diff mbox

[V5,2/8] net: sxgbe: add basic framework for Samsung 10Gb ethernet driver

Message ID 002801cf42d6$a27317c0$e7594740$@samsung.com
State New
Headers show

Commit Message

Byungho An March 18, 2014, 6:19 p.m. UTC
From: Siva Reddy <siva.kallam@samsung.com>

This patch adds support for Samsung 10Gb ethernet driver(sxgbe).

- sxgbe core initialization
- Tx and Rx support
- MDIO support
- ISRs for Tx and Rx
- ifconfig support to driver

Signed-off-by: Siva Reddy Kallam <siva.kallam@samsung.com>
Signed-off-by: Vipul Pandya <vipul.pandya@samsung.com>
Signed-off-by: Girish K S <ks.giri@samsung.com>
Neatening-by: Joe Perches <joe@perches.com>
Signed-off-by: Byungho An <bh74.an@samsung.com>
---
 drivers/net/ethernet/Kconfig                       |    1 +
 drivers/net/ethernet/Makefile                      |    1 +
 drivers/net/ethernet/samsung/Kconfig               |   20 +
 drivers/net/ethernet/samsung/Makefile              |    5 +
 drivers/net/ethernet/samsung/sxgbe/Kconfig         |    9 +
 drivers/net/ethernet/samsung/sxgbe/Makefile        |    4 +
 drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h  |  459 +++++
 drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c    |  157 ++
 drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c    |  515 +++++
 drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h    |  291 +++
 drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.c     |  377 ++++
 drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.h     |   49 +
 drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c |   44 +
 drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c    | 2063 ++++++++++++++++++++
 drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c    |  274 +++
 drivers/net/ethernet/samsung/sxgbe/sxgbe_mtl.c     |  252 +++
 drivers/net/ethernet/samsung/sxgbe/sxgbe_mtl.h     |  104 +
 .../net/ethernet/samsung/sxgbe/sxgbe_platform.c    |  260 +++
 drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h     |  477 +++++
 drivers/net/ethernet/samsung/sxgbe/sxgbe_xpcs.c    |   92 +
 drivers/net/ethernet/samsung/sxgbe/sxgbe_xpcs.h    |   38 +
 include/linux/sxgbe_platform.h                     |   54 +
 22 files changed, 5546 insertions(+)
 create mode 100644 drivers/net/ethernet/samsung/Kconfig
 create mode 100644 drivers/net/ethernet/samsung/Makefile
 create mode 100644 drivers/net/ethernet/samsung/sxgbe/Kconfig
 create mode 100644 drivers/net/ethernet/samsung/sxgbe/Makefile
 create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h
 create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c
 create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c
 create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h
 create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.c
 create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.h
 create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c
 create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
 create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c
 create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_mtl.c
 create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_mtl.h
 create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c
 create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h
 create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_xpcs.c
 create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_xpcs.h
 create mode 100644 include/linux/sxgbe_platform.h

Comments

Florian Fainelli March 18, 2014, 6:59 p.m. UTC | #1
2014-03-18 11:19 GMT-07:00 Byungho An <bh74.an@samsung.com>:
> From: Siva Reddy <siva.kallam@samsung.com>
>
> This patch adds support for Samsung 10Gb ethernet driver(sxgbe).
>
> - sxgbe core initialization
> - Tx and Rx support
> - MDIO support
> - ISRs for Tx and Rx
> - ifconfig support to driver

Too many files to review at once, the diffstat was around 5000+ lines!
You should split this into logical parts, or just submit the basic
bits for now and add the features later.

[snip]

> +       ret = register_netdev(ndev);
> +       if (ret) {
> +               pr_err("%s: ERROR %i registering the device\n", __func__, ret);
> +               goto error_netdev_register;
> +       }
> +
> +       priv->sxgbe_clk = clk_get(priv->device, SXGBE_RESOURCE_NAME);
> +       if (IS_ERR(priv->sxgbe_clk)) {
> +               netdev_warn(ndev, "%s: warning: cannot get CSR clock\n",
> +                           __func__);
> +               goto error_clk_get;
> +       }

This is racy, after register_netdev() is called, the network stack is
free to use the interface, which means that as much as possible needs
to be initialized before you call it, including clocks, and MDIO.

> +
> +       /* If a specific clk_csr value is passed from the platform
> +        * this means that the CSR Clock Range selection cannot be
> +        * changed at run-time and it is fixed. Viceversa the driver'll try to
> +        * set the MDC clock dynamically according to the csr actual
> +        * clock input.
> +        */
> +       if (!priv->plat->clk_csr)
> +               sxgbe_clk_csr_set(priv);
> +       else
> +               priv->clk_csr = priv->plat->clk_csr;
> +
> +       /* MDIO bus Registration */
> +       ret = sxgbe_mdio_register(ndev);
> +       if (ret < 0) {
> +               netdev_dbg(ndev, "%s: MDIO bus (id: %d) registration failed\n",
> +                          __func__, priv->plat->bus_id);
> +               goto error_mdio_register;
> +       }

Don't do this, register your MDIO bus before calling register_netdev().

> +
> +       sxgbe_check_ether_addr(priv);
> +
> +       return priv;
> +
> +error_mdio_register:
> +       clk_put(priv->sxgbe_clk);
> +error_clk_get:
> +       unregister_netdev(ndev);
> +error_netdev_register:
> +       netif_napi_del(&priv->napi);
> +error_free_netdev:
> +       free_netdev(ndev);
> +
> +       return NULL;
> +}
> +
> +/**
> + * sxgbe_dvr_remove
> + * @ndev: net device pointer
> + * Description: this function resets the TX/RX processes, disables the MAC RX/TX
> + * changes the link status, releases the DMA descriptor rings.
> + */
> +int sxgbe_dvr_remove(struct net_device *ndev)
> +{
> +       struct sxgbe_priv_data *priv = netdev_priv(ndev);
> +
> +       netdev_info(ndev, "%s: removing driver\n", __func__);
> +
> +       priv->hw->dma->stop_rx(priv->ioaddr, SXGBE_RX_QUEUES);
> +       priv->hw->dma->stop_tx(priv->ioaddr, SXGBE_TX_QUEUES);
> +
> +       priv->hw->mac->enable_tx(priv->ioaddr, false);
> +       priv->hw->mac->enable_rx(priv->ioaddr, false);
> +
> +       netif_napi_del(&priv->napi);
> +
> +       sxgbe_mdio_unregister(ndev);
> +
> +       netif_carrier_off(ndev);

This is not required, both the PHY library and the network stack will
do that for you.

[snip]

> +       /* register with kernel subsystem */
> +       err = mdiobus_register(mdio_bus);
> +       if (err != 0) {
> +               netdev_err(ndev, "mdiobus register failed\n");
> +               goto mdiobus_err;
> +       }
> +
> +       for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
> +               struct phy_device *phy = mdio_bus->phy_map[phy_addr];
> +               if (phy) {
> +                       char irq_num[4];
> +                       char *irq_str;
> +                       /* If an IRQ was provided to be assigned after
> +                        * the bus probe, do it here.
> +                        */
> +                       if ((mdio_data->irqs == NULL) &&
> +                           (mdio_data->probed_phy_irq > 0)) {
> +                               irqlist[phy_addr] = mdio_data->probed_phy_irq;
> +                               phy->irq = mdio_data->probed_phy_irq;
> +                       }
> +
> +                       /* If we're  going to bind the MAC to this PHY bus,
> +                        * and no PHY number was provided to the MAC,
> +                        * use the one probed here.
> +                        */
> +                       if (priv->plat->phy_addr == -1)
> +                               priv->plat->phy_addr = phy_addr;
> +
> +                       act = (priv->plat->phy_addr == phy_addr);
> +                       switch (phy->irq) {
> +                       case PHY_POLL:
> +                               irq_str = "POLL";
> +                               break;
> +                       case PHY_IGNORE_INTERRUPT:
> +                               irq_str = "IGNORE";
> +                               break;
> +                       default:
> +                               sprintf(irq_num, "%d", phy->irq);
> +                               irq_str = irq_num;
> +                               break;
> +                       }
> +                       netdev_info(ndev, "PHY ID %08x at %d IRQ %s (%s)%s\n",
> +                                   phy->phy_id, phy_addr, irq_str,
> +                                   dev_name(&phy->dev), act ? " active" : "");
> +                       phy_found = 1;
> +               }

This is clunky, and you are duplicating what of_mdiobus_register()
will do for you, but since you are not using the standard Ethernet PHY
device tree node, you could not use that code. So please use the
standard Ethernet PHY device tree node such that you can remove that
code and leverage it instead.
Joe Perches March 18, 2014, 7:35 p.m. UTC | #2
On Tue, 2014-03-18 at 11:19 -0700, Byungho An wrote:
> From: Siva Reddy <siva.kallam@samsung.com>
> 
> This patch adds support for Samsung 10Gb ethernet driver(sxgbe).

More trivia, nothing that should stop this from
being applied and updated later...

> diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c
[]
> +static int sxgbe_mdio_busy_wait(void __iomem *ioaddr, unsigned int mii_data)
> +{
> +	unsigned long cur_time;
> +	unsigned long fin_time = jiffies + 3 * HZ; /* 30 ms */

This is actually 3 seconds.
If this should be 30ms, then use msecs_to_jiffies(30)

> +
> +	do {
> +		cur_time = jiffies;
> +		if (readl(ioaddr + mii_data) & SXGBE_MII_BUSY)
> +			cpu_relax();
> +		else
> +			return 0;
> +	} while (!time_after_eq(cur_time, fin_time));
> +
> +	return -EBUSY;
> +}

This may be clearer as

	unsigned long fin_time = jiffies + msecs_to_jiffies(30);
 
	while (!time_after(jiffies, fin_time))
		if (!(readl(ioaddr + mii_data) & SXGBE_MII_BUSY))
			return 0;
		cpu_relax();
	}

	return -EBUSY;


--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Byungho An March 18, 2014, 8:56 p.m. UTC | #3
Joe Perches <joe@perches.com> wrote : 
> On Tue, 2014-03-18 at 11:19 -0700, Byungho An wrote:
> > From: Siva Reddy <siva.kallam@samsung.com>
> >
> > This patch adds support for Samsung 10Gb ethernet driver(sxgbe).
> 
> More trivia, nothing that should stop this from being applied and updated
> later...
> 
> > diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c
> > b/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c
> []
> > +static int sxgbe_mdio_busy_wait(void __iomem *ioaddr, unsigned int
> > +mii_data) {
> > +	unsigned long cur_time;
> > +	unsigned long fin_time = jiffies + 3 * HZ; /* 30 ms */
> 
> This is actually 3 seconds.
> If this should be 30ms, then use msecs_to_jiffies(30)
This is a typo, comment will be changed to "3 sec".

> 
> > +
> > +	do {
> > +		cur_time = jiffies;
> > +		if (readl(ioaddr + mii_data) & SXGBE_MII_BUSY)
> > +			cpu_relax();
> > +		else
> > +			return 0;
> > +	} while (!time_after_eq(cur_time, fin_time));
> > +
> > +	return -EBUSY;
> > +}
> 
> This may be clearer as
> 
> 	unsigned long fin_time = jiffies + msecs_to_jiffies(30);
> 
> 	while (!time_after(jiffies, fin_time))
> 		if (!(readl(ioaddr + mii_data) & SXGBE_MII_BUSY))
> 			return 0;
> 		cpu_relax();
> 	}
> 
> 	return -EBUSY;
OK.

