Message ID | 20200503185227.28731-4-olteanv@gmail.com |
---|---|
State | New |
Headers | show |
Series | DM_MDIO for fsl_tsec driver | expand |
> -----Original Message----- > From: Vladimir Oltean <olteanv at gmail.com> > Sent: 2020?5?4? 2:52 > To: u-boot at lists.denx.de; joe.hershberger at ni.com; Priyanka Jain > <priyanka.jain at nxp.com> > Cc: Z.q. Hou <zhiqiang.hou at nxp.com>; bmeng.cn at gmail.com; Claudiu > Manoil <claudiu.manoil at nxp.com>; Alexandru Marginean > <alexandru.marginean at nxp.com> > Subject: [RFC PATCH 3/3] net: tsec: convert fsl_pq_mdio to DM_MDIO > > From: Vladimir Oltean <vladimir.oltean at nxp.com> > > For the platforms on which the eTSEC driver uses DM_ETH, convert its MDIO > controller code to also use DM_MDIO. > > Note that for handling the TBI PHY (the MAC PCS for SGMII), we still don't > register a udevice for it, since we can drive it locally and there is no point in > doing otherwise. > > Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com> > --- > drivers/net/fsl_mdio.c | 66 > ++++++++++++++++++++++++++++++++++++++---- > drivers/net/tsec.c | 50 ++++++++++---------------------- > include/fsl_mdio.h | 4 +-- > 3 files changed, 78 insertions(+), 42 deletions(-) > > diff --git a/drivers/net/fsl_mdio.c b/drivers/net/fsl_mdio.c index > 894b52ee66f4..284508062c8e 100644 > --- a/drivers/net/fsl_mdio.c > +++ b/drivers/net/fsl_mdio.c > @@ -8,9 +8,11 @@ > #include <common.h> > #include <miiphy.h> > #include <phy.h> > +#include <miiphy.h> > #include <fsl_mdio.h> > #include <asm/io.h> > #include <linux/errno.h> > +#include <tsec.h> > > void tsec_local_mdio_write(struct tsec_mii_mng __iomem *phyregs, int > port_addr, > int dev_addr, int regnum, int value) > @@ -56,11 +58,8 @@ int tsec_local_mdio_read(struct tsec_mii_mng > __iomem *phyregs, int port_addr, > return value; > } > > -static int fsl_pq_mdio_reset(struct mii_dev *bus) > +int fsl_pq_mdio_reset(struct tsec_mii_mng __iomem *regs) > { > - struct tsec_mii_mng __iomem *regs = > - (struct tsec_mii_mng __iomem *)bus->priv; > - > /* Reset MII (due to new addresses) */ > out_be32(®s->miimcfg, MIIMCFG_RESET_MGMT); > > @@ -72,6 +71,7 @@ static int fsl_pq_mdio_reset(struct mii_dev *bus) > return 0; > } > > +#ifndef CONFIG_DM_MDIO > int tsec_phy_read(struct mii_dev *bus, int addr, int dev_addr, int regnum) { > struct tsec_mii_mng __iomem *phyregs = @@ -91,6 +91,11 @@ int > tsec_phy_write(struct mii_dev *bus, int addr, int dev_addr, int regnum, > return 0; > } > > +static int tsec_mdio_reset(struct mii_dev *bus) { > + return fsl_pq_mdio_reset(bus->priv); > +} > + > int fsl_pq_mdio_init(bd_t *bis, struct fsl_pq_mdio_info *info) { > struct mii_dev *bus = mdio_alloc(); > @@ -102,10 +107,61 @@ int fsl_pq_mdio_init(bd_t *bis, struct > fsl_pq_mdio_info *info) > > bus->read = tsec_phy_read; > bus->write = tsec_phy_write; > - bus->reset = fsl_pq_mdio_reset; > + bus->reset = tsec_mdio_reset; > strcpy(bus->name, info->name); > > bus->priv = (void *)info->regs; > > return mdio_register(bus); > } > +#endif > + > +#ifdef CONFIG_DM_MDIO > +static int dm_fsl_pq_mdio_read(struct udevice *dev, int addr, int devad, > + int reg) > +{ > + struct fsl_pq_mdio_info *info = dev_get_priv(dev); > + > + return tsec_local_mdio_read(info->regs, addr, devad, reg); } > + > +static int dm_fsl_pq_mdio_write(struct udevice *dev, int addr, int devad, > + int reg, u16 val) > +{ > + struct fsl_pq_mdio_info *info = dev_get_priv(dev); > + > + tsec_local_mdio_write(info->regs, addr, devad, reg, val); > + > + return 0; > +} > + > +static int fsl_pq_mdio_probe(struct udevice *dev) { > + struct fsl_pq_mdio_info *info = dev_get_priv(dev); > + fdt_addr_t reg; > + > + reg = devfdt_get_addr(dev); > + info->regs = map_physmem(reg + TSEC_MDIO_REGS_OFFSET, 0, > MAP_NOCACHE); > + > + return fsl_pq_mdio_reset(info->regs); > +} > + > +static const struct mdio_ops fsl_pq_mdio_ops = { > + .read = dm_fsl_pq_mdio_read, > + .write = dm_fsl_pq_mdio_write, > +}; > + > +static const struct udevice_id fsl_pq_mdio_ids[] = { > + { .compatible = "fsl,etsec2-mdio" }, > + { } > +}; > + > +U_BOOT_DRIVER(fsl_pq_mdio) = { > + .name = "fsl_pq_mdio", > + .id = UCLASS_MDIO, > + .of_match = fsl_pq_mdio_ids, > + .probe = fsl_pq_mdio_probe, > + .ops = &fsl_pq_mdio_ops, > + .priv_auto_alloc_size = sizeof(struct fsl_pq_mdio_info), > +}; > +#endif > diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index > 842cddf2297a..93f151a8a6db 100644 > --- a/drivers/net/tsec.c > +++ b/drivers/net/tsec.c > @@ -15,6 +15,7 @@ > #include <command.h> > #include <tsec.h> > #include <fsl_mdio.h> > +#include <miiphy.h> > #include <linux/errno.h> > #include <asm/processor.h> > #include <asm/io.h> > @@ -679,8 +680,15 @@ static int init_phy(struct tsec_private *priv) > if (priv->interface == PHY_INTERFACE_MODE_SGMII) > tsec_configure_serdes(priv); > > +#ifdef CONFIG_DM_ETH > + if (ofnode_valid(ofnode_find_subnode(priv->dev->node, "fixed-link"))) > + phydev = phy_connect(NULL, 0, priv->dev, priv->interface); Thanks for adding the "fixed PHY" support, I have a non-DM_MDIO version to supporting this, while this patch is better, I will drop mine. I think it's better to split this into a separate patch, since it's a new feature for the current driver. Thanks, Zhiqiang > + else > + phydev = dm_eth_phy_connect(priv->dev); #else > phydev = phy_connect(priv->bus, priv->phyaddr, priv->dev, > priv->interface); > +#endif > if (!phydev) > return 0; > > @@ -785,14 +793,17 @@ int tsec_standard_init(bd_t *bis) > return tsec_eth_init(bis, tsec_info, ARRAY_SIZE(tsec_info)); } #else /* > CONFIG_DM_ETH */ > + > +#ifndef CONFIG_DM_MDIO > +#error "TSEC with DM_ETH also requires DM_MDIO" > +#endif > + > int tsec_probe(struct udevice *dev) > { > struct eth_pdata *pdata = dev_get_platdata(dev); > struct tsec_private *priv = dev_get_priv(dev); > - struct tsec_mii_mng __iomem *ext_phyregs_mii; > struct ofnode_phandle_args phandle_args; > u32 tbiaddr = CONFIG_SYS_TBIPA_VALUE; > - struct fsl_pq_mdio_info mdio_info; > const char *phy_mode; > fdt_addr_t reg; > ofnode parent; > @@ -801,31 +812,6 @@ int tsec_probe(struct udevice *dev) > pdata->iobase = (phys_addr_t)dev_read_addr(dev); > priv->regs = dev_remap_addr(dev); > > - if (dev_read_phandle_with_args(dev, "phy-handle", NULL, 0, 0, > - &phandle_args)) { > - printf("phy-handle does not exist under tsec %s\n", dev->name); > - return -ENOENT; > - } else { > - int reg = ofnode_read_u32_default(phandle_args.node, "reg", 0); > - > - priv->phyaddr = reg; > - } > - > - parent = ofnode_get_parent(phandle_args.node); > - if (!ofnode_valid(parent)) { > - printf("No parent node for PHY?