@@ -1132,8 +1132,8 @@ static int m88e1510_config_init(struct phy_device *phydev)
return err;
/* PHY reset is necessary after changing MODE[2:0] */
- err = phy_modify(phydev, MII_88E1510_GEN_CTRL_REG_1, 0,
- MII_88E1510_GEN_CTRL_REG_1_RESET);
+ err = phy_set_bits(phydev, MII_88E1510_GEN_CTRL_REG_1,
+ MII_88E1510_GEN_CTRL_REG_1_RESET);
if (err < 0)
return err;
@@ -1725,8 +1725,8 @@ static int m88e1318_set_wol(struct phy_device *phydev,
__phy_read(phydev, MII_M1011_IEVENT);
/* Enable the WOL interrupt */
- err = __phy_modify(phydev, MII_88E1318S_PHY_CSIER, 0,
- MII_88E1318S_PHY_CSIER_WOL_EIE);
+ err = __phy_set_bits(phydev, MII_88E1318S_PHY_CSIER,
+ MII_88E1318S_PHY_CSIER_WOL_EIE);
if (err < 0)
goto error;
@@ -1764,9 +1764,9 @@ static int m88e1318_set_wol(struct phy_device *phydev,
goto error;
/* Clear WOL status and enable magic packet matching */
- err = __phy_modify(phydev, MII_88E1318S_PHY_WOL_CTRL, 0,
- MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS |
- MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE);
+ err = __phy_set_bits(phydev, MII_88E1318S_PHY_WOL_CTRL,
+ MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS |
+ MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE);
if (err < 0)
goto error;
} else {
@@ -1995,7 +1995,7 @@ static int marvell_cable_test_start_common(struct phy_device *phydev)
return bmsr;
if (bmcr & BMCR_ANENABLE) {
- ret = phy_modify(phydev, MII_BMCR, BMCR_ANENABLE, 0);
+ ret = phy_clear_bits(phydev, MII_BMCR, BMCR_ANENABLE);
if (ret < 0)
return ret;
ret = genphy_soft_reset(phydev);
a set of phy_set_bits() looks more neater Signed-off-by: Yejune Deng <yejune.deng@gmail.com> --- drivers/net/phy/marvell.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)