diff mbox series

[v4,2/5] usb: dwc3: host: Add suspend_quirk for dwc3 host

Message ID 1603831083-2025-3-git-send-email-sanm@codeaurora.org
State New
Headers show
Series USB DWC3 host wake up support from system suspend | expand

Commit Message

Sandeep Maheswaram Oct. 27, 2020, 8:38 p.m. UTC
Adding suspend quirk function for dwc3 host which will be called
during xhci suspend.
Setting hs_phy_mode, ss_phy_mode flags and phy mode during host suspend.

Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
---
 drivers/usb/dwc3/host.c | 51 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 51 insertions(+)

Comments

Matthias Kaehlcke Dec. 11, 2020, 12:25 a.m. UTC | #1
On Wed, Oct 28, 2020 at 02:08:00AM +0530, Sandeep Maheswaram wrote:
> Adding suspend quirk function for dwc3 host which will be called

> during xhci suspend.

> Setting hs_phy_mode, ss_phy_mode flags and phy mode during host suspend.

> 

> Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>

> ---

>  drivers/usb/dwc3/host.c | 51 +++++++++++++++++++++++++++++++++++++++++++++++++

>  1 file changed, 51 insertions(+)

> 

> diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c

> index e195176..db03db8 100644

> --- a/drivers/usb/dwc3/host.c

> +++ b/drivers/usb/dwc3/host.c

> @@ -11,6 +11,13 @@

>  #include <linux/platform_device.h>

>  

>  #include "core.h"

> +#include "../host/xhci.h"

> +#include "../host/xhci-plat.h"

> +int xhci_dwc3_suspend_quirk(struct usb_hcd *hcd);

> +

> +static const struct xhci_plat_priv xhci_plat_dwc3_xhci = {

> +	.suspend_quirk = xhci_dwc3_suspend_quirk,

> +};

>  

>  static int dwc3_host_get_irq(struct dwc3 *dwc)

>  {

> @@ -115,6 +122,13 @@ int dwc3_host_init(struct dwc3 *dwc)

>  		}

>  	}

>  

> +	ret = platform_device_add_data(xhci, &xhci_plat_dwc3_xhci,

> +			sizeof(struct xhci_plat_priv));

> +	if (ret) {

> +		dev_err(dwc->dev, "failed to add data to xHCI\n");

> +		goto err;

> +	}

> +

>  	ret = platform_device_add(xhci);

>  	if (ret) {

>  		dev_err(dwc->dev, "failed to register xHCI device\n");

> @@ -127,6 +141,43 @@ int dwc3_host_init(struct dwc3 *dwc)

>  	return ret;

>  }

>  

> +static void dwc3_set_phy_mode(struct usb_hcd *hcd)

> +{

> +

> +	int i, num_ports;

> +	u32 reg;

> +	unsigned int ss_phy_mode = 0;

> +	struct device *dev = hcd->self.controller;

> +	struct dwc3 *dwc = dev_get_drvdata(dev->parent);


nit: the use of 'dev' seems misleading here. By convention 'dev' refers
to the 'struct device' of the driver, here it refers to a child of that
device. It's probably not super-important, but 'dev' is also not realy
needed, you could omit it and change the assignment of 'dwc3' to:

	struct dwc3 *dwc = dev_get_drvdata(hcd->self.controller->parent);

> +	struct xhci_hcd	*xhci_hcd = hcd_to_xhci(hcd);

> +

> +	dwc->hs_phy_mode = 0;

> +

> +	reg = readl(&xhci_hcd->cap_regs->hcs_params1);

> +

> +	num_ports = HCS_MAX_PORTS(reg);

> +	for (i = 0; i < num_ports; i++) {

> +		reg = readl(&xhci_hcd->op_regs->port_status_base + i * 0x04);

> +		if (reg & PORT_PE) {

> +			if (DEV_HIGHSPEED(reg) || DEV_FULLSPEED(reg))

