| Message ID | 20200605082925.4559-1-sr@denx.de |
|---|---|
| State | Accepted |
| Commit | c37281310593c01981516bb706242f80295a1308 |
| Headers | show |
| Series | mips: reloc: Change R_MIPS_NONE to catch pre-reloc BSS usage | expand |
Am 05.06.20 um 10:29 schrieb Stefan Roese: > This patch changes the R_MIPS_NONE define from 0 to a magic value. This > makes it possible to better detect any forbidden pre-relocation usage > of BSS variables, as they are often zero'ed and then relocation is > stopped too early. > > Additionally the error message is improved to also print the faulting > address. This helps finding the root-cause for this breakage by > comparing this address with the values in System.map. > > This patch helps a lot when working on pre-relocation code, like the > Octeon DDR init code, where such variables have hit me multiple times > now. > > Signed-off-by: Stefan Roese <sr at denx.de> > Cc: Daniel Schwierzeck <daniel.schwierzeck at gmail.com> > Cc: Aaron Williams <awilliams at marvell.com> > Cc: Chandrakala Chavva <cchavva at marvell.com> > --- > arch/mips/include/asm/relocs.h | 2 +- > arch/mips/lib/reloc.c | 7 ++++--- > 2 files changed, 5 insertions(+), 4 deletions(-) > applied to u-boot-mips/next, thanks. BTW: in case the relocation table is cutted off, you can increase the size with CONFIG_MIPS_RELOCATION_TABLE_SIZE.
On 05.06.20 17:51, Daniel Schwierzeck wrote: > > > Am 05.06.20 um 10:29 schrieb Stefan Roese: >> This patch changes the R_MIPS_NONE define from 0 to a magic value. This >> makes it possible to better detect any forbidden pre-relocation usage >> of BSS variables, as they are often zero'ed and then relocation is >> stopped too early. >> >> Additionally the error message is improved to also print the faulting >> address. This helps finding the root-cause for this breakage by >> comparing this address with the values in System.map. >> >> This patch helps a lot when working on pre-relocation code, like the >> Octeon DDR init code, where such variables have hit me multiple times >> now. >> >> Signed-off-by: Stefan Roese <sr at denx.de> >> Cc: Daniel Schwierzeck <daniel.schwierzeck at gmail.com> >> Cc: Aaron Williams <awilliams at marvell.com> >> Cc: Chandrakala Chavva <cchavva at marvell.com> >> --- >> arch/mips/include/asm/relocs.h | 2 +- >> arch/mips/lib/reloc.c | 7 ++++--- >> 2 files changed, 5 insertions(+), 4 deletions(-) >> > > applied to u-boot-mips/next, thanks. > > BTW: in case the relocation table is cutted off, you can increase the > size with CONFIG_MIPS_RELOCATION_TABLE_SIZE. Yes, I know. But this is not the case here. Its the runtime overwrite that I'm addressing. Thanks, Stefan
diff --git a/arch/mips/include/asm/relocs.h b/arch/mips/include/asm/relocs.h index 0987c4bb13..b9b0261f62 100644 --- a/arch/mips/include/asm/relocs.h +++ b/arch/mips/include/asm/relocs.h @@ -8,7 +8,7 @@ #ifndef __ASM_MIPS_RELOCS_H__ #define __ASM_MIPS_RELOCS_H__ -#define R_MIPS_NONE 0 +#define R_MIPS_NONE 0xbeef7531 #define R_MIPS_32 2 #define R_MIPS_26 4 #define R_MIPS_HI16 5 diff --git a/arch/mips/lib/reloc.c b/arch/mips/lib/reloc.c index ffc8c7a1b7..67c8af2f35 100644 --- a/arch/mips/lib/reloc.c +++ b/arch/mips/lib/reloc.c @@ -67,7 +67,7 @@ static unsigned long read_uint(uint8_t **buf) * intentionally simple, and does the bare minimum needed to fixup the * relocated U-Boot - in particular, it does not check for overflows. */ -static void apply_reloc(unsigned int type, void *addr, long off) +static void apply_reloc(unsigned int type, void *addr, long off, uint8_t *buf) { uint32_t u32; @@ -92,7 +92,8 @@ static void apply_reloc(unsigned int type, void *addr, long off) break; default: - panic("Unhandled reloc type %u\n", type); + panic("Unhandled reloc type %u (@ %p), bss used before relocation?\n", + type, buf); } } @@ -137,7 +138,7 @@ void relocate_code(ulong start_addr_sp, gd_t *new_gd, ulong relocaddr) break; addr += read_uint(&buf) << 2; - apply_reloc(type, (void *)addr, off); + apply_reloc(type, (void *)addr, off, buf); } /* Ensure the icache is coherent */
This patch changes the R_MIPS_NONE define from 0 to a magic value. This makes it possible to better detect any forbidden pre-relocation usage of BSS variables, as they are often zero'ed and then relocation is stopped too early. Additionally the error message is improved to also print the faulting address. This helps finding the root-cause for this breakage by comparing this address with the values in System.map. This patch helps a lot when working on pre-relocation code, like the Octeon DDR init code, where such variables have hit me multiple times now. Signed-off-by: Stefan Roese <sr at denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck at gmail.com> Cc: Aaron Williams <awilliams at marvell.com> Cc: Chandrakala Chavva <cchavva at marvell.com> --- arch/mips/include/asm/relocs.h | 2 +- arch/mips/lib/reloc.c | 7 ++++--- 2 files changed, 5 insertions(+), 4 deletions(-)