\n"); > - return -ENOENT; > - } > - > - reg = ofnode_get_addr_index(parent, 0); > - if (reg == FDT_ADDR_T_NONE) { > - printf("No 'reg' property of MII for external PHY\n"); > - return -ENOENT; > - } > - > - ext_phyregs_mii = map_physmem(reg + TSEC_MDIO_REGS_OFFSET, 0, > - MAP_NOCACHE); > - > ret = dev_read_phandle_with_args(dev, "tbi-handle", NULL, 0, 0, > &phandle_args); > if (ret == 0) { > @@ -860,14 +846,10 @@ int tsec_probe(struct udevice *dev) > > /* Initialize flags */ > priv->flags = TSEC_GIGABIT; > - if (priv->interface == PHY_INTERFACE_MODE_SGMII) > + if (priv->interface == PHY_INTERFACE_MODE_SGMII) { > priv->flags |= TSEC_SGMII; > - > - mdio_info.regs = ext_phyregs_mii; > - mdio_info.name = (char *)dev->name; > - ret = fsl_pq_mdio_init(NULL, &mdio_info); > - if (ret) > - return ret; > + fsl_pq_mdio_reset(priv->phyregs_sgmii); > + } > > /* Reset the MAC */ > setbits_be32(&priv->regs->maccfg1, MACCFG1_SOFT_RESET); diff --git > a/include/fsl_mdio.h b/include/fsl_mdio.h index > b87346ce7ca1..11a6d588aff3 100644 > --- a/include/fsl_mdio.h > +++ b/include/fsl_mdio.h > @@ -46,9 +46,7 @@ void tsec_local_mdio_write(struct tsec_mii_mng > __iomem *phyregs, int port_addr, > int dev_addr, int reg, int value); > int tsec_local_mdio_read(struct tsec_mii_mng __iomem *phyregs, int > port_addr, > int dev_addr, int regnum); > -int tsec_phy_read(struct mii_dev *bus, int addr, int dev_addr, int regnum); > -int tsec_phy_write(struct mii_dev *bus, int addr, int dev_addr, int regnum, > - u16 value); > +int fsl_pq_mdio_reset(struct tsec_mii_mng __iomem *regs); > int memac_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr, > int regnum, u16 value); > int memac_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr, > -- > 2.17.1
On Mon, 4 May 2020 at 09:22, Z.q. Hou <zhiqiang.hou at nxp.com> wrote: > > > > > -----Original Message----- > > From: Vladimir Oltean <olteanv at gmail.com> > > Sent: 2020?5?4? 2:52 > > To: u-boot at lists.denx.de; joe.hershberger at ni.com; Priyanka Jain > > <priyanka.jain at nxp.com> > > Cc: Z.q. Hou <zhiqiang.hou at nxp.com>; bmeng.cn at gmail.com; Claudiu > > Manoil <claudiu.manoil at nxp.com>; Alexandru Marginean > > <alexandru.marginean at nxp.com> > > Subject: [RFC PATCH 3/3] net: tsec: convert fsl_pq_mdio to DM_MDIO > > > > From: Vladimir Oltean <vladimir.oltean at nxp.com> > > > > For the platforms on which the eTSEC driver uses DM_ETH, convert its MDIO > > controller code to also use DM_MDIO. > > > > Note that for handling the TBI PHY (the MAC PCS for SGMII), we still don't > > register a udevice for it, since we can drive it locally and there is no point in > > doing otherwise. > > > > Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com> > > --- > > drivers/net/fsl_mdio.c | 66 > > ++++++++++++++++++++++++++++++++++++++---- > > drivers/net/tsec.c | 50 ++++++++++---------------------- > > include/fsl_mdio.h | 4 +-- > > 3 files changed, 78 insertions(+), 42 deletions(-) > > > > diff --git a/drivers/net/fsl_mdio.c b/drivers/net/fsl_mdio.c index > > 894b52ee66f4..284508062c8e 100644 > > --- a/drivers/net/fsl_mdio.c > > +++ b/drivers/net/fsl_mdio.c > > @@ -8,9 +8,11 @@ > > #include <common.h> > > #include <miiphy.h> > > #include <phy.h> > > +#include <miiphy.h> > > #include <fsl_mdio.h> > > #include <asm/io.h> > > #include <linux/errno.h> > > +#include <tsec.h> > > > > void tsec_local_mdio_write(struct tsec_mii_mng __iomem *phyregs, int > > port_addr, > > int dev_addr, int regnum, int value) > > @@ -56,11 +58,8 @@ int tsec_local_mdio_read(struct tsec_mii_mng > > __iomem *phyregs, int port_addr, > > return value; > > } > > > > -static int fsl_pq_mdio_reset(struct mii_dev *bus) > > +int fsl_pq_mdio_reset(struct tsec_mii_mng __iomem *regs) > > { > > - struct tsec_mii_mng __iomem *regs = > > - (struct tsec_mii_mng __iomem *)bus->priv; > > - > > /* Reset MII (due to new addresses) */ > > out_be32(®s->miimcfg, MIIMCFG_RESET_MGMT); > > > > @@ -72,6 +71,7 @@ static int fsl_pq_mdio_reset(struct mii_dev *bus) > > return 0; > > } > > > > +#ifndef CONFIG_DM_MDIO > > int tsec_phy_read(struct mii_dev *bus, int addr, int dev_addr, int regnum) { > > struct tsec_mii_mng __iomem *phyregs = @@ -91,6 +91,11 @@ int > > tsec_phy_write(struct mii_dev *bus, int addr, int dev_addr, int regnum, > > return 0; > > } > > > > +static int tsec_mdio_reset(struct mii_dev *bus) { > > + return fsl_pq_mdio_reset(bus->priv); > > +} > > + > > int fsl_pq_mdio_init(bd_t *bis, struct fsl_pq_mdio_info *info) { > > struct mii_dev *bus = mdio_alloc(); > > @@ -102,10 +107,61 @@ int fsl_pq_mdio_init(bd_t *bis, struct > > fsl_pq_mdio_info *info) > > > > bus->read = tsec_phy_read; > > bus->write = tsec_phy_write; > > - bus->reset = fsl_pq_mdio_reset; > > + bus->reset = tsec_mdio_reset; > > strcpy(bus->name, info->name); > > > > bus->priv = (void *)info->regs; > > > > return mdio_register(bus); > > } > > +#endif > > + > > +#ifdef CONFIG_DM_MDIO > > +static int dm_fsl_pq_mdio_read(struct udevice *dev, int addr, int devad, > > + int reg) > > +{ > > + struct fsl_pq_mdio_info *info = dev_get_priv(dev); > > + > > + return tsec_local_mdio_read(info->regs, addr, devad, reg); } > > + > > +static int dm_fsl_pq_mdio_write(struct udevice *dev, int addr, int devad, > > + int reg, u16 val) > > +{ > > + struct fsl_pq_mdio_info *info = dev_get_priv(dev); > > + > > + tsec_local_mdio_write(info->regs, addr, devad, reg, val); > > + > > + return 0; > > +} > > + > > +static int fsl_pq_mdio_probe(struct udevice *dev) { > > + struct fsl_pq_mdio_info *info = dev_get_priv(dev); > > + fdt_addr_t reg; > > + > > + reg = devfdt_get_addr(dev); > > + info->regs = map_physmem(reg + TSEC_MDIO_REGS_OFFSET, 0, > > MAP_NOCACHE); > > + > > + return fsl_pq_mdio_reset(info->regs); > > +} > > + > > +static const struct mdio_ops fsl_pq_mdio_ops = { > > + .read = dm_fsl_pq_mdio_read, > > + .write = dm_fsl_pq_mdio_write, > > +}; > > + > > +static const struct udevice_id fsl_pq_mdio_ids[] = { > > + { .compatible = "fsl,etsec2-mdio" }, > > + { } > > +}; > > + > > +U_BOOT_DRIVER(fsl_pq_mdio) = { > > + .name = "fsl_pq_mdio", > > + .id = UCLASS_MDIO, > > + .of_match = fsl_pq_mdio_ids, > > + .probe = fsl_pq_mdio_probe, > > + .ops = &fsl_pq_mdio_ops, > > + .priv_auto_alloc_size = sizeof(struct fsl_pq_mdio_info), > > +}; > > +#endif > > diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index > > 842cddf2297a..93f151a8a6db 100644 > > --- a/drivers/net/tsec.c > > +++ b/drivers/net/tsec.c > > @@ -15,6 +15,7 @@ > > #include <command.h> > > #include <tsec.h> > > #include <fsl_mdio.h> > > +#include <miiphy.h> > > #include <linux/errno.h> > > #include <asm/processor.h> > > #include <asm/io.h> > > @@ -679,8 +680,15 @@ static int init_phy(struct tsec_private *priv) > > if (priv->interface == PHY_INTERFACE_MODE_SGMII) > > tsec_configure_serdes(priv); > > > > +#ifdef CONFIG_DM_ETH > > + if (ofnode_valid(ofnode_find_subnode(priv->dev->node, "fixed-link"))) > > + phydev = phy_connect(NULL, 0, priv->dev, priv->interface); > > Thanks for adding the "fixed PHY" support, I have a non-DM_MDIO version > to supporting this, while this patch is better, I will drop mine. > I think it's better to split this into a separate patch, since it's a new feature > for the current driver. > > Thanks, > Zhiqiang > Thanks for the review. I'll split it apart when submitting it (after your patches get merged). > > + else > > + phydev = dm_eth_phy_connect(priv->dev); #else > > phydev = phy_connect(priv->bus, priv->phyaddr, priv->dev, > > priv->interface); > > +#endif > > if (!phydev) > > return 0; > > > > @@ -785,14 +793,17 @@ int tsec_standard_init(bd_t *bis) > > return tsec_eth_init(bis, tsec_info, ARRAY_SIZE(tsec_info)); } #else /* > > CONFIG_DM_ETH */ > > + > > +#ifndef CONFIG_DM_MDIO > > +#error "TSEC with DM_ETH also requires DM_MDIO" > > +#endif > > + > > int tsec_probe(struct udevice *dev) > > { > > struct eth_pdata *pdata = dev_get_platdata(dev); > > struct tsec_private *priv = dev_get_priv(dev); > > - struct tsec_mii_mng __iomem *ext_phyregs_mii; > > struct ofnode_phandle_args phandle_args; > > u32 tbiaddr = CONFIG_SYS_TBIPA_VALUE; > > - struct fsl_pq_mdio_info mdio_info; > > const char *phy_mode; > > fdt_addr_t reg; > > ofnode parent; > > @@ -801,31 +812,6 @@ int tsec_probe(struct udevice *dev) > > pdata->iobase = (phys_addr_t)dev_read_addr(dev); > > priv->regs = dev_remap_addr(dev); > > > > - if (dev_read_phandle_with_args(dev, "phy-handle", NULL, 0, 0, > > - &phandle_args)) { > > - printf("phy-handle does not exist under tsec %s\n", dev->name); > > - return -ENOENT; > > - } else { > > - int reg = ofnode_read_u32_default(phandle_args.node, "reg", 0); > > - > > - priv->phyaddr = reg; > > - } > > - > > - parent = ofnode_get_parent(phandle_args.node); > > - if (!ofnode_valid(parent)) { > > - printf("No parent node for PHY?