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Byungho An March 18, 2014, 10:16 p.m. UTC | #4
Florian Fainelli <f.fainelli@gmail.com> wrote:
> 2014-03-18 11:19 GMT-07:00 Byungho An <bh74.an@samsung.com>:
> > From: Siva Reddy <siva.kallam@samsung.com>
> >
> > This patch adds support for Samsung 10Gb ethernet driver(sxgbe).
> >
> > - sxgbe core initialization
> > - Tx and Rx support
> > - MDIO support
> > - ISRs for Tx and Rx
> > - ifconfig support to driver
> 
> Too many files to review at once, the diffstat was around 5000+ lines!
> You should split this into logical parts, or just submit the basic bits for now and
> add the features later.
Yes. but I think it is one logically, after this patch there won't be much code at once.

> 
> [snip]
> 
> > +       ret = register_netdev(ndev);
> > +       if (ret) {
> > +               pr_err("%s: ERROR %i registering the device\n", __func__, ret);
> > +               goto error_netdev_register;
> > +       }
> > +
> > +       priv->sxgbe_clk = clk_get(priv->device, SXGBE_RESOURCE_NAME);
> > +       if (IS_ERR(priv->sxgbe_clk)) {
> > +               netdev_warn(ndev, "%s: warning: cannot get CSR clock\n",
> > +                           __func__);
> > +               goto error_clk_get;
> > +       }
> 
> This is racy, after register_netdev() is called, the network stack is free to use
> the interface, which means that as much as possible needs to be initialized
> before you call it, including clocks, and MDIO.
> 
> > +
> > +       /* If a specific clk_csr value is passed from the platform
> > +        * this means that the CSR Clock Range selection cannot be
> > +        * changed at run-time and it is fixed. Viceversa the driver'll try to
> > +        * set the MDC clock dynamically according to the csr actual
> > +        * clock input.
> > +        */
> > +       if (!priv->plat->clk_csr)
> > +               sxgbe_clk_csr_set(priv);
> > +       else
> > +               priv->clk_csr = priv->plat->clk_csr;
> > +
> > +       /* MDIO bus Registration */
> > +       ret = sxgbe_mdio_register(ndev);
> > +       if (ret < 0) {
> > +               netdev_dbg(ndev, "%s: MDIO bus (id: %d) registration failed\n",
> > +                          __func__, priv->plat->bus_id);
> > +               goto error_mdio_register;
> > +       }
> 
> Don't do this, register your MDIO bus before calling register_netdev().
OK.

> 
> > +
> > +       sxgbe_check_ether_addr(priv);
> > +
> > +       return priv;
> > +
> > +error_mdio_register:
> > +       clk_put(priv->sxgbe_clk);
> > +error_clk_get:
> > +       unregister_netdev(ndev);
> > +error_netdev_register:
> > +       netif_napi_del(&priv->napi);
> > +error_free_netdev:
> > +       free_netdev(ndev);
> > +
> > +       return NULL;
> > +}
> > +
> > +/**
> > + * sxgbe_dvr_remove
> > + * @ndev: net device pointer
> > + * Description: this function resets the TX/RX processes, disables
> > +the MAC RX/TX
> > + * changes the link status, releases the DMA descriptor rings.
> > + */
> > +int sxgbe_dvr_remove(struct net_device *ndev) {
> > +       struct sxgbe_priv_data *priv = netdev_priv(ndev);
> > +
> > +       netdev_info(ndev, "%s: removing driver\n", __func__);
> > +
> > +       priv->hw->dma->stop_rx(priv->ioaddr, SXGBE_RX_QUEUES);
> > +       priv->hw->dma->stop_tx(priv->ioaddr, SXGBE_TX_QUEUES);
> > +
> > +       priv->hw->mac->enable_tx(priv->ioaddr, false);
> > +       priv->hw->mac->enable_rx(priv->ioaddr, false);
> > +
> > +       netif_napi_del(&priv->napi);
> > +
> > +       sxgbe_mdio_unregister(ndev);
> > +
> > +       netif_carrier_off(ndev);
> 
> This is not required, both the PHY library and the network stack will do that for
> you.
You mean netif_napi_del and netif_carrier_off? or all of sxgbe_dvr_remove function?
I think dma/mac control are needed.

> 
> [snip]
> 
> > +       /* register with kernel subsystem */
> > +       err = mdiobus_register(mdio_bus);
> > +       if (err != 0) {
> > +               netdev_err(ndev, "mdiobus register failed\n");
> > +               goto mdiobus_err;
> > +       }
> > +
> > +       for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
> > +               struct phy_device *phy = mdio_bus->phy_map[phy_addr];
> > +               if (phy) {
> > +                       char irq_num[4];
> > +                       char *irq_str;
> > +                       /* If an IRQ was provided to be assigned after
> > +                        * the bus probe, do it here.
> > +                        */
> > +                       if ((mdio_data->irqs == NULL) &&
> > +                           (mdio_data->probed_phy_irq > 0)) {
> > +                               irqlist[phy_addr] = mdio_data->probed_phy_irq;
> > +                               phy->irq = mdio_data->probed_phy_irq;
> > +                       }
> > +
> > +                       /* If we're  going to bind the MAC to this PHY bus,
> > +                        * and no PHY number was provided to the MAC,
> > +                        * use the one probed here.
> > +                        */
> > +                       if (priv->plat->phy_addr == -1)
> > +                               priv->plat->phy_addr = phy_addr;
> > +
> > +                       act = (priv->plat->phy_addr == phy_addr);
> > +                       switch (phy->irq) {
> > +                       case PHY_POLL:
> > +                               irq_str = "POLL";
> > +                               break;
> > +                       case PHY_IGNORE_INTERRUPT:
> > +                               irq_str = "IGNORE";
> > +                               break;
> > +                       default:
> > +                               sprintf(irq_num, "%d", phy->irq);
> > +                               irq_str = irq_num;
> > +                               break;
> > +                       }
> > +                       netdev_info(ndev, "PHY ID %08x at %d IRQ %s (%s)%s\n",
> > +                                   phy->phy_id, phy_addr, irq_str,
> > +                                   dev_name(&phy->dev), act ? " active" : "");
> > +                       phy_found = 1;
> > +               }
> 
> This is clunky, and you are duplicating what of_mdiobus_register() will do for
> you, but since you are not using the standard Ethernet PHY device tree node,
> you could not use that code. So please use the standard Ethernet PHY device
> tree node such that you can remove that code and leverage it instead.
I'll consider it. but I think after this patch set.

> --
> Florian

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Florian Fainelli March 18, 2014, 10:24 p.m. UTC | #5
2014-03-18 15:16 GMT-07:00 Byungho An <bh74.an@samsung.com>:
> Florian Fainelli <f.fainelli@gmail.com> wrote:
>> 2014-03-18 11:19 GMT-07:00 Byungho An <bh74.an@samsung.com>:
>> > From: Siva Reddy <siva.kallam@samsung.com>
>> >
>> > This patch adds support for Samsung 10Gb ethernet driver(sxgbe).
>> >
>> > - sxgbe core initialization
>> > - Tx and Rx support
>> > - MDIO support
>> > - ISRs for Tx and Rx
>> > - ifconfig support to driver
>>
>> Too many files to review at once, the diffstat was around 5000+ lines!
>> You should split this into logical parts, or just submit the basic bits for now and
>> add the features later.
> Yes. but I think it is one logically, after this patch there won't be much code at once.

Since you are adding multiple objects to the Makefile at once, you
could very well split the patches to reflect that and submit one
object as a separate patch. Also, sometimes, even if the driver is
feature complete, it helps submitting the basic support first, and
then start adding new features to it progressively.

>
>>
>> [snip]
>>
>> > +       ret = register_netdev(ndev);
>> > +       if (ret) {
>> > +               pr_err("%s: ERROR %i registering the device\n", __func__, ret);
>> > +               goto error_netdev_register;
>> > +       }
>> > +
>> > +       priv->sxgbe_clk = clk_get(priv->device, SXGBE_RESOURCE_NAME);
>> > +       if (IS_ERR(priv->sxgbe_clk)) {
>> > +               netdev_warn(ndev, "%s: warning: cannot get CSR clock\n",
>> > +                           __func__);
>> > +               goto error_clk_get;
>> > +       }
>>
>> This is racy, after register_netdev() is called, the network stack is free to use
>> the interface, which means that as much as possible needs to be initialized
>> before you call it, including clocks, and MDIO.
>>
>> > +
>> > +       /* If a specific clk_csr value is passed from the platform
>> > +        * this means that the CSR Clock Range selection cannot be
>> > +        * changed at run-time and it is fixed. Viceversa the driver'll try to
>> > +        * set the MDC clock dynamically according to the csr actual
>> > +        * clock input.
>> > +        */
>> > +       if (!priv->plat->clk_csr)
>> > +               sxgbe_clk_csr_set(priv);
>> > +       else
>> > +               priv->clk_csr = priv->plat->clk_csr;
>> > +
>> > +       /* MDIO bus Registration */
>> > +       ret = sxgbe_mdio_register(ndev);
>> > +       if (ret < 0) {
>> > +               netdev_dbg(ndev, "%s: MDIO bus (id: %d) registration failed\n",
>> > +                          __func__, priv->plat->bus_id);
>> > +               goto error_mdio_register;
>> > +       }
>>
>> Don't do this, register your MDIO bus before calling register_netdev().
> OK.
>
>>
>> > +
>> > +       sxgbe_check_ether_addr(priv);
>> > +
>> > +       return priv;
>> > +
>> > +error_mdio_register:
>> > +       clk_put(priv->sxgbe_clk);
>> > +error_clk_get:
>> > +       unregister_netdev(ndev);
>> > +error_netdev_register:
>> > +       netif_napi_del(&priv->napi);
>> > +error_free_netdev:
>> > +       free_netdev(ndev);
>> > +
>> > +       return NULL;
>> > +}
>> > +
>> > +/**
>> > + * sxgbe_dvr_remove
>> > + * @ndev: net device pointer
>> > + * Description: this function resets the TX/RX processes, disables
>> > +the MAC RX/TX
>> > + * changes the link status, releases the DMA descriptor rings.
>> > + */
>> > +int sxgbe_dvr_remove(struct net_device *ndev) {
>> > +       struct sxgbe_priv_data *priv = netdev_priv(ndev);
>> > +
>> > +       netdev_info(ndev, "%s: removing driver\n", __func__);
>> > +
>> > +       priv->hw->dma->stop_rx(priv->ioaddr, SXGBE_RX_QUEUES);
>> > +       priv->hw->dma->stop_tx(priv->ioaddr, SXGBE_TX_QUEUES);
>> > +
>> > +       priv->hw->mac->enable_tx(priv->ioaddr, false);
>> > +       priv->hw->mac->enable_rx(priv->ioaddr, false);
>> > +
>> > +       netif_napi_del(&priv->napi);
>> > +
>> > +       sxgbe_mdio_unregister(ndev);
>> > +
>> > +       netif_carrier_off(ndev);
>>
>> This is not required, both the PHY library and the network stack will do that for
>> you.
> You mean netif_napi_del and netif_carrier_off? or all of sxgbe_dvr_remove function?
> I think dma/mac control are needed.

I mean netif_carrier_off() is not required, everything else is.

