@@ -1,5 +1,5 @@
# SPDX-License-Identifier: BSD-3-Clause
-# Copyright 2017 NXP
+# Copyright 2017-2019 NXP
#
include $(RTE_SDK)/mk/rte.vars.mk
@@ -15,6 +15,7 @@ CFLAGS += -O3 $(WERROR_FLAGS)
CFLAGS += -Wno-pointer-arith
CFLAGS += -I$(RTE_SDK_DPAA)/
CFLAGS += -I$(RTE_SDK_DPAA)/include
+CFLAGS += -I$(RTE_SDK_DPAA)/fmlib
CFLAGS += -I$(RTE_SDK)/drivers/bus/dpaa
CFLAGS += -I$(RTE_SDK)/drivers/bus/dpaa/include/
CFLAGS += -I$(RTE_SDK)/drivers/bus/dpaa/base/qbman
@@ -26,6 +27,7 @@ CFLAGS += -I$(RTE_SDK)/lib/librte_eal/include
EXPORT_MAP := rte_pmd_dpaa_version.map
# Interfaces with DPDK
+SRCS-$(CONFIG_RTE_LIBRTE_DPAA_PMD) += fmlib/fm_lib.c
SRCS-$(CONFIG_RTE_LIBRTE_DPAA_PMD) += dpaa_ethdev.c
SRCS-$(CONFIG_RTE_LIBRTE_DPAA_PMD) += dpaa_rxtx.c
new file mode 100644
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: (BSD-3-Clause OR GPL-2.0)
+ * Copyright 2009-2012 Freescale Semiconductor Inc.
+ * Copyright 2017-2020 NXP
+ */
+
+#ifndef __DPAA_INTEGRATION_H
+#define __DPAA_INTEGRATION_H
+
+#include "ncsw_ext.h"
+
+#define DPAA_VERSION 11
+
+#define BM_MAX_NUM_OF_POOLS 64 /**< Number of buffers pools */
+
+#define INTG_MAX_NUM_OF_FM 2
+
+/* Ports defines */
+#define FM_MAX_NUM_OF_1G_MACS 6
+#define FM_MAX_NUM_OF_10G_MACS 2
+#define FM_MAX_NUM_OF_MACS (FM_MAX_NUM_OF_1G_MACS + FM_MAX_NUM_OF_10G_MACS)
+#define FM_MAX_NUM_OF_OH_PORTS 6
+
+#define FM_MAX_NUM_OF_1G_RX_PORTS FM_MAX_NUM_OF_1G_MACS
+#define FM_MAX_NUM_OF_10G_RX_PORTS FM_MAX_NUM_OF_10G_MACS
+#define FM_MAX_NUM_OF_RX_PORTS \
+ (FM_MAX_NUM_OF_10G_RX_PORTS + FM_MAX_NUM_OF_1G_RX_PORTS)
+
+#define FM_MAX_NUM_OF_1G_TX_PORTS FM_MAX_NUM_OF_1G_MACS
+#define FM_MAX_NUM_OF_10G_TX_PORTS FM_MAX_NUM_OF_10G_MACS
+#define FM_MAX_NUM_OF_TX_PORTS \
+ (FM_MAX_NUM_OF_10G_TX_PORTS + FM_MAX_NUM_OF_1G_TX_PORTS)
+
+#define FM_PORT_MAX_NUM_OF_EXT_POOLS 4
+ /**< Number of external BM pools per Rx port */
+#define FM_PORT_NUM_OF_CONGESTION_GRPS 256
+ /**< Total number of congestion groups in QM */
+#define FM_MAX_NUM_OF_SUB_PORTALS 16
+#define FM_PORT_MAX_NUM_OF_OBSERVED_EXT_POOLS 0
+
+/* PCD defines */
+#define FM_PCD_PLCR_NUM_ENTRIES 256
+ /**< Total number of policer profiles */
+#define FM_PCD_KG_NUM_OF_SCHEMES 32
+ /**< Total number of KG schemes */
+#define FM_PCD_MAX_NUM_OF_CLS_PLANS 256
+ /**< Number of classification plan entries. */
+
+#define FM_MAX_NUM_OF_PFC_PRIORITIES 8
+
+#endif /* __DPAA_INTEGRATION_H */
new file mode 100644
@@ -0,0 +1,968 @@
+/* SPDX-License-Identifier: (BSD-3-Clause OR GPL-2.0)
+ * Copyright 2008-2012 Freescale Semiconductor Inc.
+ * Copyright 2017-2020 NXP
+ */
+
+#ifndef __FM_EXT_H
+#define __FM_EXT_H
+
+#include "ncsw_ext.h"
+#include "dpaa_integration.h"
+
+#define FM_IOC_TYPE_BASE (NCSW_IOC_TYPE_BASE + 1)
+#define FMT_IOC_TYPE_BASE (NCSW_IOC_TYPE_BASE + 3)
+
+#define MODULE_FM 0x00010000
+#define __ERR_MODULE__ MODULE_FM
+
+/* #define FM_LIB_DBG */
+
+#if defined(FM_LIB_DBG)
+ #define _fml_dbg(format, arg...) \
+ printf("fmlib [%s:%u] - " format, \
+ __func__, __LINE__, ##arg)
+#else
+ #define _fml_dbg(arg...)
+#endif
+
+/*#define FM_IOCTL_DBG*/
+
+#if defined(FM_IOCTL_DBG)
+ #define _fm_ioctl_dbg(format, arg...) \
+ printf("fm ioctl [%s:%u] - " format, \
+ __func__, __LINE__, ##arg)
+#else
+ #define _fm_ioctl_dbg(arg...)
+#endif
+
+/**
+ @Group lnx_ioctl_ncsw_grp NetCommSw Linux User-Space (IOCTL) API
+ @{
+*/
+
+#define NCSW_IOC_TYPE_BASE 0xe0
+ /**< defines the IOCTL type for all the NCSW Linux module commands */
+
+/**
+ @Group lnx_usr_FM_grp Frame Manager API
+
+ @Description FM API functions, definitions and enums.
+
+ @{
+*/
+
+/**
+ @Group lnx_usr_FM_lib_grp FM library
+
+ @Description FM API functions, definitions and enums
+
+ The FM module is the main driver module and is a mandatory module
+ for FM driver users. This module must be initialized first prior
+ to any other drivers modules.
+ The FM is a "singleton" module. It is responsible of the common
+ HW modules: FPM, DMA, common QMI and common BMI initializations and
+ run-time control routines. This module must be initialized always
+ when working with any of the FM modules.
+ NOTE - We assume that the FM library will be initialized only by core No. 0!
+
+ @{
+*/
+
+/**
+ @Description Enum for defining port types
+*/
+typedef enum e_FmPortType {
+ e_FM_PORT_TYPE_OH_OFFLINE_PARSING = 0, /**< Offline parsing port */
+ e_FM_PORT_TYPE_RX, /**< 1G Rx port */
+ e_FM_PORT_TYPE_RX_10G, /**< 10G Rx port */
+ e_FM_PORT_TYPE_TX, /**< 1G Tx port */
+ e_FM_PORT_TYPE_TX_10G, /**< 10G Tx port */
+ e_FM_PORT_TYPE_RX_2_5G, /**< 2.5G Rx port */
+ e_FM_PORT_TYPE_TX_2_5G, /**< 2.5G Tx port */
+ e_FM_PORT_TYPE_DUMMY
+} e_FmPortType;
+
+/**
+ @Description Parse results memory layout
+*/
+typedef struct t_FmPrsResult {
+ volatile uint8_t lpid; /**< Logical port id */
+ volatile uint8_t shimr; /**< Shim header result */
+ volatile uint16_t l2r; /**< Layer 2 result */
+ volatile uint16_t l3r; /**< Layer 3 result */
+ volatile uint8_t l4r; /**< Layer 4 result */
+ volatile uint8_t cplan; /**< Classification plan id */
+ volatile uint16_t nxthdr; /**< Next Header */
+ volatile uint16_t cksum; /**< Running-sum */
+ volatile uint16_t flags_frag_off;
+ /**< Flags & fragment-offset field of the last IP-header */
+ volatile uint8_t route_type;
+ /**< Routing type field of a IPv6 routing extension header */
+ volatile uint8_t rhp_ip_valid;
+ /**< Routing Extension Header Present; last bit is IP valid */
+ volatile uint8_t shim_off[2]; /**< Shim offset */
+ volatile uint8_t ip_pid_off; /**< IP PID (last IP-proto) offset */
+ volatile uint8_t eth_off; /**< ETH offset */
+ volatile uint8_t llc_snap_off; /**< LLC_SNAP offset */
+ volatile uint8_t vlan_off[2]; /**< VLAN offset */
+ volatile uint8_t etype_off; /**< ETYPE offset */
+ volatile uint8_t pppoe_off; /**< PPP offset */
+ volatile uint8_t mpls_off[2]; /**< MPLS offset */
+ volatile uint8_t ip_off[2]; /**< IP offset */
+ volatile uint8_t gre_off; /**< GRE offset */
+ volatile uint8_t l4_off; /**< Layer 4 offset */
+ volatile uint8_t nxthdr_off; /**< Parser end point */
+} __rte_packed t_FmPrsResult;
+
+/**
+ @Collection FM Parser results
+*/
+#define FM_PR_L2_VLAN_STACK 0x00000100 /**< Parse Result: VLAN stack */
+#define FM_PR_L2_ETHERNET 0x00008000 /**< Parse Result: Ethernet*/
+#define FM_PR_L2_VLAN 0x00004000 /**< Parse Result: VLAN */
+#define FM_PR_L2_LLC_SNAP 0x00002000 /**< Parse Result: LLC_SNAP */
+#define FM_PR_L2_MPLS 0x00001000 /**< Parse Result: MPLS */
+#define FM_PR_L2_PPPoE 0x00000800 /**< Parse Result: PPPoE */
+/* @} */
+
+/**
+ @Collection FM Frame descriptor macros
+*/
+#define FM_FD_CMD_FCO 0x80000000 /**< Frame queue Context Override */
+#define FM_FD_CMD_RPD 0x40000000 /**< Read Prepended Data */
+#define FM_FD_CMD_UPD 0x20000000 /**< Update Prepended Data */
+#define FM_FD_CMD_DTC 0x10000000 /**< Do L4 Checksum */
+#define FM_FD_CMD_DCL4C 0x10000000 /**< Didn't calculate L4 Checksum */
+#define FM_FD_CMD_CFQ 0x00ffffff /**< Confirmation Frame Queue */
+
+#define FM_FD_ERR_UNSUPPORTED_FORMAT 0x04000000
+ /**< Not for Rx-Port! Unsupported Format */
+#define FM_FD_ERR_LENGTH 0x02000000 /**< Not for Rx-Port! Length Error */
+#define FM_FD_ERR_DMA 0x01000000 /**< DMA Data error */
+
+#define FM_FD_IPR 0x00000001 /**< IPR frame (not error) */
+
+#define FM_FD_ERR_IPR_NCSP (0x00100000 | FM_FD_IPR)
+ /**< IPR non-consistent-sp */
+#define FM_FD_ERR_IPR (0x00200000 | FM_FD_IPR) /**< IPR error */
+#define FM_FD_ERR_IPR_TO (0x00300000 | FM_FD_IPR) /**< IPR timeout */
+
+#ifdef FM_CAPWAP_SUPPORT
+#define FM_FD_ERR_CRE 0x00200000
+#define FM_FD_ERR_CHE 0x00100000
+#endif /* FM_CAPWAP_SUPPORT */
+
+#define FM_FD_ERR_PHYSICAL 0x00080000
+ /**< Rx FIFO overflow, FCS error, code error, running disparity
+ error (SGMII and TBI modes), FIFO parity error. PHY
+ Sequence error, PHY error control character detected. */
+#define FM_FD_ERR_SIZE 0x00040000
+ /**< Frame too long OR Frame size exceeds max_length_frame */
+#define FM_FD_ERR_CLS_DISCARD 0x00020000 /**< classification discard */
+#define FM_FD_ERR_EXTRACTION 0x00008000 /**< Extract Out of Frame */
+#define FM_FD_ERR_NO_SCHEME 0x00004000 /**< No Scheme Selected */
+#define FM_FD_ERR_KEYSIZE_OVERFLOW 0x00002000 /**< Keysize Overflow */
+#define FM_FD_ERR_COLOR_RED 0x00000800 /**< Frame color is red */
+#define FM_FD_ERR_COLOR_YELLOW 0x00000400 /**< Frame color is yellow */
+#define FM_FD_ERR_ILL_PLCR 0x00000200 /**< Illegal Policer Profile selected */
+#define FM_FD_ERR_PLCR_FRAME_LEN 0x00000100 /**< Policer frame length error */
+#define FM_FD_ERR_PRS_TIMEOUT 0x00000080 /**< Parser Time out Exceed */
+#define FM_FD_ERR_PRS_ILL_INSTRUCT 0x00000040 /**< Invalid Soft Parser instruction */
+#define FM_FD_ERR_PRS_HDR_ERR 0x00000020
+ /**< Header error was identified during parsing */
+#define FM_FD_ERR_BLOCK_LIMIT_EXCEEDED 0x00000008
+ /**< Frame parsed beyind 256 first bytes */
+
+#define FM_FD_TX_STATUS_ERR_MASK (FM_FD_ERR_UNSUPPORTED_FORMAT | \
+ FM_FD_ERR_LENGTH | \
+ FM_FD_ERR_DMA) /**< TX Error FD bits */
+
+#define FM_FD_RX_STATUS_ERR_MASK (FM_FD_ERR_UNSUPPORTED_FORMAT | \
+ FM_FD_ERR_LENGTH | \
+ FM_FD_ERR_DMA | \
+ FM_FD_ERR_IPR | \
+ FM_FD_ERR_IPR_TO | \
+ FM_FD_ERR_IPR_NCSP | \
+ FM_FD_ERR_PHYSICAL | \
+ FM_FD_ERR_SIZE | \
+ FM_FD_ERR_CLS_DISCARD | \
+ FM_FD_ERR_COLOR_RED | \
+ FM_FD_ERR_COLOR_YELLOW | \
+ FM_FD_ERR_ILL_PLCR | \
+ FM_FD_ERR_PLCR_FRAME_LEN | \
+ FM_FD_ERR_EXTRACTION | \
+ FM_FD_ERR_NO_SCHEME | \
+ FM_FD_ERR_KEYSIZE_OVERFLOW | \
+ FM_FD_ERR_PRS_TIMEOUT | \
+ FM_FD_ERR_PRS_ILL_INSTRUCT | \
+ FM_FD_ERR_PRS_HDR_ERR | \
+ FM_FD_ERR_BLOCK_LIMIT_EXCEEDED)
+ /**< RX Error FD bits */
+
+#define FM_FD_RX_STATUS_ERR_NON_FM 0x00400000 /**< non Frame-Manager error */
+/* @} */
+
+/**
+ @Description FM Exceptions
+*/
+typedef enum e_FmExceptions {
+ e_FM_EX_DMA_BUS_ERROR = 0, /**< DMA bus error. */
+ e_FM_EX_DMA_READ_ECC,
+ /**< Read Buffer ECC error (Valid for FM rev < 6)*/
+ e_FM_EX_DMA_SYSTEM_WRITE_ECC,
+ /**< Write Buffer ECC error on system side (Valid for FM rev < 6)*/
+ e_FM_EX_DMA_FM_WRITE_ECC,
+ /**< Write Buffer ECC error on FM side (Valid for FM rev < 6)*/
+ e_FM_EX_DMA_SINGLE_PORT_ECC,
+ /**< Single Port ECC error on FM side (Valid for FM rev > 6)*/
+ e_FM_EX_FPM_STALL_ON_TASKS, /**< Stall of tasks on FPM */
+ e_FM_EX_FPM_SINGLE_ECC, /**< Single ECC on FPM. */
+ e_FM_EX_FPM_DOUBLE_ECC, /**< Double ECC error on FPM ram access */
+ e_FM_EX_QMI_SINGLE_ECC, /**< Single ECC on QMI. */
+ e_FM_EX_QMI_DOUBLE_ECC, /**< Double bit ECC occurred on QMI */
+ e_FM_EX_QMI_DEQ_FROM_UNKNOWN_PORTID,/**< Dequeue from unknown port id */
+ e_FM_EX_BMI_LIST_RAM_ECC, /**< Linked List RAM ECC error */
+ e_FM_EX_BMI_STORAGE_PROFILE_ECC,/**< Storage Profile ECC Error */
+ e_FM_EX_BMI_STATISTICS_RAM_ECC, /**< Statistics Count RAM ECC Error Enable */
+ e_FM_EX_BMI_DISPATCH_RAM_ECC, /**< Dispatch RAM ECC Error Enable */
+ e_FM_EX_IRAM_ECC, /**< Double bit ECC occurred on IRAM*/
+ e_FM_EX_MURAM_ECC /**< Double bit ECC occurred on MURAM*/
+} e_FmExceptions;
+
+/**
+ @Description Enum for defining port DMA swap mode
+*/
+typedef enum e_FmDmaSwapOption {
+ e_FM_DMA_NO_SWP, /**< No swap, transfer data as is.*/
+ e_FM_DMA_SWP_PPC_LE, /**< The transferred data should be swapped
+ in PowerPc Little Endian mode. */
+ e_FM_DMA_SWP_BE /**< The transferred data should be swapped
+ in Big Endian mode */
+} e_FmDmaSwapOption;
+
+/**
+ @Description Enum for defining port DMA cache attributes
+*/
+typedef enum e_FmDmaCacheOption {
+ e_FM_DMA_NO_STASH = 0, /**< Cacheable, no Allocate (No Stashing) */
+ e_FM_DMA_STASH = 1 /**< Cacheable and Allocate (Stashing on) */
+} e_FmDmaCacheOption;
+/**
+ @Group lnx_usr_FM_init_grp FM Initialization Unit
+
+ @Description FM Initialization Unit
+
+ Initialization Flow
+ Initialization of the FM Module will be carried out by the application
+ according to the following sequence:
+ - Calling the configuration routine with basic parameters.
+ - Calling the advance initialization routines to change driver's defaults.
+ - Calling the initialization routine.
+
+ @{
+*/
+
+t_Handle FM_Open(uint8_t id);
+void FM_Close(t_Handle h_Fm);
+
+/**
+ @Description A structure for defining buffer prefix area content.
+*/
+typedef struct t_FmBufferPrefixContent {
+ uint16_t privDataSize; /**< Number of bytes to be left at the beginning
+ of the external buffer; Note that the private-area will
+ start from the base of the buffer address. */
+ bool passPrsResult; /**< TRUE to pass the parse result to/from the FM;
+ User may use FM_PORT_GetBufferPrsResult() in order to
+ get the parser-result from a buffer. */
+ bool passTimeStamp; /**< TRUE to pass the timeStamp to/from the FM
+ User may use FM_PORT_GetBufferTimeStamp() in order to
+ get the parser-result from a buffer. */
+ bool passHashResult; /**< TRUE to pass the KG hash result to/from the FM
+ User may use FM_PORT_GetBufferHashResult() in order to
+ get the parser-result from a buffer. */
+ bool passAllOtherPCDInfo;/**< Add all other Internal-Context information:
+ AD, hash-result, key, etc. */
+ uint16_t dataAlign;
+ /**< 0 to use driver's default alignment [64],
+ other value for selecting a data alignment (must be a power of 2);
+ if write optimization is used, must be >= 16. */
+ uint8_t manipExtraSpace;
+ /**< Maximum extra size needed (insertion-size minus removal-size);
+ Note that this field impacts the size of the buffer-prefix
+ (i.e. it pushes the data offset);
+ This field is irrelevant if DPAA_VERSION==10 */
+} t_FmBufferPrefixContent;
+
+/**
+ @Description A structure of information about each of the external
+ buffer pools used by a port or storage-profile.
+*/
+typedef struct t_FmExtPoolParams {
+ uint8_t id; /**< External buffer pool id */
+ uint16_t size; /**< External buffer pool buffer size */
+} t_FmExtPoolParams;
+
+/**
+ @Description A structure for informing the driver about the external
+ buffer pools allocated in the BM and used by a port or a
+ storage-profile.
+*/
+typedef struct t_FmExtPools {
+ uint8_t numOfPoolsUsed; /**< Number of pools use by this port */
+ t_FmExtPoolParams extBufPool[FM_PORT_MAX_NUM_OF_EXT_POOLS];
+ /**< Parameters for each port */
+} t_FmExtPools;
+
+/**
+ @Description A structure for defining backup BM Pools.
+*/
+typedef struct t_FmBackupBmPools {
+ uint8_t numOfBackupPools; /**< Number of BM backup pools -
+ must be smaller than the total number of
+ pools defined for the specified port.*/
+ uint8_t poolIds[FM_PORT_MAX_NUM_OF_EXT_POOLS];
+ /**< numOfBackupPools pool id's, specifying which
+ pools should be used only as backup. Pool
+ id's specified here must be a subset of the
+ pools used by the specified port.*/
+} t_FmBackupBmPools;
+
+/**
+ @Description A structure for defining BM pool depletion criteria
+*/
+typedef struct t_FmBufPoolDepletion {
+ bool poolsGrpModeEnable;
+ /**< select mode in which pause frames will be sent after
+ a number of pools (all together!) are depleted */
+ uint8_t numOfPools;
+ /**< the number of depleted pools that will invoke
+ pause frames transmission. */
+ bool poolsToConsider[BM_MAX_NUM_OF_POOLS];
+ /**< For each pool, TRUE if it should be considered for
+ depletion (Note - this pool must be used by this port!). */
+ bool singlePoolModeEnable;
+ /**< select mode in which pause frames will be sent after
+ a single-pool is depleted; */
+ bool poolsToConsiderForSingleMode[BM_MAX_NUM_OF_POOLS];
+ /**< For each pool, TRUE if it should be considered for
+ depletion (Note - this pool must be used by this port!) */
+#if (DPAA_VERSION >= 11)
+ bool pfcPrioritiesEn[FM_MAX_NUM_OF_PFC_PRIORITIES];
+ /**< This field is used by the MAC as the Priority Enable Vector
+ in the PFC frame which is transmitted */
+#endif /* (DPAA_VERSION >= 11) */
+} t_FmBufPoolDepletion;
+
+/** @} */ /* end of lnx_usr_FM_init_grp group */
+
+/**
+ @Group lnx_usr_FM_runtime_control_grp FM Runtime Control Unit
+
+ @Description FM Runtime control unit API functions, definitions and enums.
+ The FM driver provides a set of control routines.
+ These routines may only be called after the module was fully
+ initialized (both configuration and initialization routines were
+ called). They are typically used to get information from hardware
+ (status, counters/statistics, revision etc.), to modify a current
+ state or to force/enable a required action. Run-time control may
+ be called whenever necessary and as many times as needed.
+ @{
+*/
+
+/**
+ @Collection General FM defines.
+*/
+#define FM_MAX_NUM_OF_VALID_PORTS (FM_MAX_NUM_OF_OH_PORTS + \
+ FM_MAX_NUM_OF_1G_RX_PORTS + \
+ FM_MAX_NUM_OF_10G_RX_PORTS + \
+ FM_MAX_NUM_OF_1G_TX_PORTS + \
+ FM_MAX_NUM_OF_10G_TX_PORTS)
+ /**< Number of available FM ports */
+/* @} */
+
+/**
+ @Description A structure for Port bandwidth requirement. Port is identified
+ by type and relative id.
+*/
+typedef struct t_FmPortBandwidth {
+ e_FmPortType type; /**< FM port type */
+ uint8_t relativePortId; /**< Type relative port id */
+ uint8_t bandwidth; /**< bandwidth - (in term of percents) */
+} t_FmPortBandwidth;
+
+/**
+ @Description A Structure containing an array of Port bandwidth requirements.
+ The user should state the ports requiring bandwidth in terms of
+ percentage - i.e. all port's bandwidths in the array must add
+ up to 100.
+*/
+typedef struct t_FmPortsBandwidthParams {
+ uint8_t numOfPorts;
+ /**< The number of relevant ports, which is the
+ number of valid entries in the array below */
+ t_FmPortBandwidth portsBandwidths[FM_MAX_NUM_OF_VALID_PORTS];
+ /**< for each port, it's bandwidth (all port's bw must add up to 100.*/
+} t_FmPortsBandwidthParams;
+
+/**
+ @Description Enum for defining FM counters
+*/
+typedef enum e_FmCounters {
+ e_FM_COUNTERS_ENQ_TOTAL_FRAME = 0,/**< QMI total enqueued frames counter */
+ e_FM_COUNTERS_DEQ_TOTAL_FRAME, /**< QMI total dequeued frames counter */
+ e_FM_COUNTERS_DEQ_0, /**< QMI 0 frames from QMan counter */
+ e_FM_COUNTERS_DEQ_1, /**< QMI 1 frames from QMan counter */
+ e_FM_COUNTERS_DEQ_2, /**< QMI 2 frames from QMan counter */
+ e_FM_COUNTERS_DEQ_3, /**< QMI 3 frames from QMan counter */
+ e_FM_COUNTERS_DEQ_FROM_DEFAULT, /**< QMI dq from default queue counter */
+ e_FM_COUNTERS_DEQ_FROM_CONTEXT, /**< QMI dq from FQ context counter */
+ e_FM_COUNTERS_DEQ_FROM_FD, /**< QMI dq from FD command field counter */
+ e_FM_COUNTERS_DEQ_CONFIRM /**< QMI dq confirm counter */
+} e_FmCounters;
+
+/**
+ @Description A structure for returning FM revision information
+*/
+typedef struct t_FmRevisionInfo {
+ uint8_t majorRev; /**< Major revision */
+ uint8_t minorRev; /**< Minor revision */
+} t_FmRevisionInfo;
+
+/**
+ @Description A structure for returning FM ctrl code revision information
+*/
+typedef struct t_FmCtrlCodeRevisionInfo {
+ uint16_t packageRev; /**< Package revision */
+ uint8_t majorRev; /**< Major revision */
+ uint8_t minorRev; /**< Minor revision */
+} t_FmCtrlCodeRevisionInfo;
+
+/**
+ @Description A Structure for obtaining FM controller monitor values
+*/
+typedef struct t_FmCtrlMon {
+ uint8_t percentCnt[2]; /**< Percentage value */
+} t_FmCtrlMon;
+
+/**
+ @Function FM_SetPortsBandwidth
+
+ @Description Sets relative weights between ports when accessing common resources.
+
+ @Param[in] h_Fm A handle to an FM Module.
+ @Param[in] p_PortsBandwidth A structure of ports bandwidths in percentage, i.e.
+ total must equal 100.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_Init().
+*/
+uint32_t FM_SetPortsBandwidth(t_Handle h_Fm,
+ t_FmPortsBandwidthParams *p_PortsBandwidth);
+
+/**
+ @Function FM_GetRevision
+
+ @Description Returns the FM revision
+
+ @Param[in] h_Fm A handle to an FM Module.
+ @Param[out] p_FmRevisionInfo A structure of revision information parameters.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_Init().
+*/
+uint32_t FM_GetRevision(t_Handle h_Fm,
+ t_FmRevisionInfo *p_FmRevisionInfo);
+
+/**
+ @Function FM_GetFmanCtrlCodeRevision
+
+ @Description Returns the Fman controller code revision
+ (Not implemented in fm-lib just yet!)
+
+ @Param[in] h_Fm A handle to an FM Module.
+ @Param[out] p_RevisionInfo A structure of revision information parameters.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_Init().
+*/
+uint32_t FM_GetFmanCtrlCodeRevision(t_Handle h_Fm,
+ t_FmCtrlCodeRevisionInfo *p_RevisionInfo);
+
+/**
+ @Function FM_GetCounter
+
+ @Description Reads one of the FM counters.
+
+ @Param[in] h_Fm A handle to an FM Module.
+ @Param[in] counter The requested counter.
+
+ @Return Counter's current value.
+
+ @Cautions Allowed only following FM_Init().
+ Note that it is user's responsibility to call this routine only
+ for enabled counters, and there will be no indication if a
+ disabled counter is accessed.
+*/
+uint32_t FM_GetCounter(t_Handle h_Fm, e_FmCounters counter);
+
+/**
+ @Function FM_ModifyCounter
+
+ @Description Sets a value to an enabled counter. Use "0" to reset the counter.
+
+ @Param[in] h_Fm A handle to an FM Module.
+ @Param[in] counter The requested counter.
+ @Param[in] val The requested value to be written into the counter.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_Init().
+*/
+uint32_t FM_ModifyCounter(t_Handle h_Fm,
+ e_FmCounters counter, uint32_t val);
+
+/**
+ @Function FM_CtrlMonStart
+
+ @Description Start monitoring utilization of all available FM controllers.
+
+ In order to obtain FM controllers utilization the following sequence
+ should be used:
+ -# FM_CtrlMonStart()
+ -# FM_CtrlMonStop()
+ -# FM_CtrlMonGetCounters() - issued for each FM controller
+
+ @Param[in] h_Fm A handle to an FM Module.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_Init().
+ This routine should NOT be called from guest-partition
+ (i.e. guestId != NCSW_MASTER_ID).
+*/
+uint32_t FM_CtrlMonStart(t_Handle h_Fm);
+
+/**
+ @Function FM_CtrlMonStop
+
+ @Description Stop monitoring utilization of all available FM controllers.
+
+ In order to obtain FM controllers utilization the following sequence
+ should be used:
+ -# FM_CtrlMonStart()
+ -# FM_CtrlMonStop()
+ -# FM_CtrlMonGetCounters() - issued for each FM controller
+
+ @Param[in] h_Fm A handle to an FM Module.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_Init().
+ This routine should NOT be called from guest-partition
+ (i.e. guestId != NCSW_MASTER_ID).
+*/
+uint32_t FM_CtrlMonStop(t_Handle h_Fm);
+
+/**
+ @Function FM_CtrlMonGetCounters
+
+ @Description Obtain FM controller utilization parameters.
+
+ In order to obtain FM controllers utilization the following sequence
+ should be used:
+ -# FM_CtrlMonStart()
+ -# FM_CtrlMonStop()
+ -# FM_CtrlMonGetCounters() - issued for each FM controller
+
+ @Param[in] h_Fm A handle to an FM Module.
+ @Param[in] fmCtrlIndex FM Controller index for that utilization results
+ are requested.
+ @Param[in] p_Mon Pointer to utilization results structure.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_Init().
+ This routine should NOT be called from guest-partition
+ (i.e. guestId != NCSW_MASTER_ID).
+*/
+uint32_t FM_CtrlMonGetCounters(t_Handle h_Fm,
+ uint8_t fmCtrlIndex, t_FmCtrlMon *p_Mon);
+
+/*
+ @Function FM_ForceIntr
+
+ @Description Causes an interrupt event on the requested source.
+
+ @Param[in] h_Fm A handle to an FM Module.
+ @Param[in] exception An exception to be forced.
+
+ @Return E_OK on success; Error code if the exception is not enabled,
+ or is not able to create interrupt.
+
+ @Cautions Allowed only following FM_Init().
+*/
+uint32_t FM_ForceIntr(t_Handle h_Fm, e_FmExceptions exception);
+
+/** @} */ /* end of lnx_usr_FM_runtime_control_grp group */
+/** @} */ /* end of lnx_usr_FM_lib_grp group */
+/** @} */ /* end of lnx_usr_FM_grp group */
+
+/**
+@Description FM Char device ioctls
+*/
+
+/**
+ @Group lnx_ioctl_FM_grp Frame Manager Linux IOCTL API
+
+ @Description FM Linux ioctls definitions and enums
+
+ @{
+*/
+
+/**
+ @Collection FM IOCTL device ('/dev') definitions
+*/
+#define DEV_FM_NAME "fm" /**< Name of the FM chardev */
+
+#define DEV_FM_MINOR_BASE 0
+#define DEV_FM_PCD_MINOR_BASE (DEV_FM_MINOR_BASE + 1)
+ /*/dev/fmx-pcd */
+#define DEV_FM_OH_PORTS_MINOR_BASE (DEV_FM_PCD_MINOR_BASE + 1)
+ /*/dev/fmx-port-ohy */
+#define DEV_FM_RX_PORTS_MINOR_BASE (DEV_FM_OH_PORTS_MINOR_BASE + FM_MAX_NUM_OF_OH_PORTS) /*/dev/fmx-port-rxy */
+#define DEV_FM_TX_PORTS_MINOR_BASE (DEV_FM_RX_PORTS_MINOR_BASE + FM_MAX_NUM_OF_RX_PORTS) /*/dev/fmx-port-txy */
+#define DEV_FM_MAX_MINORS (DEV_FM_TX_PORTS_MINOR_BASE + FM_MAX_NUM_OF_TX_PORTS)
+
+#define FM_IOC_NUM(n) (n)
+#define FM_PCD_IOC_NUM(n) (n + 20)
+#define FM_PORT_IOC_NUM(n) (n + 70)
+/* @} */
+
+#define IOC_FM_MAX_NUM_OF_PORTS 64
+
+/**
+ @Description Enum for defining port types
+ (must match enum e_FmPortType defined in fm_ext.h)
+*/
+typedef enum ioc_fm_port_type {
+ e_IOC_FM_PORT_TYPE_OH_OFFLINE_PARSING = 0, /**< Offline parsing port */
+ e_IOC_FM_PORT_TYPE_RX, /**< 1G Rx port */
+ e_IOC_FM_PORT_TYPE_RX_10G, /**< 10G Rx port */
+ e_IOC_FM_PORT_TYPE_TX, /**< 1G Tx port */
+ e_IOC_FM_PORT_TYPE_TX_10G, /**< 10G Tx port */
+ e_IOC_FM_PORT_TYPE_DUMMY
+} ioc_fm_port_type;
+
+/**
+ @Group lnx_ioctl_FM_lib_grp FM library
+
+ @Description FM API functions, definitions and enums
+ The FM module is the main driver module and is a mandatory module
+ for FM driver users. Before any further module initialization,
+ this module must be initialized.
+ The FM is a "single-tone" module. It is responsible of the common
+ HW modules: FPM, DMA, common QMI, common BMI initializations and
+ run-time control routines. This module must be initialized always
+ when working with any of the FM modules.
+ NOTE - We assumes that the FML will be initialize only by core No. 0!
+
+ @{
+*/
+
+/**
+ @Description FM Exceptions
+*/
+typedef enum ioc_fm_exceptions {
+ e_IOC_FM_EX_DMA_BUS_ERROR, /**< DMA bus error. */
+ e_IOC_EX_DMA_READ_ECC,
+ /**< Read Buffer ECC error (Valid for FM rev < 6)*/
+ e_IOC_EX_DMA_SYSTEM_WRITE_ECC,
+ /**< Write Buffer ECC error on system side (Valid for FM rev < 6)*/
+ e_IOC_EX_DMA_FM_WRITE_ECC,
+ /**< Write Buffer ECC error on FM side (Valid for FM rev < 6)*/
+ e_IOC_EX_DMA_SINGLE_PORT_ECC,
+ /**< Single Port ECC error on FM side (Valid for FM rev > 6)*/
+ e_IOC_EX_FPM_STALL_ON_TASKS, /**< Stall of tasks on FPM */
+ e_IOC_EX_FPM_SINGLE_ECC, /**< Single ECC on FPM. */
+ e_IOC_EX_FPM_DOUBLE_ECC, /**< Double ECC error on FPM ram access */
+ e_IOC_EX_QMI_SINGLE_ECC, /**< Single ECC on QMI. */
+ e_IOC_EX_QMI_DOUBLE_ECC, /**< Double bit ECC occurred on QMI */
+ e_IOC_EX_QMI_DEQ_FROM_UNKNOWN_PORTID,/**< Dequeue from unknown port id */
+ e_IOC_EX_BMI_LIST_RAM_ECC, /**< Linked List RAM ECC error */
+ e_IOC_EX_BMI_STORAGE_PROFILE_ECC,/**< Storage Profile ECC Error */
+ e_IOC_EX_BMI_STATISTICS_RAM_ECC,/**< Statistics Count RAM ECC Error Enable */
+ e_IOC_EX_BMI_DISPATCH_RAM_ECC, /**< Dispatch RAM ECC Error Enable */
+ e_IOC_EX_IRAM_ECC, /**< Double bit ECC occurred on IRAM*/
+ e_IOC_EX_MURAM_ECC /**< Double bit ECC occurred on MURAM*/
+} ioc_fm_exceptions;
+
+/**
+ @Group lnx_ioctl_FM_runtime_control_grp FM Runtime Control Unit
+
+ @Description FM Runtime control unit API functions, definitions and enums.
+ The FM driver provides a set of control routines for each module.
+ These routines may only be called after the module was fully
+ initialized (both configuration and initialization routines were
+ called). They are typically used to get information from hardware
+ (status, counters/statistics, revision etc.), to modify a current
+ state or to force/enable a required action. Run-time control may
+ be called whenever necessary and as many times as needed.
+ @{
+*/
+
+/**
+ @Collection General FM defines.
+ */
+#define IOC_FM_MAX_NUM_OF_VALID_PORTS (FM_MAX_NUM_OF_OH_PORTS + \
+ FM_MAX_NUM_OF_1G_RX_PORTS + \
+ FM_MAX_NUM_OF_10G_RX_PORTS + \
+ FM_MAX_NUM_OF_1G_TX_PORTS + \
+ FM_MAX_NUM_OF_10G_TX_PORTS)
+/* @} */
+
+/**
+ @Description Structure for Port bandwidth requirement. Port is identified
+ by type and relative id.
+ (must be identical to t_FmPortBandwidth defined in fm_ext.h)
+*/
+typedef struct ioc_fm_port_bandwidth_t {
+ ioc_fm_port_type type; /**< FM port type */
+ uint8_t relative_port_id; /**< Type relative port id */
+ uint8_t bandwidth; /**< bandwidth - (in term of percents) */
+} ioc_fm_port_bandwidth_t;
+
+/**
+ @Description A Structure containing an array of Port bandwidth requirements.
+ The user should state the ports requiring bandwidth in terms of
+ percentage - i.e. all port's bandwidths in the array must add
+ up to 100.
+ (must be identical to t_FmPortsBandwidthParams defined in fm_ext.h)
+*/
+typedef struct ioc_fm_port_bandwidth_params {
+ uint8_t num_of_ports;
+ /**< num of ports listed in the array below */
+ ioc_fm_port_bandwidth_t ports_bandwidths[IOC_FM_MAX_NUM_OF_VALID_PORTS];
+ /**< for each port, it's bandwidth (all port's
+ bandwidths must add up to 100.*/
+} ioc_fm_port_bandwidth_params;
+
+/**
+ @Description enum for defining FM counters
+*/
+typedef enum ioc_fm_counters {
+ e_IOC_FM_COUNTERS_ENQ_TOTAL_FRAME,/**< QMI total enqueued frames counter */
+ e_IOC_FM_COUNTERS_DEQ_TOTAL_FRAME,/**< QMI total dequeued frames counter */
+ e_IOC_FM_COUNTERS_DEQ_0, /**< QMI 0 frames from QMan counter */
+ e_IOC_FM_COUNTERS_DEQ_1, /**< QMI 1 frames from QMan counter */
+ e_IOC_FM_COUNTERS_DEQ_2, /**< QMI 2 frames from QMan counter */
+ e_IOC_FM_COUNTERS_DEQ_3, /**< QMI 3 frames from QMan counter */
+ e_IOC_FM_COUNTERS_DEQ_FROM_DEFAULT,
+ /**< QMI dequeue from default queue counter */
+ e_IOC_FM_COUNTERS_DEQ_FROM_CONTEXT,
+ /**< QMI dequeue from FQ context counter */
+ e_IOC_FM_COUNTERS_DEQ_FROM_FD,
+ /**< QMI dequeue from FD command field counter */
+ e_IOC_FM_COUNTERS_DEQ_CONFIRM, /**< QMI dequeue confirm counter */
+} ioc_fm_counters;
+
+typedef struct ioc_fm_obj_t {
+ void *obj;
+} ioc_fm_obj_t;
+
+/**
+ @Description A structure for returning revision information
+ (must match struct t_FmRevisionInfo declared in fm_ext.h)
+*/
+typedef struct ioc_fm_revision_info_t {
+ uint8_t major; /**< Major revision */
+ uint8_t minor; /**< Minor revision */
+} ioc_fm_revision_info_t;
+
+/**
+ @Description A structure for FM counters
+*/
+typedef struct ioc_fm_counters_params_t {
+ ioc_fm_counters cnt;/**< The requested counter */
+ uint32_t val;/**< The requested value to get/set from/into the counter */
+} ioc_fm_counters_params_t;
+
+typedef union ioc_fm_api_version_t {
+ struct {
+ uint8_t major;
+ uint8_t minor;
+ uint8_t respin;
+ uint8_t reserved;
+ } version;
+ uint32_t ver;
+} ioc_fm_api_version_t;
+
+typedef struct fm_ctrl_mon_t {
+ uint8_t percent_cnt[2];
+} fm_ctrl_mon_t;
+
+typedef struct ioc_fm_ctrl_mon_counters_params_t {
+ uint8_t fm_ctrl_index;
+ fm_ctrl_mon_t *p_mon;
+} ioc_fm_ctrl_mon_counters_params_t;
+
+/**
+ @Function FM_IOC_SET_PORTS_BANDWIDTH
+
+ @Description Sets relative weights between ports when accessing common resources.
+
+ @Param[in] ioc_fm_port_bandwidth_params Port bandwidth percentages,
+ their sum must equal 100.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_Init().
+*/
+#define FM_IOC_SET_PORTS_BANDWIDTH \
+ _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(2), ioc_fm_port_bandwidth_params)
+
+/**
+ @Function FM_IOC_GET_REVISION
+
+ @Description Returns the FM revision
+
+ @Param[out] ioc_fm_revision_info_t A structure of revision information parameters.
+
+ @Return None.
+
+ @Cautions Allowed only following FM_Init().
+*/
+#define FM_IOC_GET_REVISION \
+ _IOR(FM_IOC_TYPE_BASE, FM_IOC_NUM(3), ioc_fm_revision_info_t)
+
+/**
+ @Function FM_IOC_GET_COUNTER
+
+ @Description Reads one of the FM counters.
+
+ @Param[in,out] ioc_fm_counters_params_t The requested counter parameters.
+
+ @Return Counter's current value.
+
+ @Cautions Allowed only following FM_Init().
+ Note that it is user's responsibilty to call this routine only
+ for enabled counters, and there will be no indication if a
+ disabled counter is accessed.
+*/
+#define FM_IOC_GET_COUNTER \
+ _IOWR(FM_IOC_TYPE_BASE, FM_IOC_NUM(4), ioc_fm_counters_params_t)
+
+/**
+ @Function FM_IOC_SET_COUNTER
+
+ @Description Sets a value to an enabled counter. Use "0" to reset the counter.
+
+ @Param[in] ioc_fm_counters_params_t The requested counter parameters.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_Init().
+*/
+#define FM_IOC_SET_COUNTER \
+ _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(5), ioc_fm_counters_params_t)
+
+/**
+ @Function FM_IOC_FORCE_INTR
+
+ @Description Causes an interrupt event on the requested source.
+
+ @Param[in] ioc_fm_exceptions An exception to be forced.
+
+ @Return E_OK on success; Error code if the exception is not enabled,
+ or is not able to create interrupt.
+
+ @Cautions Allowed only following FM_Init().
+*/
+#define FM_IOC_FORCE_INTR \
+ _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(6), ioc_fm_exceptions)
+
+/**
+ @Function FM_IOC_GET_API_VERSION
+
+ @Description Reads the FMD IOCTL API version.
+
+ @Param[in,out] ioc_fm_api_version_t The requested counter parameters.
+
+ @Return Version's value.
+*/
+#define FM_IOC_GET_API_VERSION \
+ _IOR(FM_IOC_TYPE_BASE, FM_IOC_NUM(7), ioc_fm_api_version_t)
+
+/**
+ @Function FM_CtrlMonStart
+
+ @Description Start monitoring utilization of all available FM controllers.
+
+ In order to obtain FM controllers utilization the following sequence
+ should be used:
+ -# FM_CtrlMonStart()
+ -# FM_CtrlMonStop()
+ -# FM_CtrlMonGetCounters() - issued for each FM controller
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_Init().
+*/
+#define FM_IOC_CTRL_MON_START \
+ _IO(FM_IOC_TYPE_BASE, FM_IOC_NUM(15))
+
+/**
+ @Function FM_CtrlMonStop
+
+ @Description Stop monitoring utilization of all available FM controllers.
+
+ In order to obtain FM controllers utilization the following sequence
+ should be used:
+ -# FM_CtrlMonStart()
+ -# FM_CtrlMonStop()
+ -# FM_CtrlMonGetCounters() - issued for each FM controller
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_Init().
+*/
+#define FM_IOC_CTRL_MON_STOP \
+ _IO(FM_IOC_TYPE_BASE, FM_IOC_NUM(16))
+
+/**
+ @Function FM_CtrlMonGetCounters
+
+ @Description Obtain FM controller utilization parameters.
+
+ In order to obtain FM controllers utilization the following sequence
+ should be used:
+ -# FM_CtrlMonStart()
+ -# FM_CtrlMonStop()
+ -# FM_CtrlMonGetCounters() - issued for each FM controller
+
+ @Param[in] ioc_fm_ctrl_mon_counters_params_t
+ A structure holding the required parameters.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_Init().
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_IOC_CTRL_MON_GET_COUNTERS_COMPAT \
+ _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(17), ioc_compat_fm_ctrl_mon_counters_params_t)
+#endif
+#define FM_IOC_CTRL_MON_GET_COUNTERS \
+ _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(17), ioc_fm_ctrl_mon_counters_params_t)
+
+/** @} */ /* end of lnx_ioctl_FM_runtime_control_grp group */
+/** @} */ /* end of lnx_ioctl_FM_lib_grp group */
+/** @} */ /* end of lnx_ioctl_FM_grp */
+
+#define FMD_API_VERSION_MAJOR 21
+#define FMD_API_VERSION_MINOR 1
+#define FMD_API_VERSION_RESPIN 0
+
+#endif /* __FM_EXT_H */
new file mode 100644
@@ -0,0 +1,557 @@
+/* SPDX-License-Identifier: (BSD-3-Clause OR GPL-2.0)
+ * Copyright 2008-2012 Freescale Semiconductor Inc.
+ * Copyright 2017-2020 NXP
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <unistd.h>
+#include <termios.h>
+#include <sys/ioctl.h>
+#include <stdbool.h>
+#include <rte_common.h>
+
+#include "fm_ext.h"
+#include "fm_pcd_ext.h"
+#include "fm_port_ext.h"
+#include <dpaa_ethdev.h>
+
+#define DEV_TO_ID(p) \
+ do { \
+ t_Device *p_Dev = (t_Device *)p; \
+ p = UINT_TO_PTR(p_Dev->id); \
+ } while (0)
+
+/* Major and minor are in sync with FMD, respin is for fmlib identification */
+#define FM_LIB_VERSION_MAJOR 21
+#define FM_LIB_VERSION_MINOR 1
+#define FM_LIB_VERSION_RESPIN 0
+
+#if (FMD_API_VERSION_MAJOR != FM_LIB_VERSION_MAJOR) || \
+ (FMD_API_VERSION_MINOR != FM_LIB_VERSION_MINOR)
+#warning FMD and FMLIB version mismatch
+#endif
+
+uint32_t FM_GetApiVersion(t_Handle h_Fm, ioc_fm_api_version_t *p_version);
+
+t_Handle FM_Open(uint8_t id)
+{
+ t_Device *p_Dev;
+ int fd;
+ char devName[20];
+ static bool called;
+ ioc_fm_api_version_t ver;
+
+ _fml_dbg("Calling...\n");
+
+ p_Dev = (t_Device *)malloc(sizeof(t_Device));
+ if (!p_Dev)
+ return NULL;
+
+ memset(devName, 0, 20);
+ sprintf(devName, "%s%s%d", "/dev/", DEV_FM_NAME, id);
+ fd = open(devName, O_RDWR);
+ if (fd < 0) {
+ free(p_Dev);
+ return NULL;
+ }
+
+ p_Dev->id = id;
+ p_Dev->fd = fd;
+ if (!called) {
+ called = true;
+ FM_GetApiVersion((t_Handle)p_Dev, &ver);
+
+ if (FMD_API_VERSION_MAJOR != ver.version.major ||
+ FMD_API_VERSION_MINOR != ver.version.minor ||
+ FMD_API_VERSION_RESPIN != ver.version.respin) {
+ DPAA_PMD_WARN("Compiled against FMD API ver %u.%u.%u",
+ FMD_API_VERSION_MAJOR,
+ FMD_API_VERSION_MINOR, FMD_API_VERSION_RESPIN);
+ DPAA_PMD_WARN("Running with FMD API ver %u.%u.%u",
+ ver.version.major, ver.version.minor,
+ ver.version.respin);
+ }
+ }
+ _fml_dbg("Finishing.\n");
+
+ return (t_Handle)p_Dev;
+}
+
+void FM_Close(t_Handle h_Fm)
+{
+ t_Device *p_Dev = (t_Device *)h_Fm;
+
+ _fml_dbg("Calling...\n");
+
+ close(p_Dev->fd);
+ free(p_Dev);
+
+ _fml_dbg("Finishing.\n");
+}
+
+uint32_t FM_GetApiVersion(t_Handle h_Fm, ioc_fm_api_version_t *p_version)
+{
+ t_Device *p_Dev = (t_Device *)h_Fm;
+ int ret;
+
+ _fml_dbg("Calling...\n");
+
+ ret = ioctl(p_Dev->fd, FM_IOC_GET_API_VERSION, p_version);
+ if (ret) {
+ DPAA_PMD_ERR("cannot get API version, error %i (%s)\n",
+ errno, strerror(errno));
+ RETURN_ERROR(MINOR, E_INVALID_OPERATION, NO_MSG);
+ }
+ _fml_dbg("Finishing.\n");
+
+ return E_OK;
+}
+
+t_Handle FM_PCD_Open(t_FmPcdParams *p_FmPcdParams)
+{
+ t_Device *p_Dev;
+ int fd;
+ char devName[20];
+
+ _fml_dbg("Calling...\n");
+
+ p_Dev = (t_Device *)malloc(sizeof(t_Device));
+ if (!p_Dev)
+ return NULL;
+
+ memset(devName, 0, 20);
+ sprintf(devName, "%s%s%u-pcd", "/dev/", DEV_FM_NAME,
+ (uint32_t)((t_Device *)p_FmPcdParams->h_Fm)->id);
+ fd = open(devName, O_RDWR);
+ if (fd < 0) {
+ free(p_Dev);
+ return NULL;
+ }
+
+ p_Dev->id = ((t_Device *)p_FmPcdParams->h_Fm)->id;
+ p_Dev->fd = fd;
+ p_Dev->owners = 0;
+
+ _fml_dbg("Finishing.\n");
+
+ return (t_Handle)p_Dev;
+}
+
+void FM_PCD_Close(t_Handle h_FmPcd)
+{
+ t_Device *p_Dev = (t_Device *)h_FmPcd;
+
+ _fml_dbg("Calling...\n");
+
+ close(p_Dev->fd);
+
+ if (p_Dev->owners) {
+ printf(
+ "\nTrying to delete a previously created pcd handler(owners:%u)!!\n",
+ p_Dev->owners);
+ return;
+ }
+
+ free(p_Dev);
+
+ _fml_dbg("Finishing.\n");
+}
+
+uint32_t FM_PCD_Enable(t_Handle h_FmPcd)
+{
+ t_Device *p_Dev = (t_Device *)h_FmPcd;
+
+ _fml_dbg("Calling...\n");
+
+ if (ioctl(p_Dev->fd, FM_PCD_IOC_ENABLE))
+ RETURN_ERROR(MINOR, E_INVALID_OPERATION, NO_MSG);
+
+ _fml_dbg("Finishing.\n");
+
+ return E_OK;
+}
+
+uint32_t FM_PCD_Disable(t_Handle h_FmPcd)
+{
+ t_Device *p_Dev = (t_Device *)h_FmPcd;
+
+ _fml_dbg("Calling...\n");
+
+ if (ioctl(p_Dev->fd, FM_PCD_IOC_DISABLE))
+ RETURN_ERROR(MINOR, E_INVALID_OPERATION, NO_MSG);
+
+ _fml_dbg("Finishing.\n");
+
+ return E_OK;
+}
+
+t_Handle FM_PCD_NetEnvCharacteristicsSet(t_Handle h_FmPcd,
+ ioc_fm_pcd_net_env_params_t *params)
+{
+ t_Device *p_PcdDev = (t_Device *)h_FmPcd;
+ t_Device *p_Dev = NULL;
+
+ _fml_dbg("Calling...\n");
+
+ params->id = NULL;
+
+ if (ioctl(p_PcdDev->fd, FM_PCD_IOC_NET_ENV_CHARACTERISTICS_SET, params))
+ return NULL;
+
+ p_Dev = (t_Device *)malloc(sizeof(t_Device));
+ if (!p_Dev)
+ return NULL;
+
+ memset(p_Dev, 0, sizeof(t_Device));
+ p_Dev->h_UserPriv = (t_Handle)p_PcdDev;
+ p_PcdDev->owners++;
+ p_Dev->id = PTR_TO_UINT(params->id);
+
+ _fml_dbg("Finishing.\n");
+
+ return (t_Handle)p_Dev;
+}
+
+uint32_t FM_PCD_NetEnvCharacteristicsDelete(t_Handle h_NetEnv)
+{
+ t_Device *p_Dev = (t_Device *)h_NetEnv;
+ t_Device *p_PcdDev = NULL;
+ ioc_fm_obj_t id;
+
+ _fml_dbg("Calling...\n");
+
+ p_PcdDev = (t_Device *)p_Dev->h_UserPriv;
+ id.obj = UINT_TO_PTR(p_Dev->id);
+
+ if (ioctl(p_PcdDev->fd, FM_PCD_IOC_NET_ENV_CHARACTERISTICS_DELETE, &id))
+ RETURN_ERROR(MINOR, E_INVALID_OPERATION, NO_MSG);
+
+ p_PcdDev->owners--;
+ free(p_Dev);
+
+ _fml_dbg("Finishing.\n");
+
+ return E_OK;
+}
+
+t_Handle FM_PCD_KgSchemeSet(t_Handle h_FmPcd,
+ ioc_fm_pcd_kg_scheme_params_t *params)
+{
+ t_Device *p_PcdDev = (t_Device *)h_FmPcd;
+ t_Device *p_Dev = NULL;
+ int ret;
+
+ _fml_dbg("Calling...\n");
+
+ params->id = NULL;
+
+ if (params->param.modify) {
+ if (params->param.scm_id.scheme_id)
+ DEV_TO_ID(params->param.scm_id.scheme_id);
+ else
+ return NULL;
+ }
+
+ /* correct h_NetEnv param from scheme */
+ if (params->param.net_env_params.net_env_id)
+ DEV_TO_ID(params->param.net_env_params.net_env_id);
+
+ /* correct next engine params handlers: cc*/
+ if (params->param.next_engine == e_IOC_FM_PCD_CC &&
+ params->param.kg_next_engine_params.cc.tree_id)
+ DEV_TO_ID(params->param.kg_next_engine_params.cc.tree_id);
+
+ ret = ioctl(p_PcdDev->fd, FM_PCD_IOC_KG_SCHEME_SET, params);
+ if (ret) {
+ DPAA_PMD_ERR(" cannot set kg scheme, error %i (%s)\n",
+ errno, strerror(errno));
+ return NULL;
+ }
+
+ p_Dev = (t_Device *)malloc(sizeof(t_Device));
+ if (!p_Dev)
+ return NULL;
+
+ memset(p_Dev, 0, sizeof(t_Device));
+ p_Dev->h_UserPriv = (t_Handle)p_PcdDev;
+ /* increase owners only if a new scheme is created */
+ if (params->param.modify == false)
+ p_PcdDev->owners++;
+ p_Dev->id = PTR_TO_UINT(params->id);
+
+ _fml_dbg("Finishing.\n");
+
+ return (t_Handle)p_Dev;
+}
+
+uint32_t FM_PCD_KgSchemeDelete(t_Handle h_Scheme)
+{
+ t_Device *p_Dev = (t_Device *)h_Scheme;
+ t_Device *p_PcdDev = NULL;
+ ioc_fm_obj_t id;
+
+ _fml_dbg("Calling...\n");
+
+ p_PcdDev = (t_Device *)p_Dev->h_UserPriv;
+ id.obj = UINT_TO_PTR(p_Dev->id);
+
+ if (ioctl(p_PcdDev->fd, FM_PCD_IOC_KG_SCHEME_DELETE, &id)) {
+ DPAA_PMD_WARN("cannot delete kg scheme, error %i (%s)\n",
+ errno, strerror(errno));
+ RETURN_ERROR(MINOR, E_INVALID_OPERATION, NO_MSG);
+ }
+
+ p_PcdDev->owners--;
+ free(p_Dev);
+
+ _fml_dbg("Finishing.\n");
+
+ return E_OK;
+}
+
+#ifdef FM_CAPWAP_SUPPORT
+#error CAPWAP feature not supported
+#endif
+
+typedef struct {
+ e_FmPortType portType; /**< Port type */
+ uint8_t portId; /**< Port Id - relative to type */
+} t_FmPort;
+
+t_Handle FM_PORT_Open(t_FmPortParams *p_FmPortParams)
+{
+ t_Device *p_Dev;
+ int fd;
+ char devName[30];
+ t_FmPort *p_FmPort;
+
+ _fml_dbg("Calling...\n");
+
+ p_Dev = (t_Device *)malloc(sizeof(t_Device));
+ if (!p_Dev)
+ return NULL;
+
+ memset(p_Dev, 0, sizeof(t_Device));
+
+ p_FmPort = (t_FmPort *)malloc(sizeof(t_FmPort));
+ if (!p_FmPort) {
+ free(p_Dev);
+ return NULL;
+ }
+ memset(p_FmPort, 0, sizeof(t_FmPort));
+ memset(devName, 0, sizeof(devName));
+ switch (p_FmPortParams->portType) {
+ case e_FM_PORT_TYPE_OH_OFFLINE_PARSING:
+ sprintf(devName, "%s%s%u-port-oh%d", "/dev/", DEV_FM_NAME,
+ (uint32_t)((t_Device *)p_FmPortParams->h_Fm)->id,
+ p_FmPortParams->portId);
+ break;
+ case e_FM_PORT_TYPE_RX:
+ sprintf(devName, "%s%s%u-port-rx%d", "/dev/", DEV_FM_NAME,
+ (uint32_t)((t_Device *)p_FmPortParams->h_Fm)->id,
+ p_FmPortParams->portId);
+ break;
+ case e_FM_PORT_TYPE_RX_10G:
+ sprintf(devName, "%s%s%u-port-rx%d", "/dev/", DEV_FM_NAME,
+ (uint32_t)((t_Device *)p_FmPortParams->h_Fm)->id,
+ FM_MAX_NUM_OF_1G_RX_PORTS + p_FmPortParams->portId);
+ break;
+ case e_FM_PORT_TYPE_TX:
+ sprintf(devName, "%s%s%u-port-tx%d", "/dev/", DEV_FM_NAME,
+ (uint32_t)((t_Device *)p_FmPortParams->h_Fm)->id,
+ p_FmPortParams->portId);
+ break;
+ case e_FM_PORT_TYPE_TX_10G:
+ sprintf(devName, "%s%s%u-port-tx%d", "/dev/", DEV_FM_NAME,
+ (uint32_t)((t_Device *)p_FmPortParams->h_Fm)->id,
+ FM_MAX_NUM_OF_1G_TX_PORTS + p_FmPortParams->portId);
+ break;
+ default:
+ free(p_FmPort);
+ free(p_Dev);
+ return NULL;
+ }
+
+ fd = open(devName, O_RDWR);
+ if (fd < 0) {
+ free(p_FmPort);
+ free(p_Dev);
+ return NULL;
+ }
+
+ p_FmPort->portType = p_FmPortParams->portType;
+ p_FmPort->portId = p_FmPortParams->portId;
+ p_Dev->id = p_FmPortParams->portId;
+ p_Dev->fd = fd;
+ p_Dev->h_UserPriv = (t_Handle)p_FmPort;
+
+ _fml_dbg("Finishing.\n");
+
+ return (t_Handle)p_Dev;
+}
+
+void FM_PORT_Close(t_Handle h_FmPort)
+{
+ t_Device *p_Dev = (t_Device *)h_FmPort;
+
+ _fml_dbg("Calling...\n");
+
+ close(p_Dev->fd);
+ if (p_Dev->h_UserPriv)
+ free(p_Dev->h_UserPriv);
+ free(p_Dev);
+
+ _fml_dbg("Finishing.\n");
+}
+
+uint32_t FM_PORT_Disable(t_Handle h_FmPort)
+{
+ t_Device *p_Dev = (t_Device *)h_FmPort;
+
+ _fml_dbg("Calling...\n");
+
+ if (ioctl(p_Dev->fd, FM_PORT_IOC_DISABLE))
+ RETURN_ERROR(MINOR, E_INVALID_OPERATION, NO_MSG);
+
+ _fml_dbg("Finishing.\n");
+
+ return E_OK;
+}
+
+uint32_t FM_PORT_Enable(t_Handle h_FmPort)
+{
+ t_Device *p_Dev = (t_Device *)h_FmPort;
+
+ _fml_dbg("Calling...\n");
+
+ if (ioctl(p_Dev->fd, FM_PORT_IOC_ENABLE))
+ RETURN_ERROR(MINOR, E_INVALID_OPERATION, NO_MSG);
+
+ _fml_dbg("Finishing.\n");
+
+ return E_OK;
+}
+
+uint32_t FM_PORT_SetPCD(t_Handle h_FmPort,
+ ioc_fm_port_pcd_params_t *params)
+{
+ t_Device *p_Dev = (t_Device *)h_FmPort;
+
+ _fml_dbg("Calling...\n");
+
+ /* correct h_NetEnv param from t_FmPortPcdParams */
+ DEV_TO_ID(params->net_env_id);
+
+ /* correct pcd structures according to what support was set */
+ if (params->pcd_support == e_IOC_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_CC ||
+ params->pcd_support == e_IOC_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_CC_AND_PLCR ||
+ params->pcd_support == e_IOC_FM_PORT_PCD_SUPPORT_PRS_AND_CC) {
+ if (params->p_cc_params && params->p_cc_params->cc_tree_id)
+ DEV_TO_ID(params->p_cc_params->cc_tree_id);
+ else
+ DPAA_PMD_WARN("Coarse Clasification not set !");
+ }
+
+ if (params->pcd_support == e_IOC_FM_PORT_PCD_SUPPORT_PRS_AND_KG ||
+ params->pcd_support == e_IOC_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_CC ||
+ params->pcd_support == e_IOC_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_CC_AND_PLCR ||
+ params->pcd_support == e_IOC_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_PLCR){
+ if (params->p_kg_params) {
+ uint32_t i;
+
+ for (i = 0; i < params->p_kg_params->num_of_schemes; i++)
+ if (params->p_kg_params->scheme_ids[i])
+ DEV_TO_ID(params->p_kg_params->scheme_ids[i]);
+ else
+ DPAA_PMD_WARN("Scheme:%u not set!!", i);
+
+ if (params->p_kg_params && params->p_kg_params->direct_scheme)
+ DEV_TO_ID(params->p_kg_params->direct_scheme_id);
+ } else {
+ DPAA_PMD_WARN("KeyGen not set !");
+ }
+ }
+
+ if (params->pcd_support == e_IOC_FM_PORT_PCD_SUPPORT_PLCR_ONLY ||
+ params->pcd_support == e_IOC_FM_PORT_PCD_SUPPORT_PRS_AND_PLCR ||
+ params->pcd_support == e_IOC_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_CC_AND_PLCR ||
+ params->pcd_support == e_IOC_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_PLCR) {
+ if (params->p_plcr_params) {
+ if (params->p_plcr_params->plcr_profile_id)
+ DEV_TO_ID(params->p_plcr_params->plcr_profile_id);
+ else
+ DPAA_PMD_WARN("Policer not set !");
+ }
+ }
+
+ if (params->p_ip_reassembly_manip)
+ DEV_TO_ID(params->p_ip_reassembly_manip);
+
+#if (DPAA_VERSION >= 11)
+ if (params->p_capwap_reassembly_manip)
+ DEV_TO_ID(params->p_capwap_reassembly_manip);
+#endif
+
+ if (ioctl(p_Dev->fd, FM_PORT_IOC_SET_PCD, params))
+ RETURN_ERROR(MINOR, E_INVALID_OPERATION, NO_MSG);
+
+ _fml_dbg("Finishing.\n");
+
+ return E_OK;
+}
+
+uint32_t FM_PORT_DeletePCD(t_Handle h_FmPort)
+{
+ t_Device *p_Dev = (t_Device *)h_FmPort;
+
+ _fml_dbg("Calling...\n");
+
+ if (ioctl(p_Dev->fd, FM_PORT_IOC_DELETE_PCD))
+ RETURN_ERROR(MINOR, E_INVALID_OPERATION, NO_MSG);
+
+ _fml_dbg("Finishing.\n");
+
+ return E_OK;
+}
+
+t_Handle CreateDevice(t_Handle h_UserPriv, t_Handle h_DevId)
+{
+ t_Device *p_UserPrivDev = (t_Device *)h_UserPriv;
+ t_Device *p_Dev = NULL;
+
+ _fml_dbg("Calling...\n");
+
+ p_Dev = (t_Device *)malloc(sizeof(t_Device));
+ if (!p_Dev)
+ return NULL;
+
+ memset(p_Dev, 0, sizeof(t_Device));
+ p_Dev->h_UserPriv = h_UserPriv;
+ p_UserPrivDev->owners++;
+ p_Dev->id = PTR_TO_UINT(h_DevId);
+
+ _fml_dbg("Finishing.\n");
+
+ return (t_Handle)p_Dev;
+}
+
+t_Handle GetDeviceId(t_Handle h_Dev)
+{
+ t_Device *p_Dev = (t_Device *)h_Dev;
+
+ return (t_Handle)p_Dev->id;
+}
+
+#if defined FMAN_V3H
+void Platform_is_FMAN_V3H(void)
+{
+}
+#elif defined FMAN_V3L
+void Platform_is_FMAN_V3L(void)
+{
+}
+#endif
new file mode 100644
@@ -0,0 +1,5190 @@
+/* SPDX-License-Identifier: (BSD-3-Clause OR GPL-2.0)
+ * Copyright 2008-2012 Freescale Semiconductor Inc.