\n"); > > - return -ENOENT; > > - } > > - > > - reg = ofnode_get_addr_index(parent, 0); > > - if (reg == FDT_ADDR_T_NONE) { > > - printf("No 'reg' property of MII for external PHY\n"); > > - return -ENOENT; > > - } > > - > > - ext_phyregs_mii = map_physmem(reg + TSEC_MDIO_REGS_OFFSET, 0, > > - MAP_NOCACHE); > > - > > ret = dev_read_phandle_with_args(dev, "tbi-handle", NULL, 0, 0, > > &phandle_args); > > if (ret == 0) { > > @@ -860,14 +846,10 @@ int tsec_probe(struct udevice *dev) > > > > /* Initialize flags */ > > priv->flags = TSEC_GIGABIT; > > - if (priv->interface == PHY_INTERFACE_MODE_SGMII) > > + if (priv->interface == PHY_INTERFACE_MODE_SGMII) { > > priv->flags |= TSEC_SGMII; > > - > > - mdio_info.regs = ext_phyregs_mii; > > - mdio_info.name = (char *)dev->name; > > - ret = fsl_pq_mdio_init(NULL, &mdio_info); > > - if (ret) > > - return ret; > > + fsl_pq_mdio_reset(priv->phyregs_sgmii); > > + } > > > > /* Reset the MAC */ > > setbits_be32(&priv->regs->maccfg1, MACCFG1_SOFT_RESET); diff --git > > a/include/fsl_mdio.h b/include/fsl_mdio.h index > > b87346ce7ca1..11a6d588aff3 100644 > > --- a/include/fsl_mdio.h > > +++ b/include/fsl_mdio.h > > @@ -46,9 +46,7 @@ void tsec_local_mdio_write(struct tsec_mii_mng > > __iomem *phyregs, int port_addr, > > int dev_addr, int reg, int value); > > int tsec_local_mdio_read(struct tsec_mii_mng __iomem *phyregs, int > > port_addr, > > int dev_addr, int regnum); > > -int tsec_phy_read(struct mii_dev *bus, int addr, int dev_addr, int regnum); > > -int tsec_phy_write(struct mii_dev *bus, int addr, int dev_addr, int regnum, > > - u16 value); > > +int fsl_pq_mdio_reset(struct tsec_mii_mng __iomem *regs); > > int memac_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr, > > int regnum, u16 value); > > int memac_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr, > > -- > > 2.17.1 > Regards, -Vladimir
Hi Vladimir, a patch for tsec migration to DM_MDIO has already been submitted, part of the DPAA 1 PowerPC patch set: https://patchwork.ozlabs.org/project/uboot/patch/1588251616-14976-3-git-send-email-madalin.bucur at oss.nxp.com/ Madalin > -----Original Message----- > From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of Vladimir Oltean > Sent: Sunday, May 3, 2020 9:52 PM > To: u-boot at lists.denx.de; joe.hershberger at ni.com; Priyanka Jain > <priyanka.jain at nxp.com> > Cc: Z.q. Hou <zhiqiang.hou at nxp.com>; bmeng.cn at gmail.com; Claudiu Manoil > <claudiu.manoil at nxp.com>; Alexandru Marginean > <alexandru.marginean at nxp.com> > Subject: [RFC PATCH 3/3] net: tsec: convert fsl_pq_mdio to DM_MDIO > > From: Vladimir Oltean <vladimir.oltean at nxp.com> > > For the platforms on which the eTSEC driver uses DM_ETH, convert its > MDIO controller code to also use DM_MDIO. > > Note that for handling the TBI PHY (the MAC PCS for SGMII), we still > don't register a udevice for it, since we can drive it locally and there > is no point in doing otherwise. > > Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