>
>>
>> [snip]
>>
>> > +       /* register with kernel subsystem */
>> > +       err = mdiobus_register(mdio_bus);
>> > +       if (err != 0) {
>> > +               netdev_err(ndev, "mdiobus register failed\n");
>> > +               goto mdiobus_err;
>> > +       }
>> > +
>> > +       for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
>> > +               struct phy_device *phy = mdio_bus->phy_map[phy_addr];
>> > +               if (phy) {
>> > +                       char irq_num[4];
>> > +                       char *irq_str;
>> > +                       /* If an IRQ was provided to be assigned after
>> > +                        * the bus probe, do it here.
>> > +                        */
>> > +                       if ((mdio_data->irqs == NULL) &&
>> > +                           (mdio_data->probed_phy_irq > 0)) {
>> > +                               irqlist[phy_addr] = mdio_data->probed_phy_irq;
>> > +                               phy->irq = mdio_data->probed_phy_irq;
>> > +                       }
>> > +
>> > +                       /* If we're  going to bind the MAC to this PHY bus,
>> > +                        * and no PHY number was provided to the MAC,
>> > +                        * use the one probed here.
>> > +                        */
>> > +                       if (priv->plat->phy_addr == -1)
>> > +                               priv->plat->phy_addr = phy_addr;
>> > +
>> > +                       act = (priv->plat->phy_addr == phy_addr);
>> > +                       switch (phy->irq) {
>> > +                       case PHY_POLL:
>> > +                               irq_str = "POLL";
>> > +                               break;
>> > +                       case PHY_IGNORE_INTERRUPT:
>> > +                               irq_str = "IGNORE";
>> > +                               break;
>> > +                       default:
>> > +                               sprintf(irq_num, "%d", phy->irq);
>> > +                               irq_str = irq_num;
>> > +                               break;
>> > +                       }
>> > +                       netdev_info(ndev, "PHY ID %08x at %d IRQ %s (%s)%s\n",
>> > +                                   phy->phy_id, phy_addr, irq_str,
>> > +                                   dev_name(&phy->dev), act ? " active" : "");
>> > +                       phy_found = 1;
>> > +               }
>>
>> This is clunky, and you are duplicating what of_mdiobus_register() will do for
>> you, but since you are not using the standard Ethernet PHY device tree node,
>> you could not use that code. So please use the standard Ethernet PHY device
>> tree node such that you can remove that code and leverage it instead.
> I'll consider it. but I think after this patch set.

Humm, I would rather you do this know this will eliminate all this
code in your driver which duplicates an existing function in the
kernel.
Byungho An March 19, 2014, 5:22 a.m. UTC | #6
Florian Fainelli <f.fainelli@gmail.com>  wrote :
> 2014-03-18 15:16 GMT-07:00 Byungho An <bh74.an@samsung.com>:
> > Florian Fainelli <f.fainelli@gmail.com> wrote:
> >> 2014-03-18 11:19 GMT-07:00 Byungho An <bh74.an@samsung.com>:
> >> > From: Siva Reddy <siva.kallam@samsung.com>
> >> >
> >> > This patch adds support for Samsung 10Gb ethernet driver(sxgbe).
> >> >
> >> > - sxgbe core initialization
> >> > - Tx and Rx support
> >> > - MDIO support
> >> > - ISRs for Tx and Rx
> >> > - ifconfig support to driver
> >>
> >> Too many files to review at once, the diffstat was around 5000+ lines!
> >> You should split this into logical parts, or just submit the basic
> >> bits for now and add the features later.
> > Yes. but I think it is one logically, after this patch there won't be much code at once.
> 
> Since you are adding multiple objects to the Makefile at once, you could very well split the patches to reflect that and submit one
> object as a separate patch. Also, sometimes, even if the driver is feature complete, it helps submitting the basic support first, and
> then start adding new features to it progressively.
But it is basic framework itself.
Since this #2 patch contains changes that are required for its basic functionality, it is not easy to split.

> 
> >
> >>
> >> [snip]
> >>
> >> > +       ret = register_netdev(ndev);
> >> > +       if (ret) {
> >> > +               pr_err("%s: ERROR %i registering the device\n", __func__, ret);
> >> > +               goto error_netdev_register;
> >> > +       }
> >> > +
> >> > +       priv->sxgbe_clk = clk_get(priv->device, SXGBE_RESOURCE_NAME);
> >> > +       if (IS_ERR(priv->sxgbe_clk)) {
> >> > +               netdev_warn(ndev, "%s: warning: cannot get CSR clock\n",
> >> > +                           __func__);
> >> > +               goto error_clk_get;
> >> > +       }
> >>
> >> This is racy, after register_netdev() is called, the network stack is
> >> free to use the interface, which means that as much as possible needs
> >> to be initialized before you call it, including clocks, and MDIO.
> >>
> >> > +
> >> > +       /* If a specific clk_csr value is passed from the platform
> >> > +        * this means that the CSR Clock Range selection cannot be
> >> > +        * changed at run-time and it is fixed. Viceversa the driver'll try to
> >> > +        * set the MDC clock dynamically according to the csr actual
> >> > +        * clock input.
> >> > +        */
> >> > +       if (!priv->plat->clk_csr)
> >> > +               sxgbe_clk_csr_set(priv);
> >> > +       else
> >> > +               priv->clk_csr = priv->plat->clk_csr;
> >> > +
> >> > +       /* MDIO bus Registration */
> >> > +       ret = sxgbe_mdio_register(ndev);
> >> > +       if (ret < 0) {
> >> > +               netdev_dbg(ndev, "%s: MDIO bus (id: %d) registration failed\n",
> >> > +                          __func__, priv->plat->bus_id);
> >> > +               goto error_mdio_register;
> >> > +       }
> >>
> >> Don't do this, register your MDIO bus before calling register_netdev().
> > OK.
> >
> >>
> >> > +
> >> > +       sxgbe_check_ether_addr(priv);
> >> > +
> >> > +       return priv;
> >> > +
> >> > +error_mdio_register:
> >> > +       clk_put(priv->sxgbe_clk);
> >> > +error_clk_get:
> >> > +       unregister_netdev(ndev);
> >> > +error_netdev_register:
> >> > +       netif_napi_del(&priv->napi);
> >> > +error_free_netdev:
> >> > +       free_netdev(ndev);
> >> > +
> >> > +       return NULL;
> >> > +}
> >> > +
> >> > +/**
> >> > + * sxgbe_dvr_remove
> >> > + * @ndev: net device pointer
> >> > + * Description: this function resets the TX/RX processes, disables
> >> > +the MAC RX/TX
> >> > + * changes the link status, releases the DMA descriptor rings.
> >> > + */
> >> > +int sxgbe_dvr_remove(struct net_device *ndev) {
> >> > +       struct sxgbe_priv_data *priv = netdev_priv(ndev);
> >> > +
> >> > +       netdev_info(ndev, "%s: removing driver\n", __func__);
> >> > +
> >> > +       priv->hw->dma->stop_rx(priv->ioaddr, SXGBE_RX_QUEUES);
> >> > +       priv->hw->dma->stop_tx(priv->ioaddr, SXGBE_TX_QUEUES);
> >> > +
> >> > +       priv->hw->mac->enable_tx(priv->ioaddr, false);
> >> > +       priv->hw->mac->enable_rx(priv->ioaddr, false);
> >> > +
> >> > +       netif_napi_del(&priv->napi);
> >> > +
> >> > +       sxgbe_mdio_unregister(ndev);
> >> > +
> >> > +       netif_carrier_off(ndev);
> >>
> >> This is not required, both the PHY library and the network stack will
> >> do that for you.
> > You mean netif_napi_del and netif_carrier_off? or all of sxgbe_dvr_remove function?
> > I think dma/mac control are needed.
> 
> I mean netif_carrier_off() is not required, everything else is.
> 
> >
> >>
> >> [snip]
> >>
> >> > +       /* register with kernel subsystem */
> >> > +       err = mdiobus_register(mdio_bus);
> >> > +       if (err != 0) {
> >> > +               netdev_err(ndev, "mdiobus register failed\n");
> >> > +               goto mdiobus_err;
> >> > +       }
> >> > +
> >> > +       for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
> >> > +               struct phy_device *phy = mdio_bus->phy_map[phy_addr];
> >> > +               if (phy) {
> >> > +                       char irq_num[4];
> >> > +                       char *irq_str;
> >> > +                       /* If an IRQ was provided to be assigned after
> >> > +                        * the bus probe, do it here.
> >> > +                        */
> >> > +                       if ((mdio_data->irqs == NULL) &&
> >> > +                           (mdio_data->probed_phy_irq > 0)) {
> >> > +                               irqlist[phy_addr] = mdio_data->probed_phy_irq;
> >> > +                               phy->irq = mdio_data->probed_phy_irq;
> >> > +                       }
> >> > +
> >> > +                       /* If we're  going to bind the MAC to this PHY bus,
> >> > +                        * and no PHY number was provided to the MAC,
> >> > +                        * use the one probed here.
> >> > +                        */
> >> > +                       if (priv->plat->phy_addr == -1)
> >> > +                               priv->plat->phy_addr = phy_addr;
> >> > +
> >> > +                       act = (priv->plat->phy_addr == phy_addr);
> >> > +                       switch (phy->irq) {
> >> > +                       case PHY_POLL:
> >> > +                               irq_str = "POLL";
> >> > +                               break;
> >> > +                       case PHY_IGNORE_INTERRUPT:
> >> > +                               irq_str = "IGNORE";
> >> > +                               break;
> >> > +                       default:
> >> > +                               sprintf(irq_num, "%d", phy->irq);
> >> > +                               irq_str = irq_num;
> >> > +                               break;
> >> > +                       }
> >> > +                       netdev_info(ndev, "PHY ID %08x at %d IRQ %s (%s)%s\n",
> >> > +                                   phy->phy_id, phy_addr, irq_str,
> >> > +                                   dev_name(&phy->dev), act ? " active" : "");
> >> > +                       phy_found = 1;
> >> > +               }
> >>
> >> This is clunky, and you are duplicating what of_mdiobus_register()
> >> will do for you, but since you are not using the standard Ethernet
> >> PHY device tree node, you could not use that code. So please use the
> >> standard Ethernet PHY device tree node such that you can remove that code and leverage it instead.
> > I'll consider it. but I think after this patch set.
> 
> Humm, I would rather you do this know this will eliminate all this code in your driver which duplicates an existing function in the kernel.
> --
> Florian
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More
> majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 506b024..d4545fa 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -149,6 +149,7 @@  config S6GMAC
 	  To compile this driver as a module, choose M here. The module
 	  will be called s6gmac.
 
