diff mbox series

[V2] ARM: socfpga: Add initial support for the ABB SECU board

Message ID 20200219185514.49477-1-marex@denx.de
State Accepted
Commit 468ba8d00b5af7828302e297736ae23d4873cfb0
Headers show
Series [V2] ARM: socfpga: Add initial support for the ABB SECU board | expand

Commit Message

Marek Vasut Feb. 19, 2020, 6:55 p.m. UTC
From: Holger Brunck <holger.brunck at ch.abb.com>

Add initial support for the ABB SECU board, which is an ArriaV-based
SoCFPGA system with ethernet and booting from Denali NAND.

Signed-off-by: Holger Brunck <holger.brunck at ch.abb.com>
Cc: Ley Foon Tan <ley.foon.tan at intel.com>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt at gmail.com>
---
V2: Use CONFIG_SYS_I2C_EEPROM_ADDR in printf() in ivm.c
    Enable CONFIG_SYS_NAND_USE_FLASH_BBT
---
 arch/arm/dts/Makefile                   |   1 +
 arch/arm/dts/socfpga_arria5_secu1.dts   | 130 +++++
 arch/arm/mach-socfpga/Kconfig           |  10 +
 board/keymile/Kconfig                   |  11 +-
 board/keymile/common/ivm.c              |  19 +-
 board/keymile/secu1/Makefile            |   7 +
 board/keymile/secu1/qts/iocsr_config.h  | 694 ++++++++++++++++++++++++
 board/keymile/secu1/qts/pinmux_config.h | 218 ++++++++
 board/keymile/secu1/qts/pll_config.h    |  83 +++
 board/keymile/secu1/qts/sdram_config.h  | 327 +++++++++++
 board/keymile/secu1/socfpga.c           |  67 +++
 configs/socfpga_secu1_defconfig         |  84 +++
 include/configs/socfpga_arria5_secu1.h  | 131 +++++
 13 files changed, 1778 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/dts/socfpga_arria5_secu1.dts
 create mode 100644 board/keymile/secu1/Makefile
 create mode 100644 board/keymile/secu1/qts/iocsr_config.h
 create mode 100644 board/keymile/secu1/qts/pinmux_config.h
 create mode 100644 board/keymile/secu1/qts/pll_config.h
 create mode 100644 board/keymile/secu1/qts/sdram_config.h
 create mode 100644 board/keymile/secu1/socfpga.c
 create mode 100644 configs/socfpga_secu1_defconfig
 create mode 100644 include/configs/socfpga_arria5_secu1.h

Comments

Marek Vasut March 3, 2020, 9:13 p.m. UTC | #1
On 2/19/20 7:55 PM, Marek Vasut wrote:
> From: Holger Brunck <holger.brunck at ch.abb.com>
> 
> Add initial support for the ABB SECU board, which is an ArriaV-based
> SoCFPGA system with ethernet and booting from Denali NAND.
> 
> Signed-off-by: Holger Brunck <holger.brunck at ch.abb.com>
> Cc: Ley Foon Tan <ley.foon.tan at intel.com>
> Cc: Simon Goldschmidt <simon.k.r.goldschmidt at gmail.com>
> ---
> V2: Use CONFIG_SYS_I2C_EEPROM_ADDR in printf() in ivm.c
>     Enable CONFIG_SYS_NAND_USE_FLASH_BBT
> ---
>  arch/arm/dts/Makefile                   |   1 +
>  arch/arm/dts/socfpga_arria5_secu1.dts   | 130 +++++
>  arch/arm/mach-socfpga/Kconfig           |  10 +
>  board/keymile/Kconfig                   |  11 +-
>  board/keymile/common/ivm.c              |  19 +-
>  board/keymile/secu1/Makefile            |   7 +
>  board/keymile/secu1/qts/iocsr_config.h  | 694 ++++++++++++++++++++++++
>  board/keymile/secu1/qts/pinmux_config.h | 218 ++++++++
>  board/keymile/secu1/qts/pll_config.h    |  83 +++
>  board/keymile/secu1/qts/sdram_config.h  | 327 +++++++++++
>  board/keymile/secu1/socfpga.c           |  67 +++
>  configs/socfpga_secu1_defconfig         |  84 +++
>  include/configs/socfpga_arria5_secu1.h  | 131 +++++

So, this is missing MAINTAINERS file. I will just manually add it:

$ cat board/keymile/secu1/MAINTAINERS
ABB SECU1 BOARD
M:      Holger Brunck <holger.brunck at ch.abb.com>
S:      Maintained
F:      include/configs/socfpga_arria5_secu1.h
F:      configs/socfpga_secu1_defconfig

is that OK ?
Holger Brunck March 4, 2020, 7:53 a.m. UTC | #2
> On 2/19/20 7:55 PM, Marek Vasut wrote:
> > From: Holger Brunck <holger.brunck at ch.abb.com>
> >
> > Add initial support for the ABB SECU board, which is an ArriaV-based
> > SoCFPGA system with ethernet and booting from Denali NAND.
> >
> > Signed-off-by: Holger Brunck <holger.brunck at ch.abb.com>
> > Cc: Ley Foon Tan <ley.foon.tan at intel.com>
> > Cc: Simon Goldschmidt <simon.k.r.goldschmidt at gmail.com>
> > ---
> > V2: Use CONFIG_SYS_I2C_EEPROM_ADDR in printf() in ivm.c
> >     Enable CONFIG_SYS_NAND_USE_FLASH_BBT
> > ---
> >  arch/arm/dts/Makefile                   |   1 +
> >  arch/arm/dts/socfpga_arria5_secu1.dts   | 130 +++++
> >  arch/arm/mach-socfpga/Kconfig           |  10 +
> >  board/keymile/Kconfig                   |  11 +-
> >  board/keymile/common/ivm.c              |  19 +-
> >  board/keymile/secu1/Makefile            |   7 +
> >  board/keymile/secu1/qts/iocsr_config.h  | 694
> > ++++++++++++++++++++++++  board/keymile/secu1/qts/pinmux_config.h |
> 218 ++++++++
> >  board/keymile/secu1/qts/pll_config.h    |  83 +++
> >  board/keymile/secu1/qts/sdram_config.h  | 327 +++++++++++
> >  board/keymile/secu1/socfpga.c           |  67 +++
> >  configs/socfpga_secu1_defconfig         |  84 +++
> >  include/configs/socfpga_arria5_secu1.h  | 131 +++++
> 
> So, this is missing MAINTAINERS file. I will just manually add it:
> 
> $ cat board/keymile/secu1/MAINTAINERS
> ABB SECU1 BOARD
> M:      Holger Brunck <holger.brunck at ch.abb.com>
> S:      Maintained
> F:      include/configs/socfpga_arria5_secu1.h
> F:      configs/socfpga_secu1_defconfig
> 
> is that OK ?

yes, thank you.

Best regards
Holger
diff mbox series

Patch

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index be4cf029d0..9c593b2c98 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -333,6 +333,7 @@  dtb-$(CONFIG_THUNDERX) += thunderx-88xx.dtb
 
 dtb-$(CONFIG_ARCH_SOCFPGA) +=				\
 	socfpga_agilex_socdk.dtb			\
+	socfpga_arria5_secu1.dtb			\
 	socfpga_arria5_socdk.dtb			\
 	socfpga_arria10_socdk_sdmmc.dtb			\
 	socfpga_cyclone5_mcvevk.dtb			\
diff --git a/arch/arm/dts/socfpga_arria5_secu1.dts b/arch/arm/dts/socfpga_arria5_secu1.dts
new file mode 100644
index 0000000000..dadf766682
--- /dev/null
+++ b/arch/arm/dts/socfpga_arria5_secu1.dts
@@ -0,0 +1,130 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016-2020 ABB
+ */
+
+#include "socfpga_arria5.dtsi"
+#include "socfpga-common-u-boot.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "ABB SoC SECU1 Board";
+	compatible = "altr,socfpga-secu1", "altr,socfpga";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x20000000>; /* 512MB */
+	};
+
+	aliases {
+		/*
+		 * this allow the ethaddr uboot environment variable contents
+		 * to be added to the gmac0 device tree blob.
+		 */
+		ethernet0 = &gmac0;
+		spi0 = &spi1;
+	};
+
+	i2c_gpio: i2c at 0 {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpios = <&portc 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)	/* SDA */
+			 &portc 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;	/* SCL */
+		i2c-gpio,delay-us = <5>;	/* ~100 kHz */
+		i2c-gpio,deblock;
+
+		temp_sensor at 48 {
+			compatible = "national,lm75";
+			reg = <0x48>;
+		};
+
+		eeprom at 50 {
+			compatible = "at,24c08";
+			reg = <0x50>;
+		};
+
+		rtc: rtc at 68 {
+			compatible = "st,m41st87";
+			reg = <0x68>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 42 0x4>;
+		};
+	};
+
+	regulator_3_3v: 3-3-v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "rgmii";
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+	bus-width = <4>;
+	u-boot,dm-pre-reloc;
+};
+
+&nand0 {
+	status = "okay";
+};
+
+&porta {
+	bank-name = "porta";
+};
+
+&portb {
+	bank-name = "portb";
+};
+
+&portc {
+	bank-name = "portc";
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&uart0 {
+	clock-frequency = <100000000>;
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&uart1 {
+	clock-frequency = <100000000>;
+};
+
+&watchdog0 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
index 969698c83f..38d6c1b2ba 100644
--- a/arch/arm/mach-socfpga/Kconfig
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -96,6 +96,11 @@  config TARGET_SOCFPGA_ARRIA10_SOCDK
 	bool "Altera SOCFPGA SoCDK (Arria 10)"
 	select TARGET_SOCFPGA_ARRIA10
 
