@@ -598,15 +598,6 @@ config TARGET_X600
select PL011_SERIAL
select SUPPORT_SPL
-config TARGET_WOODBURN
- bool "Support woodburn"
- select CPU_ARM1136
-
-config TARGET_WOODBURN_SD
- bool "Support woodburn_sd"
- select CPU_ARM1136
- select SUPPORT_SPL
-
config TARGET_FLEA3
bool "Support flea3"
select CPU_ARM1136
@@ -1880,7 +1871,6 @@ source "board/birdland/bav335x/Kconfig"
source "board/toradex/colibri_pxa270/Kconfig"
source "board/variscite/dart_6ul/Kconfig"
source "board/vscom/baltos/Kconfig"
-source "board/woodburn/Kconfig"
source "board/xilinx/Kconfig"
source "board/xilinx/zynq/Kconfig"
source "board/xilinx/zynqmp/Kconfig"
deleted file mode 100644
@@ -1,25 +0,0 @@
-if TARGET_WOODBURN
-
-config SYS_BOARD
- default "woodburn"
-
-config SYS_SOC
- default "mx35"
-
-config SYS_CONFIG_NAME
- default "woodburn"
-
-endif
-
-if TARGET_WOODBURN_SD
-
-config SYS_BOARD
- default "woodburn"
-
-config SYS_SOC
- default "mx35"
-
-config SYS_CONFIG_NAME
- default "woodburn_sd"
-
-endif
deleted file mode 100644
@@ -1,12 +0,0 @@
-WOODBURN BOARD
-M: Stefano Babic <sbabic at denx.de>
-S: Maintained
-F: board/woodburn/
-F: include/configs/woodburn.h
-F: configs/woodburn_defconfig
-
-WOODBURN_SD BOARD
-#M: -
-S: Maintained
-F: include/configs/woodburn_sd.h
-F: configs/woodburn_sd_defconfig
deleted file mode 100644
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2007, Guennadi Liakhovetski <lg at denx.de>
-#
-# (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
-
-obj-y := woodburn.o
-obj-y += lowlevel_init.o
deleted file mode 100644
@@ -1,4 +0,0 @@
-BOOT_FROM sd
-
-/* DDR2 init */
-DATA 4 0xB8001010 0x00000304
deleted file mode 100644
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2007, Guennadi Liakhovetski <lg at denx.de>
- *
- * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
- *
- * Copyright (C) 2011, Stefano Babic <sbabic at denx.de>
- */
-
-#include <config.h>
-#include <asm/arch/lowlevel_macro.S>
-
-.globl lowlevel_init
-lowlevel_init:
-
- core_init
-
- init_aips
-
- init_max
-
- init_m3if
-
- mov pc, lr
deleted file mode 100644
@@ -1,251 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2012, Stefano Babic <sbabic at denx.de>
- *
- * Based on flea3.c and mx35pdk.c
- */
-
-#include <common.h>
-#include <init.h>
-#include <asm/io.h>
-#include <linux/errno.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/iomux-mx35.h>
-#include <i2c.h>
-#include <power/pmic.h>
-#include <fsl_pmic.h>
-#include <mc13892.h>
-#include <mmc.h>
-#include <fsl_esdhc_imx.h>
-#include <linux/types.h>
-#include <asm/gpio.h>
-#include <asm/arch/sys_proto.h>
-#include <netdev.h>
-#include <spl.h>
-
-#define CCM_CCMR_CONFIG 0x003F4208
-
-#define ESDCTL_DDR2_CONFIG 0x007FFC3F
-
-/* For MMC */
-#define GPIO_MMC_CD 7
-#define GPIO_MMC_WP 8
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int dram_init(void)
-{
- gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1,
- PHYS_SDRAM_1_SIZE);
-
- return 0;
-}
-
-static void board_setup_sdram(void)
-{
- struct esdc_regs *esdc = (struct esdc_regs *)ESDCTL_BASE_ADDR;
-
- /* Initialize with default values both CSD0/1 */
- writel(0x2000, &esdc->esdctl0);
- writel(0x2000, &esdc->esdctl1);
-
- mx3_setup_sdram_bank(CSD0_BASE_ADDR, ESDCTL_DDR2_CONFIG,
- 13, 10, 2, 0x8080);
-}
-
-static void setup_iomux_fec(void)
-{
- static const iomux_v3_cfg_t fec_pads[] = {
- MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
- MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
- MX35_PAD_FEC_RX_DV__FEC_RX_DV,
- MX35_PAD_FEC_COL__FEC_COL,
- MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
- MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
- MX35_PAD_FEC_TX_EN__FEC_TX_EN,
- MX35_PAD_FEC_MDC__FEC_MDC,
- MX35_PAD_FEC_MDIO__FEC_MDIO,
- MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
- MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
- MX35_PAD_FEC_CRS__FEC_CRS,
- MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
- MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
- MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
- MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
- MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
- MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
- };
-
- /* setup pins for FEC */
- imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
-}
-
-int woodburn_init(void)
-{
- struct ccm_regs *ccm =
- (struct ccm_regs *)IMX_CCM_BASE;
-
- /* initialize PLL and clock configuration */
- writel(CCM_CCMR_CONFIG, &ccm->ccmr);
-
- /* Set-up RAM */
- board_setup_sdram();
-
- /* enable clocks */
- writel(readl(&ccm->cgr0) |
- MXC_CCM_CGR0_EMI_MASK |
- MXC_CCM_CGR0_EDIO_MASK |
- MXC_CCM_CGR0_EPIT1_MASK,
- &ccm->cgr0);
-
- writel(readl(&ccm->cgr1) |
- MXC_CCM_CGR1_FEC_MASK |
- MXC_CCM_CGR1_GPIO1_MASK |
- MXC_CCM_CGR1_GPIO2_MASK |
- MXC_CCM_CGR1_GPIO3_MASK |
- MXC_CCM_CGR1_I2C1_MASK |
- MXC_CCM_CGR1_I2C2_MASK |
- MXC_CCM_CGR1_I2C3_MASK,
- &ccm->cgr1);
-
- /* Set-up NAND */
- __raw_writel(readl(&ccm->rcsr) | MXC_CCM_RCSR_NFC_FMS, &ccm->rcsr);
-
- /* Set pinmux for the required peripherals */
- setup_iomux_fec();
-
- /* setup GPIO1_4 FEC_ENABLE signal */
- imx_iomux_v3_setup_pad(MX35_PAD_SCKR__GPIO1_4);
- gpio_direction_output(4, 1);
- imx_iomux_v3_setup_pad(MX35_PAD_HCKT__GPIO1_9);
- gpio_direction_output(9, 1);
-
- return 0;
-}
-
-#if defined(CONFIG_SPL_BUILD)
-void board_init_f(ulong dummy)
-{
- /* Set the stack pointer. */
- asm volatile("mov sp, %0\n" : : "r"(CONFIG_SPL_STACK));
-
- /* Initialize MUX and SDRAM */
- woodburn_init();
-
- /* Clear the BSS. */
- memset(__bss_start, 0, __bss_end - __bss_start);
-
- preloader_console_init();
- timer_init();
-
- board_init_r(NULL, 0);
-}
-
-void spl_board_init(void)
-{
-}
-
-#endif
-
-
-/* Booting from NOR in external mode */
-int board_early_init_f(void)
-{
- return woodburn_init();
-}
-
-
-int board_init(void)
-{
- struct pmic *p;
- u32 val;
- int ret;
-
- /* address of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
- ret = pmic_init(I2C_PMIC);
- if (ret)
- return ret;
-
- p = pmic_get("FSL_PMIC");
-
- /*
- * Set switchers in Auto in NORMAL mode & STANDBY mode
- * Setup the switcher mode for SW1 & SW2
- */
- pmic_reg_read(p, REG_SW_4, &val);
- val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) |
- (SWMODE_MASK << SWMODE2_SHIFT)));
- val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) |
- (SWMODE_AUTO_AUTO << SWMODE2_SHIFT);
- /* Set SWILIMB */
- val |= (1 << 22);
- pmic_reg_write(p, REG_SW_4, val);
-
- /* Setup the switcher mode for SW3 & SW4 */
- pmic_reg_read(p, REG_SW_5, &val);
- val &= ~((SWMODE_MASK << SWMODE4_SHIFT) |
- (SWMODE_MASK << SWMODE3_SHIFT));
- val |= (SWMODE_AUTO_AUTO << SWMODE4_SHIFT) |
- (SWMODE_AUTO_AUTO << SWMODE3_SHIFT);
- pmic_reg_write(p, REG_SW_5, val);
-
- /* Set VGEN1 to 3.15V */
- pmic_reg_read(p, REG_SETTING_0, &val);
- val &= ~(VGEN1_MASK);
- val |= VGEN1_3_15;
- pmic_reg_write(p, REG_SETTING_0, val);
-
- pmic_reg_read(p, REG_MODE_0, &val);
- val |= VGEN1EN;
- pmic_reg_write(p, REG_MODE_0, val);
- udelay(2000);
-
- return 0;
-}
-
-#if defined(CONFIG_FSL_ESDHC_IMX)
-struct fsl_esdhc_cfg esdhc_cfg = {MMC_SDHC1_BASE_ADDR};
-
-int board_mmc_init(bd_t *bis)
-{
- static const iomux_v3_cfg_t sdhc1_pads[] = {
- MX35_PAD_SD1_CMD__ESDHC1_CMD,
- MX35_PAD_SD1_CLK__ESDHC1_CLK,
- MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
- MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
- MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
- MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