> +				dwc->hs_phy_mode |= PHY_MODE_USB_HOST_HS;

> +			else if (DEV_LOWSPEED(reg))

> +				dwc->hs_phy_mode |= PHY_MODE_USB_HOST_LS;

> +

> +			if (DEV_SUPERSPEED(reg))

> +				ss_phy_mode |= PHY_MODE_USB_HOST_SS;

> +		}

> +	}

> +	phy_set_mode(dwc->usb2_generic_phy, dwc->hs_phy_mode);

> +	phy_set_mode(dwc->usb3_generic_phy, ss_phy_mode);

> +}

> +

> +int xhci_dwc3_suspend_quirk(struct usb_hcd *hcd)

> +{

> +	dwc3_set_phy_mode(hcd);

> +	return 0;

> +}

> +

>  void dwc3_host_exit(struct dwc3 *dwc)

>  {

>  	platform_device_unregister(dwc->xhci);


Other than the nit:

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index e195176..db03db8 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -11,6 +11,13 @@ 
 #include <linux/platform_device.h>
 
 #include "core.h"
+#include "../host/xhci.h"
+#include "../host/xhci-plat.h"
+int xhci_dwc3_suspend_quirk(struct usb_hcd *hcd);
+
+static const struct xhci_plat_priv xhci_plat_dwc3_xhci = {
+	.suspend_quirk = xhci_dwc3_suspend_quirk,
+};
 
 static int dwc3_host_get_irq(struct dwc3 *dwc)
 {
@@ -115,6 +122,13 @@  int dwc3_host_init(struct dwc3 *dwc)
 		}
 	}
 
+	ret = platform_device_add_data(xhci, &xhci_plat_dwc3_xhci,
+			sizeof(struct xhci_plat_priv));
+	if (ret) {
+		dev_err(dwc->dev, "failed to add data to xHCI\n");
+		goto err;
+	}
+
 	ret = platform_device_add(xhci);
 	if (ret) {
 		dev_err(dwc->dev, "failed to register xHCI device\n");
@@ -127,6 +141,43 @@  int dwc3_host_init(struct dwc3 *dwc)
 	return ret;
 }
 
+static void dwc3_set_phy_mode(struct usb_hcd *hcd)
+{
+
+	int i, num_ports;
+	u32 reg;
+	unsigned int ss_phy_mode = 0;
+	struct device *dev = hcd->self.controller;
+	struct dwc3 *dwc = dev_get_drvdata(dev->parent);
+	struct xhci_hcd	*xhci_hcd = hcd_to_xhci(hcd);
+
+	dwc->hs_phy_mode = 0;
+
+	reg = readl(&xhci_hcd->cap_regs->hcs_params1);
+
+	num_ports = HCS_MAX_PORTS(reg);
+	for (i = 0; i < num_ports; i++) {
+		reg = readl(&xhci_hcd->op_regs->port_status_base + i * 0x04);
+		if (reg & PORT_PE) {
+			if (DEV_HIGHSPEED(reg) || DEV_FULLSPEED(reg))
+				dwc->hs_phy_mode |= PHY_MODE_USB_HOST_HS;
+			else if (DEV_LOWSPEED(reg))
+				dwc->hs_phy_mode |= PHY_MODE_USB_HOST_LS;
+
+			if (DEV_SUPERSPEED(reg))
+				ss_phy_mode |= PHY_MODE_USB_HOST_SS;
+		}
+	}
+	phy_set_mode(dwc->usb2_generic_phy, dwc->hs_phy_mode);
+	phy_set_mode(dwc->usb3_generic_phy, ss_phy_mode);
+}
+
+int xhci_dwc3_suspend_quirk(struct usb_hcd *hcd)
+{
+	dwc3_set_phy_mode(hcd);
+	return 0;
+}
+
 void dwc3_host_exit(struct dwc3 *dwc)
 {
 	platform_device_unregister(dwc->xhci);