+config TARGET_SOCFPGA_ARRIA5_SECU1
+	bool "ABB SECU1 (Arria V)"
+	select TARGET_SOCFPGA_ARRIA5
+	select VENDOR_KM
+
 config TARGET_SOCFPGA_ARRIA5_SOCDK
 	bool "Altera SOCFPGA SoCDK (Arria V)"
 	select TARGET_SOCFPGA_ARRIA5
@@ -158,6 +163,7 @@  config SYS_BOARD
 	default "de10-nano" if TARGET_SOCFPGA_TERASIC_DE10_NANO
 	default "is1" if TARGET_SOCFPGA_IS1
 	default "mcvevk" if TARGET_SOCFPGA_ARIES_MCVEVK
+	default "secu1" if TARGET_SOCFPGA_ARRIA5_SECU1
 	default "sockit" if TARGET_SOCFPGA_TERASIC_SOCKIT
 	default "socrates" if TARGET_SOCFPGA_EBV_SOCRATES
 	default "sr1500" if TARGET_SOCFPGA_SR1500
@@ -173,6 +179,7 @@  config SYS_VENDOR
 	default "aries" if TARGET_SOCFPGA_ARIES_MCVEVK
 	default "devboards" if TARGET_SOCFPGA_DEVBOARDS_DBM_SOC1
 	default "ebv" if TARGET_SOCFPGA_EBV_SOCRATES
+	default "keymile" if TARGET_SOCFPGA_ARRIA5_SECU1
 	default "softing" if TARGET_SOCFPGA_SOFTING_VINING_FPGA
 	default "terasic" if TARGET_SOCFPGA_TERASIC_DE0_NANO
 	default "terasic" if TARGET_SOCFPGA_TERASIC_DE1_SOC
@@ -184,6 +191,7 @@  config SYS_SOC
 
 config SYS_CONFIG_NAME
 	default "socfpga_agilex_socdk" if TARGET_SOCFPGA_AGILEX_SOCDK
+	default "socfpga_arria5_secu1" if TARGET_SOCFPGA_ARRIA5_SECU1
 	default "socfpga_arria5_socdk" if TARGET_SOCFPGA_ARRIA5_SOCDK
 	default "socfpga_arria10_socdk" if TARGET_SOCFPGA_ARRIA10_SOCDK
 	default "socfpga_cyclone5_socdk" if TARGET_SOCFPGA_CYCLONE5_SOCDK
@@ -199,4 +207,6 @@  config SYS_CONFIG_NAME
 	default "socfpga_stratix10_socdk" if TARGET_SOCFPGA_STRATIX10_SOCDK
 	default "socfpga_vining_fpga" if TARGET_SOCFPGA_SOFTING_VINING_FPGA
 
+source "board/keymile/Kconfig"
+
 endif
diff --git a/board/keymile/Kconfig b/board/keymile/Kconfig
index 634dbbe097..7f4cad86aa 100644
--- a/board/keymile/Kconfig
+++ b/board/keymile/Kconfig
@@ -14,6 +14,7 @@  menu "KM Board Setup"
 config KM_PNVRAM
 	hex "Pseudo RAM"
 	default 0x80000
+	depends on !ARCH_SOCFPGA
 	help
 	  Start address of the pseudo non-volatile RAM for application.
 
@@ -21,6 +22,7 @@  config KM_PHRAM
 	hex "Physical RAM"
 	default 0x17F000 if ARM
 	default 0x100000 if PPC
+	depends on !ARCH_SOCFPGA
 	help
 	  Start address of the physical RAM, which is the mounted /var folder.
 
@@ -29,6 +31,7 @@  config KM_RESERVED_PRAM
 	default 0x801000 if KIRKWOOD
 	default 0x0 if MPC83xx
 	default 0x1000 if MPC85xx
+	depends on !ARCH_SOCFPGA
 	help
 	  Reserved physical RAM area at the end of memory for special purposes.
 
@@ -37,6 +40,7 @@  config KM_CRAMFS_ADDR
 	default 0x2400000 if KIRKWOOD
 	default 0xC00000 if MPC83xx
 	default 0x2000000 if MPC85xx
+	depends on !ARCH_SOCFPGA
 	help
 	  Start address of the CRAMFS containing the Linux kernel.
 
@@ -44,13 +48,13 @@  config KM_KERNEL_ADDR
 	hex "Kernel Load Address"
 	default 0x2000000 if KIRKWOOD
 	default 0x400000 if MPC83xx
-	default 0x1000000 if MPC85xx
+	default 0x1000000 if MPC85xx || ARCH_SOCFPGA
 	help
 	  Address where to load Linux kernel in RAM.
 
 config KM_FDT_ADDR
 	hex "FDT Load Address"
-	default 0x23E0000 if KIRKWOOD
+	default 0x23E0000 if KIRKWOOD || ARCH_SOCFPGA
 	default 0xB80000 if MPC83xx
 	default 0x1F80000 if MPC85xx
 	help
@@ -71,7 +75,7 @@  config KM_DEF_NETDEV
 config KM_COMMON_ETH_INIT
 	bool "Common Ethernet Initialization"
 	default y if KIRKWOOD || MPC83xx
-	default n if MPC85xx
+	default n if MPC85xx || ARCH_SOCFPGA
 	help
 	  Use the Ethernet initialization implemented in common code, which
 	  detects if a Piggy board is present.
@@ -91,6 +95,7 @@  config KM_MVEXTSW_ADDR
 
 config KM_IVM_BUS
 	int "IVM I2C Bus"
+	default 0 if ARCH_SOCFPGA
 	default 1 if KIRKWOOD || MPC85xx
 	default 2 if MPC83xx
 	help
diff --git a/board/keymile/common/ivm.c b/board/keymile/common/ivm.c
index fee7f03c8c..60b89fe348 100644
--- a/board/keymile/common/ivm.c
+++ b/board/keymile/common/ivm.c
@@ -328,7 +328,24 @@  static int ivm_populate_env(unsigned char *buf, int len, int mac_address_offset)
 int ivm_read_eeprom(unsigned char *buf, int len, int mac_address_offset)
 {
 	int ret;
+#ifdef CONFIG_DM_I2C
+	struct udevice *eedev = NULL;
+
+	ret = i2c_get_chip_for_busnum(CONFIG_KM_IVM_BUS,
+				      CONFIG_SYS_I2C_EEPROM_ADDR, 1, &eedev);
+	if (ret) {
+		printf("failed to get device for EEPROM at address 0x%02x\n",
+		       CONFIG_SYS_I2C_EEPROM_ADDR);
+		return 1;
+	}
 