diff --git a/drivers/net/fsl_mdio.c b/drivers/net/fsl_mdio.c index 894b52ee66f4..284508062c8e 100644 --- a/drivers/net/fsl_mdio.c +++ b/drivers/net/fsl_mdio.c @@ -8,9 +8,11 @@ #include <common.h> #include <miiphy.h> #include <phy.h> +#include <miiphy.h> #include <fsl_mdio.h> #include <asm/io.h> #include <linux/errno.h> +#include <tsec.h> void tsec_local_mdio_write(struct tsec_mii_mng __iomem *phyregs, int port_addr, int dev_addr, int regnum, int value) @@ -56,11 +58,8 @@ int tsec_local_mdio_read(struct tsec_mii_mng __iomem *phyregs, int port_addr, return value; } -static int fsl_pq_mdio_reset(struct mii_dev *bus) +int fsl_pq_mdio_reset(struct tsec_mii_mng __iomem *regs) { - struct tsec_mii_mng __iomem *regs = - (struct tsec_mii_mng __iomem *)bus->priv; - /* Reset MII (due to new addresses) */ out_be32(®s->miimcfg, MIIMCFG_RESET_MGMT); @@ -72,6 +71,7 @@ static int fsl_pq_mdio_reset(struct mii_dev *bus) return 0; } +#ifndef CONFIG_DM_MDIO int tsec_phy_read(struct mii_dev *bus, int addr, int dev_addr, int regnum) { struct tsec_mii_mng __iomem *phyregs = @@ -91,6 +91,11 @@ int tsec_phy_write(struct mii_dev *bus, int addr, int dev_addr, int regnum, return 0; } +static int tsec_mdio_reset(struct mii_dev *bus) +{ + return fsl_pq_mdio_reset(bus->priv); +} + int fsl_pq_mdio_init(bd_t *bis, struct fsl_pq_mdio_info *info) { struct mii_dev *bus = mdio_alloc(); @@ -102,10 +107,61 @@ int fsl_pq_mdio_init(bd_t *bis, struct fsl_pq_mdio_info *info) bus->read = tsec_phy_read; bus->write = tsec_phy_write; - bus->reset = fsl_pq_mdio_reset; + bus->reset = tsec_mdio_reset; strcpy(bus->name, info->name); bus->priv = (void *)info->regs; return mdio_register(bus); } +#endif + +#ifdef CONFIG_DM_MDIO +static int dm_fsl_pq_mdio_read(struct udevice *dev, int addr, int devad, + int reg) +{ + struct fsl_pq_mdio_info *info = dev_get_priv(dev); + + return tsec_local_mdio_read(info->regs, addr, devad, reg); +} + +static int dm_fsl_pq_mdio_write(struct udevice *dev, int addr, int devad, + int reg, u16 val) +{ + struct fsl_pq_mdio_info *info = dev_get_priv(dev); + + tsec_local_mdio_write(info->regs, addr, devad, reg, val); + + return 0; +} + +static int fsl_pq_mdio_probe(struct udevice *dev) +{ + struct fsl_pq_mdio_info *info = dev_get_priv(dev); + fdt_addr_t reg; + + reg = devfdt_get_addr(dev); + info->regs = map_physmem(reg + TSEC_MDIO_REGS_OFFSET, 0, MAP_NOCACHE); + + return fsl_pq_mdio_reset(info->regs); +} + +static const struct mdio_ops fsl_pq_mdio_ops = { + .read = dm_fsl_pq_mdio_read, + .write = dm_fsl_pq_mdio_write, +}; + +static const struct udevice_id fsl_pq_mdio_ids[] = { + { .compatible = "fsl,etsec2-mdio" }, + { } +}; + +U_BOOT_DRIVER(fsl_pq_mdio) = { + .name = "fsl_pq_mdio", + .id = UCLASS_MDIO, + .of_match = fsl_pq_mdio_ids, + .probe = fsl_pq_mdio_probe, + .ops = &fsl_pq_mdio_ops, + .priv_auto_alloc_size = sizeof(struct fsl_pq_mdio_info), +}; +#endif diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index 842cddf2297a..93f151a8a6db 100644 --- a/drivers/net/tsec.c +++ b/drivers/net/tsec.c @@ -15,6 +15,7 @@ #include <command.h> #include <tsec.h> #include <fsl_mdio.h> +#include <miiphy.h> #include <linux/errno.h> #include <asm/processor.h> #include <asm/io.h> @@ -679,8 +680,15 @@ static int init_phy(struct tsec_private *priv) if (priv->interface == PHY_INTERFACE_MODE_SGMII) tsec_configure_serdes(priv); +#ifdef CONFIG_DM_ETH + if (ofnode_valid(ofnode_find_subnode(priv->dev->node, "fixed-link"))) + phydev = phy_connect(NULL, 0, priv->dev, priv->interface); + else + phydev = dm_eth_phy_connect(priv->dev); +#else phydev = phy_connect(priv->bus, priv->phyaddr, priv->dev, priv->interface); +#endif if (!phydev) return 0; @@ -785,14 +793,17 @@ int tsec_standard_init(bd_t *bis) return tsec_eth_init(bis, tsec_info, ARRAY_SIZE(tsec_info)); } #else /* CONFIG_DM_ETH */ + +#ifndef CONFIG_DM_MDIO +#error "TSEC with DM_ETH also requires DM_MDIO" +#endif + int tsec_probe(struct udevice *dev) { struct eth_pdata *pdata = dev_get_platdata(dev); struct tsec_private *priv = dev_get_priv(dev); - struct tsec_mii_mng __iomem *ext_phyregs_mii; struct ofnode_phandle_args phandle_args; u32 tbiaddr = CONFIG_SYS_TBIPA_VALUE; - struct fsl_pq_mdio_info mdio_info; const char *phy_mode; fdt_addr_t reg; ofnode parent; @@ -801,31 +812,6 @@ int tsec_probe(struct udevice *dev) pdata->iobase = (phys_addr_t)dev_read_addr(dev); priv->regs = dev_remap_addr(dev); - if (dev_read_phandle_with_args(dev, "phy-handle", NULL, 0, 0, - &phandle_args)) { - printf("phy-handle does not exist under tsec %s\n", dev->name); - return -ENOENT; - } else { - int reg = ofnode_read_u32_default(phandle_args.node, "reg", 0); - - priv->phyaddr = reg; - } - - parent = ofnode_get_parent(phandle_args.node); - if (!ofnode_valid(parent)) { - printf("No parent node for PHY?\n"); - return -ENOENT; - } - - reg = ofnode_get_addr_index(parent, 0); - if (reg == FDT_ADDR_T_NONE) { - printf("No 'reg' property of MII for external PHY\n"); - return -ENOENT; - } - - ext_phyregs_mii = map_physmem(reg + TSEC_MDIO_REGS_OFFSET, 0, - MAP_NOCACHE); - ret = dev_read_phandle_with_args(dev, "tbi-handle", NULL, 0, 0, &phandle_args); if (ret == 0) { @@ -860,14 +846,10 @@ int tsec_probe(struct udevice *dev) /* Initialize flags */ priv->flags = TSEC_GIGABIT; - if (priv->interface == PHY_INTERFACE_MODE_SGMII) + if (priv->interface == PHY_INTERFACE_MODE_SGMII) { priv->flags |= TSEC_SGMII; - - mdio_info.regs = ext_phyregs_mii; - mdio_info.name = (char *)dev->name; - ret = fsl_pq_mdio_init(NULL, &mdio_info); - if (ret) - return ret; + fsl_pq_mdio_reset(priv->phyregs_sgmii); + } /* Reset the MAC */ setbits_be32(&priv->regs->maccfg1, MACCFG1_SOFT_RESET); diff --git a/include/fsl_mdio.h b/include/fsl_mdio.h index b87346ce7ca1..11a6d588aff3 100644 --- a/include/fsl_mdio.h +++ b/include/fsl_mdio.h @@ -46,9 +46,7 @@ void tsec_local_mdio_write(struct tsec_mii_mng __iomem *phyregs, int port_addr, int dev_addr, int reg, int value); int tsec_local_mdio_read(struct tsec_mii_mng __iomem *phyregs, int port_addr, int dev_addr, int regnum); -int tsec_phy_read(struct mii_dev *bus, int addr, int dev_addr, int regnum); -int tsec_phy_write(struct mii_dev *bus, int addr, int dev_addr, int regnum, - u16 value); +int fsl_pq_mdio_reset(struct tsec_mii_mng __iomem *regs); int memac_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr, int regnum, u16 value); int memac_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr,