| Message ID | 20200613205459.v3.12.I533d36d6b9131850d53b716ea555a4e494fa14df@changeid |
|---|---|
| State | Superseded |
| Headers | show |
| Series | dm: Add programmatic generation of ACPI tables (part B) | expand |
Hi Simon, -----"Simon Glass" <sjg at chromium.org> schrieb: ----- > Betreff: [PATCH v3 12/35] acpi: Support generation of SPI descriptor > > Add a function to write a SPI descriptor to the generated ACPI code. > > Signed-off-by: Simon Glass <sjg at chromium.org> > --- > > Changes in v3: > - Make acpi_device_write_spi() static > - Add an extra comment about scope to acpi_device_set_spi() > - Use BIT() in a few places > - Resist the temptation to go to >80 characters > > Changes in v2: > - Fix memset of SPI descriptor > > drivers/spi/sandbox_spi.c | 11 ++++ > include/acpi/acpi_device.h | 36 +++++++++++ > include/spi.h | 4 +- > lib/acpi/acpi_device.c | 124 +++++++++++++++++++++++++++++++++++++ > test/dm/acpigen.c | 36 +++++++++++ > 5 files changed, 209 insertions(+), 2 deletions(-) Reviewed-by: Wolfgang Wallner <wolfgang.wallner at br-automation.com>
Hi Simon, On Sun, Jun 14, 2020 at 10:55 AM Simon Glass <sjg at chromium.org> wrote: > > Add a function to write a SPI descriptor to the generated ACPI code. > > Signed-off-by: Simon Glass <sjg at chromium.org> > --- > > Changes in v3: > - Make acpi_device_write_spi() static > - Add an extra comment about scope to acpi_device_set_spi() > - Use BIT() in a few places > - Resist the temptation to go to >80 characters > > Changes in v2: > - Fix memset of SPI descriptor > > drivers/spi/sandbox_spi.c | 11 ++++ > include/acpi/acpi_device.h | 36 +++++++++++ > include/spi.h | 4 +- > lib/acpi/acpi_device.c | 124 +++++++++++++++++++++++++++++++++++++ > test/dm/acpigen.c | 36 +++++++++++ > 5 files changed, 209 insertions(+), 2 deletions(-) > > diff --git a/drivers/spi/sandbox_spi.c b/drivers/spi/sandbox_spi.c > index b0a46c8868..4264acc953 100644 > --- a/drivers/spi/sandbox_spi.c > +++ b/drivers/spi/sandbox_spi.c > @@ -21,6 +21,7 @@ > #include <linux/errno.h> > #include <asm/spi.h> > #include <asm/state.h> > +#include <dm/acpi.h> > #include <dm/device-internal.h> > > #ifndef CONFIG_SPI_IDLE_VAL > @@ -133,6 +134,15 @@ static int sandbox_spi_get_mmap(struct udevice *dev, ulong *map_basep, > return 0; > } > > +static int sandbox_spi_get_name(const struct udevice *dev, char *out_name) > +{ > + return acpi_copy_name(out_name, "SSPI"); > +} > + > +struct acpi_ops sandbox_spi_acpi_ops = { > + .get_name = sandbox_spi_get_name, > +}; > + > static const struct dm_spi_ops sandbox_spi_ops = { > .xfer = sandbox_spi_xfer, > .set_speed = sandbox_spi_set_speed, > @@ -151,4 +161,5 @@ U_BOOT_DRIVER(spi_sandbox) = { > .id = UCLASS_SPI, > .of_match = sandbox_spi_ids, > .ops = &sandbox_spi_ops, > + ACPI_OPS_PTR(&sandbox_spi_acpi_ops) > }; > diff --git a/include/acpi/acpi_device.h b/include/acpi/acpi_device.h > index f738b03d58..c0c96183e4 100644 > --- a/include/acpi/acpi_device.h > +++ b/include/acpi/acpi_device.h > @@ -10,6 +10,7 @@ > #define __ACPI_DEVICE_H > > #include <i2c.h> > +#include <spi.h> > #include <linux/bitops.h> > > struct acpi_ctx; > @@ -207,6 +208,29 @@ struct acpi_i2c { > const char *resource; > }; > > +/** > + * struct acpi_spi - representation of an ACPI SPI device > + * > + * @device_select: Chip select