+	ret = dm_i2c_read(eedev, 0, buf, len);
+	if (ret != 0) {
+		printf("Error: Unable to read from I2C EEPROM at address %02X:%02X\n",
+		       CONFIG_SYS_I2C_EEPROM_ADDR, 0);
+		return 1;
+	}
+#else
 	i2c_set_bus_num(CONFIG_KM_IVM_BUS);
 	/* add deblocking here */
 	i2c_make_abort();
@@ -338,6 +355,6 @@  int ivm_read_eeprom(unsigned char *buf, int len, int mac_address_offset)
 		printf("Error reading EEprom\n");
 		return -2;
 	}
-
+#endif
 	return ivm_populate_env(buf, len, mac_address_offset);
 }
diff --git a/board/keymile/secu1/Makefile b/board/keymile/secu1/Makefile
new file mode 100644
index 0000000000..4704d59e48
--- /dev/null
+++ b/board/keymile/secu1/Makefile
@@ -0,0 +1,7 @@ 
+#
+# (C) Copyright 2020 ABB
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	:= socfpga.o ../common/ivm.o
diff --git a/board/keymile/secu1/qts/iocsr_config.h b/board/keymile/secu1/qts/iocsr_config.h
new file mode 100644
index 0000000000..7640c56db1
--- /dev/null
+++ b/board/keymile/secu1/qts/iocsr_config.h
@@ -0,0 +1,694 @@ 
+/* SPDX-License-Identifier: BSD-3-Clause */
+/*
+ * Altera SoCFPGA IOCSR configuration
+ */
+
+#ifndef __SOCFPGA_IOCSR_CONFIG_H__
+#define __SOCFPGA_IOCSR_CONFIG_H__
+
+#define CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH	1337
+#define CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH	1719
+#define CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH	1528
+#define CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH	16766
+
+const unsigned long iocsr_scan_chain0_table[] = {
+	0x00100000,
+	0x40000000,
+	0x00000000,
+	0x00000100,
+	0x00040000,
+	0x00008000,
+	0x00080000,
+	0x20000000,
+	0x00000000,
+	0x00000080,
+	0x00020000,
+	0x00004000,
+	0x00040000,
+	0x10000000,
+	0x00000000,
+	0x00000040,
+	0x00010000,
+	0x00002000,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000020,
+	0x00008000,
+	0x00001000,
+	0x00000000,
+	0x0300C000,
+	0x0000000C,
+	0x00000000,
+	0x00000000,
+	0x00000800,
+	0x01806018,
+	0x00000000,
+	0x01800000,
+	0x00001806,
+	0x00001806,
+	0x00000400,
+	0x00C0300C,
+	0x00C03000,
+	0x00C00003,
+	0x00000C03,
+	0x00300C03,
+	0x00000200,
+};
+
+const unsigned long iocsr_scan_chain1_table[] = {
+	0x00100000,
+	0x40000000,
+	0x00000000,
+	0x00000100,
+	0x00040000,
+	0x00008000,
+	0x00060180,
+	0x18060000,
+	0x00000000,
+	0x00000080,
+	0x00020000,
+	0x00004000,
+	0x00040000,
+	0x10000000,
+	0x00000000,
+	0x00000040,
+	0x00010000,
+	0x00002000,
+	0x00020000,
+	0x08000000,
+	0x01FE0000,
+	0xF8000000,
+	0x00000007,
+	0x00001000,
+	0x00010000,
+	0x04000000,
+	0x00000000,
+	0x00000010,
+	0x00004000,
+	0x00000800,
+	0x00006018,
+	0x01806000,
+	0x00000006,
+	0x00000008,
+	0x00601806,
+	0x00000400,
+	0x0000300C,
+	0x00C03000,
+	0x00C00000,
+	0x00000003,
+	0x00000C03,
+	0x00000200,
+	0x00000000,
+	0x00601800,
+	0x80600000,
+	0x80000001,
+	0x00000601,
+	0x00000100,
+	0x00300C03,
+	0xC0300C00,
+	0xC0300000,
+	0xC0000300,
+	0x000C0300,
+	0x00000080,
+};
+
+const unsigned long iocsr_scan_chain2_table[] = {
+	0x00100000,
+	0x40000000,
+	0x00000000,
+	0x00000100,
+	0x00040000,
+	0x00008000,
+	0x00080000,
+	0x20000000,
+	0x00000000,
+	0x00000080,
+	0x00020000,
+	0x00004000,
+	0x00040000,
+	0x10000000,
+	0x00000000,
+	0x00000040,
+	0x00010000,
+	0x00002000,
+	0x00018060,
+	0x08000000,
+	0x00000000,
+	0x00000020,
+	0x00008000,
+	0x00001000,
+	0x0300C030,
+	0x00000000,
+	0x03000000,
+	0x0000000C,
+	0x00C0300C,
+	0x00000800,
+	0x01806018,
+	0x01806000,
+	0x00000006,
+	0x00000000,
+	0x00601806,
+	0x00000400,
+	0x00C0300C,
+	0x00C03000,
+	0x00C00003,
+	0x00000C03,
+	0x00300C03,
+	0x00000200,
+	0x00601806,
+	0x80601800,
+	0x80600001,
+	0x80000601,
+	0x00180601,
+	0x00000100,
+};
+
+const unsigned long iocsr_scan_chain3_table[] = {
+	0x2CC20D80,
+	0x082000FF,
+	0x08028001,
+	0x00100000,
+	0x08020000,
+	0x00100000,
+	0x0A800000,
+	0x07900000,
+	0x08020000,
+	0x00100000,
+	0x00000000,
+	0xC0000010,
+	0x00C00512,
+	0x00000000,
+	0x00000021,
+	0x82000004,
+	0x05400000,
+	0x03C80000,
+	0x04010000,
+	0x00080000,
+	0x05400000,
+	0x03C80000,
+	0x05400000,
+	0x03C80000,
+	0xA2580000,
+	0x60001800,
+	0x00600289,
+	0x800A2580,
+	0x00000001,
+	0x40000002,
+	0x02A00000,
+	0x01E40000,
+	0x02A00000,
+	0x01E40000,
+	0x02A00000,
+	0x01E40000,
+	0x02A00000,
+	0x01E40000,
+	0x512C0000,
+	0xB0000C00,
+	0x00300144,
+	0xC00512C0,
+	0x144B0000,
+	0x20000300,
+	0x00040000,
+	0x50670000,
+	0x00000050,
+	0x24590000,
+	0x00001000,
+	0xA0000034,
+	0x0D000001,
+	0xA0680514,
+	0xC3034028,
+	0x06181A00,
+	0x805140D0,
+	0x34069A06,
+	0x01A034D0,
+	0x240D0000,
+	0x28A06809,
+	0x00000340,
+	0xD000001A,
+	0x06809240,
+	0x10040000,
+	0x00200000,
+	0x10040000,
+	0x00200000,
+	0x15000000,
+	0x0F200000,
+	0x15000000,
+	0x0F200000,
+	0x01FE0000,
+	0x80000000,
+	0x01800A25,
+	0x00289600,
+	0x007F8006,
+	0x00000000,
+	0x0A800001,
+	0x07900000,
+	0x0A800000,
+	0x07900000,
+	0x0A800000,
+	0x07900000,
+	0x08020000,
+	0x00100000,
+	0x44B00000,
+	0xC0003001,
+	0x00C00512,
+	0x00000FF0,
+	0x512C0000,
+	0x80000C00,
+	0x05400000,
+	0x02480000,
+	0x04000000,
+	0x00080000,
+	0x05400000,
+	0x03C80000,
+	0x05400000,
+	0x03C80000,
+	0x581D8000,
+	0x60001800,
+	0x00600289,
+	0x800A2580,
+	0x16076001,
+	0x40000600,
+	0x02A00040,
+	0x01E40000,
+	0x02A00000,
+	0x01E40000,
+	0x02A00000,
+	0x01E40000,
+	0x02A00000,
+	0x01E40000,
+	0x512C0000,
+	0xB0000C00,
+	0x00300144,
+	0xC00512C0,
+	0x144B0000,
+	0x20000300,
+	0x00040000,
+	0x50670000,
+	0x00000050,
+	0x24590000,
+	0x00001000,
+	0xA0000034,
+	0x0D000001,
+	0xA0680514,
+	0x4D034028,
+	0x1A681A03,
+	0x805140D0,
+	0x34069A06,
+	0x01A00020,
+	0x240D0001,
+	0x49206809,
+	0x034D0340,
+	0xD01A681A,
+	0x06805140,
+	0x10040000,
+	0x00200000,
+	0x10040000,
+	0x00200000,
+	0x15000000,
+	0x0F200000,
+	0x15000000,
+	0x0F200000,
+	0x01FE0000,
+	0x80000000,
+	0x01800A25,
+	0x00289600,
+	0x007F8006,
+	0x00000000,
+	0x99300001,
+	0x34343400,
+	0xAA0D4000,
+	0x01C3A800,
+	0xAA0D4000,
+	0x01C3A800,
+	0xAA0D4000,
+	0x01C3A800,
+	0x00040100,
+	0x00000800,
+	0x00000000,
+	0x00001208,
+	0x00482000,
+	0x01000000,
+	0x00000000,
+	0x00410482,
+	0x0006A000,
+	0x0001B400,
+	0x00020000,
+	0x00000400,
+	0x0002A000,
+	0x0001E400,
+	0x5506A000,
+	0x00E1D400,
+	0x00000000,
+	0x44B0090C,
+	0x00003001,
+	0x90400000,
+	0x00000000,
+	0x2020C243,
+	0x2A835000,
+	0x0070EA00,
+	0x2A835000,
+	0x0070EA00,
+	0x2A835000,
+	0x0070EA00,
+	0x00010040,
+	0x00000200,
+	0x00000000,
+	0x00000482,
+	0x00120800,
