new file mode 100644

> index 000000000000..1fb467e14d4c

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/sound/tas2562.yaml

> @@ -0,0 +1,77 @@

> +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)


Same licensing comment here as tas2770

> +# Copyright (C) 2019 Texas Instruments Incorporated

> +%YAML 1.2

> +---

> +$id: "http://devicetree.org/schemas/sound/tas2562.yaml#"

> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"

> +

> +title: Texas Instruments TAS2562 Smart PA

> +

> +maintainers:

> +  - Dan Murphy <dmurphy@ti.com>

> +

> +description: |

> +  The TAS2562 is a mono, digital input Class-D audio amplifier optimized for

> +  efficiently driving high peak power into small loudspeakers.

> +  Integrated speaker voltage and current sense provides for

> +  real time monitoring of loudspeaker behavior.

> +

> +properties:

> +  compatible:

> +    enum:

> +      - ti,tas2562

> +      - ti,tas2563

> +

> +  reg:

> +    maxItems: 1

> +    description: |

> +       I2C address of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f

> +

> +  shut-down-gpio:

> +    description: GPIO used to control the state of the device.

> +    deprecated: true


Why do we need this as the driver never worked?

> +

> +  shutdown-gpio:

> +    description: GPIO used to control the state of the device.


-gpios is the preferred form: shutdown-gpios

> +

> +  interrupts:

> +    maxItems: 1

> +

> +  ti,imon-slot-no:

> +    $ref: /schemas/types.yaml#/definitions/uint32

> +    description: TDM TX current sense time slot.

> +

> +  ti,vmon-slot-no:

> +    $ref: /schemas/types.yaml#/definitions/uint32

> +    description: |

> +      TDM TX voltage sense time slot.  This slot must always be greater then

> +      ti,imon-slot-no.

> +

> +  '#sound-dai-cells':

> +    const: 1

> +

> +required:

> +  - compatible

> +  - reg

> +

> +additionalProperties: false

> +

> +examples:

> +  - |

> +   #include <dt-bindings/gpio/gpio.h>

> +   i2c0 {

> +     #address-cells = <1>;

> +     #size-cells = <0>;

> +     codec: codec@4c {

> +       compatible = "ti,tas2562";

> +       reg = <0x4c>;

> +       #sound-dai-cells = <1>;

> +       interrupt-parent = <&gpio1>;

> +       interrupts = <14>;

> +       shutdown-gpio = <&gpio1 15 0>;

> +       ti,imon-slot-no = <0>;

> +       ti,vmon-slot-no = <2>;

> +     };

> +   };

> +

> +...

> -- 

> 2.26.2

>
Dan Murphy July 20, 2020, 6:22 p.m. UTC | #2
Rob

On 7/15/20 3:15 PM, Rob Herring wrote:
> On Fri, Jun 26, 2020 at 10:41:43AM -0500, Dan Murphy wrote:

>> Convert the TAS2562 text file to yaml format.

>>

>> Signed-off-by: Dan Murphy <dmurphy@ti.com>

>> ---

>>   .../devicetree/bindings/sound/tas2562.txt     | 37 ---------

>>   .../devicetree/bindings/sound/tas2562.yaml    | 77 +++++++++++++++++++

>>   2 files changed, 77 insertions(+), 37 deletions(-)

>>   delete mode 100644 Documentation/devicetree/bindings/sound/tas2562.txt

>>   create mode 100644 Documentation/devicetree/bindings/sound/tas2562.yaml

>>

>> diff --git a/Documentation/devicetree/bindings/sound/tas2562.txt b/Documentation/devicetree/bindings/sound/tas2562.txt

>> deleted file mode 100644

>> index dc6d7362ded7..000000000000

>> --- a/Documentation/devicetree/bindings/sound/tas2562.txt

>> +++ /dev/null

>> @@ -1,37 +0,0 @@

>> -Texas Instruments TAS2562 Smart PA

>> -

>> -The TAS2562 is a mono, digital input Class-D audio amplifier optimized for

>> -efficiently driving high peak power into small loudspeakers.

>> -Integrated speaker voltage and current sense provides for

>> -real time monitoring of loudspeaker behavior.