+source "drivers/net/ethernet/samsung/Kconfig"
 source "drivers/net/ethernet/seeq/Kconfig"
 source "drivers/net/ethernet/silan/Kconfig"
 source "drivers/net/ethernet/sis/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index c0b8789..2a53f84 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -60,6 +60,7 @@  obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
 obj-$(CONFIG_SH_ETH) += renesas/
 obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
 obj-$(CONFIG_S6GMAC) += s6gmac.o
+obj-$(CONFIG_NET_VENDOR_SAMSUNG) += samsung/
 obj-$(CONFIG_NET_VENDOR_SEEQ) += seeq/
 obj-$(CONFIG_NET_VENDOR_SILAN) += silan/
 obj-$(CONFIG_NET_VENDOR_SIS) += sis/
diff --git a/drivers/net/ethernet/samsung/Kconfig b/drivers/net/ethernet/samsung/Kconfig
new file mode 100644
index 0000000..b78d669
--- /dev/null
+++ b/drivers/net/ethernet/samsung/Kconfig
@@ -0,0 +1,20 @@ 
+#
+# Samsung Ethernet device configuration
+#
+
+config NET_VENDOR_SAMSUNG
+	bool "Samsung Ethernet device"
+	default y
+	depends on HAS_IOMEM && HAS_DMA
+	select PHYLIB
+	select CRC32
+	select PTP_1588_CLOCK
+	---help---
+	  This is the driver for the SXGBE 10G Ethernet IP block found on Samsung
+	  platforms.
+
+if NET_VENDOR_SAMSUNG
+
+source "drivers/net/ethernet/samsung/sxgbe/Kconfig"
+
+endif # NET_VENDOR_SAMSUNG
diff --git a/drivers/net/ethernet/samsung/Makefile b/drivers/net/ethernet/samsung/Makefile
new file mode 100644
index 0000000..1773c29
--- /dev/null
+++ b/drivers/net/ethernet/samsung/Makefile
@@ -0,0 +1,5 @@ 
+#
+# Makefile for the Samsung Ethernet device drivers.
+#
+
+obj-$(CONFIG_SXGBE_ETH) += sxgbe/
diff --git a/drivers/net/ethernet/samsung/sxgbe/Kconfig b/drivers/net/ethernet/samsung/sxgbe/Kconfig
new file mode 100644
index 0000000..d79288c
--- /dev/null
+++ b/drivers/net/ethernet/samsung/sxgbe/Kconfig
@@ -0,0 +1,9 @@ 
+config SXGBE_ETH
+	tristate "Samsung 10G/2.5G/1G SXGBE Ethernet driver"
+	depends on HAS_IOMEM && HAS_DMA
+	select PHYLIB
+	select CRC32
+	select PTP_1588_CLOCK
+	---help---
+	  This is the driver for the SXGBE 10G Ethernet IP block found on Samsung
+	  platforms.
diff --git a/drivers/net/ethernet/samsung/sxgbe/Makefile b/drivers/net/ethernet/samsung/sxgbe/Makefile
new file mode 100644
index 0000000..dcc80b9
--- /dev/null
+++ b/drivers/net/ethernet/samsung/sxgbe/Makefile
@@ -0,0 +1,4 @@ 
+obj-$(CONFIG_SXGBE_ETH) += samsung-sxgbe.o
+samsung-sxgbe-objs:= sxgbe_platform.o sxgbe_main.o sxgbe_desc.o \
+		sxgbe_dma.o sxgbe_core.o sxgbe_mtl.o  sxgbe_mdio.o \
+		sxgbe_ethtool.o sxgbe_xpcs.o $(samsung-sxgbe-y)
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h b/drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h
new file mode 100644
index 0000000..587b691
--- /dev/null
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h
@@ -0,0 +1,459 @@ 
+/* 10G controller driver for Samsung SoCs
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Siva Reddy Kallam <siva.kallam@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SXGBE_COMMON_H__
+#define __SXGBE_COMMON_H__
+
+/* forward references */
+struct sxgbe_desc_ops;
+struct sxgbe_dma_ops;
+struct sxgbe_mtl_ops;
+
+#define SXGBE_RESOURCE_NAME	"sam_sxgbeeth"
+#define DRV_MODULE_VERSION	"November_2013"
+
+/* MAX HW feature words */
+#define SXGBE_HW_WORDS 3
+
+#define SXGBE_RX_COE_NONE	0
+
+/* CSR Frequency Access Defines*/
+#define SXGBE_CSR_F_150M	150000000
+#define SXGBE_CSR_F_250M	250000000
+#define SXGBE_CSR_F_300M	300000000
+#define SXGBE_CSR_F_350M	350000000
+#define SXGBE_CSR_F_400M	400000000
+#define SXGBE_CSR_F_500M	500000000
+
+/* pause time */
+#define SXGBE_PAUSE_TIME 0x200
+
+/* tx queues */
+#define SXGBE_TX_QUEUES   8
+#define SXGBE_RX_QUEUES   16
+
+/* Max/Min RI Watchdog Timer count value */
+#define SXGBE_MAX_DMA_RIWT	0xff
+#define SXGBE_MIN_DMA_RIWT	0x20
+
+/* Tx coalesce parameters */
+#define SXGBE_COAL_TX_TIMER	40000
+#define SXGBE_MAX_COAL_TX_TICK	100000
+#define SXGBE_TX_MAX_FRAMES	512
+#define SXGBE_TX_FRAMES	128
+
+/* SXGBE TX FIFO is 8K, Rx FIFO is 16K */
+#define BUF_SIZE_16KiB 16384
+#define BUF_SIZE_8KiB 8192
+#define BUF_SIZE_4KiB 4096
+#define BUF_SIZE_2KiB 2048
+
+#define SXGBE_DEFAULT_LIT_LS	0x3E8
+#define SXGBE_DEFAULT_TWT_LS	0x0
+
+/* Flow Control defines */
+#define SXGBE_FLOW_OFF		0
+#define SXGBE_FLOW_RX		1
+#define SXGBE_FLOW_TX		2
+#define SXGBE_FLOW_AUTO		(SXGBE_FLOW_TX | SXGBE_FLOW_RX)
+
+#define SF_DMA_MODE 1		/* DMA STORE-AND-FORWARD Operation Mode */
+
+/* errors */
+#define RX_GMII_ERR		0x01
+#define RX_WATCHDOG_ERR		0x02
+#define RX_CRC_ERR		0x03
+#define RX_GAINT_ERR		0x04
+#define RX_IP_HDR_ERR		0x05
+#define RX_PAYLOAD_ERR		0x06
+#define RX_OVERFLOW_ERR		0x07
+
+/* pkt type */
+#define RX_LEN_PKT		0x00
+#define RX_MACCTL_PKT		0x01
+#define RX_DCBCTL_PKT		0x02
+#define RX_ARP_PKT		0x03
+#define RX_OAM_PKT		0x04
+#define RX_UNTAG_PKT		0x05
+#define RX_OTHER_PKT		0x07
+#define RX_SVLAN_PKT		0x08
+#define RX_CVLAN_PKT		0x09
+#define RX_DVLAN_OCVLAN_ICVLAN_PKT		0x0A
+#define RX_DVLAN_OSVLAN_ISVLAN_PKT		0x0B
+#define RX_DVLAN_OSVLAN_ICVLAN_PKT		0x0C
+#define RX_DVLAN_OCVLAN_ISVLAN_PKT		0x0D
+
+#define RX_NOT_IP_PKT		0x00
+#define RX_IPV4_TCP_PKT		0x01
+#define RX_IPV4_UDP_PKT		0x02
+#define RX_IPV4_ICMP_PKT	0x03
+#define RX_IPV4_UNKNOWN_PKT	0x07
+#define RX_IPV6_TCP_PKT		0x09
+#define RX_IPV6_UDP_PKT		0x0A
+#define RX_IPV6_ICMP_PKT	0x0B
+#define RX_IPV6_UNKNOWN_PKT	0x0F
+
+#define RX_NO_PTP		0x00
+#define RX_PTP_SYNC		0x01
+#define RX_PTP_FOLLOW_UP	0x02
+#define RX_PTP_DELAY_REQ	0x03
+#define RX_PTP_DELAY_RESP	0x04
+#define RX_PTP_PDELAY_REQ	0x05
+#define RX_PTP_PDELAY_RESP	0x06
+#define RX_PTP_PDELAY_FOLLOW_UP	0x07
+#define RX_PTP_ANNOUNCE		0x08
+#define RX_PTP_MGMT		0x09
+#define RX_PTP_SIGNAL		0x0A
+#define RX_PTP_RESV_MSG		0x0F
+
+enum dma_irq_status {
+	tx_hard_error	= BIT(0),
+	tx_bump_tc	= BIT(1),
+	handle_tx	= BIT(2),
+	rx_hard_error	= BIT(3),
+	rx_bump_tc	= BIT(4),
+	handle_rx	= BIT(5),
+};
+
+#define NETIF_F_HW_VLAN_ALL     (NETIF_F_HW_VLAN_CTAG_RX |	\
+				 NETIF_F_HW_VLAN_STAG_RX |	\
+				 NETIF_F_HW_VLAN_CTAG_TX |	\
+				 NETIF_F_HW_VLAN_STAG_TX |	\
+				 NETIF_F_HW_VLAN_CTAG_FILTER |	\
+				 NETIF_F_HW_VLAN_STAG_FILTER)
+
+/* MMC control defines */
+#define SXGBE_MMC_CTRL_CNT_FRZ  0x00000008
+
+/* SXGBE HW ADDR regs */
+#define SXGBE_ADDR_HIGH(reg)    (((reg > 15) ? 0x00000800 : 0x00000040) + \
+				 (reg * 8))
+#define SXGBE_ADDR_LOW(reg)     (((reg > 15) ? 0x00000804 : 0x00000044) + \
+				 (reg * 8))
+#define SXGBE_MAX_PERFECT_ADDRESSES 32 /* Maximum unicast perfect filtering */
+#define SXGBE_FRAME_FILTER       0x00000004      /* Frame Filter */
+
+/* SXGBE Frame Filter defines */
+#define SXGBE_FRAME_FILTER_PR    0x00000001      /* Promiscuous Mode */
+#define SXGBE_FRAME_FILTER_HUC   0x00000002      /* Hash Unicast */
+#define SXGBE_FRAME_FILTER_HMC   0x00000004      /* Hash Multicast */
+#define SXGBE_FRAME_FILTER_DAIF  0x00000008      /* DA Inverse Filtering */
+#define SXGBE_FRAME_FILTER_PM    0x00000010      /* Pass all multicast */
+#define SXGBE_FRAME_FILTER_DBF   0x00000020      /* Disable Broadcast frames */
+#define SXGBE_FRAME_FILTER_SAIF  0x00000100      /* Inverse Filtering */
+#define SXGBE_FRAME_FILTER_SAF   0x00000200      /* Source Address Filter */
+#define SXGBE_FRAME_FILTER_HPF   0x00000400      /* Hash or perfect Filter */
+#define SXGBE_FRAME_FILTER_RA    0x80000000      /* Receive all mode */
+
+#define SXGBE_HASH_TABLE_SIZE    64
+#define SXGBE_HASH_HIGH          0x00000008      /* Multicast Hash Table High */
+#define SXGBE_HASH_LOW           0x0000000c      /* Multicast Hash Table Low */
+
+#define SXGBE_HI_REG_AE          0x80000000
+
+/* Minimum and maximum MTU */
+#define MIN_MTU         68
+#define MAX_MTU         9000
+
+#define SXGBE_FOR_EACH_QUEUE(max_queues, queue_num)			\
+	for (queue_num = 0; queue_num < max_queues; queue_num++)
+
+/* sxgbe statistics counters */
+struct sxgbe_extra_stats {
+	/* TX/RX IRQ events */
+	unsigned long tx_underflow_irq;
+	unsigned long tx_process_stopped_irq;
+	unsigned long tx_ctxt_desc_err;
+	unsigned long tx_threshold;
+	unsigned long rx_threshold;
+	unsigned long tx_pkt_n;
+	unsigned long rx_pkt_n;
+	unsigned long normal_irq_n;
+	unsigned long tx_normal_irq_n;
+	unsigned long rx_normal_irq_n;
+	unsigned long napi_poll;
+	unsigned long tx_clean;