+	0x00002000,
+	0x80000000,
+	0x00104120,
+	0x00000200,
+	0xAC0D5F80,
+	0xFFFFFFFF,
+	0x14F3690D,
+	0x1A041414,
+	0x00D00000,
+	0x1C864000,
+	0x45147A07,
+	0xA228A3DA,
+	0xF491451E,
+	0x0358D348,
+	0x821A0000,
+	0x0000D000,
+	0x028A0680,
+	0xDA79E47A,
+	0x1EA228A3,
+	0xC8F49965,
+	0x000344B2,
+	0x00080000,
+	0x00001000,
+	0x00080200,
+	0x00001000,
+	0x000A8000,
+	0x00075000,
+	0x541A8000,
+	0x03875001,
+	0x00000000,
+	0x00000020,
+	0x0080C000,
+	0x41000000,
+	0x00003FC2,
+	0x00820000,
+	0xAA0D4000,
+	0x01C3A800,
+	0xAA0D4000,
+	0x01C3A800,
+	0xAA0D4000,
+	0x01C3A800,
+	0x00040000,
+	0x00000800,
+	0x00000000,
+	0x00001208,
+	0x00482000,
+	0x01000000,
+	0x00000000,
+	0x00410482,
+	0x0006A000,
+	0x0001B400,
+	0x00020000,
+	0x00000400,
+	0x00020080,
+	0x00000400,
+	0x5506A000,
+	0x00E1D400,
+	0x00000000,
+	0x0000090C,
+	0x00000010,
+	0x90400000,
+	0x00000000,
+	0x2020C243,
+	0x2A835000,
+	0x0070EA00,
+	0x2A835000,
+	0x0070EA00,
+	0x2A835000,
+	0x0070EA00,
+	0x00015000,
+	0x0000F200,
+	0x00000000,
+	0x00000482,
+	0x60120800,
+	0x00600289,
+	0x80000000,
+	0x00104120,
+	0x00000200,
+	0xAC0D5F80,
+	0xFFFFFFFF,
+	0x14F3690D,
+	0x1A041414,
+	0x00D00000,
+	0x14864000,
+	0x59647A05,
+	0xC228A3DC,
+	0xF491451E,
+	0x0344B2C8,
+	0x821A034D,
+	0x0000D000,
+	0x00000680,
+	0xD469A47A,
+	0x1E83CF23,
+	0xC8F71E79,
+	0x000344B2,
+	0x00080000,
+	0x00001000,
+	0x00080000,
+	0x00001000,
+	0x000A8000,
+	0x00075000,
+	0x541A8000,
+	0x03875001,
+	0x00000000,
+	0x00000020,
+	0x0080C000,
+	0x41000000,
+	0x00000002,
+	0x00820008,
+	0xAA0D4000,
+	0x01C3A800,
+	0xAA0D4000,
+	0x01C3A800,
+	0xAA0D4000,
+	0x01C3A800,
+	0x00040000,
+	0x00000800,
+	0x00000000,
+	0x00001208,
+	0x00482000,
+	0x01000000,
+	0x00000000,
+	0x00410482,
+	0x0006A000,
+	0x0001B400,
+	0x00020000,
+	0x00000400,
+	0x00020080,
+	0x00000400,
+	0x5506A000,
+	0x00E1D400,
+	0x00000000,
+	0x0000090C,
+	0x00000010,
+	0x90400000,
+	0x00000000,
+	0x2020C243,
+	0x2A835000,
+	0x0070EA00,
+	0x2A835000,
+	0x0070EA00,
+	0x2A835000,
+	0x0070EA00,
+	0x00010000,
+	0x00000200,
+	0x00000000,
+	0x00000482,
+	0x00120800,
+	0x00400000,
+	0x80000000,
+	0x00104120,
+	0x00000200,
+	0xAC0D5F80,
+	0xFFFFFFFF,
+	0x14F1690D,
+	0x1A041414,
+	0x00D00000,
+	0x0C864000,
+	0x79E47A03,
+	0x92AAA3D2,
+	0xF595551E,
+	0x034CF3C8,
+	0x821A0000,
+	0x0000D000,
+	0x00000680,
+	0xDA79E47A,
+	0x1EA32CA3,
+	0xC8F69965,
+	0x000354F3,
+	0x00080000,
+	0x00001000,
+	0x00080000,
+	0x00001000,
+	0x000A8000,
+	0x00075000,
+	0x541A8000,
+	0x03875001,
+	0x00000000,
+	0x00000020,
+	0x0080C000,
+	0x41000000,
+	0x00000002,
+	0x00820008,
+	0xAA0D4000,
+	0x01C3A800,
+	0xAA0D4000,
+	0x01C3A800,
+	0xAA0D4000,
+	0x01C3A800,
+	0x00040000,
+	0x00000800,
+	0x00000000,
+	0x00001208,
+	0x00482000,
+	0x01000000,
+	0x00000000,
+	0x00410482,
+	0x0006A000,
+	0x0001B400,
+	0x00020000,
+	0x00000400,
+	0x00020000,
+	0x00000400,
+	0x5506A000,
+	0x00E1D400,
+	0x00000000,
+	0x0000090C,
+	0x00002000,
+	0x90400000,
+	0x00000000,
+	0x2020C243,
+	0x2A835000,
+	0x0070EA00,
+	0x2A835000,
+	0x0070EA00,
+	0x2A835000,
+	0x0070EA00,
+	0x00010040,
+	0x00000200,
+	0x00000000,
+	0x00000482,
+	0x00120800,
+	0x00400000,
+	0x80000000,
+	0x00104120,
+	0x00000200,
+	0xAC0D5F80,
+	0xFFFFFFFF,
+	0x14F1690D,
+	0x1A041414,
+	0x00D00000,
+	0x0C864000,
+	0x59647A03,
+	0xC3CF23DC,
+	0xF711451E,
+	0x0358D348,
+	0x821A0000,
+	0x0000D000,
+	0x00000680,
+	0xD459647A,
+	0x1E83CF23,
+	0x48F51E79,
+	0x000348D3,
+	0x00080000,
+	0x00001000,
+	0x00080000,
+	0x00001000,
+	0x000A8000,
+	0x00075000,
+	0x541A8000,
+	0x03875001,
+	0x00000000,
+	0x00000020,
+	0x0080C000,
+	0x41000000,
+	0x00000002,
+	0x00820008,
+	0x00489800,
+	0x801A1A1A,
+	0x00000200,
+	0x80000004,
+	0x00000200,
+	0x80000004,
+	0x00000200,
+	0x00000004,
+	0x00000200,
+	0x00000004,
+	0x00040000,
+	0x10000000,
+	0x00000000,
+	0x00008000,
+	0x00010000,
+	0x40002000,
+	0x00000100,
+	0x40000002,
+	0x00000100,
+	0x00000002,
+	0x00000100,
+	0x40000002,
+	0x00000100,
+	0x00000002,
+	0x00020000,
+	0x00000000,
+	0x00000010,
+	0x00000020,
+	0x00008000,
+	0x20001000,
+	0x00000080,
+	0x20000001,
+	0x00000080,
+	0x20000001,
+	0x00000080,
+	0x20000001,
+	0x00000080,
+	0x00000001,
+	0x00010000,
+	0x04000000,
+	0x00FF0000,
+	0x00000000,
+	0x00004000,
+	0x00000800,
+	0xC0000001,
+	0x00141419,
+	0x40000000,
+	0x04000816,
+	0x000D0000,
+	0x00006800,
+	0x00000340,
+	0xD000001A,
+	0x06800000,
+	0x00340000,
+	0x0001A000,
+	0x00000D00,
+	0x40000068,
+	0x1A000003,
+	0x00D00000,
+	0x00068000,
+	0x00003400,
+	0x000001A0,
+	0x00000401,
+	0x00000008,
+	0x00000401,
+	0x00000008,
+	0x00000401,
+	0x00000008,
+	0x00000401,
+	0x80000008,
+	0x0000007F,
+	0x20000000,
+	0x00000000,
+	0xE0000080,
+	0x0000001F,
+	0x00004000,
+};
+
+#endif /* __SOCFPGA_IOCSR_CONFIG_H__ */
diff --git a/board/keymile/secu1/qts/pinmux_config.h b/board/keymile/secu1/qts/pinmux_config.h
new file mode 100644
index 0000000000..a9406060ed
--- /dev/null
+++ b/board/keymile/secu1/qts/pinmux_config.h
@@ -0,0 +1,218 @@ 
+/* SPDX-License-Identifier: BSD-3-Clause */
+/*
+ * Altera SoCFPGA PinMux configuration
+ */
+
+#ifndef __SOCFPGA_PINMUX_CONFIG_H__
+#define __SOCFPGA_PINMUX_CONFIG_H__
+
+const u8 sys_mgr_init_table[] = {
+	3, /* EMACIO0 */
+	3, /* EMACIO1 */
+	3, /* EMACIO2 */
+	3, /* EMACIO3 */
+	3, /* EMACIO4 */
+	3, /* EMACIO5 */
+	3, /* EMACIO6 */
+	3, /* EMACIO7 */
+	3, /* EMACIO8 */
+	3, /* EMACIO9 */
+	3, /* EMACIO10 */
+	3, /* EMACIO11 */
+	3, /* EMACIO12 */
+	3, /* EMACIO13 */
+	0, /* EMACIO14 */
+	0, /* EMACIO15 */
+	0, /* EMACIO16 */
+	0, /* EMACIO17 */
+	0, /* EMACIO18 */
+	0, /* EMACIO19 */
+	0, /* FLASHIO0 */
+	0, /* FLASHIO1 */
+	0, /* FLASHIO2 */
+	0, /* FLASHIO3 */
+	0, /* FLASHIO4 */
+	0, /* FLASHIO5 */
+	0, /* FLASHIO6 */
+	0, /* FLASHIO7 */
+	0, /* FLASHIO8 */
+	0, /* FLASHIO9 */
+	0, /* FLASHIO10 */
+	0, /* FLASHIO11 */
+	3, /* GENERALIO0 */
+	3, /* GENERALIO1 */
+	3, /* GENERALIO2 */
+	3, /* GENERALIO3 */
+	3, /* GENERALIO4 */
+	3, /* GENERALIO5 */
+	3, /* GENERALIO6 */
+	3, /* GENERALIO7 */
+	3, /* GENERALIO8 */
+	3, /* GENERALIO9 */
+	3, /* GENERALIO10 */
+	3, /* GENERALIO11 */
+	3, /* GENERALIO12 */
+	3, /* GENERALIO13 */
+	3, /* GENERALIO14 */
+	0, /* GENERALIO15 */
+	0, /* GENERALIO16 */
+	0, /* GENERALIO17 */
+	0, /* GENERALIO18 */
+	0, /* GENERALIO19 */
+	0, /* GENERALIO20 */
+	0, /* GENERALIO21 */
+	0, /* GENERALIO22 */
+	0, /* GENERALIO23 */
+	0, /* GENERALIO24 */
+	0, /* GENERALIO25 */
+	0, /* GENERALIO26 */
+	0, /* GENERALIO27 */