>> -

>> -Required properties:

>> - - #address-cells  - Should be <1>.

>> - - #size-cells     - Should be <0>.

>> - - compatible:	   - Should contain "ti,tas2562", "ti,tas2563".

>> - - reg:		   - The i2c address. Should be 0x4c, 0x4d, 0x4e or 0x4f.

>> - - ti,imon-slot-no:- TDM TX current sense time slot.

>> - - ti,vmon-slot-no:- TDM TX voltage sense time slot. This slot must always be

>> -		     greater then ti,imon-slot-no.

>> -

>> -Optional properties:

>> -- interrupt-parent: phandle to the interrupt controller which provides

>> -                    the interrupt.

>> -- interrupts: (GPIO) interrupt to which the chip is connected.

>> -- shut-down-gpio: GPIO used to control the state of the device.

>> -

>> -Examples:

>> -tas2562@4c {

>> -        #address-cells = <1>;

>> -        #size-cells = <0>;

>> -        compatible = "ti,tas2562";

>> -        reg = <0x4c>;

>> -

>> -        interrupt-parent = <&gpio1>;

>> -        interrupts = <14>;

>> -

>> -	shut-down-gpio = <&gpio1 15 0>;

>> -        ti,imon-slot-no = <0>;

>> -        ti,vmon-slot-no = <1>;

>> -};

>> -

>> diff --git a/Documentation/devicetree/bindings/sound/tas2562.yaml b/Documentation/devicetree/bindings/sound/tas2562.yaml

>> new file mode 100644

>> index 000000000000..1fb467e14d4c

>> --- /dev/null

>> +++ b/Documentation/devicetree/bindings/sound/tas2562.yaml

>> @@ -0,0 +1,77 @@

>> +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)

> Same licensing comment here as tas2770


OK I will fix it like I did with the other TAS2770 patches


>> +# Copyright (C) 2019 Texas Instruments Incorporated

>> +%YAML 1.2

>> +---

>> +$id: "http://devicetree.org/schemas/sound/tas2562.yaml#"

>> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"

>> +

>> +title: Texas Instruments TAS2562 Smart PA

>> +

>> +maintainers:

>> +  - Dan Murphy <dmurphy@ti.com>

>> +

>> +description: |

>> +  The TAS2562 is a mono, digital input Class-D audio amplifier optimized for

>> +  efficiently driving high peak power into small loudspeakers.

>> +  Integrated speaker voltage and current sense provides for

>> +  real time monitoring of loudspeaker behavior.

>> +

>> +properties:

>> +  compatible:

>> +    enum:

>> +      - ti,tas2562

>> +      - ti,tas2563

>> +

>> +  reg:

>> +    maxItems: 1

>> +    description: |

>> +       I2C address of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f

>> +

>> +  shut-down-gpio:

>> +    description: GPIO used to control the state of the device.

>> +    deprecated: true

> Why do we need this as the driver never worked?


Not sure what you are asking.

Driver has been fixed for this specific binding in sound for-next.

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git/commit/sound/soc/codecs/tas2562.c?h=for-next&id=bc07b54459cbb3a572a78b5c200ff79ef11b8158

>

>> +

>> +  shutdown-gpio:

>> +    description: GPIO used to control the state of the device.

> -gpios is the preferred form: shutdown-gpios


So the plural form of gpio is preferred even if the gpio is singular?  I 
would think gpio would be plural if this was an array of gpios.

I am waiting for the yaml to be accepted before adding this shutdown 
property to the driver.

Dan
Rob Herring (Arm) July 23, 2020, 8:16 p.m. UTC | #3
On Mon, Jul 20, 2020 at 12:22 PM Dan Murphy <dmurphy@ti.com> wrote:
>

> Rob

>

> On 7/15/20 3:15 PM, Rob Herring wrote:

> > On Fri, Jun 26, 2020 at 10:41:43AM -0500, Dan Murphy wrote:

> >> Convert the TAS2562 text file to yaml format.

