diff mbox series

[v2,2/4] pinctrl: sunxi: h6-r: Add s_rsb pin functions

Message ID 20210103100007.32867-3-samuel@sholland.org
State Accepted
Commit b071a124558fce2135f62b25d02cf3ba9bf3de6a
Headers show
Series Allwinner H6 RSB support | expand

Commit Message

Samuel Holland Jan. 3, 2021, 10 a.m. UTC
As there is an RSB controller in the H6 SoC, there should be some pin
configuration for it. While no such configuration is documented, the
"s_i2c" pins are suspiciously on the "alternate" function 3, with no
primary function 2 given. This suggests the primary function for these
pins is actually RSB, and that is indeed the case.

Add the "s_rsb" pin functions so the RSB controller can be used.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---
 drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c | 2 ++
 1 file changed, 2 insertions(+)

Comments

Linus Walleij Jan. 5, 2021, 10:35 p.m. UTC | #1
On Sun, Jan 3, 2021 at 11:00 AM Samuel Holland <samuel@sholland.org> wrote:

> As there is an RSB controller in the H6 SoC, there should be some pin

> configuration for it. While no such configuration is documented, the

> "s_i2c" pins are suspiciously on the "alternate" function 3, with no

> primary function 2 given. This suggests the primary function for these

> pins is actually RSB, and that is indeed the case.

>

> Add the "s_rsb" pin functions so the RSB controller can be used.

>

> Signed-off-by: Samuel Holland <samuel@sholland.org>


Is it OK if I just apply this patch to the pinctrl tree?

Yours,
Linus Walleij
Chen-Yu Tsai Jan. 6, 2021, 2:39 a.m. UTC | #2
On Wed, Jan 6, 2021 at 6:35 AM Linus Walleij <linus.walleij@linaro.org> wrote:
>

> On Sun, Jan 3, 2021 at 11:00 AM Samuel Holland <samuel@sholland.org> wrote:

>

> > As there is an RSB controller in the H6 SoC, there should be some pin

> > configuration for it. While no such configuration is documented, the

> > "s_i2c" pins are suspiciously on the "alternate" function 3, with no

> > primary function 2 given. This suggests the primary function for these

> > pins is actually RSB, and that is indeed the case.

> >

> > Add the "s_rsb" pin functions so the RSB controller can be used.

> >

> > Signed-off-by: Samuel Holland <samuel@sholland.org>

>

> Is it OK if I just apply this patch to the pinctrl tree?


Please do.

Thanks
ChenYu
Linus Walleij Jan. 6, 2021, 8:10 p.m. UTC | #3
On Sun, Jan 3, 2021 at 11:00 AM Samuel Holland <samuel@sholland.org> wrote:

> As there is an RSB controller in the H6 SoC, there should be some pin

> configuration for it. While no such configuration is documented, the

> "s_i2c" pins are suspiciously on the "alternate" function 3, with no

> primary function 2 given. This suggests the primary function for these

> pins is actually RSB, and that is indeed the case.

>

> Add the "s_rsb" pin functions so the RSB controller can be used.

>

> Signed-off-by: Samuel Holland <samuel@sholland.org>


This patch applied to the pinctrl tree.

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c b/drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c
index 4557e18d5989..c7d90c44e87a 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c
@@ -24,11 +24,13 @@  static const struct sunxi_desc_pin sun50i_h6_r_pins[] = {
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 0),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "s_rsb"),		/* SCK */
 		  SUNXI_FUNCTION(0x3, "s_i2c"),		/* SCK */
 		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 0)),	/* PL_EINT0 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 1),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "s_rsb"),		/* SDA */
 		  SUNXI_FUNCTION(0x3, "s_i2c"),		/* SDA */
 		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 1)),	/* PL_EINT1 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 2),