used by this device (typically 0) > + * @device_select_polarity: Polarity for the device > + * @wire_mode: Number of wires used for SPI > + * @speed: Bus speed in Hz > + * @data_bit_length: Word length for SPI (typically 8) > + * @clock_phase: Clock phase to capture data > + * @clock_polarity: Bus polarity > + * @resource: Resource name for the SPI controller > + */ > +struct acpi_spi { > + u16 device_select; > + enum spi_polarity device_select_polarity; > + enum spi_wire_mode wire_mode; > + unsigned int speed; > + u8 data_bit_length; > + enum spi_clock_phase clock_phase; > + enum spi_polarity clock_polarity; > + const char *resource; > +}; > + > /** > * acpi_device_path() - Get the full path to an ACPI device > * > @@ -306,4 +330,16 @@ int acpi_device_write_interrupt_or_gpio(struct acpi_ctx *ctx, > */ > int acpi_device_write_i2c_dev(struct acpi_ctx *ctx, const struct udevice *dev); > > +/** > + * acpi_device_write_spi_dev() - Write a SPI device to ACPI > + * > + * This writes a serial bus descriptor for the SPI device so that ACPI can use > + * it > + * > + * @ctx: ACPI context pointer > + * @dev: SPI device to write > + * @return 0 if OK, -ve on error > + */ > +int acpi_device_write_spi_dev(struct acpi_ctx *ctx, const struct udevice *dev); > + > #endif > diff --git a/include/spi.h b/include/spi.h > index 5cc6d6e008..f34533f54e 100644 > --- a/include/spi.h > +++ b/include/spi.h > @@ -13,8 +13,8 @@ > #include <linux/bitops.h> > > /* SPI mode flags */ > -#define SPI_CPHA BIT(0) /* clock phase */ > -#define SPI_CPOL BIT(1) /* clock polarity */ > +#define SPI_CPHA BIT(0) /* clock phase (1 = SPI_CLOCK_PHASE_SECOND) */ > +#define SPI_CPOL BIT(1) /* clock polarity (1 = SPI_POLARITY_HIGH) */ > #define SPI_MODE_0 (0|0) /* (original MicroWire) */ > #define SPI_MODE_1 (0|SPI_CPHA) > #define SPI_MODE_2 (SPI_CPOL|0) > diff --git a/lib/acpi/acpi_device.c b/lib/acpi/acpi_device.c > index 40d1a82d27..38101c8b96 100644 > --- a/lib/acpi/acpi_device.c > +++ b/lib/acpi/acpi_device.c > @@ -488,3 +488,127 @@ int acpi_device_write_i2c_dev(struct acpi_ctx *ctx, const struct udevice *dev) > > return 0; > } > + > +#ifdef CONFIG_SPI Why #ifdef? Other APIs don't have this > +/* ACPI 6.1 section 6.4.3.8.2.2 - SpiSerialBus() */ > +static void acpi_device_write_spi(struct acpi_ctx *ctx, const struct acpi_spi *spi) > +{ > + void *desc_length, *type_length; > + u16 flags = 0; > + > + /* Byte 0: Descriptor Type */ > + acpigen_emit_byte(ctx, ACPI_DESCRIPTOR_SERIAL_BUS); > + > + /* Byte 1+2: Length (filled in later) */ > + desc_length = acpi_device_write_zero_len(ctx); > + > + /* Byte 3: Revision ID */ > + acpigen_emit_byte(ctx, ACPI_SPI_SERIAL_BUS_REVISION_ID); > + > + /* Byte 4: Resource Source Index is Reserved */ > + acpigen_emit_byte(ctx, 0); > + > + /* Byte 5: Serial Bus Type is SPI */ > + acpigen_emit_byte(ctx, ACPI_SERIAL_BUS_TYPE_SPI); > + > + /* > + * Byte 6: Flags > + * [7:2]: 0 => Reserved > + * [1]: 1 => ResourceConsumer > + * [0]: 0 => ControllerInitiated > + */ > + acpigen_emit_byte(ctx, BIT(1)); > + > + /* > + * Byte 7-8: Type Specific Flags > + * [15:2]: 0 => Reserveda > + * [1]: 0 => ActiveLow, 1 => ActiveHigh > + * [0]: 0 => FourWire, 1 => ThreeWire > + */ > + if (spi->wire_mode == SPI_3_WIRE_MODE) > + flags |= BIT(0); > + if (spi->device_select_polarity == SPI_POLARITY_HIGH) > + flags |= BIT(1); > + acpigen_emit_word(ctx, flags); > + > + /* Byte 9: Type Specific Revision ID */ > + acpigen_emit_byte(ctx, ACPI_SPI_TYPE_SPECIFIC_REVISION_ID); > + > + /* Byte 10-11: SPI Type Data Length */ > + type_length = acpi_device_write_zero_len(ctx); > + > + /* Byte 12-15: Connection Speed */ > + acpigen_emit_dword(ctx, spi->speed); > + > + /* Byte 16: Data Bit Length */ > + acpigen_emit_byte(ctx, spi->data_bit_length); > + > + /* Byte 17: Clock Phase */ > + acpigen_emit_byte(ctx, spi->clock_phase); > + > + /* Byte 18: Clock Polarity */ > + acpigen_emit_byte(ctx, spi->clock_polarity); > + > + /* Byte 19-20: Device Selection */ > + acpigen_emit_word(ctx, spi->device_select); > + > + /* Fill in Type Data Length */ > + acpi_device_fill_len(ctx, type_length); > + > + /* Byte 21+: ResourceSource String */ > + acpigen_emit_string(ctx, spi->resource); > + > + /* Fill in SPI Descriptor Length */ > + acpi_device_fill_len(ctx, desc_length); > +} > + > +/** > + * acpi_device_set_spi() - Set up an ACPI SPI struct from a device > + * > + * The value of @scope is not copied, but only referenced. This implies the > + * caller has to ensure it stays valid for the lifetime of @spi. > + * > + * @dev: SPI device to convert > + * @spi: Place to put the new structure > + * @scope: Scope of the SPI device (this is the controller path) > + * @return 0 (always) > + */ > +static int acpi_device_set_spi(const struct udevice *dev, struct acpi_spi *spi, > + const char *scope) > +{ > + struct dm_spi_slave_platdata *plat; > + struct spi_slave *slave = dev_get_parent_priv(dev); > + > + plat = dev_get_parent_platdata(slave->dev); > + memset(spi, '\0', sizeof(*spi)); > + spi->device_select = plat->cs; > + spi->device_select_polarity = SPI_POLARITY_LOW; > + spi->wire_mode = SPI_4_WIRE_MODE; > + spi->speed = plat->max_hz; > + spi->data_bit_length = slave->wordlen; > + spi->clock_phase = plat->mode & SPI_CPHA ? > + SPI_CLOCK_PHASE_SECOND : SPI_CLOCK_PHASE_FIRST; > + spi->clock_polarity = plat->mode & SPI_CPOL ? > + SPI_POLARITY_HIGH : SPI_POLARITY_LOW; > + spi->resource = scope; > + > + return 0; > +} > + > +int acpi_device_write_spi_dev(struct acpi_ctx *ctx, const struct udevice *dev) > +{ > + char scope[ACPI_PATH_MAX]; > + struct acpi_spi spi; > + int ret; > + > + ret = acpi_device_scope(dev, scope, sizeof(scope)); > + if (ret) > + return log_msg_ret("scope", ret); > + ret = acpi_device_set_spi(dev, &spi, scope); > + if (ret) > + return log_msg_ret("set", ret); > + acpi_device_write_spi(ctx, &spi); > + > + return 0; > +} > +#endif /* CONFIG_SPI */ > diff --git a/test/dm/acpigen.c b/test/dm/acpigen.c > index 53842be55a..571510722d 100644 > --- a/test/dm/acpigen.c > +++ b/test/dm/acpigen.c > @@ -302,3 +302,39 @@ static int dm_test_acpi_i2c(struct unit_test_state *uts) > return 0; > } > DM_TEST(dm_test_acpi_i2c, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); > + > +/* Test emitting a SPI descriptor */ > +static int dm_test_acpi_spi(struct unit_test_state *uts) > +{ > + struct acpi_ctx *ctx; > + struct udevice *dev; > + u8 *ptr; > + > + ut_assertok(alloc_context(&ctx)); > + > + ptr = acpigen_get_current(ctx); > + > + ut_assertok(uclass_first_device_err(UCLASS_SPI_FLASH, &dev)); > + ut_assertok(acpi_device_write_spi_dev(ctx, dev)); > + ut_asserteq(31, acpigen_get_current(ctx) - ptr); > + ut_asserteq(ACPI_DESCRIPTOR_SERIAL_BUS, ptr[0]); > + ut_asserteq(28, get_unaligned((u16 *)(ptr + 1))); > + ut_asserteq(ACPI_SPI_SERIAL_BUS_REVISION_ID, ptr[3]); > + ut_asserteq(0, ptr[4]); > + ut_asserteq(ACPI_SERIAL_BUS_TYPE_SPI, ptr[5]); > + ut_asserteq(2, ptr[6]); > + ut_asserteq(0, get_unaligned((u16 *)(ptr + 7))); > + ut_asserteq(ACPI_SPI_TYPE_SPECIFIC_REVISION_ID, ptr[9]); > + ut_asserteq(9, get_unaligned((u16 *)(ptr + 10))); > + ut_asserteq(40000000, get_unaligned((u32 *)(ptr + 12))); > + ut_asserteq(8, ptr[16]); > + ut_asserteq(0, ptr[17]); > + ut_asserteq(0, ptr[18]); > + ut_asserteq(0, get_unaligned((u16 *)(ptr + 19))); > + ut_asserteq_str("\\_SB.SSPI", (char *)ptr + 21); > + > + free_context(&ctx); > + > + return 0; > +} > +DM_TEST(dm_test_acpi_spi, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); > -- Other than above, Reviewed-by: Bin Meng <bmeng.cn at gmail.com> Regards, Bin
diff --git a/drivers/spi/sandbox_spi.c b/drivers/spi/sandbox_spi.c index b0a46c8868..4264acc953 100644 --- a/drivers/spi/sandbox_spi.c +++ b/drivers/spi/sandbox_spi.c @@ -21,6 +21,7 @@ #include <linux/errno.h> #include <asm/spi.h> #include <asm/state.h> +#include <dm/acpi.h> #include <dm/device-internal.h> #ifndef CONFIG_SPI_IDLE_VAL @@ -133,6 +134,15 @@ static int sandbox_spi_get_mmap(struct udevice *dev, ulong *map_basep, return 0; } +static int sandbox_spi_get_name(const struct udevice *dev, char *out_name) +{ + return acpi_copy_name(out_name, "SSPI"); +} + +struct acpi_ops sandbox_spi_acpi_ops = { + .get_name = sandbox_spi_get_name, +}; + static const struct dm_spi_ops sandbox_spi_ops = { .xfer = sandbox_spi_xfer, .set_speed = sandbox_spi_set_speed, @@ -151,4 +161,5 @@ U_BOOT_DRIVER(spi_sandbox) = { .id = UCLASS_SPI, .of_match = sandbox_spi_ids, .ops = &sandbox_spi_ops, + ACPI_OPS_PTR(&sandbox_spi_acpi_ops) }; diff --git a/include/acpi/acpi_device.h b/include/acpi/acpi_device.h index f738b03d58..c0c96183e4 100644 --- a/include/acpi/acpi_device.h +++ b/include/acpi/acpi_device.h @@ -10,6 +10,7 @@ #define __ACPI_DEVICE_H #include <i2c.h> +#include <spi.h> #include <linux/bitops.h> struct acpi_ctx; @@ -207,6 +208,29 @@ struct acpi_i2c { const char *resource; }; +/** + * struct acpi_spi - representation of an ACPI SPI device + * + * @device_select: Chip select used by this device (typically 0) + * @device_select_polarity: Polarity for the device + * @wire_mode: Number of wires used for SPI + * @speed: Bus speed in Hz + * @data_bit_length: Word length for SPI (typically 8) + * @clock_phase: Clock phase to capture data + * @clock_polarity: Bus polarity + * @resource: Resource name for the SPI controller + */ +struct acpi_spi { + u16 device_select; + enum spi_polarity device_select_polarity; + enum spi_wire_mode wire_mode; + unsigned int speed; + u8 data_bit_length; + enum spi_clock_phase clock_phase; + enum spi_polarity clock_polarity; + const char *resource; +}; + /** * acpi_device_path() - Get the full path to an ACPI device * @@ -306,4 +330,16 @@ int acpi_device_write_interrupt_or_gpio(struct acpi_ctx *ctx, */ int acpi_device_write_i2c_dev(struct acpi_ctx *ctx, const struct udevice *dev); +/** + * acpi_device_write_spi_dev() - Write a SPI device to ACPI + * + * This writes a serial bus descriptor for the SPI device