+ * Copyright 2017-2020 NXP
+ */
+
+#ifndef __FM_PCD_EXT_H
+#define __FM_PCD_EXT_H
+
+#include "ncsw_ext.h"
+#include "net_ext.h"
+#include "fm_ext.h"
+
+/**
+ @Description FM PCD ...
+ @Group lnx_ioctl_FM_grp Frame Manager Linux IOCTL API
+ @Description Frame Manager Linux ioctls definitions and enums
+ @{
+*/
+
+/**
+ @Group lnx_ioctl_FM_PCD_grp FM PCD
+ @Description Frame Manager PCD API functions, definitions and enums
+
+ The FM PCD module is responsible for the initialization of all
+ global classifying FM modules. This includes the parser general and
+ common registers, the key generator global and common registers,
+ and the policer global and common registers.
+ In addition, the FM PCD SW module will initialize all required
+ key generator schemes, coarse classification flows, and policer
+ profiles. When an FM module is configured to work with one of these
+ entities, it will register to it using the FM PORT API. The PCD
+ module will manage the PCD resources - i.e. resource management of
+ KeyGen schemes, etc.
+
+ @{
+*/
+
+/**
+ @Collection General PCD defines
+*/
+#define IOC_FM_PCD_MAX_NUM_OF_PRIVATE_HDRS 2
+/**< Number of units/headers saved for user */
+
+#define IOC_FM_PCD_PRS_NUM_OF_HDRS 16
+/**< Number of headers supported by HW parser */
+#define IOC_FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS (32 - IOC_FM_PCD_MAX_NUM_OF_PRIVATE_HDRS)
+/**< Number of distinction units is limited by register size (32 bits) minus
+reserved bits for private headers. */
+#define IOC_FM_PCD_MAX_NUM_OF_INTERCHANGEABLE_HDRS 4
+/**< Maximum number of interchangeable headers in a distinction unit */
+#define IOC_FM_PCD_KG_NUM_OF_GENERIC_REGS 8
+/**< Total number of generic KeyGen registers */
+#define IOC_FM_PCD_KG_MAX_NUM_OF_EXTRACTS_PER_KEY 35
+/**< Max number allowed on any configuration; For HW implementation reasons,
+in most cases less than this will be allowed; The driver will return an
+initialization error if resource is unavailable. */
+#define IOC_FM_PCD_KG_NUM_OF_EXTRACT_MASKS 4
+/**< Total number of masks allowed on KeyGen extractions. */
+#define IOC_FM_PCD_KG_NUM_OF_DEFAULT_GROUPS 16
+/**< Number of default value logical groups */
+#define IOC_FM_PCD_PRS_NUM_OF_LABELS 32
+/**< Maximum number of SW parser labels */
+#define IOC_FM_PCD_SW_PRS_SIZE 0x00000800
+/**< Total size of SW parser area */
+
+#define IOC_FM_PCD_MAX_MANIP_INSRT_TEMPLATE_SIZE 128
+/**< Maximum size of insertion template for insert manipulation */
+
+#define IOC_FM_PCD_FRM_REPLIC_MAX_NUM_OF_ENTRIES 64
+/**< Maximum possible entries for frame replicator group */
+/* @} */
+
+#ifdef FM_CAPWAP_SUPPORT
+#error "FM_CAPWAP_SUPPORT not implemented!"
+#endif
+
+/**
+ @Group lnx_ioctl_FM_PCD_init_grp FM PCD Initialization Unit
+
+ @Description Frame Manager PCD Initialization Unit API
+
+ @{
+*/
+
+/**
+ @Description PCD counters
+ (must match enum ioc_fm_pcd_counters defined in fm_pcd_ext.h)
+*/
+typedef enum ioc_fm_pcd_counters {
+ e_IOC_FM_PCD_KG_COUNTERS_TOTAL, /**< KeyGen counter */
+ e_IOC_FM_PCD_PLCR_COUNTERS_RED,
+ /**< Policer counter - counts the total number of RED packets that exit the Policer. */
+ e_IOC_FM_PCD_PLCR_COUNTERS_YELLOW,
+ /**< Policer counter - counts the total number of YELLOW packets that exit the Policer. */
+ e_IOC_FM_PCD_PLCR_COUNTERS_RECOLORED_TO_RED,
+ /**< Policer counter - counts the number of packets that changed color to RED by the Policer;
+ This is a subset of e_IOC_FM_PCD_PLCR_COUNTERS_RED packet count, indicating active color changes. */
+ e_IOC_FM_PCD_PLCR_COUNTERS_RECOLORED_TO_YELLOW,
+ /**< Policer counter - counts the number of packets that changed color to YELLOW by the Policer;
+ This is a subset of e_IOC_FM_PCD_PLCR_COUNTERS_YELLOW packet count, indicating active color changes. */
+ e_IOC_FM_PCD_PLCR_COUNTERS_TOTAL,
+ /**< Policer counter - counts the total number of packets passed in the Policer. */
+ e_IOC_FM_PCD_PLCR_COUNTERS_LENGTH_MISMATCH,
+ /**< Policer counter - counts the number of packets with length mismatch. */
+ e_IOC_FM_PCD_PRS_COUNTERS_PARSE_DISPATCH,
+ /**< Parser counter - counts the number of times the parser block is dispatched. */
+ e_IOC_FM_PCD_PRS_COUNTERS_L2_PARSE_RESULT_RETURNED,
+ /**< Parser counter - counts the number of times L2 parse result is returned (including errors). */
+ e_IOC_FM_PCD_PRS_COUNTERS_L3_PARSE_RESULT_RETURNED,
+ /**< Parser counter - counts the number of times L3 parse result is returned (including errors). */
+ e_IOC_FM_PCD_PRS_COUNTERS_L4_PARSE_RESULT_RETURNED,
+ /**< Parser counter - counts the number of times L4 parse result is returned (including errors). */
+ e_IOC_FM_PCD_PRS_COUNTERS_SHIM_PARSE_RESULT_RETURNED,
+ /**< Parser counter - counts the number of times SHIM parse result is returned (including errors). */
+ e_IOC_FM_PCD_PRS_COUNTERS_L2_PARSE_RESULT_RETURNED_WITH_ERR,
+ /**< Parser counter - counts the number of times L2 parse result is returned with errors. */
+ e_IOC_FM_PCD_PRS_COUNTERS_L3_PARSE_RESULT_RETURNED_WITH_ERR,
+ /**< Parser counter - counts the number of times L3 parse result is returned with errors. */
+ e_IOC_FM_PCD_PRS_COUNTERS_L4_PARSE_RESULT_RETURNED_WITH_ERR,
+ /**< Parser counter - counts the number of times L4 parse result is returned with errors. */
+ e_IOC_FM_PCD_PRS_COUNTERS_SHIM_PARSE_RESULT_RETURNED_WITH_ERR,
+ /**< Parser counter - counts the number of times SHIM parse result is returned with errors. */
+ e_IOC_FM_PCD_PRS_COUNTERS_SOFT_PRS_CYCLES,
+ /**< Parser counter - counts the number of cycles spent executing soft parser instruction (including stall cycles). */
+ e_IOC_FM_PCD_PRS_COUNTERS_SOFT_PRS_STALL_CYCLES,
+ /**< Parser counter - counts the number of cycles stalled waiting for parser internal memory reads while executing soft parser instruction. */
+ e_IOC_FM_PCD_PRS_COUNTERS_HARD_PRS_CYCLE_INCL_STALL_CYCLES,
+ /**< Parser counter - counts the number of cycles spent executing hard parser (including stall cycles). */
+ e_IOC_FM_PCD_PRS_COUNTERS_MURAM_READ_CYCLES,
+ /**< MURAM counter - counts the number of cycles while performing FMan Memory read. */
+ e_IOC_FM_PCD_PRS_COUNTERS_MURAM_READ_STALL_CYCLES,
+ /**< MURAM counter - counts the number of cycles stalled while performing FMan Memory read. */
+ e_IOC_FM_PCD_PRS_COUNTERS_MURAM_WRITE_CYCLES,
+ /**< MURAM counter - counts the number of cycles while performing FMan Memory write. */
+ e_IOC_FM_PCD_PRS_COUNTERS_MURAM_WRITE_STALL_CYCLES,
+ /**< MURAM counter - counts the number of cycles stalled while performing FMan Memory write. */
+ e_IOC_FM_PCD_PRS_COUNTERS_FPM_COMMAND_STALL_CYCLES
+ /**< FPM counter - counts the number of cycles stalled while performing a FPM Command. */
+} ioc_fm_pcd_counters;
+
+/**
+ @Description PCD interrupts
+ (must match enum ioc_fm_pcd_exceptions defined in fm_pcd_ext.h)
+*/
+typedef enum ioc_fm_pcd_exceptions {
+ e_IOC_FM_PCD_KG_EXCEPTION_DOUBLE_ECC,
+ /**< KeyGen double-bit ECC error is detected on internal memory read access. */
+ e_IOC_FM_PCD_KG_EXCEPTION_KEYSIZE_OVERFLOW,
+ /**< KeyGen scheme configuration error indicating a key size larger than 56 bytes. */
+ e_IOC_FM_PCD_PLCR_EXCEPTION_DOUBLE_ECC,
+ /**< Policer double-bit ECC error has been detected on PRAM read access. */
+ e_IOC_FM_PCD_PLCR_EXCEPTION_INIT_ENTRY_ERROR,
+ /**< Policer access to a non-initialized profile has been detected. */
+ e_IOC_FM_PCD_PLCR_EXCEPTION_PRAM_SELF_INIT_COMPLETE,
+ /**< Policer RAM self-initialization complete */
+ e_IOC_FM_PCD_PLCR_EXCEPTION_ATOMIC_ACTION_COMPLETE,
+ /**< Policer atomic action complete */
+ e_IOC_FM_PCD_PRS_EXCEPTION_DOUBLE_ECC,
+ /**< Parser double-bit ECC error */
+ e_IOC_FM_PCD_PRS_EXCEPTION_SINGLE_ECC
+ /**< Parser single-bit ECC error */
+} ioc_fm_pcd_exceptions;
+
+/** @} */ /* end of lnx_ioctl_FM_PCD_init_grp group */
+
+/**
+ @Group lnx_ioctl_FM_PCD_Runtime_grp FM PCD Runtime Unit
+
+ @Description Frame Manager PCD Runtime Unit
+
+ The runtime control allows creation of PCD infrastructure modules
+ such as Network Environment Characteristics, Classification Plan
+ Groups and Coarse Classification Trees.
+ It also allows on-the-fly initialization, modification and removal
+ of PCD modules such as KeyGen schemes, coarse classification nodes
+ and Policer profiles.
+
+In order to explain the programming model of the PCD driver interface
+a few terms should be explained, and will be used below.
+- Distinction Header - One of the 16 protocols supported by the FM parser,
+ or one of the SHIM headers (1 or 2). May be a header with a special
+ option (see below).
+- Interchangeable Headers Group - This is a group of Headers recognized
+ by either one of them. For example, if in a specific context the user
+ chooses to treat IPv4 and IPV6 in the same way, they may create an
+ interchangeable Headers Unit consisting of these 2 headers.
+- A Distinction Unit - a Distinction Header or an Interchangeable Headers
+ Group.
+- Header with special option - applies to Ethernet, MPLS, VLAN, IPv4 and
+ IPv6, includes multicast, broadcast and other protocol specific options.
+ In terms of hardware it relates to the options available in the
+ classification plan.
+- Network Environment Characteristics - a set of Distinction Units that define
+ the total recognizable header selection for a certain environment. This
+ is NOT the list of all headers that will ever appear in a flow, but
+ rather everything that needs distinction in a flow, where distinction is
+ made by KeyGen schemes and coarse classification action descriptors.
+
+The PCD runtime modules initialization is done in stages. The first stage after
+initializing the PCD module itself is to establish a Network Flows Environment
+Definition. The application may choose to establish one or more such
+environments. Later, when needed, the application will have to state, for some
+of its modules, to which single environment it belongs.
+
+ @{
+*/
+
+/**
+ @Description structure for FM counters
+*/
+typedef struct ioc_fm_pcd_counters_params_t {
+ ioc_fm_pcd_counters cnt; /**< The requested counter */
+ uint32_t val;/**< The requested value to get/set from/into the counter */
+} ioc_fm_pcd_counters_params_t;
+
+/**
+ @Description structure for FM exception definitios
+*/
+typedef struct ioc_fm_pcd_exception_params_t {
+ ioc_fm_pcd_exceptions exception; /**< The requested exception */
+ bool enable; /**< TRUE to enable interrupt, FALSE to mask it. */
+} ioc_fm_pcd_exception_params_t;
+
+/**
+ @Description A structure for SW parser labels
+ (must be identical to struct t_FmPcdPrsLabelParams defined in fm_pcd_ext.h)
+ */
+typedef struct ioc_fm_pcd_prs_label_params_t {
+ uint32_t instruction_offset;/**< SW parser label instruction offset (2 bytes
+ resolution), relative to Parser RAM. */
+ ioc_net_header_type hdr;/**< The existence of this header will invoke
+ the SW parser code. */
+ uint8_t index_per_hdr; /**< Normally 0, if more than one SW parser
+ attachments for the same header, use this
+ index to distinguish between them. */
+} ioc_fm_pcd_prs_label_params_t;
+
+/**
+ @Description A structure for SW parser
+ (Must match struct ioc_fm_pcd_prs_sw_params_t defined in fm_pcd_ext.h)
+ */
+typedef struct ioc_fm_pcd_prs_sw_params_t {
+ bool override; /**< FALSE to invoke a check that nothing else
+ was loaded to this address, including
+ internal patches.
+ TRUE to override any existing code.*/
+ uint32_t size; /**< SW parser code size */
+ uint16_t base; /**< SW parser base (in instruction counts!
+ must be larger than 0x20)*/
+ uint8_t *p_code; /**< SW parser code */
+ uint32_t sw_prs_data_params[IOC_FM_PCD_PRS_NUM_OF_HDRS];
+ /**< SW parser data (parameters) */
+ uint8_t num_of_labels; /**< Number of labels for SW parser. */
+ ioc_fm_pcd_prs_label_params_t labels_table[IOC_FM_PCD_PRS_NUM_OF_LABELS];
+ /**< SW parser labels table, containing num_of_labels entries */
+} ioc_fm_pcd_prs_sw_params_t;
+
+/**
+ @Description A structure to set the a KeyGen default value
+ */
+typedef struct ioc_fm_pcd_kg_dflt_value_params_t {
+ uint8_t valueId;/**< 0,1 - one of 2 global default values */
+ uint32_t value; /**< The requested default value */
+} ioc_fm_pcd_kg_dflt_value_params_t;
+
+/**
+ @Function FM_PCD_Enable
+
+ @Description This routine should be called after PCD is initialized for
+ enabling all PCD engines according to their existing configuration.
+
+ @Return 0 on success; Error code otherwise.
+
+ @Cautions Allowed only when PCD is disabled.
+*/
+#define FM_PCD_IOC_ENABLE _IO(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(1))
+
+/**
+ @Function FM_PCD_Disable
+
+ @Description This routine may be called when PCD is enabled in order to
+ disable all PCD engines. It may be called
+ only when none of the ports in the system are using the PCD.
+
+ @Return 0 on success; Error code otherwise.
+
+ @Cautions Allowed only when PCD is enabled.
+*/
+#define FM_PCD_IOC_DISABLE _IO(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(2))
+
+ /**
+ @Function FM_PCD_PrsLoadSw
+
+ @Description This routine may be called only when all ports in the
+ system are actively using the classification plan scheme.
+ In such cases it is recommended in order to save resources.
+ The driver automatically saves 8 classification plans for
+ ports that do NOT use the classification plan mechanism, to
+ avoid this (in order to save those entries) this routine may
+ be called.
+
+ @Param[in] ioc_fm_pcd_prs_sw_params_t
+ A pointer to the image of the software parser code.
+
+ @Return 0 on success; Error code otherwise.
+
+ @Cautions Allowed only when PCD is disabled.
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_PRS_LOAD_SW_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(3), ioc_compat_fm_pcd_prs_sw_params_t)
+#endif
+#define FM_PCD_IOC_PRS_LOAD_SW _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(3), ioc_fm_pcd_prs_sw_params_t)
+
+/**
+ @Function FM_PCD_KgSetDfltValue
+
+ @Description Calling this routine sets a global default value to be used
+ by the KeyGen when parser does not recognize a required
+ field/header.
+ By default default values are 0.
+
+ @Param[in] ioc_fm_pcd_kg_dflt_value_params_t A pointer to a structure with the relevant parameters
+
+ @Return 0 on success; Error code otherwise.
+
+ @Cautions Allowed only when PCD is disabled.
+*/
+#define FM_PCD_IOC_KG_SET_DFLT_VALUE _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(6), ioc_fm_pcd_kg_dflt_value_params_t)
+
+/**
+ @Function FM_PCD_KgSetAdditionalDataAfterParsing
+
+ @Description Calling this routine allows the keygen to access data past
+ the parser finishing point.
+
+ @Param[in] uint8_t payload-offset; the number of bytes beyond the parser location.
+
+ @Return 0 on success; Error code otherwise.
+
+ @Cautions Allowed only when PCD is disabled.
+*/
+#define FM_PCD_IOC_KG_SET_ADDITIONAL_DATA_AFTER_PARSING _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(7), uint8_t)
+
+/**
+ @Function FM_PCD_SetException
+
+ @Description Calling this routine enables/disables PCD interrupts.
+
+ @Param[in] ioc_fm_pcd_exception_params_t
+ Arguments struct with exception to be enabled/disabled.
+
+ @Return 0 on success; Error code otherwise.
+*/
+#define FM_PCD_IOC_SET_EXCEPTION _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(8), ioc_fm_pcd_exception_params_t)
+
+/**
+ @Function FM_PCD_GetCounter
+
+ @Description Reads one of the FM PCD counters.
+
+ @Param[in,out] ioc_fm_pcd_counters_params_t The requested counter parameters.
+
+ @Return 0 on success; Error code otherwise.
+
+ @Cautions Note that it is user's responsibilty to call this routine only
+ for enabled counters, and there will be no indication if a
+ disabled counter is accessed.
+*/
+#define FM_PCD_IOC_GET_COUNTER _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(9), ioc_fm_pcd_counters_params_t)
+
+/**
+
+ @Function FM_PCD_KgSchemeGetCounter
+
+ @Description Reads scheme packet counter.
+
+ @Param[in] h_Scheme scheme handle as returned by FM_PCD_KgSchemeSet().
+
+ @Return Counter's current value.
+
+ @Cautions Allowed only following FM_PCD_Init() & FM_PCD_KgSchemeSet().
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_KG_SCHEME_GET_CNTR_COMPAT _IOR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(4), ioc_compat_fm_pcd_kg_scheme_spc_t)
+#endif
+#define FM_PCD_IOC_KG_SCHEME_GET_CNTR _IOR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(4), ioc_fm_pcd_kg_scheme_spc_t)
+
+/**
+ @Function FM_PCD_ForceIntr
+
+ @Description Causes an interrupt event on the requested source.
+
+ @Param[in] ioc_fm_pcd_exceptions - An exception to be forced.
+
+ @Return 0 on success; error code if the exception is not enabled,
+ or is not able to create interrupt.
+*/
+#define FM_PCD_IOC_FORCE_INTR _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(11), ioc_fm_pcd_exceptions)
+
+/**
+ @Collection Definitions of coarse classification parameters as required by KeyGen
+ (when coarse classification is the next engine after this scheme).
+*/
+#define IOC_FM_PCD_MAX_NUM_OF_CC_TREES 8
+#define IOC_FM_PCD_MAX_NUM_OF_CC_GROUPS 16
+#define IOC_FM_PCD_MAX_NUM_OF_CC_UNITS 4
+#define IOC_FM_PCD_MAX_NUM_OF_KEYS 256
+#define IOC_FM_PCD_MAX_NUM_OF_FLOWS (4 * KILOBYTE)
+#define IOC_FM_PCD_MAX_SIZE_OF_KEY 56
+#define IOC_FM_PCD_MAX_NUM_OF_CC_ENTRIES_IN_GRP 16
+#define IOC_FM_PCD_LAST_KEY_INDEX 0xffff
+#define IOC_FM_PCD_MANIP_DSCP_VALUES 64
+/* @} */
+
+/**
+ @Collection A set of definitions to allow protocol
+ special option description.
+*/
+typedef uint32_t ioc_protocol_opt_t;
+ /**< A general type to define a protocol option. */
+
+typedef ioc_protocol_opt_t ioc_eth_protocol_opt_t;
+ /**< Ethernet protocol options. */
+#define IOC_ETH_BROADCAST 0x80000000 /**< Ethernet Broadcast. */
+#define IOC_ETH_MULTICAST 0x40000000 /**< Ethernet Multicast. */
+
+typedef ioc_protocol_opt_t ioc_vlan_protocol_opt_t;
+ /**< Vlan protocol options. */
+#define IOC_VLAN_STACKED 0x20000000 /**< Stacked VLAN. */
+
+typedef ioc_protocol_opt_t ioc_mpls_protocol_opt_t;
+ /**< MPLS protocol options. */
+#define IOC_MPLS_STACKED 0x10000000 /**< Stacked MPLS. */
+
+typedef ioc_protocol_opt_t ioc_ipv4_protocol_opt_t;
+ /**< IPv4 protocol options. */
+#define IOC_IPV4_BROADCAST_1 0x08000000 /**< IPv4 Broadcast. */
+#define IOC_IPV4_MULTICAST_1 0x04000000 /**< IPv4 Multicast. */
+#define IOC_IPV4_UNICAST_2 0x02000000 /**< Tunneled IPv4 - Unicast. */
+#define IOC_IPV4_MULTICAST_BROADCAST_2 0x01000000
+ /**< Tunneled IPv4 - Broadcast/Multicast. */
+
+#define IOC_IPV4_FRAG_1 0x00000008 /**< IPV4 reassembly option.
+ IPV4 Reassembly manipulation requires network
+ environment with IPV4 header and IPV4_FRAG_1 option */
+
+typedef ioc_protocol_opt_t ioc_ipv6_protocol_opt_t;
+ /**< IPv6 protocol options. */
+#define IOC_IPV6_MULTICAST_1 0x00800000 /**< IPv6 Multicast. */
+#define IOC_IPV6_UNICAST_2 0x00400000
+ /**< Tunneled IPv6 - Unicast. */
+#define IOC_IPV6_MULTICAST_2 0x00200000
+ /**< Tunneled IPv6 - Multicast. */
+
+#define IOC_IPV6_FRAG_1 0x00000004 /**< IPV6 reassembly option.
+ IPV6 Reassembly manipulation requires network
+ environment with IPV6 header and IPV6_FRAG_1 option */
+#if (DPAA_VERSION >= 11)
+typedef ioc_protocol_opt_t ioc_capwap_protocol_opt_t;
+ /**< CAPWAP protocol options. */
+#define CAPWAP_FRAG_1 0x00000008 /**< CAPWAP reassembly option.
+ CAPWAP Reassembly manipulation requires network
+ environment with CAPWAP header and CAPWAP_FRAG_1 option;
+ in case where fragment found, the fragment-extension offset
+ may be found at 'shim2' (in parser-result). */
+#endif /* (DPAA_VERSION >= 11) */
+
+/* @} */
+
+#define IOC_FM_PCD_MANIP_MAX_HDR_SIZE 256
+#define IOC_FM_PCD_MANIP_DSCP_TO_VLAN_TRANS 64
+/**
+ @Collection A set of definitions to support Header Manipulation selection.
+*/
+typedef uint32_t ioc_hdr_manip_flags_t;
+ /**< A general type to define a HMan update command flags. */
+
+typedef ioc_hdr_manip_flags_t ioc_ipv4_hdr_manip_update_flags_t;
+ /**< IPv4 protocol HMan update command flags. */
+
+#define IOC_HDR_MANIP_IPV4_TOS 0x80000000
+ /**< update TOS with the given value ('tos' field
+ of ioc_fm_pcd_manip_hdr_field_update_ipv4_t) */
+#define IOC_HDR_MANIP_IPV4_ID 0x40000000
+ /**< update IP ID with the given value ('id' field
+ of ioc_fm_pcd_manip_hdr_field_update_ipv4_t) */
+#define IOC_HDR_MANIP_IPV4_TTL 0x20000000 /**< Decrement TTL by 1 */
+#define IOC_HDR_MANIP_IPV4_SRC 0x10000000
+ /**< update IP source address with the given value
+ ('src' field of ioc_fm_pcd_manip_hdr_field_update_ipv4_t) */
+#define IOC_HDR_MANIP_IPV4_DST 0x08000000
+ /**< update IP destination address with the given value
+ ('dst' field of ioc_fm_pcd_manip_hdr_field_update_ipv4_t) */
+
+typedef ioc_hdr_manip_flags_t ioc_ipv6_hdr_manip_update_flags_t;
+ /**< IPv6 protocol HMan update command flags. */
+
+#define IOC_HDR_MANIP_IPV6_TC 0x80000000
+ /**< update Traffic Class address with the given value
+ ('traffic_class' field of ioc_fm_pcd_manip_hdr_field_update_ipv6_t) */
+#define IOC_HDR_MANIP_IPV6_HL 0x40000000 /**< Decrement Hop Limit by 1 */
+#define IOC_HDR_MANIP_IPV6_SRC 0x20000000
+ /**< update IP source address with the given value
+ ('src' field of ioc_fm_pcd_manip_hdr_field_update_ipv6_t) */
+#define IOC_HDR_MANIP_IPV6_DST 0x10000000
+ /**< update IP destination address with the given value
+ ('dst' field of ioc_fm_pcd_manip_hdr_field_update_ipv6_t) */
+
+typedef ioc_hdr_manip_flags_t ioc_tcp_udp_hdr_manip_update_flags_t;
+ /**< TCP/UDP protocol HMan update command flags. */
+
+#define IOC_HDR_MANIP_TCP_UDP_SRC 0x80000000
+ /**< update TCP/UDP source address with the given value
+ ('src' field of ioc_fm_pcd_manip_hdr_field_update_tcp_udp_t) */
+#define IOC_HDR_MANIP_TCP_UDP_DST 0x40000000
+ /**< update TCP/UDP destination address with the given value
+ ('dst' field of ioc_fm_pcd_manip_hdr_field_update_tcp_udp_t) */
+#define IOC_HDR_MANIP_TCP_UDP_CHECKSUM 0x20000000
+ /**< update TCP/UDP checksum */
+
+/* @} */
+
+/**
+ @Description A type used for returning the order of the key extraction.
+ each value in this array represents the index of the extraction
+ command as defined by the user in the initialization extraction
+ array. The valid size of this array is the user define number of
+ extractions required (also marked by the second '0' in this array).
+*/
+typedef uint8_t ioc_fm_pcd_kg_key_order_t [IOC_FM_PCD_KG_MAX_NUM_OF_EXTRACTS_PER_KEY];
+
+/**
+ @Description All PCD engines
+ (must match enum e_FmPcdEngine defined in fm_pcd_ext.h)
+*/
+typedef enum ioc_fm_pcd_engine {
+ e_IOC_FM_PCD_INVALID = 0, /**< Invalid PCD engine */
+ e_IOC_FM_PCD_DONE, /**< No PCD Engine indicated */
+ e_IOC_FM_PCD_KG, /**< KeyGen */
+ e_IOC_FM_PCD_CC, /**< Coarse Classifier */
+ e_IOC_FM_PCD_PLCR, /**< Policer */
+ e_IOC_FM_PCD_PRS, /**< Parser */
+#if DPAA_VERSION >= 11
+ e_IOC_FM_PCD_FR, /**< Frame Replicator */
+#endif /* DPAA_VERSION >= 11 */
+ e_IOC_FM_PCD_HASH /**< Hash Table */
+} ioc_fm_pcd_engine;
+
+/**
+ @Description An enum for selecting extraction by header types
+ (Must match enum e_FmPcdExtractByHdrType defined in fm_pcd_ext.h)
+*/
+typedef enum ioc_fm_pcd_extract_by_hdr_type {
+ e_IOC_FM_PCD_EXTRACT_FROM_HDR, /**< Extract bytes from header */
+ e_IOC_FM_PCD_EXTRACT_FROM_FIELD,/**< Extract bytes from header field */
+ e_IOC_FM_PCD_EXTRACT_FULL_FIELD /**< Extract a full field */
+} ioc_fm_pcd_extract_by_hdr_type;
+
+/**
+ @Description An enum for selecting extraction source (when it is not the header)
+ (Must match enum e_FmPcdExtractFrom defined in fm_pcd_ext.h)
+*/
+typedef enum ioc_fm_pcd_extract_from {
+ e_IOC_FM_PCD_EXTRACT_FROM_FRAME_START,
+ /**< KG & CC: Extract from beginning of frame */
+ e_IOC_FM_PCD_EXTRACT_FROM_DFLT_VALUE,
+ /**< KG only: Extract from a default value */
+ e_IOC_FM_PCD_EXTRACT_FROM_CURR_END_OF_PARSE,
+ /**< KG only: Extract from the point where parsing had finished */
+ e_IOC_FM_PCD_EXTRACT_FROM_KEY, /**< CC only: Field where saved KEY */
+ e_IOC_FM_PCD_EXTRACT_FROM_HASH, /**< CC only: Field where saved HASH */
+ e_IOC_FM_PCD_EXTRACT_FROM_PARSE_RESULT,
+ /**< KG & CC: Extract from the parser result */
+ e_IOC_FM_PCD_EXTRACT_FROM_ENQ_FQID,
+ /**< KG & CC: Extract from enqueue FQID */
+ e_IOC_FM_PCD_EXTRACT_FROM_FLOW_ID
+ /**< CC only: Field where saved Dequeue FQID */
+} ioc_fm_pcd_extract_from;
+
+/**
+ @Description An enum for selecting extraction type
+*/
+typedef enum ioc_fm_pcd_extract_type {
+ e_IOC_FM_PCD_EXTRACT_BY_HDR, /**< Extract according to header */
+ e_IOC_FM_PCD_EXTRACT_NON_HDR, /**< Extract from data that is not the header */
+ e_IOC_FM_PCD_KG_EXTRACT_PORT_PRIVATE_INFO
+ /**< Extract private info as specified by user */
+} ioc_fm_pcd_extract_type;
+
+/**
+ @Description An enum for selecting a default
+*/
+typedef enum ioc_fm_pcd_kg_extract_dflt_select {
+ e_IOC_FM_PCD_KG_DFLT_GBL_0, /**< Default selection is KG register 0 */
+ e_IOC_FM_PCD_KG_DFLT_GBL_1, /**< Default selection is KG register 1 */
+ e_IOC_FM_PCD_KG_DFLT_PRIVATE_0, /**< Default selection is a per scheme register 0 */
+ e_IOC_FM_PCD_KG_DFLT_PRIVATE_1, /**< Default selection is a per scheme register 1 */
+ e_IOC_FM_PCD_KG_DFLT_ILLEGAL /**< Illegal selection */
+} ioc_fm_pcd_kg_extract_dflt_select;
+
+/**
+ @Description Enumeration type defining all default groups - each group shares
+ a default value, one of four user-initialized values.
+*/
+typedef enum ioc_fm_pcd_kg_known_fields_dflt_types {
+ e_IOC_FM_PCD_KG_MAC_ADDR, /**< MAC Address */
+ e_IOC_FM_PCD_KG_TCI, /**< TCI field */
+ e_IOC_FM_PCD_KG_ENET_TYPE, /**< ENET Type */
+ e_IOC_FM_PCD_KG_PPP_SESSION_ID, /**< PPP Session id */
+ e_IOC_FM_PCD_KG_PPP_PROTOCOL_ID, /**< PPP Protocol id */
+ e_IOC_FM_PCD_KG_MPLS_LABEL, /**< MPLS label */
+ e_IOC_FM_PCD_KG_IP_ADDR, /**< IP addr */
+ e_IOC_FM_PCD_KG_PROTOCOL_TYPE, /**< Protocol type */
+ e_IOC_FM_PCD_KG_IP_TOS_TC, /**< TOS or TC */
+ e_IOC_FM_PCD_KG_IPV6_FLOW_LABEL, /**< IPV6 flow label */
+ e_IOC_FM_PCD_KG_IPSEC_SPI, /**< IPSEC SPI */
+ e_IOC_FM_PCD_KG_L4_PORT, /**< L4 Port */
+ e_IOC_FM_PCD_KG_TCP_FLAG, /**< TCP Flag */
+ e_IOC_FM_PCD_KG_GENERIC_FROM_DATA, /**< grouping implemented by SW,
+ any data extraction that is not the full
+ field described above */
+ e_IOC_FM_PCD_KG_GENERIC_FROM_DATA_NO_V, /**< grouping implemented by SW,
+ any data extraction without validation */
+ e_IOC_FM_PCD_KG_GENERIC_NOT_FROM_DATA /**< grouping implemented by SW,
+ extraction from parser result or
+ direct use of default value */
+} ioc_fm_pcd_kg_known_fields_dflt_types;
+
+/**
+ @Description Enumeration type for defining header index for scenarios with
+ multiple (tunneled) headers
+*/
+typedef enum ioc_fm_pcd_hdr_index {
+ e_IOC_FM_PCD_HDR_INDEX_NONE = 0,
+ /**< used when multiple headers not used, also
+ to specify regular IP (not tunneled). */
+ e_IOC_FM_PCD_HDR_INDEX_1,/**< may be used for VLAN, MPLS, tunneled IP */
+ e_IOC_FM_PCD_HDR_INDEX_2,/**< may be used for MPLS, tunneled IP */
+ e_IOC_FM_PCD_HDR_INDEX_3,/**< may be used for MPLS */
+ e_IOC_FM_PCD_HDR_INDEX_LAST = 0xFF /**< may be used for VLAN, MPLS */
+} ioc_fm_pcd_hdr_index;
+
+/**
+ @Description Enumeration type for selecting the policer profile functional type
+*/
+typedef enum ioc_fm_pcd_profile_type_selection {
+ e_IOC_FM_PCD_PLCR_PORT_PRIVATE, /**< Port dedicated profile */
+ e_IOC_FM_PCD_PLCR_SHARED /**< Shared profile (shared within partition) */
+} ioc_fm_pcd_profile_type_selection;
+
+/**
+ @Description Enumeration type for selecting the policer profile algorithm
+*/
+typedef enum ioc_fm_pcd_plcr_algorithm_selection {
+ e_IOC_FM_PCD_PLCR_PASS_THROUGH, /**< Policer pass through */
+ e_IOC_FM_PCD_PLCR_RFC_2698, /**< Policer algorithm RFC 2698 */
+ e_IOC_FM_PCD_PLCR_RFC_4115 /**< Policer algorithm RFC 4115 */
+} ioc_fm_pcd_plcr_algorithm_selection;
+
+/**
+ @Description Enumeration type for selecting a policer profile color mode
+*/
+typedef enum ioc_fm_pcd_plcr_color_mode {
+ e_IOC_FM_PCD_PLCR_COLOR_BLIND, /**< Color blind */
+ e_IOC_FM_PCD_PLCR_COLOR_AWARE /**< Color aware */
+} ioc_fm_pcd_plcr_color_mode;
+
+/**
+ @Description Enumeration type for selecting a policer profile color
+*/
+typedef enum ioc_fm_pcd_plcr_color {
+ e_IOC_FM_PCD_PLCR_GREEN, /**< Green */
+ e_IOC_FM_PCD_PLCR_YELLOW, /**< Yellow */
+ e_IOC_FM_PCD_PLCR_RED, /**< Red */
+ e_IOC_FM_PCD_PLCR_OVERRIDE /**< Color override */
+} ioc_fm_pcd_plcr_color;
+
+/**
+ @Description Enumeration type for selecting the policer profile packet frame length selector
+*/
+typedef enum ioc_fm_pcd_plcr_frame_length_select {
+ e_IOC_FM_PCD_PLCR_L2_FRM_LEN, /**< L2 frame length */
+ e_IOC_FM_PCD_PLCR_L3_FRM_LEN, /**< L3 frame length */
+ e_IOC_FM_PCD_PLCR_L4_FRM_LEN, /**< L4 frame length */
+ e_IOC_FM_PCD_PLCR_FULL_FRM_LEN /**< Full frame length */
+} ioc_fm_pcd_plcr_frame_length_select;
+
+/**
+ @Description Enumeration type for selecting roll-back frame
+*/
+typedef enum ioc_fm_pcd_plcr_roll_back_frame_select {
+ e_IOC_FM_PCD_PLCR_ROLLBACK_L2_FRM_LEN, /**< Rollback L2 frame length */
+ e_IOC_FM_PCD_PLCR_ROLLBACK_FULL_FRM_LEN /**< Rollback Full frame length */
+} ioc_fm_pcd_plcr_roll_back_frame_select;
+
+/**
+ @Description Enumeration type for selecting the policer profile packet or byte mode
+*/
+typedef enum ioc_fm_pcd_plcr_rate_mode {
+ e_IOC_FM_PCD_PLCR_BYTE_MODE, /**< Byte mode */
+ e_IOC_FM_PCD_PLCR_PACKET_MODE /**< Packet mode */
+} ioc_fm_pcd_plcr_rate_mode;
+
+/**
+ @Description Enumeration type for defining action of frame
+*/
+typedef enum ioc_fm_pcd_done_action {
+ e_IOC_FM_PCD_ENQ_FRAME = 0, /**< Enqueue frame */
+ e_IOC_FM_PCD_DROP_FRAME /**< Drop frame */
+} ioc_fm_pcd_done_action;
+
+/**
+ @Description Enumeration type for selecting the policer counter
+*/
+typedef enum ioc_fm_pcd_plcr_profile_counters {
+ e_IOC_FM_PCD_PLCR_PROFILE_GREEN_PACKET_TOTAL_COUNTER, /**< Green packets counter */
+ e_IOC_FM_PCD_PLCR_PROFILE_YELLOW_PACKET_TOTAL_COUNTER, /**< Yellow packets counter */
+ e_IOC_FM_PCD_PLCR_PROFILE_RED_PACKET_TOTAL_COUNTER, /**< Red packets counter */
+ e_IOC_FM_PCD_PLCR_PROFILE_RECOLOURED_YELLOW_PACKET_TOTAL_COUNTER, /**< Recolored yellow packets counter */
+ e_IOC_FM_PCD_PLCR_PROFILE_RECOLOURED_RED_PACKET_TOTAL_COUNTER /**< Recolored red packets counter */
+} ioc_fm_pcd_plcr_profile_counters;
+
+/**
+ @Description Enumeration type for selecting the PCD action after extraction
+*/
+typedef enum ioc_fm_pcd_action {
+ e_IOC_FM_PCD_ACTION_NONE, /**< NONE */
+ e_IOC_FM_PCD_ACTION_EXACT_MATCH, /**< Exact match on the selected extraction*/
+ e_IOC_FM_PCD_ACTION_INDEXED_LOOKUP /**< Indexed lookup on the selected extraction*/
+} ioc_fm_pcd_action;
+
+/**
+ @Description Enumeration type for selecting type of insert manipulation
+*/
+typedef enum ioc_fm_pcd_manip_hdr_insrt_type {
+ e_IOC_FM_PCD_MANIP_INSRT_GENERIC, /**< Insert according to offset & size */
+ e_IOC_FM_PCD_MANIP_INSRT_BY_HDR, /**< Insert according to protocol */
+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
+ e_IOC_FM_PCD_MANIP_INSRT_BY_TEMPLATE /**< Insert template to start of frame */
+#endif /* FM_CAPWAP_SUPPORT */
+} ioc_fm_pcd_manip_hdr_insrt_type;
+
+/**
+ @Description Enumeration type for selecting type of remove manipulation
+*/
+typedef enum ioc_fm_pcd_manip_hdr_rmv_type {
+ e_IOC_FM_PCD_MANIP_RMV_GENERIC, /**< Remove according to offset & size */
+ e_IOC_FM_PCD_MANIP_RMV_BY_HDR /**< Remove according to offset & size */
+} ioc_fm_pcd_manip_hdr_rmv_type;
+
+/**
+ @Description An enum for selecting specific L2 fields removal
+*/
+typedef enum ioc_fm_pcd_manip_hdr_rmv_specific_l2 {
+ e_IOC_FM_PCD_MANIP_HDR_RMV_ETHERNET, /**< Ethernet/802.3 MAC */
+ e_IOC_FM_PCD_MANIP_HDR_RMV_STACKED_QTAGS, /**< stacked QTags */
+ e_IOC_FM_PCD_MANIP_HDR_RMV_ETHERNET_AND_MPLS,
+ /**< MPLS and Ethernet/802.3 MAC header unitl
+ the header which follows the MPLS header */
+ e_IOC_FM_PCD_MANIP_HDR_RMV_MPLS /**< Remove MPLS header (Unlimited MPLS labels) */
+} ioc_fm_pcd_manip_hdr_rmv_specific_l2;
+
+/**
+ @Description Enumeration type for selecting specific fields updates
+*/
+typedef enum ioc_fm_pcd_manip_hdr_field_update_type {
+ e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_VLAN, /**< VLAN updates */
+ e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_IPV4, /**< IPV4 updates */
+ e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_IPV6, /**< IPV6 updates */
+ e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_TCP_UDP, /**< TCP_UDP updates */
+} ioc_fm_pcd_manip_hdr_field_update_type;
+
+/**
+ @Description Enumeration type for selecting VLAN updates
+*/
+typedef enum ioc_fm_pcd_manip_hdr_field_update_vlan {
+ e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_VLAN_VPRI, /**< Replace VPri of outer most VLAN tag. */
+ e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_DSCP_TO_VLAN /**< DSCP to VLAN priority bits translation */
+} ioc_fm_pcd_manip_hdr_field_update_vlan;
+
+/**
+ @Description Enumeration type for selecting specific L2 fields removal
+*/
+typedef enum ioc_fm_pcd_manip_hdr_insrt_specific_l2 {
+ e_IOC_FM_PCD_MANIP_HDR_INSRT_MPLS /**< Insert MPLS header (Unlimited MPLS labels) */
+} ioc_fm_pcd_manip_hdr_insrt_specific_l2;
+
+#if (DPAA_VERSION >= 11)
+/**
+ @Description Enumeration type for selecting QoS mapping mode
+
+ Note: In all cases except 'e_FM_PCD_MANIP_HDR_QOS_MAPPING_NONE'
+ User should instruct the port to read the parser-result
+*/
+typedef enum ioc_fm_pcd_manip_hdr_qos_mapping_mode {
+ e_IOC_FM_PCD_MANIP_HDR_QOS_MAPPING_NONE = 0, /**< No mapping, QoS field will not be changed */
+ e_IOC_FM_PCD_MANIP_HDR_QOS_MAPPING_AS_IS, /**< QoS field will be overwritten by the last byte in the parser-result. */
+} ioc_fm_pcd_manip_hdr_qos_mapping_mode;
+
+/**
+ @Description Enumeration type for selecting QoS source
+
+ Note: In all cases except 'e_FM_PCD_MANIP_HDR_QOS_SRC_NONE'
+ User should left room for the parser-result on input/output buffer
+ and instruct the port to read/write the parser-result to the buffer (RPD should be set)
+*/
+typedef enum ioc_fm_pcd_manip_hdr_qos_src {
+ e_IOC_FM_PCD_MANIP_HDR_QOS_SRC_NONE = 0, /**< TODO */
+ e_IOC_FM_PCD_MANIP_HDR_QOS_SRC_USER_DEFINED, /**< QoS will be taken from the last byte in the parser-result. */
+} ioc_fm_pcd_manip_hdr_qos_src;
+#endif /* (DPAA_VERSION >= 11) */
+
+/**
+ @Description Enumeration type for selecting type of header insertion
+*/
+typedef enum ioc_fm_pcd_manip_hdr_insrt_by_hdr_type {
+ e_IOC_FM_PCD_MANIP_INSRT_BY_HDR_SPECIFIC_L2,/**< Specific L2 fields insertion */
+#if (DPAA_VERSION >= 11)
+ e_IOC_FM_PCD_MANIP_INSRT_BY_HDR_IP, /**< IP insertion */
+ e_IOC_FM_PCD_MANIP_INSRT_BY_HDR_UDP, /**< UDP insertion */
+ e_IOC_FM_PCD_MANIP_INSRT_BY_HDR_UDP_LITE, /**< UDP lite insertion */
+ e_IOC_FM_PCD_MANIP_INSRT_BY_HDR_CAPWAP /**< CAPWAP insertion */
+#endif /* (DPAA_VERSION >= 11) */
+} ioc_fm_pcd_manip_hdr_insrt_by_hdr_type;
+
+/**
+ @Description Enumeration type for selecting specific custom command
+*/
+typedef enum ioc_fm_pcd_manip_hdr_custom_type {
+ e_IOC_FM_PCD_MANIP_HDR_CUSTOM_IP_REPLACE, /**< Replace IPv4/IPv6 */
+ e_IOC_FM_PCD_MANIP_HDR_CUSTOM_GEN_FIELD_REPLACE,
+} ioc_fm_pcd_manip_hdr_custom_type;
+
+/**
+ @Description Enumeration type for selecting specific custom command
+*/
+typedef enum ioc_fm_pcd_manip_hdr_custom_ip_replace {
+ e_IOC_FM_PCD_MANIP_HDR_CUSTOM_REPLACE_IPV4_BY_IPV6, /**< Replace IPv4 by IPv6 */
+ e_IOC_FM_PCD_MANIP_HDR_CUSTOM_REPLACE_IPV6_BY_IPV4 /**< Replace IPv6 by IPv4 */
+} ioc_fm_pcd_manip_hdr_custom_ip_replace;
+
+/**
+ @Description Enumeration type for selecting type of header removal
+*/
+typedef enum ioc_fm_pcd_manip_hdr_rmv_by_hdr_type {
+ e_IOC_FM_PCD_MANIP_RMV_BY_HDR_SPECIFIC_L2 = 0,/**< Specific L2 fields removal */
+#if (DPAA_VERSION >= 11)
+ e_IOC_FM_PCD_MANIP_RMV_BY_HDR_CAPWAP, /**< CAPWAP removal */
+#endif /* (DPAA_VERSION >= 11) */
+#if (DPAA_VERSION >= 11) || ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT))
+ e_IOC_FM_PCD_MANIP_RMV_BY_HDR_FROM_START,/**< Locate from data that is not the header */
+#endif /* (DPAA_VERSION >= 11) || ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) */
+} ioc_fm_pcd_manip_hdr_rmv_by_hdr_type;
+
+/**
+ @Description Enumeration type for selecting type of timeout mode
+*/
+typedef enum ioc_fm_pcd_manip_reassem_time_out_mode {
+ e_IOC_FM_PCD_MANIP_TIME_OUT_BETWEEN_FRAMES,
+ /**< Limits the time of the reassembly process
+ from the first fragment to the last */
+ e_IOC_FM_PCD_MANIP_TIME_OUT_BETWEEN_FRAG
+ /**< Limits the time of receiving the fragment */
+} ioc_fm_pcd_manip_reassem_time_out_mode;
+
+/**
+ @Description Enumeration type for selecting type of WaysNumber mode
+*/
+typedef enum ioc_fm_pcd_manip_reassem_ways_number {
+ e_IOC_FM_PCD_MANIP_ONE_WAY_HASH = 1, /**< One way hash */
+ e_IOC_FM_PCD_MANIP_TWO_WAYS_HASH, /**< Two ways hash */
+ e_IOC_FM_PCD_MANIP_THREE_WAYS_HASH, /**< Three ways hash */
+ e_IOC_FM_PCD_MANIP_FOUR_WAYS_HASH, /**< Four ways hash */
+ e_IOC_FM_PCD_MANIP_FIVE_WAYS_HASH, /**< Five ways hash */
+ e_IOC_FM_PCD_MANIP_SIX_WAYS_HASH, /**< Six ways hash */
+ e_IOC_FM_PCD_MANIP_SEVEN_WAYS_HASH, /**< Seven ways hash */
+ e_IOC_FM_PCD_MANIP_EIGHT_WAYS_HASH /**< Eight ways hash */
+} ioc_fm_pcd_manip_reassem_ways_number;
+
+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
+/**
+ @Description Enumeration type for selecting type of statistics mode
+*/
+typedef enum ioc_fm_pcd_stats {
+ e_IOC_FM_PCD_STATS_PER_FLOWID = 0 /**< Flow ID is used as index for getting statistics */
+} ioc_fm_pcd_stats;
+#endif
+
+/**
+ @Description Enumeration type for selecting manipulation type
+*/
+typedef enum ioc_fm_pcd_manip_type {
+ e_IOC_FM_PCD_MANIP_HDR = 0, /**< Header manipulation */
+ e_IOC_FM_PCD_MANIP_REASSEM, /**< Reassembly */
+ e_IOC_FM_PCD_MANIP_FRAG, /**< Fragmentation */
+ e_IOC_FM_PCD_MANIP_SPECIAL_OFFLOAD /**< Special Offloading */
+} ioc_fm_pcd_manip_type;
+
+/**
+ @Description Enumeration type for selecting type of statistics mode
+*/
+typedef enum ioc_fm_pcd_cc_stats_mode {
+ e_IOC_FM_PCD_CC_STATS_MODE_NONE = 0, /**< No statistics support */
+ e_IOC_FM_PCD_CC_STATS_MODE_FRAME, /**< Frame count statistics */
+ e_IOC_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME, /**< Byte and frame count statistics */
+#if (DPAA_VERSION >= 11)
+ e_IOC_FM_PCD_CC_STATS_MODE_RMON,/**< Byte and frame length range count statistics */
+#endif /* (DPAA_VERSION >= 11) */
+} ioc_fm_pcd_cc_stats_mode;
+
+/**
+ @Description Enumeration type for determining the action in case an IP packet
+ is larger than MTU but its DF (Don't Fragment) bit is set.
+*/
+typedef enum ioc_fm_pcd_manip_dont_frag_action {
+ e_IOC_FM_PCD_MANIP_DISCARD_PACKET = 0, /**< Discard packet */
+ e_IOC_FM_PCD_MANIP_ENQ_TO_ERR_Q_OR_DISCARD_PACKET = e_IOC_FM_PCD_MANIP_DISCARD_PACKET,
+ /**< Obsolete, cannot enqueue to error queue;
+ In practice, selects to discard packets;
+ Will be removed in the future */
+ e_IOC_FM_PCD_MANIP_FRAGMENT_PACKECT, /**< Fragment packet and continue normal processing */
+ e_IOC_FM_PCD_MANIP_CONTINUE_WITHOUT_FRAG /**< Continue normal processing without fragmenting the packet */
+} ioc_fm_pcd_manip_dont_frag_action;
+
+/**
+ @Description Enumeration type for selecting type of special offload manipulation
+*/
+typedef enum ioc_fm_pcd_manip_special_offload_type {
+ e_IOC_FM_PCD_MANIP_SPECIAL_OFFLOAD_IPSEC,/**< IPSec offload manipulation */
+#if (DPAA_VERSION >= 11)
+ e_IOC_FM_PCD_MANIP_SPECIAL_OFFLOAD_CAPWAP/**< CAPWAP offload manipulation */
+#endif /* (DPAA_VERSION >= 11) */
+} ioc_fm_pcd_manip_special_offload_type;
+
+/**
+ @Description A union of protocol dependent special options
+ (Must match union u_FmPcdHdrProtocolOpt defined in fm_pcd_ext.h)
+*/
+typedef union ioc_fm_pcd_hdr_protocol_opt_u {
+ ioc_eth_protocol_opt_t eth_opt; /**< Ethernet options */
+ ioc_vlan_protocol_opt_t vlan_opt; /**< Vlan options */
+ ioc_mpls_protocol_opt_t mpls_opt; /**< MPLS options */
+ ioc_ipv4_protocol_opt_t ipv4_opt; /**< IPv4 options */
+ ioc_ipv6_protocol_opt_t ipv6_opt; /**< IPv6 options */
+#if (DPAA_VERSION >= 11)
+ ioc_capwap_protocol_opt_t capwap_opt; /**< CAPWAP options */
+#endif /* (DPAA_VERSION >= 11) */
+} ioc_fm_pcd_hdr_protocol_opt_u;
+
+/**
+ @Description A union holding all known protocol fields
+*/
+typedef union ioc_fm_pcd_fields_u {
+ ioc_header_field_eth_t eth; /**< Ethernet*/
+ ioc_header_field_vlan_t vlan; /**< VLAN*/
+ ioc_header_field_llc_snap_t llc_snap; /**< LLC SNAP*/
+ ioc_header_field_pppoe_t pppoe; /**< PPPoE*/
+ ioc_header_field_mpls_t mpls; /**< MPLS*/
+ ioc_header_field_ip_t ip; /**< IP */
+ ioc_header_field_ipv4_t ipv4; /**< IPv4*/
+ ioc_header_field_ipv6_t ipv6; /**< IPv6*/
+ ioc_header_field_udp_t udp; /**< UDP */
+ ioc_header_field_udp_lite_t udp_lite; /**< UDP_Lite*/
+ ioc_header_field_tcp_t tcp; /**< TCP */
+ ioc_header_field_sctp_t sctp; /**< SCTP*/
+ ioc_header_field_dccp_t dccp; /**< DCCP*/
+ ioc_header_field_gre_t gre; /**< GRE */
+ ioc_header_field_minencap_t minencap;/**< Minimal Encapsulation */
+ ioc_header_field_ipsec_ah_t ipsec_ah; /**< IPSec AH*/
+ ioc_header_field_ipsec_esp_t ipsec_esp; /**< IPSec ESP*/
+ ioc_header_field_udp_encap_esp_t udp_encap_esp;
+ /**< UDP Encapsulation ESP */
+} ioc_fm_pcd_fields_u;
+
+/**
+ @Description Parameters for defining header extraction for key generation
+*/
+typedef struct ioc_fm_pcd_from_hdr_t {
+ uint8_t size; /**< Size in byte */
+ uint8_t offset; /**< Byte offset */
+} ioc_fm_pcd_from_hdr_t;
+
+/**
+ @Description Parameters for defining field extraction for key generation
+*/
+typedef struct ioc_fm_pcd_from_field_t {
+ ioc_fm_pcd_fields_u field; /**< Field selection */
+ uint8_t size; /**< Size in byte */
+ uint8_t offset; /**< Byte offset */
+} ioc_fm_pcd_from_field_t;
+
+/**
+ @Description Parameters for defining a single network environment unit
+ A distinction unit should be defined if it will later be used
+ by one or more PCD engines to distinguish between flows.
+ (Must match struct t_FmPcdDistinctionUnit defined in fm_pcd_ext.h)
+*/
+typedef struct ioc_fm_pcd_distinction_unit_t {
+ struct {
+ ioc_net_header_type hdr;/**< One of the headers supported by the FM */
+ ioc_fm_pcd_hdr_protocol_opt_u opt; /**< Select only one option! */
+ } hdrs[IOC_FM_PCD_MAX_NUM_OF_INTERCHANGEABLE_HDRS];
+} ioc_fm_pcd_distinction_unit_t;
+
+/**
+ @Description Parameters for defining all different distinction units supported
+ by a specific PCD Network Environment Characteristics module.
+
+ Each unit represent a protocol or a group of protocols that may
+ be used later by the different PCD engines to distinguish between flows.
+ (Must match struct t_FmPcdNetEnvParams defined in fm_pcd_ext.h)
+*/
+struct fm_pcd_net_env_params_t {
+ uint8_t num_of_distinction_units;
+ /**< Number of different units to be identified */
+ ioc_fm_pcd_distinction_unit_t
+ units[IOC_FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS];
+ /**< An array of num_of_distinction_units of the
+ different units to be identified */
+};
+
+typedef struct ioc_fm_pcd_net_env_params_t {
+ struct fm_pcd_net_env_params_t param;
+ void *id;
+ /**< Output parameter; Returns the net-env Id to be used */
+} ioc_fm_pcd_net_env_params_t;
+
+/**
+ @Description Parameters for defining a single extraction action when
+ creating a key
+*/
+typedef struct ioc_fm_pcd_extract_entry_t {
+ ioc_fm_pcd_extract_type type; /**< Extraction type select */
+ union {
+ struct {
+ ioc_net_header_type hdr; /**< Header selection */
+ bool ignore_protocol_validation;
+ /**< Ignore protocol validation */
+ ioc_fm_pcd_hdr_index hdr_index;
+ /**< Relevant only for MPLS, VLAN and tunneled
+ IP. Otherwise should be cleared.*/
+ ioc_fm_pcd_extract_by_hdr_type type;
+ /**< Header extraction type select */
+ union {
+ ioc_fm_pcd_from_hdr_t from_hdr;
+ /**< Extract bytes from header parameters */
+ ioc_fm_pcd_from_field_t from_field;
+ /**< Extract bytes from field parameters */
+ ioc_fm_pcd_fields_u full_field;
+ /**< Extract full field parameters */
+ } extract_by_hdr_type;
+ } extract_by_hdr;/**< Used when type = e_IOC_FM_PCD_KG_EXTRACT_BY_HDR */
+ struct {
+ ioc_fm_pcd_extract_from src; /**< Non-header extraction source */
+ ioc_fm_pcd_action action; /**< Relevant for CC Only */
+ uint16_t ic_indx_mask; /**< Relevant only for CC when
+ action = e_IOC_FM_PCD_ACTION_INDEXED_LOOKUP;
+ Note that the number of bits that are set within
+ this mask must be log2 of the CC-node 'num_of_keys'.
+ Note that the mask cannot be set on the lower bits. */
+ uint8_t offset; /**< Byte offset */
+ uint8_t size; /**< Size in bytes */
+ } extract_non_hdr;
+ /**< Used when type = e_IOC_FM_PCD_KG_EXTRACT_NON_HDR */
+ } extract_params;
+} ioc_fm_pcd_extract_entry_t;
+
+/**
+ @Description A structure for defining masks for each extracted
+ field in the key.
+*/
+typedef struct ioc_fm_pcd_kg_extract_mask_t {
+ uint8_t extract_array_index; /**< Index in the extraction array, as initialized by user */
+ uint8_t offset; /**< Byte offset */
+ uint8_t mask; /**< A byte mask (selected bits will be ignored) */
+} ioc_fm_pcd_kg_extract_mask_t;
+
+/**
+ @Description A structure for defining default selection per groups
+ of fields
+*/
+typedef struct ioc_fm_pcd_kg_extract_dflt_t {
+ ioc_fm_pcd_kg_known_fields_dflt_types type; /**< Default type select*/
+ ioc_fm_pcd_kg_extract_dflt_select dflt_select; /**< Default register select */
+} ioc_fm_pcd_kg_extract_dflt_t;
+
+
+/**
+ @Description A structure for defining all parameters needed for
+ generation a key and using a hash function
+*/
+typedef struct ioc_fm_pcd_kg_key_extract_and_hash_params_t {
+ uint32_t private_dflt0; /**< Scheme default register 0 */
+ uint32_t private_dflt1; /**< Scheme default register 1 */
+ uint8_t num_of_used_extracts; /**< defines the valid size of the following array */
+ ioc_fm_pcd_extract_entry_t extract_array[IOC_FM_PCD_KG_MAX_NUM_OF_EXTRACTS_PER_KEY];
+ /**< An array of extraction definitions. */
+ uint8_t num_of_used_dflts; /**< defines the valid size of the following array */
+ ioc_fm_pcd_kg_extract_dflt_t dflts[IOC_FM_PCD_KG_NUM_OF_DEFAULT_GROUPS];
+ /**< For each extraction used in this scheme, specify the required
+ default register to be used when header is not found.
+ types not specified in this array will get undefined value. */
+ uint8_t num_of_used_masks; /**< Defines the valid size of the following array */
+ ioc_fm_pcd_kg_extract_mask_t masks[IOC_FM_PCD_KG_NUM_OF_EXTRACT_MASKS];
+ uint8_t hash_shift; /**< Hash result right shift.
+ Selects the 24 bits out of the 64 hash result.
+ 0 means using the 24 LSB's, otherwise use the
+ 24 LSB's after shifting right.*/
+ uint32_t hash_distribution_num_of_fqids; /**< must be > 1 and a power of 2. Represents the range
+ of queues for the key and hash functionality */
+ uint8_t hash_distribution_fqids_shift; /**< selects the FQID bits that will be effected by the hash */
+ bool symmetric_hash; /**< TRUE to generate the same hash for frames with swapped source and
+ destination fields on all layers; If TRUE, driver will check that for
+ all layers, if SRC extraction is selected, DST extraction must also be
+ selected, and vice versa. */
+} ioc_fm_pcd_kg_key_extract_and_hash_params_t;
+
+/**
+ @Description A structure of parameters for defining a single
+ Qid mask (extracted OR).
+*/
+typedef struct ioc_fm_pcd_kg_extracted_or_params_t {
+ ioc_fm_pcd_extract_type type; /**< Extraction type select */
+ union {
+ struct { /**< used when type = e_IOC_FM_PCD_KG_EXTRACT_BY_HDR */
+ ioc_net_header_type hdr;
+ ioc_fm_pcd_hdr_index hdr_index; /**< Relevant only for MPLS, VLAN and tunneled
+ IP. Otherwise should be cleared.*/
+ bool ignore_protocol_validation;
+
+ } extract_by_hdr;
+ ioc_fm_pcd_extract_from src; /**< used when type = e_IOC_FM_PCD_KG_EXTRACT_NON_HDR */
+ } extract_params;
+ uint8_t extraction_offset; /**< Offset for extraction */
+ ioc_fm_pcd_kg_extract_dflt_select dflt_value; /**< Select register from which extraction is taken if
+ field not found */
+ uint8_t mask; /**< Mask LSB byte of extraction (specified bits are ignored) */
+ uint8_t bit_offset_in_fqid;
+ /**< 0-31, Selects which bits of the 24 FQID bits to effect using
+ the extracted byte; Assume byte is placed as the 8 MSB's in
+ a 32 bit word where the lower bits
+ are the FQID; i.e if bitOffsetInFqid=1 than its LSB
+ will effect the FQID MSB, if bitOffsetInFqid=24 than the
+ extracted byte will effect the 8 LSB's of the FQID,
+ if bitOffsetInFqid=31 than the byte's MSB will effect
+ the FQID's LSB; 0 means - no effect on FQID;
+ Note that one, and only one of
+ bitOffsetInFqid or bitOffsetInPlcrProfile must be set (i.e,
+ extracted byte must effect either FQID or Policer profile).*/
+ uint8_t bit_offset_in_plcr_profile;
+ /**< 0-15, Selects which bits of the 8 policer profile id bits to
+ effect using the extracted byte; Assume byte is placed
+ as the 8 MSB's in a 16 bit word where the lower bits
+ are the policer profile id; i.e if bitOffsetInPlcrProfile=1
+ than its LSB will effect the profile MSB, if bitOffsetInFqid=8
+ than the extracted byte will effect the whole policer profile id,
+ if bitOffsetInFqid=15 than the byte's MSB will effect
+ the Policer Profile id's LSB;
+ 0 means - no effect on policer profile; Note that one, and only one of
+ bitOffsetInFqid or bitOffsetInPlcrProfile must be set (i.e,
+ extracted byte must effect either FQID or Policer profile).*/
+} ioc_fm_pcd_kg_extracted_or_params_t;
+
+/**
+ @Description A structure for configuring scheme counter
+*/
+typedef struct ioc_fm_pcd_kg_scheme_counter_t {
+ bool update; /**< FALSE to keep the current counter state
+ and continue from that point, TRUE to update/reset
+ the counter when the scheme is written. */
+ uint32_t value; /**< If update=TRUE, this value will be written into the
+ counter; clear this field to reset the counter. */
+} ioc_fm_pcd_kg_scheme_counter_t;
+
+
+/**
+ @Description A structure for retrieving FMKG_SE_SPC
+*/
+typedef struct ioc_fm_pcd_kg_scheme_spc_t {
+ uint32_t val; /**< return value */
+ void *id; /**< scheme handle */
+} ioc_fm_pcd_kg_scheme_spc_t;
+
+/**
+ @Description A structure for defining policer profile parameters as required by keygen
+ (when policer is the next engine after this scheme).
+ (Must match struct t_FmPcdKgPlcrProfile defined in fm_pcd_ext.h)
+*/
+typedef struct ioc_fm_pcd_kg_plcr_profile_t {
+ bool shared_profile; /**< TRUE if this profile is shared between ports
+ (i.e. managed by master partition) May not be TRUE
+ if profile is after Coarse Classification*/
+ bool direct; /**< If TRUE, direct_relative_profile_id only selects the profile
+ id, if FALSE fqid_offset_relative_profile_id_base is used
+ together with fqid_offset_shift and num_of_profiles
+ parameters, to define a range of profiles from
+ which the KeyGen result will determine the
+ destination policer profile. */
+ union {
+ uint16_t direct_relative_profile_id; /**< Used if 'direct' is TRUE, to select policer profile.
+ This parameter should indicate the policer profile offset within the port's
+ policer profiles or SHARED window. */
+ struct {
+ uint8_t fqid_offset_shift; /**< Shift of KG results without the qid base */
+ uint8_t fqid_offset_relative_profile_id_base;
+ /**< OR of KG results without the qid base
+ This parameter should indicate the policer profile
+ offset within the port's policer profiles window
+ or SHARED window depends on shared_profile */
+ uint8_t num_of_profiles; /**< Range of profiles starting at base */
+ } indirect_profile; /**< Indirect profile parameters */
+ } profile_select; /**< Direct/indirect profile selection and parameters */
+} ioc_fm_pcd_kg_plcr_profile_t;
+
+#if DPAA_VERSION >= 11
+/**
+ @Description Parameters for configuring a storage profile for a KeyGen scheme.
+*/
+typedef struct ioc_fm_pcd_kg_storage_profile_t {
+ bool direct;
+ /**< If TRUE, directRelativeProfileId only selects the
+ profile id;
+ If FALSE, fqidOffsetRelativeProfileIdBase is used
+ together with fqidOffsetShift and numOfProfiles
+ parameters to define a range of profiles from which
+ the KeyGen result will determine the destination
+ storage profile. */
+ union {
+ uint16_t direct_relative_profileId;
+ /**< Used when 'direct' is TRUE, to select a storage profile;
+ should indicate the storage profile offset within the
+ port's storage profiles window. */
+ struct {
+ uint8_t fqid_offset_shift;
+ /**< Shift of KeyGen results without the FQID base */
+ uint8_t fqid_offset_relative_profile_id_base;
+ /**< OR of KeyGen results without the FQID base;
+ should indicate the policer profile offset within the
+ port's storage profiles window. */
+ uint8_t num_of_profiles;
+ /**< Range of profiles starting at base. */
+ } indirect_profile;
+ /**< Indirect profile parameters. */
+ } profile_select;
+ /**< Direct/indirect profile selection and parameters. */
+} ioc_fm_pcd_kg_storage_profile_t;
+#endif /* DPAA_VERSION >= 11 */
+
+/**
+ @Description Parameters for defining CC as the next engine after KeyGen
+ (Must match struct t_FmPcdKgCc defined in fm_pcd_ext.h)
+*/
+typedef struct ioc_fm_pcd_kg_cc_t {
+ void *tree_id; /**< CC Tree id */
+ uint8_t grp_id; /**< CC group id within the CC tree */
+ bool plcr_next; /**< TRUE if after CC, in case of data frame,
+ policing is required. */
+ bool bypass_plcr_profile_generation;
+ /**< TRUE to bypass KeyGen policer profile generation;
+ selected profile is the one set at port initialization. */
+ ioc_fm_pcd_kg_plcr_profile_t plcr_profile; /**< Valid only if plcr_next = TRUE and
+ bypass_plcr_profile_generation = FALSE */
+} ioc_fm_pcd_kg_cc_t;
+
+/**
+ @Description Parameters for defining initializing a KeyGen scheme
+ (Must match struct t_FmPcdKgSchemeParams defined in fm_pcd_ext.h)
+*/
+struct fm_pcd_kg_scheme_params_t {
+ bool modify; /**< TRUE to change an existing scheme */
+ union {
+ uint8_t relative_scheme_id;
+ /**< if modify=FALSE: partition-relative scheme id */
+ void *scheme_id;
+ /**< if modify=TRUE: the id of an existing scheme */
+ } scm_id;
+ bool always_direct; /**< This scheme is reached only directly,
+ i.e. no need for match vector;
+ KeyGen will ignore it when matching */
+ struct {
+ /**< HL relevant only if always_direct=FALSE */
+ void *net_env_id;
+ /**< The id of the Network Environment as returned
+ by FM_PCD_NetEnvCharacteristicsSet() */
+ uint8_t num_of_distinction_units;
+ /**< Number of NetEnv units listed in unit_ids array */
+ uint8_t unit_ids[IOC_FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS];
+ /**< Indexes as passed to SetNetEnvCharacteristics (?) array */
+ } net_env_params;
+ bool use_hash;
+ /**< use the KG Hash functionality */
+ ioc_fm_pcd_kg_key_extract_and_hash_params_t key_extract_and_hash_params;
+ /**< used only if useHash = TRUE */
+ bool bypass_fqid_generation;
+ /**< Normally - FALSE, TRUE to avoid FQID update in the IC;
+ In such a case FQID after KG will be the default FQID
+ defined for the relevant port, or the FQID defined by CC
+ in cases where CC was the previous engine. */
+ uint32_t base_fqid;
+ /**< Base FQID; Relevant only if bypass_fqid_generation = FALSE;
+ If hash is used and an even distribution is expected
+ according to hash_distribution_num_of_fqids, base_fqid must be aligned to
+ hash_distribution_num_of_fqids. */
+ uint8_t num_of_used_extracted_ors;
+ /**< Number of FQID masks listed in extracted_ors array*/
+ ioc_fm_pcd_kg_extracted_or_params_t
+ extracted_ors[IOC_FM_PCD_KG_NUM_OF_GENERIC_REGS];
+ /**< IOC_FM_PCD_KG_NUM_OF_GENERIC_REGS
+ registers are shared between qid_masks
+ functionality and some of the extraction
+ actions; Normally only some will be used
+ for qid_mask. Driver will return error if
+ resource is full at initialization time. */
+#if DPAA_VERSION >= 11
+ bool override_storage_profile;
+ /**< TRUE if KeyGen override previously decided storage profile */
+ ioc_fm_pcd_kg_storage_profile_t storage_profile;
+ /**< Used when override_storage_profile=TRUE */
+#endif /* DPAA_VERSION >= 11 */
+ ioc_fm_pcd_engine next_engine;
+ /**< may be BMI, PLCR or CC */
+ union {
+ /**< depends on nextEngine */
+ ioc_fm_pcd_done_action done_action;
+ /**< Used when next engine is BMI (done) */
+ ioc_fm_pcd_kg_plcr_profile_t plcr_profile;
+ /**< Used when next engine is PLCR */
+ ioc_fm_pcd_kg_cc_t cc;
+ /**< Used when next engine is CC */
+ } kg_next_engine_params;
+ ioc_fm_pcd_kg_scheme_counter_t scheme_counter;
+ /**< A structure of parameters for updating the scheme counter */
+};
+
+typedef struct ioc_fm_pcd_kg_scheme_params_t {
+ struct fm_pcd_kg_scheme_params_t param;
+ void *id;
+ /**< Returns the scheme Id to be used */
+} ioc_fm_pcd_kg_scheme_params_t;
+
+/**
+ @Collection
+*/
+#if DPAA_VERSION >= 11
+#define IOC_FM_PCD_CC_STATS_MAX_NUM_OF_FLR 10 /* Maximal supported number of frame length ranges */
+#define IOC_FM_PCD_CC_STATS_FLR_SIZE 2 /* Size in bytes of a frame length range limit */
+#endif /* DPAA_VERSION >= 11 */
+#define IOC_FM_PCD_CC_STATS_FLR_COUNT_SIZE 4 /* Size in bytes of a frame length range counter */
+/* @} */
+
+/**
+ @Description Parameters for defining CC as the next engine after a CC node.
+ (Must match struct t_FmPcdCcNextCcParams defined in fm_pcd_ext.h)
+*/
+typedef struct ioc_fm_pcd_cc_next_cc_params_t {
+ void *cc_node_id; /**< Id of the next CC node */
+} ioc_fm_pcd_cc_next_cc_params_t;
+
+#if DPAA_VERSION >= 11
+/**
+ @Description A structure for defining Frame Replicator as the next engine after a CC node.
+ (Must match struct t_FmPcdCcNextFrParams defined in fm_pcd_ext.h)
+*/
+typedef struct ioc_fm_pcd_cc_next_fr_params_t {
+ void *frm_replic_id; /**< The id of the next frame replicator group */
+} ioc_fm_pcd_cc_next_fr_params_t;
+#endif /* DPAA_VERSION >= 11 */
+
+/**
+ @Description A structure for defining PLCR params when PLCR is the
+ next engine after a CC node
+ (Must match struct t_FmPcdCcNextPlcrParams defined in fm_pcd_ext.h)
+*/
+typedef struct ioc_fm_pcd_cc_next_plcr_params_t {
+ bool override_params; /**< TRUE if CC override previously decided parameters*/
+ bool shared_profile; /**< Relevant only if overrideParams=TRUE:
+ TRUE if this profile is shared between ports */
+ uint16_t new_relative_profile_id; /**< Relevant only if overrideParams=TRUE:
+ (otherwise profile id is taken from keygen);
+ This parameter should indicate the policer
+ profile offset within the port's
+ policer profiles or from SHARED window.*/
+ uint32_t new_fqid; /**< Relevant only if overrideParams=TRUE:
+ FQID for enquing the frame;
+ In earlier chips if policer next engine is KEYGEN,
+ this parameter can be 0, because the KEYGEN always decides
+ the enqueue FQID.*/
+#if DPAA_VERSION >= 11
+ uint8_t new_relative_storage_profile_id;
+ /**< Indicates the relative storage profile offset within
+ the port's storage profiles window;
+ Relevant only if the port was configured with VSP. */
+#endif /* DPAA_VERSION >= 11 */
+} ioc_fm_pcd_cc_next_plcr_params_t;
+
+/**
+ @Description A structure for defining enqueue params when BMI is the
+ next engine after a CC node
+ (Must match struct t_FmPcdCcNextEnqueueParams defined in fm_pcd_ext.h)
+*/
+typedef struct ioc_fm_pcd_cc_next_enqueue_params_t {
+ ioc_fm_pcd_done_action action; /**< Action - when next engine is BMI (done) */
+ bool override_fqid; /**< TRUE if CC override previously decided fqid and vspid,
+ relevant if action = e_IOC_FM_PCD_ENQ_FRAME */
+ uint32_t new_fqid; /**< Valid if overrideFqid=TRUE, FQID for enqueuing the frame
+ (otherwise FQID is taken from KeyGen),
+ relevant if action = e_IOC_FM_PCD_ENQ_FRAME*/
+#if DPAA_VERSION >= 11
+ uint8_t new_relative_storage_profile_id;
+ /**< Valid if override_fqid=TRUE, Indicates the relative virtual
+ storage profile offset within the port's storage profiles
+ window; Relevant only if the port was configured with VSP. */
+#endif /* DPAA_VERSION >= 11 */
+
+} ioc_fm_pcd_cc_next_enqueue_params_t;
+
+/**
+ @Description A structure for defining KG params when KG is the next engine after a CC node
+ (Must match struct t_FmPcdCcNextKgParams defined in fm_pcd_ext.h)
+*/
+typedef struct ioc_fm_pcd_cc_next_kg_params_t {
+ bool override_fqid; /**< TRUE if CC override previously decided fqid and vspid,
+ Note - this parameters are irrelevant for earlier chips */
+ uint32_t new_fqid; /**< Valid if overrideFqid=TRUE, FQID for enqueuing the frame
+ (otherwise FQID is taken from KeyGen),
+ Note - this parameters are irrelevant for earlier chips */
+#if DPAA_VERSION >= 11
+ uint8_t new_relative_storage_profile_id;
+ /**< Valid if override_fqid=TRUE, Indicates the relative virtual
+ storage profile offset within the port's storage profiles
+ window; Relevant only if the port was configured with VSP. */
+#endif /* DPAA_VERSION >= 11 */
+ void *p_direct_scheme; /**< Direct scheme id to go to. */
+} ioc_fm_pcd_cc_next_kg_params_t;
+
+/**
+ @Description Parameters for defining the next engine after a CC node.
+ (Must match struct ioc_fm_pcd_cc_next_engine_params_t defined in fm_pcd_ext.h)
+*/
+typedef struct ioc_fm_pcd_cc_next_engine_params_t {
+ ioc_fm_pcd_engine next_engine; /**< User has to initialize parameters
+ according to nextEngine definition */
+ union {
+ ioc_fm_pcd_cc_next_cc_params_t cc_params; /**< Parameters in case next engine is CC */
+ ioc_fm_pcd_cc_next_plcr_params_t plcr_params; /**< Parameters in case next engine is PLCR */
+ ioc_fm_pcd_cc_next_enqueue_params_t enqueue_params; /**< Parameters in case next engine is BMI */
+ ioc_fm_pcd_cc_next_kg_params_t kg_params; /**< Parameters in case next engine is KG */
+#if DPAA_VERSION >= 11
+ ioc_fm_pcd_cc_next_fr_params_t fr_params; /**< Parameters in case next engine is FR */
+#endif /* DPAA_VERSION >= 11 */
+ } params; /**< Union used for all the next-engine parameters options */
+ void *manip_id; /**< Handle to Manipulation object.
+ Relevant if next engine is of type result
+ (e_IOC_FM_PCD_PLCR, e_IOC_FM_PCD_KG, e_IOC_FM_PCD_DONE) */
+ bool statistics_en; /**< If TRUE, statistics counters are incremented
+ for each frame passing through this
+ Coarse Classification entry. */
+} ioc_fm_pcd_cc_next_engine_params_t;
+
+/**
+ @Description Parameters for defining a single CC key
+*/
+typedef struct ioc_fm_pcd_cc_key_params_t {
+ uint8_t *p_key; /**< pointer to the key of the size defined in key_size */
+ uint8_t *p_mask; /**< pointer to the Mask per key of the size defined
+ in keySize. p_key and p_mask (if defined) has to be
+ of the same size defined in the key_size */
+ ioc_fm_pcd_cc_next_engine_params_t cc_next_engine_params;
+ /**< parameters for the next for the defined Key in p_key */
+
+} ioc_fm_pcd_cc_key_params_t;
+
+/**
+ @Description Parameters for defining CC keys parameters
+ The driver supports two methods for CC node allocation: dynamic and static.
+ Static mode was created in order to prevent runtime alloc/free
+ of FMan memory (MURAM), which may cause fragmentation; in this mode,
+ the driver automatically allocates the memory according to
+ 'max_num_of_keys' parameter. The driver calculates the maximal memory
+ size that may be used for this CC-Node taking into consideration
+ 'mask_support' and 'statistics_mode' parameters.
+ When 'action' = e_IOC_FM_PCD_ACTION_INDEXED_LOOKUP in the extraction
+ parameters of this node, 'max_num_of_keys' must be equal to 'num_of_keys'.
+ In dynamic mode, 'max_num_of_keys' must be zero. At initialization,
+ all required structures are allocated according to 'num_of_keys'
+ parameter. During runtime modification, these structures are
+ re-allocated according to the updated number of keys.
+
+ Please note that 'action' and 'ic_indx_mask' mentioned in the
+ specific parameter explanations are passed in the extraction
+ parameters of the node (fields of extractccparams.extractnonhdr).
+*/
+typedef struct ioc_keys_params_t {
+ uint16_t max_num_of_keys;/**< Maximum number of keys that will (ever) be used in this CC-Node;
+ A value of zero may be used for dynamic memory allocation. */
+ bool mask_support; /**< This parameter is relevant only if a node is initialized with
+ action = e_IOC_FM_PCD_ACTION_EXACT_MATCH and max_num_of_keys > 0;
+ Should be TRUE to reserve table memory for key masks, even if
+ initial keys do not contain masks, or if the node was initialized
+ as 'empty' (without keys); this will allow user to add keys with
+ masks at runtime. */
+ ioc_fm_pcd_cc_stats_mode statistics_mode;/**< Determines the supported statistics mode for all node's keys.
+ To enable statistics gathering, statistics should be enabled per
+ every key, using 'statistics_en' in next engine parameters structure
+ of that key;
+ If 'max_num_of_keys' is set, all required structures will be
+ preallocated for all keys. */
+#if (DPAA_VERSION >= 11)
+ uint16_t frame_length_ranges[IOC_FM_PCD_CC_STATS_MAX_NUM_OF_FLR];
+ /**< Relevant only for 'RMON' statistics mode
+ (this feature is supported only on B4860 device);
+ Holds a list of programmable thresholds. For each received frame,
+ its length in bytes is examined against these range thresholds and
+ the appropriate counter is incremented by 1. For example, to belong
+ to range i, the following should hold:
+ range i-1 threshold < frame length <= range i threshold
+ Each range threshold must be larger then its preceding range
+ threshold. Last range threshold must be 0xFFFF. */
+#endif /* (DPAA_VERSION >= 11) */
+ uint16_t num_of_keys; /**< Number of initial keys;
+ Note that in case of 'action' = e_IOC_FM_PCD_ACTION_INDEXED_LOOKUP,
+ this field should be power-of-2 of the number of bits that are
+ set in 'ic_indx_mask'. */
+ uint8_t key_size; /**< Size of key - for extraction of type FULL_FIELD, 'key_size' has
+ to be the standard size of the selected key; For other extraction
+ types, 'key_size' has to be as size of extraction; When 'action' =
+ e_IOC_FM_PCD_ACTION_INDEXED_LOOKUP, 'keySize' must be 2. */
+ ioc_fm_pcd_cc_key_params_t key_params[IOC_FM_PCD_MAX_NUM_OF_KEYS];
+ /**< An array with 'num_of_keys' entries, each entry specifies the
+ corresponding key parameters;
+ When 'action' = e_IOC_FM_PCD_ACTION_EXACT_MATCH, this value must not
+ exceed 255 (IOC_FM_PCD_MAX_NUM_OF_KEYS-1) as the last entry is saved
+ for the 'miss' entry. */
+ ioc_fm_pcd_cc_next_engine_params_t cc_next_engine_params_for_miss;
+ /**< Parameters for defining the next engine when a key is not matched;
+ Not relevant if action = e_IOC_FM_PCD_ACTION_INDEXED_LOOKUP. */
+} ioc_keys_params_t;
+
+/**
+ @Description Parameters for defining a CC node
+*/
+struct fm_pcd_cc_node_params_t {
+ ioc_fm_pcd_extract_entry_t extract_cc_params;
+ /**< Extraction parameters */
+ ioc_keys_params_t keys_params;
+ /**< Keys definition matching the selected extraction */
+};
+
+typedef struct ioc_fm_pcd_cc_node_params_t {
+ struct fm_pcd_cc_node_params_t param;
+ void *id;
+ /**< Output parameter; returns the CC node Id to be used */
+} ioc_fm_pcd_cc_node_params_t;
+
+/**
+ @Description Parameters for defining a hash table
+ (Must match struct ioc_fm_pcd_hash_table_params_t defined in fm_pcd_ext.h)
+*/
+struct fm_pcd_hash_table_params_t {
+ uint16_t max_num_of_keys;
+ /**< Maximum Number Of Keys that will (ever) be used in this Hash-table */
+ ioc_fm_pcd_cc_stats_mode statistics_mode;
+ /**< If not e_IOC_FM_PCD_CC_STATS_MODE_NONE, the required structures for the
+ requested statistics mode will be allocated according to max_num_of_keys. */
+ uint8_t kg_hash_shift;
+ /**< KG-Hash-shift as it was configured in the KG-scheme
+ that leads to this hash-table. */
+ uint16_t hash_res_mask;
+ /**< Mask that will be used on the hash-result;
+ The number-of-sets for this hash will be calculated
+ as (2^(number of bits set in 'hash_res_mask'));
+ The 4 lower bits must be cleared. */
+ uint8_t hash_shift;
+ /**< Byte offset from the beginning of the KeyGen hash result to the
+ 2-bytes to be used as hash index. */
+ uint8_t match_key_size;
+ /**< Size of the exact match keys held by the hash buckets */
+
+ ioc_fm_pcd_cc_next_engine_params_t cc_next_engine_params_for_miss;
+ /**< Parameters for defining the next engine when a key is not matched */
+};
+
+typedef struct ioc_fm_pcd_hash_table_params_t {
+ struct fm_pcd_hash_table_params_t param;
+ void *id;
+} ioc_fm_pcd_hash_table_params_t;
+
+/**
+ @Description A structure with the arguments for the FM_PCD_HashTableAddKey ioctl() call
+*/
+typedef struct ioc_fm_pcd_hash_table_add_key_params_t {
+ void *p_hash_tbl;
+ uint8_t key_size;
+ ioc_fm_pcd_cc_key_params_t key_params;
+} ioc_fm_pcd_hash_table_add_key_params_t;
+
+/**
+ @Description Parameters for defining a CC tree group.
+
+This structure defines a CC group in terms of NetEnv units
+and the action to be taken in each case. The unit_ids list must
+be given in order from low to high indices.
+
+ioc_fm_pcd_cc_next_engine_params_t is a list of 2^num_of_distinction_units
+structures where each defines the next action to be taken for
+each units combination. for example:
+num_of_distinction_units = 2
+unit_ids = {1,3}
+next_engine_per_entries_in_grp[0] = ioc_fm_pcd_cc_next_engine_params_t for the case that
+ unit 1 - not found; unit 3 - not found;
+next_engine_per_entries_in_grp[1] = ioc_fm_pcd_cc_next_engine_params_t for the case that
+ unit 1 - not found; unit 3 - found;
+next_engine_per_entries_in_grp[2] = ioc_fm_pcd_cc_next_engine_params_t for the case that
+ unit 1 - found; unit 3 - not found;
+next_engine_per_entries_in_grp[3] = ioc_fm_pcd_cc_next_engine_params_t for the case that
+ unit 1 - found; unit 3 - found;
+*/
+typedef struct ioc_fm_pcd_cc_grp_params_t {
+ uint8_t num_of_distinction_units; /**< Up to 4 */
+ uint8_t unit_ids[IOC_FM_PCD_MAX_NUM_OF_CC_UNITS];
+ /**< Indexes of the units as defined in FM_PCD_NetEnvCharacteristicsSet() */
+ ioc_fm_pcd_cc_next_engine_params_t next_engine_per_entries_in_grp[IOC_FM_PCD_MAX_NUM_OF_CC_ENTRIES_IN_GRP];
+ /**< Maximum entries per group is 16 */
+} ioc_fm_pcd_cc_grp_params_t;
+
+/**
+ @Description Parameters for defining the CC tree groups
+ (Must match struct ioc_fm_pcd_cc_tree_params_t defined in fm_pcd_ext.h)
+*/
+typedef struct ioc_fm_pcd_cc_tree_params_t {
+ void *net_env_id; /**< Id of the Network Environment as returned
+ by FM_PCD_NetEnvCharacteristicsSet() */
+ uint8_t num_of_groups; /**< Number of CC groups within the CC tree */
+ ioc_fm_pcd_cc_grp_params_t fm_pcd_cc_group_params[IOC_FM_PCD_MAX_NUM_OF_CC_GROUPS];
+ /**< Parameters for each group. */
+ void *id; /**< Output parameter; Returns the tree Id to be used */
+} ioc_fm_pcd_cc_tree_params_t;
+
+/**
+ @Description Parameters for defining policer byte rate
+*/
+typedef struct ioc_fm_pcd_plcr_byte_rate_mode_param_t {
+ ioc_fm_pcd_plcr_frame_length_select frame_length_selection; /**< Frame length selection */
+ ioc_fm_pcd_plcr_roll_back_frame_select roll_back_frame_selection; /**< relevant option only e_IOC_FM_PCD_PLCR_L2_FRM_LEN,
+ e_IOC_FM_PCD_PLCR_FULL_FRM_LEN */
+} ioc_fm_pcd_plcr_byte_rate_mode_param_t;
+
+/**
+ @Description Parameters for defining the policer profile (based on
+ RFC-2698 or RFC-4115 attributes).
+*/
+typedef struct ioc_fm_pcd_plcr_non_passthrough_alg_param_t {
+ ioc_fm_pcd_plcr_rate_mode rate_mode; /**< Byte / Packet */
+ ioc_fm_pcd_plcr_byte_rate_mode_param_t byte_mode_param; /**< Valid for Byte NULL for Packet */
+ uint32_t committed_info_rate; /**< KBits/Sec or Packets/Sec */
+ uint32_t committed_burst_size; /**< KBits or Packets */
+ uint32_t peak_or_excess_info_rate; /**< KBits/Sec or Packets/Sec */
+ uint32_t peak_or_excess_burst_size; /**< KBits or Packets */
+} ioc_fm_pcd_plcr_non_passthrough_alg_param_t;
+
+/**
+ @Description Parameters for defining the next engine after policer
+*/
+typedef union ioc_fm_pcd_plcr_next_engine_params_u {
+ ioc_fm_pcd_done_action action; /**< Action - when next engine is BMI (done) */
+ void *p_profile; /**< Policer profile handle - used when next engine
+ is PLCR, must be a SHARED profile */
+ void *p_direct_scheme; /**< Direct scheme select - when next engine is Keygen */
+} ioc_fm_pcd_plcr_next_engine_params_u;
+
+typedef struct ioc_fm_pcd_port_params_t {
+ ioc_fm_port_type port_type; /**< Type of port for this profile */
+ uint8_t port_id; /**< FM-Port id of port for this profile */
+} ioc_fm_pcd_port_params_t;
+
+/**
+ @Description Parameters for defining the policer profile entry
+ (Must match struct ioc_fm_pcd_plcr_profile_params_t defined in fm_pcd_ext.h)
+*/
+struct fm_pcd_plcr_profile_params_t {
+ bool modify;
+ /**< TRUE to change an existing profile */
+ union {
+ struct {
+ ioc_fm_pcd_profile_type_selection profile_type;
+ /**< Type of policer profile */
+ ioc_fm_pcd_port_params_t *p_fm_port;
+ /**< Relevant for per-port profiles only */
+ uint16_t relative_profile_id;
+ /**< Profile id - relative to shared group or to port */
+ } new_params;
+ /**< Use it when modify = FALSE */
+ void *p_profile;
+ /**< A handle to a profile - use it when modify=TRUE */
+ } profile_select;
+ ioc_fm_pcd_plcr_algorithm_selection alg_selection;
+ /**< Profile Algorithm PASS_THROUGH, RFC_2698, RFC_4115 */
+ ioc_fm_pcd_plcr_color_mode color_mode;
+ /**< COLOR_BLIND, COLOR_AWARE */
+
+ union {
+ ioc_fm_pcd_plcr_color dflt_color;
+ /**< For Color-Blind Pass-Through mode;
+ the policer will re-color
+ any incoming packet with the default value. */
+ ioc_fm_pcd_plcr_color override;
+ /**< For Color-Aware modes; the profile response to a
+ pre-color value of 2'b11. */
+ } color;
+
+ ioc_fm_pcd_plcr_non_passthrough_alg_param_t
+ non_passthrough_alg_param;
+ /**< RFC2698 or RFC4115 parameters */
+
+ ioc_fm_pcd_engine next_engine_on_green;
+ /**< Next engine for green-colored frames */
+ ioc_fm_pcd_plcr_next_engine_params_u params_on_green;
+ /**< Next engine parameters for green-colored frames */
+
+ ioc_fm_pcd_engine next_engine_on_yellow;
+ /**< Next engine for yellow-colored frames */
+ ioc_fm_pcd_plcr_next_engine_params_u params_on_yellow;
+ /**< Next engine parameters for yellow-colored frames */
+
+ ioc_fm_pcd_engine next_engine_on_red;
+ /**< Next engine for red-colored frames */
+ ioc_fm_pcd_plcr_next_engine_params_u params_on_red;
+ /**< Next engine parameters for red-colored frames */
+
+ bool trap_profile_on_flow_A; /**< Obsolete - do not use */
+ bool trap_profile_on_flow_B; /**< Obsolete - do not use */
+ bool trap_profile_on_flow_C; /**< Obsolete - do not use */
+};
+
+typedef struct ioc_fm_pcd_plcr_profile_params_t {
+ struct fm_pcd_plcr_profile_params_t param;
+ void *id;
+ /**< output parameter; Returns the profile Id to be used */
+} ioc_fm_pcd_plcr_profile_params_t;
+
+/**
+ @Description A structure for modifying CC tree next engine
+*/
+typedef struct ioc_fm_pcd_cc_tree_modify_next_engine_params_t {
+ void *id; /**< CC tree Id to be used */
+ uint8_t grp_indx; /**< A Group index in the tree */
+ uint8_t indx; /**< Entry index in the group defined by grp_index */
+ ioc_fm_pcd_cc_next_engine_params_t cc_next_engine_params;
+ /**< Parameters for the next for the defined Key in the p_Key */
+} ioc_fm_pcd_cc_tree_modify_next_engine_params_t;
+
+/**
+ @Description A structure for modifying CC node next engine
+*/
+typedef struct ioc_fm_pcd_cc_node_modify_next_engine_params_t {
+ void *id; /**< CC node Id to be used */
+ uint16_t key_indx; /**< Key index for Next Engine Params modifications;
+ NOTE: This parameter is IGNORED for miss-key! */
+ uint8_t key_size; /**< Key size of added key */
+ ioc_fm_pcd_cc_next_engine_params_t cc_next_engine_params;
+ /**< parameters for the next for the defined Key in the p_Key */
+} ioc_fm_pcd_cc_node_modify_next_engine_params_t;
+
+/**
+ @Description A structure for remove CC node key
+*/
+typedef struct ioc_fm_pcd_cc_node_remove_key_params_t {
+ void *id; /**< CC node Id to be used */
+ uint16_t key_indx; /**< Key index for Next Engine Params modifications;
+ NOTE: This parameter is IGNORED for miss-key! */
+} ioc_fm_pcd_cc_node_remove_key_params_t;
+
+/**
+ @Description A structure for modifying CC node key and next engine
+*/
+typedef struct ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t {
+ void *id; /**< CC node Id to be used */
+ uint16_t key_indx; /**< Key index for Next Engine Params modifications;
+ NOTE: This parameter is IGNORED for miss-key! */
+ uint8_t key_size; /**< Key size of added key */
+ ioc_fm_pcd_cc_key_params_t key_params; /**< it's array with numOfKeys entries each entry in
+ the array of the type ioc_fm_pcd_cc_key_params_t */
+} ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t;
+
+/**
+ @Description A structure for modifying CC node key
+*/
+typedef struct ioc_fm_pcd_cc_node_modify_key_params_t {
+ void *id; /**< CC node Id to be used */
+ uint16_t key_indx; /**< Key index for Next Engine Params modifications;
+ NOTE: This parameter is IGNORED for miss-key! */
+ uint8_t key_size; /**< Key size of added key */
+ uint8_t *p_key; /**< Pointer to the key of the size defined in key_size */
+ uint8_t *p_mask; /**< Pointer to the Mask per key of the size defined
+ in keySize. p_Key and p_Mask (if defined) have to be
+ of the same size as defined in the key_size */
+} ioc_fm_pcd_cc_node_modify_key_params_t;
+
+/**
+ @Description A structure with the arguments for the FM_PCD_HashTableRemoveKey ioctl() call
+*/
+typedef struct ioc_fm_pcd_hash_table_remove_key_params_t {
+ void *p_hash_tbl; /**< The id of the hash table */
+ uint8_t key_size; /**< The size of the key to remove */
+ uint8_t *p_key; /**< Pointer to the key to remove */
+} ioc_fm_pcd_hash_table_remove_key_params_t;
+
+/**
+ @Description Parameters for selecting a location for requested manipulation
+*/
+typedef struct ioc_fm_manip_hdr_info_t {
+ ioc_net_header_type hdr; /**< Header selection */
+ ioc_fm_pcd_hdr_index hdr_index; /**< Relevant only for MPLS, VLAN and tunneled IP. Otherwise should be cleared. */
+ bool by_field; /**< TRUE if the location of manipulation is according to some field in the specific header*/
+ ioc_fm_pcd_fields_u full_field; /**< Relevant only when by_field = TRUE: Extract field */
+} ioc_fm_manip_hdr_info_t;
+
+/**
+ @Description Parameters for defining header removal by header type
+*/
+typedef struct ioc_fm_pcd_manip_hdr_rmv_by_hdr_params_t {
+ ioc_fm_pcd_manip_hdr_rmv_by_hdr_type type; /**< Selection of header removal location */
+ union {
+#if ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT))
+ struct {
+ bool include;/**< If FALSE, remove until the specified header (not including the header);
+ If TRUE, remove also the specified header. */
+ ioc_fm_manip_hdr_info_t hdr_info;
+ } from_start_by_hdr; /**< Relevant when type = e_IOC_FM_PCD_MANIP_RMV_BY_HDR_FROM_START */
+#endif /* FM_CAPWAP_SUPPORT */
+#if (DPAA_VERSION >= 11)
+ ioc_fm_manip_hdr_info_t hdr_info; /**< Relevant when type = e_FM_PCD_MANIP_RMV_BY_HDR_FROM_START */
+#endif /* (DPAA_VERSION >= 11) */
+ ioc_fm_pcd_manip_hdr_rmv_specific_l2 specific_l2;/**< Relevant when type = e_IOC_FM_PCD_MANIP_BY_HDR_SPECIFIC_L2;
+ Defines which L2 headers to remove. */
+ } u;
+} ioc_fm_pcd_manip_hdr_rmv_by_hdr_params_t;
+
+/**
+ @Description Parameters for configuring IP fragmentation manipulation
+*/
+typedef struct ioc_fm_pcd_manip_frag_ip_params_t {
+ uint16_t size_for_fragmentation; /**< If length of the frame is greater than this value,
+ IP fragmentation will be executed.*/
+#if DPAA_VERSION == 10
+ uint8_t scratch_bpid; /**< Absolute buffer pool id according to BM configuration.*/
+#endif /* DPAA_VERSION == 10 */
+ bool sg_bpid_en; /**< Enable a dedicated buffer pool id for the Scatter/Gather buffer allocation;
+ If disabled, the Scatter/Gather buffer will be allocated from the same pool as the
+ received frame's buffer. */
+ uint8_t sg_bpid; /**< Scatter/Gather buffer pool id;
+ This parameter is relevant when 'sg_bpid_en=TRUE';
+ Same LIODN number is used for these buffers as for the received frames buffers, so buffers
+ of this pool need to be allocated in the same memory area as the received buffers.
+ If the received buffers arrive from different sources, the Scatter/Gather BP id should be
+ mutual to all these sources. */
+ ioc_fm_pcd_manip_dont_frag_action dont_frag_action; /**< Dont Fragment Action - If an IP packet is larger
+ than MTU and its DF bit is set, then this field will
+ determine the action to be taken.*/
+} ioc_fm_pcd_manip_frag_ip_params_t;
+
+/**
+ @Description Parameters for configuring IP reassembly manipulation.
+
+ This is a common structure for both IPv4 and IPv6 reassembly
+ manipulation. For reassembly of both IPv4 and IPv6, make sure to
+ set the 'hdr' field in ioc_fm_pcd_manip_reassem_params_t to IOC_HEADER_TYPE_IPv6.
+*/
+typedef struct ioc_fm_pcd_manip_reassem_ip_params_t {
+ uint8_t relative_scheme_id[2]; /**< Partition relative scheme id:
+ relativeSchemeId[0] - Relative scheme ID for IPV4 Reassembly manipulation;
+ relativeSchemeId[1] - Relative scheme ID for IPV6 Reassembly manipulation;
+ NOTE: The following comment is relevant only for FMAN v2 devices:
+ Relative scheme ID for IPv4/IPv6 Reassembly manipulation must be smaller than
+ the user schemes id to ensure that the reassembly's schemes will be first match.
+ The remaining schemes, if defined, should have higher relative scheme ID. */
+#if DPAA_VERSION >= 11
+ uint32_t non_consistent_sp_fqid; /**< In case that other fragments of the frame corresponds to different storage
+ profile than the opening fragment (Non-Consistent-SP state)
+ then one of two possible scenarios occurs:
+ if 'nonConsistentSpFqid != 0', the reassembled frame will be enqueued to
+ this fqid, otherwise a 'Non Consistent SP' bit will be set in the FD[status].*/
+#else
+ uint8_t sg_bpid; /**< Buffer pool id for the S/G frame created by the reassembly process */
+#endif /* DPAA_VERSION >= 11 */
+ uint8_t data_mem_id; /**< Memory partition ID for the IPR's external tables structure */
+ uint16_t data_liodn_offset; /**< LIODN offset for access the IPR's external tables structure. */
+ uint16_t min_frag_size[2]; /**< Minimum fragment size:
+ minFragSize[0] - for ipv4, minFragSize[1] - for ipv6 */
+ ioc_fm_pcd_manip_reassem_ways_number num_of_frames_per_hash_entry[2];
+ /**< Number of frames per hash entry needed for reassembly process:
+ numOfFramesPerHashEntry[0] - for ipv4 (max value is e_IOC_FM_PCD_MANIP_EIGHT_WAYS_HASH);
+ numOfFramesPerHashEntry[1] - for ipv6 (max value is e_IOC_FM_PCD_MANIP_SIX_WAYS_HASH). */
+ uint16_t max_num_frames_in_process;/**< Number of frames which can be processed by Reassembly in the same time;
+ Must be power of 2;
+ In the case numOfFramesPerHashEntry == e_IOC_FM_PCD_MANIP_FOUR_WAYS_HASH,
+ maxNumFramesInProcess has to be in the range of 4 - 512;
+ In the case numOfFramesPerHashEntry == e_IOC_FM_PCD_MANIP_EIGHT_WAYS_HASH,
+ maxNumFramesInProcess has to be in the range of 8 - 2048. */
+ ioc_fm_pcd_manip_reassem_time_out_mode time_out_mode; /**< Expiration delay initialized by Reassembly process */
+ uint32_t fqid_for_time_out_frames;/**< FQID in which time out frames will enqueue during Time Out Process */
+ uint32_t timeout_threshold_for_reassm_process;
+ /**< Represents the time interval in microseconds which defines
+ if opened frame (at least one fragment was processed but not all the fragments)is found as too old*/
+} ioc_fm_pcd_manip_reassem_ip_params_t;
+
+/**
+ @Description Parameters for defining IPSEC manipulation
+*/
+typedef struct ioc_fm_pcd_manip_special_offload_ipsec_params_t {
+ bool decryption; /**< TRUE if being used in decryption direction;
+ FALSE if being used in encryption direction. */
+ bool ecn_copy; /**< TRUE to copy the ECN bits from inner/outer to outer/inner
+ (direction depends on the 'decryption' field). */
+ bool dscp_copy; /**< TRUE to copy the DSCP bits from inner/outer to outer/inner
+ (direction depends on the 'decryption' field). */
+ bool variable_ip_hdr_len; /**< TRUE for supporting variable IP header length in decryption. */
+ bool variable_ip_version; /**< TRUE for supporting both IP version on the same SA in encryption */
+ uint8_t outer_ip_hdr_len; /**< If 'variable_ip_version == TRUE' than this field must be set to non-zero value;
+ It is specifies the length of the outer IP header that was configured in the
+ corresponding SA. */
+ uint16_t arw_size; /**< if <> '0' then will perform ARW check for this SA;
+ The value must be a multiplication of 16 */
+ void *arw_addr; /**< if arwSize <> '0' then this field must be set to non-zero value;
+ MUST be allocated from FMAN's MURAM that the post-sec op-port belong
+ Must be 4B aligned. Required MURAM size is '(NEXT_POWER_OF_2(arwSize+32))/8+4' Bytes */
+} ioc_fm_pcd_manip_special_offload_ipsec_params_t;
+
+#if (DPAA_VERSION >= 11)
+/**
+ @Description Parameters for configuring CAPWAP fragmentation manipulation
+
+ Restrictions:
+ - Maximum number of fragments per frame is 16.
+ - Transmit confirmation is not supported.
+ - Fragmentation nodes must be set as the last PCD action (i.e. the
+ corresponding CC node key must have next engine set to e_FM_PCD_DONE).
+ - Only BMan buffers shall be used for frames to be fragmented.
+ - NOTE: The following comment is relevant only for FMAN v3 devices: IPF
+ does not support VSP. Therefore, on the same port where we have IPF we
+ cannot support VSP.
+*/
+typedef struct ioc_fm_pcd_manip_frag_capwap_params_t {
+ uint16_t size_for_fragmentation; /**< If length of the frame is greater than this value,
+ CAPWAP fragmentation will be executed.*/
+ bool sg_bpid_en; /**< Enable a dedicated buffer pool id for the Scatter/Gather buffer allocation;
+ If disabled, the Scatter/Gather buffer will be allocated from the same pool as the
+ received frame's buffer. */
+ uint8_t sg_bpid; /**< Scatter/Gather buffer pool id;
+ This parameters is relevant when 'sgBpidEn=TRUE';
+ Same LIODN number is used for these buffers as for the received frames buffers, so buffers
+ of this pool need to be allocated in the same memory area as the received buffers.
+ If the received buffers arrive from different sources, the Scatter/Gather BP id should be
+ mutual to all these sources. */
+ bool compress_mode_en; /**< CAPWAP Header Options Compress Enable mode;
+ When this mode is enabled then only the first fragment include the CAPWAP header options
+ field (if user provides it in the input frame) and all other fragments exclude the CAPWAP
+ options field (CAPWAP header is updated accordingly).*/
+} ioc_fm_pcd_manip_frag_capwap_params_t;
+
+/**
+ @Description Parameters for configuring CAPWAP reassembly manipulation.
+
+ Restrictions:
+ - Application must define one scheme to catch the reassembled frames.
+ - Maximum number of fragments per frame is 16.