> >>

> >> Signed-off-by: Dan Murphy <dmurphy@ti.com>

> >> ---

> >>   .../devicetree/bindings/sound/tas2562.txt     | 37 ---------

> >>   .../devicetree/bindings/sound/tas2562.yaml    | 77 +++++++++++++++++++

> >>   2 files changed, 77 insertions(+), 37 deletions(-)

> >>   delete mode 100644 Documentation/devicetree/bindings/sound/tas2562.txt

> >>   create mode 100644 Documentation/devicetree/bindings/sound/tas2562.yaml

> >>

> >> diff --git a/Documentation/devicetree/bindings/sound/tas2562.txt b/Documentation/devicetree/bindings/sound/tas2562.txt

> >> deleted file mode 100644

> >> index dc6d7362ded7..000000000000

> >> --- a/Documentation/devicetree/bindings/sound/tas2562.txt

> >> +++ /dev/null

> >> @@ -1,37 +0,0 @@

> >> -Texas Instruments TAS2562 Smart PA

> >> -

> >> -The TAS2562 is a mono, digital input Class-D audio amplifier optimized for

> >> -efficiently driving high peak power into small loudspeakers.

> >> -Integrated speaker voltage and current sense provides for

> >> -real time monitoring of loudspeaker behavior.

> >> -

> >> -Required properties:

> >> - - #address-cells  - Should be <1>.

> >> - - #size-cells     - Should be <0>.

> >> - - compatible:         - Should contain "ti,tas2562", "ti,tas2563".

> >> - - reg:                - The i2c address. Should be 0x4c, 0x4d, 0x4e or 0x4f.

> >> - - ti,imon-slot-no:- TDM TX current sense time slot.

> >> - - ti,vmon-slot-no:- TDM TX voltage sense time slot. This slot must always be

> >> -                 greater then ti,imon-slot-no.

> >> -

> >> -Optional properties:

> >> -- interrupt-parent: phandle to the interrupt controller which provides

> >> -                    the interrupt.

> >> -- interrupts: (GPIO) interrupt to which the chip is connected.

> >> -- shut-down-gpio: GPIO used to control the state of the device.

> >> -

> >> -Examples:

> >> -tas2562@4c {

> >> -        #address-cells = <1>;

> >> -        #size-cells = <0>;

> >> -        compatible = "ti,tas2562";

> >> -        reg = <0x4c>;

> >> -

> >> -        interrupt-parent = <&gpio1>;

> >> -        interrupts = <14>;

> >> -

> >> -    shut-down-gpio = <&gpio1 15 0>;

> >> -        ti,imon-slot-no = <0>;

> >> -        ti,vmon-slot-no = <1>;

> >> -};

> >> -

> >> diff --git a/Documentation/devicetree/bindings/sound/tas2562.yaml b/Documentation/devicetree/bindings/sound/tas2562.yaml

> >> new file mode 100644

> >> index 000000000000..1fb467e14d4c

> >> --- /dev/null

> >> +++ b/Documentation/devicetree/bindings/sound/tas2562.yaml

> >> @@ -0,0 +1,77 @@

> >> +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)

> > Same licensing comment here as tas2770

>

> OK I will fix it like I did with the other TAS2770 patches

>

>

> >> +# Copyright (C) 2019 Texas Instruments Incorporated

> >> +%YAML 1.2

> >> +---

> >> +$id: "http://devicetree.org/schemas/sound/tas2562.yaml#"

> >> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"

> >> +

> >> +title: Texas Instruments TAS2562 Smart PA

> >> +

> >> +maintainers:

> >> +  - Dan Murphy <dmurphy@ti.com>

> >> +

> >> +description: |

> >> +  The TAS2562 is a mono, digital input Class-D audio amplifier optimized for

> >> +  efficiently driving high peak power into small loudspeakers.

> >> +  Integrated speaker voltage and current sense provides for

> >> +  real time monitoring of loudspeaker behavior.

> >> +

> >> +properties:

> >> +  compatible:

> >> +    enum:

> >> +      - ti,tas2562

> >> +      - ti,tas2563

> >> +

> >> +  reg:

> >> +    maxItems: 1

> >> +    description: |

> >> +       I2C address of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f

> >> +

> >> +  shut-down-gpio:

> >> +    description: GPIO used to control the state of the device.