so that ACPI can use + * it + * + * @ctx: ACPI context pointer + * @dev: SPI device to write + * @return 0 if OK, -ve on error + */ +int acpi_device_write_spi_dev(struct acpi_ctx *ctx, const struct udevice *dev); + #endif diff --git a/include/spi.h b/include/spi.h index 5cc6d6e008..f34533f54e 100644 --- a/include/spi.h +++ b/include/spi.h @@ -13,8 +13,8 @@ #include <linux/bitops.h> /* SPI mode flags */ -#define SPI_CPHA BIT(0) /* clock phase */ -#define SPI_CPOL BIT(1) /* clock polarity */ +#define SPI_CPHA BIT(0) /* clock phase (1 = SPI_CLOCK_PHASE_SECOND) */ +#define SPI_CPOL BIT(1) /* clock polarity (1 = SPI_POLARITY_HIGH) */ #define SPI_MODE_0 (0|0) /* (original MicroWire) */ #define SPI_MODE_1 (0|SPI_CPHA) #define SPI_MODE_2 (SPI_CPOL|0) diff --git a/lib/acpi/acpi_device.c b/lib/acpi/acpi_device.c index 40d1a82d27..38101c8b96 100644 --- a/lib/acpi/acpi_device.c +++ b/lib/acpi/acpi_device.c @@ -488,3 +488,127 @@ int acpi_device_write_i2c_dev(struct acpi_ctx *ctx, const struct udevice *dev) return 0; } + +#ifdef CONFIG_SPI +/* ACPI 6.1 section 6.4.3.8.2.2 - SpiSerialBus() */ +static void acpi_device_write_spi(struct acpi_ctx *ctx, const struct acpi_spi *spi) +{ + void *desc_length, *type_length; + u16 flags = 0; + + /* Byte 0: Descriptor Type */ + acpigen_emit_byte(ctx, ACPI_DESCRIPTOR_SERIAL_BUS); + + /* Byte 1+2: Length (filled in later) */ + desc_length = acpi_device_write_zero_len(ctx); + + /* Byte 3: Revision ID */ + acpigen_emit_byte(ctx, ACPI_SPI_SERIAL_BUS_REVISION_ID); + + /* Byte 4: Resource Source Index is Reserved */ + acpigen_emit_byte(ctx, 0); + + /* Byte 5: Serial Bus Type is SPI */ + acpigen_emit_byte(ctx, ACPI_SERIAL_BUS_TYPE_SPI); + + /* + * Byte 6: Flags + * [7:2]: 0 => Reserved + * [1]: 1 => ResourceConsumer + * [0]: 0 => ControllerInitiated + */ + acpigen_emit_byte(ctx, BIT(1)); + + /* + * Byte 7-8: Type Specific Flags + * [15:2]: 0 => Reserveda + * [1]: 0 => ActiveLow, 1 => ActiveHigh + * [0]: 0 => FourWire, 1 => ThreeWire + */ + if (spi->wire_mode == SPI_3_WIRE_MODE) + flags |= BIT(0); + if (spi->device_select_polarity == SPI_POLARITY_HIGH) + flags |= BIT(1); + acpigen_emit_word(ctx, flags); + + /* Byte 9: Type Specific Revision ID */ + acpigen_emit_byte(ctx, ACPI_SPI_TYPE_SPECIFIC_REVISION_ID); + + /* Byte 10-11: SPI Type Data Length */ + type_length = acpi_device_write_zero_len(ctx); + + /* Byte 12-15: Connection Speed */ + acpigen_emit_dword(ctx, spi->speed); + + /* Byte 16: Data Bit Length */ + acpigen_emit_byte(ctx, spi->data_bit_length); + + /* Byte 17: Clock Phase */ + acpigen_emit_byte(ctx, spi->clock_phase); + + /* Byte 18: Clock Polarity */ + acpigen_emit_byte(ctx, spi->clock_polarity); + + /* Byte 19-20: Device Selection */ + acpigen_emit_word(ctx, spi->device_select); + + /* Fill in Type Data Length */ + acpi_device_fill_len(ctx, type_length); + + /* Byte 21+: ResourceSource String */ + acpigen_emit_string(ctx, spi->resource); + + /* Fill in SPI Descriptor Length */ + acpi_device_fill_len(ctx, desc_length); +} + +/** + * acpi_device_set_spi() - Set up an ACPI SPI struct from a device + * + * The value of @scope is not copied, but only referenced. This implies the + * caller has to ensure it stays valid for the lifetime of @spi. + * + * @dev: SPI device to convert + * @spi: Place to put the new structure + * @scope: Scope of the SPI device (this is the controller path) + * @return 0 (always) + */ +static int acpi_device_set_spi(const struct udevice *dev, struct acpi_spi *spi, + const char *scope) +{ + struct dm_spi_slave_platdata *plat; + struct spi_slave *slave = dev_get_parent_priv(dev); + + plat = dev_get_parent_platdata(slave->dev); + memset(spi, '\0', sizeof(*spi)); + spi->device_select = plat->cs; + spi->device_select_polarity = SPI_POLARITY_LOW; + spi->wire_mode = SPI_4_WIRE_MODE; + spi->speed = plat->max_hz; + spi->data_bit_length = slave->wordlen; + spi->clock_phase = plat->mode & SPI_CPHA ? + SPI_CLOCK_PHASE_SECOND : SPI_CLOCK_PHASE_FIRST; + spi->clock_polarity = plat->mode & SPI_CPOL ? + SPI_POLARITY_HIGH : SPI_POLARITY_LOW; + spi->resource = scope; + + return 0; +} + +int acpi_device_write_spi_dev(struct acpi_ctx *ctx, const struct udevice *dev) +{ + char scope[ACPI_PATH_MAX]; + struct acpi_spi spi; + int ret; + + ret = acpi_device_scope(dev, scope, sizeof(scope)); + if (ret) + return log_msg_ret("scope", ret); + ret = acpi_device_set_spi(dev, &spi, scope); + if (ret) + return log_msg_ret("set", ret); + acpi_device_write_spi(ctx, &spi); + + return 0; +} +#endif /* CONFIG_SPI */ diff --git a/test/dm/acpigen.c b/test/dm/acpigen.c index 53842be55a..571510722d 100644 --- a/test/dm/acpigen.c +++ b/test/dm/acpigen.c @@ -302,3 +302,39 @@ static int dm_test_acpi_i2c(struct unit_test_state *uts) return 0; } DM_TEST(dm_test_acpi_i2c, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); + +/* Test emitting a SPI descriptor */ +static int dm_test_acpi_spi(struct unit_test_state *uts) +{ + struct acpi_ctx *ctx; + struct udevice *dev; + u8 *ptr; + + ut_assertok(alloc_context(&ctx)); + + ptr = acpigen_get_current(ctx); + + ut_assertok(uclass_first_device_err(UCLASS_SPI_FLASH, &dev)); + ut_assertok(acpi_device_write_spi_dev(ctx, dev)); + ut_asserteq(31, acpigen_get_current(ctx) - ptr); + ut_asserteq(ACPI_DESCRIPTOR_SERIAL_BUS, ptr[0]); + ut_asserteq(28, get_unaligned((u16 *)(ptr + 1))); + ut_asserteq(ACPI_SPI_SERIAL_BUS_REVISION_ID, ptr[3]); + ut_asserteq(0, ptr[4]); + ut_asserteq(ACPI_SERIAL_BUS_TYPE_SPI, ptr[5]); + ut_asserteq(2, ptr[6]); + ut_asserteq(0, get_unaligned((u16 *)(ptr + 7))); + ut_asserteq(ACPI_SPI_TYPE_SPECIFIC_REVISION_ID, ptr[9]); + ut_asserteq(9, get_unaligned((u16 *)(ptr + 10))); + ut_asserteq(40000000, get_unaligned((u32 *)(ptr + 12))); + ut_asserteq(8, ptr[16]); + ut_asserteq(0, ptr[17]); + ut_asserteq(0, ptr[18]); + ut_asserteq(0, get_unaligned((u16 *)(ptr + 19))); + ut_asserteq_str("\\_SB.SSPI", (char *)ptr + 21); + + free_context(&ctx); + + return 0; +} +DM_TEST(dm_test_acpi_spi, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
Add a function to write a SPI descriptor to the generated ACPI code. Signed-off-by: Simon Glass <sjg at chromium.org> --- Changes in v3: - Make acpi_device_write_spi() static - Add an extra comment about scope to acpi_device_set_spi() - Use BIT() in a few places - Resist the temptation to go to >80 characters Changes in v2: - Fix memset of SPI descriptor drivers/spi/sandbox_spi.c | 11 ++++ include/acpi/acpi_device.h | 36 +++++++++++ include/spi.h | 4 +- lib/acpi/acpi_device.c | 124 +++++++++++++++++++++++++++++++++++++ test/dm/acpigen.c | 36 +++++++++++ 5 files changed, 209 insertions(+), 2 deletions(-)