+	0, /* GENERALIO28 */
+	0, /* GENERALIO29 */
+	0, /* GENERALIO30 */
+	0, /* GENERALIO31 */
+	3, /* MIXED1IO0 */
+	3, /* MIXED1IO1 */
+	3, /* MIXED1IO2 */
+	3, /* MIXED1IO3 */
+	3, /* MIXED1IO4 */
+	3, /* MIXED1IO5 */
+	3, /* MIXED1IO6 */
+	3, /* MIXED1IO7 */
+	3, /* MIXED1IO8 */
+	3, /* MIXED1IO9 */
+	3, /* MIXED1IO10 */
+	3, /* MIXED1IO11 */
+	3, /* MIXED1IO12 */
+	3, /* MIXED1IO13 */
+	3, /* MIXED1IO14 */
+	0, /* MIXED1IO15 */
+	0, /* MIXED1IO16 */
+	0, /* MIXED1IO17 */
+	0, /* MIXED1IO18 */
+	0, /* MIXED1IO19 */
+	0, /* MIXED1IO20 */
+	0, /* MIXED1IO21 */
+	0, /* MIXED2IO0 */
+	0, /* MIXED2IO1 */
+	0, /* MIXED2IO2 */
+	0, /* MIXED2IO3 */
+	0, /* MIXED2IO4 */
+	0, /* MIXED2IO5 */
+	0, /* MIXED2IO6 */
+	0, /* MIXED2IO7 */
+	0, /* GPLINMUX48 */
+	0, /* GPLINMUX49 */
+	0, /* GPLINMUX50 */
+	0, /* GPLINMUX51 */
+	0, /* GPLINMUX52 */
+	0, /* GPLINMUX53 */
+	0, /* GPLINMUX54 */
+	0, /* GPLINMUX55 */
+	0, /* GPLINMUX56 */
+	0, /* GPLINMUX57 */
+	0, /* GPLINMUX58 */
+	0, /* GPLINMUX59 */
+	0, /* GPLINMUX60 */
+	0, /* GPLINMUX61 */
+	0, /* GPLINMUX62 */
+	0, /* GPLINMUX63 */
+	0, /* GPLINMUX64 */
+	0, /* GPLINMUX65 */
+	0, /* GPLINMUX66 */
+	0, /* GPLINMUX67 */
+	0, /* GPLINMUX68 */
+	0, /* GPLINMUX69 */
+	0, /* GPLINMUX70 */
+	1, /* GPLMUX0 */
+	1, /* GPLMUX1 */
+	1, /* GPLMUX2 */
+	1, /* GPLMUX3 */
+	1, /* GPLMUX4 */
+	1, /* GPLMUX5 */
+	1, /* GPLMUX6 */
+	1, /* GPLMUX7 */
+	1, /* GPLMUX8 */
+	1, /* GPLMUX9 */
+	1, /* GPLMUX10 */
+	1, /* GPLMUX11 */
+	1, /* GPLMUX12 */
+	1, /* GPLMUX13 */
+	1, /* GPLMUX14 */
+	1, /* GPLMUX15 */
+	1, /* GPLMUX16 */
+	1, /* GPLMUX17 */
+	1, /* GPLMUX18 */
+	1, /* GPLMUX19 */
+	1, /* GPLMUX20 */
+	1, /* GPLMUX21 */
+	1, /* GPLMUX22 */
+	1, /* GPLMUX23 */
+	1, /* GPLMUX24 */
+	1, /* GPLMUX25 */
+	1, /* GPLMUX26 */
+	1, /* GPLMUX27 */
+	1, /* GPLMUX28 */
+	1, /* GPLMUX29 */
+	1, /* GPLMUX30 */
+	1, /* GPLMUX31 */
+	1, /* GPLMUX32 */
+	1, /* GPLMUX33 */
+	1, /* GPLMUX34 */
+	1, /* GPLMUX35 */
+	1, /* GPLMUX36 */
+	1, /* GPLMUX37 */
+	1, /* GPLMUX38 */
+	1, /* GPLMUX39 */
+	1, /* GPLMUX40 */
+	1, /* GPLMUX41 */
+	1, /* GPLMUX42 */
+	1, /* GPLMUX43 */
+	1, /* GPLMUX44 */
+	1, /* GPLMUX45 */
+	1, /* GPLMUX46 */
+	1, /* GPLMUX47 */
+	1, /* GPLMUX48 */
+	1, /* GPLMUX49 */
+	1, /* GPLMUX50 */
+	1, /* GPLMUX51 */
+	1, /* GPLMUX52 */
+	1, /* GPLMUX53 */
+	1, /* GPLMUX54 */
+	1, /* GPLMUX55 */
+	1, /* GPLMUX56 */
+	1, /* GPLMUX57 */
+	1, /* GPLMUX58 */
+	1, /* GPLMUX59 */
+	1, /* GPLMUX60 */
+	1, /* GPLMUX61 */
+	1, /* GPLMUX62 */
+	1, /* GPLMUX63 */
+	1, /* GPLMUX64 */
+	1, /* GPLMUX65 */
+	1, /* GPLMUX66 */
+	1, /* GPLMUX67 */
+	1, /* GPLMUX68 */
+	1, /* GPLMUX69 */
+	1, /* GPLMUX70 */
+	0, /* NANDUSEFPGA */
+	0, /* UART0USEFPGA */
+	0, /* RGMII1USEFPGA */
+	0, /* SPIS0USEFPGA */
+	0, /* CAN0USEFPGA */
+	0, /* I2C0USEFPGA */
+	0, /* SDMMCUSEFPGA */
+	0, /* QSPIUSEFPGA */
+	0, /* SPIS1USEFPGA */
+	0, /* RGMII0USEFPGA */
+	0, /* UART1USEFPGA */
+	0, /* CAN1USEFPGA */
+	0, /* USB1USEFPGA */
+	0, /* I2C3USEFPGA */
+	0, /* I2C2USEFPGA */
+	0, /* I2C1USEFPGA */
+	1, /* SPIM1USEFPGA */
+	0, /* USB0USEFPGA */
+	0 /* SPIM0USEFPGA */
+};
+#endif /* __SOCFPGA_PINMUX_CONFIG_H__ */
diff --git a/board/keymile/secu1/qts/pll_config.h b/board/keymile/secu1/qts/pll_config.h
new file mode 100644
index 0000000000..f0c31860ca
--- /dev/null
+++ b/board/keymile/secu1/qts/pll_config.h
@@ -0,0 +1,83 @@ 
+/* SPDX-License-Identifier: BSD-3-Clause */
+/*
+ * Altera SoCFPGA Clock and PLL configuration
+ */
+
+#ifndef __SOCFPGA_PLL_CONFIG_H__
+#define __SOCFPGA_PLL_CONFIG_H__
+
+#define CONFIG_HPS_DBCTRL_STAYOSC1 1
+
+#define CONFIG_HPS_MAINPLLGRP_VCO_DENOM 0
+#define CONFIG_HPS_MAINPLLGRP_VCO_NUMER 39
+#define CONFIG_HPS_MAINPLLGRP_MPUCLK_CNT 0
+#define CONFIG_HPS_MAINPLLGRP_MAINCLK_CNT 0
+#define CONFIG_HPS_MAINPLLGRP_DBGATCLK_CNT 0
+#define CONFIG_HPS_MAINPLLGRP_MAINQSPICLK_CNT 511
+#define CONFIG_HPS_MAINPLLGRP_MAINNANDSDMMCCLK_CNT 511
+#define CONFIG_HPS_MAINPLLGRP_CFGS2FUSER0CLK_CNT 15
+#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3MPCLK 1
+#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3SPCLK 1
+#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L4MPCLK 1
+#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L4SPCLK 1
+#define CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGATCLK 0
+#define CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGCLK 1
+#define CONFIG_HPS_MAINPLLGRP_TRACEDIV_TRACECLK 0
+#define CONFIG_HPS_MAINPLLGRP_L4SRC_L4MP 1
+#define CONFIG_HPS_MAINPLLGRP_L4SRC_L4SP 1
+
+#define CONFIG_HPS_PERPLLGRP_VCO_DENOM 0
+#define CONFIG_HPS_PERPLLGRP_VCO_NUMER 24
+#define CONFIG_HPS_PERPLLGRP_VCO_PSRC 0
+#define CONFIG_HPS_PERPLLGRP_EMAC0CLK_CNT 3
+#define CONFIG_HPS_PERPLLGRP_EMAC1CLK_CNT 511
+#define CONFIG_HPS_PERPLLGRP_PERQSPICLK_CNT 511
+#define CONFIG_HPS_PERPLLGRP_PERNANDSDMMCCLK_CNT 7
+#define CONFIG_HPS_PERPLLGRP_PERBASECLK_CNT 4
+#define CONFIG_HPS_PERPLLGRP_S2FUSER1CLK_CNT 511
+#define CONFIG_HPS_PERPLLGRP_DIV_USBCLK 4
+#define CONFIG_HPS_PERPLLGRP_DIV_SPIMCLK 0
+#define CONFIG_HPS_PERPLLGRP_DIV_CAN0CLK 4
+#define CONFIG_HPS_PERPLLGRP_DIV_CAN1CLK 4
+#define CONFIG_HPS_PERPLLGRP_GPIODIV_GPIODBCLK 6249
+#define CONFIG_HPS_PERPLLGRP_SRC_SDMMC 1
+#define CONFIG_HPS_PERPLLGRP_SRC_NAND 2
+#define CONFIG_HPS_PERPLLGRP_SRC_QSPI 1
+
+#define CONFIG_HPS_SDRPLLGRP_VCO_DENOM 0
+#define CONFIG_HPS_SDRPLLGRP_VCO_NUMER 14
+#define CONFIG_HPS_SDRPLLGRP_VCO_SSRC 0
+#define CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_CNT 1
+#define CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_PHASE 0
+#define CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_CNT 0
+#define CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_PHASE 0
+#define CONFIG_HPS_SDRPLLGRP_DDRDQCLK_CNT 1
+#define CONFIG_HPS_SDRPLLGRP_DDRDQCLK_PHASE 4
+#define CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_CNT 1
+#define CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_PHASE 0
+
+#define CONFIG_HPS_CLK_OSC1_HZ 40000000
+#define CONFIG_HPS_CLK_OSC2_HZ 40000000
+#define CONFIG_HPS_CLK_F2S_SDR_REF_HZ 0
+#define CONFIG_HPS_CLK_F2S_PER_REF_HZ 0
+#define CONFIG_HPS_CLK_MAINVCO_HZ 1600000000
+#define CONFIG_HPS_CLK_PERVCO_HZ 1000000000
+#define CONFIG_HPS_CLK_SDRVCO_HZ 600000000
+#define CONFIG_HPS_CLK_EMAC0_HZ 250000000
+#define CONFIG_HPS_CLK_EMAC1_HZ 1953125
+#define CONFIG_HPS_CLK_USBCLK_HZ 12500000
+#define CONFIG_HPS_CLK_NAND_HZ 31250000
+#define CONFIG_HPS_CLK_SDMMC_HZ 3125000