+	unsigned long tx_reset_ic_bit;
+	unsigned long rx_process_stopped_irq;
+	unsigned long rx_underflow_irq;
+
+	/* Bus access errors */
+	unsigned long fatal_bus_error_irq;
+	unsigned long tx_read_transfer_err;
+	unsigned long tx_write_transfer_err;
+	unsigned long tx_desc_access_err;
+	unsigned long tx_buffer_access_err;
+	unsigned long tx_data_transfer_err;
+	unsigned long rx_read_transfer_err;
+	unsigned long rx_write_transfer_err;
+	unsigned long rx_desc_access_err;
+	unsigned long rx_buffer_access_err;
+	unsigned long rx_data_transfer_err;
+
+	/* RX specific */
+	/* L2 error */
+	unsigned long rx_code_gmii_err;
+	unsigned long rx_watchdog_err;
+	unsigned long rx_crc_err;
+	unsigned long rx_gaint_pkt_err;
+	unsigned long ip_hdr_err;
+	unsigned long ip_payload_err;
+	unsigned long overflow_error;
+
+	/* L2 Pkt type */
+	unsigned long len_pkt;
+	unsigned long mac_ctl_pkt;
+	unsigned long dcb_ctl_pkt;
+	unsigned long arp_pkt;
+	unsigned long oam_pkt;
+	unsigned long untag_okt;
+	unsigned long other_pkt;
+	unsigned long svlan_tag_pkt;
+	unsigned long cvlan_tag_pkt;
+	unsigned long dvlan_ocvlan_icvlan_pkt;
+	unsigned long dvlan_osvlan_isvlan_pkt;
+	unsigned long dvlan_osvlan_icvlan_pkt;
+	unsigned long dvan_ocvlan_icvlan_pkt;
+
+	/* L3/L4 Pkt type */
+	unsigned long not_ip_pkt;
+	unsigned long ip4_tcp_pkt;
+	unsigned long ip4_udp_pkt;
+	unsigned long ip4_icmp_pkt;
+	unsigned long ip4_unknown_pkt;
+	unsigned long ip6_tcp_pkt;
+	unsigned long ip6_udp_pkt;
+	unsigned long ip6_icmp_pkt;
+	unsigned long ip6_unknown_pkt;
+
+	/* Filter specific */
+	unsigned long vlan_filter_match;
+	unsigned long sa_filter_fail;
+	unsigned long da_filter_fail;
+	unsigned long hash_filter_pass;
+	unsigned long l3_filter_match;
+	unsigned long l4_filter_match;
+
+	/* RX context specific */
+	unsigned long timestamp_dropped;
+	unsigned long rx_msg_type_no_ptp;
+	unsigned long rx_ptp_type_sync;
+	unsigned long rx_ptp_type_follow_up;
+	unsigned long rx_ptp_type_delay_req;
+	unsigned long rx_ptp_type_delay_resp;
+	unsigned long rx_ptp_type_pdelay_req;
+	unsigned long rx_ptp_type_pdelay_resp;
+	unsigned long rx_ptp_type_pdelay_follow_up;
+	unsigned long rx_ptp_announce;
+	unsigned long rx_ptp_mgmt;
+	unsigned long rx_ptp_signal;
+	unsigned long rx_ptp_resv_msg_type;
+};
+
+struct mac_link {
+	int port;
+	int duplex;
+	int speed;
+};
+
+struct mii_regs {
+	unsigned int addr;	/* MII Address */
+	unsigned int data;	/* MII Data */
+};
+
+struct sxgbe_core_ops {
+	/* MAC core initialization */
+	void (*core_init)(void __iomem *ioaddr);
+	/* Dump MAC registers */
+	void (*dump_regs)(void __iomem *ioaddr);
+	/* Handle extra events on specific interrupts hw dependent */
+	int (*host_irq_status)(void __iomem *ioaddr,
+			       struct sxgbe_extra_stats *x);
+	/* Set power management mode (e.g. magic frame) */
+	void (*pmt)(void __iomem *ioaddr, unsigned long mode);
+	/* Set/Get Unicast MAC addresses */
+	void (*set_umac_addr)(void __iomem *ioaddr, unsigned char *addr,
+			      unsigned int reg_n);
+	void (*get_umac_addr)(void __iomem *ioaddr, unsigned char *addr,
+			      unsigned int reg_n);
+	void (*enable_rx)(void __iomem *ioaddr, bool enable);
+	void (*enable_tx)(void __iomem *ioaddr, bool enable);
+
+	/* controller version specific operations */
+	int (*get_controller_version)(void __iomem *ioaddr);
+
+	/* If supported then get the optional core features */
+	unsigned int (*get_hw_feature)(void __iomem *ioaddr,
+				       unsigned char feature_index);
+	/* adjust SXGBE speed */
+	void (*set_speed)(void __iomem *ioaddr, unsigned char speed);
+};
+
+const struct sxgbe_core_ops *sxgbe_get_core_ops(void);
+
+struct sxgbe_ops {
+	const struct sxgbe_core_ops *mac;
+	const struct sxgbe_desc_ops *desc;
+	const struct sxgbe_dma_ops *dma;
+	const struct sxgbe_mtl_ops *mtl;
+	struct mii_regs mii;	/* MII register Addresses */
+	struct mac_link link;
+	unsigned int ctrl_uid;
+	unsigned int ctrl_id;
+};
+
+/* SXGBE private data structures */
+struct sxgbe_tx_queue {
+	unsigned int irq_no;
+	struct sxgbe_priv_data *priv_ptr;
+	struct sxgbe_tx_norm_desc *dma_tx;
+	dma_addr_t dma_tx_phy;
+	dma_addr_t *tx_skbuff_dma;
+	struct sk_buff **tx_skbuff;
+	struct timer_list txtimer;
+	spinlock_t tx_lock;	/* lock for tx queues */
+	unsigned int cur_tx;
+	unsigned int dirty_tx;
+	u32 tx_count_frames;
+	u32 tx_coal_frames;
+	u32 tx_coal_timer;
+	int hwts_tx_en;
+	u8 queue_no;
+};
+
+struct sxgbe_rx_queue {
+	struct sxgbe_priv_data *priv_ptr;
+	struct sxgbe_rx_norm_desc *dma_rx;
+	struct sk_buff **rx_skbuff;
+	unsigned int cur_rx;
+	unsigned int dirty_rx;
+	unsigned int irq_no;
+	u32 rx_riwt;
+	dma_addr_t *rx_skbuff_dma;
+	dma_addr_t dma_rx_phy;
+	u8 queue_no;
+};
+
+/* SXGBE HW capabilities */
+struct sxgbe_hw_features {
+	/****** CAP [0] *******/
+	unsigned int pmt_remote_wake_up;
+	unsigned int pmt_magic_frame;
+	/* IEEE 1588-2008 */
+	unsigned int atime_stamp;
+
+	unsigned int tx_csum_offload;
+	unsigned int rx_csum_offload;
+	unsigned int multi_macaddr;
+	unsigned int tstamp_srcselect;
+	unsigned int sa_vlan_insert;
+
+	/****** CAP [1] *******/
+	unsigned int rxfifo_size;
+	unsigned int txfifo_size;
+	unsigned int atstmap_hword;
+	unsigned int dcb_enable;
+	unsigned int splithead_enable;
+	unsigned int tcpseg_offload;
+	unsigned int debug_mem;
+	unsigned int rss_enable;
+	unsigned int hash_tsize;
+	unsigned int l3l4_filer_size;
+
+	/* This value is in bytes and
+	 * as mentioned in HW features
+	 * of SXGBE data book
+	 */
+	unsigned int rx_mtl_qsize;
+	unsigned int tx_mtl_qsize;
+
+	/****** CAP [2] *******/
+	/* TX and RX number of channels */
+	unsigned int rx_mtl_queues;
+	unsigned int tx_mtl_queues;
+	unsigned int rx_dma_channels;
+	unsigned int tx_dma_channels;
+	unsigned int pps_output_count;
+	unsigned int aux_input_count;
+};
+
+struct sxgbe_priv_data {
+	/* DMA descriptos */
+	struct sxgbe_tx_queue *txq[SXGBE_TX_QUEUES];
+	struct sxgbe_rx_queue *rxq[SXGBE_RX_QUEUES];
+	u8 cur_rx_qnum;
+
+	unsigned int dma_tx_size;
+	unsigned int dma_rx_size;
+	unsigned int dma_buf_sz;
+	u32 rx_riwt;
+
+	struct napi_struct napi;
+
+	void __iomem *ioaddr;
+	struct net_device *dev;
+	struct device *device;
+	struct sxgbe_ops *hw;	/* sxgbe specific ops */
+	int no_csum_insertion;
+	int irq;
+	spinlock_t stats_lock;	/* lock for tx/rx statatics */
+
+	struct phy_device *phydev;
+	int oldlink;
+	int speed;
+	int oldduplex;
+	struct mii_bus *mii;
+	int mii_irq[PHY_MAX_ADDR];
+	u8 rx_pause;
+	u8 tx_pause;
+
+	struct sxgbe_extra_stats xstats;
+	struct sxgbe_plat_data *plat;
+	struct sxgbe_hw_features hw_cap;
+
+	u32 msg_enable;
+
+	struct clk *sxgbe_clk;
+	int clk_csr;
+	unsigned int mode;
+	unsigned int default_addend;
+
+	/* advanced time stamp support */
+	u32 adv_ts;
+	int use_riwt;
+
+	/* tc control */
+	int tx_tc;
+	int rx_tc;
+};
+
+/* Function prototypes */
+struct sxgbe_priv_data *sxgbe_dvr_probe(struct device *device,
+					struct sxgbe_plat_data *plat_dat,
+					void __iomem *addr);
+int sxgbe_dvr_remove(struct net_device *ndev);
+void sxgbe_set_ethtool_ops(struct net_device *netdev);
+int sxgbe_mdio_unregister(struct net_device *ndev);
+int sxgbe_mdio_register(struct net_device *ndev);
+int sxgbe_register_platform(void);
+void sxgbe_unregister_platform(void);
+
+#ifdef CONFIG_PM
+int sxgbe_suspend(struct net_device *ndev);
+int sxgbe_resume(struct net_device *ndev);
+int sxgbe_freeze(struct net_device *ndev);
+int sxgbe_restore(struct net_device *ndev);
+#endif /* CONFIG_PM */
+
+const struct sxgbe_mtl_ops *sxgbe_get_mtl_ops(void);
+
+#endif /* __SXGBE_COMMON_H__ */
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c
new file mode 100644
index 0000000..17eea58
--- /dev/null
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c
@@ -0,0 +1,157 @@ 
+/* 10G controller driver for Samsung SoCs
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Siva Reddy Kallam <siva.kallam@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/export.h>
+#include <linux/io.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+
+#include "sxgbe_common.h"
+#include "sxgbe_reg.h"
+
+/* MAC core initialization */
+static void sxgbe_core_init(void __iomem *ioaddr)
+{
+	u32 regval;
+	/* TX configuration */
+	regval = readl(ioaddr + SXGBE_CORE_TX_CONFIG_REG);
