diff mbox series

[3/3] ARM: imx: vining2000: Enable SPL SDP by default

Message ID 20200115102732.167211-3-marex@denx.de
State Accepted
Commit 9d1230332208b260c23adba2298e5dab9b23a358
Headers show
Series [1/3] ARM: imx: vining2000: Clean up uSDHC4 setup | expand

Commit Message

Marek Vasut Jan. 15, 2020, 10:27 a.m. UTC 
Enable SPL SDP fallback boot option in default build.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Fabio Estevam <fabio.estevam at nxp.com>
Cc: Silvio Fricke <silvio.fricke at softing.com>
Cc: Stefano Babic <sbabic at denx.de>
---
 configs/vining_2000_defconfig | 9 +++++++++
 include/configs/vining_2000.h | 2 --
 2 files changed, 9 insertions(+), 2 deletions(-)

Comments

Stefano Babic Jan. 20, 2020, 8:18 p.m. UTC | #1 
> Enable SPL SDP fallback boot option in default build.
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Fabio Estevam <fabio.estevam at nxp.com>
> Cc: Silvio Fricke <silvio.fricke at softing.com>
> Cc: Stefano Babic <sbabic at denx.de>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic
diff mbox series

Patch

diff --git a/configs/vining_2000_defconfig b/configs/vining_2000_defconfig
index c1542fe5d3..34b49ce972 100644
--- a/configs/vining_2000_defconfig
+++ b/configs/vining_2000_defconfig
@@ -26,6 +26,9 @@  CONFIG_BOUNCE_BUFFER=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_FS_EXT4=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_GADGET=y
+CONFIG_SPL_USB_SDP_SUPPORT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
@@ -74,5 +77,11 @@  CONFIG_MXC_UART=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Softing"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
+CONFIG_CI_UDC=y
+CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
diff --git a/include/configs/vining_2000.h b/include/configs/vining_2000.h
index 0c0baf2738..61d9c62068 100644
--- a/include/configs/vining_2000.h
+++ b/include/configs/vining_2000.h
@@ -66,12 +66,10 @@ 
 
 #define CONFIG_PHY_ATHEROS
 
-#ifdef CONFIG_CMD_USB
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS   0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-#endif
 
 #ifdef CONFIG_CMD_PCI
 #define CONFIG_PCI_SCAN_SHOW