+#define CONFIG_HPS_CLK_QSPI_HZ 3125000
+#define CONFIG_HPS_CLK_SPIM_HZ 200000000
+#define CONFIG_HPS_CLK_CAN0_HZ 12500000
+#define CONFIG_HPS_CLK_CAN1_HZ 12500000
+#define CONFIG_HPS_CLK_GPIODB_HZ 32000
+#define CONFIG_HPS_CLK_L4_MP_HZ 100000000
+#define CONFIG_HPS_CLK_L4_SP_HZ 100000000
+
+#define CONFIG_HPS_ALTERAGRP_MPUCLK 1
+#define CONFIG_HPS_ALTERAGRP_MAINCLK 3
+#define CONFIG_HPS_ALTERAGRP_DBGATCLK 3
+
+#endif /* __SOCFPGA_PLL_CONFIG_H__ */
diff --git a/board/keymile/secu1/qts/sdram_config.h b/board/keymile/secu1/qts/sdram_config.h
new file mode 100644
index 0000000000..b0ff86ef38
--- /dev/null
+++ b/board/keymile/secu1/qts/sdram_config.h
@@ -0,0 +1,327 @@ 
+/* SPDX-License-Identifier: BSD-3-Clause */
+/*
+ * Altera SoCFPGA SDRAM configuration
+ *
+ */
+
+#ifndef __SOCFPGA_SDRAM_CONFIG_H__
+#define __SOCFPGA_SDRAM_CONFIG_H__
+
+/* SDRAM configuration */
+#define CONFIG_HPS_SDR_CTRLCFG_CPORTRDWR_CPORTRDWR		0x5A56A
+#define CONFIG_HPS_SDR_CTRLCFG_CPORTRMAP_CPORTRMAP		0xB00088
+#define CONFIG_HPS_SDR_CTRLCFG_CPORTWIDTH_CPORTWIDTH		0x44555
+#define CONFIG_HPS_SDR_CTRLCFG_CPORTWMAP_CPORTWMAP		0x2C011000
+#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ADDRORDER		0
+#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_DQSTRKEN			0
+#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCCORREN		0
+#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCEN			0
+#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMBL			8
+#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMTYPE			1
+#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_NODMPINS			0
+#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_REORDEREN		1
+#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_STARVELIMIT		10
+#define CONFIG_HPS_SDR_CTRLCFG_CTRLWIDTH_CTRLWIDTH		2
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_BANKBITS		3
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_COLBITS		10
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_CSBITS			1
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_ROWBITS		14
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMDEVWIDTH_DEVWIDTH		8
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMIFWIDTH_IFWIDTH		32
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMINTR_INTREN			0
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMODT_READ			0
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMODT_WRITE			1
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_AL			0
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCL			5
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCWL			4
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TFAW			16
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRFC			60
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRRD			4
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRCD		5
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TREFI		2341
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRP		5
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWR		5
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWTR		2
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TCCD			4
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TMRD			2
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRAS			13
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRC			17
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRTP			3
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_PWRDOWNEXIT		3
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_SELFRFSHEXIT		200
+#define CONFIG_HPS_SDR_CTRLCFG_EXTRATIME1_CFG_EXTRA_CTL_CLK_RD_TO_WR 3
+#define CONFIG_HPS_SDR_CTRLCFG_EXTRATIME1_CFG_EXTRA_CTL_CLK_RD_TO_WR_BC 3
+#define CONFIG_HPS_SDR_CTRLCFG_EXTRATIME1_CFG_EXTRA_CTL_CLK_RD_TO_WR_DIFF_CHIP 3
+#define CONFIG_HPS_SDR_CTRLCFG_FIFOCFG_INCSYNC			0
+#define CONFIG_HPS_SDR_CTRLCFG_FIFOCFG_SYNCMODE			0
+#define CONFIG_HPS_SDR_CTRLCFG_FPGAPORTRST			0x0
+#define CONFIG_HPS_SDR_CTRLCFG_LOWPWREQ_SELFRFSHMASK		3
+#define CONFIG_HPS_SDR_CTRLCFG_LOWPWRTIMING_AUTOPDCYCLES	0
+#define CONFIG_HPS_SDR_CTRLCFG_LOWPWRTIMING_CLKDISABLECYCLES	8
+#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_0_THRESHOLD1_31_0	0x20820820
+#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_1_THRESHOLD1_59_32	0x8208208
+#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_1_THRESHOLD2_3_0	0
+#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_2_THRESHOLD2_35_4	0x41041041
+#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_3_THRESHOLD2_59_36	0x410410
+#define CONFIG_HPS_SDR_CTRLCFG_MPPRIORITY_USERPRIORITY		0x0
+#define CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_0_THRESHOLDRSTCYCLES_31_0 0x01010101
+#define CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_1_THRESHOLDRSTCYCLES_63_32 0x01010101
+#define CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_2_THRESHOLDRSTCYCLES_79_64 0x0101
+#define CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_0_STATICWEIGHT_31_0	0x21084210
+#define CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_1_STATICWEIGHT_49_32	0x10441
+#define CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_1_SUMOFWEIGHT_13_0	0x78
+#define CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_2_SUMOFWEIGHT_45_14	0x0
+#define CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_3_SUMOFWEIGHT_63_46	0x0
+#define CONFIG_HPS_SDR_CTRLCFG_PHYCTRL_PHYCTRL_0		0x200
+#define CONFIG_HPS_SDR_CTRLCFG_PORTCFG_AUTOPCHEN		0
+#define CONFIG_HPS_SDR_CTRLCFG_RFIFOCMAP_RFIFOCMAP		0x760210
+#define CONFIG_HPS_SDR_CTRLCFG_STATICCFG_MEMBL			2
+#define CONFIG_HPS_SDR_CTRLCFG_STATICCFG_USEECCASDATA		0
+#define CONFIG_HPS_SDR_CTRLCFG_WFIFOCMAP_WFIFOCMAP		0x980543
+
+/* Sequencer auto configuration */
+#define RW_MGR_ACTIVATE_0_AND_1	0x11
+#define RW_MGR_ACTIVATE_0_AND_1_WAIT1	0x12
+#define RW_MGR_ACTIVATE_0_AND_1_WAIT2	0x14
+#define RW_MGR_CLEAR_DQS_ENABLE	0x4B
+#define RW_MGR_EMR	0x09
+#define RW_MGR_EMR2	0x0D
+#define RW_MGR_EMR3	0x0F
+#define RW_MGR_EMR_OCD_ENABLE	0x0B
+#define RW_MGR_GUARANTEED_READ	0x4E
+#define RW_MGR_GUARANTEED_READ_CONT	0x56
+#define RW_MGR_GUARANTEED_WRITE	0x1A
+#define RW_MGR_GUARANTEED_WRITE_WAIT0	0x1D
+#define RW_MGR_GUARANTEED_WRITE_WAIT1	0x21
+#define RW_MGR_GUARANTEED_WRITE_WAIT2	0x1B
+#define RW_MGR_GUARANTEED_WRITE_WAIT3	0x1F
+#define RW_MGR_IDLE	0x00
+#define RW_MGR_IDLE_LOOP1	0x77
+#define RW_MGR_IDLE_LOOP2	0x76
+#define RW_MGR_INIT_CKE_0	0x71