+	/* Other configurable parameters IFP, IPG, ISR, ISM
+	 * needs to be set if needed
+	 */
+	regval |= SXGBE_TX_JABBER_DISABLE;
+	writel(regval, ioaddr + SXGBE_CORE_TX_CONFIG_REG);
+
+	/* RX configuration */
+	regval = readl(ioaddr + SXGBE_CORE_RX_CONFIG_REG);
+	/* Other configurable parameters CST, SPEN, USP, GPSLCE
+	 * WD, LM, S2KP, HDSMS, GPSL, ELEN, ARPEN needs to be
+	 * set if needed
+	 */
+	regval |= SXGBE_RX_JUMBPKT_ENABLE | SXGBE_RX_ACS_ENABLE;
+	writel(regval, ioaddr + SXGBE_CORE_RX_CONFIG_REG);
+}
+
+/* Dump MAC registers */
+static void sxgbe_core_dump_regs(void __iomem *ioaddr)
+{
+}
+
+/* Handle extra events on specific interrupts hw dependent */
+static int sxgbe_core_host_irq_status(void __iomem *ioaddr,
+				      struct sxgbe_extra_stats *x)
+{
+	return 0;
+}
+
+/* Set power management mode (e.g. magic frame) */
+static void sxgbe_core_pmt(void __iomem *ioaddr, unsigned long mode)
+{
+}
+
+/* Set/Get Unicast MAC addresses */
+static void sxgbe_core_set_umac_addr(void __iomem *ioaddr, unsigned char *addr,
+				     unsigned int reg_n)
+{
+	u32 high_word, low_word;
+
+	high_word = (addr[5] << 8) || (addr[4]);
+	low_word = ((addr[3] << 24) || (addr[2] << 16) ||
+		    (addr[1] << 8) || (addr[0]));
+	writel(high_word, ioaddr + SXGBE_CORE_ADD_HIGHOFFSET(reg_n));
+	writel(low_word, ioaddr + SXGBE_CORE_ADD_LOWOFFSET(reg_n));
+}
+
+static void sxgbe_core_get_umac_addr(void __iomem *ioaddr, unsigned char *addr,
+				     unsigned int reg_n)
+{
+	u32 high_word, low_word;
+
+	high_word = readl(ioaddr + SXGBE_CORE_ADD_HIGHOFFSET(reg_n));
+	low_word = readl(ioaddr + SXGBE_CORE_ADD_LOWOFFSET(reg_n));
+
+	/* extract and assign address */
+	addr[5] = (high_word & 0x0000FF00) >> 8;
+	addr[4] = (high_word & 0x000000FF);
+	addr[3] = (low_word & 0xFF000000) >> 24;
+	addr[2] = (low_word & 0x00FF0000) >> 16;
+	addr[1] = (low_word & 0x0000FF00) >> 8;
+	addr[0] = (low_word & 0x000000FF);
+}
+
+static void sxgbe_enable_tx(void __iomem *ioaddr, bool enable)
+{
+	u32 tx_config;
+
+	tx_config = readl(ioaddr + SXGBE_CORE_TX_CONFIG_REG);
+	tx_config &= ~SXGBE_TX_ENABLE;
+
+	if (enable)
+		tx_config |= SXGBE_TX_ENABLE;
+	writel(tx_config, ioaddr + SXGBE_CORE_TX_CONFIG_REG);
+}
+
+static void sxgbe_enable_rx(void __iomem *ioaddr, bool enable)
+{
+	u32 rx_config;
+
+	rx_config = readl(ioaddr + SXGBE_CORE_RX_CONFIG_REG);
+	rx_config &= ~SXGBE_RX_ENABLE;
+
+	if (enable)
+		rx_config |= SXGBE_RX_ENABLE;
+	writel(rx_config, ioaddr + SXGBE_CORE_RX_CONFIG_REG);
+}
+
+static int sxgbe_get_controller_version(void __iomem *ioaddr)
+{
+	return readl(ioaddr + SXGBE_CORE_VERSION_REG);
+}
+
+/* If supported then get the optional core features */
+static unsigned int sxgbe_get_hw_feature(void __iomem *ioaddr,
+					 unsigned char feature_index)
+{
+	return readl(ioaddr + (SXGBE_CORE_HW_FEA_REG(feature_index)));
+}
+
+static void sxgbe_core_set_speed(void __iomem *ioaddr, unsigned char speed)
+{
+	u32 tx_cfg = readl(ioaddr + SXGBE_CORE_TX_CONFIG_REG);
+
+	/* clear the speed bits */
+	tx_cfg &= ~0x60000000;
+	tx_cfg |= (speed << SXGBE_SPEED_LSHIFT);
+
+	/* set the speed */
+	writel(tx_cfg, ioaddr + SXGBE_CORE_TX_CONFIG_REG);
+}
+
+const struct sxgbe_core_ops core_ops = {
+	.core_init = sxgbe_core_init,
+	.dump_regs = sxgbe_core_dump_regs,
+	.host_irq_status = sxgbe_core_host_irq_status,
+	.pmt = sxgbe_core_pmt,
+	.set_umac_addr = sxgbe_core_set_umac_addr,
+	.get_umac_addr = sxgbe_core_get_umac_addr,
+	.enable_rx = sxgbe_enable_rx,
+	.enable_tx = sxgbe_enable_tx,
+	.get_controller_version = sxgbe_get_controller_version,
+	.get_hw_feature = sxgbe_get_hw_feature,
+	.set_speed = sxgbe_core_set_speed,
+};
+
+const struct sxgbe_core_ops *sxgbe_get_core_ops(void)
+{
+	return &core_ops;
+}
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c
new file mode 100644
index 0000000..62d542c
--- /dev/null
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c
@@ -0,0 +1,515 @@ 
+/* 10G controller driver for Samsung SoCs
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Siva Reddy Kallam <siva.kallam@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/bitops.h>
+#include <linux/export.h>
+#include <linux/io.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+
+#include "sxgbe_common.h"
+#include "sxgbe_dma.h"
+#include "sxgbe_desc.h"
+
+/* DMA TX descriptor ring initialization */
+static void sxgbe_init_tx_desc(struct sxgbe_tx_norm_desc *p)
+{
+	p->tdes23.tx_rd_des23.own_bit = 0;
+}
+
+static void sxgbe_tx_desc_enable_tse(struct sxgbe_tx_norm_desc *p, u8 is_tse,
+				     u32 total_hdr_len, u32 tcp_hdr_len,
+				     u32 tcp_payload_len)
+{
+	p->tdes23.tx_rd_des23.tse_bit = is_tse;
+	p->tdes23.tx_rd_des23.buf1_size = total_hdr_len;
+	p->tdes23.tx_rd_des23.tcp_hdr_len = tcp_hdr_len / 4;
+	p->tdes23.tx_rd_des23.tx_pkt_len.tcp_payload_len  = tcp_payload_len;
+}
+
+/* Assign buffer lengths for descriptor */
+static void sxgbe_prepare_tx_desc(struct sxgbe_tx_norm_desc *p, u8 is_fd,
+				  int buf1_len, int pkt_len, int cksum)
+{
+	p->tdes23.tx_rd_des23.first_desc = is_fd;
+	p->tdes23.tx_rd_des23.buf1_size = buf1_len;
+
+	p->tdes23.tx_rd_des23.tx_pkt_len.cksum_pktlen.total_pkt_len = pkt_len;
+
+	if (cksum)
+		p->tdes23.tx_rd_des23.tx_pkt_len.cksum_pktlen.cksum_ctl =
+			cic_full;
+}
+
+/* Set VLAN control information */
+static void sxgbe_tx_vlanctl_desc(struct sxgbe_tx_norm_desc *p, int vlan_ctl)
+{
+	p->tdes23.tx_rd_des23.vlan_tag_ctl = vlan_ctl;
+}
+
+/* Set the owner of Normal descriptor */
+static void sxgbe_set_tx_owner(struct sxgbe_tx_norm_desc *p)
+{
+	p->tdes23.tx_rd_des23.own_bit = 1;
+}
+/* Get the owner of Normal descriptor */
+static int sxgbe_get_tx_owner(struct sxgbe_tx_norm_desc *p)
+{
+	return p->tdes23.tx_rd_des23.own_bit;
+}
+
+/* Invoked by the xmit function to close the tx descriptor */
+static void sxgbe_close_tx_desc(struct sxgbe_tx_norm_desc *p)
+{
+	p->tdes23.tx_rd_des23.last_desc = 1;
+	p->tdes23.tx_rd_des23.int_on_com = 1;
+}
+
+/* Clean the tx descriptor as soon as the tx irq is received */
+static void sxgbe_release_tx_desc(struct sxgbe_tx_norm_desc *p)
+{
+	memset(p, 0, sizeof(*p));
+}
+
+/* Clear interrupt on tx frame completion. When this bit is
+ * set an interrupt happens as soon as the frame is transmitted
+ */
+static void sxgbe_clear_tx_ic(struct sxgbe_tx_norm_desc *p)
+{
+	p->tdes23.tx_rd_des23.int_on_com = 0;
+}
+
+/* Last tx segment reports the transmit status */
+static int sxgbe_get_tx_ls(struct sxgbe_tx_norm_desc *p)
+{
+	return p->tdes23.tx_rd_des23.last_desc;
+}
+
+/* Get the buffer size from the descriptor */
+static int sxgbe_get_tx_len(struct sxgbe_tx_norm_desc *p)
+{
+	return p->tdes23.tx_rd_des23.buf1_size;
+}
+
+/* Set tx timestamp enable bit */
+static void sxgbe_tx_enable_tstamp(struct sxgbe_tx_norm_desc *p)
+{
+	p->tdes23.tx_rd_des23.timestmp_enable = 1;
+}
+
+/* get tx timestamp status */
+static int sxgbe_get_tx_timestamp_status(struct sxgbe_tx_norm_desc *p)
+{
+	return p->tdes23.tx_rd_des23.timestmp_enable;
+}
+
+/* TX Context Descripto Specific */
+static void sxgbe_tx_ctxt_desc_set_ctxt(struct sxgbe_tx_ctxt_desc *p)
+{
+	p->ctxt_bit = 1;
+}
+
+/* Set the owner of TX context descriptor */
+static void sxgbe_tx_ctxt_desc_set_owner(struct sxgbe_tx_ctxt_desc *p)
+{
+	p->own_bit = 1;
+}
+
+/* Get the owner of TX context descriptor */
+static int sxgbe_tx_ctxt_desc_get_owner(struct sxgbe_tx_ctxt_desc *p)
+{
+	return p->own_bit;
+}
+
+/* Set TX mss in TX context Descriptor */
+static void sxgbe_tx_ctxt_desc_set_mss(struct sxgbe_tx_ctxt_desc *p, u16 mss)
+{
+	p->maxseg_size = mss;
+}
+
+/* Get TX mss from TX context Descriptor */
+static int sxgbe_tx_ctxt_desc_get_mss(struct sxgbe_tx_ctxt_desc *p)
+{
+	return p->maxseg_size;
+}
+
+/* Set TX tcmssv in TX context Descriptor */
+static void sxgbe_tx_ctxt_desc_set_tcmssv(struct sxgbe_tx_ctxt_desc *p)
+{
+	p->tcmssv = 1;
+}
+
+/* Reset TX ostc in TX context Descriptor */
+static void sxgbe_tx_ctxt_desc_reset_ostc(struct sxgbe_tx_ctxt_desc *p)
+{
+	p->ostc = 0;
+}
+
+/* Set IVLAN information */
+static void sxgbe_tx_ctxt_desc_set_ivlantag(struct sxgbe_tx_ctxt_desc *p,
+					    int is_ivlanvalid, int ivlan_tag,
+					    int ivlan_ctl)
+{
+	if (is_ivlanvalid) {
+		p->ivlan_tag_valid = is_ivlanvalid;
+		p->ivlan_tag = ivlan_tag;
+		p->ivlan_tag_ctl = ivlan_ctl;
+	}
+}
