Message ID | 20201001132013.1866299-1-vladimir.oltean@nxp.com |
---|---|
Headers | show |
Series | Add Seville Ethernet switch to T1040RDB | expand |
From: Vladimir Oltean <vladimir.oltean@nxp.com> Date: Thu, 1 Oct 2020 16:20:11 +0300 > Seville is a DSA switch that is embedded inside the T1040 SoC, and > supported by the mscc_seville DSA driver inside drivers/net/dsa/ocelot. > > This series adds this switch to the SoC's dtsi files and to the T1040RDB > board file. I am assuming the devicetree folks will pick this series up. Thanks.
On Thu, Oct 01, 2020 at 01:10:05PM -0700, David Miller wrote: > From: Vladimir Oltean <vladimir.oltean@nxp.com> > Date: Thu, 1 Oct 2020 16:20:11 +0300 > > > Seville is a DSA switch that is embedded inside the T1040 SoC, and > > supported by the mscc_seville DSA driver inside drivers/net/dsa/ocelot. > > > > This series adds this switch to the SoC's dtsi files and to the T1040RDB > > board file. > > I am assuming the devicetree folks will pick this series up. > > Thanks. > I can also resend via net-next if that's easier (the last commit on arch/powerpc/boot/dts/fsl/t104*, as per today's linux-next, has been in 2018, so there is no conflict). I need to resend anyway, due to an epic failure where I got the port numbering wrong...