+#define RW_MGR_LFSR_WR_RD_BANK_0	0x24
+#define RW_MGR_LFSR_WR_RD_BANK_0_DATA	0x27
+#define RW_MGR_LFSR_WR_RD_BANK_0_DQS	0x26
+#define RW_MGR_LFSR_WR_RD_BANK_0_NOP	0x25
+#define RW_MGR_LFSR_WR_RD_BANK_0_WAIT	0x34
+#define RW_MGR_LFSR_WR_RD_BANK_0_WL_1	0x23
+#define RW_MGR_LFSR_WR_RD_DM_BANK_0	0x38
+#define RW_MGR_LFSR_WR_RD_DM_BANK_0_DATA	0x3B
+#define RW_MGR_LFSR_WR_RD_DM_BANK_0_DQS	0x3A
+#define RW_MGR_LFSR_WR_RD_DM_BANK_0_NOP	0x39
+#define RW_MGR_LFSR_WR_RD_DM_BANK_0_WAIT	0x48
+#define RW_MGR_LFSR_WR_RD_DM_BANK_0_WL_1	0x37
+#define RW_MGR_MR_CALIB	0x05
+#define RW_MGR_MR_DLL_RESET	0x07
+#define RW_MGR_MR_USER	0x03
+#define RW_MGR_NOP	0x01
+#define RW_MGR_PRECHARGE_ALL	0x16
+#define RW_MGR_READ_B2B	0x5B
+#define RW_MGR_READ_B2B_WAIT1	0x63
+#define RW_MGR_READ_B2B_WAIT2	0x6D
+#define RW_MGR_REFRESH	0x18
+
+/* Sequencer defines configuration */
+#define AFI_CLK_FREQ	301
+#define AFI_RATE_RATIO	1
+#define CALIB_LFIFO_OFFSET	6
+#define CALIB_VFIFO_OFFSET	4
+#define ENABLE_SUPER_QUICK_CALIBRATION	0
+#define IO_DELAY_PER_DCHAIN_TAP	25
+#define IO_DELAY_PER_DQS_EN_DCHAIN_TAP	25
+#define IO_DELAY_PER_OPA_TAP	416
+#define IO_DLL_CHAIN_LENGTH	8
+#define IO_DQDQS_OUT_PHASE_MAX	0
+#define IO_DQS_EN_DELAY_MAX	31
+#define IO_DQS_EN_DELAY_OFFSET	0
+#define IO_DQS_EN_PHASE_MAX	7
+#define IO_DQS_IN_DELAY_MAX	31
+#define IO_DQS_IN_RESERVE	4
+#define IO_DQS_OUT_RESERVE	4
+#define IO_IO_IN_DELAY_MAX	31
+#define IO_IO_OUT1_DELAY_MAX	31
+#define IO_IO_OUT2_DELAY_MAX	0
+#define IO_SHIFT_DQS_EN_WHEN_SHIFT_DQS	0
+#define MAX_LATENCY_COUNT_WIDTH	5
+#define READ_VALID_FIFO_SIZE	16
+#define REG_FILE_INIT_SEQ_SIGNATURE	0x555504bf
+#define RW_MGR_MEM_ADDRESS_MIRRORING	0
+#define RW_MGR_MEM_DATA_MASK_WIDTH	4
+#define RW_MGR_MEM_DATA_WIDTH	32
+#define RW_MGR_MEM_DQ_PER_READ_DQS	8
+#define RW_MGR_MEM_DQ_PER_WRITE_DQS	8
+#define RW_MGR_MEM_IF_READ_DQS_WIDTH	4
+#define RW_MGR_MEM_IF_WRITE_DQS_WIDTH	4
+#define RW_MGR_MEM_NUMBER_OF_CS_PER_DIMM	1
+#define RW_MGR_MEM_NUMBER_OF_RANKS	1
+#define RW_MGR_MEM_VIRTUAL_GROUPS_PER_READ_DQS	1
+#define RW_MGR_MEM_VIRTUAL_GROUPS_PER_WRITE_DQS	1
+#define RW_MGR_TRUE_MEM_DATA_MASK_WIDTH	4
+#define TINIT_CNTR0_VAL	74
+#define TINIT_CNTR1_VAL	20
+#define TINIT_CNTR2_VAL	20
+#define TRESET_CNTR0_VAL	74
+#define TRESET_CNTR1_VAL	99
+#define TRESET_CNTR2_VAL	10
+
+/* Sequencer ac_rom_init configuration */
+const u32 ac_rom_init[] = {
+	0x30700000,
+	0x38700000,
+	0x30700000,
+	0x20700000,
+	0x10000853,
+	0x10000853,
+	0x10000953,
+	0x10010000,
+	0x10010380,
+	0x10020000,
+	0x10030000,
+	0x10300400,
+	0x10600000,
+	0x10620000,
+	0x10200400,
+	0x10400000,
+	0x1c900000,
+	0x1c920000,
+	0x1c900008,
+	0x1c920008,
+	0x38f00000,
+	0x3cf00000,
+	0x38700000,
+	0x10100000,
+	0x18900000,
+	0x13500000,
+	0x13520000,
+	0x13500008,
+	0x13520008,
+	0x33700000,
+	0x10500008
+};
+
+/* Sequencer inst_rom_init configuration */
+const u32 inst_rom_init[] = {
+	0x80180,
+	0x100,
+	0x80000,
+	0x200,
+	0x80000,
+	0x280,
+	0x80000,
+	0x300,
+	0x80000,
+	0x380,
+	0x80000,
+	0x400,
+	0x80000,
+	0x480,
+	0x80000,
+	0x500,
+	0x80000,
+	0x600,
+	0x8000,
+	0x680,
+	0xa000,
+	0x80000,
+	0x700,
+	0x80000,
+	0x780,
+	0x80000,
+	0x968,
+	0xcae8,
+	0x8e8,
+	0x8ae8,
+	0x988,
+	0xea88,
+	0x808,
+	0xaa88,
+	0x80000,
+	0xcc00,
+	0xcb80,
+	0xe080,
+	0xa00,
+	0x20ae0,
+	0x20ae0,
+	0x20ae0,
+	0x20ae0,
+	0xb00,
+	0x0,
+	0x0,
+	0x0,
+	0x0,
+	0x60c80,
+	0x60e80,
+	0x60e80,
+	0x60e80,
+	0xa000,
+	0x8000,
+	0x80000,
+	0xcc00,
+	0xcb80,
+	0xe080,
+	0xa00,
+	0x30ae0,
+	0x30ae0,
+	0x30ae0,
+	0x30ae0,
+	0xb00,
+	0x0,
+	0x0,
+	0x0,
+	0x0,
+	0x70c80,
+	0x70e80,
+	0x70e80,
+	0x70e80,
+	0xa000,
+	0x8000,
+	0x80000,
+	0xf58,
+	0x58,
+	0x80000,
+	0xf68,
+	0x168,
+	0x168,
+	0x8168,
+	0x40de8,
+	0x40ee8,
+	0x40ee8,
+	0x40ee8,
+	0xf68,
+	0x168,
+	0x168,
+	0xa168,
+	0x80000,
+	0x40c88,
+	0x40e88,
+	0x40e88,
+	0x40e88,
+	0x40d68,
+	0x40ee8,
+	0x40ee8,
+	0x40ee8,
+	0xa000,
+	0x40de8,
+	0x40ee8,
+	0x40ee8,
+	0x40ee8,
+	0x40e08,
+	0x40e88,
+	0x40e88,
+	0x40e88,
+	0xf00,
+	0xc000,
+	0x8000,
+	0xe000,
+	0x80000,
+	0x180,
+	0x8180,
+	0xa180,
+	0xc180,
+	0x80180,
+	0x8000,
+	0xa000,
+	0x80000
+};
+
+#endif /* __SOCFPGA_SDRAM_CONFIG_H__ */
diff --git a/board/keymile/secu1/socfpga.c b/board/keymile/secu1/socfpga.c
new file mode 100644
index 0000000000..dc04a21abe
--- /dev/null
+++ b/board/keymile/secu1/socfpga.c
@@ -0,0 +1,67 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017-2020 ABB
+ */
+#include <common.h>
+#include <i2c.h>
+#include <asm/gpio.h>
+
+#include "../common/common.h"
+
+/*
+ * For FU1, the MAC address associated with the mgmt port should
+ * be the base address (as read from the IVM) + 4, and for FU2 it
+ * is + 10
+ */
+#define MAC_ADDRESS_OFFSET_FU1	4
+#define MAC_ADDRESS_OFFSET_FU2	10
+
+/*
+ * This function reads the state of GPIO40 and returns true (non-zero)
+ * if it is '1' and false(0) otherwise.
+ *
+ * This pin is routed to a pull-up on FU2 and a pull-down on
+ */
+#define GPIO_FU_DETECTION	40
+
+int secu1_is_fu2(void)
+{
+	int value;
+	int ret = gpio_request(GPIO_FU_DETECTION, "secu");
+
+	if (ret) {
+		printf("gpio: failed to request pin for FU  detection\n");
+		return 1;
+	}
+	gpio_direction_input(GPIO_FU_DETECTION);
+	value = gpio_get_value(GPIO_FU_DETECTION);
+
+	if (value == 1)
+		printf("FU2 detected\n");
+	else
+		printf("FU1 detected\n");
+
+	return value;
+}
+
+static uchar ivm_content[CONFIG_SYS_IVM_EEPROM_MAX_LEN];
+
+#if defined(CONFIG_HUSH_INIT_VAR)
+int hush_init_var(void)
+{
+	ivm_analyze_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
+	return 0;
+}
+#endif
+
+int misc_init_r(void)
+{
+	if (secu1_is_fu2())
+		ivm_read_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN,
+				MAC_ADDRESS_OFFSET_FU2);
+	else
+		ivm_read_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN,
+				MAC_ADDRESS_OFFSET_FU1);
+
+	return 0;
+}
diff --git a/configs/socfpga_secu1_defconfig b/configs/socfpga_secu1_defconfig
new file mode 100644
index 0000000000..230959ec86
--- /dev/null
+++ b/configs/socfpga_secu1_defconfig
@@ -0,0 +1,84 @@ 
+CONFIG_ARM=y
+CONFIG_ARCH_SOCFPGA=y
+CONFIG_SYS_MALLOC_F_LEN=0x800
+CONFIG_ENV_SIZE=0x1000
+CONFIG_ENV_OFFSET=0x100000
+CONFIG_DM_GPIO=y
+# CONFIG_SPL_MMC_SUPPORT is not set
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_TARGET_SOCFPGA_ARRIA5_SECU1=y
+CONFIG_ENV_OFFSET_REDUND=0x120000
+# CONFIG_SPL_LIBDISK_SUPPORT is not set
+# CONFIG_SPL_SPI_SUPPORT is not set