+
+*/
+typedef struct ioc_fm_pcd_manip_reassem_capwap_params_t {
+ uint8_t relative_scheme_id; /**< Partition relative scheme id;
+ NOTE: this id must be smaller than the user schemes id to ensure that the reassembly scheme will be first match;
+ Rest schemes, if defined, should have higher relative scheme ID. */
+ uint8_t data_mem_id; /**< Memory partition ID for the IPR's external tables structure */
+ uint16_t data_liodn_offset; /**< LIODN offset for access the IPR's external tables structure. */
+ uint16_t max_reassembled_frame_length;/**< The maximum CAPWAP reassembled frame length in bytes;
+ If maxReassembledFrameLength == 0, any successful reassembled frame length is
+ considered as a valid length;
+ if maxReassembledFrameLength > 0, a successful reassembled frame which its length
+ exceeds this value is considered as an error frame (FD status[CRE] bit is set). */
+ ioc_fm_pcd_manip_reassem_ways_number num_of_frames_per_hash_entry;
+ /**< Number of frames per hash entry needed for reassembly process */
+ uint16_t max_num_frames_in_process; /**< Number of frames which can be processed by reassembly in the same time;
+ Must be power of 2;
+ In the case numOfFramesPerHashEntry == e_FM_PCD_MANIP_FOUR_WAYS_HASH,
+ maxNumFramesInProcess has to be in the range of 4 - 512;
+ In the case numOfFramesPerHashEntry == e_FM_PCD_MANIP_EIGHT_WAYS_HASH,
+ maxNumFramesInProcess has to be in the range of 8 - 2048. */
+ ioc_fm_pcd_manip_reassem_time_out_mode time_out_mode; /**< Expiration delay initialized by Reassembly process */
+ uint32_t fqid_for_time_out_frames; /**< FQID in which time out frames will enqueue during Time Out Process;
+ Recommended value for this field is 0; in this way timed-out frames will be discarded */
+ uint32_t timeout_threshold_for_reassm_process;
+ /**< Represents the time interval in microseconds which defines
+ if opened frame (at least one fragment was processed but not all the fragments)is found as too old*/
+} ioc_fm_pcd_manip_reassem_capwap_params_t;
+
+/**
+ @Description structure for defining CAPWAP manipulation
+*/
+typedef struct ioc_fm_pcd_manip_special_offload_capwap_params_t {
+ bool dtls; /**< TRUE if continue to SEC DTLS encryption */
+ ioc_fm_pcd_manip_hdr_qos_src qos_src; /**< TODO */
+} ioc_fm_pcd_manip_special_offload_capwap_params_t;
+
+#endif /* (DPAA_VERSION >= 11) */
+
+/**
+ @Description Parameters for defining special offload manipulation
+*/
+typedef struct ioc_fm_pcd_manip_special_offload_params_t {
+ ioc_fm_pcd_manip_special_offload_type type;
+ /**< Type of special offload manipulation */
+ union {
+ ioc_fm_pcd_manip_special_offload_ipsec_params_t ipsec;
+ /**< Parameters for IPSec; Relevant when type = e_IOC_FM_PCD_MANIP_SPECIAL_OFFLOAD_IPSEC */
+
+ ioc_fm_pcd_manip_special_offload_capwap_params_t capwap;
+ /**< Parameters for CAPWAP; Relevant when type = e_FM_PCD_MANIP_SPECIAL_OFFLOAD_CAPWAP */
+ } u;
+} ioc_fm_pcd_manip_special_offload_params_t;
+
+/**
+ @Description Parameters for defining generic removal manipulation
+*/
+typedef struct ioc_fm_pcd_manip_hdr_rmv_generic_params_t {
+ uint8_t offset;
+ /**< Offset from beginning of header to the start location of the removal */
+ uint8_t size; /**< Size of removed section */
+} ioc_fm_pcd_manip_hdr_rmv_generic_params_t;
+
+/**
+ @Description Parameters for defining insertion manipulation
+*/
+typedef struct ioc_fm_pcd_manip_hdr_insrt_t {
+ uint8_t size; /**< size of inserted section */
+ uint8_t *p_data; /**< data to be inserted */
+} ioc_fm_pcd_manip_hdr_insrt_t;
+
+/**
+ @Description Parameters for defining generic insertion manipulation
+*/
+typedef struct ioc_fm_pcd_manip_hdr_insrt_generic_params_t {
+ uint8_t offset; /**< Offset from beginning of header to the start
+ location of the insertion */
+ uint8_t size; /**< Size of inserted section */
+ bool replace; /**< TRUE to override (replace) existing data at
+ 'offset', FALSE to insert */
+ uint8_t *p_data; /**< Pointer to data to be inserted */
+} ioc_fm_pcd_manip_hdr_insrt_generic_params_t;
+
+/**
+ @Description Parameters for defining header manipulation VLAN DSCP To Vpri translation
+*/
+typedef struct ioc_fm_pcd_manip_hdr_field_update_vlan_dscp_to_vpri_t {
+ uint8_t dscp_to_vpri_table[IOC_FM_PCD_MANIP_DSCP_TO_VLAN_TRANS];
+ /**< A table of VPri values for each DSCP value;
+ The index is the D_SCP value (0-0x3F) and the
+ value is the corresponding VPRI (0-15). */
+ uint8_t vpri_def_val;
+ /**< 0-7, Relevant only if if update_type =
+ e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_DSCP_TO_VLAN,
+ this field is the Q Tag default value if the IP header is not found. */
+} ioc_fm_pcd_manip_hdr_field_update_vlan_dscp_to_vpri_t;
+
+/**
+ @Description Parameters for defining header manipulation VLAN fields updates
+*/
+typedef struct ioc_fm_pcd_manip_hdr_field_update_vlan_t {
+ ioc_fm_pcd_manip_hdr_field_update_vlan update_type; /**< Selects VLAN update type */
+ union {
+ uint8_t vpri; /**< 0-7, Relevant only if If update_type =
+ e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_VLAN_PRI, this
+ is the new VLAN pri. */
+ ioc_fm_pcd_manip_hdr_field_update_vlan_dscp_to_vpri_t dscp_to_vpri;
+ /**< Parameters structure, Relevant only if update_type =
+ e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_DSCP_TO_VLAN. */
+ } u;
+} ioc_fm_pcd_manip_hdr_field_update_vlan_t;
+
+/**
+ @Description Parameters for defining header manipulation IPV4 fields updates
+*/
+typedef struct ioc_fm_pcd_manip_hdr_field_update_ipv4_t {
+ ioc_ipv4_hdr_manip_update_flags_t valid_updates; /**< ORed flag, selecting the required updates */
+ uint8_t tos; /**< 8 bit New TOS; Relevant if valid_updates contains
+ IOC_HDR_MANIP_IPV4_TOS */
+ uint16_t id; /**< 16 bit New IP ID; Relevant only if valid_updates
+ contains IOC_HDR_MANIP_IPV4_ID */
+ uint32_t src; /**< 32 bit New IP SRC; Relevant only if valid_updates
+ contains IOC_HDR_MANIP_IPV4_SRC */
+ uint32_t dst; /**< 32 bit New IP DST; Relevant only if valid_updates
+ contains IOC_HDR_MANIP_IPV4_DST */
+} ioc_fm_pcd_manip_hdr_field_update_ipv4_t;
+
+/**
+ @Description Parameters for defining header manipulation IPV6 fields updates
+*/
+typedef struct ioc_fm_pcd_manip_hdr_field_update_ipv6_t {
+ ioc_ipv6_hdr_manip_update_flags_t valid_updates; /**< ORed flag, selecting the required updates */
+ uint8_t traffic_class; /**< 8 bit New Traffic Class; Relevant if valid_updates contains
+ IOC_HDR_MANIP_IPV6_TC */
+ uint8_t src[IOC_NET_HF_IPv6_ADDR_SIZE];
+ /**< 16 byte new IP SRC; Relevant only if valid_updates
+ contains IOC_HDR_MANIP_IPV6_SRC */
+ uint8_t dst[IOC_NET_HF_IPv6_ADDR_SIZE];
+ /**< 16 byte new IP DST; Relevant only if valid_updates
+ contains IOC_HDR_MANIP_IPV6_DST */
+} ioc_fm_pcd_manip_hdr_field_update_ipv6_t;
+
+/**
+ @Description Parameters for defining header manipulation TCP/UDP fields updates
+*/
+typedef struct ioc_fm_pcd_manip_hdr_field_update_tcp_udp_t {
+ ioc_tcp_udp_hdr_manip_update_flags_t valid_updates; /**< ORed flag, selecting the required updates */
+ uint16_t src; /**< 16 bit New TCP/UDP SRC; Relevant only if valid_updates
+ contains IOC_HDR_MANIP_TCP_UDP_SRC */
+ uint16_t dst; /**< 16 bit New TCP/UDP DST; Relevant only if valid_updates
+ contains IOC_HDR_MANIP_TCP_UDP_DST */
+} ioc_fm_pcd_manip_hdr_field_update_tcp_udp_t;
+
+/**
+ @Description Parameters for defining header manipulation fields updates
+*/
+typedef struct ioc_fm_pcd_manip_hdr_field_update_params_t {
+ ioc_fm_pcd_manip_hdr_field_update_type type; /**< Type of header field update manipulation */
+ union {
+ ioc_fm_pcd_manip_hdr_field_update_vlan_t vlan; /**< Parameters for VLAN update. Relevant when
+ type = e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_VLAN */
+ ioc_fm_pcd_manip_hdr_field_update_ipv4_t ipv4; /**< Parameters for IPv4 update. Relevant when
+ type = e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_IPV4 */
+ ioc_fm_pcd_manip_hdr_field_update_ipv6_t ipv6; /**< Parameters for IPv6 update. Relevant when
+ type = e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_IPV6 */
+ ioc_fm_pcd_manip_hdr_field_update_tcp_udp_t tcp_udp;/**< Parameters for TCP/UDP update. Relevant when
+ type = e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_TCP_UDP */
+ } u;
+} ioc_fm_pcd_manip_hdr_field_update_params_t;
+
+/**
+ @Description Parameters for defining custom header manipulation for IP replacement
+*/
+typedef struct ioc_fm_pcd_manip_hdr_custom_ip_hdr_replace_t {
+ ioc_fm_pcd_manip_hdr_custom_ip_replace replace_type; /**< Selects replace update type */
+ bool dec_ttl_hl; /**< Decrement TTL (IPV4) or Hop limit (IPV6) by 1 */
+ bool update_ipv4_id; /**< Relevant when replace_type =
+ e_IOC_FM_PCD_MANIP_HDR_CUSTOM_REPLACE_IPV6_BY_IPV4 */
+ uint16_t id; /**< 16 bit New IP ID; Relevant only if
+ update_ipv4_id = TRUE */
+ uint8_t hdr_size; /**< The size of the new IP header */
+ uint8_t hdr[IOC_FM_PCD_MANIP_MAX_HDR_SIZE]; /**< The new IP header */
+} ioc_fm_pcd_manip_hdr_custom_ip_hdr_replace_t;
+
+/**
+ @Description Parameters for defining custom header manipulation
+*/
+typedef struct ioc_fm_pcd_manip_hdr_custom_params_t {
+ ioc_fm_pcd_manip_hdr_custom_type type;
+ /**< Type of header field update manipulation */
+ union {
+ ioc_fm_pcd_manip_hdr_custom_ip_hdr_replace_t ip_hdr_replace;
+ /**< Parameters IP header replacement */
+ } u;
+} ioc_fm_pcd_manip_hdr_custom_params_t;
+
+/**
+ @Description Parameters for defining specific L2 insertion manipulation
+*/
+typedef struct ioc_fm_pcd_manip_hdr_insrt_specific_l2_params_t {
+ ioc_fm_pcd_manip_hdr_insrt_specific_l2 specific_l2; /**< Selects which L2 headers to insert */
+ bool update; /**< TRUE to update MPLS header */
+ uint8_t size; /**< size of inserted section */
+ uint8_t *p_data; /**< data to be inserted */
+} ioc_fm_pcd_manip_hdr_insrt_specific_l2_params_t;
+
+#if (DPAA_VERSION >= 11)
+/**
+ @Description Parameters for defining IP insertion manipulation
+*/
+typedef struct ioc_fm_pcd_manip_hdr_insrt_ip_params_t {
+ bool calc_l4_checksum; /**< Calculate L4 checksum. */
+ ioc_fm_pcd_manip_hdr_qos_mapping_mode mapping_mode; /**< TODO */
+ uint8_t last_pid_offset; /**< the offset of the last Protocol within
+ the inserted header */
+ uint16_t id; /**< 16 bit New IP ID */
+ bool dont_frag_overwrite;
+ /**< IPv4 only. DF is overwritten with the hash-result next-to-last byte.
+ * This byte is configured to be overwritten when RPD is set. */
+ uint8_t last_dst_offset;
+ /**< IPv6 only. if routing extension exist, user should set the offset of the destination address
+ * in order to calculate UDP checksum pseudo header;
+ * Otherwise set it to '0'. */
+ ioc_fm_pcd_manip_hdr_insrt_t insrt; /**< size and data to be inserted. */
+} ioc_fm_pcd_manip_hdr_insrt_ip_params_t;
+#endif /* (DPAA_VERSION >= 11) */
+
+/**
+ @Description Parameters for defining header insertion manipulation by header type
+*/
+typedef struct ioc_fm_pcd_manip_hdr_insrt_by_hdr_params_t {
+ ioc_fm_pcd_manip_hdr_insrt_by_hdr_type type; /**< Selects manipulation type */
+ union {
+ ioc_fm_pcd_manip_hdr_insrt_specific_l2_params_t specific_l2_params;
+ /**< Used when type = e_IOC_FM_PCD_MANIP_INSRT_BY_HDR_SPECIFIC_L2:
+ Selects which L2 headers to remove */
+#if (DPAA_VERSION >= 11)
+ ioc_fm_pcd_manip_hdr_insrt_ip_params_t ip_params; /**< Used when type = e_FM_PCD_MANIP_INSRT_BY_HDR_IP */
+ ioc_fm_pcd_manip_hdr_insrt_t insrt; /**< Used when type is one of e_FM_PCD_MANIP_INSRT_BY_HDR_UDP,
+ e_FM_PCD_MANIP_INSRT_BY_HDR_UDP_LITE, or
+ e_FM_PCD_MANIP_INSRT_BY_HDR_CAPWAP */
+#endif /* (DPAA_VERSION >= 11) */
+ } u;
+} ioc_fm_pcd_manip_hdr_insrt_by_hdr_params_t;
+
+/**
+ @Description Parameters for defining header insertion manipulation
+*/
+typedef struct ioc_fm_pcd_manip_hdr_insrt_params_t {
+ ioc_fm_pcd_manip_hdr_insrt_type type; /**< Type of insertion manipulation */
+ union {
+ ioc_fm_pcd_manip_hdr_insrt_by_hdr_params_t by_hdr; /**< Parameters for defining header insertion manipulation by header type,
+ relevant if 'type' = e_IOC_FM_PCD_MANIP_INSRT_BY_HDR */
+ ioc_fm_pcd_manip_hdr_insrt_generic_params_t generic;/**< Parameters for defining generic header insertion manipulation,
+ relevant if type = e_IOC_FM_PCD_MANIP_INSRT_GENERIC */
+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
+ ioc_fm_pcd_manip_hdr_insrt_by_template_params_t by_template;
+ /**< Parameters for defining header insertion manipulation by template,
+ relevant if 'type' = e_IOC_FM_PCD_MANIP_INSRT_BY_TEMPLATE */
+#endif /* FM_CAPWAP_SUPPORT */
+ } u;
+} ioc_fm_pcd_manip_hdr_insrt_params_t;
+
+/**
+ @Description Parameters for defining header removal manipulation
+*/
+typedef struct ioc_fm_pcd_manip_hdr_rmv_params_t {
+ ioc_fm_pcd_manip_hdr_rmv_type type; /**< Type of header removal manipulation */
+ union {
+ ioc_fm_pcd_manip_hdr_rmv_by_hdr_params_t by_hdr; /**< Parameters for defining header removal manipulation by header type,
+ relevant if type = e_IOC_FM_PCD_MANIP_RMV_BY_HDR */
+ ioc_fm_pcd_manip_hdr_rmv_generic_params_t generic; /**< Parameters for defining generic header removal manipulation,
+ relevant if type = e_IOC_FM_PCD_MANIP_RMV_GENERIC */
+ } u;
+} ioc_fm_pcd_manip_hdr_rmv_params_t;
+
+/**
+ @Description Parameters for defining header manipulation node
+*/
+typedef struct ioc_fm_pcd_manip_hdr_params_t {
+ bool rmv; /**< TRUE, to define removal manipulation */
+ ioc_fm_pcd_manip_hdr_rmv_params_t rmv_params; /**< Parameters for removal manipulation, relevant if 'rmv' = TRUE */
+
+ bool insrt; /**< TRUE, to define insertion manipulation */
+ ioc_fm_pcd_manip_hdr_insrt_params_t insrt_params; /**< Parameters for insertion manipulation, relevant if 'insrt' = TRUE */
+
+ bool field_update; /**< TRUE, to define field update manipulation */
+ ioc_fm_pcd_manip_hdr_field_update_params_t field_update_params; /**< Parameters for field update manipulation, relevant if 'fieldUpdate' = TRUE */
+
+ bool custom; /**< TRUE, to define custom manipulation */
+ ioc_fm_pcd_manip_hdr_custom_params_t custom_params; /**< Parameters for custom manipulation, relevant if 'custom' = TRUE */
+
+ bool dont_parse_after_manip;/**< FALSE to activate the parser a second time after
+ completing the manipulation on the frame */
+} ioc_fm_pcd_manip_hdr_params_t;
+
+/**
+ @Description structure for defining fragmentation manipulation
+*/
+typedef struct ioc_fm_pcd_manip_frag_params_t {
+ ioc_net_header_type hdr; /**< Header selection */
+ union {
+#if (DPAA_VERSION >= 11)
+ ioc_fm_pcd_manip_frag_capwap_params_t capwap_frag; /**< Parameters for defining CAPWAP fragmentation,
+ relevant if 'hdr' = HEADER_TYPE_CAPWAP */
+#endif /* (DPAA_VERSION >= 11) */
+ ioc_fm_pcd_manip_frag_ip_params_t ip_frag; /**< Parameters for defining IP fragmentation,
+ relevant if 'hdr' = HEADER_TYPE_Ipv4 or HEADER_TYPE_Ipv6 */
+ } u;
+} ioc_fm_pcd_manip_frag_params_t;
+
+/**
+ @Description structure for defining reassemble manipulation
+*/
+typedef struct ioc_fm_pcd_manip_reassem_params_t {
+ ioc_net_header_type hdr; /**< Header selection */
+ union {
+#if (DPAA_VERSION >= 11)
+ ioc_fm_pcd_manip_reassem_capwap_params_t capwap_reassem; /**< Parameters for defining CAPWAP reassembly,
+ relevant if 'hdr' = HEADER_TYPE_CAPWAP */
+#endif /* (DPAA_VERSION >= 11) */
+ ioc_fm_pcd_manip_reassem_ip_params_t ip_reassem; /**< Parameters for defining IP reassembly,
+ relevant if 'hdr' = HEADER_TYPE_Ipv4 or HEADER_TYPE_Ipv6 */
+ } u;
+} ioc_fm_pcd_manip_reassem_params_t;
+
+/**
+ @Description Parameters for defining a manipulation node
+*/
+struct fm_pcd_manip_params_t {
+ ioc_fm_pcd_manip_type type;
+ /**< Selects type of manipulation node */
+ union {
+ ioc_fm_pcd_manip_hdr_params_t hdr;
+ /**< Parameters for defining header manipulation node */
+ ioc_fm_pcd_manip_reassem_params_t reassem;
+ /**< Parameters for defining reassembly manipulation node */
+ ioc_fm_pcd_manip_frag_params_t frag;
+ /**< Parameters for defining fragmentation manipulation node */
+ ioc_fm_pcd_manip_special_offload_params_t special_offload;
+ /**< Parameters for defining special offload manipulation node */
+ } u;
+ void *p_next_manip;
+ /**< Handle to another (previously defined) manipulation node;
+ Allows concatenation of manipulation actions
+ This parameter is optional and may be NULL. */
+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
+ bool frag_or_reasm;
+ /**< TRUE, if defined fragmentation/reassembly manipulation */
+ ioc_fm_pcd_manip_frag_or_reasm_params_t
+ frag_or_reasm_params;
+ /**< Parameters for fragmentation/reassembly manipulation,
+ relevant if frag_or_reasm = TRUE */
+#endif /* FM_CAPWAP_SUPPORT */
+};
+
+typedef struct ioc_fm_pcd_manip_params_t {
+ struct fm_pcd_manip_params_t param;
+ void *id;
+} ioc_fm_pcd_manip_params_t;
+
+/**
+ @Description Structure for retrieving IP reassembly statistics
+*/
+typedef struct ioc_fm_pcd_manip_reassem_ip_stats_t {
+ /* common counters for both IPv4 and IPv6 */
+ uint32_t timeout; /**< Counts the number of TimeOut occurrences */
+ uint32_t rfd_pool_busy; /**< Counts the number of failed attempts to allocate
+ a Reassembly Frame Descriptor */
+ uint32_t internal_buffer_busy; /**< Counts the number of times an internal buffer busy occurred */
+ uint32_t external_buffer_busy; /**< Counts the number of times external buffer busy occurred */
+ uint32_t sg_fragments; /**< Counts the number of Scatter/Gather fragments */
+ uint32_t dma_semaphore_depletion; /**< Counts the number of failed attempts to allocate a DMA semaphore */
+#if (DPAA_VERSION >= 11)
+ uint32_t non_consistent_sp; /**< Counts the number of Non Consistent Storage Profile events for
+ successfully reassembled frames */
+#endif /* (DPAA_VERSION >= 11) */
+struct {
+ uint32_t successfully_reassembled; /**< Counts the number of successfully reassembled frames */
+ uint32_t valid_fragments; /**< Counts the total number of valid fragments that
+ have been processed for all frames */
+ uint32_t processed_fragments; /**< Counts the number of processed fragments
+ (valid and error fragments) for all frames */
+ uint32_t malformed_fragments; /**< Counts the number of malformed fragments processed for all frames */
+ uint32_t discarded_fragments; /**< Counts the number of fragments discarded by the reassembly process */
+ uint32_t auto_learn_busy; /**< Counts the number of times a busy condition occurs when attempting
+ to access an IP-Reassembly Automatic Learning Hash set */
+ uint32_t more_than16fragments; /**< Counts the fragment occurrences in which the number of fragments-per-frame
+ exceeds 16 */
+ } specific_hdr_statistics[2]; /**< slot '0' is for IPv4, slot '1' is for IPv6 */
+} ioc_fm_pcd_manip_reassem_ip_stats_t;
+
+/**
+ @Description Structure for retrieving IP fragmentation statistics
+*/
+typedef struct ioc_fm_pcd_manip_frag_ip_stats_t {
+ uint32_t total_frames; /**< Number of frames that passed through the manipulation node */
+ uint32_t fragmented_frames; /**< Number of frames that were fragmented */
+ uint32_t generated_fragments; /**< Number of fragments that were generated */
+} ioc_fm_pcd_manip_frag_ip_stats_t;
+
+#if (DPAA_VERSION >= 11)
+/**
+ @Description Structure for retrieving CAPWAP reassembly statistics
+*/
+typedef struct ioc_fm_pcd_manip_reassem_capwap_stats_t {
+ uint32_t timeout; /**< Counts the number of timeout occurrences */
+ uint32_t rfd_pool_busy; /**< Counts the number of failed attempts to allocate
+ a Reassembly Frame Descriptor */
+ uint32_t internal_buffer_busy; /**< Counts the number of times an internal buffer busy occurred */
+ uint32_t external_buffer_busy; /**< Counts the number of times external buffer busy occurred */
+ uint32_t sg_fragments; /**< Counts the number of Scatter/Gather fragments */
+ uint32_t dma_semaphore_depletion; /**< Counts the number of failed attempts to allocate a DMA semaphore */
+ uint32_t successfully_reassembled; /**< Counts the number of successfully reassembled frames */
+ uint32_t valid_fragments; /**< Counts the total number of valid fragments that
+ have been processed for all frames */
+ uint32_t processed_fragments; /**< Counts the number of processed fragments
+ (valid and error fragments) for all frames */
+ uint32_t malformed_fragments; /**< Counts the number of malformed fragments processed for all frames */
+ uint32_t autoLearn_busy; /**< Counts the number of times a busy condition occurs when attempting
+ to access an Reassembly Automatic Learning Hash set */
+ uint32_t discarded_fragments; /**< Counts the number of fragments discarded by the reassembly process */
+ uint32_t more_than16fragments; /**< Counts the fragment occurrences in which the number of fragments-per-frame
+ exceeds 16 */
+ uint32_t exceed_max_reassembly_frame_len;/**< ounts the number of times that a successful reassembled frame
+ length exceeds MaxReassembledFrameLength value */
+} ioc_fm_pcd_manip_reassem_capwap_stats_t;
+
+/**
+ @Description Structure for retrieving CAPWAP fragmentation statistics
+*/
+typedef struct ioc_fm_pcd_manip_frag_capwap_stats_t {
+ uint32_t total_frames; /**< Number of frames that passed through the manipulation node */
+ uint32_t fragmented_frames; /**< Number of frames that were fragmented */
+ uint32_t generated_fragments; /**< Number of fragments that were generated */
+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
+ uint8_t sg_allocation_failure; /**< Number of allocation failure of s/g buffers */
+#endif /* (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0)) */
+} ioc_fm_pcd_manip_frag_capwap_stats_t;
+#endif /* (DPAA_VERSION >= 11) */
+
+/**
+ @Description Structure for retrieving reassembly statistics
+*/
+typedef struct ioc_fm_pcd_manip_reassem_stats_t {
+ union {
+ ioc_fm_pcd_manip_reassem_ip_stats_t ip_reassem; /**< Structure for IP reassembly statistics */
+#if (DPAA_VERSION >= 11)
+ ioc_fm_pcd_manip_reassem_capwap_stats_t capwap_reassem; /**< Structure for CAPWAP reassembly statistics */
+#endif /* (DPAA_VERSION >= 11) */
+ } u;
+} ioc_fm_pcd_manip_reassem_stats_t;
+
+/**
+ @Description structure for retrieving fragmentation statistics
+*/
+typedef struct ioc_fm_pcd_manip_frag_stats_t {
+ union {
+ ioc_fm_pcd_manip_frag_ip_stats_t ip_frag; /**< Structure for IP fragmentation statistics */
+#if (DPAA_VERSION >= 11)
+ ioc_fm_pcd_manip_frag_capwap_stats_t capwap_frag; /**< Structure for CAPWAP fragmentation statistics */
+#endif /* (DPAA_VERSION >= 11) */
+ } u;
+} ioc_fm_pcd_manip_frag_stats_t;
+
+/**
+ @Description structure for defining manipulation statistics
+*/
+typedef struct ioc_fm_pcd_manip_stats_t {
+ union {
+ ioc_fm_pcd_manip_reassem_stats_t reassem; /**< Structure for reassembly statistics */
+ ioc_fm_pcd_manip_frag_stats_t frag; /**< Structure for fragmentation statistics */
+ } u;
+} ioc_fm_pcd_manip_stats_t;
+
+/**
+ @Description Parameters for acquiring manipulation statistics
+*/
+typedef struct ioc_fm_pcd_manip_get_stats_t {
+ void *id;
+ ioc_fm_pcd_manip_stats_t stats;
+} ioc_fm_pcd_manip_get_stats_t;
+
+#if DPAA_VERSION >= 11
+/**
+ @Description Parameters for defining frame replicator group and its members
+*/
+struct fm_pcd_frm_replic_group_params_t {
+ uint8_t max_num_of_entries; /**< Maximal number of members in the group - must be at least two */
+ uint8_t num_of_entries; /**< Number of members in the group - must be at least 1 */
+ ioc_fm_pcd_cc_next_engine_params_t next_engine_params[IOC_FM_PCD_FRM_REPLIC_MAX_NUM_OF_ENTRIES];
+ /**< Array of members' parameters */
+};
+
+typedef struct ioc_fm_pcd_frm_replic_group_params_t {
+ struct fm_pcd_frm_replic_group_params_t param;
+ void *id;
+} ioc_fm_pcd_frm_replic_group_params_t;
+
+typedef struct ioc_fm_pcd_frm_replic_member_t {
+ void *h_replic_group;
+ uint16_t member_index;
+} ioc_fm_pcd_frm_replic_member_t;
+
+typedef struct ioc_fm_pcd_frm_replic_member_params_t {
+ ioc_fm_pcd_frm_replic_member_t member;
+ ioc_fm_pcd_cc_next_engine_params_t next_engine_params;
+} ioc_fm_pcd_frm_replic_member_params_t;
+#endif /* DPAA_VERSION >= 11 */
+
+
+typedef struct ioc_fm_pcd_cc_key_statistics_t {
+ uint32_t byte_count; /**< This counter reflects byte count of frames that
+ were matched by this key. */
+ uint32_t frame_count; /**< This counter reflects count of frames that
+ were matched by this key. */
+#if (DPAA_VERSION >= 11)
+ uint32_t frame_length_range_count[IOC_FM_PCD_CC_STATS_MAX_NUM_OF_FLR];
+ /**< These counters reflect how many frames matched
+ this key in 'RMON' statistics mode:
+ Each counter holds the number of frames of a
+ specific frames length range, according to the
+ ranges provided at initialization. */
+#endif /* (DPAA_VERSION >= 11) */
+} ioc_fm_pcd_cc_key_statistics_t;
+
+
+typedef struct ioc_fm_pcd_cc_tbl_get_stats_t {
+ void *id;
+ uint16_t key_index;
+ ioc_fm_pcd_cc_key_statistics_t statistics;
+} ioc_fm_pcd_cc_tbl_get_stats_t;
+
+/**
+ @Function FM_PCD_MatchTableGetKeyStatistics
+
+ @Description This routine may be used to get statistics counters of specific key
+ in a CC Node.
+
+ If 'e_FM_PCD_CC_STATS_MODE_FRAME' and
+ 'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this node,
+ these counters reflect how many frames passed that were matched
+ this key; The total frames count will be returned in the counter
+ of the first range (as only one frame length range was defined).
+ If 'e_FM_PCD_CC_STATS_MODE_RMON' was set for this node, the total
+ frame count will be separated to frame length counters, based on
+ provided frame length ranges.
+
+ @Param[in] h_CcNode A handle to the node
+ @Param[in] keyIndex Key index for adding
+ @Param[out] p_KeyStatistics Key statistics counters
+
+ @Return The specific key statistics.
+
+ @Cautions Allowed only following FM_PCD_MatchTableSet().
+*/
+
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_MATCH_TABLE_GET_KEY_STAT_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(12), ioc_compat_fm_pcd_cc_tbl_get_stats_t)
+#endif
+#define FM_PCD_IOC_MATCH_TABLE_GET_KEY_STAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(12), ioc_fm_pcd_cc_tbl_get_stats_t)
+
+/**
+ @Function FM_PCD_MatchTableGetMissStatistics
+
+ @Description This routine may be used to get statistics counters of miss entry
+ in a CC Node.
+
+ If 'e_FM_PCD_CC_STATS_MODE_FRAME' and
+ 'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this node,
+ these counters reflect how many frames were not matched to any
+ existing key and therefore passed through the miss entry; The
+ total frames count will be returned in the counter of the
+ first range (as only one frame length range was defined).
+
+ @Param[in] h_CcNode A handle to the node
+ @Param[out] p_MissStatistics Statistics counters for 'miss'
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_MatchTableSet().
+*/
+
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_MATCH_TABLE_GET_MISS_STAT_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(13), ioc_compat_fm_pcd_cc_tbl_get_stats_t)
+#endif
+#define FM_PCD_IOC_MATCH_TABLE_GET_MISS_STAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(13), ioc_fm_pcd_cc_tbl_get_stats_t)
+
+/**
+ @Function FM_PCD_HashTableGetMissStatistics
+
+ @Description This routine may be used to get statistics counters of 'miss'
+ entry of the a hash table.
+
+ If 'e_FM_PCD_CC_STATS_MODE_FRAME' and
+ 'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this node,
+ these counters reflect how many frames were not matched to any
+ existing key and therefore passed through the miss entry;
+
+ @Param[in] h_HashTbl A handle to a hash table
+ @Param[out] p_MissStatistics Statistics counters for 'miss'
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_HashTableSet().
+*/
+
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_HASH_TABLE_GET_MISS_STAT_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(14), ioc_compat_fm_pcd_cc_tbl_get_stats_t)
+#endif
+#define FM_PCD_IOC_HASH_TABLE_GET_MISS_STAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(14), ioc_fm_pcd_cc_tbl_get_stats_t)
+
+/**
+ @Function FM_PCD_NetEnvCharacteristicsSet
+
+ @Description Define a set of Network Environment Characteristics.
+
+ When setting an environment it is important to understand its
+ application. It is not meant to describe the flows that will run
+ on the ports using this environment, but what the user means TO DO
+ with the PCD mechanisms in order to parse-classify-distribute those
+ frames.
+ By specifying a distinction unit, the user means it would use that option
+ for distinction between frames at either a KeyGen scheme or a coarse
+ classification action descriptor. Using interchangeable headers to define a
+ unit means that the user is indifferent to which of the interchangeable
+ headers is present in the frame, and wants the distinction to be based
+ on the presence of either one of them.
+
+ Depending on context, there are limitations to the use of environments. A
+ port using the PCD functionality is bound to an environment. Some or even
+ all ports may share an environment but also an environment per port is
+ possible. When initializing a scheme, a classification plan group (see below),
+ or a coarse classification tree, one of the initialized environments must be
+ stated and related to. When a port is bound to a scheme, a classification
+ plan group, or a coarse classification tree, it MUST be bound to the same
+ environment.
+
+ The different PCD modules, may relate (for flows definition) ONLY on
+ distinction units as defined by their environment. When initializing a
+ scheme for example, it may not choose to select IPV4 as a match for
+ recognizing flows unless it was defined in the relating environment. In
+ fact, to guide the user through the configuration of the PCD, each module's
+ characterization in terms of flows is not done using protocol names, but using
+ environment indexes.
+
+ In terms of HW implementation, the list of distinction units sets the LCV vectors
+ and later used for match vector, classification plan vectors and coarse classification
+ indexing.
+
+ @Param[in,out] ioc_fm_pcd_net_env_params_t A structure defining the distinction units for this configuration.
+
+ @Return 0 on success; Error code otherwise.
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_NET_ENV_CHARACTERISTICS_SET_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(20), ioc_compat_fm_pcd_net_env_params_t)
+#endif
+#define FM_PCD_IOC_NET_ENV_CHARACTERISTICS_SET _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(20), ioc_fm_pcd_net_env_params_t)
+
+/**
+ @Function FM_PCD_NetEnvCharacteristicsDelete
+
+ @Description Deletes a set of Network Environment Charecteristics.
+
+ @Param[in] ioc_fm_obj_t - The id of a Network Environment object.
+
+ @Return 0 on success; Error code otherwise.
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_NET_ENV_CHARACTERISTICS_DELETE_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(21), ioc_compat_fm_obj_t)
+#endif
+#define FM_PCD_IOC_NET_ENV_CHARACTERISTICS_DELETE _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(21), ioc_fm_obj_t)
+
+/**
+ @Function FM_PCD_KgSchemeSet
+
+ @Description Initializing or modifying and enabling a scheme for the KeyGen.
+ This routine should be called for adding or modifying a scheme.
+ When a scheme needs modifying, the API requires that it will be
+ rewritten. In such a case 'modify' should be TRUE. If the
+ routine is called for a valid scheme and 'modify' is FALSE,
+ it will return error.
+
+ @Param[in,out] ioc_fm_pcd_kg_scheme_params_t A structure of parameters for defining the scheme
+
+ @Return 0 on success; Error code otherwise.
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_KG_SCHEME_SET_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(24), ioc_compat_fm_pcd_kg_scheme_params_t)
+#endif
+#define FM_PCD_IOC_KG_SCHEME_SET _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(24), ioc_fm_pcd_kg_scheme_params_t)
+
+/**
+ @Function FM_PCD_KgSchemeDelete
+
+ @Description Deleting an initialized scheme.
+
+ @Param[in] ioc_fm_obj_t scheme id as initialized by application at FM_PCD_IOC_KG_SET_SCHEME
+
+ @Return 0 on success; Error code otherwise.
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_KG_SCHEME_DELETE_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(25), ioc_compat_fm_obj_t)
+#endif
+#define FM_PCD_IOC_KG_SCHEME_DELETE _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(25), ioc_fm_obj_t)
+
+/**
+ @Function FM_PCD_CcRootBuild
+
+ @Description This routine must be called to define a complete coarse
+ classification tree. This is the way to define coarse
+ classification to a certain flow - the KeyGen schemes
+ may point only to trees defined in this way.
+
+ @Param[in,out] ioc_fm_pcd_cc_tree_params_t A structure of parameters to define the tree.
+
+ @Return 0 on success; Error code otherwise.
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_CC_ROOT_BUILD_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(26), compat_uptr_t)
+#endif
+#define FM_PCD_IOC_CC_ROOT_BUILD _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(26), void *) /* workaround ...*/
+
+/**
+ @Function FM_PCD_CcRootDelete
+
+ @Description Deleting a built tree.
+
+ @Param[in] ioc_fm_obj_t - The id of a CC tree.
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_CC_ROOT_DELETE_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(27), ioc_compat_fm_obj_t)
+#endif
+#define FM_PCD_IOC_CC_ROOT_DELETE _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(27), ioc_fm_obj_t)
+
+/**
+ @Function FM_PCD_MatchTableSet
+
+ @Description This routine should be called for each CC (coarse classification)
+ node. The whole CC tree should be built bottom up so that each
+ node points to already defined nodes. p_NodeId returns the node
+ Id to be used by other nodes.
+
+ @Param[in,out] ioc_fm_pcd_cc_node_params_t A structure for defining the CC node params
+
+ @Return 0 on success; Error code otherwise.
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_MATCH_TABLE_SET_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(28), compat_uptr_t)
+#endif
+#define FM_PCD_IOC_MATCH_TABLE_SET _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(28), void *) /* workaround ...*/
+
+/**
+ @Function FM_PCD_MatchTableDelete
+
+ @Description Deleting a built node.
+
+ @Param[in] ioc_fm_obj_t - The id of a CC node.
+
+ @Return 0 on success; Error code otherwise.
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_MATCH_TABLE_DELETE_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(29), ioc_compat_fm_obj_t)
+#endif
+#define FM_PCD_IOC_MATCH_TABLE_DELETE _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(29), ioc_fm_obj_t)
+
+/**
+ @Function FM_PCD_CcRootModifyNextEngine
+
+ @Description Modify the Next Engine Parameters in the entry of the tree.
+
+ @Param[in] ioc_fm_pcd_cc_tree_modify_next_engine_params_t - Pointer to a structure with the relevant parameters
+
+ @Return 0 on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_CcRootBuild().
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_CC_ROOT_MODIFY_NEXT_ENGINE_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(30), ioc_compat_fm_pcd_cc_tree_modify_next_engine_params_t)
+#endif
+#define FM_PCD_IOC_CC_ROOT_MODIFY_NEXT_ENGINE _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(30), ioc_fm_pcd_cc_tree_modify_next_engine_params_t)
+
+/**
+ @Function FM_PCD_MatchTableModifyNextEngine
+
+ @Description Modify the Next Engine Parameters in the relevant key entry of the node.
+
+ @Param[in] ioc_fm_pcd_cc_node_modify_next_engine_params_t A pointer to a structure with the relevant parameters
+
+ @Return 0 on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_MatchTableSet().
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_MATCH_TABLE_MODIFY_NEXT_ENGINE_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(31), ioc_compat_fm_pcd_cc_node_modify_next_engine_params_t)
+#endif
+#define FM_PCD_IOC_MATCH_TABLE_MODIFY_NEXT_ENGINE _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(31), ioc_fm_pcd_cc_node_modify_next_engine_params_t)
+
+/**
+ @Function FM_PCD_MatchTableModifyMissNextEngine
+
+ @Description Modify the Next Engine Parameters of the Miss key case of the node.
+
+ @Param[in] ioc_fm_pcd_cc_node_modify_next_engine_params_t - Pointer to a structure with the relevant parameters
+
+ @Return 0 on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_MatchTableSet().
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_MATCH_TABLE_MODIFY_MISS_NEXT_ENGINE_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(32), ioc_compat_fm_pcd_cc_node_modify_next_engine_params_t)
+#endif
+#define FM_PCD_IOC_MATCH_TABLE_MODIFY_MISS_NEXT_ENGINE _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(32), ioc_fm_pcd_cc_node_modify_next_engine_params_t)
+
+/**
+ @Function FM_PCD_MatchTableRemoveKey
+
+ @Description Remove the key (including next engine parameters of this key)
+ defined by the index of the relevant node.
+
+ @Param[in] ioc_fm_pcd_cc_node_remove_key_params_t A pointer to a structure with the relevant parameters
+
+ @Return 0 on success; Error code otherwise.
+
+ @Cautions Allowed only after FM_PCD_MatchTableSet() has been called for this
+ node and for all of the nodes that lead to it.
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_MATCH_TABLE_REMOVE_KEY_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(33), ioc_compat_fm_pcd_cc_node_remove_key_params_t)
+#endif
+#define FM_PCD_IOC_MATCH_TABLE_REMOVE_KEY _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(33), ioc_fm_pcd_cc_node_remove_key_params_t)
+
+/**
+ @Function FM_PCD_MatchTableAddKey
+
+ @Description Add the key (including next engine parameters of this key in the
+ index defined by the keyIndex. Note that 'FM_PCD_LAST_KEY_INDEX'
+ may be used when the user doesn't care about the position of the
+ key in the table - in that case, the key will be automatically
+ added by the driver in the last available entry.
+
+ @Param[in] ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t A pointer to a structure with the relevant parameters
+
+ @Return 0 on success; Error code otherwise.
+
+ @Cautions Allowed only after FM_PCD_MatchTableSet() has been called for this
+ node and for all of the nodes that lead to it.
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_MATCH_TABLE_ADD_KEY_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(34), ioc_compat_fm_pcd_cc_node_modify_key_and_next_engine_params_t)
+#endif
+#define FM_PCD_IOC_MATCH_TABLE_ADD_KEY _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(34), ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t)
+
+/**
+ @Function FM_PCD_MatchTableModifyKeyAndNextEngine
+
+ @Description Modify the key and Next Engine Parameters of this key in the index defined by key_index.
+
+ @Param[in] ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t A pointer to a structure with the relevant parameters
+
+ @Return 0 on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_MatchTableSet() not only of the relevnt node but also
+ the node that points to this node
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_MATCH_TABLE_MODIFY_KEY_AND_NEXT_ENGINE_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(35), ioc_compat_fm_pcd_cc_node_modify_key_and_next_engine_params_t)
+#endif
+#define FM_PCD_IOC_MATCH_TABLE_MODIFY_KEY_AND_NEXT_ENGINE _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(35), ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t)
+
+/**
+ @Function FM_PCD_MatchTableModifyKey
+
+ @Description Modify the key at the index defined by key_index.
+
+ @Param[in] ioc_fm_pcd_cc_node_modify_key_params_t - Pointer to a structure
+ with the relevant parameters
+
+ @Return 0 on success; Error code otherwise.
+
+ @Cautions Allowed only after FM_PCD_MatchTableSet() has been called for this
+ node and for all of the nodes that lead to it.
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_MATCH_TABLE_MODIFY_KEY_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(36), ioc_compat_fm_pcd_cc_node_modify_key_params_t)
+#endif
+#define FM_PCD_IOC_MATCH_TABLE_MODIFY_KEY _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(36), ioc_fm_pcd_cc_node_modify_key_params_t)
+
+/**
+ @Function FM_PCD_HashTableSet
+
+ @Description This routine initializes a hash table structure.
+ KeyGen hash result determines the hash bucket.
+ Next, KeyGen key is compared against all keys of this
+ bucket (exact match).
+ Number of sets (number of buckets) of the hash equals to the
+ number of 1-s in 'hash_res_mask' in the provided parameters.
+ Number of hash table ways is then calculated by dividing
+ 'max_num_of_keys' equally between the hash sets. This is the
+ maximal number of keys that a hash bucket may hold.
+ The hash table is initialized empty and keys may be
+ added to it following the initialization. Keys masks are not
+ supported in current hash table implementation.
+ The initialized hash table can be integrated as a node in a
+ CC tree.
+
+ @Param[in,out] ioc_fm_pcd_hash_table_params_t - Pointer to a structure with the relevant parameters
+
+ @Return 0 on success; Error code otherwise.
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_HASH_TABLE_SET_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(37), ioc_compat_fm_pcd_hash_table_params_t)
+#endif
+#define FM_PCD_IOC_HASH_TABLE_SET _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(37), ioc_fm_pcd_hash_table_params_t)
+
+/**
+ @Function FM_PCD_HashTableDelete
+
+ @Description This routine deletes the provided hash table and released all
+ its allocated resources.
+
+ @Param[in] ioc_fm_obj_t - The ID of a hash table.
+
+ @Return 0 on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_HashTableSet().
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_HASH_TABLE_DELETE_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(37), ioc_compat_fm_obj_t)
+#endif
+#define FM_PCD_IOC_HASH_TABLE_DELETE _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(37), ioc_fm_obj_t)
+
+/**
+ @Function FM_PCD_HashTableAddKey
+
+ @Description This routine adds the provided key (including next engine
+ parameters of this key) to the hash table.
+ The key is added as the last key of the bucket that it is
+ mapped to.
+
+ @Param[in] ioc_fm_pcd_hash_table_add_key_params_t - Pointer to a structure
+ with the relevant parameters
+
+ @Return 0 on success; error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_HashTableSet().
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_HASH_TABLE_ADD_KEY_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(39), ioc_compat_fm_pcd_hash_table_add_key_params_t)
+#endif
+#define FM_PCD_IOC_HASH_TABLE_ADD_KEY _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(39), ioc_fm_pcd_hash_table_add_key_params_t)
+
+/**
+ @Function FM_PCD_HashTableRemoveKey
+
+ @Description This routine removes the requested key (including next engine
+ parameters of this key) from the hash table.
+
+ @Param[in] ioc_fm_pcd_hash_table_remove_key_params_t - Pointer to a structure
+ with the relevant parameters
+
+ @Return 0 on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_HashTableSet().
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_HASH_TABLE_REMOVE_KEY_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(40), ioc_compat_fm_pcd_hash_table_remove_key_params_t)
+#endif
+#define FM_PCD_IOC_HASH_TABLE_REMOVE_KEY _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(40), ioc_fm_pcd_hash_table_remove_key_params_t)
+
+/**
+ @Function FM_PCD_PlcrProfileSet
+
+ @Description Sets a profile entry in the policer profile table.
+ The routine overrides any existing value.
+
+ @Param[in,out] ioc_fm_pcd_plcr_profile_params_t A structure of parameters for defining a
+ policer profile entry.
+
+ @Return 0 on success; Error code otherwise.
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_PLCR_PROFILE_SET_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(41), ioc_compat_fm_pcd_plcr_profile_params_t)
+#endif
+#define FM_PCD_IOC_PLCR_PROFILE_SET _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(41), ioc_fm_pcd_plcr_profile_params_t)
+
+/**
+ @Function FM_PCD_PlcrProfileDelete
+
+ @Description Delete a profile entry in the policer profile table.
+ The routine set entry to invalid.
+
+ @Param[in] ioc_fm_obj_t The id of a policer profile.
+
+ @Return 0 on success; Error code otherwise.
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_PLCR_PROFILE_DELETE_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(41), ioc_compat_fm_obj_t)
+#endif
+#define FM_PCD_IOC_PLCR_PROFILE_DELETE _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(41), ioc_fm_obj_t)
+
+/**
+ @Function FM_PCD_ManipNodeSet
+
+ @Description This routine should be called for defining a manipulation
+ node. A manipulation node must be defined before the CC node
+ that precedes it.
+
+ @Param[in] ioc_fm_pcd_manip_params_t - A structure of parameters defining the manipulation
+
+ @Return A handle to the initialized object on success; NULL code otherwise.
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_MANIP_NODE_SET_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(43), ioc_compat_fm_pcd_manip_params_t)
+#endif
+#define FM_PCD_IOC_MANIP_NODE_SET _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(43), ioc_fm_pcd_manip_params_t)
+
+/**
+ @Function FM_PCD_ManipNodeReplace
+
+ @Description Change existing manipulation node to be according to new requirement.
+ (Here, it's implemented as a variant of the same IOCTL as for
+ FM_PCD_ManipNodeSet(), and one that when called, the 'id' member
+ in its 'ioc_fm_pcd_manip_params_t' argument is set to contain
+ the manip node's handle)
+
+ @Param[in] ioc_fm_pcd_manip_params_t - A structure of parameters defining the manipulation
+
+ @Return 0 on success; error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_ManipNodeSet().
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_MANIP_NODE_REPLACE_COMPAT FM_PCD_IOC_MANIP_NODE_SET_COMPAT
+#endif
+#define FM_PCD_IOC_MANIP_NODE_REPLACE FM_PCD_IOC_MANIP_NODE_SET
+
+/**
+ @Function FM_PCD_ManipNodeDelete
+
+ @Description Delete an existing manipulation node.
+
+ @Param[in] ioc_fm_obj_t The id of the manipulation node to delete.
+
+ @Return 0 on success; error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_ManipNodeSet().
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_MANIP_NODE_DELETE_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(44), ioc_compat_fm_obj_t)
+#endif
+#define FM_PCD_IOC_MANIP_NODE_DELETE _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(44), ioc_fm_obj_t)
+
+/**
+ @Function FM_PCD_ManipGetStatistics
+
+ @Description Retrieve the manipulation statistics.
+
+ @Param[in] h_ManipNode A handle to a manipulation node.
+ @Param[out] p_FmPcdManipStats A structure for retrieving the manipulation statistics
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_ManipNodeSet().
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_MANIP_GET_STATS_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(50), ioc_compat_fm_pcd_manip_get_stats_t)
+#endif
+#define FM_PCD_IOC_MANIP_GET_STATS _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(50), ioc_fm_pcd_manip_get_stats_t)
+
+/**
+@Function FM_PCD_SetAdvancedOffloadSupport
+
+@Description This routine must be called in order to support the following features:
+ IP-fragmentation, IP-reassembly, IPsec,
+ Header-manipulation, frame-replicator.
+
+@Param[in] h_FmPcd FM PCD module descriptor.
+
+@Return 0 on success; error code otherwise.
+
+@Cautions Allowed only when PCD is disabled.
+*/
+#define FM_PCD_IOC_SET_ADVANCED_OFFLOAD_SUPPORT _IO(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(45))
+
+#if (DPAA_VERSION >= 11)
+/**
+ @Function FM_PCD_FrmReplicSetGroup
+
+ @Description Initialize a Frame Replicator group.
+
+ @Param[in] h_FmPcd FM PCD module descriptor.
+ @Param[in] p_FrmReplicGroupParam A structure of parameters for the
+ initialization of the frame replicator group.
+
+ @Return A handle to the initialized object on success; NULL code otherwise.
+
+ @Cautions Allowed only following FM_PCD_Init().
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_FRM_REPLIC_GROUP_SET_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(46), ioc_compat_fm_pcd_frm_replic_group_params_t)
+#endif
+#define FM_PCD_IOC_FRM_REPLIC_GROUP_SET _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(46), ioc_fm_pcd_frm_replic_group_params_t)
+
+/**
+ @Function FM_PCD_FrmReplicDeleteGroup
+
+ @Description Delete a Frame Replicator group.
+
+ @Param[in] h_FrmReplicGroup A handle to the frame replicator group.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_FrmReplicSetGroup().
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_FRM_REPLIC_GROUP_DELETE_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(47), ioc_compat_fm_obj_t)
+#endif
+#define FM_PCD_IOC_FRM_REPLIC_GROUP_DELETE _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(47), ioc_fm_obj_t)
+
+/**
+ @Function FM_PCD_FrmReplicAddMember
+
+ @Description Add the member in the index defined by the memberIndex.
+
+ @Param[in] h_FrmReplicGroup A handle to the frame replicator group.
+ @Param[in] memberIndex member index for adding.
+ @Param[in] p_MemberParams A pointer to the new member parameters.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_FrmReplicSetGroup() of this group.
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_FRM_REPLIC_MEMBER_ADD_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(48), ioc_compat_fm_pcd_frm_replic_member_params_t)
+#endif
+#define FM_PCD_IOC_FRM_REPLIC_MEMBER_ADD _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(48), ioc_fm_pcd_frm_replic_member_params_t)
+
+/**
+ @Function FM_PCD_FrmReplicRemoveMember
+
+ @Description Remove the member defined by the index from the relevant group.
+
+ @Param[in] h_FrmReplicGroup A handle to the frame replicator group.
+ @Param[in] memberIndex member index for removing.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_FrmReplicSetGroup() of this group.
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_FRM_REPLIC_MEMBER_REMOVE_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(49), ioc_compat_fm_pcd_frm_replic_member_t)
+#endif
+#define FM_PCD_IOC_FRM_REPLIC_MEMBER_REMOVE _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(49), ioc_fm_pcd_frm_replic_member_t)
+
+#endif
+
+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
+/**
+ @Function FM_PCD_StatisticsSetNode
+
+ @Description This routine should be called for defining a statistics node.
+
+ @Param[in,out] ioc_fm_pcd_stats_params_t A structure of parameters defining the statistics
+
+ @Return 0 on success; Error code otherwise.
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_STATISTICS_SET_NODE_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(45), void *)
+#endif
+#define FM_PCD_IOC_STATISTICS_SET_NODE _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(45), void *)
+
+#endif /* FM_CAPWAP_SUPPORT */
+
+/**
+ @Group FM_grp Frame Manager API
+
+ @Description Frame Manager Application Programming Interface
+
+ @{
+*/
+
+/**
+ @Group FM_PCD_grp FM PCD
+
+ @Description Frame Manager PCD (Parse-Classify-Distribute) API.
+
+ The FM PCD module is responsible for the initialization of all
+ global classifying FM modules. This includes the parser general and
+ common registers, the key generator global and common registers,
+ and the policer global and common registers.
+ In addition, the FM PCD SW module will initialize all required
+ key generator schemes, coarse classification flows, and policer
+ profiles. When FM module is configured to work with one of these
+ entities, it will register to it using the FM PORT API. The PCD
+ module will manage the PCD resources - i.e. resource management of
+ KeyGen schemes, etc.
+
+ @{
+*/
+
+/**
+ @Collection General PCD defines
+*/
+#define FM_PCD_MAX_NUM_OF_PRIVATE_HDRS 2
+/**< Number of units/headers saved for user */
+
+#define FM_PCD_PRS_NUM_OF_HDRS 16
+/**< Number of headers supported by HW parser */
+#define FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS (32 - FM_PCD_MAX_NUM_OF_PRIVATE_HDRS)
+/**< Number of distinction units is limited by
+ register size (32 bits) minus reserved bits
+ for private headers. */
+#define FM_PCD_MAX_NUM_OF_INTERCHANGEABLE_HDRS 4
+/**< Maximum number of interchangeable headers in a distinction unit */
+#define FM_PCD_KG_NUM_OF_GENERIC_REGS FM_KG_NUM_OF_GENERIC_REGS
+/**< Total number of generic KeyGen registers */
+#define FM_PCD_KG_MAX_NUM_OF_EXTRACTS_PER_KEY 35
+/**< Max number allowed on any configuration;
+ For HW implementation reasons, in most
+ cases less than this will be allowed; The
+ driver will return an initialization error
+ if resource is unavailable. */
+#define FM_PCD_KG_NUM_OF_EXTRACT_MASKS 4
+/**< Total number of masks allowed on KeyGen extractions. */
+#define FM_PCD_KG_NUM_OF_DEFAULT_GROUPS 16
+/**< Number of default value logical groups */
+
+#define FM_PCD_PRS_NUM_OF_LABELS 32
+/**< Maximum number of SW parser labels */
+#define FM_SW_PRS_MAX_IMAGE_SIZE (FM_PCD_SW_PRS_SIZE /*- FM_PCD_PRS_SW_OFFSET -FM_PCD_PRS_SW_TAIL_SIZE*/ - FM_PCD_PRS_SW_PATCHES_SIZE)
+/**< Maximum size of SW parser code */
+
+#define FM_PCD_MAX_MANIP_INSRT_TEMPLATE_SIZE 128
+/**< Maximum size of insertion template for insert manipulation */
+
+#if (DPAA_VERSION >= 11)
+#define FM_PCD_FRM_REPLIC_MAX_NUM_OF_ENTRIES 64
+/**< Maximum possible entries for frame replicator group */
+#endif /* (DPAA_VERSION >= 11) */
+/* @} */
+
+/**
+ @Group FM_PCD_init_grp FM PCD Initialization Unit
+
+ @Description Frame Manager PCD Initialization Unit API
+
+ @{
+*/
+
+/**
+ @Description Exceptions user callback routine, will be called upon an
+ exception passing the exception identification.
+
+ @Param[in] h_App - User's application descriptor.
+ @Param[in] exception - The exception.
+ */
+typedef void (t_FmPcdExceptionCallback) (t_Handle h_App,
+ ioc_fm_pcd_exceptions exception);
+
+/**
+ @Description Exceptions user callback routine, will be called upon an
+ exception passing the exception identification.
+
+ @Param[in] h_App - User's application descriptor.
+ @Param[in] exception - The exception.
+ @Param[in] index - id of the relevant source (may be scheme or profile id).
+ */
+typedef void (t_FmPcdIdExceptionCallback) (t_Handle h_App,
+ ioc_fm_pcd_exceptions exception,
+ uint16_t index);
+
+/**
+ @Description A callback for enqueuing frame onto a QM queue.
+
+ @Param[in] h_QmArg - Application's handle passed to QM module on enqueue.
+ @Param[in] p_Fd - Frame descriptor for the frame.
+
+ @Return E_OK on success; Error code otherwise.
+ */
+typedef uint32_t (t_FmPcdQmEnqueueCallback) (t_Handle h_QmArg, void *p_Fd);
+
+/**
+ @Description Host-Command parameters structure.
+
+ When using Host command for PCD functionalities, a dedicated port
+ must be used. If this routine is called for a PCD in a single partition
+ environment, or it is the Master partition in a Multi-partition
+ environment, The port will be initialized by the PCD driver
+ initialization routine.
+ */
+typedef struct t_FmPcdHcParams {
+ uintptr_t portBaseAddr;
+ /**< Virtual Address of Host-Command Port memory mapped registers.*/
+ uint8_t portId;
+ /**< Port Id (0-6 relative to Host-Command/Offline-Parsing ports);
+ NOTE: When configuring Host Command port for
+ FMANv3 devices (DPAA_VERSION 11 and higher),
+ portId=0 MUST be used. */
+ uint16_t liodnBase;
+ /**< LIODN base for this port, to be used together with LIODN offset
+ (irrelevant for P4080 revision 1.0) */
+ uint32_t errFqid;
+ /**< Host-Command Port error queue Id. */
+ uint32_t confFqid;
+ /**< Host-Command Port confirmation queue Id. */
+ uint32_t qmChannel;
+ /**< QM channel dedicated to this Host-Command port;
+ will be used by the FM for dequeue. */
+ t_FmPcdQmEnqueueCallback *f_QmEnqueue;
+ /**< Callback routine for enqueuing a frame to the QM */
+ t_Handle h_QmArg;
+ /**< Application's handle passed to QM module on enqueue */
+} t_FmPcdHcParams;
+
+/**
+ @Description The main structure for PCD initialization
+ */
+typedef struct t_FmPcdParams {
+ bool prsSupport;
+ /**< TRUE if Parser will be used for any of the FM ports. */
+ bool ccSupport;
+ /**< TRUE if Coarse Classification will be used for any of the FM ports. */
+ bool kgSupport;
+ /**< TRUE if KeyGen will be used for any of the FM ports. */
+ bool plcrSupport;
+ /**< TRUE if Policer will be used for any of the FM ports. */
+ t_Handle h_Fm;
+ /**< A handle to the FM module. */
+ uint8_t numOfSchemes;
+ /**< Number of schemes dedicated to this partition.
+ this parameter is relevant if 'kgSupport'=TRUE. */
+ bool useHostCommand;
+ /**< Optional for single partition, Mandatory for Multi partition */
+ t_FmPcdHcParams hc;
+ /**< Host Command parameters, relevant only if 'useHostCommand'=TRUE;
+ Relevant when FM not runs in "guest-mode". */
+
+ t_FmPcdExceptionCallback *f_Exception;
+ /**< Callback routine for general PCD exceptions;
+ Relevant when FM not runs in "guest-mode". */
+ t_FmPcdIdExceptionCallback *f_ExceptionId;
+ /**< Callback routine for specific KeyGen scheme or
+ Policer profile exceptions;
+ Relevant when FM not runs in "guest-mode". */
+ t_Handle h_App;
+ /**< A handle to an application layer object; This handle will
+ be passed by the driver upon calling the above callbacks;
+ Relevant when FM not runs in "guest-mode". */
+ uint8_t partPlcrProfilesBase;
+ /**< The first policer-profile-id dedicated to this partition.
+ this parameter is relevant if 'plcrSupport'=TRUE.
+ NOTE: this parameter relevant only when working with multiple partitions. */
+ uint16_t partNumOfPlcrProfiles;
+ /**< Number of policer-profiles dedicated to this partition.
+ this parameter is relevant if 'plcrSupport'=TRUE.
+ NOTE: this parameter relevant only when working with multiple partitions. */
+} t_FmPcdParams;
+
+typedef struct t_FmPcdPrsLabelParams {
+ uint32_t instructionOffset;
+ ioc_net_header_type hdr;
+ uint8_t indexPerHdr;
+} t_FmPcdPrsLabelParams;
+
+typedef struct t_FmPcdPrsSwParams {
+ bool override;
+ uint32_t size;
+ uint16_t base;
+ uint8_t *p_Code;
+ uint32_t swPrsDataParams[FM_PCD_PRS_NUM_OF_HDRS];
+ uint8_t numOfLabels;
+ t_FmPcdPrsLabelParams labelsTable[FM_PCD_PRS_NUM_OF_LABELS];
+} t_FmPcdPrsSwParams;
+
+/**
+ @Function FM_PCD_Config
+
+ @Description Basic configuration of the PCD module.
+ Creates descriptor for the FM PCD module.
+
+ @Param[in] p_FmPcdParams A structure of parameters for the initialization of PCD.
+
+ @Return A handle to the initialized module.
+*/
+t_Handle FM_PCD_Config(t_FmPcdParams *p_FmPcdParams);
+
+/**
+ @Function FM_PCD_Init
+
+ @Description Initialization of the PCD module.
+
+ @Param[in] h_FmPcd - FM PCD module descriptor.
+
+ @Return E_OK on success; Error code otherwise.
+*/
+uint32_t FM_PCD_Init(t_Handle h_FmPcd);
+
+/**
+ @Function FM_PCD_Free
+
+ @Description Frees all resources that were assigned to FM module.
+
+ Calling this routine invalidates the descriptor.
+
+ @Param[in] h_FmPcd - FM PCD module descriptor.
+
+ @Return E_OK on success; Error code otherwise.
+*/
+uint32_t FM_PCD_Free(t_Handle h_FmPcd);
+
+/**
+ @Group FM_PCD_advanced_cfg_grp FM PCD Advanced Configuration Unit
+
+ @Description Frame Manager PCD Advanced Configuration API.
+
+ @{
+*/
+
+/**
+ @Function FM_PCD_ConfigException
+
+ @Description Calling this routine changes the internal driver data base
+ from its default selection of exceptions enabling.
+ [DEFAULT_numOfSharedPlcrProfiles].
+
+ @Param[in] h_FmPcd FM PCD module descriptor.
+ @Param[in] exception The exception to be selected.
+ @Param[in] enable TRUE to enable interrupt, FALSE to mask it.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions This routine should NOT be called from guest-partition
+ (i.e. guestId != NCSW_MASTER_ID)
+*/
+uint32_t FM_PCD_ConfigException(t_Handle h_FmPcd,
+ ioc_fm_pcd_exceptions exception, bool enable);
+
+/**
+ @Function FM_PCD_ConfigHcFramesDataMemory
+
+ @Description Configures memory-partition-id for FMan-Controller Host-Command
+ frames. Calling this routine changes the internal driver data
+ base from its default configuration [0].
+
+ @Param[in] h_FmPcd FM PCD module descriptor.
+ @Param[in] memId Memory partition ID.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions This routine may be called only if 'useHostCommand' was TRUE
+ when FM_PCD_Config() routine was called.
+*/
+uint32_t FM_PCD_ConfigHcFramesDataMemory(t_Handle h_FmPcd, uint8_t memId);
+
+/**
+ @Function FM_PCD_ConfigPlcrNumOfSharedProfiles
+
+ @Description Calling this routine changes the internal driver data base
+ from its default selection of exceptions enablement.
+ [DEFAULT_numOfSharedPlcrProfiles].
+
+ @Param[in] h_FmPcd FM PCD module descriptor.
+ @Param[in] numOfSharedPlcrProfiles Number of profiles to
+ be shared between ports on this partition
+
+ @Return E_OK on success; Error code otherwise.
+*/
+uint32_t FM_PCD_ConfigPlcrNumOfSharedProfiles(t_Handle h_FmPcd,
+ uint16_t numOfSharedPlcrProfiles);
+
+/**
+ @Function FM_PCD_ConfigPlcrAutoRefreshMode
+
+ @Description Calling this routine changes the internal driver data base
+ from its default selection of exceptions enablement.
+ By default auto-refresh is [DEFAULT_plcrAutoRefresh].
+
+ @Param[in] h_FmPcd FM PCD module descriptor.
+ @Param[in] enable TRUE to enable, FALSE to disable
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions This routine should NOT be called from guest-partition
+ (i.e. guestId != NCSW_MASTER_ID)
+*/
+uint32_t FM_PCD_ConfigPlcrAutoRefreshMode(t_Handle h_FmPcd, bool enable);
+
+/**
+ @Function FM_PCD_ConfigPrsMaxCycleLimit
+
+ @Description Calling this routine changes the internal data structure for
+ the maximum parsing time from its default value
+ [DEFAULT_MAX_PRS_CYC_LIM].
+
+ @Param[in] h_FmPcd FM PCD module descriptor.
+ @Param[in] value 0 to disable the mechanism, or new
+ maximum parsing time.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions This routine should NOT be called from guest-partition
+ (i.e. guestId != NCSW_MASTER_ID)
+*/
+uint32_t FM_PCD_ConfigPrsMaxCycleLimit(t_Handle h_FmPcd, uint16_t value);
+
+/** @} */ /* end of FM_PCD_advanced_cfg_grp group */
+/** @} */ /* end of FM_PCD_init_grp group */
+
+/**
+ @Group FM_PCD_Runtime_grp FM PCD Runtime Unit
+
+ @Description Frame Manager PCD Runtime Unit API
+
+ The runtime control allows creation of PCD infrastructure modules
+ such as Network Environment Characteristics, Classification Plan
+ Groups and Coarse Classification Trees.
+ It also allows on-the-fly initialization, modification and removal
+ of PCD modules such as KeyGen schemes, coarse classification nodes
+ and Policer profiles.
+
+ In order to explain the programming model of the PCD driver interface
+ a few terms should be explained, and will be used below.
+ - Distinction Header - One of the 16 protocols supported by the FM parser,
+ or one of the SHIM headers (1 or 2). May be a header with a special
+ option (see below).
+ - Interchangeable Headers Group - This is a group of Headers recognized
+ by either one of them. For example, if in a specific context the user
+ chooses to treat IPv4 and IPV6 in the same way, they may create an
+ interchangeable Headers Unit consisting of these 2 headers.
+ - A Distinction Unit - a Distinction Header or an Interchangeable Headers
+ Group.
+ - Header with special option - applies to Ethernet, MPLS, VLAN, IPv4 and
+ IPv6, includes multicast, broadcast and other protocol specific options.
+ In terms of hardware it relates to the options available in the classification
+ plan.
+ - Network Environment Characteristics - a set of Distinction Units that define
+ the total recognizable header selection for a certain environment. This is
+ NOT the list of all headers that will ever appear in a flow, but rather
+ everything that needs distinction in a flow, where distinction is made by KeyGen
+ schemes and coarse classification action descriptors.
+
+ The PCD runtime modules initialization is done in stages. The first stage after
+ initializing the PCD module itself is to establish a Network Flows Environment
+ Definition. The application may choose to establish one or more such environments.
+ Later, when needed, the application will have to state, for some of its modules,
+ to which single environment it belongs.
+
+ @{
+*/
+
+t_Handle FM_PCD_Open(t_FmPcdParams *p_FmPcdParams);
+void FM_PCD_Close(t_Handle h_FmPcd);
+
+/**
+ @Function FM_PCD_Enable
+
+ @Description This routine should be called after PCD is initialized for enabling all
+ PCD engines according to their existing configuration.
+
+ @Param[in] h_FmPcd FM PCD module descriptor.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_Init() and when PCD is disabled.
+*/
+uint32_t FM_PCD_Enable(t_Handle h_FmPcd);
+
+/**
+ @Function FM_PCD_Disable
+
+ @Description This routine may be called when PCD is enabled in order to
+ disable all PCD engines. It may be called
+ only when none of the ports in the system are using the PCD.
+
+ @Param[in] h_FmPcd FM PCD module descriptor.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_Init() and when PCD is enabled.
+*/
+uint32_t FM_PCD_Disable(t_Handle h_FmPcd);
+
+/**
+ @Function FM_PCD_GetCounter
+
+ @Description Reads one of the FM PCD counters.
+
+ @Param[in] h_FmPcd FM PCD module descriptor.
+ @Param[in] counter The requested counter.
+
+ @Return Counter's current value.
+
+ @Cautions Allowed only following FM_PCD_Init().
+ Note that it is user's responsibility to call this routine only
+ for enabled counters, and there will be no indication if a
+ disabled counter is accessed.
+*/
+uint32_t FM_PCD_GetCounter(t_Handle h_FmPcd, ioc_fm_pcd_counters counter);
+
+/**
+@Function FM_PCD_PrsLoadSw
+
+@Description This routine may be called in order to load software parsing code.
+
+@Param[in] h_FmPcd FM PCD module descriptor.
+@Param[in] p_SwPrs A pointer to a structure of software
+ parser parameters, including the software
+ parser image.
+
+@Return E_OK on success; Error code otherwise.
+
+@Cautions Allowed only following FM_PCD_Init() and when PCD is disabled.
+ This routine should NOT be called from guest-partition
+ (i.e. guestId != NCSW_MASTER_ID)
+*/
+uint32_t FM_PCD_PrsLoadSw(t_Handle h_FmPcd,
+ ioc_fm_pcd_prs_sw_params_t *p_SwPrs);
+
+/**
+@Function FM_PCD_SetAdvancedOffloadSupport
+
+@Description This routine must be called in order to support the following features:
+ IP-fragmentation, IP-reassembly, IPsec, Header-manipulation, frame-replicator.
+
+@Param[in] h_FmPcd FM PCD module descriptor.
+
+@Return E_OK on success; Error code otherwise.
+
+@Cautions Allowed only following FM_PCD_Init() and when PCD is disabled.
+ This routine should NOT be called from guest-partition
+ (i.e. guestId != NCSW_MASTER_ID)
+*/
+uint32_t FM_PCD_SetAdvancedOffloadSupport(t_Handle h_FmPcd);
+
+/**
+ @Function FM_PCD_KgSetDfltValue
+
+ @Description Calling this routine sets a global default value to be used
+ by the KeyGen when parser does not recognize a required
+ field/header.
+ By default default values are 0.
+
+ @Param[in] h_FmPcd FM PCD module descriptor.
+ @Param[in] valueId 0,1 - one of 2 global default values.
+ @Param[in] value The requested default value.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_Init() and when PCD is disabled.
+ This routine should NOT be called from guest-partition
+ (i.e. guestId != NCSW_MASTER_ID)
+*/
+uint32_t FM_PCD_KgSetDfltValue(t_Handle h_FmPcd,
+ uint8_t valueId, uint32_t value);
+
+/**
+ @Function FM_PCD_KgSetAdditionalDataAfterParsing
+
+ @Description Calling this routine allows the KeyGen to access data past
+ the parser finishing point.
+
+ @Param[in] h_FmPcd FM PCD module descriptor.
+ @Param[in] payloadOffset the number of bytes beyond the parser location.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_Init() and when PCD is disabled.
+ This routine should NOT be called from guest-partition
+ (i.e. guestId != NCSW_MASTER_ID)
+*/
+uint32_t FM_PCD_KgSetAdditionalDataAfterParsing(t_Handle h_FmPcd,
+ uint8_t payloadOffset);
+
+/**
+ @Function FM_PCD_SetException
+
+ @Description Calling this routine enables/disables PCD interrupts.
+
+ @Param[in] h_FmPcd FM PCD module descriptor.
+ @Param[in] exception The exception to be selected.
+ @Param[in] enable TRUE to enable interrupt, FALSE to mask it.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_Init().
+ This routine should NOT be called from guest-partition
+ (i.e. guestId != NCSW_MASTER_ID)
+*/
+uint32_t FM_PCD_SetException(t_Handle h_FmPcd,
+ ioc_fm_pcd_exceptions exception, bool enable);
+
+/**
+ @Function FM_PCD_ModifyCounter
+
+ @Description Sets a value to an enabled counter. Use "0" to reset the counter.
+
+ @Param[in] h_FmPcd FM PCD module descriptor.
+ @Param[in] counter The requested counter.
+ @Param[in] value The requested value to be written into the counter.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_Init().
+ This routine should NOT be called from guest-partition
+ (i.e. guestId != NCSW_MASTER_ID)
+*/
+uint32_t FM_PCD_ModifyCounter(t_Handle h_FmPcd,
+ ioc_fm_pcd_counters counter, uint32_t value);
+
+/**
+ @Function FM_PCD_SetPlcrStatistics
+
+ @Description This routine may be used to enable/disable policer statistics
+ counter. By default the statistics is enabled.
+
+ @Param[in] h_FmPcd FM PCD module descriptor
+ @Param[in] enable TRUE to enable, FALSE to disable.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_Init().
+ This routine should NOT be called from guest-partition
+ (i.e. guestId != NCSW_MASTER_ID)
+*/
+uint32_t FM_PCD_SetPlcrStatistics(t_Handle h_FmPcd, bool enable);
+
+/**
+ @Function FM_PCD_SetPrsStatistics
+
+ @Description Defines whether to gather parser statistics including all ports.
+
+ @Param[in] h_FmPcd FM PCD module descriptor.
+ @Param[in] enable TRUE to enable, FALSE to disable.
+
+ @Return None
+
+ @Cautions Allowed only following FM_PCD_Init().
+ This routine should NOT be called from guest-partition
+ (i.e. guestId != NCSW_MASTER_ID)
+*/
+void FM_PCD_SetPrsStatistics(t_Handle h_FmPcd, bool enable);
+
+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
+/**
+ @Function FM_PCD_DumpRegs
+
+ @Description Dumps all PCD registers
+
+ @Param[in] h_FmPcd A handle to an FM PCD Module.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_Init().
+ NOTE: this routine may be called only for FM in master mode
+ (i.e. 'guestId'=NCSW_MASTER_ID) or in a case that the registers
+ are mapped.
+*/
+uint32_t FM_PCD_DumpRegs(t_Handle h_FmPcd);
+
+/**
+ @Function FM_PCD_KgDumpRegs
+
+ @Description Dumps all PCD KG registers
+
+ @Param[in] h_FmPcd A handle to an FM PCD Module.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_Init().
+ NOTE: this routine may be called only for FM in master mode
+ (i.e. 'guestId'=NCSW_MASTER_ID) or in a case that the registers
+ are mapped.
+*/
+uint32_t FM_PCD_KgDumpRegs(t_Handle h_FmPcd);
+
+/**
+ @Function FM_PCD_PlcrDumpRegs
+
+ @Description Dumps all PCD Policer registers
+
+ @Param[in] h_FmPcd A handle to an FM PCD Module.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_Init().
+ NOTE: this routine may be called only for FM in master mode
+ (i.e. 'guestId'=NCSW_MASTER_ID) or in a case that the registers
+ are mapped.
+*/
+uint32_t FM_PCD_PlcrDumpRegs(t_Handle h_FmPcd);
+
+/**
+ @Function FM_PCD_PlcrProfileDumpRegs
+
+ @Description Dumps all PCD Policer profile registers
+
+ @Param[in] h_Profile A handle to a Policer profile.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_Init().
+ NOTE: this routine may be called only for FM in master mode
+ (i.e. 'guestId'=NCSW_MASTER_ID) or in a case that the registers
+ are mapped.
+*/
+uint32_t FM_PCD_PlcrProfileDumpRegs(t_Handle h_Profile);
+
+/**
+ @Function FM_PCD_PrsDumpRegs
+
+ @Description Dumps all PCD Parser registers
+
+ @Param[in] h_FmPcd A handle to an FM PCD Module.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_Init().
+ NOTE: this routine may be called only for FM in master mode
+ (i.e. 'guestId'=NCSW_MASTER_ID) or in a case that the registers
+ are mapped.
+*/
+uint32_t FM_PCD_PrsDumpRegs(t_Handle h_FmPcd);
+
+/**
+ @Function FM_PCD_HcDumpRegs
+
+ @Description Dumps HC Port registers
+
+ @Param[in] h_FmPcd A handle to an FM PCD Module.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_Init().
+ NOTE: this routine may be called only for FM in master mode
+ (i.e. 'guestId'=NCSW_MASTER_ID).
+*/
+uint32_t FM_PCD_HcDumpRegs(t_Handle h_FmPcd);
+#endif /* (defined(DEBUG_ERRORS) && ... */
+
+
+/**
+ KeyGen FM_PCD_Runtime_build_grp FM PCD Runtime Building Unit
+
+ @Description Frame Manager PCD Runtime Building API
+
+ This group contains routines for setting, deleting and modifying
+ PCD resources, for defining the total PCD tree.
+ @{
+*/
+
+/**
+ @Collection Definitions of coarse classification
+ parameters as required by KeyGen (when coarse classification
+ is the next engine after this scheme).
+*/
+#define FM_PCD_MAX_NUM_OF_CC_TREES 8
+#define FM_PCD_MAX_NUM_OF_CC_GROUPS 16
+#define FM_PCD_MAX_NUM_OF_CC_UNITS 4
+#define FM_PCD_MAX_NUM_OF_KEYS 256
+#define FM_PCD_MAX_NUM_OF_FLOWS (4 * KILOBYTE)
+#define FM_PCD_MAX_SIZE_OF_KEY 56
+#define FM_PCD_MAX_NUM_OF_CC_ENTRIES_IN_GRP 16
+#define FM_PCD_LAST_KEY_INDEX 0xffff
+
+#define FM_PCD_MAX_NUM_OF_CC_NODES 255 /* Obsolete, not used - will be removed in the future */
+/* @} */
+
+/**
+ @Collection A set of definitions to allow protocol
+ special option description.
+*/
+typedef uint32_t protocolOpt_t; /**< A general type to define a protocol option. */
+
+typedef protocolOpt_t ethProtocolOpt_t; /**< Ethernet protocol options. */
+#define ETH_BROADCAST 0x80000000 /**< Ethernet Broadcast. */
+#define ETH_MULTICAST 0x40000000 /**< Ethernet Multicast. */
+
+typedef protocolOpt_t vlanProtocolOpt_t; /**< VLAN protocol options. */
+#define VLAN_STACKED 0x20000000 /**< Stacked VLAN. */
+
+typedef protocolOpt_t mplsProtocolOpt_t; /**< MPLS protocol options. */
+#define MPLS_STACKED 0x10000000 /**< Stacked MPLS. */
+
+typedef protocolOpt_t ipv4ProtocolOpt_t; /**< IPv4 protocol options. */
+#define IPV4_BROADCAST_1 0x08000000 /**< IPv4 Broadcast. */
+#define IPV4_MULTICAST_1 0x04000000 /**< IPv4 Multicast. */
+#define IPV4_UNICAST_2 0x02000000 /**< Tunneled IPv4 - Unicast. */
+#define IPV4_MULTICAST_BROADCAST_2 0x01000000 /**< Tunneled IPv4 - Broadcast/Multicast. */
+
+#define IPV4_FRAG_1 0x00000008 /**< IPV4 reassembly option.
+ IPV4 Reassembly manipulation requires network
+ environment with IPV4 header and IPV4_FRAG_1 option */
+
+typedef protocolOpt_t ipv6ProtocolOpt_t; /**< IPv6 protocol options. */
+#define IPV6_MULTICAST_1 0x00800000 /**< IPv6 Multicast. */
+#define IPV6_UNICAST_2 0x00400000 /**< Tunneled IPv6 - Unicast. */
+#define IPV6_MULTICAST_2 0x00200000 /**< Tunneled IPv6 - Multicast. */
+
+#define IPV6_FRAG_1 0x00000004 /**< IPV6 reassembly option.
+ IPV6 Reassembly manipulation requires network
+ environment with IPV6 header and IPV6_FRAG_1 option;
+ in case where fragment found, the fragment-extension offset
+ may be found at 'shim2' (in parser-result). */
+#if (DPAA_VERSION >= 11)
+typedef protocolOpt_t capwapProtocolOpt_t; /**< CAPWAP protocol options. */
+#define CAPWAP_FRAG_1 0x00000008 /**< CAPWAP reassembly option.
+ CAPWAP Reassembly manipulation requires network
+ environment with CAPWAP header and CAPWAP_FRAG_1 option;
+ in case where fragment found, the fragment-extension offset
+ may be found at 'shim2' (in parser-result). */
+#endif /* (DPAA_VERSION >= 11) */
+
+/* @} */
+
+#define FM_PCD_MANIP_MAX_HDR_SIZE 256
+#define FM_PCD_MANIP_DSCP_TO_VLAN_TRANS 64
+
+/**
+ @Collection A set of definitions to support Header Manipulation selection.
+*/
+typedef uint32_t hdrManipFlags_t;
+ /**< A general type to define a HMan update command flags. */
+
+typedef hdrManipFlags_t ipv4HdrManipUpdateFlags_t;
+ /**< IPv4 protocol HMan update command flags. */
+
+#define HDR_MANIP_IPV4_TOS 0x80000000
+ /**< update TOS with the given value ('tos' field
+ of t_FmPcdManipHdrFieldUpdateIpv4) */
+#define HDR_MANIP_IPV4_ID 0x40000000
+ /**< update IP ID with the given value ('id' field
+ of t_FmPcdManipHdrFieldUpdateIpv4) */
+#define HDR_MANIP_IPV4_TTL 0x20000000
+ /**< Decrement TTL by 1 */
+#define HDR_MANIP_IPV4_SRC 0x10000000
+ /**< update IP source address with the given value
+ ('src' field of t_FmPcdManipHdrFieldUpdateIpv4) */
+#define HDR_MANIP_IPV4_DST 0x08000000
+ /**< update IP destination address with the given value
+ ('dst' field of t_FmPcdManipHdrFieldUpdateIpv4) */
+
+typedef hdrManipFlags_t ipv6HdrManipUpdateFlags_t; /**< IPv6 protocol HMan update command flags. */
+
+#define HDR_MANIP_IPV6_TC 0x80000000
+ /**< update Traffic Class address with the given value
+ ('trafficClass' field of t_FmPcdManipHdrFieldUpdateIpv6) */
+#define HDR_MANIP_IPV6_HL 0x40000000
+ /**< Decrement Hop Limit by 1 */
+#define HDR_MANIP_IPV6_SRC 0x20000000
+ /**< update IP source address with the given value
+ ('src' field of t_FmPcdManipHdrFieldUpdateIpv6) */
+#define HDR_MANIP_IPV6_DST 0x10000000
+ /**< update IP destination address with the given value
+ ('dst' field of t_FmPcdManipHdrFieldUpdateIpv6) */
+
+typedef hdrManipFlags_t tcpUdpHdrManipUpdateFlags_t;
+ /**< TCP/UDP protocol HMan update command flags. */
+
+#define HDR_MANIP_TCP_UDP_SRC 0x80000000
+ /**< update TCP/UDP source address with the given value
+ ('src' field of t_FmPcdManipHdrFieldUpdateTcpUdp) */
+#define HDR_MANIP_TCP_UDP_DST 0x40000000
+ /**< update TCP/UDP destination address with the given value
+ ('dst' field of t_FmPcdManipHdrFieldUpdateTcpUdp) */
+#define HDR_MANIP_TCP_UDP_CHECKSUM 0x20000000
+ /**< update TCP/UDP checksum */
+
+/* @} */
+
+/**
+ @Description A type used for returning the order of the key extraction.
+ each value in this array represents the index of the extraction
+ command as defined by the user in the initialization extraction array.
+ The valid size of this array is the user define number of extractions
+ required (also marked by the second '0' in this array).
+*/
+typedef uint8_t t_FmPcdKgKeyOrder[FM_PCD_KG_MAX_NUM_OF_EXTRACTS_PER_KEY];
+
+#if ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT))
+/**
+ @Description Enumeration type for selecting type of statistics mode
+*/
+typedef enum ioc_fm_pcd_stats_type_t {
+ e_FM_PCD_STATS_PER_FLOWID = 0
+ /**< Flow ID is used as index for getting statistics */
+} ioc_fm_pcd_stats_type_t;
+#endif /* ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) */
+
+/**
+ @Collection Definitions for CC statistics
+*/
+#if (DPAA_VERSION >= 11)
+#define FM_PCD_CC_STATS_MAX_NUM_OF_FLR 10
+ /* Maximal supported number of frame length ranges */
+#define FM_PCD_CC_STATS_FLR_SIZE 2
+ /* Size in bytes of a frame length range limit */
+#endif /* (DPAA_VERSION >= 11) */
+#define FM_PCD_CC_STATS_COUNTER_SIZE 4
+ /* Size in bytes of a frame length range counter */
+/* @} */
+
+/**
+ @Description Parameters for defining CC keys parameters
+ The driver supports two methods for CC node allocation: dynamic and static.
+ Static mode was created in order to prevent runtime alloc/free
+ of FMan memory (MURAM), which may cause fragmentation; in this mode,
+ the driver automatically allocates the memory according to
+ 'maxNumOfKeys' parameter. The driver calculates the maximal memory
+ size that may be used for this CC-Node taking into consideration
+ 'maskSupport' and 'statisticsMode' parameters.
+ When 'action' = e_FM_PCD_ACTION_INDEXED_LOOKUP in the extraction
+ parameters of this node, 'maxNumOfKeys' must be equal to 'numOfKeys'.
+ In dynamic mode, 'maxNumOfKeys' must be zero. At initialization,
+ all required structures are allocated according to 'numOfKeys'
+ parameter. During runtime modification, these structures are
+ re-allocated according to the updated number of keys.
+
+ Please note that 'action' and 'icIndxMask' mentioned in the
+ specific parameter explanations are passed in the extraction
+ parameters of the node (fields of extractCcParams.extractNonHdr).
+*/
+typedef struct t_KeysParams {
+ uint16_t maxNumOfKeys;
+ /**< Maximum number of keys that will (ever) be used in this CC-Node;
+ A value of zero may be used for dynamic memory allocation. */
+ bool maskSupport;
+ /**< This parameter is relevant only if a node is initialized with
+ 'action' = e_FM_PCD_ACTION_EXACT_MATCH and maxNumOfKeys > 0;
+ Should be TRUE to reserve table memory for key masks, even if
+ initial keys do not contain masks, or if the node was initialized
+ as 'empty' (without keys); this will allow user to add keys with
+ masks at runtime.
+ NOTE that if user want to use only global-masks (i.e. one common mask
+ for all the entries within this table, this parameter should set to 'FALSE'. */
+ ioc_fm_pcd_cc_stats_mode statisticsMode;
+ /**< Determines the supported statistics mode for all node's keys.
+ To enable statistics gathering, statistics should be enabled per
+ every key, using 'statisticsEn' in next engine parameters structure
+ of that key;
+ If 'maxNumOfKeys' is set, all required structures will be
+ preallocated for all keys. */
+#if (DPAA_VERSION >= 11)
+ uint16_t frameLengthRanges[FM_PCD_CC_STATS_MAX_NUM_OF_FLR];
+ /**< Relevant only for 'RMON' statistics mode
+ (this feature is supported only on B4860 device);
+ Holds a list of programmable thresholds - for each received frame,
+ its length in bytes is examined against these range thresholds and
+ the appropriate counter is incremented by 1 - for example, to belong
+ to range i, the following should hold:
+ range i-1 threshold < frame length <= range i threshold
+ Each range threshold must be larger then its preceding range
+ threshold, and last range threshold must be 0xFFFF. */
+#endif /* (DPAA_VERSION >= 11) */
+ uint16_t numOfKeys;
+ /**< Number of initial keys;
+ Note that in case of 'action' = e_FM_PCD_ACTION_INDEXED_LOOKUP,
+ this field should be power-of-2 of the number of bits that are
+ set in 'icIndxMask'. */
+ uint8_t keySize;
+ /**< Size of key - for extraction of type FULL_FIELD, 'keySize' has
+ to be the standard size of the selected key; For other extraction
+ types, 'keySize' has to be as size of extraction; When 'action' =
+ e_FM_PCD_ACTION_INDEXED_LOOKUP, 'keySize' must be 2. */
+ ioc_fm_pcd_cc_key_params_t keyParams[FM_PCD_MAX_NUM_OF_KEYS];
+ /**< An array with 'numOfKeys' entries, each entry specifies the
+ corresponding key parameters;
+ When 'action' = e_FM_PCD_ACTION_EXACT_MATCH, this value must not
+ exceed 255 (FM_PCD_MAX_NUM_OF_KEYS-1) as the last entry is saved
+ for the 'miss' entry. */
+ ioc_fm_pcd_cc_next_engine_params_t ccNextEngineParamsForMiss;
+ /**< Parameters for defining the next engine when a key is not matched;
+ Not relevant if action = e_FM_PCD_ACTION_INDEXED_LOOKUP. */
+} t_KeysParams;
+
+#if ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT))
+/**
+ @Description Parameters for defining an insertion manipulation
+ of type e_FM_PCD_MANIP_INSRT_TO_START_OF_FRAME_TEMPLATE
+*/
+typedef struct ioc_fm_pcd_manip_hdr_insrt_by_template_params_t {
+ uint8_t size; /**< Size of insert template to the start of the frame. */
+ uint8_t hdrTemplate[FM_PCD_MAX_MANIP_INSRT_TEMPLATE_SIZE];
+ /**< Array of the insertion template. */
+
+ bool modifyOuterIp;
+ /**< TRUE if user want to modify some fields in outer IP. */
+ struct {
+ uint16_t ipOuterOffset;
+ /**< Offset of outer IP in the insert template, relevant if modifyOuterIp = TRUE.*/
+ uint16_t dscpEcn;
+ /**< value of dscpEcn in IP outer, relevant if modifyOuterIp = TRUE.
+ in IPV4 dscpEcn only byte - it has to be adjusted to the right*/
+ bool udpPresent;
+ /**< TRUE if UDP is present in the insert template, relevant if modifyOuterIp = TRUE.*/
+ uint8_t udpOffset;
+ /**< Offset in the insert template of UDP, relevant
+ if modifyOuterIp = TRUE and udpPresent=TRUE.*/
+ uint8_t ipIdentGenId;
+ /**< Used by FMan-CTRL to calculate IP-identification field,
+ relevant if modifyOuterIp = TRUE.*/
+ bool recalculateLength;
+ /**< TRUE if recalculate length has to be performed due to the engines in the path
+ which can change the frame later, relevant if modifyOuterIp = TRUE.*/
+ struct {
+ uint8_t blockSize;
+ /**< The CAAM block-size; Used by FMan-CTRL to calculate the IP Total Length field.*/
+ uint8_t extraBytesAddedAlignedToBlockSize;
+ /**< Used by FMan-CTRL to calculate the IP Total Length field and UDP length*/
+ uint8_t extraBytesAddedNotAlignedToBlockSize;
+ /**< Used by FMan-CTRL to calculate the IP Total Length field and UDP length.*/
+ } recalculateLengthParams;
+ /**< Recalculate length parameters - relevant
+ if modifyOuterIp = TRUE and recalculateLength = TRUE */
+ } modifyOuterIpParams;
+ /**< Outer IP modification parameters - ignored if modifyOuterIp is FALSE */
+
+ bool modifyOuterVlan;
+ /**< TRUE if user wants to modify VPri field in the outer VLAN header*/
+ struct {
+ uint8_t vpri; /**< Value of VPri, relevant if modifyOuterVlan = TRUE
+ VPri only 3 bits, it has to be adjusted to the right*/
+ } modifyOuterVlanParams;
+} ioc_fm_pcd_manip_hdr_insrt_by_template_params_t;
+
+/**
+ @Description Parameters for defining CAPWAP fragmentation
+*/
+typedef struct ioc_capwap_fragmentation_params {
+ uint16_t sizeForFragmentation;
+ /**< if length of the frame is greater than this value,
+ CAPWAP fragmentation will be executed. */
+ bool headerOptionsCompr;
+ /**< TRUE - first fragment include the CAPWAP header options field,
+ and all other fragments exclude the CAPWAP options field,
+ FALSE - all fragments include CAPWAP header options field. */
+} ioc_capwap_fragmentation_params;
+
+/**
+ @Description Parameters for defining CAPWAP reassembly
+*/
+typedef struct ioc_capwap_reassembly_params {
+ uint16_t maxNumFramesInProcess;
+ /**< Number of frames which can be reassembled concurrently; must be power of 2.
+ In case numOfFramesPerHashEntry == e_FM_PCD_MANIP_FOUR_WAYS_HASH,
+ maxNumFramesInProcess has to be in the range of 4 - 512,
+ In case numOfFramesPerHashEntry == e_FM_PCD_MANIP_EIGHT_WAYS_HASH,
+ maxNumFramesInProcess has to be in the range of 8 - 2048 */
+
+ bool haltOnDuplicationFrag;
+ /**< If TRUE, reassembly process will be halted due to duplicated fragment,
+ and all processed fragments will be enqueued with error indication;
+ If FALSE, only duplicated fragments will be enqueued with error indication. */
+
+ e_FmPcdManipReassemTimeOutMode timeOutMode;
+ /**< Expiration delay initialized by the reassembly process */
+ uint32_t fqidForTimeOutFrames;
+ /**< FQID in which time out frames will enqueue during Time Out Process */
+ uint32_t timeoutRoutineRequestTime;
+ /**< Represents the time interval in microseconds between consecutive
+ timeout routine requests It has to be power of 2. */
+ uint32_t timeoutThresholdForReassmProcess;
+ /**< Time interval (microseconds) for marking frames in process as too old;
+ Frames in process are those for which at least one fragment was received
+ but not all fragments. */
+
+ e_FmPcdManipReassemWaysNumber numOfFramesPerHashEntry;
+ /**< Number of frames per hash entry (needed for the reassembly process) */
+} ioc_capwap_reassembly_params;
+
+/**
+ @Description Parameters for defining fragmentation/reassembly manipulation
+*/
+typedef struct ioc_fm_pcd_manip_frag_or_reasm_params_t {
+ bool frag; /**< TRUE if using the structure for fragmentation,
+ otherwise this structure is used for reassembly */
+ uint8_t sgBpid; /**< Scatter/Gather buffer pool id;
+ Same LIODN number is used for these buffers as for
+ the received frames buffers, so buffers of this pool
+ need to be allocated in the same memory area as the
+ received buffers. If the received buffers arrive
+ from different sources, the Scatter/Gather BP id
+ should be mutual to all these sources. */
+ ioc_net_header_type hdr; /**< Header selection */
+ union {
+ ioc_capwap_fragmentation_params capwapFragParams;
+ /**< Structure for CAPWAP fragmentation,
+ relevant if 'frag' = TRUE, 'hdr' = HEADER_TYPE_CAPWAP */
+ ioc_capwap_reassembly_params capwapReasmParams;
+ /**< Structure for CAPWAP reassembly,
+ relevant if 'frag' = FALSE, 'hdr' = HEADER_TYPE_CAPWAP */
+ } u;
+} ioc_fm_pcd_manip_frag_or_reasm_params_t;
+#endif /* ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) */
+
+/**
+ @Description Parameters for defining custom header manipulation for generic field replacement
+*/
+typedef struct ioc_fm_pcd_manip_hdr_custom_gen_field_replace {
+ uint8_t srcOffset; /**< Location of new data - Offset from
+ Parse Result (>= 16, srcOffset+size <= 32, ) */
+ uint8_t dstOffset; /**< Location of data to be overwritten - Offset from
+ start of frame (dstOffset + size <= 256). */
+ uint8_t size; /**< The number of bytes (<=16) to be replaced */
+ uint8_t mask; /**< Optional 1 byte mask. Set to select bits for
+ replacement (1 - bit will be replaced);
+ Clear to use field as is. */
+ uint8_t maskOffset; /**< Relevant if mask != 0;
+ Mask offset within the replaces "size" */
+} ioc_fm_pcd_manip_hdr_custom_gen_field_replace;
+
+#if ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT))
+/**
+ @Description structure for defining statistics node
+*/
+typedef struct ioc_fm_pcd_stats_params_t {
+ ioc_fm_pcd_stats_type_t type; /**< type of statistics node */
+} ioc_fm_pcd_stats_params_t;
+#endif /* ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) */
+
+/**
+ @Function FM_PCD_NetEnvCharacteristicsSet
+
+ @Description Define a set of Network Environment Characteristics.
+
+ When setting an environment it is important to understand its
+ application. It is not meant to describe the flows that will run
+ on the ports using this environment, but what the user means TO DO
+ with the PCD mechanisms in order to parse-classify-distribute those
+ frames.
+ By specifying a distinction unit, the user means it would use that option
+ for distinction between frames at either a KeyGen scheme or a coarse
+ classification action descriptor. Using interchangeable headers to define a
+ unit means that the user is indifferent to which of the interchangeable
+ headers is present in the frame, and wants the distinction to be based
+ on the presence of either one of them.
+
+ Depending on context, there are limitations to the use of environments. A
+ port using the PCD functionality is bound to an environment. Some or even
+ all ports may share an environment but also an environment per port is
+ possible. When initializing a scheme, a classification plan group (see below),
+ or a coarse classification tree, one of the initialized environments must be
+ stated and related to. When a port is bound to a scheme, a classification
+ plan group, or a coarse classification tree, it MUST be bound to the same
+ environment.
+
+ The different PCD modules, may relate (for flows definition) ONLY on
+ distinction units as defined by their environment. When initializing a
+ scheme for example, it may not choose to select IPV4 as a match for
+ recognizing flows unless it was defined in the relating environment. In
+ fact, to guide the user through the configuration of the PCD, each module's
+ characterization in terms of flows is not done using protocol names, but using
+ environment indexes.
+
+ In terms of HW implementation, the list of distinction units sets the LCV
+ vectors and later used for match vector, classification plan vectors and
+ coarse classification indexing.
+
+ @Param[in] h_FmPcd FM PCD module descriptor.
+ @Param[in] p_NetEnvParams A structure of parameters for the initialization of
+ the network environment.
+
+ @Return A handle to the initialized object on success; NULL code otherwise.
+
+ @Cautions Allowed only following FM_PCD_Init().
+*/
+t_Handle FM_PCD_NetEnvCharacteristicsSet(t_Handle,
+ ioc_fm_pcd_net_env_params_t *);
+
+/**
+ @Function FM_PCD_NetEnvCharacteristicsDelete
+
+ @Description Deletes a set of Network Environment Characteristics.
+
+ @Param[in] h_NetEnv A handle to the Network environment.
+
+ @Return E_OK on success; Error code otherwise.
+*/
+uint32_t FM_PCD_NetEnvCharacteristicsDelete(t_Handle h_NetEnv);
+
+/**
+ @Function FM_PCD_KgSchemeSet
+
+ @Description Initializing or modifying and enabling a scheme for the KeyGen.
+ This routine should be called for adding or modifying a scheme.
+ When a scheme needs modifying, the API requires that it will be
+ rewritten. In such a case 'modify' should be TRUE. If the
+ routine is called for a valid scheme and 'modify' is FALSE,
+ it will return error.
+
+ @Param[in] h_FmPcd If this is a new scheme - A handle to an FM PCD Module.
+ Otherwise NULL (ignored by driver).
+ @Param[in,out] p_SchemeParams A structure of parameters for defining the scheme
+
+ @Return A handle to the initialized scheme on success; NULL code otherwise.
+ When used as "modify" (rather than for setting a new scheme),
+ p_SchemeParams->id.h_Scheme will return NULL if action fails due to scheme
+ BUSY state.
+
+ @Cautions Allowed only following FM_PCD_Init().
+*/
+t_Handle FM_PCD_KgSchemeSet(t_Handle h_FmPcd,
+ ioc_fm_pcd_kg_scheme_params_t *p_SchemeParams);
+
+/**
+ @Function FM_PCD_KgSchemeDelete
+
+ @Description Deleting an initialized scheme.
+
+ @Param[in] h_Scheme scheme handle as returned by FM_PCD_KgSchemeSet()
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_Init() & FM_PCD_KgSchemeSet().
+*/
+uint32_t FM_PCD_KgSchemeDelete(t_Handle h_Scheme);
+
+/**
+ @Function FM_PCD_KgSchemeGetCounter
+
+ @Description Reads scheme packet counter.
+
+ @Param[in] h_Scheme scheme handle as returned by FM_PCD_KgSchemeSet().
+
+ @Return Counter's current value.
+
+ @Cautions Allowed only following FM_PCD_Init() & FM_PCD_KgSchemeSet().
+*/
+uint32_t FM_PCD_KgSchemeGetCounter(t_Handle h_Scheme);
+
+/**
+ @Function FM_PCD_KgSchemeSetCounter
+
+ @Description Writes scheme packet counter.
+
+ @Param[in] h_Scheme scheme handle as returned by FM_PCD_KgSchemeSet().
+ @Param[in] value New scheme counter value - typically '0' for
+ resetting the counter.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_Init() & FM_PCD_KgSchemeSet().
+*/
+uint32_t FM_PCD_KgSchemeSetCounter(t_Handle h_Scheme,
+ uint32_t value);
+
+/**
+ @Function FM_PCD_PlcrProfileSet
+
+ @Description Sets a profile entry in the policer profile table.
+ The routine overrides any existing value.
+
+ @Param[in] h_FmPcd A handle to an FM PCD Module.
+ @Param[in] p_Profile A structure of parameters for defining a
+ policer profile entry.
+
+ @Return A handle to the initialized object on success; NULL code otherwise.
+ When used as "modify" (rather than for setting a new profile),
+ p_Profile->id.h_Profile will return NULL if action fails due to profile
+ BUSY state.
+ @Cautions Allowed only following FM_PCD_Init().
+*/
+t_Handle FM_PCD_PlcrProfileSet(t_Handle h_FmPcd,
+ ioc_fm_pcd_plcr_profile_params_t *p_Profile);
+
+/**
+ @Function FM_PCD_PlcrProfileDelete
+
+ @Description Delete a profile entry in the policer profile table.
+ The routine set entry to invalid.
+
+ @Param[in] h_Profile A handle to the profile.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_Init().
+*/
+uint32_t FM_PCD_PlcrProfileDelete(t_Handle h_Profile);
+
+/**
+ @Function FM_PCD_PlcrProfileGetCounter
+
+ @Description Sets an entry in the classification plan.
+ The routine overrides any existing value.
+
+ @Param[in] h_Profile A handle to the profile.
+ @Param[in] counter Counter selector.
+
+ @Return specific counter value.
+
+ @Cautions Allowed only following FM_PCD_Init().
+*/
+uint32_t FM_PCD_PlcrProfileGetCounter(t_Handle h_Profile,
+ ioc_fm_pcd_plcr_profile_counters counter);
+
+/**
+ @Function FM_PCD_PlcrProfileSetCounter
+
+ @Description Sets an entry in the classification plan.
+ The routine overrides any existing value.
+
+ @Param[in] h_Profile A handle to the profile.
+ @Param[in] counter Counter selector.
+ @Param[in] value value to set counter with.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_Init().
+*/
+uint32_t FM_PCD_PlcrProfileSetCounter(t_Handle h_Profile,
+ ioc_fm_pcd_plcr_profile_counters counter,
+ uint32_t value);
+
+/**
+ @Function FM_PCD_CcRootBuild
+
+ @Description This routine must be called to define a complete coarse
+ classification tree. This is the way to define coarse
+ classification to a certain flow - the KeyGen schemes
+ may point only to trees defined in this way.
+
+ @Param[in] h_FmPcd FM PCD module descriptor.
+ @Param[in] p_Params A structure of parameters to define the tree.
+
+ @Return A handle to the initialized object on success; NULL code otherwise.
+
+ @Cautions Allowed only following FM_PCD_Init().
+*/
+t_Handle FM_PCD_CcRootBuild(t_Handle h_FmPcd,
+ ioc_fm_pcd_cc_tree_params_t *p_Params);
+
+/**
+ @Function FM_PCD_CcRootDelete
+
+ @Description Deleting an built tree.
+
+ @Param[in] h_CcTree A handle to a CC tree.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_Init().
+*/
+uint32_t FM_PCD_CcRootDelete(t_Handle h_CcTree);
+
+/**
+ @Function FM_PCD_CcRootModifyNextEngine
+
+ @Description Modify the Next Engine Parameters in the entry of the tree.
+
+ @Param[in] h_CcTree A handle to the tree
+ @Param[in] grpId A Group index in the tree
+ @Param[in] index Entry index in the group defined by grpId
+ @Param[in] p_FmPcdCcNextEngineParams Pointer to new next engine parameters
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_CcBuildTree().
+*/
+uint32_t FM_PCD_CcRootModifyNextEngine(t_Handle h_CcTree,
+ uint8_t grpId,
+ uint8_t index,
+ ioc_fm_pcd_cc_next_engine_params_t *p_FmPcdCcNextEngineParams);
+
+/**
+ @Function FM_PCD_MatchTableSet
+
+ @Description This routine should be called for each CC (coarse classification)
+ node. The whole CC tree should be built bottom up so that each
+ node points to already defined nodes.
+
+ @Param[in] h_FmPcd FM PCD module descriptor.
+ @Param[in] p_Param A structure of parameters defining the CC node
+
+ @Return A handle to the initialized object on success; NULL code otherwise.
+
+ @Cautions Allowed only following FM_PCD_Init().
+*/
+t_Handle FM_PCD_MatchTableSet(t_Handle h_FmPcd,
+ ioc_fm_pcd_cc_node_params_t *p_Param);
+
+/**
+ @Function FM_PCD_MatchTableDelete
+
+ @Description Deleting an built node.
+
+ @Param[in] h_CcNode A handle to a CC node.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_Init().
+*/
+uint32_t FM_PCD_MatchTableDelete(t_Handle h_CcNode);
+
+/**
+ @Function FM_PCD_MatchTableModifyMissNextEngine
+
+ @Description Modify the Next Engine Parameters of the Miss key case of the node.
+
+ @Param[in] h_CcNode A handle to the node
+ @Param[in] p_FmPcdCcNextEngineParams Parameters for defining next engine
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_MatchTableSet();
+ Not relevant in the case the node is of type 'INDEXED_LOOKUP'.
+ When configuring nextEngine = e_FM_PCD_CC, note that
+ p_FmPcdCcNextEngineParams->ccParams.h_CcNode must be different
+ from the currently changed table.
+
+*/
+uint32_t FM_PCD_MatchTableModifyMissNextEngine(t_Handle h_CcNode,
+ ioc_fm_pcd_cc_next_engine_params_t *p_FmPcdCcNextEngineParams);
+
+/**
+ @Function FM_PCD_MatchTableRemoveKey
+
+ @Description Remove the key (including next engine parameters of this key)
+ defined by the index of the relevant node.
+
+ @Param[in] h_CcNode A handle to the node
+ @Param[in] keyIndex Key index for removing
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_MatchTableSet() was called for this
+ node and the nodes that lead to it.
+*/
+uint32_t FM_PCD_MatchTableRemoveKey(t_Handle h_CcNode,
+ uint16_t keyIndex);
+
+/**
+ @Function FM_PCD_MatchTableAddKey
+
+ @Description Add the key (including next engine parameters of this key in the
+ index defined by the keyIndex. Note that 'FM_PCD_LAST_KEY_INDEX'
+ may be used by user that don't care about the position of the
+ key in the table - in that case, the key will be automatically
+ added by the driver in the last available entry.
+
+ @Param[in] h_CcNode A handle to the node
+ @Param[in] keyIndex Key index for adding.
+ @Param[in] keySize Key size of added key
+ @Param[in] p_KeyParams A pointer to the parameters includes
+ new key with Next Engine Parameters
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_MatchTableSet() was called for this
+ node and the nodes that lead to it.
+*/
+uint32_t FM_PCD_MatchTableAddKey(t_Handle h_CcNode,
+ uint16_t keyIndex,
+ uint8_t keySize,
+ ioc_fm_pcd_cc_key_params_t *p_KeyParams);
+
+/**
+ @Function FM_PCD_MatchTableModifyNextEngine
+
+ @Description Modify the Next Engine Parameters in the relevant key entry of the node.
+
+ @Param[in] h_CcNode A handle to the node
+ @Param[in] keyIndex Key index for Next Engine modifications
+ @Param[in] p_FmPcdCcNextEngineParams Parameters for defining next engine
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_MatchTableSet().
+ When configuring nextEngine = e_FM_PCD_CC, note that
+ p_FmPcdCcNextEngineParams->ccParams.h_CcNode must be different
+ from the currently changed table.
+
+*/
+uint32_t FM_PCD_MatchTableModifyNextEngine(t_Handle h_CcNode,
+ uint16_t keyIndex,
+ ioc_fm_pcd_cc_next_engine_params_t *p_FmPcdCcNextEngineParams);
+
+/**
+ @Function FM_PCD_MatchTableModifyKeyAndNextEngine
+
+ @Description Modify the key and Next Engine Parameters of this key in the
+ index defined by the keyIndex.
+
+ @Param[in] h_CcNode A handle to the node
+ @Param[in] keyIndex Key index for adding
+ @Param[in] keySize Key size of added key
+ @Param[in] p_KeyParams A pointer to the parameters includes
+ modified key and modified Next Engine Params
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_MatchTableSet() was called for this
+ node and the nodes that lead to it.
+ When configuring nextEngine = e_FM_PCD_CC, note that
+ p_FmPcdCcNextEngineParams->ccParams.h_CcNode must be different
+ from the currently changed table.
+*/
+uint32_t FM_PCD_MatchTableModifyKeyAndNextEngine(t_Handle h_CcNode,
+ uint16_t keyIndex,
+ uint8_t keySize,
+ ioc_fm_pcd_cc_key_params_t *p_KeyParams);
+
+/**
+ @Function FM_PCD_MatchTableModifyKey
+
+ @Description Modify the key in the index defined by the keyIndex.
+
+ @Param[in] h_CcNode A handle to the node
+ @Param[in] keyIndex Key index for adding
+ @Param[in] keySize Key size of added key
+ @Param[in] p_Key A pointer to the new key
+ @Param[in] p_Mask A pointer to the new mask if relevant,
+ otherwise pointer to NULL
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_MatchTableSet() was called for this
+ node and the nodes that lead to it.
+*/
+uint32_t FM_PCD_MatchTableModifyKey(t_Handle h_CcNode,
+ uint16_t keyIndex,
+ uint8_t keySize,
+ uint8_t *p_Key,
+ uint8_t *p_Mask);
+
+/**
+ @Function FM_PCD_MatchTableFindNRemoveKey
+
+ @Description Remove the key (including next engine parameters of this key)
+ defined by the key and mask. Note that this routine will search
+ the node to locate the index of the required key (& mask) to remove.
+
+ @Param[in] h_CcNode A handle to the node
+ @Param[in] keySize Key size of the one to remove.
+ @Param[in] p_Key A pointer to the requested key to remove.
+ @Param[in] p_Mask A pointer to the mask if relevant,
+ otherwise pointer to NULL
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_MatchTableSet() was called for this
+ node and the nodes that lead to it.
+*/
+uint32_t FM_PCD_MatchTableFindNRemoveKey(t_Handle h_CcNode,
+ uint8_t keySize,
+ uint8_t *p_Key,
+ uint8_t *p_Mask);
+
+/**
+ @Function FM_PCD_MatchTableFindNModifyNextEngine
+
+ @Description Modify the Next Engine Parameters in the relevant key entry of
+ the node. Note that this routine will search the node to locate
+ the index of the required key (& mask) to modify.
+
+ @Param[in] h_CcNode A handle to the node
+ @Param[in] keySize Key size of the one to modify.
+ @Param[in] p_Key A pointer to the requested key to modify.
+ @Param[in] p_Mask A pointer to the mask if relevant,
+ otherwise pointer to NULL
+ @Param[in] p_FmPcdCcNextEngineParams Parameters for defining next engine
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_MatchTableSet().
+ When configuring nextEngine = e_FM_PCD_CC, note that
+ p_FmPcdCcNextEngineParams->ccParams.h_CcNode must be different
+ from the currently changed table.
+*/
+uint32_t FM_PCD_MatchTableFindNModifyNextEngine(t_Handle h_CcNode,
+ uint8_t keySize,
+ uint8_t *p_Key,
+ uint8_t *p_Mask,
+ ioc_fm_pcd_cc_next_engine_params_t *p_FmPcdCcNextEngineParams);
+
+/**
+ @Function FM_PCD_MatchTableFindNModifyKeyAndNextEngine
+
+ @Description Modify the key and Next Engine Parameters of this key in the
+ index defined by the keyIndex. Note that this routine will search
+ the node to locate the index of the required key (& mask) to modify.
+
+ @Param[in] h_CcNode A handle to the node
+ @Param[in] keySize Key size of the one to modify.
+ @Param[in] p_Key A pointer to the requested key to modify.
+ @Param[in] p_Mask A pointer to the mask if relevant,
+ otherwise pointer to NULL
+ @Param[in] p_KeyParams A pointer to the parameters includes
+ modified key and modified Next Engine Params
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_MatchTableSet() was called for this
+ node and the nodes that lead to it.
+ When configuring nextEngine = e_FM_PCD_CC, note that
+ p_FmPcdCcNextEngineParams->ccParams.h_CcNode must be different
+ from the currently changed table.
+*/
+uint32_t FM_PCD_MatchTableFindNModifyKeyAndNextEngine(
+ t_Handle h_CcNode,
+ uint8_t keySize,
+ uint8_t *p_Key,
+ uint8_t *p_Mask,
+ ioc_fm_pcd_cc_key_params_t *p_KeyParams);
+
+/**
+ @Function FM_PCD_MatchTableFindNModifyKey
+
+ @Description Modify the key in the index defined by the keyIndex. Note that
+ this routine will search the node to locate the index of the
+ required key (& mask) to modify.
+
+ @Param[in] h_CcNode A handle to the node
+ @Param[in] keySize Key size of the one to modify.
+ @Param[in] p_Key A pointer to the requested key to modify.
+ @Param[in] p_Mask A pointer to the mask if relevant,
+ otherwise pointer to NULL
+ @Param[in] p_NewKey A pointer to the new key
+ @Param[in] p_NewMask A pointer to the new mask if relevant,
+ otherwise pointer to NULL
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_MatchTableSet() was called for this
+ node and the nodes that lead to it.
+*/
+uint32_t FM_PCD_MatchTableFindNModifyKey(t_Handle h_CcNode,
+ uint8_t keySize,
+ uint8_t *p_Key,
+ uint8_t *p_Mask,
+ uint8_t *p_NewKey,
+ uint8_t *p_NewMask);
+
+/**
+ @Function FM_PCD_MatchTableGetKeyCounter
+
+ @Description This routine may be used to get a counter of specific key in a CC
+ Node; This counter reflects how many frames passed that were matched
+ this key.
+
+ @Param[in] h_CcNode A handle to the node
+ @Param[in] keyIndex Key index for adding
+
+ @Return The specific key counter.
+
+ @Cautions Allowed only following FM_PCD_MatchTableSet().
+*/
+uint32_t FM_PCD_MatchTableGetKeyCounter(t_Handle h_CcNode,
+ uint16_t keyIndex);
+
+/**
+ @Function FM_PCD_MatchTableGetKeyStatistics
+
+ @Description This routine may be used to get statistics counters of specific key
+ in a CC Node.
+
+ If 'e_FM_PCD_CC_STATS_MODE_FRAME' and
+ 'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this node,
+ these counters reflect how many frames passed that were matched
+ this key; The total frames count will be returned in the counter
+ of the first range (as only one frame length range was defined).
+ If 'e_FM_PCD_CC_STATS_MODE_RMON' was set for this node, the total
+ frame count will be separated to frame length counters, based on
+ provided frame length ranges.
+
+ @Param[in] h_CcNode A handle to the node
+ @Param[in] keyIndex Key index for adding
+ @Param[out] p_KeyStatistics Key statistics counters
+
+ @Return The specific key statistics.
+
+ @Cautions Allowed only following FM_PCD_MatchTableSet().
+*/
+uint32_t FM_PCD_MatchTableGetKeyStatistics(t_Handle h_CcNode,
+ uint16_t keyIndex,
+ ioc_fm_pcd_cc_key_statistics_t *p_KeyStatistics);
+
+/**
+ @Function FM_PCD_MatchTableGetMissStatistics
+
+ @Description This routine may be used to get statistics counters of miss entry
+ in a CC Node.
+
+ If 'e_FM_PCD_CC_STATS_MODE_FRAME' and
+ 'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this node,
+ these counters reflect how many frames were not matched to any
+ existing key and therefore passed through the miss entry; The
+ total frames count will be returned in the counter of the
+ first range (as only one frame length range was defined).
+
+ @Param[in] h_CcNode A handle to the node
+ @Param[out] p_MissStatistics Statistics counters for 'miss'
+
+ @Return The statistics for 'miss'.
+
+ @Cautions Allowed only following FM_PCD_MatchTableSet().
+*/
+uint32_t FM_PCD_MatchTableGetMissStatistics(t_Handle h_CcNode,
+ ioc_fm_pcd_cc_key_statistics_t *p_MissStatistics);
+
+/**
+ @Function FM_PCD_MatchTableFindNGetKeyStatistics
+
+ @Description This routine may be used to get statistics counters of specific key
+ in a CC Node.
+
+ If 'e_FM_PCD_CC_STATS_MODE_FRAME' and
+ 'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this node,
+ these counters reflect how many frames passed that were matched
+ this key; The total frames count will be returned in the counter
+ of the first range (as only one frame length range was defined).
+ If 'e_FM_PCD_CC_STATS_MODE_RMON' was set for this node, the total
+ frame count will be separated to frame length counters, based on
+ provided frame length ranges.
+ Note that this routine will search the node to locate the index
+ of the required key based on received key parameters.
+
+ @Param[in] h_CcNode A handle to the node
+ @Param[in] keySize Size of the requested key
+ @Param[in] p_Key A pointer to the requested key
+ @Param[in] p_Mask A pointer to the mask if relevant,
+ otherwise pointer to NULL
+ @Param[out] p_KeyStatistics Key statistics counters
+
+ @Return The specific key statistics.
+
+ @Cautions Allowed only following FM_PCD_MatchTableSet().
+*/
+uint32_t FM_PCD_MatchTableFindNGetKeyStatistics(t_Handle h_CcNode,
+ uint8_t keySize,
+ uint8_t *p_Key,
+ uint8_t *p_Mask,
+ ioc_fm_pcd_cc_key_statistics_t *p_KeyStatistics);
+
+/*
+ @Function FM_PCD_MatchTableGetNextEngine
+
+ @Description Gets NextEngine of the relevant keyIndex.
+
+ @Param[in] h_CcNode A handle to the node.
+ @Param[in] keyIndex keyIndex in the relevant node.
+ @Param[out] p_FmPcdCcNextEngineParams here updated nextEngine parameters for
+ the relevant keyIndex of the CC Node
+ received as parameter to this function
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_Init().
+*/
+uint32_t FM_PCD_MatchTableGetNextEngine(t_Handle h_CcNode,
+ uint16_t keyIndex,
+ ioc_fm_pcd_cc_next_engine_params_t *p_FmPcdCcNextEngineParams);
+
+/*
+ @Function FM_PCD_MatchTableGetIndexedHashBucket
+
+ @Description This routine simulates KeyGen operation on the provided key and
+ calculates to which hash bucket it will be mapped.
+
+ @Param[in] h_CcNode A handle to the node.
+ @Param[in] kgKeySize Key size as it was configured in the KG
+ scheme that leads to this hash.
+ @Param[in] p_KgKey Pointer to the key; must be like the key
+ that the KG is generated, i.e. the same
+ extraction and with mask if exist.
+ @Param[in] kgHashShift Hash-shift as it was configured in the KG
+ scheme that leads to this hash.
+ @Param[out] p_CcNodeBucketHandle Pointer to the bucket of the provided key.
+ @Param[out] p_BucketIndex Index to the bucket of the provided key
+ @Param[out] p_LastIndex Pointer to last index in the bucket of the
+ provided key.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_HashTableSet()
+*/
+uint32_t FM_PCD_MatchTableGetIndexedHashBucket(t_Handle h_CcNode,
+ uint8_t kgKeySize,
+ uint8_t *p_KgKey,
+ uint8_t kgHashShift,
+ t_Handle *p_CcNodeBucketHandle,
+ uint8_t *p_BucketIndex,
+ uint16_t *p_LastIndex);
+
+/**
+ @Function FM_PCD_HashTableSet
+
+ @Description This routine initializes a hash table structure.
+ KeyGen hash result determines the hash bucket.
+ Next, KeyGen key is compared against all keys of this
+ bucket (exact match).
+ Number of sets (number of buckets) of the hash equals to the
+ number of 1-s in 'hashResMask' in the provided parameters.
+ Number of hash table ways is then calculated by dividing
+ 'maxNumOfKeys' equally between the hash sets. This is the maximal
+ number of keys that a hash bucket may hold.
+ The hash table is initialized empty and keys may be
+ added to it following the initialization. Keys masks are not
+ supported in current hash table implementation.
+ The initialized hash table can be integrated as a node in a
+ CC tree.
+
+ @Param[in] h_FmPcd FM PCD module descriptor.
+ @Param[in] p_Param A structure of parameters defining the hash table
+
+ @Return A handle to the initialized object on success; NULL code otherwise.
+
+ @Cautions Allowed only following FM_PCD_Init().
+*/
+t_Handle FM_PCD_HashTableSet(t_Handle h_FmPcd,
+ ioc_fm_pcd_hash_table_params_t *p_Param);
+
+/**
+ @Function FM_PCD_HashTableDelete
+
+ @Description This routine deletes the provided hash table and released all
+ its allocated resources.
+
+ @Param[in] h_HashTbl A handle to a hash table
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_HashTableSet().
+*/
+uint32_t FM_PCD_HashTableDelete(t_Handle h_HashTbl);
+
+/**
+ @Function FM_PCD_HashTableAddKey
+
+ @Description This routine adds the provided key (including next engine
+ parameters of this key) to the hash table.
+ The key is added as the last key of the bucket that it is
+ mapped to.
+
+ @Param[in] h_HashTbl A handle to a hash table
+ @Param[in] keySize Key size of added key
+ @Param[in] p_KeyParams A pointer to the parameters includes
+ new key with next engine parameters; The pointer
+ to the key mask must be NULL, as masks are not
+ supported in hash table implementation.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_HashTableSet().
+*/
+uint32_t FM_PCD_HashTableAddKey(t_Handle h_HashTbl,
+ uint8_t keySize,
+ ioc_fm_pcd_cc_key_params_t *p_KeyParams);
+
+/**
+ @Function FM_PCD_HashTableRemoveKey
+
+ @Description This routine removes the requested key (including next engine
+ parameters of this key) from the hash table.
+
+ @Param[in] h_HashTbl A handle to a hash table
+ @Param[in] keySize Key size of the one to remove.
+ @Param[in] p_Key A pointer to the requested key to remove.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_HashTableSet().
+*/
+uint32_t FM_PCD_HashTableRemoveKey(t_Handle h_HashTbl,
+ uint8_t keySize,
+ uint8_t *p_Key);
+
+/**
+ @Function FM_PCD_HashTableModifyNextEngine
+
+ @Description This routine modifies the next engine for the provided key. The
+ key should be previously added to the hash table.
+
+ @Param[in] h_HashTbl A handle to a hash table
+ @Param[in] keySize Key size of the key to modify.
+ @Param[in] p_Key A pointer to the requested key to modify.
+ @Param[in] p_FmPcdCcNextEngineParams A structure for defining new next engine
+ parameters.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_HashTableSet().
+ When configuring nextEngine = e_FM_PCD_CC, note that
+ p_FmPcdCcNextEngineParams->ccParams.h_CcNode must be different
+ from the currently changed table.
+*/
+uint32_t FM_PCD_HashTableModifyNextEngine(t_Handle h_HashTbl,
+ uint8_t keySize,
+ uint8_t *p_Key,
+ ioc_fm_pcd_cc_next_engine_params_t *p_FmPcdCcNextEngineParams);
+
+/**
+ @Function FM_PCD_HashTableModifyMissNextEngine
+
+ @Description This routine modifies the next engine on key match miss.
+
+ @Param[in] h_HashTbl A handle to a hash table
+ @Param[in] p_FmPcdCcNextEngineParams A structure for defining new next engine
+ parameters.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_HashTableSet().
+ When configuring nextEngine = e_FM_PCD_CC, note that
+ p_FmPcdCcNextEngineParams->ccParams.h_CcNode must be different
+ from the currently changed table.
+*/
+uint32_t FM_PCD_HashTableModifyMissNextEngine(t_Handle h_HashTbl,
+ ioc_fm_pcd_cc_next_engine_params_t *p_FmPcdCcNextEngineParams);
+
+/*
+ @Function FM_PCD_HashTableGetMissNextEngine
+
+ @Description Gets NextEngine in case of key match miss.
+
+ @Param[in] h_HashTbl A handle to a hash table
+ @Param[out] p_FmPcdCcNextEngineParams Next engine parameters for the specified
+ hash table.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_HashTableSet().
+*/
+uint32_t FM_PCD_HashTableGetMissNextEngine(t_Handle h_HashTbl,
+ ioc_fm_pcd_cc_next_engine_params_t *p_FmPcdCcNextEngineParams);
+
+/**
+ @Function FM_PCD_HashTableFindNGetKeyStatistics
+
+ @Description This routine may be used to get statistics counters of specific key
+ in a hash table.
+
+ If 'e_FM_PCD_CC_STATS_MODE_FRAME' and
+ 'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this node,
+ these counters reflect how many frames passed that were matched
+ this key; The total frames count will be returned in the counter
+ of the first range (as only one frame length range was defined).
+ If 'e_FM_PCD_CC_STATS_MODE_RMON' was set for this node, the total
+ frame count will be separated to frame length counters, based on
+ provided frame length ranges.
+ Note that this routine will identify the bucket of this key in
+ the hash table and will search the bucket to locate the index
+ of the required key based on received key parameters.
+
+ @Param[in] h_HashTbl A handle to a hash table
+ @Param[in] keySize Size of the requested key
+ @Param[in] p_Key A pointer to the requested key
+ @Param[out] p_KeyStatistics Key statistics counters
+
+ @Return The specific key statistics.
+
+ @Cautions Allowed only following FM_PCD_HashTableSet().
+*/
+uint32_t FM_PCD_HashTableFindNGetKeyStatistics(t_Handle h_HashTbl,
+ uint8_t keySize,
+ uint8_t *p_Key,
+ ioc_fm_pcd_cc_key_statistics_t *p_KeyStatistics);
+
+/**
+ @Function FM_PCD_HashTableGetMissStatistics
+
+ @Description This routine may be used to get statistics counters of 'miss'
+ entry of the a hash table.
+
+ If 'e_FM_PCD_CC_STATS_MODE_FRAME' and
+ 'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this node,
+ these counters reflect how many frames were not matched to any
+ existing key and therefore passed through the miss entry;
+
+ @Param[in] h_HashTbl A handle to a hash table
+ @Param[out] p_MissStatistics Statistics counters for 'miss'
+
+ @Return The statistics for 'miss'.
+
+ @Cautions Allowed only following FM_PCD_HashTableSet().
+*/
+uint32_t FM_PCD_HashTableGetMissStatistics(t_Handle h_HashTbl,
+ ioc_fm_pcd_cc_key_statistics_t *p_MissStatistics);
+
+/**
+ @Function FM_PCD_ManipNodeSet
+
+ @Description This routine should be called for defining a manipulation
+ node. A manipulation node must be defined before the CC node
+ that precedes it.
+
+ @Param[in] h_FmPcd FM PCD module descriptor.
+ @Param[in] p_FmPcdManipParams A structure of parameters defining the manipulation
+
+ @Return A handle to the initialized object on success; NULL code otherwise.
+
+ @Cautions Allowed only following FM_PCD_Init().
+*/
+t_Handle FM_PCD_ManipNodeSet(t_Handle h_FmPcd,
+ ioc_fm_pcd_manip_params_t *p_FmPcdManipParams);
+
+/**
+ @Function FM_PCD_ManipNodeDelete
+
+ @Description Delete an existing manipulation node.
+
+ @Param[in] h_ManipNode A handle to a manipulation node.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_ManipNodeSet().
+*/
+uint32_t FM_PCD_ManipNodeDelete(t_Handle h_ManipNode);
+
+/**
+ @Function FM_PCD_ManipGetStatistics
+
+ @Description Retrieve the manipulation statistics.
+
+ @Param[in] h_ManipNode A handle to a manipulation node.
+ @Param[out] p_FmPcdManipStats A structure for retrieving the manipulation statistics
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_ManipNodeSet().
+*/
+uint32_t FM_PCD_ManipGetStatistics(t_Handle h_ManipNode,
+ ioc_fm_pcd_manip_stats_t *p_FmPcdManipStats);
+
+/**
+ @Function FM_PCD_ManipNodeReplace
+
+ @Description Change existing manipulation node to be according to new requirement.
+
+ @Param[in] h_ManipNode A handle to a manipulation node.
+ @Param[out] p_ManipParams A structure of parameters defining the change requirement
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_ManipNodeSet().
+*/
+uint32_t FM_PCD_ManipNodeReplace(t_Handle h_ManipNode,
+ioc_fm_pcd_manip_params_t *p_ManipParams);
+
+#if (DPAA_VERSION >= 11)
+/**
+ @Function FM_PCD_FrmReplicSetGroup
+
+ @Description Initialize a Frame Replicator group.
+
+ @Param[in] h_FmPcd FM PCD module descriptor.
+ @Param[in] p_FrmReplicGroupParam A structure of parameters for the initialization of
+ the frame replicator group.
+
+ @Return A handle to the initialized object on success; NULL code otherwise.
+
+ @Cautions Allowed only following FM_PCD_Init().
+*/
+t_Handle FM_PCD_FrmReplicSetGroup(t_Handle h_FmPcd,
+ ioc_fm_pcd_frm_replic_group_params_t *p_FrmReplicGroupParam);
+
+/**
+ @Function FM_PCD_FrmReplicDeleteGroup
+
+ @Description Delete a Frame Replicator group.
+
+ @Param[in] h_FrmReplicGroup A handle to the frame replicator group.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_FrmReplicSetGroup().
+*/
+uint32_t FM_PCD_FrmReplicDeleteGroup(t_Handle h_FrmReplicGroup);
+
+/**
+ @Function FM_PCD_FrmReplicAddMember
+
+ @Description Add the member in the index defined by the memberIndex.
+
+ @Param[in] h_FrmReplicGroup A handle to the frame replicator group.
+ @Param[in] memberIndex member index for adding.
+ @Param[in] p_MemberParams A pointer to the new member parameters.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_FrmReplicSetGroup() of this group.
+*/
+uint32_t FM_PCD_FrmReplicAddMember(t_Handle h_FrmReplicGroup,
+ uint16_t memberIndex,
+ ioc_fm_pcd_cc_next_engine_params_t *p_MemberParams);
+
+/**
+ @Function FM_PCD_FrmReplicRemoveMember
+
+ @Description Remove the member defined by the index from the relevant group.
+
+ @Param[in] h_FrmReplicGroup A handle to the frame replicator group.
+ @Param[in] memberIndex member index for removing.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PCD_FrmReplicSetGroup() of this group.
+*/
+uint32_t FM_PCD_FrmReplicRemoveMember(t_Handle h_FrmReplicGroup,
+ uint16_t memberIndex);
+#endif /* (DPAA_VERSION >= 11) */
+
+#if ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT))
+/**
+ @Function FM_PCD_StatisticsSetNode
+
+ @Description This routine should be called for defining a statistics node.
+
+ @Param[in] h_FmPcd FM PCD module descriptor.
+ @Param[in] p_FmPcdstatsParams A structure of parameters defining the statistics
+
+ @Return A handle to the initialized object on success; NULL code otherwise.
+
+ @Cautions Allowed only following FM_PCD_Init().
+*/
+t_Handle FM_PCD_StatisticsSetNode(t_Handle h_FmPcd,
+ ioc_fm_pcd_stats_params_t *p_FmPcdstatsParams);
+#endif /* ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) */
+
+/** @} */ /* end of FM_PCD_Runtime_build_grp group */
+/** @} */ /* end of FM_PCD_Runtime_grp group */
+/** @} */ /* end of FM_PCD_grp group */
+/** @} */ /* end of FM_grp group */
+
+#endif /* __FM_PCD_EXT_H */
new file mode 100644
@@ -0,0 +1,3512 @@
+/* SPDX-License-Identifier: (BSD-3-Clause OR GPL-2.0)
+ * Copyright 2008-2012 Freescale Semiconductor Inc.
+ * Copyright 2017-2020 NXP
+ */
+
+#ifndef __FM_PORT_EXT_H
+#define __FM_PORT_EXT_H
+
+#include <errno.h>
+#include "ncsw_ext.h"
+#include "fm_pcd_ext.h"
+#include "fm_ext.h"
+#include "net_ext.h"
+#include "dpaa_integration.h"
+
+/**
+ @Description FM Port routines
+*/
+
+/**
+
+ @Group lnx_ioctl_FM_grp Frame Manager Linux IOCTL API
+
+ @Description FM Linux ioctls definitions and enums
+
+ @{
+*/
+
+/**
+ @Group lnx_ioctl_FM_PORT_grp FM Port
+
+ @Description FM Port API
+
+ The FM uses a general module called "port" to represent a Tx port
+ (MAC), an Rx port (MAC), offline parsing flow or host command
+ flow. There may be up to 17 (may change) ports in an FM - 5 Tx
+ ports (4 for the 1G MACs, 1 for the 10G MAC), 5 Rx Ports, and 7
+ Host command/Offline parsing ports. The SW driver manages these
+ ports as sub-modules of the FM, i.e. after an FM is initialized,
+ its ports may be initialized and operated upon.
+
+ The port is initialized aware of its type, but other functions on
+ a port may be indifferent to its type. When necessary, the driver
+ verifies coherency and returns error if applicable.
+
+ On initialization, user specifies the port type and it's index
+ (relative to the port's type). Host command and Offline parsing
+ ports share the same id range, I.e user may not initialized host
+ command port 0 and offline parsing port 0.
+
+ @{
+*/
+
+/**
+ @Description An enum for defining port PCD modes.
+ (Must match enum e_FmPortPcdSupport defined in fm_port_ext.h)
+
+ This enum defines the superset of PCD engines support - i.e. not
+ all engines have to be used, but all have to be enabled. The real
+ flow of a specific frame depends on the PCD configuration and the
+ frame headers and payload.
+ Note: the first engine and the first engine after the parser (if
+ exists) should be in order, the order is important as it will
+ define the flow of the port. However, as for the rest engines
+ (the ones that follows), the order is not important anymore as
+ it is defined by the PCD graph itself.
+*/
+typedef enum ioc_fm_port_pcd_support {
+ e_IOC_FM_PORT_PCD_SUPPORT_NONE = 0 /**< BMI to BMI, PCD is not used */
+ , e_IOC_FM_PORT_PCD_SUPPORT_PRS_ONLY /**< Use only Parser */
+ , e_IOC_FM_PORT_PCD_SUPPORT_PLCR_ONLY /**< Use only Policer */
+ , e_IOC_FM_PORT_PCD_SUPPORT_PRS_AND_PLCR/**< Use Parser and Policer */
+ , e_IOC_FM_PORT_PCD_SUPPORT_PRS_AND_KG /**< Use Parser and Keygen */
+ , e_IOC_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_CC
+ /**< Use Parser, Keygen and Coarse Classification */
+ , e_IOC_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_CC_AND_PLCR
+ /**< Use all PCD engines */
+ , e_IOC_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_PLCR
+ /**< Use Parser, Keygen and Policer */
+ , e_IOC_FM_PORT_PCD_SUPPORT_PRS_AND_CC
+ /**< Use Parser and Coarse Classification */
+ , e_IOC_FM_PORT_PCD_SUPPORT_PRS_AND_CC_AND_PLCR
+ /**< Use Parser and Coarse Classification and Policer */
+ , e_IOC_FM_PORT_PCD_SUPPORT_CC_ONLY /**< Use only Coarse Classification */
+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
+ , e_IOC_FM_PORT_PCD_SUPPORT_CC_AND_KG
+ /**< Use Coarse Classification,and Keygen */
+ , e_IOC_FM_PORT_PCD_SUPPORT_CC_AND_KG_AND_PLCR
+ /**< Use Coarse Classification, Keygen and Policer */
+#endif /* FM_CAPWAP_SUPPORT */
+} ioc_fm_port_pcd_support;
+
+/**
+ @Collection FM Frame error
+*/
+typedef uint32_t ioc_fm_port_frame_err_select_t;
+ /**< typedef for defining Frame Descriptor errors */
+
+/* @} */
+
+/**
+ @Description An enum for defining Dual Tx rate limiting scale.
+ (Must match e_FmPortDualRateLimiterScaleDown defined in fm_port_ext.h)
+*/
+typedef enum ioc_fm_port_dual_rate_limiter_scale_down {
+ e_IOC_FM_PORT_DUAL_RATE_LIMITER_NONE = 0,
+ /**< Use only single rate limiter*/
+ e_IOC_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_2,
+ /**< Divide high rate limiter by 2 */
+ e_IOC_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_4,
+ /**< Divide high rate limiter by 4 */
+ e_IOC_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_8
+ /**< Divide high rate limiter by 8 */
+} ioc_fm_port_dual_rate_limiter_scale_down;
+
+/**
+ @Description A structure for defining Tx rate limiting
+ (Must match struct t_FmPortRateLimit defined in fm_port_ext.h)
+*/
+typedef struct ioc_fm_port_rate_limit_t {
+ uint16_t max_burst_size;/**< in KBytes for Tx ports, in frames
+ for offline parsing ports. (note that
+ for early chips burst size is
+ rounded up to a multiply of 1000 frames).*/
+ uint32_t rate_limit;/**< in Kb/sec for Tx ports, in frame/sec for
+ offline parsing ports. Rate limit refers to
+ data rate (rather than line rate). */
+ ioc_fm_port_dual_rate_limiter_scale_down rate_limit_divider;
+ /**< For offline parsing ports only. Not-valid
+ for some earlier chip revisions */
+} ioc_fm_port_rate_limit_t;
+
+
+/**
+ @Group lnx_ioctl_FM_PORT_runtime_control_grp FM Port Runtime Control Unit
+
+ @Description FM Port Runtime control unit API functions, definitions and enums.
+
+ @{
+*/
+
+/**
+ @Description An enum for defining FM Port counters.
+ (Must match enum e_FmPortCounters defined in fm_port_ext.h)
+*/
+typedef enum ioc_fm_port_counters {
+ e_IOC_FM_PORT_COUNTERS_CYCLE, /**< BMI performance counter */
+ e_IOC_FM_PORT_COUNTERS_TASK_UTIL, /**< BMI performance counter */
+ e_IOC_FM_PORT_COUNTERS_QUEUE_UTIL, /**< BMI performance counter */
+ e_IOC_FM_PORT_COUNTERS_DMA_UTIL, /**< BMI performance counter */
+ e_IOC_FM_PORT_COUNTERS_FIFO_UTIL, /**< BMI performance counter */
+ e_IOC_FM_PORT_COUNTERS_RX_PAUSE_ACTIVATION,
+ /**< BMI Rx only performance counter */
+ e_IOC_FM_PORT_COUNTERS_FRAME, /**< BMI statistics counter */
+ e_IOC_FM_PORT_COUNTERS_DISCARD_FRAME, /**< BMI statistics counter */
+ e_IOC_FM_PORT_COUNTERS_DEALLOC_BUF,
+ /**< BMI deallocate buffer statistics counter */
+ e_IOC_FM_PORT_COUNTERS_RX_BAD_FRAME, /**< BMI Rx only statistics counter */
+ e_IOC_FM_PORT_COUNTERS_RX_LARGE_FRAME, /**< BMI Rx only statistics counter */
+ e_IOC_FM_PORT_COUNTERS_RX_FILTER_FRAME,
+ /**< BMI Rx & OP only statistics counter */
+ e_IOC_FM_PORT_COUNTERS_RX_LIST_DMA_ERR,
+ /**< BMI Rx, OP & HC only statistics counter */
+ e_IOC_FM_PORT_COUNTERS_RX_OUT_OF_BUFFERS_DISCARD,
+ /**< BMI Rx, OP & HC statistics counter */
+ e_IOC_FM_PORT_COUNTERS_PREPARE_TO_ENQUEUE_COUNTER,
+ /**< BMI Rx, OP & HC only statistics counter */
+ e_IOC_FM_PORT_COUNTERS_WRED_DISCARD,/**< BMI OP & HC only statistics counter */
+ e_IOC_FM_PORT_COUNTERS_LENGTH_ERR, /**< BMI non-Rx statistics counter */
+ e_IOC_FM_PORT_COUNTERS_UNSUPPRTED_FORMAT,/**< BMI non-Rx statistics counter */
+ e_IOC_FM_PORT_COUNTERS_DEQ_TOTAL,/**< QMI total QM dequeues counter */
+ e_IOC_FM_PORT_COUNTERS_ENQ_TOTAL,/**< QMI total QM enqueues counter */
+ e_IOC_FM_PORT_COUNTERS_DEQ_FROM_DEFAULT,/**< QMI counter */
+ e_IOC_FM_PORT_COUNTERS_DEQ_CONFIRM /**< QMI counter */
+} ioc_fm_port_counters;
+
+typedef struct ioc_fm_port_bmi_stats_t {
+ uint32_t cnt_cycle;
+ uint32_t cnt_task_util;
+ uint32_t cnt_queue_util;
+ uint32_t cnt_dma_util;
+ uint32_t cnt_fifo_util;
+ uint32_t cnt_rx_pause_activation;
+ uint32_t cnt_frame;
+ uint32_t cnt_discard_frame;
+ uint32_t cnt_dealloc_buf;
+ uint32_t cnt_rx_bad_frame;
+ uint32_t cnt_rx_large_frame;
+ uint32_t cnt_rx_filter_frame;
+ uint32_t cnt_rx_list_dma_err;
+ uint32_t cnt_rx_out_of_buffers_discard;
+ uint32_t cnt_wred_discard;
+ uint32_t cnt_length_err;
+ uint32_t cnt_unsupported_format;
+} ioc_fm_port_bmi_stats_t;
+
+/**
+ @Description Structure for Port id parameters.
+ (Description may be inaccurate;
+ must match struct t_FmPortCongestionGrps defined in fm_port_ext.h)
+
+ Fields commented 'IN' are passed by the port module to be used
+ by the FM module.
+ Fields commented 'OUT' will be filled by FM before returning to port.
+*/
+typedef struct ioc_fm_port_congestion_groups_t {
+ uint16_t num_of_congestion_grps_to_consider;
+ /**< The number of required congestion groups
+ to define the size of the following array */
+ uint8_t congestion_grps_to_consider[FM_PORT_NUM_OF_CONGESTION_GRPS];
+ /**< An array of CG indexes;
+ Note that the size of the array should be
+ 'num_of_congestion_grps_to_consider'. */
+#if DPAA_VERSION >= 11
+ bool pfc_priorities_enable[FM_PORT_NUM_OF_CONGESTION_GRPS][FM_MAX_NUM_OF_PFC_PRIORITIES];
+ /**< A matrix that represents the map between the CG ids
+ defined in 'congestion_grps_to_consider' to the priorities
+ mapping array. */
+#endif /* DPAA_VERSION >= 11 */
+} ioc_fm_port_congestion_groups_t;
+
+
+/**
+ @Function FM_PORT_Disable
+
+ @Description Gracefully disable an FM port. The port will not start new
+ tasks after all tasks associated with the port are terminated.
+
+ @Return 0 on success; error code otherwise.
+
+ @Cautions This is a blocking routine, it returns after port is
+ gracefully stopped, i.e. the port will not except new frames,
+ but it will finish all frames or tasks which were already began
+*/
+#define FM_PORT_IOC_DISABLE _IO(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(1))
+
+/**
+ @Function FM_PORT_Enable
+
+ @Description A runtime routine provided to allow disable/enable of port.
+
+ @Return 0 on success; error code otherwise.
+*/
+#define FM_PORT_IOC_ENABLE _IO(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(2))
+
+/**
+ @Function FM_PORT_SetRateLimit
+
+ @Description Calling this routine enables rate limit algorithm.
+ By default, this functionality is disabled.
+
+ Note that rate - limit mechanism uses the FM time stamp.
+ The selected rate limit specified here would be
+ rounded DOWN to the nearest 16M.
+
+ May be used for Tx and offline parsing ports only
+
+ @Param[in] ioc_fm_port_rate_limit A structure of rate limit parameters
+
+ @Return 0 on success; error code otherwise.
+*/
+#define FM_PORT_IOC_SET_RATE_LIMIT \
+ IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(3), ioc_fm_port_rate_limit_t)
+
+/**
+ @Function FM_PORT_DeleteRateLimit
+
+ @Description Calling this routine disables the previously enabled rate limit.
+
+ May be used for Tx and offline parsing ports only
+
+ @Return 0 on success; error code otherwise.
+*/
+#define FM_PORT_IOC_DELETE_RATE_LIMIT _IO(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(5))
+#define FM_PORT_IOC_REMOVE_RATE_LIMIT FM_PORT_IOC_DELETE_RATE_LIMIT
+
+/**
+ @Function FM_PORT_AddCongestionGrps
+
+ @Description This routine effects the corresponding Tx port.
+ It should be called in order to enable pause
+ frame transmission in case of congestion in one or more
+ of the congestion groups relevant to this port.
+ Each call to this routine may add one or more congestion
+ groups to be considered relevant to this port.
+
+ May be used for Rx, or RX+OP ports only (depending on chip)
+
+ @Param[in] ioc_fm_port_congestion_groups_t - A pointer to an array of
+ congestion group ids to consider.
+
+ @Return 0 on success; error code otherwise.
+*/
+#define FM_PORT_IOC_ADD_CONGESTION_GRPS \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(34), ioc_fm_port_congestion_groups_t)
+
+/**
+ @Function FM_PORT_RemoveCongestionGrps
+
+ @Description This routine effects the corresponding Tx port. It should be
+ called when congestion groups were
+ defined for this port and are no longer relevant, or pause
+ frames transmitting is not required on their behalf.
+ Each call to this routine may remove one or more congestion
+ groups to be considered relevant to this port.
+
+ May be used for Rx, or RX+OP ports only (depending on chip)
+
+ @Param[in] ioc_fm_port_congestion_groups_t - A pointer to an array of
+ congestion group ids to consider.
+
+ @Return 0 on success; error code otherwise.
+*/
+#define FM_PORT_IOC_REMOVE_CONGESTION_GRPS \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(35), ioc_fm_port_congestion_groups_t)
+
+/**
+ @Function FM_PORT_SetErrorsRoute
+
+ @Description Errors selected for this routine will cause a frame with that error
+ to be enqueued to error queue.
+ Errors not selected for this routine will cause a frame with that error
+ to be enqueued to the one of the other port queues.
+ By default all errors are defined to be enqueued to error queue.
+ Errors that were configured to be discarded (at initialization)
+ may not be selected here.
+
+ May be used for Rx and offline parsing ports only
+
+ @Param[in] ioc_fm_port_frame_err_select_t A list of errors to enqueue to error queue
+
+ @Return 0 on success; error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+ (szbs001: How is it possible to have one function that needs to be
+ called BEFORE FM_PORT_Init() implemented as an ioctl,
+ which will ALWAYS be called AFTER the FM_PORT_Init()
+ for that port!?!?!?!???!?!??!?!?)
+*/
+#define FM_PORT_IOC_SET_ERRORS_ROUTE \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(4), ioc_fm_port_frame_err_select_t)
+
+/**
+ @Group lnx_ioctl_FM_PORT_pcd_runtime_control_grp FM Port PCD Runtime Control Unit
+
+ @Description FM Port PCD Runtime control unit API functions, definitions and enums.
+
+ @{
+*/
+
+/**
+ @Description A structure defining the KG scheme after the parser.
+ (Must match struct ioc_fm_pcd_kg_scheme_select_t defined in fm_port_ext.h)
+
+ This is relevant only to change scheme selection mode - from
+ direct to indirect and vice versa, or when the scheme is selected directly,
+ to select the scheme id.
+
+*/
+typedef struct ioc_fm_pcd_kg_scheme_select_t {
+ bool direct; /**< TRUE to use 'scheme_id' directly, FALSE to use LCV.*/
+ void *scheme_id;/**< Relevant for 'direct'=TRUE only.
+ 'scheme_id' selects the scheme after parser. */
+} ioc_fm_pcd_kg_scheme_select_t;
+
+/**
+ @Description Scheme IDs structure
+ (Must match struct ioc_fm_pcd_port_schemes_params_t defined in fm_port_ext.h)
+*/
+typedef struct ioc_fm_pcd_port_schemes_params_t {
+ uint8_t num_of_schemes; /**< Number of schemes for port to be bound to. */
+ void *scheme_ids[FM_PCD_KG_NUM_OF_SCHEMES];
+ /**< Array of 'num_of_schemes' schemes for the port to be bound to */
+} ioc_fm_pcd_port_schemes_params_t;
+
+/**
+ @Description A union for defining port protocol parameters for parser
+ (Must match union u_FmPcdHdrPrsOpts defined in fm_port_ext.h)
+*/
+typedef union ioc_fm_pcd_hdr_prs_opts_u {
+ /* MPLS */
+ struct {
+ bool label_interpretation_enable;
+ /**< When this bit is set, the last MPLS label will be
+ interpreted as described in HW spec table. When the bit
+ is cleared, the parser will advance to MPLS next parse */
+ ioc_net_header_type next_parse;/**< must be equal or higher than IPv4 */
+ } mpls_prs_options;
+
+ /* VLAN */
+ struct {
+ uint16_t tag_protocol_id1;
+ /**< User defined Tag Protocol Identifier, to be recognized
+ on VLAN TAG on top of 0x8100 and 0x88A8 */
+ uint16_t tag_protocol_id2;
+ /**< User defined Tag Protocol Identifier, to be recognized
+ on VLAN TAG on top of 0x8100 and 0x88A8 */
+ } vlan_prs_options;
+
+ /* PPP */
+ struct{
+ bool enable_mtu_check;
+ /**< Check validity of MTU according to RFC2516 */
+ } pppoe_prs_options;
+
+ /* IPV6 */
+ struct {
+ bool routing_hdr_disable;
+ /**< Disable routing header */
+ } ipv6_prs_options;
+
+ /* UDP */
+ struct {
+ bool pad_ignore_checksum;
+ /**< TRUE to ignore pad in checksum */
+ } udp_prs_options;
+
+ /* TCP */
+ struct {
+ bool pad_ignore_checksum;
+ /**< TRUE to ignore pad in checksum */
+ } tcp_prs_options;
+} ioc_fm_pcd_hdr_prs_opts_u;
+
+/**
+ @Description A structure for defining each header for the parser
+ (must match struct t_FmPcdPrsAdditionalHdrParams defined in fm_port_ext.h)
+*/
+typedef struct ioc_fm_pcd_prs_additional_hdr_params_t {
+ ioc_net_header_type hdr; /**< Selected header */
+ bool err_disable; /**< TRUE to disable error indication */
+ bool soft_prs_enable;/**< Enable jump to SW parser when this
+ header is recognized by the HW parser. */
+ uint8_t index_per_hdr; /**< Normally 0, if more than one sw parser
+ attachments exists for the same header,
+ (in the main sw parser code) use this
+ index to distinguish between them. */
+ bool use_prs_opts; /**< TRUE to use parser options. */
+ ioc_fm_pcd_hdr_prs_opts_u prs_opts;/**< A unuion according to header type,
+ defining the parser options selected.*/
+} ioc_fm_pcd_prs_additional_hdr_params_t;
+
+/**
+ @Description A structure for defining port PCD parameters
+ (Must match t_FmPortPcdPrsParams defined in fm_port_ext.h)
+*/
+typedef struct ioc_fm_port_pcd_prs_params_t {
+ uint8_t prs_res_priv_info;
+ /**< The private info provides a method of inserting
+ port information into the parser result. This information
+ may be extracted by KeyGen and be used for frames
+ distribution when a per-port distinction is required,
+ it may also be used as a port logical id for analyzing
+ incoming frames. */
+ uint8_t parsing_offset;
+ /**< Number of bytes from begining of packet to start parsing */
+ ioc_net_header_type first_prs_hdr;
+ /**< The type of the first header axpected at 'parsing_offset' */
+ bool include_in_prs_statistics;
+ /**< TRUE to include this port in the parser statistics */
+ uint8_t num_of_hdrs_with_additional_params;
+ /**< Normally 0, some headers may get special parameters */
+ ioc_fm_pcd_prs_additional_hdr_params_t additional_params[IOC_FM_PCD_PRS_NUM_OF_HDRS];
+ /**< 'num_of_hdrs_with_additional_params' structures
+ additional parameters for each header that requires them */
+ bool set_vlan_tpid1;
+ /**< TRUE to configure user selection of Ethertype to
+ indicate a VLAN tag (in addition to the TPID values
+ 0x8100 and 0x88A8). */
+ uint16_t vlan_tpid1;
+ /**< extra tag to use if set_vlan_tpid1=TRUE. */
+ bool set_vlan_tpid2;
+ /**< TRUE to configure user selection of Ethertype to
+ indicate a VLAN tag (in addition to the TPID values
+ 0x8100 and 0x88A8). */
+ uint16_t vlan_tpid2; /**< extra tag to use if set_vlan_tpid1=TRUE. */
+} ioc_fm_port_pcd_prs_params_t;
+
+/**
+ @Description A structure for defining coarse alassification parameters
+ (Must match t_FmPortPcdCcParams defined in fm_port_ext.h)
+*/
+typedef struct ioc_fm_port_pcd_cc_params_t {
+ void *cc_tree_id; /**< CC tree id */
+} ioc_fm_port_pcd_cc_params_t;
+
+/**
+ @Description A structure for defining keygen parameters
+ (Must match t_FmPortPcdKgParams defined in fm_port_ext.h)
+*/
+typedef struct ioc_fm_port_pcd_kg_params_t {
+ uint8_t num_of_schemes;
+ /**< Number of schemes for port to be bound to. */
+ void *scheme_ids[FM_PCD_KG_NUM_OF_SCHEMES];
+ /**< Array of 'num_of_schemes' schemes for the
+ port to be bound to */
+ bool direct_scheme;
+ /**< TRUE for going from parser to a specific scheme,
+ regardless of parser result */
+ void *direct_scheme_id;
+ /**< Scheme id, as returned by FM_PCD_KgSetScheme;
+ relevant only if direct=TRUE. */
+} ioc_fm_port_pcd_kg_params_t;
+
+/**
+ @Description A structure for defining policer parameters
+ (Must match t_FmPortPcdPlcrParams defined in fm_port_ext.h)
+*/
+typedef struct ioc_fm_port_pcd_plcr_params_t {
+ void *plcr_profile_id;/**< Selected profile handle;
+ relevant in one of the following cases:
+ e_IOC_FM_PORT_PCD_SUPPORT_PLCR_ONLY or
+ e_IOC_FM_PORT_PCD_SUPPORT_PRS_AND_PLCR were selected,
+ or if any flow uses a KG scheme where policer
+ profile is not generated (bypass_plcr_profile_generation selected) */
+} ioc_fm_port_pcd_plcr_params_t;
+
+/**
+ @Description A structure for defining port PCD parameters
+ (Must match struct t_FmPortPcdParams defined in fm_port_ext.h)
+*/
+typedef struct ioc_fm_port_pcd_params_t {
+ ioc_fm_port_pcd_support pcd_support;
+ /**< Relevant for Rx and offline ports only.
+ Describes the active PCD engines for this port. */
+ void *net_env_id; /**< HL Unused in PLCR only mode */
+ ioc_fm_port_pcd_prs_params_t *p_prs_params;
+ /**< Parser parameters for this port */
+ ioc_fm_port_pcd_cc_params_t *p_cc_params;
+ /**< Coarse classification parameters for this port */
+ ioc_fm_port_pcd_kg_params_t *p_kg_params;
+ /**< Keygen parameters for this port */
+ ioc_fm_port_pcd_plcr_params_t *p_plcr_params;
+ /**< Policer parameters for this port */
+ void *p_ip_reassembly_manip;/**< IP Reassembly manipulation */
+#if (DPAA_VERSION >= 11)
+ void *p_capwap_reassembly_manip;
+ /**< CAPWAP Reassembly manipulation */
+#endif /* (DPAA_VERSION >= 11) */
+} ioc_fm_port_pcd_params_t;
+
+/**
+ @Description A structure for defining the Parser starting point
+ (Must match struct ioc_fm_pcd_prs_start_t defined in fm_port_ext.h)
+*/
+typedef struct ioc_fm_pcd_prs_start_t {
+ uint8_t parsing_offset; /**< Number of bytes from begining of packet to
+ start parsing */
+ ioc_net_header_type first_prs_hdr;/**< The type of the first header axpected at
+ 'parsing_offset' */
+} ioc_fm_pcd_prs_start_t;
+
+/**
+ @Description FQID parameters structure
+*/
+typedef struct ioc_fm_port_pcd_fqids_params_t {
+ uint32_t num_fqids; /**< Number of fqids to be allocated for the port */
+ uint8_t alignment; /**< Alignment required for this port */
+ uint32_t base_fqid; /**< output parameter - the base fqid */
+} ioc_fm_port_pcd_fqids_params_t;
+
+/**
+ @Function FM_PORT_IOC_ALLOC_PCD_FQIDS
+
+ @Description Allocates FQID's
+
+ May be used for Rx and offline parsing ports only
+
+ @Param[in,out] ioc_fm_port_pcd_fqids_params_t Parameters for allocating FQID's
+
+ @Return 0 on success; error code otherwise.
+*/
+#define FM_PORT_IOC_ALLOC_PCD_FQIDS \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(19), ioc_fm_port_pcd_fqids_params_t)
+
+/**
+ @Function FM_PORT_IOC_FREE_PCD_FQIDS
+
+ @Description Frees previously-allocated FQIDs
+
+ May be used for Rx and offline parsing ports only
+
+ @Param[in] uint32_t Base FQID of previously allocated range.
+
+ @Return 0 on success; error code otherwise.
+*/
+#define FM_PORT_IOC_FREE_PCD_FQIDS \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(19), uint32_t)
+
+/**
+ @Function FM_PORT_SetPCD
+
+ @Description Calling this routine defines the port's PCD configuration.
+ It changes it from its default configuration which is PCD
+ disabled (BMI to BMI) and configures it according to the passed
+ parameters.
+
+ May be used for Rx and offline parsing ports only
+
+ @Param[in] ioc_fm_port_pcd_params_t
+ A Structure of parameters defining the port's PCD configuration.
+
+ @Return 0 on success; error code otherwise.
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PORT_IOC_SET_PCD_COMPAT \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(20), ioc_compat_fm_port_pcd_params_t)
+#endif
+#define FM_PORT_IOC_SET_PCD \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(20), ioc_fm_port_pcd_params_t)
+
+/**
+ @Function FM_PORT_DeletePCD
+
+ @Description Calling this routine releases the port's PCD configuration.
+ The port returns to its default configuration which is PCD
+ disabled (BMI to BMI) and all PCD configuration is removed.
+
+ May be used for Rx and offline parsing ports which are
+ in PCD mode only
+
+ @Return 0 on success; error code otherwise.
+*/
+#define FM_PORT_IOC_DELETE_PCD _IO(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(21))
+
+/**
+ @Function FM_PORT_AttachPCD
+
+ @Description This routine may be called after FM_PORT_DetachPCD was called,
+ to return to the originally configured PCD support flow.
+ The couple of routines are used to allow PCD configuration changes
+ that demand that PCD will not be used while changes take place.
+
+ May be used for Rx and offline parsing ports which are
+ in PCD mode only
+
+ @Return 0 on success; error code otherwise.
+*/
+#define FM_PORT_IOC_ATTACH_PCD _IO(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(23))
+
+/**
+ @Function FM_PORT_DetachPCD
+
+ @Description Calling this routine detaches the port from its PCD functionality.
+ The port returns to its default flow which is BMI to BMI.
+
+ May be used for Rx and offline parsing ports which are
+ in PCD mode only
+
+ @Return 0 on success; error code otherwise.
+*/
+#define FM_PORT_IOC_DETACH_PCD _IO(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(22))
+
+/**
+ @Function FM_PORT_PcdPlcrAllocProfiles
+
+ @Description This routine may be called only for ports that use the Policer in
+ order to allocate private policer profiles.
+
+ @Param[in] uint16_t The number of required policer profiles
+
+ @Return 0 on success; error code otherwise.
+
+ @Cautions Allowed before FM_PORT_SetPCD() only.
+*/
+#define FM_PORT_IOC_PCD_PLCR_ALLOC_PROFILES \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(24), uint16_t)
+
+/**
+ @Function FM_PORT_PcdPlcrFreeProfiles
+
+ @Description This routine should be called for freeing private policer profiles.
+
+ @Return 0 on success; error code otherwise.
+
+ @Cautions Allowed before FM_PORT_SetPCD() only.
+*/
+#define FM_PORT_IOC_PCD_PLCR_FREE_PROFILES \
+ _IO(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(25))
+
+/**
+ @Function FM_PORT_PcdKgModifyInitialScheme
+
+ @Description This routine may be called only for ports that use the keygen in
+ order to change the initial scheme frame should be routed to.
+ The change may be of a scheme id (in case of direct mode),
+ from direct to indirect, or from indirect to direct - specifying the scheme id.
+
+ @Param[in] ioc_fm_pcd_kg_scheme_select_t
+ A structure of parameters for defining whether
+ a scheme is direct/indirect, and if direct - scheme id.
+
+ @Return 0 on success; error code otherwise.
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PORT_IOC_PCD_KG_MODIFY_INITIAL_SCHEME_COMPAT \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(26), ioc_compat_fm_pcd_kg_scheme_select_t)
+#endif
+#define FM_PORT_IOC_PCD_KG_MODIFY_INITIAL_SCHEME \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(26), ioc_fm_pcd_kg_scheme_select_t)
+
+/**
+ @Function FM_PORT_PcdPlcrModifyInitialProfile
+
+ @Description This routine may be called for ports with flows
+ e_IOC_FM_PCD_SUPPORT_PLCR_ONLY or e_IOC_FM_PCD_SUPPORT_PRS_AND_PLCR
+ only, to change the initial Policer profile frame should be routed to.
+ The change may be of a profile and / or absolute / direct mode selection.
+
+ @Param[in] ioc_fm_obj_t Policer profile Id as returned from FM_PCD_PlcrSetProfile.
+
+ @Return 0 on success; error code otherwise.
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PORT_IOC_PCD_PLCR_MODIFY_INITIAL_PROFILE_COMPAT \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(27), ioc_compat_fm_obj_t)
+#endif
+#define FM_PORT_IOC_PCD_PLCR_MODIFY_INITIAL_PROFILE \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(27), ioc_fm_obj_t)
+
+/**
+ @Function FM_PORT_PcdCcModifyTree
+
+ @Description This routine may be called to change this port connection to
+ a pre - initializes coarse classification Tree.
+
+ @Param[in] ioc_fm_obj_t Id of new coarse classification tree selected for this port.
+
+ @Return 0 on success; error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_SetPCD() and FM_PORT_DetachPCD()
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PORT_IOC_PCD_CC_MODIFY_TREE_COMPAT \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(28), ioc_compat_fm_obj_t)
+#endif
+#define FM_PORT_IOC_PCD_CC_MODIFY_TREE \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(28), ioc_fm_obj_t)
+
+/**
+ @Function FM_PORT_PcdKgBindSchemes
+
+ @Description These routines may be called for modifying the binding of ports
+ to schemes. The scheme itself is not added,
+ just this specific port starts using it.
+
+ @Param[in] ioc_fm_pcd_port_schemes_params_t Schemes parameters structre
+
+ @Return 0 on success; error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_SetPCD().
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PORT_IOC_PCD_KG_BIND_SCHEMES_COMPAT \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(30), ioc_compat_fm_pcd_port_schemes_params_t)
+#endif
+#define FM_PORT_IOC_PCD_KG_BIND_SCHEMES \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(30), ioc_fm_pcd_port_schemes_params_t)
+
+/**
+ @Function FM_PORT_PcdKgUnbindSchemes
+
+ @Description These routines may be called for modifying the binding of ports
+ to schemes. The scheme itself is not removed or invalidated,
+ just this specific port stops using it.
+
+ @Param[in] ioc_fm_pcd_port_schemes_params_t Schemes parameters structre
+
+ @Return 0 on success; error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_SetPCD().
+*/
+#if defined(CONFIG_COMPAT)
+#define FM_PORT_IOC_PCD_KG_UNBIND_SCHEMES_COMPAT \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(31), ioc_compat_fm_pcd_port_schemes_params_t)
+#endif
+#define FM_PORT_IOC_PCD_KG_UNBIND_SCHEMES \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(31), ioc_fm_pcd_port_schemes_params_t)
+
+#define ENET_NUM_OCTETS_PER_ADDRESS 6
+ /**< Number of octets (8-bit bytes) in an ethernet address */
+typedef struct ioc_fm_port_mac_addr_params_t {
+ uint8_t addr[ENET_NUM_OCTETS_PER_ADDRESS];
+} ioc_fm_port_mac_addr_params_t;
+
+/**
+ @Function FM_MAC_AddHashMacAddr
+
+ @Description Add an Address to the hash table. This is for filter purpose only.
+
+ @Param[in] ioc_fm_port_mac_addr_params_t - Ethernet Mac address
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_MAC_Init(). It is a filter only address.
+ @Cautions Some address need to be filtered out in upper FM blocks.
+*/
+#define FM_PORT_IOC_ADD_RX_HASH_MAC_ADDR \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(36), ioc_fm_port_mac_addr_params_t)
+
+/**
+ @Function FM_MAC_RemoveHashMacAddr
+
+ @Description Delete an Address to the hash table. This is for filter purpose only.
+
+ @Param[in] ioc_fm_port_mac_addr_params_t - Ethernet Mac address
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_MAC_Init().
+*/
+#define FM_PORT_IOC_REMOVE_RX_HASH_MAC_ADDR \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(37), ioc_fm_port_mac_addr_params_t)
+
+typedef struct ioc_fm_port_tx_pause_frames_params_t {
+ uint8_t priority;
+ uint16_t pause_time;
+ uint16_t thresh_time;
+} ioc_fm_port_tx_pause_frames_params_t;
+
+/**
+ @Function FM_MAC_SetTxPauseFrames
+
+ @Description Enable/Disable transmission of Pause-Frames.
+ The routine changes the default configuration:
+ pause-time - [0xf000]
+ threshold-time - [0]
+
+ @Param[in] ioc_fm_port_tx_pause_frames_params_t
+ A structure holding the required parameters.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_MAC_Init().
+ PFC is supported only on new mEMAC; i.e. in MACs that don't have
+ PFC support (10G-MAC and dTSEC), user should use 'FM_MAC_NO_PFC'
+ in the 'priority' field.
+*/
+#define FM_PORT_IOC_SET_TX_PAUSE_FRAMES \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(40), ioc_fm_port_tx_pause_frames_params_t)
+
+typedef struct ioc_fm_port_mac_statistics_t {
+ /* RMON */
+ uint64_t e_stat_pkts_64; /**< r-10G tr-DT 64 byte frame counter */
+ uint64_t e_stat_pkts_65_to_127;/**< r-10G 65 to 127 byte frame counter */
+ uint64_t e_stat_pkts_128_to_255;/**< r-10G 128 to 255 byte frame counter */
+ uint64_t e_stat_pkts_256_to_511;/**< r-10G 256 to 511 byte frame counter */
+ uint64_t e_stat_pkts_512_to_1023;/**< r-10G 512 to 1023 byte frame counter*/
+ uint64_t e_stat_pkts_1024_to_1518;
+ /**< r-10G 1024 to 1518 byte frame counter */
+ uint64_t e_stat_pkts_1519_to_1522;
+ /**< r-10G 1519 to 1522 byte good frame count */
+ /* */
+ uint64_t e_stat_fragments;
+ /**< Total number of packets that were less than 64 octets long with a wrong CRC.*/
+ uint64_t e_stat_jabbers;
+ /**< Total number of packets longer than valid maximum length octets */
+ uint64_t e_stat_drop_events;
+ /**< number of dropped packets due to internal errors of the MAC Client
+ (during recieve). */
+ uint64_t e_stat_CRC_align_errors;
+ /**< Incremented when frames of correct length but with CRC error are received.*/
+ uint64_t e_stat_undersize_pkts;
+ /**< Incremented for frames under 64 bytes with a valid FCS and otherwise
+ well formed; This count does not include range length errors */
+ uint64_t e_stat_oversize_pkts;
+ /**< Incremented for frames which exceed 1518 (non VLAN) or 1522 (VLAN)
+ and contains a valid FCS and otherwise well formed */
+ /* Pause */
+ uint64_t te_stat_pause; /**< Pause MAC Control received */
+ uint64_t re_stat_pause; /**< Pause MAC Control sent */
+ /* MIB II */
+ uint64_t if_in_octets; /**< Total number of byte received. */
+ uint64_t if_in_pkts; /**< Total number of packets received.*/
+ uint64_t if_in_ucast_pkts; /**< Total number of unicast frame received;
+ NOTE: this counter is not supported on dTSEC MAC */
+ uint64_t if_in_mcast_pkts;/**< Total number of multicast frame received*/
+ uint64_t if_in_bcast_pkts;/**< Total number of broadcast frame received */
+ uint64_t if_in_discards;
+ /**< Frames received, but discarded due to problems within the MAC RX. */
+ uint64_t if_in_errors; /**< Number of frames received with error:
+ - FIFO Overflow Error
+ - CRC Error
+ - Frame Too Long Error
+ - Alignment Error
+ - The dedicated Error Code (0xfe, not a code error) was received */
+ uint64_t if_out_octets; /**< Total number of byte sent. */
+ uint64_t if_out_pkts; /**< Total number of packets sent .*/
+ uint64_t if_out_ucast_pkts; /**< Total number of unicast frame sent;
+ NOTE: this counter is not supported on dTSEC MAC */
+ uint64_t if_out_mcast_pkts; /**< Total number of multicast frame sent */
+ uint64_t if_out_bcast_pkts; /**< Total number of multicast frame sent */
+ uint64_t if_out_discards;
+ /**< Frames received, but discarded due to problems within the MAC TX N/A!.*/
+ uint64_t if_out_errors; /**< Number of frames transmitted with error:
+ - FIFO Overflow Error
+ - FIFO Underflow Error
+ - Other */
+} ioc_fm_port_mac_statistics_t;
+
+/**
+ @Function FM_MAC_GetStatistics
+
+ @Description get all MAC statistics counters
+
+ @Param[out] ioc_fm_port_mac_statistics_t A structure holding the statistics
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_Init().
+*/
+#define FM_PORT_IOC_GET_MAC_STATISTICS \
+ _IOR(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(41), ioc_fm_port_mac_statistics_t)
+
+/**
+ @Function FM_PORT_GetBmiCounters
+
+ @Description Read port's BMI stat counters and place them into
+ a designated structure of counters.
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[out] p_BmiStats counters structure
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init().
+*/
+
+#define FM_PORT_IOC_GET_BMI_COUNTERS \
+ _IOR(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(42), ioc_fm_port_bmi_stats_t)
+
+/** @} */ /* end of lnx_ioctl_FM_PORT_pcd_runtime_control_grp group */
+/** @} */ /* end of lnx_ioctl_FM_PORT_runtime_control_grp group */
+
+/** @} */ /* end of lnx_ioctl_FM_PORT_grp group */
+/** @} */ /* end of lnx_ioctl_FM_grp group */
+
+
+/**
+ @Group gen_id General Drivers Utilities
+
+ @Description External routines.
+
+ @{
+*/
+
+/**
+ @Group gen_error_id Errors, Events and Debug
+
+ @Description External routines.
+
+ @{
+*/
+
+/**
+The scheme below provides the bits description for error codes:
+
+ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
+| Reserved (should be zero) | Module ID |
+
+ 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+| Error Type |
+*/
+
+#define ERROR_CODE(_err) ((((uint32_t)_err) & 0x0000FFFF) | __ERR_MODULE__)
+
+#define GET_ERROR_TYPE(_errcode) ((_errcode) & 0x0000FFFF)
+ /**< Extract module code from error code (#uint32_t) */
+
+#define GET_ERROR_MODULE(_errcode) ((_errcode) & 0x00FF0000)
+ /**< Extract error type (#e_ErrorType) from
+ error code (#uint32_t) */
+
+#define RETURN_ERROR(_level, _err, _vmsg) { \
+ return ERROR_CODE(_err); \
+}
+
+/**
+ @Description Error Type Enumeration
+*/
+typedef enum e_ErrorType {
+ E_OK = 0 /* Never use "RETURN_ERROR" with E_OK; Use "return E_OK;"*/
+ , E_WRITE_FAILED = EIO /**< Write access failed on memory/device.*/
+ /* String: none, or device name.*/
+ , E_NO_DEVICE = ENXIO /**< The associated device is not initialized.*/
+ /* String: none.*/
+ , E_NOT_AVAILABLE = EAGAIN
+ /**< Resource is unavailable.*/
+ /* String: none, unless the operation is not the main goal
+ of the function (in this case add resource description). */
+ , E_NO_MEMORY = ENOMEM /**< External memory allocation failed.*/
+ /* String: description of item for which allocation failed. */
+ , E_INVALID_ADDRESS = EFAULT
+ /**< Invalid address.*/
+ /* String: description of the specific violation.*/
+ , E_BUSY = EBUSY /**< Resource or module is busy.*/
+ /* String: none, unless the operation is not the main goal
+ of the function (in this case add resource description). */
+ , E_ALREADY_EXISTS = EEXIST
+ /**< Requested resource or item already exists.*/
+ /* Use when resource duplication or sharing are not allowed.
+ String: none, unless the operation is not the main goal
+ of the function (in this case add item description).*/
+ , E_INVALID_OPERATION = ENODEV
+ /**< The operation/command is invalid (unrecognized).*/
+ /* String: none.*/
+ , E_INVALID_VALUE = EDOM /**< Invalid value.*/
+ /* Use for non-enumeration parameters, and
+ only when other error types are not suitable.
+ String: parameter description + "(should be <attribute>)",
+ e.g: "Maximum Rx buffer length (should be divisible by 8)",
+ "Channel number (should be even)".*/
+ , E_NOT_IN_RANGE = ERANGE/**< Parameter value is out of range.*/
+ /* Don't use this error for enumeration parameters.
+ String: parameter description + "(should be %d-%d)",
+ e.g: "Number of pad characters (should be 0-15)".*/
+ , E_NOT_SUPPORTED = ENOSYS
+ /**< The function is not supported or not implemented.*/
+ /* String: none.*/
+ , E_INVALID_STATE /**< The operation is not allowed in current module state.*/
+ /* String: none.*/
+ , E_INVALID_HANDLE /**< Invalid handle of module or object.*/
+ /* String: none, unless the function takes in more than one
+ handle (in this case add the handle description)*/
+ , E_INVALID_ID /**< Invalid module ID (usually enumeration or index).*/
+ /* String: none, unless the function takes in more than one
+ ID (in this case add the ID description)*/
+ , E_NULL_POINTER /**< Unexpected NULL pointer.*/
+ /* String: pointer description.*/
+ , E_INVALID_SELECTION /**< Invalid selection or mode.*/
+ /* Use for enumeration values, only when other error types
+ are not suitable.
+ String: parameter description.*/
+ , E_INVALID_COMM_MODE /**< Invalid communication mode.*/
+ /* String: none, unless the function takes in more than one
+ communication mode indications (in this case add
+ parameter description).*/
+ , E_INVALID_MEMORY_TYPE /**< Invalid memory type.*/
+ /* String: none, unless the function takes in more than one
+ memory types (in this case add memory description,
+ e.g: "Data memory", "Buffer descriptors memory").*/
+ , E_INVALID_CLOCK /**< Invalid clock.*/
+ /* String: none, unless the function takes in more than one
+ clocks (in this case add clock description,
+ e.g: "Rx clock", "Tx clock").*/
+ , E_CONFLICT /**< Some setting conflicts with another setting.*/
+ /* String: description of the conflicting settings.*/
+ , E_NOT_ALIGNED /**< Non-aligned address.*/
+ /* String: parameter description + "(should be %d-bytes aligned)",
+ e.g: "Rx data buffer (should be 32-bytes aligned)".*/
+ , E_NOT_FOUND /**< Requested resource or item was not found.*/
+ /* Use only when the resource/item is uniquely identified.