- };
-
- /* configure pins for SDHC1 only */
- imx_iomux_v3_setup_multiple_pads(sdhc1_pads, ARRAY_SIZE(sdhc1_pads));
-
- /* MMC Card Detect on GPIO1_7 */
- imx_iomux_v3_setup_pad(MX35_PAD_SCKT__GPIO1_7);
- gpio_direction_input(GPIO_MMC_CD);
-
- /* MMC Write Protection on GPIO1_8 */
- imx_iomux_v3_setup_pad(MX35_PAD_FST__GPIO1_8);
- gpio_direction_input(GPIO_MMC_WP);
-
- esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
-
- return fsl_esdhc_initialize(bis, &esdhc_cfg);
-}
-
-int board_mmc_getcd(struct mmc *mmc)
-{
- return !gpio_get_value(GPIO_MMC_CD);
-}
-#endif
-
-u32 get_board_rev(void)
-{
- int rev = 0;
-
- return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8;
-}
deleted file mode 100644
@@ -1,51 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SYS_DCACHE_OFF=y
-CONFIG_TARGET_WOODBURN=y
-CONFIG_SYS_TEXT_BASE=0xA0000000
-CONFIG_ENV_SIZE=0x20000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_BOOTDELAY=3
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="woodburn U-Boot > "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=mxc_nand,nor0=physmap-flash.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=mxc_nand:50m(root1),32m(rootfb),64m(pcache),64m(app1),10m(app2),-(spool);physmap-flash.0:512k(u-boot),64k(env1),64k(env2),3776k(kernel1),3776k(kernel2)"
-CONFIG_EFI_PARTITION=y
-# CONFIG_PARTITION_UUIDS is not set
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_ENV_ADDR=0xA0080000
-CONFIG_ENV_ADDR_REDUND=0xA00A0000
-CONFIG_MXC_GPIO=y
-CONFIG_FSL_ESDHC_IMX=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_MXC=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_MICREL=y
-CONFIG_PHY_MICREL_KSZ8XXX=y
-CONFIG_MII=y
-CONFIG_SPI=y
-CONFIG_MXC_SPI=y
deleted file mode 100644
@@ -1,63 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SYS_DCACHE_OFF=y
-CONFIG_TARGET_WOODBURN_SD=y
-CONFIG_SYS_TEXT_BASE=0x82000000
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x20000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_SPL=y
-CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SPL_TEXT_BASE=0x10002300
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/woodburn/imximage.cfg"
-CONFIG_BOOTDELAY=3
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_SPL_BOARD_INIT=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x100
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="woodburn U-Boot > "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=mxc_nand,nor0=physmap-flash.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=mxc_nand:50m(root1),32m(rootfb),64m(pcache),64m(app1),10m(app2),-(spool);physmap-flash.0:512k(u-boot),64k(env1),64k(env2),3776k(kernel1),3776k(kernel2)"
-CONFIG_EFI_PARTITION=y
-# CONFIG_PARTITION_UUIDS is not set
-# CONFIG_SPL_PARTITION_UUIDS is not set
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_ENV_ADDR=0xA0080000
-CONFIG_ENV_ADDR_REDUND=0xA00A0000
-CONFIG_MXC_GPIO=y
-CONFIG_FSL_ESDHC_IMX=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_MXC=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_MICREL=y
-CONFIG_PHY_MICREL_KSZ8XXX=y
-CONFIG_MII=y
-CONFIG_SPI=y
-CONFIG_MXC_SPI=y
deleted file mode 100644
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2011, Stefano Babic <sbabic at denx.de>
- *
- * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
- *
- * Configuration for the woodburn board.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/arch/imx-regs.h>
-#include "woodburn_common.h"
-
-/* Set TEXT at the beginning of the NOR flash */
-
-#endif /* __CONFIG_H */
deleted file mode 100644
@@ -1,195 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2011, Stefano Babic <sbabic at denx.de>
- *
- * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
- *
- * Configuration for the woodburn board.
- */
-
-#ifndef __WOODBURN_COMMON_CONFIG_H
-#define __WOODBURN_COMMON_CONFIG_H
-
-#include <asm/arch/imx-regs.h>
-
- /* High Level Configuration Options */
-#define CONFIG_MX35
-#define CONFIG_MX35_HCLK_FREQ 24000000
-#define CONFIG_SYS_FSL_CLK
-
-#define CONFIG_MACH_TYPE MACH_TYPE_FLEA3
-
-/* This is required to setup the ESDC controller */
-
-#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
-#define CONFIG_REVISION_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
-#define CONFIG_SYS_SPD_BUS_NUM 0
-
-/* PMIC Controller */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_FSL
-#define CONFIG_POWER_FSL_MC13892
-#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8
-#define CONFIG_RTC_MC13XXX
-
-/* mmc driver */
-#define CONFIG_SYS_FSL_ESDHC_ADDR 0
-#define CONFIG_SYS_FSL_ESDHC_NUM 1
-
-/*
- * UART (console)
- */
-#define CONFIG_MXC_UART
-#define CONFIG_MXC_UART_BASE UART1_BASE
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * Command definition
- */
-
-#define CONFIG_NET_RETRY_COUNT 100
-
-
-#define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */
-
-/*
- * Ethernet on SOC (FEC)
- */
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE FEC_BASE_ADDR
-#define CONFIG_FEC_MXC_PHYADDR 0x1
-
-#define CONFIG_DISCOVER_PHY
-
-#define CONFIG_ARP_TIMEOUT 200UL
-
-/*
- * Miscellaneous configurable options
- */
-
-#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x10000
-
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-
-/*
- * Physical Memory Map
- */
-#define PHYS_SDRAM_1 CSD0_BASE_ADDR
-#define PHYS_SDRAM_1_SIZE (256 * 1024 * 1024)
-
-#define CONFIG_SYS_SDRAM_BASE CSD0_BASE_ADDR
-
-#define CONFIG_SYS_GBL_DATA_OFFSET (LOW_LEVEL_SRAM_STACK - \
- IRAM_BASE_ADDR - \
- GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR (IRAM_BASE_ADDR + \
- CONFIG_SYS_GBL_DATA_OFFSET)
-
-/*
- * MTD Command for mtdparts
- */
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_FLASH_BASE CS0_BASE_ADDR
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
-/* Monitor at beginning of flash */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
-
-/* Address and size of Redundant Environment Sector */
-
-/*
- * CFI FLASH driver setup
- */
-
-/* A non-standard buffered write algorithm */
-
-/*
- * NAND FLASH driver setup
- */
-#define CONFIG_NAND_MXC_V1_1
-#define CONFIG_MXC_NAND_REGS_BASE (NFC_BASE_ADDR)
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE (NFC_BASE_ADDR)
-#define CONFIG_MXC_NAND_HWECC
-#define CONFIG_SYS_NAND_LARGEPAGE
-
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-
-/*
- * Default environment and default scripts
- * to update uboot and load kernel
- */
-
-#define CONFIG_HOSTNAME "woodburn"
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
- "addip_sta=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
- ":${hostname}:${netdev}:off panic=1\0" \
- "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \
- "addip=if test -n ${ipdyn};then run addip_dyn;" \
- "else run addip_sta;fi\0" \
- "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
- "addtty=setenv bootargs ${bootargs}" \
- " console=ttymxc0,${baudrate}\0" \
- "addmisc=setenv bootargs ${bootargs} ${misc}\0" \
- "loadaddr=80800000\0" \
- "kernel_addr_r=80800000\0" \