> >> +    deprecated: true

> > Why do we need this as the driver never worked?

>

> Not sure what you are asking.

>

> Driver has been fixed for this specific binding in sound for-next.

>

> https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git/commit/sound/soc/codecs/tas2562.c?h=for-next&id=bc07b54459cbb3a572a78b5c200ff79ef11b8158


Why fix the driver and then have to maintain compatibility? Just
update everything to use 'shutdown-gpios' and move on.

Rob
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/tas2562.txt b/Documentation/devicetree/bindings/sound/tas2562.txt
deleted file mode 100644
index dc6d7362ded7..000000000000
--- a/Documentation/devicetree/bindings/sound/tas2562.txt
+++ /dev/null
@@ -1,37 +0,0 @@ 
-Texas Instruments TAS2562 Smart PA
-
-The TAS2562 is a mono, digital input Class-D audio amplifier optimized for
-efficiently driving high peak power into small loudspeakers.
-Integrated speaker voltage and current sense provides for
-real time monitoring of loudspeaker behavior.
-
-Required properties:
- - #address-cells  - Should be <1>.
- - #size-cells     - Should be <0>.
- - compatible:	   - Should contain "ti,tas2562", "ti,tas2563".
- - reg:		   - The i2c address. Should be 0x4c, 0x4d, 0x4e or 0x4f.
- - ti,imon-slot-no:- TDM TX current sense time slot.
- - ti,vmon-slot-no:- TDM TX voltage sense time slot. This slot must always be
-		     greater then ti,imon-slot-no.
-
-Optional properties:
-- interrupt-parent: phandle to the interrupt controller which provides
-                    the interrupt.
-- interrupts: (GPIO) interrupt to which the chip is connected.
-- shut-down-gpio: GPIO used to control the state of the device.
-
-Examples:
-tas2562@4c {
-        #address-cells = <1>;
-        #size-cells = <0>;
-        compatible = "ti,tas2562";
-        reg = <0x4c>;
-
-        interrupt-parent = <&gpio1>;
-        interrupts = <14>;
-
-	shut-down-gpio = <&gpio1 15 0>;
-        ti,imon-slot-no = <0>;
-        ti,vmon-slot-no = <1>;
-};
-
diff --git a/Documentation/devicetree/bindings/sound/tas2562.yaml b/Documentation/devicetree/bindings/sound/tas2562.yaml
new file mode 100644
index 000000000000..1fb467e14d4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tas2562.yaml
@@ -0,0 +1,77 @@ 
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+# Copyright (C) 2019 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/sound/tas2562.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Texas Instruments TAS2562 Smart PA
+
+maintainers:
+  - Dan Murphy <dmurphy@ti.com>
+
+description: |
+  The TAS2562 is a mono, digital input Class-D audio amplifier optimized for
+  efficiently driving high peak power into small loudspeakers.
+  Integrated speaker voltage and current sense provides for
+  real time monitoring of loudspeaker behavior.
+
+properties:
+  compatible:
+    enum:
+      - ti,tas2562
+      - ti,tas2563
+
+  reg:
+    maxItems: 1
+    description: |
+       I2C address of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f
+
+  shut-down-gpio:
+    description: GPIO used to control the state of the device.
+    deprecated: true
+
+  shutdown-gpio:
+    description: GPIO used to control the state of the device.
+
+  interrupts:
+    maxItems: 1
+
+  ti,imon-slot-no:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: TDM TX current sense time slot.
+
+  ti,vmon-slot-no:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      TDM TX voltage sense time slot.  This slot must always be greater then
+      ti,imon-slot-no.
+
+  '#sound-dai-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/gpio/gpio.h>
+   i2c0 {
+     #address-cells = <1>;
+     #size-cells = <0>;
+     codec: codec@4c {
+       compatible = "ti,tas2562";
+       reg = <0x4c>;
+       #sound-dai-cells = <1>;
+       interrupt-parent = <&gpio1>;
+       interrupts = <14>;
+       shutdown-gpio = <&gpio1 15 0>;
+       ti,imon-slot-no = <0>;
+       ti,vmon-slot-no = <2>;
+     };
+   };
+
+...