+ String: none, unless the operation is not the main goal
+ of the function (in this case add item description).*/
+ , E_FULL /**< Resource is full.*/
+ /* String: none, unless the operation is not the main goal
+ of the function (in this case add resource description). */
+ , E_EMPTY /**< Resource is empty.*/
+ /* String: none, unless the operation is not the main goal
+ of the function (in this case add resource description). */
+ , E_ALREADY_FREE /**< Specified resource or item is already free or deleted.*/
+ /* String: none, unless the operation is not the main goal
+ of the function (in this case add item description).*/
+ , E_READ_FAILED /**< Read access failed on memory/device.*/
+ /* String: none, or device name.*/
+ , E_INVALID_FRAME /**< Invalid frame object (NULL handle or missing buffers).*/
+ /* String: none.*/
+ , E_SEND_FAILED /**< Send operation failed on device.*/
+ /* String: none, or device name.*/
+ , E_RECEIVE_FAILED /**< Receive operation failed on device.*/
+ /* String: none, or device name.*/
+ , E_TIMEOUT/* = ETIMEDOUT*/ /**< The operation timed out.*/
+ /* String: none.*/
+
+ , E_DUMMY_LAST /* NEVER USED */
+
+} e_ErrorType;
+
+/**
+
+ @Group FM_grp Frame Manager API
+
+ @Description FM API functions, definitions and enums
+
+ @{
+*/
+
+/**
+ @Group FM_PORT_grp FM Port
+
+ @Description FM Port API
+
+ The FM uses a general module called "port" to represent a Tx port
+ (MAC), an Rx port (MAC) or Offline Parsing port.
+ The number of ports in an FM varies between SOCs.
+ The SW driver manages these ports as sub-modules of the FM, i.e.
+ after an FM is initialized, its ports may be initialized and
+ operated upon.
+
+ The port is initialized aware of its type, but other functions on
+ a port may be indifferent to its type. When necessary, the driver
+ verifies coherence and returns error if applicable.
+
+ On initialization, user specifies the port type and it's index
+ (relative to the port's type) - always starting at 0.
+
+ @{
+*/
+
+/**
+ @Description An enum for defining port PCD modes.
+ This enum defines the superset of PCD engines support - i.e. not
+ all engines have to be used, but all have to be enabled. The real
+ flow of a specific frame depends on the PCD configuration and the
+ frame headers and payload.
+ Note: the first engine and the first engine after the parser (if
+ exists) should be in order, the order is important as it will
+ define the flow of the port. However, as for the rest engines
+ (the ones that follows), the order is not important anymore as
+ it is defined by the PCD graph itself.
+*/
+typedef enum e_FmPortPcdSupport {
+ e_FM_PORT_PCD_SUPPORT_NONE = 0 /**< BMI to BMI, PCD is not used */
+ , e_FM_PORT_PCD_SUPPORT_PRS_ONLY /**< Use only Parser */
+ , e_FM_PORT_PCD_SUPPORT_PLCR_ONLY /**< Use only Policer */
+ , e_FM_PORT_PCD_SUPPORT_PRS_AND_PLCR /**< Use Parser and Policer */
+ , e_FM_PORT_PCD_SUPPORT_PRS_AND_KG /**< Use Parser and Keygen */
+ , e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_CC
+ /**< Use Parser, Keygen and Coarse Classification */
+ , e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_CC_AND_PLCR
+ /**< Use all PCD engines */
+ , e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_PLCR
+ /**< Use Parser, Keygen and Policer */
+ , e_FM_PORT_PCD_SUPPORT_PRS_AND_CC
+ /**< Use Parser and Coarse Classification */
+ , e_FM_PORT_PCD_SUPPORT_PRS_AND_CC_AND_PLCR
+ /**< Use Parser and Coarse Classification and Policer */
+ , e_FM_PORT_PCD_SUPPORT_CC_ONLY /**< Use only Coarse Classification */
+#ifdef FM_CAPWAP_SUPPORT
+ , e_FM_PORT_PCD_SUPPORT_CC_AND_KG
+ /**< Use Coarse Classification,and Keygen */
+ , e_FM_PORT_PCD_SUPPORT_CC_AND_KG_AND_PLCR
+ /**< Use Coarse Classification, Keygen and Policer */
+#endif /* FM_CAPWAP_SUPPORT */
+} e_FmPortPcdSupport;
+
+/**
+ @Description Port interrupts
+*/
+typedef enum e_FmPortExceptions {
+ e_FM_PORT_EXCEPTION_IM_BUSY /**< Independent-Mode Rx-BUSY */
+} e_FmPortExceptions;
+
+/**
+ @Collection General FM Port defines
+*/
+#define FM_PORT_PRS_RESULT_NUM_OF_WORDS 8
+ /**< Number of 4 bytes words in parser result */
+/* @} */
+
+/**
+ @Collection FM Frame error
+*/
+typedef uint32_t fmPortFrameErrSelect_t;
+ /**< typedef for defining Frame Descriptor errors */
+
+#define FM_PORT_FRM_ERR_UNSUPPORTED_FORMAT FM_FD_ERR_UNSUPPORTED_FORMAT
+ /**< Not for Rx-Port! Unsupported Format */
+#define FM_PORT_FRM_ERR_LENGTH FM_FD_ERR_LENGTH
+ /**< Not for Rx-Port! Length Error */
+#define FM_PORT_FRM_ERR_DMA FM_FD_ERR_DMA /**< DMA Data error */
+#define FM_PORT_FRM_ERR_NON_FM FM_FD_RX_STATUS_ERR_NON_FM
+ /**< non Frame-Manager error; probably come from SEC that
+ was chained to FM */
+
+#define FM_PORT_FRM_ERR_IPRE (FM_FD_ERR_IPR & ~FM_FD_IPR)
+ /**< IPR error */
+#define FM_PORT_FRM_ERR_IPR_NCSP (FM_FD_ERR_IPR_NCSP & ~FM_FD_IPR)
+ /**< IPR non-consistent-sp */
+
+#define FM_PORT_FRM_ERR_IPFE 0
+ /**< Obsolete; will be removed in the future */
+
+#ifdef FM_CAPWAP_SUPPORT
+#define FM_PORT_FRM_ERR_CRE FM_FD_ERR_CRE
+#define FM_PORT_FRM_ERR_CHE FM_FD_ERR_CHE
+#endif /* FM_CAPWAP_SUPPORT */
+
+#define FM_PORT_FRM_ERR_PHYSICAL FM_FD_ERR_PHYSICAL
+ /**< Rx FIFO overflow, FCS error, code error, running disparity
+ error (SGMII and TBI modes), FIFO parity error. PHY
+ Sequence error, PHY error control character detected. */
+#define FM_PORT_FRM_ERR_SIZE FM_FD_ERR_SIZE
+ /**< Frame too long OR Frame size exceeds max_length_frame*/
+#define FM_PORT_FRM_ERR_CLS_DISCARD FM_FD_ERR_CLS_DISCARD
+ /**< indicates a classifier "drop" operation */
+#define FM_PORT_FRM_ERR_EXTRACTION FM_FD_ERR_EXTRACTION
+ /**< Extract Out of Frame */
+#define FM_PORT_FRM_ERR_NO_SCHEME FM_FD_ERR_NO_SCHEME
+ /**< No Scheme Selected */
+#define FM_PORT_FRM_ERR_KEYSIZE_OVERFLOW FM_FD_ERR_KEYSIZE_OVERFLOW
+ /**< Keysize Overflow */
+#define FM_PORT_FRM_ERR_COLOR_RED FM_FD_ERR_COLOR_RED
+ /**< Frame color is red */
+#define FM_PORT_FRM_ERR_COLOR_YELLOW FM_FD_ERR_COLOR_YELLOW
+ /**< Frame color is yellow */
+#define FM_PORT_FRM_ERR_ILL_PLCR FM_FD_ERR_ILL_PLCR
+ /**< Illegal Policer Profile selected */
+#define FM_PORT_FRM_ERR_PLCR_FRAME_LEN FM_FD_ERR_PLCR_FRAME_LEN
+ /**< Policer frame length error */
+#define FM_PORT_FRM_ERR_PRS_TIMEOUT FM_FD_ERR_PRS_TIMEOUT
+ /**< Parser Time out Exceed */
+#define FM_PORT_FRM_ERR_PRS_ILL_INSTRUCT FM_FD_ERR_PRS_ILL_INSTRUCT
+ /**< Invalid Soft Parser instruction */
+#define FM_PORT_FRM_ERR_PRS_HDR_ERR FM_FD_ERR_PRS_HDR_ERR
+ /**< Header error was identified during parsing */
+#define FM_PORT_FRM_ERR_BLOCK_LIMIT_EXCEEDED FM_FD_ERR_BLOCK_LIMIT_EXCEEDED
+ /**< Frame parsed beyind 256 first bytes */
+#define FM_PORT_FRM_ERR_PROCESS_TIMEOUT 0x00000001
+ /**< FPM Frame Processing Timeout Exceeded */
+/* @} */
+
+
+/**
+ @Group FM_PORT_init_grp FM Port Initialization Unit
+
+ @Description FM Port Initialization Unit
+
+ @{
+*/
+
+/**
+ @Description Exceptions user callback routine, will be called upon an
+ exception passing the exception identification.
+
+ @Param[in] h_App - User's application descriptor.
+ @Param[in] exception - The exception.
+*/
+typedef void (t_FmPortExceptionCallback) (t_Handle h_App,
+ e_FmPortExceptions exception);
+
+/**
+ @Description User callback function called by driver with received data.
+
+ User provides this function. Driver invokes it.
+
+ @Param[in] h_App Application's handle originally specified to
+ the API Config function
+ @Param[in] p_Data A pointer to data received
+ @Param[in] length length of received data
+ @Param[in] status receive status and errors
+ @Param[in] position position of buffer in frame
+ @Param[in] h_BufContext A handle of the user acossiated with this buffer
+
+ @Retval e_RX_STORE_RESPONSE_CONTINUE - order the driver to continue Rx
+ operation for all ready data.
+ @Retval e_RX_STORE_RESPONSE_PAUSE - order the driver to stop Rx operation.
+*/
+typedef e_RxStoreResponse(t_FmPortImRxStoreCallback) (t_Handle h_App,
+ uint8_t *p_Data,
+ uint16_t length,
+ uint16_t status,
+ uint8_t position,
+ t_Handle h_BufContext);
+
+/**
+ @Description User callback function called by driver when transmit completed.
+
+ User provides this function. Driver invokes it.
+
+ @Param[in] h_App Application's handle originally specified to
+ the API Config function
+ @Param[in] p_Data A pointer to data received
+ @Param[in] status transmit status and errors
+ @Param[in] lastBuffer is last buffer in frame
+ @Param[in] h_BufContext A handle of the user acossiated with this buffer
+ */
+typedef void (t_FmPortImTxConfCallback) (t_Handle h_App,
+ uint8_t *p_Data,
+ uint16_t status,
+ t_Handle h_BufContext);
+
+/**
+ @Description A structure for additional Rx port parameters
+*/
+typedef struct t_FmPortRxParams {
+ uint32_t errFqid; /**< Error Queue Id. */
+ uint32_t dfltFqid; /**< Default Queue Id.*/
+ uint16_t liodnOffset; /**< Port's LIODN offset. */
+ t_FmExtPools extBufPools;/**< Which external buffer pools are used
+ (up to FM_PORT_MAX_NUM_OF_EXT_POOLS), and their sizes. */
+} t_FmPortRxParams;
+
+/**
+ @Description A structure for additional non-Rx port parameters
+*/
+typedef struct t_FmPortNonRxParams {
+ uint32_t errFqid; /**< Error Queue Id. */
+ uint32_t dfltFqid;/**< For Tx - Default Confirmation queue,
+ 0 means no Tx confirmation for processed
+ frames. For OP port - default Rx queue. */
+ uint32_t qmChannel;
+ /**< QM-channel dedicated to this port; will be used by the FM for dequeue. */
+} t_FmPortNonRxParams;
+
+/**
+ @Description A structure for additional Rx port parameters
+*/
+typedef struct t_FmPortImRxTxParams {
+ t_Handle h_FmMuram;
+ /**< A handle of the FM-MURAM partition */
+ uint16_t liodnOffset;
+ /**< For Rx ports only. Port's LIODN Offset. */
+ uint8_t dataMemId;
+ /**< Memory partition ID for data buffers */
+ uint32_t dataMemAttributes;
+ /**< Memory attributes for data buffers */
+ t_BufferPoolInfo rxPoolParams; /**< For Rx ports only. */
+ t_FmPortImRxStoreCallback *f_RxStore; /**< For Rx ports only. */
+ t_FmPortImTxConfCallback *f_TxConf; /**< For Tx ports only. */
+} t_FmPortImRxTxParams;
+
+/**
+ @Description A union for additional parameters depending on port type
+*/
+typedef union u_FmPortSpecificParams {
+ t_FmPortImRxTxParams imRxTxParams;
+ /**< Rx/Tx Independent-Mode port parameter structure */
+ t_FmPortRxParams rxParams; /**< Rx port parameters structure */
+ t_FmPortNonRxParams nonRxParams;/**< Non-Rx port parameters structure */
+} u_FmPortSpecificParams;
+
+/**
+ @Description A structure representing FM initialization parameters
+*/
+typedef struct t_FmPortParams {
+ uintptr_t baseAddr;
+ /**< Virtual Address of memory mapped FM Port registers.*/
+ t_Handle h_Fm;
+ /**< A handle to the FM object this port related to */
+ e_FmPortType portType; /**< Port type */
+ uint8_t portId; /**< Port Id - relative to type;
+ NOTE: When configuring Offline Parsing port for
+ FMANv3 devices (DPAA_VERSION 11 and higher),
+ it is highly recommended NOT to use portId=0 due to lack
+ of HW resources on portId=0. */
+ bool independentModeEnable;
+ /**< This port is Independent-Mode - Used for Rx/Tx ports only!*/
+ uint16_t liodnBase;
+ /**< Irrelevant for P4080 rev 1. LIODN base for this port, to be
+ used together with LIODN offset. */
+ u_FmPortSpecificParams specificParams;
+ /**< Additional parameters depending on port type. */
+
+ t_FmPortExceptionCallback *f_Exception;
+ /**< Relevant for IM only Callback routine to be called on BUSY exception */
+ t_Handle h_App;
+ /**< A handle to an application layer object; This handle will
+ be passed by the driver upon calling the above callbacks */
+} t_FmPortParams;
+
+/**
+ @Function FM_PORT_Config
+
+ @Description Creates a descriptor for the FM PORT module.
+
+ The routine returns a handle(descriptor) to the FM PORT object.
+ This descriptor must be passed as first parameter to all other
+ FM PORT function calls.
+
+ No actual initialization or configuration of FM hardware is
+ done by this routine.
+
+ @Param[in] p_FmPortParams - Pointer to data structure of parameters
+
+ @Retval Handle to FM object, or NULL for Failure.
+*/
+t_Handle FM_PORT_Config(t_FmPortParams *p_FmPortParams);
+
+/**
+ @Function FM_PORT_Init
+
+ @Description Initializes the FM PORT module by defining the software structure
+ and configuring the hardware registers.
+
+ @Param[in] h_FmPort - FM PORT module descriptor
+
+ @Return E_OK on success; Error code otherwise.
+*/
+uint32_t FM_PORT_Init(t_Handle h_FmPort);
+
+/**
+ @Function FM_PORT_Free
+
+ @Description Frees all resources that were assigned to FM PORT module.
+
+ Calling this routine invalidates the descriptor.
+
+ @Param[in] h_FmPort - FM PORT module descriptor
+
+ @Return E_OK on success; Error code otherwise.
+*/
+uint32_t FM_PORT_Free(t_Handle h_FmPort);
+
+t_Handle FM_PORT_Open(t_FmPortParams *p_FmPortParams);
+void FM_PORT_Close(t_Handle h_FmPort);
+
+
+/**
+ @Group FM_PORT_advanced_init_grp FM Port Advanced Configuration Unit
+
+ @Description Configuration functions used to change default values.
+
+ @{
+*/
+
+/**
+ @Description enum for defining QM frame dequeue
+*/
+typedef enum e_FmPortDeqType {
+ e_FM_PORT_DEQ_TYPE1, /**< Dequeue from the SP channel - with priority precedence,
+ and Intra-Class Scheduling respected. */
+ e_FM_PORT_DEQ_TYPE2, /**< Dequeue from the SP channel - with active FQ precedence,
+ and Intra-Class Scheduling respected. */
+ e_FM_PORT_DEQ_TYPE3 /**< Dequeue from the SP channel - with active FQ precedence,
+ and override Intra-Class Scheduling */
+} e_FmPortDeqType;
+
+/**
+ @Description enum for defining QM frame dequeue
+*/
+typedef enum e_FmPortDeqPrefetchOption {
+ e_FM_PORT_DEQ_NO_PREFETCH, /**< QMI preforms a dequeue action for a single frame
+ only when a dedicated portID Tnum is waiting. */
+ e_FM_PORT_DEQ_PARTIAL_PREFETCH, /**< QMI preforms a dequeue action for 3 frames
+ when one dedicated portId tnum is waiting. */
+ e_FM_PORT_DEQ_FULL_PREFETCH /**< QMI preforms a dequeue action for 3 frames when
+ no dedicated portId tnums are waiting. */
+
+} e_FmPortDeqPrefetchOption;
+
+/**
+ @Description enum for defining port default color
+*/
+typedef enum e_FmPortColor {
+ e_FM_PORT_COLOR_GREEN, /**< Default port color is green */
+ e_FM_PORT_COLOR_YELLOW, /**< Default port color is yellow */
+ e_FM_PORT_COLOR_RED, /**< Default port color is red */
+ e_FM_PORT_COLOR_OVERRIDE/**< Ignore color */
+} e_FmPortColor;
+
+/**
+ @Description A structure for defining Dual Tx rate limiting scale
+*/
+typedef enum e_FmPortDualRateLimiterScaleDown {
+ e_FM_PORT_DUAL_RATE_LIMITER_NONE = 0, /**< Use only single rate limiter*/
+ e_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_2,
+ /**< Divide high rate limiter by 2 */
+ e_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_4,
+ /**< Divide high rate limiter by 4 */
+ e_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_8
+ /**< Divide high rate limiter by 8 */
+} e_FmPortDualRateLimiterScaleDown;
+
+/**
+ @Description A structure for defining FM port resources
+*/
+typedef struct t_FmPortRsrc {
+ uint32_t num; /**< Committed required resource */
+ uint32_t extra; /**< Extra (not committed) required resource */
+} t_FmPortRsrc;
+
+/**
+ @Description A structure for defining observed pool depletion
+*/
+typedef struct t_FmPortObservedBufPoolDepletion {
+ t_FmBufPoolDepletion poolDepletionParams;
+ /**< parameters to define pool depletion */
+ t_FmExtPools poolsParams;
+ /**< Which external buffer pools are observed
+ (up to FM_PORT_MAX_NUM_OF_OBSERVED_EXT_POOLS),
+ and their sizes. */
+} t_FmPortObservedBufPoolDepletion;
+
+/**
+ @Description A structure for defining Tx rate limiting
+*/
+typedef struct t_FmPortRateLimit {
+ uint16_t maxBurstSize;
+ /**< in KBytes for Tx ports, in frames
+ for OP ports. (note that
+ for early chips burst size is
+ rounded up to a multiply of 1000 frames).*/
+ uint32_t rateLimit;
+ /**< in Kb/sec for Tx ports, in frame/sec for
+ OP ports. Rate limit refers to
+ data rate (rather than line rate). */
+ e_FmPortDualRateLimiterScaleDown rateLimitDivider;
+ /**< For OP ports only. Not-valid
+ for some earlier chip revisions */
+} t_FmPortRateLimit;
+
+/**
+ @Description A structure for defining the parameters of
+ the Rx port performance counters
+*/
+typedef struct t_FmPortPerformanceCnt {
+ uint8_t taskCompVal; /**< Task compare value */
+ uint8_t queueCompVal; /**< Rx queue/Tx confirm queue compare
+ value (unused for H/O) */
+ uint8_t dmaCompVal; /**< Dma compare value */
+ uint32_t fifoCompVal; /**< Fifo compare value (in bytes) */
+} t_FmPortPerformanceCnt;
+
+/**
+ @Description A structure for defining the sizes of the Deep Sleep
+ the Auto Response tables
+*/
+typedef struct t_FmPortDsarTablesSizes {
+ uint16_t maxNumOfArpEntries;
+ uint16_t maxNumOfEchoIpv4Entries;
+ uint16_t maxNumOfNdpEntries;
+ uint16_t maxNumOfEchoIpv6Entries;
+ uint16_t maxNumOfSnmpIPV4Entries;
+ uint16_t maxNumOfSnmpIPV6Entries;
+ uint16_t maxNumOfSnmpOidEntries;
+ uint16_t maxNumOfSnmpOidChar;
+ /* total amount of character needed for the snmp table */
+ uint16_t maxNumOfIpProtFiltering;
+ uint16_t maxNumOfTcpPortFiltering;
+ uint16_t maxNumOfUdpPortFiltering;
+} t_FmPortDsarTablesSizes;
+
+/**
+ @Function FM_PORT_ConfigDsarSupport
+
+ @Description This function will allocate the amount of MURAM needed for
+ this max number of entries for Deep Sleep Auto Response.
+ it will calculate all needed MURAM for autoresponse including
+ necessary common stuff.
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] params A pointer to a structure containing the maximum
+ sizes of the auto response tables
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_ConfigDsarSupport(t_Handle h_FmPortRx,
+ t_FmPortDsarTablesSizes *params);
+
+/**
+ @Function FM_PORT_ConfigNumOfOpenDmas
+
+ @Description Calling this routine changes the max number of open DMA's
+ available for this port. It changes this parameter in the
+ internal driver data base from its default configuration
+ [OP: 1]
+ [1G-RX, 1G-TX: 1 (+1)]
+ [10G-RX, 10G-TX: 8 (+8)]
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] p_OpenDmas A pointer to a structure of parameters defining
+ the open DMA allocation.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_ConfigNumOfOpenDmas(t_Handle h_FmPort,
+ t_FmPortRsrc *p_OpenDmas);
+
+/**
+ @Function FM_PORT_ConfigNumOfTasks
+
+ @Description Calling this routine changes the max number of tasks
+ available for this port. It changes this parameter in the
+ internal driver data base from its default configuration
+ [OP : 1]
+ [1G - RX, 1G - TX : 3 ( + 2)]
+ [10G - RX, 10G - TX : 16 ( + 8)]
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] p_NumOfTasks A pointer to a structure of parameters defining
+ the tasks allocation.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_ConfigNumOfTasks(t_Handle h_FmPort,
+ t_FmPortRsrc *p_NumOfTasks);
+
+/**
+ @Function FM_PORT_ConfigSizeOfFifo
+
+ @Description Calling this routine changes the max FIFO size configured for this port.
+
+ This function changes the internal driver data base from its
+ default configuration. Please refer to the driver's User Guide for
+ information on default FIFO sizes in the various devices.
+ [OP: 2KB]
+ [1G-RX, 1G-TX: 11KB]
+ [10G-RX, 10G-TX: 12KB]
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] p_SizeOfFifo A pointer to a structure of parameters defining
+ the FIFO allocation.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_ConfigSizeOfFifo(t_Handle h_FmPort,
+ t_FmPortRsrc *p_SizeOfFifo);
+
+/**
+ @Function FM_PORT_ConfigDeqHighPriority
+
+ @Description Calling this routine changes the dequeue priority in the
+ internal driver data base from its default configuration
+ 1G: [DEFAULT_PORT_deqHighPriority_1G]
+ 10G: [DEFAULT_PORT_deqHighPriority_10G]
+
+ May be used for Non - Rx ports only
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] highPri TRUE to select high priority, FALSE for normal operation.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_ConfigDeqHighPriority(t_Handle h_FmPort, bool highPri);
+
+/**
+ @Function FM_PORT_ConfigDeqType
+
+ @Description Calling this routine changes the dequeue type parameter in the
+ internal driver data base from its default configuration
+ [DEFAULT_PORT_deqType].
+
+ May be used for Non - Rx ports only
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] deqType According to QM definition.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_ConfigDeqType(t_Handle h_FmPort,
+ e_FmPortDeqType deqType);
+
+/**
+ @Function FM_PORT_ConfigDeqPrefetchOption
+
+ @Description Calling this routine changes the dequeue prefetch option parameter in the
+ internal driver data base from its default configuration
+ [DEFAULT_PORT_deqPrefetchOption]
+ Note: Available for some chips only
+
+ May be used for Non - Rx ports only
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] deqPrefetchOption New option
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_ConfigDeqPrefetchOption(t_Handle h_FmPort,
+ e_FmPortDeqPrefetchOption deqPrefetchOption);
+
+/**
+ @Function FM_PORT_ConfigDeqByteCnt
+
+ @Description Calling this routine changes the dequeue byte count parameter in
+ the internal driver data base from its default configuration
+ 1G:[DEFAULT_PORT_deqByteCnt_1G].
+ 10G:[DEFAULT_PORT_deqByteCnt_10G].
+
+ May be used for Non - Rx ports only
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] deqByteCnt New byte count
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_ConfigDeqByteCnt(t_Handle h_FmPort,
+ uint16_t deqByteCnt);
+
+/**
+ @Function FM_PORT_ConfigBufferPrefixContent
+
+ @Description Defines the structure, size and content of the application buffer.
+ The prefix will
+ In Tx ports, if 'passPrsResult', the application
+ should set a value to their offsets in the prefix of
+ the FM will save the first 'privDataSize', than,
+ depending on 'passPrsResult' and 'passTimeStamp', copy parse result
+ and timeStamp, and the packet itself (in this order), to the
+ application buffer, and to offset.
+ Calling this routine changes the buffer margins definitions
+ in the internal driver data base from its default
+ configuration: Data size: [DEFAULT_PORT_bufferPrefixContent_privDataSize]
+ Pass Parser result: [DEFAULT_PORT_bufferPrefixContent_passPrsResult].
+ Pass timestamp: [DEFAULT_PORT_bufferPrefixContent_passTimeStamp].
+
+ May be used for all ports
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in,out] p_FmBufferPrefixContent A structure of parameters describing the
+ structure of the buffer.
+ Out parameter: Start margin - offset
+ of data from start of external buffer.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_ConfigBufferPrefixContent(t_Handle h_FmPort,
+ t_FmBufferPrefixContent *p_FmBufferPrefixContent);
+
+/**
+ @Function FM_PORT_ConfigCheksumLastBytesIgnore
+
+ @Description Calling this routine changes the number of checksum bytes to ignore
+ parameter in the internal driver data base from its default configuration
+ [DEFAULT_PORT_cheksumLastBytesIgnore]
+
+ May be used by Tx & Rx ports only
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] cheksumLastBytesIgnore New value
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_ConfigCheksumLastBytesIgnore(t_Handle h_FmPort,
+ uint8_t cheksumLastBytesIgnore);
+
+/**
+ @Function FM_PORT_ConfigCutBytesFromEnd
+
+ @Description Calling this routine changes the number of bytes to cut from a
+ frame's end parameter in the internal driver data base
+ from its default configuration [DEFAULT_PORT_cutBytesFromEnd]
+ Note that if the result of (frame length before chop - cutBytesFromEnd) is
+ less than 14 bytes, the chop operation is not executed.
+
+ May be used for Rx ports only
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] cutBytesFromEnd New value
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_ConfigCutBytesFromEnd(t_Handle h_FmPort,
+ uint8_t cutBytesFromEnd);
+
+/**
+ @Function FM_PORT_ConfigPoolDepletion
+
+ @Description Calling this routine enables pause frame generation depending on the
+ depletion status of BM pools. It also defines the conditions to activate
+ this functionality. By default, this functionality is disabled.
+
+ May be used for Rx ports only
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] p_BufPoolDepletion A structure of pool depletion parameters
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_ConfigPoolDepletion(t_Handle h_FmPort,
+ t_FmBufPoolDepletion *p_BufPoolDepletion);
+
+/**
+ @Function FM_PORT_ConfigObservedPoolDepletion
+
+ @Description Calling this routine enables a mechanism to stop port enqueue
+ depending on the depletion status of selected BM pools.
+ It also defines the conditions to activate
+ this functionality. By default, this functionality is disabled.
+
+ Note: Available for some chips only
+
+ May be used for OP ports only
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] p_FmPortObservedBufPoolDepletion
+ A structure of parameters for pool depletion.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_ConfigObservedPoolDepletion(t_Handle h_FmPort,
+ t_FmPortObservedBufPoolDepletion *p_FmPortObservedBufPoolDepletion);
+
+/**
+ @Function FM_PORT_ConfigExtBufPools
+
+ @Description This routine should be called for OP ports
+ that internally use BM buffer pools. In such cases, e.g. for fragmentation and
+ re-assembly, the FM needs new BM buffers. By calling this routine the user
+ specifies the BM buffer pools that should be used.
+
+ Note: Available for some chips only
+
+ May be used for OP ports only
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] p_FmExtPools A structure of parameters for the external pools.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_ConfigExtBufPools(t_Handle h_FmPort,
+ t_FmExtPools *p_FmExtPools);
+
+/**
+ @Function FM_PORT_ConfigBackupPools
+
+ @Description Calling this routine allows the configuration of some of the BM pools
+ defined for this port as backup pools.
+ A pool configured to be a backup pool will be used only if all other
+ enabled non - backup pools are depleted.
+
+ May be used for Rx ports only
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] p_FmPortBackupBmPools An array of pool id's. All pools specified here will
+ be defined as backup pools.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_ConfigBackupPools(t_Handle h_FmPort,
+ t_FmBackupBmPools *p_FmPortBackupBmPools);
+
+/**
+ @Function FM_PORT_ConfigFrmDiscardOverride
+
+ @Description Calling this routine changes the error frames destination parameter
+ in the internal driver data base from its default configuration :
+ override =[DEFAULT_PORT_frmDiscardOverride]
+
+ May be used for Rx and OP ports only
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] override TRUE to override discarding of error frames and
+ enqueueing them to error queue.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_ConfigFrmDiscardOverride(t_Handle h_FmPort,
+ bool override);
+
+/**
+ @Function FM_PORT_ConfigErrorsToDiscard
+
+ @Description Calling this routine changes the behaviour on error parameter
+ in the internal driver data base from its default configuration :
+ [DEFAULT_PORT_errorsToDiscard].
+ If a requested error was previously defined as "ErrorsToEnqueue" it's
+ definition will change and the frame will be discarded.
+ Errors that were not defined either as "ErrorsToEnqueue" nor as
+ "ErrorsToDiscard", will be forwarded to CPU.
+
+ May be used for Rx and OP ports only
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] errs A list of errors to discard
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_ConfigErrorsToDiscard(t_Handle h_FmPort,
+ fmPortFrameErrSelect_t errs);
+
+/**
+ @Function FM_PORT_ConfigDmaSwapData
+
+ @Description Calling this routine changes the DMA swap data aparameter
+ in the internal driver data base from its default
+ configuration[DEFAULT_PORT_dmaSwapData]
+
+ May be used for all port types
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] swapData New selection
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_ConfigDmaSwapData(t_Handle h_FmPort,
+ e_FmDmaSwapOption swapData);
+
+/**
+ @Function FM_PORT_ConfigDmaIcCacheAttr
+
+ @Description Calling this routine changes the internal context cache
+ attribute parameter in the internal driver data base
+ from its default configuration[DEFAULT_PORT_dmaIntContextCacheAttr]
+
+ May be used for all port types
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] intContextCacheAttr New selection
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_ConfigDmaIcCacheAttr(t_Handle h_FmPort,
+ e_FmDmaCacheOption intContextCacheAttr);
+
+/**
+ @Function FM_PORT_ConfigDmaHdrAttr
+
+ @Description Calling this routine changes the header cache
+ attribute parameter in the internal driver data base
+ from its default configuration[DEFAULT_PORT_dmaHeaderCacheAttr]
+
+ May be used for all port types
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] headerCacheAttr New selection
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_ConfigDmaHdrAttr(t_Handle h_FmPort,
+ e_FmDmaCacheOption headerCacheAttr);
+
+/**
+ @Function FM_PORT_ConfigDmaScatterGatherAttr
+
+ @Description Calling this routine changes the scatter gather cache
+ attribute parameter in the internal driver data base
+ from its default configuration[DEFAULT_PORT_dmaScatterGatherCacheAttr]
+
+ May be used for all port types
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] scatterGatherCacheAttr New selection
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_ConfigDmaScatterGatherAttr(t_Handle h_FmPort,
+ e_FmDmaCacheOption scatterGatherCacheAttr);
+
+/**
+ @Function FM_PORT_ConfigDmaWriteOptimize
+
+ @Description Calling this routine changes the write optimization
+parameter in the internal driver data base
+from its default configuration : By default optimize = [DEFAULT_PORT_dmaWriteOptimize].
+Note:
+
+1. For head optimization, data alignment must be >= 16 (supported by default).
+
+3. For tail optimization, note that the optimization is performed by extending the write transaction
+of the frame payload at the tail as needed to achieve optimal bus transfers, so that the last write
+is extended to be on 16 / 64 bytes aligned block (chip dependent).
+
+Relevant for non - Tx port types
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] optimize TRUE to enable optimization, FALSE for normal operation
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_ConfigDmaWriteOptimize(t_Handle h_FmPort,
+ bool optimize);
+
+/**
+ @Function FM_PORT_ConfigNoScatherGather
+
+ @Description Calling this routine changes the noScatherGather parameter in internal driver
+ data base from its default configuration.
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] noScatherGather
+ (TRUE - frame is discarded if can not be stored in single buffer,
+ FALSE - frame can be stored in scatter gather (S / G) format).
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_ConfigNoScatherGather(t_Handle h_FmPort,
+ bool noScatherGather);
+
+/**
+ @Function FM_PORT_ConfigDfltColor
+
+ @Description Calling this routine changes the internal default color parameter
+ in the internal driver data base
+ from its default configuration[DEFAULT_PORT_color]
+
+ May be used for all port types
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] color New selection
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_ConfigDfltColor(t_Handle h_FmPort, e_FmPortColor color);
+
+/**
+ @Function FM_PORT_ConfigSyncReq
+
+ @Description Calling this routine changes the synchronization attribute parameter
+ in the internal driver data base from its default configuration :
+ syncReq =[DEFAULT_PORT_syncReq]
+
+ May be used for all port types
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] syncReq TRUE to request synchronization, FALSE otherwize.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_ConfigSyncReq(t_Handle h_FmPort, bool syncReq);
+
+/**
+ @Function FM_PORT_ConfigForwardReuseIntContext
+
+ @Description This routine is relevant for Rx ports that are routed to OP port.
+ It changes the internal context reuse option in the internal
+ driver data base from its default configuration :
+ reuse =[DEFAULT_PORT_forwardIntContextReuse]
+
+ May be used for Rx ports only
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] reuse TRUE to reuse internal context on frames
+ forwarded to OP port.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_ConfigForwardReuseIntContext(t_Handle h_FmPort,
+ bool reuse);
+
+/**
+ @Function FM_PORT_ConfigDontReleaseTxBufToBM
+
+ @Description This routine should be called if no Tx confirmation
+ is done, and yet buffers should not be released to the BM.
+
+ Normally, buffers are returned using the Tx confirmation
+ process. When Tx confirmation is not used (defFqid = 0),
+ buffers are typically released to the BM. This routine
+ may be called to avoid this behavior and not release the
+ buffers.
+
+ May be used for Tx ports only
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_ConfigDontReleaseTxBufToBM(t_Handle h_FmPort);
+
+/**
+ @Function FM_PORT_ConfigIMMaxRxBufLength
+
+ @Description Changes the maximum receive buffer length from its default
+ configuration: Closest rounded down power of 2 value of the
+ data buffer size.
+
+ The maximum receive buffer length directly affects the structure
+ of received frames (single- or multi-buffered) and the performance
+ of both the FM and the driver.
+
+ The selection between single- or multi-buffered frames should be
+ done according to the characteristics of the specific application.
+ The recommended mode is to use a single data buffer per packet,
+ as this mode provides the best performance. However, the user can
+ select to use multiple data buffers per packet.
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] newVal Maximum receive buffer length (in bytes).
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+ This routine is to be used only if Independent-Mode is enabled.
+*/
+uint32_t FM_PORT_ConfigIMMaxRxBufLength(t_Handle h_FmPort,
+ uint16_t newVal);
+
+/**
+ @Function FM_PORT_ConfigIMRxBdRingLength
+
+ @Description Changes the receive BD ring length from its default
+ configuration:[DEFAULT_PORT_rxBdRingLength]
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] newVal The desired BD ring length.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+ This routine is to be used only if Independent-Mode is enabled.
+*/
+uint32_t FM_PORT_ConfigIMRxBdRingLength(t_Handle h_FmPort,
+ uint16_t newVal);
+
+/**
+ @Function FM_PORT_ConfigIMTxBdRingLength
+
+ @Description Changes the transmit BD ring length from its default
+ configuration:[DEFAULT_PORT_txBdRingLength]
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] newVal The desired BD ring length.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+ This routine is to be used only if Independent-Mode is enabled.
+*/
+uint32_t FM_PORT_ConfigIMTxBdRingLength(t_Handle h_FmPort,
+ uint16_t newVal);
+
+/**
+ @Function FM_PORT_ConfigIMFmanCtrlExternalStructsMemory
+
+ @Description Configures memory partition and attributes for FMan-Controller
+ data structures (e.g. BD rings).
+ Calling this routine changes the internal driver data base
+ from its default configuration
+ [DEFAULT_PORT_ImfwExtStructsMemId,
+ DEFAULT_PORT_ImfwExtStructsMemAttr].
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] memId Memory partition ID.
+ @Param[in] memAttributes Memory attributes mask
+ (a combination of MEMORY_ATTR_x flags).
+
+ @Return E_OK on success; Error code otherwise.
+*/
+uint32_t FM_PORT_ConfigIMFmanCtrlExternalStructsMemory(
+ t_Handle h_FmPort,
+ uint8_t memId,
+ uint32_t memAttributes);
+
+/**
+ @Function FM_PORT_ConfigIMPolling
+
+ @Description Changes the Rx flow from interrupt driven (default) to polling.
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+ This routine is to be used only if Independent-Mode is enabled.
+*/
+uint32_t FM_PORT_ConfigIMPolling(t_Handle h_FmPort);
+
+/**
+ @Function FM_PORT_ConfigMaxFrameLength
+
+ @Description Changes the definition of the max size of frame that should be
+ transmitted/received on this port from
+ its default value [DEFAULT_PORT_maxFrameLength].
+ This parameter is used for confirmation of the minimum Fifo
+ size calculations and only for Tx ports or ports working in
+ independent mode. This should be larger than the maximum possible
+ MTU that will be used for this port (i.e. its MAC).
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] length Max size of frame
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+ This routine is to be used only if Independent-Mode is enabled.
+*/
+uint32_t FM_PORT_ConfigMaxFrameLength(t_Handle h_FmPort,
+ uint16_t length);
+
+/*
+ @Function FM_PORT_ConfigTxFifoMinFillLevel
+
+ @Description Calling this routine changes the fifo minimum
+ fill level parameter in the internal driver data base
+ from its default configuration[DEFAULT_PORT_txFifoMinFillLevel]
+
+ May be used for Tx ports only
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] minFillLevel New value
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_ConfigTxFifoMinFillLevel(t_Handle h_FmPort,
+ uint32_t minFillLevel);
+
+/*
+ @Function FM_PORT_ConfigFifoDeqPipelineDepth
+
+ @Description Calling this routine changes the fifo dequeue
+ pipeline depth parameter in the internal driver data base
+
+ from its default configuration :
+ 1G ports : [DEFAULT_PORT_fifoDeqPipelineDepth_1G],
+ 10G port : [DEFAULT_PORT_fifoDeqPipelineDepth_10G],
+ OP port : [DEFAULT_PORT_fifoDeqPipelineDepth_OH]
+
+ May be used for Tx / OP ports only
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] deqPipelineDepth New value
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_ConfigFifoDeqPipelineDepth(t_Handle h_FmPort,
+ uint8_t deqPipelineDepth);
+
+/*
+ @Function FM_PORT_ConfigTxFifoLowComfLevel
+
+ @Description Calling this routine changes the fifo low comfort level
+ parameter in internal driver data base
+ from its default configuration[DEFAULT_PORT_txFifoLowComfLevel]
+
+ May be used for Tx ports only
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] fifoLowComfLevel New value
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_ConfigTxFifoLowComfLevel(t_Handle h_FmPort,
+ uint32_t fifoLowComfLevel);
+
+/*
+ @Function FM_PORT_ConfigRxFifoThreshold
+
+ @Description Calling this routine changes the threshold of the FIFO
+ fill level parameter in the internal driver data base
+ from its default configuration[DEFAULT_PORT_rxFifoThreshold]
+
+ If the total number of buffers which are
+ currently in use and associated with the
+ specific RX port exceed this threshold, the
+ BMI will signal the MAC to send a pause frame
+ over the link.
+
+ May be used for Rx ports only
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] fifoThreshold New value
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_ConfigRxFifoThreshold(t_Handle h_FmPort,
+ uint32_t fifoThreshold);
+
+/*
+ @Function FM_PORT_ConfigRxFifoPriElevationLevel
+
+ @Description Calling this routine changes the priority elevation level
+ parameter in the internal driver data base from its default
+ configuration[DEFAULT_PORT_rxFifoPriElevationLevel]
+
+ If the total number of buffers which are currently in use and
+ associated with the specific RX port exceed the amount specified
+ in priElevationLevel, BMI will signal the main FM's DMA to
+
+ elevate the FM priority on the system bus.
+
+ May be used for Rx ports only
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] priElevationLevel New value
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_ConfigRxFifoPriElevationLevel(t_Handle h_FmPort,
+ uint32_t priElevationLevel);
+
+#ifdef FM_HEAVY_TRAFFIC_HANG_ERRATA_FMAN_A005669
+/*
+ @Function FM_PORT_ConfigBCBWorkaround
+
+ @Description Configures BCB errata workaround.
+
+ When BCB errata is applicable, the workaround is always
+ performed by FM Controller. Thus, this functions doesn't
+ actually enable errata workaround but rather allows driver
+ to perform adjustments required due to errata workaround
+ execution in FM controller.
+
+ Applying BCB workaround also configures FM_PORT_FRM_ERR_PHYSICAL
+ errors to be discarded. Thus FM_PORT_FRM_ERR_PHYSICAL can't be
+ set by FM_PORT_SetErrorsRoute() function.
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_ConfigBCBWorkaround(t_Handle h_FmPort);
+#endif /* FM_HEAVY_TRAFFIC_HANG_ERRATA_FMAN_A005669 */
+
+#if (DPAA_VERSION >= 11)
+/*
+ @Function FM_PORT_ConfigInternalBuffOffset
+
+ @Description Configures internal buffer offset.
+
+ May be used for Rx and OP ports only
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] val New value
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_ConfigInternalBuffOffset(t_Handle h_FmPort, uint8_t val);
+#endif /* (DPAA_VERSION >= 11) */
+
+/** @} */ /* end of FM_PORT_advanced_init_grp group */
+/** @} */ /* end of FM_PORT_init_grp group */
+
+/**
+ @Group FM_PORT_runtime_control_grp FM Port Runtime Control Unit
+
+ @Description FM Port Runtime control unit API functions, definitions and enums.
+
+ @{
+*/
+
+/**
+ @Description enum for defining FM Port counters
+*/
+typedef enum e_FmPortCounters {
+ e_FM_PORT_COUNTERS_CYCLE, /**< BMI performance counter */
+ e_FM_PORT_COUNTERS_TASK_UTIL, /**< BMI performance counter */
+ e_FM_PORT_COUNTERS_QUEUE_UTIL, /**< BMI performance counter */
+ e_FM_PORT_COUNTERS_DMA_UTIL, /**< BMI performance counter */
+ e_FM_PORT_COUNTERS_FIFO_UTIL, /**< BMI performance counter */
+ e_FM_PORT_COUNTERS_RX_PAUSE_ACTIVATION,
+ /**< BMI Rx only performance counter */
+ e_FM_PORT_COUNTERS_FRAME, /**< BMI statistics counter */
+ e_FM_PORT_COUNTERS_DISCARD_FRAME, /**< BMI statistics counter */
+ e_FM_PORT_COUNTERS_DEALLOC_BUF, /**< BMI deallocate buffer statistics counter */
+ e_FM_PORT_COUNTERS_RX_BAD_FRAME, /**< BMI Rx only statistics counter */
+ e_FM_PORT_COUNTERS_RX_LARGE_FRAME, /**< BMI Rx only statistics counter */
+ e_FM_PORT_COUNTERS_RX_FILTER_FRAME,/**< BMI Rx & OP only statistics counter */
+ e_FM_PORT_COUNTERS_RX_LIST_DMA_ERR,
+ /**< BMI Rx, OP & HC only statistics counter */
+ e_FM_PORT_COUNTERS_RX_OUT_OF_BUFFERS_DISCARD,
+ /**< BMI Rx, OP & HC statistics counter */
+ e_FM_PORT_COUNTERS_PREPARE_TO_ENQUEUE_COUNTER,
+ /**< BMI Rx, OP & HC only statistics counter */
+ e_FM_PORT_COUNTERS_WRED_DISCARD,/**< BMI OP & HC only statistics counter */
+ e_FM_PORT_COUNTERS_LENGTH_ERR, /**< BMI non-Rx statistics counter */
+ e_FM_PORT_COUNTERS_UNSUPPRTED_FORMAT, /**< BMI non-Rx statistics counter */
+ e_FM_PORT_COUNTERS_DEQ_TOTAL, /**< QMI total QM dequeues counter */
+ e_FM_PORT_COUNTERS_ENQ_TOTAL, /**< QMI total QM enqueues counter */
+ e_FM_PORT_COUNTERS_DEQ_FROM_DEFAULT, /**< QMI counter */
+ e_FM_PORT_COUNTERS_DEQ_CONFIRM /**< QMI counter */
+} e_FmPortCounters;
+
+typedef struct t_FmPortBmiStats {
+ uint32_t cntCycle;
+ uint32_t cntTaskUtil;
+ uint32_t cntQueueUtil;
+ uint32_t cntDmaUtil;
+ uint32_t cntFifoUtil;
+ uint32_t cntRxPauseActivation;
+ uint32_t cntFrame;
+ uint32_t cntDiscardFrame;
+ uint32_t cntDeallocBuf;
+ uint32_t cntRxBadFrame;
+ uint32_t cntRxLargeFrame;
+ uint32_t cntRxFilterFrame;
+ uint32_t cntRxListDmaErr;
+ uint32_t cntRxOutOfBuffersDiscard;
+ uint32_t cntWredDiscard;
+ uint32_t cntLengthErr;
+ uint32_t cntUnsupportedFormat;
+} t_FmPortBmiStats;
+
+/**
+ @Description Structure for Port id parameters.
+ Fields commented 'IN' are passed by the port module to be used
+ by the FM module.
+ Fields commented 'OUT' will be filled by FM before returning to port.
+*/
+typedef struct t_FmPortCongestionGrps {
+ uint16_t numOfCongestionGrpsToConsider;
+ /**< The number of required CGs
+ to define the size of the following array */
+ uint8_t congestionGrpsToConsider[FM_PORT_NUM_OF_CONGESTION_GRPS];
+ /**< An array of CG indexes;
+ Note that the size of the array should be
+ 'numOfCongestionGrpsToConsider'. */
+#if (DPAA_VERSION >= 11)
+ bool pfcPrioritiesEn[FM_PORT_NUM_OF_CONGESTION_GRPS][FM_MAX_NUM_OF_PFC_PRIORITIES];
+ /**< a matrix that represents the map between the CG ids
+ defined in 'congestionGrpsToConsider' to the priorties
+ mapping array. */
+#endif /* (DPAA_VERSION >= 11) */
+} t_FmPortCongestionGrps;
+
+/**
+ @Description Structure for Deep Sleep Auto Response ARP Entry
+*/
+typedef struct t_FmPortDsarArpEntry {
+ uint32_t ipAddress;
+ uint8_t mac[6];
+ bool isVlan;
+ uint16_t vid;
+} t_FmPortDsarArpEntry;
+
+/**
+ @Description Structure for Deep Sleep Auto Response ARP info
+*/
+typedef struct t_FmPortDsarArpInfo {
+ uint8_t tableSize;
+ t_FmPortDsarArpEntry *p_AutoResTable;
+ bool enableConflictDetection;
+ /* when TRUE Conflict Detection will be checked and wake the host if needed */
+} t_FmPortDsarArpInfo;
+
+/**
+ @Description Structure for Deep Sleep Auto Response NDP Entry
+*/
+typedef struct t_FmPortDsarNdpEntry {
+ uint32_t ipAddress[4];
+ uint8_t mac[6];
+ bool isVlan;
+ uint16_t vid;
+} t_FmPortDsarNdpEntry;
+
+/**
+ @Description Structure for Deep Sleep Auto Response NDP info
+*/
+typedef struct t_FmPortDsarNdpInfo {
+ uint32_t multicastGroup;
+
+ uint8_t tableSizeAssigned;
+ t_FmPortDsarNdpEntry *p_AutoResTableAssigned;
+ /* This list refer to solicitation IP addresses.
+ Note that all IP addresses must be from the same multicast group.
+ This will be checked and if not operation will fail. */
+ uint8_t tableSizeTmp;
+ t_FmPortDsarNdpEntry *p_AutoResTableTmp;
+ /* This list refer to temp IP addresses.
+ Note that all temp IP addresses must be from the same multicast group.
+ This will be checked and if not operation will fail. */
+
+ bool enableConflictDetection;
+ /* when TRUE Conflict Detection will be checked and wake the host if needed */
+
+} t_FmPortDsarNdpInfo;
+
+/**
+ @Description Structure for Deep Sleep Auto Response ICMPV4 info
+*/
+typedef struct t_FmPortDsarEchoIpv4Info {
+ uint8_t tableSize;
+ t_FmPortDsarArpEntry *p_AutoResTable;
+} t_FmPortDsarEchoIpv4Info;
+
+/**
+ @Description Structure for Deep Sleep Auto Response ICMPV6 info
+*/
+typedef struct t_FmPortDsarEchoIpv6Info {
+ uint8_t tableSize;
+ t_FmPortDsarNdpEntry *p_AutoResTable;
+} t_FmPortDsarEchoIpv6Info;
+
+/**
+@Description Deep Sleep Auto Response SNMP OIDs table entry
+
+*/
+typedef struct {
+ uint16_t oidSize;
+ uint8_t *oidVal; /* only the oid string */
+ uint16_t resSize;
+ uint8_t *resVal; /* resVal will be the entire reply,
+ i.e. "Type|Length|Value" */
+} t_FmPortDsarOidsEntry;
+
+/**
+ @Description Deep Sleep Auto Response SNMP IPv4 Addresses Table Entry
+ Refer to the FMan Controller spec for more details.
+*/
+typedef struct {
+ uint32_t ipv4Addr; /*!< 32 bit IPv4 Address. */
+ bool isVlan;
+ uint16_t vid; /*!< 12 bits VLAN ID. The 4 left-most bits should be cleared*/
+ /*!< This field should be 0x0000 for an entry with no VLAN tag or a null VLAN ID. */
+} t_FmPortDsarSnmpIpv4AddrTblEntry;
+
+/**
+ @Description Deep Sleep Auto Response SNMP IPv6 Addresses Table Entry
+ Refer to the FMan Controller spec for more details.
+*/
+typedef struct {
+ uint32_t ipv6Addr[4]; /*!< 4 * 32 bit IPv6 Address.*/
+ bool isVlan;
+ uint16_t vid; /*!< 12 bits VLAN ID. The 4 left-most bits should be cleared*/
+ /*!< This field should be 0x0000 for an entry with no VLAN tag or a null VLAN ID. */
+} t_FmPortDsarSnmpIpv6AddrTblEntry;
+
+/**
+ @Description Deep Sleep Auto Response SNMP Descriptor
+
+*/
+typedef struct {
+ uint16_t control; /**< Control bits [0-15]. */
+ uint16_t maxSnmpMsgLength;/**< Maximal allowed SNMP message length. */
+ uint16_t numOfIpv4Addresses; /**< Number of entries in IPv4 addresses table. */
+ uint16_t numOfIpv6Addresses; /**< Number of entries in IPv6 addresses table. */
+ t_FmPortDsarSnmpIpv4AddrTblEntry *p_Ipv4AddrTbl;
+ /**< Pointer to IPv4 addresses table. */
+ t_FmPortDsarSnmpIpv6AddrTblEntry *p_Ipv6AddrTbl;
+ /**< Pointer to IPv6 addresses table. */
+ uint8_t *p_RdOnlyCommunityStr;
+ /**< Pointer to the Read Only Community String. */
+ uint8_t *p_RdWrCommunityStr;/**< Pointer to the Read Write Community String. */
+ t_FmPortDsarOidsEntry *p_OidsTbl;/**< Pointer to OIDs table. */
+ uint32_t oidsTblSize; /**< Number of entries in OIDs table. */
+} t_FmPortDsarSnmpInfo;
+
+/**
+ @Description Structure for Deep Sleep Auto Response filtering Entry
+*/
+typedef struct t_FmPortDsarFilteringEntry {
+ uint16_t srcPort;
+ uint16_t dstPort;
+ uint16_t srcPortMask;
+ uint16_t dstPortMask;
+} t_FmPortDsarFilteringEntry;
+
+/**
+ @Description Structure for Deep Sleep Auto Response filtering info
+*/
+typedef struct t_FmPortDsarFilteringInfo {
+ /* IP protocol filtering parameters */
+ uint8_t ipProtTableSize;
+ uint8_t *p_IpProtTablePtr;
+ bool ipProtPassOnHit;
+ /* when TRUE, miss in the table will cause the packet to be droped,
+ hit will pass the packet to UDP/TCP filters if needed and if not
+ to the classification tree. If the classification tree will pass
+ the packet to a queue it will cause a wake interupt.
+ When FALSE it the other way around. */
+ /* UDP port filtering parameters */
+ uint8_t udpPortsTableSize;
+ t_FmPortDsarFilteringEntry *p_UdpPortsTablePtr;
+ bool udpPortPassOnHit;
+ /* when TRUE, miss in the table will cause the packet to be droped,
+ hit will pass the packet to classification tree.
+ If the classification tree will pass the packet to a queue it
+ will cause a wake interupt.
+ When FALSE it the other way around. */
+ /* TCP port filtering parameters */
+ uint16_t tcpFlagsMask;
+ uint8_t tcpPortsTableSize;
+ t_FmPortDsarFilteringEntry *p_TcpPortsTablePtr;
+ bool tcpPortPassOnHit;
+ /* when TRUE, miss in the table will cause the packet to be droped,
+ hit will pass the packet to classification tree.
+ If the classification tree will pass the packet to a queue it
+ will cause a wake interupt.
+ When FALSE it the other way around. */
+} t_FmPortDsarFilteringInfo;
+
+/**
+ @Description Structure for Deep Sleep Auto Response parameters
+*/
+typedef struct t_FmPortDsarParams {
+ t_Handle h_FmPortTx;
+ t_FmPortDsarArpInfo *p_AutoResArpInfo;
+ t_FmPortDsarEchoIpv4Info *p_AutoResEchoIpv4Info;
+ t_FmPortDsarNdpInfo *p_AutoResNdpInfo;
+ t_FmPortDsarEchoIpv6Info *p_AutoResEchoIpv6Info;
+ t_FmPortDsarSnmpInfo *p_AutoResSnmpInfo;
+ t_FmPortDsarFilteringInfo *p_AutoResFilteringInfo;
+} t_FmPortDsarParams;
+
+/**
+ @Function FM_PORT_EnterDsar
+
+ @Description Enter Deep Sleep Auto Response mode.
+ This function write the appropriate values to in the relevant
+ tables in the MURAM.
+
+ @Param[in] h_FmPortRx - FM PORT module descriptor
+ @Param[in] params - Auto Response parameters
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init().
+*/
+uint32_t FM_PORT_EnterDsar(t_Handle h_FmPortRx,
+ t_FmPortDsarParams *params);
+
+/**
+ @Function FM_PORT_EnterDsarFinal
+
+ @Description Enter Deep Sleep Auto Response mode.
+ This function sets the Tx port in independent mode as needed
+ and redirect the receive flow to go through the
+ Dsar Fman-ctrl code
+
+ @Param[in] h_DsarRxPort - FM Rx PORT module descriptor
+ @Param[in] h_DsarTxPort - FM Tx PORT module descriptor
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init().
+*/
+uint32_t FM_PORT_EnterDsarFinal(t_Handle h_DsarRxPort,
+ t_Handle h_DsarTxPort);
+
+/**
+ @Function FM_PORT_ExitDsar
+
+ @Description Exit Deep Sleep Auto Response mode.
+ This function reverse the AR mode and put the ports back into
+ their original wake mode
+
+ @Param[in] h_FmPortRx - FM PORT Rx module descriptor
+ @Param[in] h_FmPortTx - FM PORT Tx module descriptor
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_EnterDsar().
+*/
+void FM_PORT_ExitDsar(t_Handle h_FmPortRx, t_Handle h_FmPortTx);
+
+/**
+ @Function FM_PORT_IsInDsar
+
+ @Description This function returns TRUE if the port was set as Auto Response
+ and FALSE if not. Once Exit AR mode it will return FALSE as well
+ until re-enabled once more.
+
+ @Param[in] h_FmPort - FM PORT module descriptor
+
+ @Return E_OK on success; Error code otherwise.
+*/
+bool FM_PORT_IsInDsar(t_Handle h_FmPort);
+
+typedef struct t_FmPortDsarStats {
+ uint32_t arpArCnt;
+ uint32_t echoIcmpv4ArCnt;
+ uint32_t ndpArCnt;
+ uint32_t echoIcmpv6ArCnt;
+ uint32_t snmpGetCnt;
+ uint32_t snmpGetNextCnt;
+} t_FmPortDsarStats;
+
+/**
+ @Function FM_PORT_GetDsarStats
+
+ @Description Return statistics for Deep Sleep Auto Response
+
+ @Param[in] h_FmPortRx - FM PORT module descriptor
+ @Param[out] stats - structure containing the statistics counters
+
+ @Return E_OK on success; Error code otherwise.
+*/
+uint32_t FM_PORT_GetDsarStats(t_Handle h_FmPortRx,
+ t_FmPortDsarStats *stats);
+
+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
+/**
+ @Function FM_PORT_DumpRegs
+
+ @Description Dump all regs.
+
+ Calling this routine invalidates the descriptor.
+
+ @Param[in] h_FmPort - FM PORT module descriptor
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init().