- "hostname=" CONFIG_HOSTNAME "\0" \
- "bootfile=" CONFIG_HOSTNAME "/uImage\0" \
- "ramdisk_file=" CONFIG_HOSTNAME "/uRamdisk\0" \
- "flash_self=run ramargs addip addtty addmtd addmisc;" \
- "bootm ${kernel_addr} ${ramdisk_addr}\0" \
- "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \
- "bootm ${kernel_addr}\0" \
- "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
- "run nfsargs addip addtty addmtd addmisc;" \
- "bootm ${kernel_addr_r}\0" \
- "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \
- "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \
- "net_self=if run net_self_load;then " \
- "run ramargs addip addtty addmtd addmisc;" \
- "bootm ${kernel_addr_r} ${ramdisk_addr_r};" \
- "else echo Images not loades;fi\0" \
- "u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0" \
- "load=tftp ${loadaddr} ${u-boot}\0" \
- "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \
- "update=protect off ${uboot_addr} +80000;" \
- "erase ${uboot_addr} +80000;" \
- "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \
- "upd=if run load;then echo Updating u-boot;if run update;" \
- "then echo U-Boot updated;" \
- "else echo Error updating u-boot !;" \
- "echo Board without bootloader !!;" \
- "fi;" \
- "else echo U-Boot not downloaded..exiting;fi\0" \
- "bootcmd=run net_nfs\0"
-
-#endif /* __CONFIG_H */
deleted file mode 100644
@@ -1,30 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2011, Stefano Babic <sbabic at denx.de>
- *
- * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
- *
- * Configuration for the woodburn board.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/arch/imx-regs.h>
-#include "woodburn_common.h"
-
-/* Set TEXT in RAM */
-
-/*
- * SPL
- */
-
-#define CONFIG_SPL_MAX_SIZE (64 * 1024) /* 8 KB for stack */
-#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
-
-#define CONFIG_SYS_SPL_MALLOC_START 0x8f000000
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
-#define CONFIG_SPL_BSS_START_ADDR 0x8f080000 /* end of RAM */
-#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
-
-#endif /* __CONFIG_H */
Board is not longer used, remove it. Signed-off-by: Stefano Babic <sbabic at denx.de> --- arch/arm/Kconfig | 10 -- board/woodburn/Kconfig | 25 --- board/woodburn/MAINTAINERS | 12 -- board/woodburn/Makefile | 8 - board/woodburn/imximage.cfg | 4 - board/woodburn/lowlevel_init.S | 24 --- board/woodburn/woodburn.c | 251 ------------------------------ configs/woodburn_defconfig | 51 ------ configs/woodburn_sd_defconfig | 63 -------- include/configs/woodburn.h | 18 --- include/configs/woodburn_common.h | 195 ----------------------- include/configs/woodburn_sd.h | 30 ---- 12 files changed, 691 deletions(-) delete mode 100644 board/woodburn/Kconfig delete mode 100644 board/woodburn/MAINTAINERS delete mode 100644 board/woodburn/Makefile delete mode 100644 board/woodburn/imximage.cfg delete mode 100644 board/woodburn/lowlevel_init.S delete mode 100644 board/woodburn/woodburn.c delete mode 100644 configs/woodburn_defconfig delete mode 100644 configs/woodburn_sd_defconfig delete mode 100644 include/configs/woodburn.h delete mode 100644 include/configs/woodburn_common.h delete mode 100644 include/configs/woodburn_sd.h