+CONFIG_SPL_TEXT_BASE=0xFFFF0000
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BUILD_TARGET="u-boot-with-nand-spl.sfp"
+CONFIG_FIT=y
+# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
+CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
+CONFIG_DEFAULT_FDT_FILE="socfpga_arria5_secu1.dtb"
+CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK=y
+# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
+# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION is not set
+CONFIG_SPL_MTD_SUPPORT=y
+CONFIG_CMD_ASKENV=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_EEPROM=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND_TRIMFFS=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_WDT=y
+CONFIG_CMD_CACHE=y
+CONFIG_MTDIDS_DEFAULT="nand0=denali-nand"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=denali-nand:512k(nand.4spl),512k(nand.uboot),128k(nand.env1),128k(nand.env2),0x1000000(nand.rec),0x3ee40000(nand.ubi),0x80000 at 0x3ff80000(nand.bbt)"
+CONFIG_CMD_UBI=y
+# CONFIG_CMD_UBIFS is not set
+# CONFIG_ISO_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria5_secu1"
+CONFIG_ENV_IS_IN_NAND=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+# CONFIG_SPL_BLK is not set
+CONFIG_DWAPB_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_DM_I2C_GPIO=y
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x50
+CONFIG_SYS_EEPROM_SIZE=1024
+CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
+CONFIG_DM_MMC=y
+CONFIG_MMC_DW=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_SYS_NAND_USE_FLASH_BBT=y
+CONFIG_NAND_DENALI_DT=y
+CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=2
+CONFIG_SPL_NAND_DENALI=y
+# CONFIG_DM_SPI_FLASH is not set
+CONFIG_MTD_UBI_FASTMAP=y
+CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1
+CONFIG_MV88E6352_SWITCH=y
+CONFIG_PHY_FIXED=y
+CONFIG_DM_ETH=y
+CONFIG_PHY_GIGE=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_MII=y
+CONFIG_DM_RESET=y
+CONFIG_SPI=y
+CONFIG_SPI_MEM=y
+CONFIG_DESIGNWARE_SPI=y
+CONFIG_DESIGNWARE_WATCHDOG=y
+CONFIG_WDT=y
+# CONFIG_GZIP is not set
diff --git a/include/configs/socfpga_arria5_secu1.h b/include/configs/socfpga_arria5_secu1.h
new file mode 100644
index 0000000000..b059100ccd
--- /dev/null
+++ b/include/configs/socfpga_arria5_secu1.h
@@ -0,0 +1,131 @@ 
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2017-2020 ABB
+ *
+ */
+#ifndef __CONFIG_SOCFPGA_SECU1_H__
+#define __CONFIG_SOCFPGA_SECU1_H__
+
+#include <asm/arch/base_addr_ac5.h>
+
+/* Call misc_init_r */
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_HUSH_INIT_VAR
+/* Eternal oscillator */
+#define CONFIG_SYS_TIMER_RATE	40000000
+
+/* Memory configurations */
+#define PHYS_SDRAM_1_SIZE	0x20000000	/* 512MiB on SECU1 */
+
+/*
+ * We use bootcounter in i2c nvram of the RTC (0x68)
+ * The offset fopr the bootcounter is 0x9e, which are
+ * the last two bytes of the 128 bytes large NVRAM in the
+ * RTC which begin at address 0x20
+ */
+#define CONFIG_SYS_I2C_RTC_ADDR         0x68
+
+/* Booting Linux */
+#define CONFIG_BOOTDELAY	2
+#define CONFIG_BOOTFILE		"zImage"
+#define CONFIG_BOOTARGS		\
+	"console=ttyS0," __stringify(CONFIG_BAUDRATE) \
+	" ubi.fm_autoconvert=1" \
+	" uio_pdrv_genirq.of_id=\"idq,regbank\""
+
+#define CONFIG_BOOTCOMMAND	\
+	"setenv bootcmd '"	\
+		"bridge enable; "	\
+		"if test ${bootnum} = \"b\"; " \
+		      "then run _fpga_loadsafe; " \
+		"else if test ${bootcount} -eq 4; then echo \"Switching copy...\"; setexpr x $bootnum % 2 && setexpr bootnum $x + 1; saveenv; fi; " \
+		      "run _fpga_loaduser; " \
+		"fi;" \
+		"echo \"Booting bank $bootnum\" && run userload && run userboot;" \
+	"' && " \
+	"setenv altbootcmd 'setenv bootnum b && saveenv && boot;' && " \
+	"saveenv && saveenv && boot;"
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SYS_BOOTM_LEN		(64 << 20)
+
+/* Environment settings */
+#define CONFIG_ENV_OVERWRITE
+
+/*
+ * Autoboot
+ *
+ * After 45s of inactivity in the prompt, the board will reset.
+ * Set 'bootretry' in the environment to -1 to disable this behavior
+ */
+#define CONFIG_BOOT_RETRY_TIME 45
+#define CONFIG_RESET_TO_RETRY
+
+#define CONFIG_LOADADDR		0x01000000
+#define CONFIG_SYS_LOAD_ADDR   CONFIG_KM_KERNEL_ADDR
+
+/*
+ * FPGA Remote Update related environment
+ *
+ * Note that since those commands access the FPGA, the HPS-to-FPGA
+ * bridges MUST have been previously enabled (for example
+ * with 'bridge enable').
+ */
+#define FPGA_RMTU_ENV \
+	"rmtu_page=0xFF29000C\0" \
+	"rmtu_reconfig=0xFF290018\0" \
+	"fpga_safebase=0x0\0" \
+	"fpga_userbase=0x2000000\0" \
+	"_fpga_loaduser=echo Loading FPGA USER image..." \
+		" && mw ${rmtu_page} ${fpga_userbase} && mw ${rmtu_reconfig} 1\0" \
+	"_fpga_loadsafe=echo Loading FPGA SAFE image..." \
+		" && mw ${rmtu_page} ${fpga_safebase} && mw ${rmtu_reconfig} 1\0" \
+
+#define CONFIG_KM_NEW_ENV \
+	"newenv=" \
+		"nand erase 0x100000 0x40000\0"
+
+#define CONFIG_KM_DEF_ENV_BOOTTARGETS \
+	"release=" \
+		"run newenv; reset\0" \
+	"develop=" \
+		"tftp 0x200000 scripts/develop-secu.txt && env import -t 0x200000 ${filesize} && saveenv && reset\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	FPGA_RMTU_ENV \
+	CONFIG_KM_DEF_ENV_BOOTTARGETS \
+	CONFIG_KM_NEW_ENV \
+	"socfpga_legacy_reset_compat=1\0"	\
+	"altbootcmd=run bootcmd;\0"	\
+	"bootlimit=6\0"	\
+	"bootnum=1\0" \
+	"bootretry=" __stringify(CONFIG_BOOT_RETRY_TIME) "\0" \
+	"fdt_addr=" __stringify(CONFIG_KM_FDT_ADDR) "\0" \
+	"load=tftpboot ${loadaddr} u-boot-with-nand-spl.sfp\0" \
+	"loadaddr=" __stringify(CONFIG_KM_KERNEL_ADDR) "\0" \
+	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
+	"update=nand erase 0x0 0x00100000 && nand write ${loadaddr} 0x0 ${filesize}\0" \
+	"userload=ubi part nand.ubi &&" \
+		"ubi check rootfs$bootnum &&" \
+		"ubi read $fdt_addr dtb$bootnum &&" \
+		"ubi read $loadaddr kernel$bootnum\0" \
+	"userboot=setenv bootargs " CONFIG_BOOTARGS \
+		" ubi.mtd=1 ubi.block=0,rootfs$bootnum root=/dev/ubiblock0_$ubivolid"	\
+		" ro rootfstype=squashfs init=sbin/preinit;" \
+		"bootz ${loadaddr} - ${fdt_addr}\0" \
+	"verify=y\0"
+
+/* The rest of the configuration is shared */
+#include <configs/socfpga_common.h>
+
+#ifdef CONFIG_SPL_NAND_SUPPORT
+#undef CONFIG_SYS_NAND_U_BOOT_OFFS
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
+#endif
+
+#undef CONFIG_WATCHDOG_TIMEOUT_MSECS
+#define CONFIG_WATCHDOG_TIMEOUT_MSECS	60000
+
+#endif	/* __CONFIG_SOCFPGA_SECU1_H__ */