+*/
+uint32_t FM_PORT_DumpRegs(t_Handle h_FmPort);
+#endif /* (defined(DEBUG_ERRORS) && ... */
+
+/**
+ @Function FM_PORT_GetBufferDataOffset
+
+ @Description Relevant for Rx ports.
+ Returns the data offset from the beginning of the data buffer
+
+ @Param[in] h_FmPort - FM PORT module descriptor
+
+ @Return data offset.
+
+ @Cautions Allowed only following FM_PORT_Init().
+*/
+uint32_t FM_PORT_GetBufferDataOffset(t_Handle h_FmPort);
+
+/**
+ @Function FM_PORT_GetBufferICInfo
+
+ @Description Returns the Internal Context offset from the beginning of the data buffer
+
+ @Param[in] h_FmPort - FM PORT module descriptor
+ @Param[in] p_Data - A pointer to the data buffer.
+
+ @Return Internal context info pointer on success, NULL if 'allOtherInfo' was not
+ configured for this port.
+
+ @Cautions Allowed only following FM_PORT_Init().
+*/
+uint8_t *FM_PORT_GetBufferICInfo(t_Handle h_FmPort, char *p_Data);
+
+/**
+ @Function FM_PORT_GetBufferPrsResult
+
+ @Description Returns the pointer to the parse result in the data buffer.
+ In Rx ports this is relevant after reception, if parse
+ result is configured to be part of the data passed to the
+ application. For non Rx ports it may be used to get the pointer
+ of the area in the buffer where parse result should be
+ initialized - if so configured.
+ See FM_PORT_ConfigBufferPrefixContent for data buffer prefix
+ configuration.
+
+ @Param[in] h_FmPort - FM PORT module descriptor
+ @Param[in] p_Data - A pointer to the data buffer.
+
+ @Return Parse result pointer on success, NULL if parse result was not
+ configured for this port.
+
+ @Cautions Allowed only following FM_PORT_Init().
+*/
+t_FmPrsResult *FM_PORT_GetBufferPrsResult(t_Handle h_FmPort,
+ char *p_Data);
+
+/**
+ @Function FM_PORT_GetBufferTimeStamp
+
+ @Description Returns the time stamp in the data buffer.
+ Relevant for Rx ports for getting the buffer time stamp.
+ See FM_PORT_ConfigBufferPrefixContent for data buffer prefix
+ configuration.
+
+ @Param[in] h_FmPort - FM PORT module descriptor
+ @Param[in] p_Data - A pointer to the data buffer.
+
+ @Return A pointer to the hash result on success, NULL otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init().
+*/
+uint64_t *FM_PORT_GetBufferTimeStamp(t_Handle h_FmPort, char *p_Data);
+
+/**
+ @Function FM_PORT_GetBufferHashResult
+
+ @Description Given a data buffer, on the condition that hash result was defined
+ as a part of the buffer content(see FM_PORT_ConfigBufferPrefixContent)
+ this routine will return the pointer to the hash result location in the
+ buffer prefix.
+
+ @Param[in] h_FmPort - FM PORT module descriptor
+ @Param[in] p_Data - A pointer to the data buffer.
+
+ @Return A pointer to the hash result on success, NULL otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init().
+*/
+uint8_t *FM_PORT_GetBufferHashResult(t_Handle h_FmPort, char *p_Data);
+
+/**
+ @Function FM_PORT_Disable
+
+ @Description Gracefully disable an FM port. The port will not start new tasks after all
+ tasks associated with the port are terminated.
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init().
+ This is a blocking routine, it returns after port is
+ gracefully stopped, i.e. the port will not except new frames,
+ but it will finish all frames or tasks which were already began
+*/
+uint32_t FM_PORT_Disable(t_Handle h_FmPort);
+
+/**
+ @Function FM_PORT_Enable
+
+ @Description A runtime routine provided to allow disable/enable of port.
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init().
+*/
+uint32_t FM_PORT_Enable(t_Handle h_FmPort);
+
+/**
+ @Function FM_PORT_SetRateLimit
+
+ @Description Calling this routine enables rate limit algorithm.
+ By default, this functionality is disabled.
+
+ Note that rate - limit mechanism uses the FM time stamp.
+ The selected rate limit specified here would be
+ rounded DOWN to the nearest 16M.
+
+ May be used for Tx and OP ports only
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] p_RateLimit A structure of rate limit parameters
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init().
+ If rate limit is set on a port that need to send PFC frames,
+ it might violate the stop transmit timing.
+*/
+uint32_t FM_PORT_SetRateLimit(t_Handle h_FmPort,
+ t_FmPortRateLimit *p_RateLimit);
+
+/**
+ @Function FM_PORT_DeleteRateLimit
+
+ @Description Calling this routine disables and clears rate limit
+ initialization.
+
+ May be used for Tx and OP ports only
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init().
+*/
+uint32_t FM_PORT_DeleteRateLimit(t_Handle h_FmPort);
+
+/**
+ @Function FM_PORT_SetPfcPrioritiesMappingToQmanWQ
+
+ @Description Calling this routine maps each PFC received priority to the transmit WQ.
+ This WQ will be blocked upon receiving a PFC frame with this priority.
+
+ May be used for Tx ports only.
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] prio PFC priority (0 - 7).
+ @Param[in] wq Work Queue (0 - 7).
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init().
+*/
+uint32_t FM_PORT_SetPfcPrioritiesMappingToQmanWQ(t_Handle h_FmPort,
+ uint8_t prio, uint8_t wq);
+
+/**
+ @Function FM_PORT_SetStatisticsCounters
+
+ @Description Calling this routine enables/disables port's statistics counters.
+ By default, counters are enabled.
+
+ May be used for all port types
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] enable TRUE to enable, FALSE to disable.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init().
+*/
+uint32_t FM_PORT_SetStatisticsCounters(t_Handle h_FmPort, bool enable);
+
+/**
+ @Function FM_PORT_SetFrameQueueCounters
+
+ @Description Calling this routine enables/disables port's enqueue/dequeue counters.
+ By default, counters are enabled.
+
+ May be used for all ports
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] enable TRUE to enable, FALSE to disable.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init().
+*/
+uint32_t FM_PORT_SetFrameQueueCounters(t_Handle h_FmPort,
+ bool enable);
+
+/**
+ @Function FM_PORT_AnalyzePerformanceParams
+
+ @Description User may call this routine to so the driver will analyze if the
+ basic performance parameters are correct and also the driver may
+ suggest of improvements; The basic parameters are FIFO sizes, number
+ of DMAs and number of TNUMs for the port.
+
+ May be used for all port types
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init().
+*/
+uint32_t FM_PORT_AnalyzePerformanceParams(t_Handle h_FmPort);
+
+/**
+ @Function FM_PORT_SetAllocBufCounter
+
+ @Description Calling this routine enables/disables BM pool allocate
+ buffer counters.
+ By default, counters are enabled.
+
+ May be used for Rx ports only
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] poolId BM pool id.
+ @Param[in] enable TRUE to enable, FALSE to disable.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init().
+*/
+uint32_t FM_PORT_SetAllocBufCounter(t_Handle h_FmPort,
+ uint8_t poolId, bool enable);
+
+/**
+ @Function FM_PORT_GetBmiCounters
+
+ @Description Read port's BMI stat counters and place them into
+ a designated structure of counters.
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[out] p_BmiStats counters structure
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init().
+*/
+uint32_t FM_PORT_GetBmiCounters(t_Handle h_FmPort,
+ t_FmPortBmiStats *p_BmiStats);
+
+/**
+ @Function FM_PORT_GetCounter
+
+ @Description Reads one of the FM PORT counters.
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] fmPortCounter The requested counter.
+
+ @Return Counter's current value.
+
+ @Cautions Allowed only following FM_PORT_Init().
+ Note that it is user's responsibility to call this routine only
+ for enabled counters, and there will be no indication if a
+ disabled counter is accessed.
+*/
+uint32_t FM_PORT_GetCounter(t_Handle h_FmPort,
+ e_FmPortCounters fmPortCounter);
+
+/**
+ @Function FM_PORT_ModifyCounter
+
+ @Description Sets a value to an enabled counter. Use "0" to reset the counter.
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] fmPortCounter The requested counter.
+ @Param[in] value The requested value to be written into the counter.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init().
+*/
+uint32_t FM_PORT_ModifyCounter(t_Handle h_FmPort,
+ e_FmPortCounters fmPortCounter, uint32_t value);
+
+/**
+ @Function FM_PORT_GetAllocBufCounter
+
+ @Description Reads one of the FM PORT buffer counters.
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] poolId The requested pool.
+
+ @Return Counter's current value.
+
+ @Cautions Allowed only following FM_PORT_Init().
+ Note that it is user's responsibility to call this routine only
+ for enabled counters, and there will be no indication if a
+ disabled counter is accessed.
+*/
+uint32_t FM_PORT_GetAllocBufCounter(t_Handle h_FmPort,
+ uint8_t poolId);
+
+/**
+ @Function FM_PORT_ModifyAllocBufCounter
+
+ @Description Sets a value to an enabled counter. Use "0" to reset the counter.
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] poolId The requested pool.
+ @Param[in] value The requested value to be written into the counter.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init().
+*/
+uint32_t FM_PORT_ModifyAllocBufCounter(t_Handle h_FmPort,
+ uint8_t poolId, uint32_t value);
+
+/**
+ @Function FM_PORT_AddCongestionGrps
+
+ @Description This routine effects the corresponding Tx port.
+ It should be called in order to enable pause
+ frame transmission in case of congestion in one or more
+ of the congestion groups relevant to this port.
+ Each call to this routine may add one or more congestion
+ groups to be considered relevant to this port.
+
+ May be used for Rx, or RX + OP ports only (depending on chip)
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] p_CongestionGrps A pointer to an array of congestion groups
+ id's to consider.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init().
+*/
+uint32_t FM_PORT_AddCongestionGrps(t_Handle h_FmPort,
+ t_FmPortCongestionGrps *p_CongestionGrps);
+
+/**
+ @Function FM_PORT_RemoveCongestionGrps
+
+ @Description This routine effects the corresponding Tx port. It should be
+ called when congestion groups were
+ defined for this port and are no longer relevant, or pause
+ frames transmitting is not required on their behalf.
+ Each call to this routine may remove one or more congestion
+ groups to be considered relevant to this port.
+
+ May be used for Rx, or RX + OP ports only (depending on chip)
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] p_CongestionGrps A pointer to an array of congestion groups
+ id's to consider.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init().
+*/
+uint32_t FM_PORT_RemoveCongestionGrps(t_Handle h_FmPort,
+ t_FmPortCongestionGrps *p_CongestionGrps);
+
+/**
+ @Function FM_PORT_IsStalled
+
+ @Description A routine for checking whether the specified port is stalled.
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+
+ @Return TRUE if port is stalled, FALSE otherwize
+
+ @Cautions Allowed only following FM_PORT_Init().
+*/
+bool FM_PORT_IsStalled(t_Handle h_FmPort);
+
+/**
+ @Function FM_PORT_ReleaseStalled
+
+ @Description This routine may be called in case the port was stalled and may
+ now be released.
+ Note that this routine is available only on older FMan revisions
+ (FMan v2, DPAA v1.0 only).
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init().
+*/
+uint32_t FM_PORT_ReleaseStalled(t_Handle h_FmPort);
+
+/**
+ @Function FM_PORT_SetRxL4ChecksumVerify
+
+ @Description This routine is relevant for Rx ports (1G and 10G). The routine
+ set / clear the L3 / L4 checksum verification (on RX side).
+ Note that this takes affect only if hw - parser is enabled !
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] l4Checksum boolean indicates whether to do L3/L4 checksum
+ on frames or not.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init().
+*/
+uint32_t FM_PORT_SetRxL4ChecksumVerify(t_Handle h_FmPort,
+ bool l4Checksum);
+
+/**
+ @Function FM_PORT_SetErrorsRoute
+
+ @Description Errors selected for this routine will cause a frame with that error
+ to be enqueued to error queue.
+ Errors not selected for this routine will cause a frame with that error
+ to be enqueued to the one of the other port queues.
+ By default all errors are defined to be enqueued to error queue.
+ Errors that were configured to be discarded(at initialization)
+ may not be selected here.
+
+ May be used for Rx and OP ports only
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] errs A list of errors to enqueue to error queue
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
+*/
+uint32_t FM_PORT_SetErrorsRoute(t_Handle h_FmPort,
+ fmPortFrameErrSelect_t errs);
+
+/**
+ @Function FM_PORT_SetIMExceptions
+
+ @Description Calling this routine enables/disables FM PORT interrupts.
+
+ @Param[in] h_FmPort FM PORT module descriptor.
+ @Param[in] exception The exception to be selected.
+ @Param[in] enable TRUE to enable interrupt, FALSE to mask it.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init().
+ This routine should NOT be called from guest-partition
+ (i.e. guestId != NCSW_MASTER_ID)
+*/
+uint32_t FM_PORT_SetIMExceptions(t_Handle h_FmPort,
+ e_FmPortExceptions exception, bool enable);
+
+/*
+ @Function FM_PORT_SetPerformanceCounters
+
+ @Description Calling this routine enables/disables port's performance counters.
+ By default, counters are enabled.
+
+ May be used for all port types
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] enable TRUE to enable, FALSE to disable.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init().
+*/
+uint32_t FM_PORT_SetPerformanceCounters(t_Handle h_FmPort,
+ bool enable);
+
+/*
+ @Function FM_PORT_SetPerformanceCountersParams
+
+ @Description Calling this routine defines port's performance
+ counters parameters.
+
+ May be used for all port types
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] p_FmPortPerformanceCnt A pointer to a structure of performance
+ counters parameters.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init().
+*/
+uint32_t FM_PORT_SetPerformanceCountersParams(t_Handle h_FmPort,
+ t_FmPortPerformanceCnt *p_FmPortPerformanceCnt);
+
+/**
+ @Group FM_PORT_pcd_runtime_control_grp FM Port PCD Runtime Control Unit
+
+ @Description FM Port PCD Runtime control unit API functions, definitions and enums.
+
+ @Function FM_PORT_SetPCD
+
+ @Description Calling this routine defines the port's PCD configuration.
+ It changes it from its default configuration which is PCD
+ disabled (BMI to BMI) and configures it according to the passed
+ parameters.
+
+ May be used for Rx and OP ports only
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] p_FmPortPcd A Structure of parameters defining the port's PCD
+ configuration.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init().
+*/
+uint32_t FM_PORT_SetPCD(t_Handle h_FmPort,
+ ioc_fm_port_pcd_params_t *p_FmPortPcd);
+
+/**
+ @Function FM_PORT_DeletePCD
+
+ @Description Calling this routine releases the port's PCD configuration.
+ The port returns to its default configuration which is PCD
+ disabled (BMI to BMI) and all PCD configuration is removed.
+
+ May be used for Rx and OP ports which are
+ in PCD mode only
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init().
+*/
+uint32_t FM_PORT_DeletePCD(t_Handle h_FmPort);
+
+/**
+ @Function FM_PORT_AttachPCD
+
+ @Description This routine may be called after FM_PORT_DetachPCD was called,
+ to return to the originally configured PCD support flow.
+ The couple of routines are used to allow PCD configuration changes
+ that demand that PCD will not be used while changes take place.
+
+ May be used for Rx and OP ports which are
+ in PCD mode only
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init().
+*/
+uint32_t FM_PORT_AttachPCD(t_Handle h_FmPort);
+
+/**
+ @Function FM_PORT_DetachPCD
+
+ @Description Calling this routine detaches the port from its PCD functionality.
+ The port returns to its default flow which is BMI to BMI.
+
+ May be used for Rx and OP ports which are
+ in PCD mode only
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_AttachPCD().
+*/
+uint32_t FM_PORT_DetachPCD(t_Handle h_FmPort);
+
+/**
+ @Function FM_PORT_PcdPlcrAllocProfiles
+
+ @Description This routine may be called only for ports that use the Policer in
+ order to allocate private policer profiles.
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] numOfProfiles The number of required policer profiles
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init() and FM_PCD_Init(),
+ and before FM_PORT_SetPCD().
+*/
+uint32_t FM_PORT_PcdPlcrAllocProfiles(t_Handle h_FmPort,
+ uint16_t numOfProfiles);
+
+/**
+ @Function FM_PORT_PcdPlcrFreeProfiles
+
+ @Description This routine should be called for freeing private policer profiles.
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init() and FM_PCD_Init(),
+ and before FM_PORT_SetPCD().
+*/
+uint32_t FM_PORT_PcdPlcrFreeProfiles(t_Handle h_FmPort);
+
+/**
+ @Function FM_PORT_PcdKgModifyInitialScheme
+
+ @Description This routine may be called only for ports that use the keygen in
+ order to change the initial scheme frame should be routed to.
+ The change may be of a scheme id(in case of direct mode),
+ from direct to indirect, or from indirect to direct - specifying the scheme id.
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] p_FmPcdKgScheme A structure of parameters for defining whether
+ a scheme is direct / indirect, and if direct - scheme id.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init() and FM_PORT_SetPCD().
+*/
+uint32_t FM_PORT_PcdKgModifyInitialScheme(t_Handle h_FmPort,
+ ioc_fm_pcd_kg_scheme_select_t *p_FmPcdKgScheme);
+
+/**
+ @Function FM_PORT_PcdPlcrModifyInitialProfile
+
+ @Description This routine may be called for ports with flows
+ e_FM_PORT_PCD_SUPPORT_PLCR_ONLY or e_FM_PORT_PCD_SUPPORT_PRS_AND_PLCR
+ only, to change the initial Policer profile frame should be
+ routed to. The change may be of a profile and / or absolute / direct
+ mode selection.
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] h_Profile Policer profile handle
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init() and FM_PORT_SetPCD().
+*/
+uint32_t FM_PORT_PcdPlcrModifyInitialProfile(t_Handle h_FmPort,
+ t_Handle h_Profile);
+
+/**
+ @Function FM_PORT_PcdCcModifyTree
+
+ @Description This routine may be called for ports that use coarse classification tree
+if the user wishes to replace the tree. The routine may not be called while port
+receives packets using the PCD functionalities, therefor port must be first detached
+from the PCD, only than the routine may be called, and than port be attached to PCD again.
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] h_CcTree A CC tree that was already built. The tree id as returned from
+ the BuildTree routine.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init(), FM_PORT_SetPCD() and FM_PORT_DetachPCD()
+*/
+uint32_t FM_PORT_PcdCcModifyTree(t_Handle h_FmPort, t_Handle h_CcTree);
+
+/**
+ @Function FM_PORT_PcdKgBindSchemes
+
+ @Description These routines may be called for adding more schemes for the
+ port to be bound to. The selected schemes are not added,
+ just this specific port starts using them.
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] p_PortScheme A structure defining the list of schemes to be added.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init() and FM_PORT_SetPCD().
+*/
+uint32_t FM_PORT_PcdKgBindSchemes(t_Handle h_FmPort,
+ ioc_fm_pcd_port_schemes_params_t *p_PortScheme);
+
+/**
+ @Function FM_PORT_PcdKgUnbindSchemes
+
+ @Description These routines may be called for adding more schemes for the
+ port to be bound to. The selected schemes are not removed or invalidated,
+ just this specific port stops using them.
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] p_PortScheme A structure defining the list of schemes to be added.
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init() and FM_PORT_SetPCD().
+*/
+uint32_t FM_PORT_PcdKgUnbindSchemes(t_Handle h_FmPort,
+ ioc_fm_pcd_port_schemes_params_t *p_PortScheme);
+
+/**
+ @Function FM_PORT_GetIPv4OptionsCount
+
+ @Description TODO
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[out] p_Ipv4OptionsCount will hold the counter value
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init()
+*/
+uint32_t FM_PORT_GetIPv4OptionsCount(t_Handle h_FmPort,
+ uint32_t *p_Ipv4OptionsCount);
+
+/** @} */ /* end of FM_PORT_pcd_runtime_control_grp group */
+/** @} */ /* end of FM_PORT_runtime_control_grp group */
+
+/**
+ @Group FM_PORT_runtime_data_grp FM Port Runtime Data-path Unit
+
+ @Description FM Port Runtime data unit API functions, definitions and enums.
+ This API is valid only if working in Independent-Mode.
+
+ @{
+*/
+
+/**
+ @Function FM_PORT_ImTx
+
+ @Description Tx function, called to transmit a data buffer on the port.
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+ @Param[in] p_Data A pointer to an LCP data buffer.
+ @Param[in] length Size of data for transmission.
+ @Param[in] lastBuffer Buffer position - TRUE for the last buffer
+ of a frame, including a single buffer frame
+ @Param[in] h_BufContext A handle of the user acossiated with this buffer
+
+ @Return E_OK on success; Error code otherwise.
+
+ @Cautions Allowed only following FM_PORT_Init().
+ NOTE - This routine can be used only when working in
+ Independent-Mode mode.
+*/
+uint32_t FM_PORT_ImTx(t_Handle h_FmPort,
+ uint8_t *p_Data,
+ uint16_t length,
+ bool lastBuffer,
+ t_Handle h_BufContext);
+
+/**
+ @Function FM_PORT_ImTxConf
+
+ @Description Tx port confirmation routine, optional, may be called to verify
+ transmission of all frames. The procedure performed by this
+ routine will be performed automatically on next buffer transmission,
+ but if desired, calling this routine will invoke this action on
+ demand.
+
+ @Param[in] h_FmPort A handle to a FM Port module.
+
+ @Cautions Allowed only following FM_PORT_Init().
+ NOTE - This routine can be used only when working in
+ Independent-Mode mode.
+*/
+void FM_PORT_ImTxConf(t_Handle h_FmPort);
+
+uint32_t FM_PORT_ImRx(t_Handle h_FmPort);
+
+/** @} */ /* end of FM_PORT_runtime_data_grp group */
+/** @} */ /* end of FM_PORT_grp group */
+/** @} */ /* end of FM_grp group */
+#endif /* __FM_PORT_EXT_H */
new file mode 100644
@@ -0,0 +1,153 @@
+/* SPDX-License-Identifier: (BSD-3-Clause OR GPL-2.0)
+ * Copyright 2008-2012 Freescale Semiconductor Inc.
+ * Copyright 2017-2020 NXP
+ */
+
+#ifndef __NCSW_EXT_H
+#define __NCSW_EXT_H
+
+#include <stdint.h>
+
+#define PTR_TO_UINT(_ptr) ((uintptr_t)(_ptr))
+#define UINT_TO_PTR(_val) ((void *)(uintptr_t)(_val))
+
+/* physAddress_t should be uintptr_t */
+typedef uint64_t physAddress_t;
+
+/**
+ @Description Possible RxStore callback responses.
+*/
+typedef enum e_RxStoreResponse {
+ e_RX_STORE_RESPONSE_PAUSE
+ /**< Pause invoking callback with received data;
+ in polling mode, start again invoking callback
+ only next time user invokes the receive routine;
+ in interrupt mode, start again invoking callback
+ only next time a receive event triggers an interrupt;
+ in all cases, received data that are pending are not
+ lost, rather, their processing is temporarily deferred;
+ in all cases, received data are processed in the order
+ in which they were received. */
+ , e_RX_STORE_RESPONSE_CONTINUE
+ /**< Continue invoking callback with received data. */
+} e_RxStoreResponse;
+
+
+/**
+ @Description General Handle
+*/
+typedef void *t_Handle; /**< handle, used as object's descriptor */
+
+/* @} */
+
+/**
+ @Function t_GetBufFunction
+
+ @Description User callback function called by driver to get data buffer.
+
+ User provides this function. Driver invokes it.
+
+ @Param[in] h_BufferPool - A handle to buffer pool manager
+ @Param[out] p_BufContextHandle - Returns the user's private context that
+ should be associated with the buffer
+
+ @Return Pointer to data buffer, NULL if error
+ */
+typedef uint8_t * (t_GetBufFunction)(t_Handle h_BufferPool,
+ t_Handle *p_BufContextHandle);
+
+/**
+ @Function t_PutBufFunction
+
+ @Description User callback function called by driver to return data buffer.
+
+ User provides this function. Driver invokes it.
+
+ @Param[in] h_BufferPool - A handle to buffer pool manager
+ @Param[in] p_Buffer - A pointer to buffer to return
+ @Param[in] h_BufContext - The user's private context associated with
+ the returned buffer
+
+ @Return E_OK on success; Error code otherwise
+ */
+typedef uint32_t (t_PutBufFunction)(t_Handle h_BufferPool,
+ uint8_t *p_Buffer,
+ t_Handle h_BufContext);
+
+/**
+ @Function t_PhysToVirt
+
+ @Description Translates a physical address to the matching virtual address.
+
+ @Param[in] addr - The physical address to translate.
+
+ @Return Virtual address.
+*/
+typedef void *t_PhysToVirt(physAddress_t addr);
+
+/**
+ @Function t_VirtToPhys
+
+ @Description Translates a virtual address to the matching physical address.
+
+ @Param[in] addr - The virtual address to translate.
+
+ @Return Physical address.
+*/
+typedef physAddress_t t_VirtToPhys(void *addr);
+
+/**
+ @Description Buffer Pool Information Structure.
+*/
+typedef struct t_BufferPoolInfo {
+ t_Handle h_BufferPool; /**< A handle to the buffer pool mgr */
+ t_GetBufFunction *f_GetBuf; /**< User callback to get a free buffer */
+ t_PutBufFunction *f_PutBuf; /**< User callback to return a buffer */
+ uint16_t bufferSize; /**< Buffer size (in bytes) */
+
+ t_PhysToVirt *f_PhysToVirt; /**< User callback to translate pool buffers
+ physical addresses to virtual addresses */
+ t_VirtToPhys *f_VirtToPhys; /**< User callback to translate pool buffers
+ virtual addresses to physical addresses */
+} t_BufferPoolInfo;
+
+/**
+ @Description User callback function called by driver with receive data.
+
+ User provides this function. Driver invokes it.
+
+ @Param[in] h_App - Application's handle, as was provided to the
+ driver by the user
+ @Param[in] queueId - Receive queue ID
+ @Param[in] p_Data - Pointer to the buffer with received data
+ @Param[in] h_BufContext - The user's private context associated with
+ the given data buffer
+ @Param[in] length - Length of received data
+ @Param[in] status - Receive status and errors
+ @Param[in] position - Position of buffer in frame
+ @Param[in] flags - Driver-dependent information
+
+ @Retval e_RX_STORE_RESPONSE_CONTINUE - order the driver to continue Rx
+ operation for all ready data.
+ @Retval e_RX_STORE_RESPONSE_PAUSE- order the driver to stop Rx ops.
+ */
+typedef e_RxStoreResponse(t_RxStoreFunction)(t_Handle h_App,
+ uint32_t queueId,
+ uint8_t *p_Data,
+ t_Handle h_BufContext,
+ uint32_t length,
+ uint16_t status,
+ uint8_t position,
+ uint32_t flags);
+
+typedef struct t_Device {
+ uintptr_t id; /**< the device id */
+ int fd; /**< the device file descriptor */
+ t_Handle h_UserPriv;
+ uint32_t owners;
+} t_Device;
+
+t_Handle CreateDevice(t_Handle h_UserPriv, t_Handle h_DevId);
+t_Handle GetDeviceId(t_Handle h_Dev);
+
+#endif /* __NCSW_EXT_H */
new file mode 100644
@@ -0,0 +1,383 @@
+/* SPDX-License-Identifier: (BSD-3-Clause OR GPL-2.0)
+ * Copyright 2008-2012 Freescale Semiconductor Inc.
+ * Copyright 2017-2019 NXP
+ */
+
+#ifndef __NET_EXT_H
+#define __NET_EXT_H
+
+#include "ncsw_ext.h"
+
+/**
+ @Description This file contains common and general netcomm headers definitions.
+*/
+
+typedef uint8_t ioc_header_field_ppp_t;
+
+#define IOC_NET_HF_PPP_PID (1)
+#define IOC_NET_HF_PPP_COMPRESSED (IOC_NET_HF_PPP_PID << 1)
+#define IOC_NET_HF_PPP_ALL_FIELDS ((IOC_NET_HF_PPP_PID << 2) - 1)
+
+typedef uint8_t ioc_header_field_pppoe_t;
+
+#define IOC_NET_HF_PPPoE_VER (1)
+#define IOC_NET_HF_PPPoE_TYPE (IOC_NET_HF_PPPoE_VER << 1)
+#define IOC_NET_HF_PPPoE_CODE (IOC_NET_HF_PPPoE_VER << 2)
+#define IOC_NET_HF_PPPoE_SID (IOC_NET_HF_PPPoE_VER << 3)
+#define IOC_NET_HF_PPPoE_LEN (IOC_NET_HF_PPPoE_VER << 4)
+#define IOC_NET_HF_PPPoE_SESSION (IOC_NET_HF_PPPoE_VER << 5)
+#define IOC_NET_HF_PPPoE_PID (IOC_NET_HF_PPPoE_VER << 6)
+#define IOC_NET_HF_PPPoE_ALL_FIELDS ((IOC_NET_HF_PPPoE_VER << 7) - 1)
+
+#define IOC_NET_HF_PPPMUX_PID (1)
+#define IOC_NET_HF_PPPMUX_CKSUM (IOC_NET_HF_PPPMUX_PID << 1)
+#define IOC_NET_HF_PPPMUX_COMPRESSED (IOC_NET_HF_PPPMUX_PID << 2)
+#define IOC_NET_HF_PPPMUX_ALL_FIELDS ((IOC_NET_HF_PPPMUX_PID << 3) - 1)
+
+#define IOC_NET_HF_PPPMUX_SUBFRAME_PFF (1)
+#define IOC_NET_HF_PPPMUX_SUBFRAME_LXT (IOC_NET_HF_PPPMUX_SUBFRAME_PFF << 1)
+#define IOC_NET_HF_PPPMUX_SUBFRAME_LEN (IOC_NET_HF_PPPMUX_SUBFRAME_PFF << 2)
+#define IOC_NET_HF_PPPMUX_SUBFRAME_PID (IOC_NET_HF_PPPMUX_SUBFRAME_PFF << 3)
+#define IOC_NET_HF_PPPMUX_SUBFRAME_USE_PID (IOC_NET_HF_PPPMUX_SUBFRAME_PFF << 4)
+#define IOC_NET_HF_PPPMUX_SUBFRAME_ALL_FIELDS ((IOC_NET_HF_PPPMUX_SUBFRAME_PFF << 5) - 1)
+
+typedef uint8_t ioc_header_field_eth_t;
+
+#define IOC_NET_HF_ETH_DA (1)
+#define IOC_NET_HF_ETH_SA (IOC_NET_HF_ETH_DA << 1)
+#define IOC_NET_HF_ETH_LENGTH (IOC_NET_HF_ETH_DA << 2)
+#define IOC_NET_HF_ETH_TYPE (IOC_NET_HF_ETH_DA << 3)
+#define IOC_NET_HF_ETH_FINAL_CKSUM (IOC_NET_HF_ETH_DA << 4)
+#define IOC_NET_HF_ETH_PADDING (IOC_NET_HF_ETH_DA << 5)
+#define IOC_NET_HF_ETH_ALL_FIELDS ((IOC_NET_HF_ETH_DA << 6) - 1)
+
+#define IOC_NET_HF_ETH_ADDR_SIZE 6
+
+typedef uint16_t ioc_header_field_ip_t;
+
+#define IOC_NET_HF_IP_VER (1)
+#define IOC_NET_HF_IP_DSCP (IOC_NET_HF_IP_VER << 2)
+#define IOC_NET_HF_IP_ECN (IOC_NET_HF_IP_VER << 3)
+#define IOC_NET_HF_IP_PROTO (IOC_NET_HF_IP_VER << 4)
+
+#define IOC_NET_HF_IP_PROTO_SIZE 1
+
+typedef uint16_t ioc_header_field_ipv4_t;
+
+#define IOC_NET_HF_IPv4_VER (1)
+#define IOC_NET_HF_IPv4_HDR_LEN (IOC_NET_HF_IPv4_VER << 1)
+#define IOC_NET_HF_IPv4_TOS (IOC_NET_HF_IPv4_VER << 2)
+#define IOC_NET_HF_IPv4_TOTAL_LEN (IOC_NET_HF_IPv4_VER << 3)
+#define IOC_NET_HF_IPv4_ID (IOC_NET_HF_IPv4_VER << 4)
+#define IOC_NET_HF_IPv4_FLAG_D (IOC_NET_HF_IPv4_VER << 5)
+#define IOC_NET_HF_IPv4_FLAG_M (IOC_NET_HF_IPv4_VER << 6)
+#define IOC_NET_HF_IPv4_OFFSET (IOC_NET_HF_IPv4_VER << 7)
+#define IOC_NET_HF_IPv4_TTL (IOC_NET_HF_IPv4_VER << 8)
+#define IOC_NET_HF_IPv4_PROTO (IOC_NET_HF_IPv4_VER << 9)
+#define IOC_NET_HF_IPv4_CKSUM (IOC_NET_HF_IPv4_VER << 10)
+#define IOC_NET_HF_IPv4_SRC_IP (IOC_NET_HF_IPv4_VER << 11)
+#define IOC_NET_HF_IPv4_DST_IP (IOC_NET_HF_IPv4_VER << 12)
+#define IOC_NET_HF_IPv4_OPTS (IOC_NET_HF_IPv4_VER << 13)
+#define IOC_NET_HF_IPv4_OPTS_COUNT (IOC_NET_HF_IPv4_VER << 14)
+#define IOC_NET_HF_IPv4_ALL_FIELDS ((IOC_NET_HF_IPv4_VER << 15) - 1)
+
+#define IOC_NET_HF_IPv4_ADDR_SIZE 4
+#define IOC_NET_HF_IPv4_PROTO_SIZE 1
+
+typedef uint8_t ioc_header_field_ipv6_t;
+
+#define IOC_NET_HF_IPv6_VER (1)
+#define IOC_NET_HF_IPv6_TC (IOC_NET_HF_IPv6_VER << 1)
+#define IOC_NET_HF_IPv6_SRC_IP (IOC_NET_HF_IPv6_VER << 2)
+#define IOC_NET_HF_IPv6_DST_IP (IOC_NET_HF_IPv6_VER << 3)
+#define IOC_NET_HF_IPv6_NEXT_HDR (IOC_NET_HF_IPv6_VER << 4)
+#define IOC_NET_HF_IPv6_FL (IOC_NET_HF_IPv6_VER << 5)
+#define IOC_NET_HF_IPv6_HOP_LIMIT (IOC_NET_HF_IPv6_VER << 6)
+#define IOC_NET_HF_IPv6_ALL_FIELDS ((IOC_NET_HF_IPv6_VER << 7) - 1)
+
+#define IOC_NET_HF_IPv6_ADDR_SIZE 16
+#define IOC_NET_HF_IPv6_NEXT_HDR_SIZE 1
+
+#define IOC_NET_HF_ICMP_TYPE (1)
+#define IOC_NET_HF_ICMP_CODE (IOC_NET_HF_ICMP_TYPE << 1)
+#define IOC_NET_HF_ICMP_CKSUM (IOC_NET_HF_ICMP_TYPE << 2)
+#define IOC_NET_HF_ICMP_ID (IOC_NET_HF_ICMP_TYPE << 3)
+#define IOC_NET_HF_ICMP_SQ_NUM (IOC_NET_HF_ICMP_TYPE << 4)
+#define IOC_NET_HF_ICMP_ALL_FIELDS ((IOC_NET_HF_ICMP_TYPE << 5) - 1)
+
+#define IOC_NET_HF_ICMP_CODE_SIZE 1
+#define IOC_NET_HF_ICMP_TYPE_SIZE 1
+
+#define IOC_NET_HF_IGMP_VERSION (1)
+#define IOC_NET_HF_IGMP_TYPE (IOC_NET_HF_IGMP_VERSION << 1)
+#define IOC_NET_HF_IGMP_CKSUM (IOC_NET_HF_IGMP_VERSION << 2)
+#define IOC_NET_HF_IGMP_DATA (IOC_NET_HF_IGMP_VERSION << 3)
+#define IOC_NET_HF_IGMP_ALL_FIELDS ((IOC_NET_HF_IGMP_VERSION << 4) - 1)
+
+typedef uint16_t ioc_header_field_tcp_t;
+
+#define IOC_NET_HF_TCP_PORT_SRC (1)
+#define IOC_NET_HF_TCP_PORT_DST (IOC_NET_HF_TCP_PORT_SRC << 1)
+#define IOC_NET_HF_TCP_SEQ (IOC_NET_HF_TCP_PORT_SRC << 2)
+#define IOC_NET_HF_TCP_ACK (IOC_NET_HF_TCP_PORT_SRC << 3)
+#define IOC_NET_HF_TCP_OFFSET (IOC_NET_HF_TCP_PORT_SRC << 4)
+#define IOC_NET_HF_TCP_FLAGS (IOC_NET_HF_TCP_PORT_SRC << 5)
+#define IOC_NET_HF_TCP_WINDOW (IOC_NET_HF_TCP_PORT_SRC << 6)
+#define IOC_NET_HF_TCP_CKSUM (IOC_NET_HF_TCP_PORT_SRC << 7)
+#define IOC_NET_HF_TCP_URGPTR (IOC_NET_HF_TCP_PORT_SRC << 8)
+#define IOC_NET_HF_TCP_OPTS (IOC_NET_HF_TCP_PORT_SRC << 9)
+#define IOC_NET_HF_TCP_OPTS_COUNT (IOC_NET_HF_TCP_PORT_SRC << 10)
+#define IOC_NET_HF_TCP_ALL_FIELDS ((IOC_NET_HF_TCP_PORT_SRC << 11) - 1)
+
+#define IOC_NET_HF_TCP_PORT_SIZE 2
+
+typedef uint8_t ioc_header_field_sctp_t;
+
+#define IOC_NET_HF_SCTP_PORT_SRC (1)
+#define IOC_NET_HF_SCTP_PORT_DST (IOC_NET_HF_SCTP_PORT_SRC << 1)
+#define IOC_NET_HF_SCTP_VER_TAG (IOC_NET_HF_SCTP_PORT_SRC << 2)
+#define IOC_NET_HF_SCTP_CKSUM (IOC_NET_HF_SCTP_PORT_SRC << 3)
+#define IOC_NET_HF_SCTP_ALL_FIELDS ((IOC_NET_HF_SCTP_PORT_SRC << 4) - 1)
+
+#define IOC_NET_HF_SCTP_PORT_SIZE 2
+
+typedef uint8_t ioc_header_field_dccp_t;
+
+#define IOC_NET_HF_DCCP_PORT_SRC (1)
+#define IOC_NET_HF_DCCP_PORT_DST (IOC_NET_HF_DCCP_PORT_SRC << 1)
+#define IOC_NET_HF_DCCP_ALL_FIELDS ((IOC_NET_HF_DCCP_PORT_SRC << 2) - 1)
+
+#define IOC_NET_HF_DCCP_PORT_SIZE 2
+
+typedef uint8_t ioc_header_field_udp_t;
+
+#define IOC_NET_HF_UDP_PORT_SRC (1)
+#define IOC_NET_HF_UDP_PORT_DST (IOC_NET_HF_UDP_PORT_SRC << 1)
+#define IOC_NET_HF_UDP_LEN (IOC_NET_HF_UDP_PORT_SRC << 2)
+#define IOC_NET_HF_UDP_CKSUM (IOC_NET_HF_UDP_PORT_SRC << 3)
+#define IOC_NET_HF_UDP_ALL_FIELDS ((IOC_NET_HF_UDP_PORT_SRC << 4) - 1)
+
+#define IOC_NET_HF_UDP_PORT_SIZE 2
+
+typedef uint8_t ioc_header_field_udp_lite_t;
+
+#define IOC_NET_HF_UDP_LITE_PORT_SRC (1)
+#define IOC_NET_HF_UDP_LITE_PORT_DST (IOC_NET_HF_UDP_LITE_PORT_SRC << 1)
+#define IOC_NET_HF_UDP_LITE_ALL_FIELDS ((IOC_NET_HF_UDP_LITE_PORT_SRC << 2) - 1)
+
+#define IOC_NET_HF_UDP_LITE_PORT_SIZE 2
+
+typedef uint8_t ioc_header_field_udp_encap_esp_t;
+
+#define IOC_NET_HF_UDP_ENCAP_ESP_PORT_SRC (1)
+#define IOC_NET_HF_UDP_ENCAP_ESP_PORT_DST (IOC_NET_HF_UDP_ENCAP_ESP_PORT_SRC << 1)
+#define IOC_NET_HF_UDP_ENCAP_ESP_LEN (IOC_NET_HF_UDP_ENCAP_ESP_PORT_SRC << 2)
+#define IOC_NET_HF_UDP_ENCAP_ESP_CKSUM (IOC_NET_HF_UDP_ENCAP_ESP_PORT_SRC << 3)
+#define IOC_NET_HF_UDP_ENCAP_ESP_SPI (IOC_NET_HF_UDP_ENCAP_ESP_PORT_SRC << 4)
+#define IOC_NET_HF_UDP_ENCAP_ESP_SEQUENCE_NUM (IOC_NET_HF_UDP_ENCAP_ESP_PORT_SRC << 5)
+#define IOC_NET_HF_UDP_ENCAP_ESP_ALL_FIELDS ((IOC_NET_HF_UDP_ENCAP_ESP_PORT_SRC << 6) - 1)
+
+#define IOC_NET_HF_UDP_ENCAP_ESP_PORT_SIZE 2
+#define IOC_NET_HF_UDP_ENCAP_ESP_SPI_SIZE 4
+
+#define IOC_NET_HF_IPHC_CID (1)
+#define IOC_NET_HF_IPHC_CID_TYPE (IOC_NET_HF_IPHC_CID << 1)
+#define IOC_NET_HF_IPHC_HCINDEX (IOC_NET_HF_IPHC_CID << 2)
+#define IOC_NET_HF_IPHC_GEN (IOC_NET_HF_IPHC_CID << 3)
+#define IOC_NET_HF_IPHC_D_BIT (IOC_NET_HF_IPHC_CID << 4)
+#define IOC_NET_HF_IPHC_ALL_FIELDS ((IOC_NET_HF_IPHC_CID << 5) - 1)
+
+#define IOC_NET_HF_SCTP_CHUNK_DATA_TYPE (1)
+#define IOC_NET_HF_SCTP_CHUNK_DATA_FLAGS (IOC_NET_HF_SCTP_CHUNK_DATA_TYPE << 1)
+#define IOC_NET_HF_SCTP_CHUNK_DATA_LENGTH (IOC_NET_HF_SCTP_CHUNK_DATA_TYPE << 2)
+#define IOC_NET_HF_SCTP_CHUNK_DATA_TSN (IOC_NET_HF_SCTP_CHUNK_DATA_TYPE << 3)
+#define IOC_NET_HF_SCTP_CHUNK_DATA_STREAM_ID (IOC_NET_HF_SCTP_CHUNK_DATA_TYPE << 4)
+#define IOC_NET_HF_SCTP_CHUNK_DATA_STREAM_SQN (IOC_NET_HF_SCTP_CHUNK_DATA_TYPE << 5)
+#define IOC_NET_HF_SCTP_CHUNK_DATA_PAYLOAD_PID (IOC_NET_HF_SCTP_CHUNK_DATA_TYPE << 6)
+#define IOC_NET_HF_SCTP_CHUNK_DATA_UNORDERED (IOC_NET_HF_SCTP_CHUNK_DATA_TYPE << 7)
+#define IOC_NET_HF_SCTP_CHUNK_DATA_BEGGINING (IOC_NET_HF_SCTP_CHUNK_DATA_TYPE << 8)
+#define IOC_NET_HF_SCTP_CHUNK_DATA_END (IOC_NET_HF_SCTP_CHUNK_DATA_TYPE << 9)
+#define IOC_NET_HF_SCTP_CHUNK_DATA_ALL_FIELDS ((IOC_NET_HF_SCTP_CHUNK_DATA_TYPE << 10) - 1)
+
+#define IOC_NET_HF_L2TPv2_TYPE_BIT (1)
+#define IOC_NET_HF_L2TPv2_LENGTH_BIT (IOC_NET_HF_L2TPv2_TYPE_BIT << 1)
+#define IOC_NET_HF_L2TPv2_SEQUENCE_BIT (IOC_NET_HF_L2TPv2_TYPE_BIT << 2)
+#define IOC_NET_HF_L2TPv2_OFFSET_BIT (IOC_NET_HF_L2TPv2_TYPE_BIT << 3)
+#define IOC_NET_HF_L2TPv2_PRIORITY_BIT (IOC_NET_HF_L2TPv2_TYPE_BIT << 4)
+#define IOC_NET_HF_L2TPv2_VERSION (IOC_NET_HF_L2TPv2_TYPE_BIT << 5)
+#define IOC_NET_HF_L2TPv2_LEN (IOC_NET_HF_L2TPv2_TYPE_BIT << 6)
+#define IOC_NET_HF_L2TPv2_TUNNEL_ID (IOC_NET_HF_L2TPv2_TYPE_BIT << 7)
+#define IOC_NET_HF_L2TPv2_SESSION_ID (IOC_NET_HF_L2TPv2_TYPE_BIT << 8)
+#define IOC_NET_HF_L2TPv2_NS (IOC_NET_HF_L2TPv2_TYPE_BIT << 9)
+#define IOC_NET_HF_L2TPv2_NR (IOC_NET_HF_L2TPv2_TYPE_BIT << 10)
+#define IOC_NET_HF_L2TPv2_OFFSET_SIZE (IOC_NET_HF_L2TPv2_TYPE_BIT << 11)
+#define IOC_NET_HF_L2TPv2_FIRST_BYTE (IOC_NET_HF_L2TPv2_TYPE_BIT << 12)
+#define IOC_NET_HF_L2TPv2_ALL_FIELDS ((IOC_NET_HF_L2TPv2_TYPE_BIT << 13) - 1)
+
+#define IOC_NET_HF_L2TPv3_CTRL_TYPE_BIT (1)
+#define IOC_NET_HF_L2TPv3_CTRL_LENGTH_BIT (IOC_NET_HF_L2TPv3_CTRL_TYPE_BIT << 1)
+#define IOC_NET_HF_L2TPv3_CTRL_SEQUENCE_BIT (IOC_NET_HF_L2TPv3_CTRL_TYPE_BIT << 2)
+#define IOC_NET_HF_L2TPv3_CTRL_VERSION (IOC_NET_HF_L2TPv3_CTRL_TYPE_BIT << 3)
+#define IOC_NET_HF_L2TPv3_CTRL_LENGTH (IOC_NET_HF_L2TPv3_CTRL_TYPE_BIT << 4)
+#define IOC_NET_HF_L2TPv3_CTRL_CONTROL (IOC_NET_HF_L2TPv3_CTRL_TYPE_BIT << 5)
+#define IOC_NET_HF_L2TPv3_CTRL_SENT (IOC_NET_HF_L2TPv3_CTRL_TYPE_BIT << 6)
+#define IOC_NET_HF_L2TPv3_CTRL_RECV (IOC_NET_HF_L2TPv3_CTRL_TYPE_BIT << 7)
+#define IOC_NET_HF_L2TPv3_CTRL_FIRST_BYTE (IOC_NET_HF_L2TPv3_CTRL_TYPE_BIT << 8)
+#define IOC_NET_HF_L2TPv3_CTRL_ALL_FIELDS ((IOC_NET_HF_L2TPv3_CTRL_TYPE_BIT << 9) - 1)
+
+#define IOC_NET_HF_L2TPv3_SESS_TYPE_BIT (1)
+#define IOC_NET_HF_L2TPv3_SESS_VERSION (IOC_NET_HF_L2TPv3_SESS_TYPE_BIT << 1)
+#define IOC_NET_HF_L2TPv3_SESS_ID (IOC_NET_HF_L2TPv3_SESS_TYPE_BIT << 2)
+#define IOC_NET_HF_L2TPv3_SESS_COOKIE (IOC_NET_HF_L2TPv3_SESS_TYPE_BIT << 3)
+#define IOC_NET_HF_L2TPv3_SESS_ALL_FIELDS ((IOC_NET_HF_L2TPv3_SESS_TYPE_BIT << 4) - 1)
+
+typedef uint8_t ioc_header_field_vlan_t;
+
+#define IOC_NET_HF_VLAN_VPRI (1)
+#define IOC_NET_HF_VLAN_CFI (IOC_NET_HF_VLAN_VPRI << 1)
+#define IOC_NET_HF_VLAN_VID (IOC_NET_HF_VLAN_VPRI << 2)
+#define IOC_NET_HF_VLAN_LENGTH (IOC_NET_HF_VLAN_VPRI << 3)
+#define IOC_NET_HF_VLAN_TYPE (IOC_NET_HF_VLAN_VPRI << 4)
+#define IOC_NET_HF_VLAN_ALL_FIELDS ((IOC_NET_HF_VLAN_VPRI << 5) - 1)
+
+#define IOC_NET_HF_VLAN_TCI (IOC_NET_HF_VLAN_VPRI | \
+ IOC_NET_HF_VLAN_CFI | \
+ IOC_NET_HF_VLAN_VID)
+
+typedef uint8_t ioc_header_field_llc_t;
+
+#define IOC_NET_HF_LLC_DSAP (1)
+#define IOC_NET_HF_LLC_SSAP (IOC_NET_HF_LLC_DSAP << 1)
+#define IOC_NET_HF_LLC_CTRL (IOC_NET_HF_LLC_DSAP << 2)
+#define IOC_NET_HF_LLC_ALL_FIELDS ((IOC_NET_HF_LLC_DSAP << 3) - 1)
+
+#define IOC_NET_HF_NLPID_NLPID (1)
+#define IOC_NET_HF_NLPID_ALL_FIELDS ((IOC_NET_HF_NLPID_NLPID << 1) - 1)
+
+typedef uint8_t ioc_header_field_snap_t;
+
+#define IOC_NET_HF_SNAP_OUI (1)
+#define IOC_NET_HF_SNAP_PID (IOC_NET_HF_SNAP_OUI << 1)
+#define IOC_NET_HF_SNAP_ALL_FIELDS ((IOC_NET_HF_SNAP_OUI << 2) - 1)
+
+typedef uint8_t ioc_header_field_llc_snap_t;
+
+#define IOC_NET_HF_LLC_SNAP_TYPE (1)
+#define IOC_NET_HF_LLC_SNAP_ALL_FIELDS ((IOC_NET_HF_LLC_SNAP_TYPE << 1) - 1)
+
+#define IOC_NET_HF_ARP_HTYPE (1)
+#define IOC_NET_HF_ARP_PTYPE (IOC_NET_HF_ARP_HTYPE << 1)
+#define IOC_NET_HF_ARP_HLEN (IOC_NET_HF_ARP_HTYPE << 2)
+#define IOC_NET_HF_ARP_PLEN (IOC_NET_HF_ARP_HTYPE << 3)
+#define IOC_NET_HF_ARP_OPER (IOC_NET_HF_ARP_HTYPE << 4)
+#define IOC_NET_HF_ARP_SHA (IOC_NET_HF_ARP_HTYPE << 5)
+#define IOC_NET_HF_ARP_SPA (IOC_NET_HF_ARP_HTYPE << 6)
+#define IOC_NET_HF_ARP_THA (IOC_NET_HF_ARP_HTYPE << 7)
+#define IOC_NET_HF_ARP_TPA (IOC_NET_HF_ARP_HTYPE << 8)
+#define IOC_NET_HF_ARP_ALL_FIELDS ((IOC_NET_HF_ARP_HTYPE << 9) - 1)
+
+#define IOC_NET_HF_RFC2684_LLC (1)
+#define IOC_NET_HF_RFC2684_NLPID (IOC_NET_HF_RFC2684_LLC << 1)
+#define IOC_NET_HF_RFC2684_OUI (IOC_NET_HF_RFC2684_LLC << 2)
+#define IOC_NET_HF_RFC2684_PID (IOC_NET_HF_RFC2684_LLC << 3)
+#define IOC_NET_HF_RFC2684_VPN_OUI (IOC_NET_HF_RFC2684_LLC << 4)
+#define IOC_NET_HF_RFC2684_VPN_IDX (IOC_NET_HF_RFC2684_LLC << 5)
+#define IOC_NET_HF_RFC2684_ALL_FIELDS ((IOC_NET_HF_RFC2684_LLC << 6) - 1)
+
+#define IOC_NET_HF_USER_DEFINED_SRCPORT (1)
+#define IOC_NET_HF_USER_DEFINED_PCDID (IOC_NET_HF_USER_DEFINED_SRCPORT << 1)
+#define IOC_NET_HF_USER_DEFINED_ALL_FIELDS ((IOC_NET_HF_USER_DEFINED_SRCPORT << 2) - 1)
+
+#define IOC_NET_HF_PAYLOAD_BUFFER (1)
+#define IOC_NET_HF_PAYLOAD_SIZE (IOC_NET_HF_PAYLOAD_BUFFER << 1)
+#define IOC_NET_HF_MAX_FRM_SIZE (IOC_NET_HF_PAYLOAD_BUFFER << 2)
+#define IOC_NET_HF_MIN_FRM_SIZE (IOC_NET_HF_PAYLOAD_BUFFER << 3)
+#define IOC_NET_HF_PAYLOAD_TYPE (IOC_NET_HF_PAYLOAD_BUFFER << 4)
+#define IOC_NET_HF_FRAME_SIZE (IOC_NET_HF_PAYLOAD_BUFFER << 5)
+#define IOC_NET_HF_PAYLOAD_ALL_FIELDS ((IOC_NET_HF_PAYLOAD_BUFFER << 6) - 1)
+
+typedef uint8_t ioc_header_field_gre_t;
+
+#define IOC_NET_HF_GRE_TYPE (1)
+#define IOC_NET_HF_GRE_ALL_FIELDS ((IOC_NET_HF_GRE_TYPE << 1) - 1)
+
+typedef uint8_t ioc_header_field_minencap_t;
+
+#define IOC_NET_HF_MINENCAP_SRC_IP (1)
+#define IOC_NET_HF_MINENCAP_DST_IP (IOC_NET_HF_MINENCAP_SRC_IP << 1)
+#define IOC_NET_HF_MINENCAP_TYPE (IOC_NET_HF_MINENCAP_SRC_IP << 2)
+#define IOC_NET_HF_MINENCAP_ALL_FIELDS ((IOC_NET_HF_MINENCAP_SRC_IP << 3) - 1)
+
+typedef uint8_t ioc_header_field_ipsec_ah_t;
+
+#define IOC_NET_HF_IPSEC_AH_SPI (1)
+#define IOC_NET_HF_IPSEC_AH_NH (IOC_NET_HF_IPSEC_AH_SPI << 1)
+#define IOC_NET_HF_IPSEC_AH_ALL_FIELDS ((IOC_NET_HF_IPSEC_AH_SPI << 2) - 1)
+
+typedef uint8_t ioc_header_field_ipsec_esp_t;
+
+#define IOC_NET_HF_IPSEC_ESP_SPI (1)
+#define IOC_NET_HF_IPSEC_ESP_SEQUENCE_NUM (IOC_NET_HF_IPSEC_ESP_SPI << 1)
+#define IOC_NET_HF_IPSEC_ESP_ALL_FIELDS ((IOC_NET_HF_IPSEC_ESP_SPI << 2) - 1)
+
+#define IOC_NET_HF_IPSEC_ESP_SPI_SIZE 4
+
+
+typedef uint8_t ioc_header_field_mpls_t;
+
+#define IOC_NET_HF_MPLS_LABEL_STACK (1)
+#define IOC_NET_HF_MPLS_LABEL_STACK_ALL_FIELDS ((IOC_NET_HF_MPLS_LABEL_STACK << 1) - 1)
+
+typedef uint8_t ioc_header_field_macsec_t;
+
+#define IOC_NET_HF_MACSEC_SECTAG (1)
+#define IOC_NET_HF_MACSEC_ALL_FIELDS ((IOC_NET_HF_MACSEC_SECTAG << 1) - 1)
+
+typedef enum {
+ HEADER_TYPE_NONE = 0,
+ HEADER_TYPE_PAYLOAD,
+ HEADER_TYPE_ETH,
+ HEADER_TYPE_VLAN,
+ HEADER_TYPE_IPv4,
+ HEADER_TYPE_IPv6,
+ HEADER_TYPE_IP,
+ HEADER_TYPE_TCP,
+ HEADER_TYPE_UDP,
+ HEADER_TYPE_UDP_LITE,
+ HEADER_TYPE_IPHC,
+ HEADER_TYPE_SCTP,
+ HEADER_TYPE_SCTP_CHUNK_DATA,
+ HEADER_TYPE_PPPoE,
+ HEADER_TYPE_PPP,
+ HEADER_TYPE_PPPMUX,
+ HEADER_TYPE_PPPMUX_SUBFRAME,
+ HEADER_TYPE_L2TPv2,
+ HEADER_TYPE_L2TPv3_CTRL,
+ HEADER_TYPE_L2TPv3_SESS,
+ HEADER_TYPE_LLC,
+ HEADER_TYPE_LLC_SNAP,
+ HEADER_TYPE_NLPID,
+ HEADER_TYPE_SNAP,
+ HEADER_TYPE_MPLS,
+ HEADER_TYPE_IPSEC_AH,
+ HEADER_TYPE_IPSEC_ESP,
+ HEADER_TYPE_UDP_ENCAP_ESP, /* RFC 3948 */
+ HEADER_TYPE_MACSEC,
+ HEADER_TYPE_GRE,
+ HEADER_TYPE_MINENCAP,
+ HEADER_TYPE_DCCP,
+ HEADER_TYPE_ICMP,
+ HEADER_TYPE_IGMP,
+ HEADER_TYPE_ARP,
+ HEADER_TYPE_CAPWAP,
+ HEADER_TYPE_CAPWAP_DTLS,
+ HEADER_TYPE_RFC2684,
+ HEADER_TYPE_USER_DEFINED_L2,
+ HEADER_TYPE_USER_DEFINED_L3,
+ HEADER_TYPE_USER_DEFINED_L4,
+ HEADER_TYPE_USER_DEFINED_SHIM1,
+ HEADER_TYPE_USER_DEFINED_SHIM2,
+ MAX_HEADER_TYPE_COUNT
+} ioc_net_header_type;
+
+#endif /* __NET_EXT_H */
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: BSD-3-Clause
-# Copyright 2018 NXP
+# Copyright 2018-2019 NXP
if not is_linux
build = false
@@ -8,6 +8,7 @@ endif
deps += ['mempool_dpaa']
sources = files('dpaa_ethdev.c',
+ 'fmlib/fm_lib.c',
'dpaa_rxtx.c')
if cc.has_argument('-Wno-pointer-arith')