mbox series

[v2,0/3] mainline add Altesco I6P board

Message ID 20201030140029.22329-1-o.rempel@pengutronix.de
Headers show
Series mainline add Altesco I6P board | expand

Message

Oleksij Rempel Oct. 30, 2020, 2 p.m. UTC 
changes v2:
- rebase against
  git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git for-next
- remove spaces
- use Co-developed-by instead of Co-Developed-by 

Oleksij Rempel (3):
  dt-bindings: vendor-prefixes: Add an entry for Altus-Escon-Company
  dt-bindings: arm: fsl: add Altesco I6P board
  ARM: dts: add Altesco I6P board

 .../devicetree/bindings/arm/fsl.yaml          |   1 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm/boot/dts/Makefile                    |   1 +
 arch/arm/boot/dts/imx6dl-alti6p.dts           | 564 ++++++++++++++++++
 4 files changed, 568 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6dl-alti6p.dts

Comments

Shawn Guo Nov. 10, 2020, 12:43 a.m. UTC | #1 
On Fri, Oct 30, 2020 at 03:00:26PM +0100, Oleksij Rempel wrote:
> changes v2:

> - rebase against

>   git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git for-next

> - remove spaces

> - use Co-developed-by instead of Co-Developed-by 

> 

> Oleksij Rempel (3):

>   dt-bindings: vendor-prefixes: Add an entry for Altus-Escon-Company

>   dt-bindings: arm: fsl: add Altesco I6P board

>   ARM: dts: add Altesco I6P board


Applied all, thanks.