| Message ID | 1600450426-14063-1-git-send-email-srivasam@codeaurora.org |
|---|---|
| State | New |
| Headers | show |
| Series | [v4] arm64: dts: qcom: sc7180: Add lpass cpu node for I2S driver | expand |
On 18/09/2020 18:33, Srinivasa Rao Mandadapu wrote: > From: Ajit Pandey <ajitp@codeaurora.org> > > Add the I2S controller node to sc7180 dtsi. > Add pinmux for primary and secondary I2S. > > Signed-off-by: Ajit Pandey <ajitp@codeaurora.org> > Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org> > Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org> > Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> > --- Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > Changes since v3: > -- The typo error fix > Changes since v2: > -- The plement of lpass_cpu node is changed > Changes since v1: > -- Updated I2S pin control nodes with grouping common pin controls > -- Updated lpass_cpu node with proper control names > > arch/arm64/boot/dts/qcom/sc7180.dtsi | 69 ++++++++++++++++++++++++++++++++++++ > 1 file changed, 69 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi > index 6678f1e..427a4bf 100644 > --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi > @@ -1742,6 +1742,45 @@ > }; > }; > > + sec_mi2s_active: sec-mi2s-active { > + pinmux { > + pins = "gpio49", "gpio50", "gpio51"; > + function = "mi2s_1"; > + }; > + > + pinconf { > + pins = "gpio49", "gpio50", "gpio51"; > + drive-strength = <8>; > + bias-pull-up; > + }; > + }; > + > + pri_mi2s_active: pri-mi2s-active { > + pinmux { > + pins = "gpio53", "gpio54", "gpio55", "gpio56"; > + function = "mi2s_0"; > + }; > + > + pinconf { > + pins = "gpio53", "gpio54", "gpio55", "gpio56"; > + drive-strength = <8>; > + bias-pull-up; > + }; > + }; > + > + pri_mi2s_mclk_active: pri-mi2s-mclk-active { > + pinmux { > + pins = "gpio57"; > + function = "lpass_ext"; > + }; > + > + pinconf { > + pins = "gpio57"; > + drive-strength = <8>; > + bias-pull-up; > + }; > + }; > + > sdc1_on: sdc1-on { > pinconf-clk { > pins = "sdc1_clk"; > @@ -3389,6 +3428,36 @@ > #power-domain-cells = <1>; > }; > > + lpass_cpu: lpass@62f00000 { > + compatible = "qcom,sc7180-lpass-cpu"; > + > + reg = <0 0x62f00000 0 0x29000>; > + reg-names = "lpass-lpaif"; > + > + iommus = <&apps_smmu 0x1020 0>; > + > + power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>; > + > + clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>, > + <&lpasscc LPASS_AUDIO_CORE_CORE_CLK>, > + <&lpasscc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>, > + <&lpasscc LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK>, > + <&lpasscc LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK>, > + <&lpasscc LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK>; > + > + clock-names = "pcnoc-sway-clk", "audio-core", > + "mclk0", "pcnoc-mport-clk", > + "mi2s-bit-clk0", "mi2s-bit-clk1"; > + > + > + #sound-dai-cells = <1>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "lpass-irq-lpaif"; > + }; > + > lpass_hm: clock-controller@63000000 { > compatible = "qcom,sc7180-lpasshm"; > reg = <0 0x63000000 0 0x28>; >
Hello: This patch was applied to qcom/linux.git (refs/heads/for-next): On Fri, 18 Sep 2020 23:03:46 +0530 you wrote: > From: Ajit Pandey <ajitp@codeaurora.org> > > Add the I2S controller node to sc7180 dtsi. > Add pinmux for primary and secondary I2S. > > Signed-off-by: Ajit Pandey <ajitp@codeaurora.org> > Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org> > Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org> > Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> > > [...] Here is the summary with links: - [v4] arm64: dts: qcom: sc7180: Add lpass cpu node for I2S driver https://git.kernel.org/qcom/c/96ddfbf46a35 You are awesome, thank you! -- Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 6678f1e..427a4bf 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -1742,6 +1742,45 @@ }; }; + sec_mi2s_active: sec-mi2s-active { + pinmux { + pins = "gpio49", "gpio50", "gpio51"; + function = "mi2s_1"; + }; + + pinconf { + pins = "gpio49", "gpio50", "gpio51"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + pri_mi2s_active: pri-mi2s-active { + pinmux { + pins = "gpio53", "gpio54", "gpio55", "gpio56"; + function = "mi2s_0"; + }; + + pinconf { + pins = "gpio53", "gpio54", "gpio55", "gpio56"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + pri_mi2s_mclk_active: pri-mi2s-mclk-active { + pinmux { + pins = "gpio57"; + function = "lpass_ext"; + }; + + pinconf { + pins = "gpio57"; + drive-strength = <8>; + bias-pull-up; + }; + }; + sdc1_on: sdc1-on { pinconf-clk { pins = "sdc1_clk"; @@ -3389,6 +3428,36 @@ #power-domain-cells = <1>; }; + lpass_cpu: lpass@62f00000 { + compatible = "qcom,sc7180-lpass-cpu"; + + reg = <0 0x62f00000 0 0x29000>; + reg-names = "lpass-lpaif"; + + iommus = <&apps_smmu 0x1020 0>; + + power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>; + + clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>, + <&lpasscc LPASS_AUDIO_CORE_CORE_CLK>, + <&lpasscc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>, + <&lpasscc LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK>, + <&lpasscc LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK>, + <&lpasscc LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK>; + + clock-names = "pcnoc-sway-clk", "audio-core", + "mclk0", "pcnoc-mport-clk", + "mi2s-bit-clk0", "mi2s-bit-clk1"; + + + #sound-dai-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "lpass-irq-lpaif"; + }; + lpass_hm: clock-controller@63000000 { compatible = "qcom,sc7180-lpasshm"; reg = <0 0x63000000 0 0x28>;