| Message ID | 20200402114125.2501-4-jagan@amarulasolutions.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | rockchip: rk3399: Fix HDMI out | expand |
On 2020/4/2 ??7:41, Jagan Teki wrote: > Enable pre console buffer for rk3399 platform. > > This would help to capture the console messages prior to > the console being initialised. Enabling this would help > to capture all the console messages on video output source > like HDMI. So we can find the full console messages of > U-Boot proper on HDMI display when enabled it for RK3399 > platform boards. > > Buffer address used for pre console is 0x0f200000 which is > ram base plus 240MiB. right now the Allwinner SoC is using > similar computation. > > Signed-off-by: Jagan Teki <jagan at amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang at rock-chips.com> Thanks, - Kever > --- > arch/arm/mach-rockchip/Kconfig | 1 + > common/Kconfig | 1 + > 2 files changed, 2 insertions(+) > > diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig > index ed7514ab75..0cb1f23d0f 100644 > --- a/arch/arm/mach-rockchip/Kconfig > +++ b/arch/arm/mach-rockchip/Kconfig > @@ -229,6 +229,7 @@ config ROCKCHIP_RK3399 > select DM_PMIC > select DM_REGULATOR_FIXED > select BOARD_LATE_INIT > + imply PRE_CONSOLE_BUFFER > imply ROCKCHIP_COMMON_BOARD > imply ROCKCHIP_SDRAM_COMMON > imply SPL_ROCKCHIP_COMMON_BOARD > diff --git a/common/Kconfig b/common/Kconfig > index 46e4193fc8..bd35de3056 100644 > --- a/common/Kconfig > +++ b/common/Kconfig > @@ -568,6 +568,7 @@ config PRE_CON_BUF_ADDR > default 0x2f000000 if ARCH_SUNXI && MACH_SUN9I > default 0x4f000000 if ARCH_SUNXI && !MACH_SUN9I > default 0x0f000000 if ROCKCHIP_RK3288 > + default 0x0f200000 if ROCKCHIP_RK3399 > help > This sets the start address of the pre-console buffer. This must > be in available memory and is accessed before relocation and
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index ed7514ab75..0cb1f23d0f 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -229,6 +229,7 @@ config ROCKCHIP_RK3399 select DM_PMIC select DM_REGULATOR_FIXED select BOARD_LATE_INIT + imply PRE_CONSOLE_BUFFER imply ROCKCHIP_COMMON_BOARD imply ROCKCHIP_SDRAM_COMMON imply SPL_ROCKCHIP_COMMON_BOARD diff --git a/common/Kconfig b/common/Kconfig index 46e4193fc8..bd35de3056 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -568,6 +568,7 @@ config PRE_CON_BUF_ADDR default 0x2f000000 if ARCH_SUNXI && MACH_SUN9I default 0x4f000000 if ARCH_SUNXI && !MACH_SUN9I default 0x0f000000 if ROCKCHIP_RK3288 + default 0x0f200000 if ROCKCHIP_RK3399 help This sets the start address of the pre-console buffer. This must be in available memory and is accessed before relocation and
Enable pre console buffer for rk3399 platform. This would help to capture the console messages prior to the console being initialised. Enabling this would help to capture all the console messages on video output source like HDMI. So we can find the full console messages of U-Boot proper on HDMI display when enabled it for RK3399 platform boards. Buffer address used for pre console is 0x0f200000 which is ram base plus 240MiB. right now the Allwinner SoC is using similar computation. Signed-off-by: Jagan Teki <jagan at amarulasolutions.com> --- arch/arm/mach-rockchip/Kconfig | 1 + common/Kconfig | 1 + 2 files changed, 2 insertions(+)