+
+/* Return IVLAN Tag */
+static int sxgbe_tx_ctxt_desc_get_ivlantag(struct sxgbe_tx_ctxt_desc *p)
+{
+	return p->ivlan_tag;
+}
+
+/* Set VLAN Tag */
+static void sxgbe_tx_ctxt_desc_set_vlantag(struct sxgbe_tx_ctxt_desc *p,
+					   int is_vlanvalid, int vlan_tag)
+{
+	if (is_vlanvalid) {
+		p->vltag_valid = is_vlanvalid;
+		p->vlan_tag = vlan_tag;
+	}
+}
+
+/* Return VLAN Tag */
+static int sxgbe_tx_ctxt_desc_get_vlantag(struct sxgbe_tx_ctxt_desc *p)
+{
+	return p->vlan_tag;
+}
+
+/* Set Time stamp */
+static void sxgbe_tx_ctxt_desc_set_tstamp(struct sxgbe_tx_ctxt_desc *p,
+					  u8 ostc_enable, u64 tstamp)
+{
+	if (ostc_enable) {
+		p->ostc = ostc_enable;
+		p->tstamp_lo = (u32) tstamp;
+		p->tstamp_hi = (u32) (tstamp>>32);
+	}
+}
+/* Close TX context descriptor */
+static void sxgbe_tx_ctxt_desc_close(struct sxgbe_tx_ctxt_desc *p)
+{
+	p->own_bit = 1;
+}
+
+/* WB status of context descriptor */
+static int sxgbe_tx_ctxt_desc_get_cde(struct sxgbe_tx_ctxt_desc *p)
+{
+	return p->ctxt_desc_err;
+}
+
+/* DMA RX descriptor ring initialization */
+static void sxgbe_init_rx_desc(struct sxgbe_rx_norm_desc *p, int disable_rx_ic,
+			       int mode, int end)
+{
+	p->rdes23.rx_rd_des23.own_bit = 1;
+	if (disable_rx_ic)
+		p->rdes23.rx_rd_des23.int_on_com = disable_rx_ic;
+}
+
+/* Get RX own bit */
+static int sxgbe_get_rx_owner(struct sxgbe_rx_norm_desc *p)
+{
+	return p->rdes23.rx_rd_des23.own_bit;
+}
+
+/* Set RX own bit */
+static void sxgbe_set_rx_owner(struct sxgbe_rx_norm_desc *p)
+{
+	p->rdes23.rx_rd_des23.own_bit = 1;
+}
+
+/* Get the receive frame size */
+static int sxgbe_get_rx_frame_len(struct sxgbe_rx_norm_desc *p)
+{
+	return p->rdes23.rx_wb_des23.pkt_len;
+}
+
+/* Return first Descriptor status */
+static int sxgbe_get_rx_fd_status(struct sxgbe_rx_norm_desc *p)
+{
+	return p->rdes23.rx_wb_des23.first_desc;
+}
+
+/* Return Last Descriptor status */
+static int sxgbe_get_rx_ld_status(struct sxgbe_rx_norm_desc *p)
+{
+	return p->rdes23.rx_wb_des23.last_desc;
+}
+
+
+/* Return the RX status looking at the WB fields */
+static int sxgbe_rx_wbstatus(struct sxgbe_rx_norm_desc *p,
+			     struct sxgbe_extra_stats *x, int *checksum)
+{
+	int status = 0;
+
+	*checksum = CHECKSUM_UNNECESSARY;
+	if (p->rdes23.rx_wb_des23.err_summary) {
+		switch (p->rdes23.rx_wb_des23.err_l2_type) {
+		case RX_GMII_ERR:
+			status = -EINVAL;
+			x->rx_code_gmii_err++;
+			break;
+		case RX_WATCHDOG_ERR:
+			status = -EINVAL;
+			x->rx_watchdog_err++;
+			break;
+		case RX_CRC_ERR:
+			status = -EINVAL;
+			x->rx_crc_err++;
+			break;
+		case RX_GAINT_ERR:
+			status = -EINVAL;
+			x->rx_gaint_pkt_err++;
+			break;
+		case RX_IP_HDR_ERR:
+			*checksum = CHECKSUM_NONE;
+			x->ip_hdr_err++;
+			break;
+		case RX_PAYLOAD_ERR:
+			*checksum = CHECKSUM_NONE;
+			x->ip_payload_err++;
+			break;
+		case RX_OVERFLOW_ERR:
+			status = -EINVAL;
+			x->overflow_error++;
+			break;
+		default:
+			pr_err("Invalid Error type\n");
+			break;
+		}
+	} else {
+		switch (p->rdes23.rx_wb_des23.err_l2_type) {
+		case RX_LEN_PKT:
+			x->len_pkt++;
+			break;
+		case RX_MACCTL_PKT:
+			x->mac_ctl_pkt++;
+			break;
+		case RX_DCBCTL_PKT:
+			x->dcb_ctl_pkt++;
+			break;
+		case RX_ARP_PKT:
+			x->arp_pkt++;
+			break;
+		case RX_OAM_PKT:
+			x->oam_pkt++;
+			break;
+		case RX_UNTAG_PKT:
+			x->untag_okt++;
+			break;
+		case RX_OTHER_PKT:
+			x->other_pkt++;
+			break;
+		case RX_SVLAN_PKT:
+			x->svlan_tag_pkt++;
+			break;
+		case RX_CVLAN_PKT:
+			x->cvlan_tag_pkt++;
+			break;
+		case RX_DVLAN_OCVLAN_ICVLAN_PKT:
+			x->dvlan_ocvlan_icvlan_pkt++;
+			break;
+		case RX_DVLAN_OSVLAN_ISVLAN_PKT:
+			x->dvlan_osvlan_isvlan_pkt++;
+			break;
+		case RX_DVLAN_OSVLAN_ICVLAN_PKT:
+			x->dvlan_osvlan_icvlan_pkt++;
+			break;
+		case RX_DVLAN_OCVLAN_ISVLAN_PKT:
+			x->dvlan_ocvlan_icvlan_pkt++;
+			break;
+		default:
+			pr_err("Invalid L2 Packet type\n");
+			break;
+		}
+	}
+
+	/* L3/L4 Pkt type */
+	switch (p->rdes23.rx_wb_des23.layer34_pkt_type) {
+	case RX_NOT_IP_PKT:
+		x->not_ip_pkt++;
+		break;
+	case RX_IPV4_TCP_PKT:
+		x->ip4_tcp_pkt++;
+		break;
+	case RX_IPV4_UDP_PKT:
+		x->ip4_udp_pkt++;
+		break;
+	case RX_IPV4_ICMP_PKT:
+		x->ip4_icmp_pkt++;
+		break;
+	case RX_IPV4_UNKNOWN_PKT:
+		x->ip4_unknown_pkt++;
+		break;
+	case RX_IPV6_TCP_PKT:
+		x->ip6_tcp_pkt++;
+		break;
+	case RX_IPV6_UDP_PKT:
+		x->ip6_udp_pkt++;
+		break;
+	case RX_IPV6_ICMP_PKT:
+		x->ip6_icmp_pkt++;
+		break;
+	case RX_IPV6_UNKNOWN_PKT:
+		x->ip6_unknown_pkt++;
+		break;
+	default:
+		pr_err("Invalid L3/L4 Packet type\n");
+		break;
+	}
+
+	/* Filter */
+	if (p->rdes23.rx_wb_des23.vlan_filter_match)
+		x->vlan_filter_match++;
+
+	if (p->rdes23.rx_wb_des23.sa_filter_fail) {
+		status = -EINVAL;
+		x->sa_filter_fail++;
+	}
+	if (p->rdes23.rx_wb_des23.da_filter_fail) {
+		status = -EINVAL;
+		x->da_filter_fail++;
+	}
+	if (p->rdes23.rx_wb_des23.hash_filter_pass)
+		x->hash_filter_pass++;
+
+	if (p->rdes23.rx_wb_des23.l3_filter_match)
+		x->l3_filter_match++;
+
+	if (p->rdes23.rx_wb_des23.l4_filter_match)
+		x->l4_filter_match++;
+
+	return status;
+}
+
+/* Get own bit of context descriptor */
+static int sxgbe_get_rx_ctxt_owner(struct sxgbe_rx_ctxt_desc *p)
+{
+	return p->own_bit;
+}
+
+/* Set own bit for context descriptor */
+static void sxgbe_set_ctxt_rx_owner(struct sxgbe_rx_ctxt_desc *p)
+{
+	p->own_bit = 1;
+}
+
+
+/* Return the reception status looking at Context control information */
+static void sxgbe_rx_ctxt_wbstatus(struct sxgbe_rx_ctxt_desc *p,
+				   struct sxgbe_extra_stats *x)
+{
+	if (p->tstamp_dropped)
+		x->timestamp_dropped++;
+
+	/* ptp */
+	if (p->ptp_msgtype == RX_NO_PTP)
+		x->rx_msg_type_no_ptp++;
+	else if (p->ptp_msgtype == RX_PTP_SYNC)
+		x->rx_ptp_type_sync++;
+	else if (p->ptp_msgtype == RX_PTP_FOLLOW_UP)
+		x->rx_ptp_type_follow_up++;
+	else if (p->ptp_msgtype == RX_PTP_DELAY_REQ)
+		x->rx_ptp_type_delay_req++;
+	else if (p->ptp_msgtype == RX_PTP_DELAY_RESP)
+		x->rx_ptp_type_delay_resp++;
+	else if (p->ptp_msgtype == RX_PTP_PDELAY_REQ)
+		x->rx_ptp_type_pdelay_req++;
+	else if (p->ptp_msgtype == RX_PTP_PDELAY_RESP)
+		x->rx_ptp_type_pdelay_resp++;
+	else if (p->ptp_msgtype == RX_PTP_PDELAY_FOLLOW_UP)
+		x->rx_ptp_type_pdelay_follow_up++;
+	else if (p->ptp_msgtype == RX_PTP_ANNOUNCE)
+		x->rx_ptp_announce++;
+	else if (p->ptp_msgtype == RX_PTP_MGMT)
+		x->rx_ptp_mgmt++;
+	else if (p->ptp_msgtype == RX_PTP_SIGNAL)
+		x->rx_ptp_signal++;
+	else if (p->ptp_msgtype == RX_PTP_RESV_MSG)
+		x->rx_ptp_resv_msg_type++;
+}
+
+/* Get rx timestamp status */
+static int sxgbe_get_rx_ctxt_tstamp_status(struct sxgbe_rx_ctxt_desc *p)
+{
+	if ((p->tstamp_hi == 0xffffffff) && (p->tstamp_lo == 0xffffffff)) {
+		pr_err("Time stamp corrupted\n");
+		return 0;
+	}
+
+	return p->tstamp_available;
+}
+
+
+static u64 sxgbe_get_rx_timestamp(struct sxgbe_rx_ctxt_desc *p)
+{
+	u64 ns;
+
+	ns = p->tstamp_lo;
+	ns |= ((u64)p->tstamp_hi) << 32;
+
+	return ns;
+}
+
+static const struct sxgbe_desc_ops desc_ops = {
+	.init_tx_desc = sxgbe_init_tx_desc,
+	.tx_desc_enable_tse = sxgbe_tx_desc_enable_tse,
+	.prepare_tx_desc = sxgbe_prepare_tx_desc,
+	.tx_vlanctl_desc = sxgbe_tx_vlanctl_desc,
+	.set_tx_owner = sxgbe_set_tx_owner,
+	.get_tx_owner = sxgbe_get_tx_owner,
+	.close_tx_desc = sxgbe_close_tx_desc,
+	.release_tx_desc = sxgbe_release_tx_desc,
+	.clear_tx_ic = sxgbe_clear_tx_ic,
+	.get_tx_ls = sxgbe_get_tx_ls,
+	.get_tx_len = sxgbe_get_tx_len,
+	.tx_enable_tstamp = sxgbe_tx_enable_tstamp,
+	.get_tx_timestamp_status = sxgbe_get_tx_timestamp_status,
+	.tx_ctxt_desc_set_ctxt = sxgbe_tx_ctxt_desc_set_ctxt,
+	.tx_ctxt_desc_set_owner =  sxgbe_tx_ctxt_desc_set_owner,
+	.get_tx_ctxt_owner = sxgbe_tx_ctxt_desc_get_owner,
+	.tx_ctxt_desc_set_mss = sxgbe_tx_ctxt_desc_set_mss,
+	.tx_ctxt_desc_get_mss = sxgbe_tx_ctxt_desc_get_mss,
+	.tx_ctxt_desc_set_tcmssv = sxgbe_tx_ctxt_desc_set_tcmssv,
+	.tx_ctxt_desc_reset_ostc = sxgbe_tx_ctxt_desc_reset_ostc,
+	.tx_ctxt_desc_set_ivlantag = sxgbe_tx_ctxt_desc_set_ivlantag,
+	.tx_ctxt_desc_get_ivlantag = sxgbe_tx_ctxt_desc_get_ivlantag,
+	.tx_ctxt_desc_set_vlantag = sxgbe_tx_ctxt_desc_set_vlantag,
+	.tx_ctxt_desc_get_vlantag = sxgbe_tx_ctxt_desc_get_vlantag,
+	.tx_ctxt_set_tstamp = sxgbe_tx_ctxt_desc_set_tstamp,
+	.close_tx_ctxt_desc = sxgbe_tx_ctxt_desc_close,
+	.get_tx_ctxt_cde = sxgbe_tx_ctxt_desc_get_cde,
+	.init_rx_desc = sxgbe_init_rx_desc,
+	.get_rx_owner = sxgbe_get_rx_owner,
+	.set_rx_owner = sxgbe_set_rx_owner,
+	.get_rx_frame_len = sxgbe_get_rx_frame_len,
+	.get_rx_fd_status = sxgbe_get_rx_fd_status,
+	.get_rx_ld_status = sxgbe_get_rx_ld_status,
+	.rx_wbstatus = sxgbe_rx_wbstatus,
+	.get_rx_ctxt_owner = sxgbe_get_rx_ctxt_owner,
+	.set_rx_ctxt_owner = sxgbe_set_ctxt_rx_owner,
+	.rx_ctxt_wbstatus = sxgbe_rx_ctxt_wbstatus,
+	.get_rx_ctxt_tstamp_status = sxgbe_get_rx_ctxt_tstamp_status,
+	.get_timestamp = sxgbe_get_rx_timestamp,
+};
+
+const struct sxgbe_desc_ops *sxgbe_get_desc_ops(void)
+{
+	return &desc_ops;
+}
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h b/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h
new file mode 100644
index 0000000..41844d4
--- /dev/null
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h
@@ -0,0 +1,291 @@ 
+/* 10G controller driver for Samsung SoCs
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Siva Reddy Kallam <siva.kallam@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __SXGBE_DESC_H__
+#define __SXGBE_DESC_H__
+
+#define SXGBE_DESC_SIZE_BYTES	16
+
+/* forward declaration */
+struct sxgbe_extra_stats;
+
+/* Transmit checksum insertion control */
+enum tdes_csum_insertion {
+	cic_disabled = 0,	/* Checksum Insertion Control */
+	cic_only_ip = 1,	/* Only IP header */
+	/* IP header but pseudoheader is not calculated */
+	cic_no_pseudoheader = 2,
+	cic_full = 3,		/* IP header and pseudoheader */
+};
+
+struct sxgbe_tx_norm_desc {
+	u64 tdes01; /* buf1 address */
+	union {
+		/* TX Read-Format Desc 2,3 */
+		struct {
+			/* TDES2 */
+			u32 buf1_size:14;
+			u32 vlan_tag_ctl:2;
+			u32 buf2_size:14;
+			u32 timestmp_enable:1;
+			u32 int_on_com:1;
+			/* TDES3 */
+			union {
+				u32 tcp_payload_len:18;
+				struct {
+					u32 total_pkt_len:15;
+					u32 reserved1:1;
+					u32 cksum_ctl:2;
+				} cksum_pktlen;
+			} tx_pkt_len;
+
+			u32 tse_bit:1;
+			u32 tcp_hdr_len:4;
+			u32 sa_insert_ctl:3;
+			u32 crc_pad_ctl:2;
+			u32 last_desc:1;
+			u32 first_desc:1;
+			u32 ctxt_bit:1;
+			u32 own_bit:1;
+		} tx_rd_des23;
+
+		/* tx write back Desc 2,3 */
+		struct {
+			/* WB TES2 */
+			u32 reserved1;
+			/* WB TES3 */
+			u32 reserved2:31;
+			u32 own_bit:1;
+		} tx_wb_des23;
+	} tdes23;
+};
+
+struct sxgbe_rx_norm_desc {
+	union {
+		u32 rdes0; /* buf1 address */
+		struct {
+			u32 out_vlan_tag:16;
+			u32 in_vlan_tag:16;
+		} wb_rx_des0;
+	} rd_wb_des0;
+
+	union {
+		u32 rdes1;	/* buf2 address or buf1[63:32] */
+		u32 rss_hash;	/* Write-back RX */
+	} rd_wb_des1;
+
+	union {
+		/* RX Read format Desc 2,3 */
+		struct{
+			/* RDES2 */
+			u32 buf2_addr;
+			/* RDES3 */
+			u32 buf2_hi_addr:30;
+			u32 int_on_com:1;
+			u32 own_bit:1;
+		} rx_rd_des23;
+
+		/* RX write back */
+		struct{
+			/* WB RDES2 */
+			u32 hdr_len:10;
+			u32 rdes2_reserved:2;
+			u32 elrd_val:1;
+			u32 iovt_sel:1;
+			u32 res_pkt:1;
+			u32 vlan_filter_match:1;
+			u32 sa_filter_fail:1;
+			u32 da_filter_fail:1;
+			u32 hash_filter_pass:1;
+			u32 macaddr_filter_match:8;
+			u32 l3_filter_match:1;
+			u32 l4_filter_match:1;
+			u32 l34_filter_num:3;
+
+			/* WB RDES3 */
+			u32 pkt_len:14;
+			u32 rdes3_reserved:1;
+			u32 err_summary:15;
+			u32 err_l2_type:4;
+			u32 layer34_pkt_type:4;
+			u32 no_coagulation_pkt:1;
+			u32 in_seq_pkt:1;
+			u32 rss_valid:1;
+			u32 context_des_avail:1;
+			u32 last_desc:1;
+			u32 first_desc:1;
+			u32 recv_context_desc:1;
+			u32 own_bit:1;
+		} rx_wb_des23;
+	} rdes23;
+};
+
+/* Context descriptor structure */
+struct sxgbe_tx_ctxt_desc {
+	u32 tstamp_lo;
+	u32 tstamp_hi;
+	u32 maxseg_size:15;
+	u32 reserved1:1;
+	u32 ivlan_tag:16;
+	u32 vlan_tag:16;
+	u32 vltag_valid:1;
+	u32 ivlan_tag_valid:1;
+	u32 ivlan_tag_ctl:2;
+	u32 reserved2:3;
+	u32 ctxt_desc_err:1;
+	u32 reserved3:2;
+	u32 ostc:1;
+	u32 tcmssv:1;
+	u32 reserved4:2;
+	u32 ctxt_bit:1;
+	u32 own_bit:1;
+};
+
+struct sxgbe_rx_ctxt_desc {
+	u32 tstamp_lo;
+	u32 tstamp_hi;
+	u32 reserved1;
+	u32 ptp_msgtype:4;
+	u32 tstamp_available:1;
+	u32 ptp_rsp_err:1;
+	u32 tstamp_dropped:1;
+	u32 reserved2:23;
+	u32 rx_ctxt_desc:1;
+	u32 own_bit:1;
+};
+
+struct sxgbe_desc_ops {
+	/* DMA TX descriptor ring initialization */
+	void (*init_tx_desc)(struct sxgbe_tx_norm_desc *p);
+
+	/* Invoked by the xmit function to prepare the tx descriptor */
+	void (*tx_enable_tse)(struct sxgbe_tx_norm_desc *p, u8 is_tse,
+				u32 hdr_len, u32 payload_len);
+
+	/* Assign buffer lengths for descriptor */
+	void (*prepare_tx_desc)(struct sxgbe_tx_norm_desc *p, u8 is_fd,
+				int buf1_len, int pkt_len, int cksum);
+
+	/* Set VLAN control information */
+	void (*tx_vlanctl_desc)(struct sxgbe_tx_norm_desc *p, int vlan_ctl);
+
+	/* Set the owner of the descriptor */
+	void (*set_tx_owner)(struct sxgbe_tx_norm_desc *p);
+
+	/* Get the owner of the descriptor */
+	int (*get_tx_owner)(struct sxgbe_tx_norm_desc *p);
+
+	/* Invoked by the xmit function to close the tx descriptor */
+	void (*close_tx_desc)(struct sxgbe_tx_norm_desc *p);
+
+	/* Clean the tx descriptor as soon as the tx irq is received */
+	void (*release_tx_desc)(struct sxgbe_tx_norm_desc *p);
+
+	/* Clear interrupt on tx frame completion. When this bit is
+	 * set an interrupt happens as soon as the frame is transmitted
+	 */
+	void (*clear_tx_ic)(struct sxgbe_tx_norm_desc *p);
+
+	/* Last tx segment reports the transmit status */
+	int (*get_tx_ls)(struct sxgbe_tx_norm_desc *p);
+
+	/* Get the buffer size from the descriptor */
+	int (*get_tx_len)(struct sxgbe_tx_norm_desc *p);
+
+	/* Set tx timestamp enable bit */
+	void (*tx_enable_tstamp)(struct sxgbe_tx_norm_desc *p);
+
+	/* get tx timestamp status */
+	int (*get_tx_timestamp_status)(struct sxgbe_tx_norm_desc *p);
+
+	/* TX Context Descripto Specific */
+	void (*init_tx_ctxt_desc)(struct sxgbe_tx_ctxt_desc *p);
+
+	/* Set the owner of the TX context descriptor */
+	void (*set_tx_ctxt_owner)(struct sxgbe_tx_ctxt_desc *p);
+
+	/* Get the owner of the TX context descriptor */
+	int (*get_tx_ctxt_owner)(struct sxgbe_tx_ctxt_desc *p);
+
+	/* Set TX mss */
+	void (*tx_ctxt_desc_setmss)(struct sxgbe_tx_ctxt_desc *p, int mss);
+
+	/* Set TX mss */
+	int (*tx_ctxt_desc_get_mss)(struct sxgbe_tx_ctxt_desc *p);
+
+	/* Set IVLAN information */
+	void (*tx_ctxt_desc_set_ivlantag)(struct sxgbe_tx_ctxt_desc *p,
+					  int is_ivlanvalid, int ivlan_tag,
+					  int ivlan_ctl);
+
+	/* Return IVLAN Tag */
+	int (*tx_ctxt_desc_get_ivlantag)(struct sxgbe_tx_ctxt_desc *p);
+
+	/* Set VLAN Tag */
+	void (*tx_ctxt_desc_set_vlantag)(struct sxgbe_tx_ctxt_desc *p,
+					 int is_vlanvalid, int vlan_tag);
+
+	/* Return VLAN Tag */
+	int (*tx_ctxt_desc_get_vlantag)(struct sxgbe_tx_ctxt_desc *p);
+
+	/* Set Time stamp */
+	void (*tx_ctxt_set_tstamp)(struct sxgbe_tx_ctxt_desc *p,
+				   u8 ostc_enable, u64 tstamp);
+
+	/* Close TX context descriptor */
+	void (*close_tx_ctxt_desc)(struct sxgbe_tx_ctxt_desc *p);
+
+	/* WB status of context descriptor */
+	int (*get_tx_ctxt_cde)(struct sxgbe_tx_ctxt_desc *p);
+
+	/* DMA RX descriptor ring initialization */
+	void (*init_rx_desc)(struct sxgbe_rx_norm_desc *p, int disable_rx_ic,
+			     int mode, int end);
+
+	/* Get own bit */
+	int (*get_rx_owner)(struct sxgbe_rx_norm_desc *p);
+
+	/* Set own bit */
+	void (*set_rx_owner)(struct sxgbe_rx_norm_desc *p);
+
+	/* Get the receive frame size */
+	int (*get_rx_frame_len)(struct sxgbe_rx_norm_desc *p);
+
+	/* Return first Descriptor status */
+	int (*get_rx_fd_status)(struct sxgbe_rx_norm_desc *p);
+
+	/* Return first Descriptor status */
+	int (*get_rx_ld_status)(struct sxgbe_rx_norm_desc *p);
+
+	/* Return the reception status looking at the RDES1 */
+	void (*rx_wbstatus)(struct sxgbe_rx_norm_desc *p,
+				struct sxgbe_extra_stats *x);
+
+	/* Get own bit */
+	int (*get_rx_ctxt_owner)(struct sxgbe_rx_ctxt_desc *p);
+
+	/* Set own bit */
+	void (*set_rx_ctxt_owner)(struct sxgbe_rx_ctxt_desc *p);
+
+	/* Return the reception status looking at Context control information */
+	void (*rx_ctxt_wbstatus)(struct sxgbe_rx_ctxt_desc *p,
+				 struct sxgbe_extra_stats *x);
+
+	/* Get rx timestamp status */
+	int (*get_rx_ctxt_tstamp_status)(struct sxgbe_rx_ctxt_desc *p);
+
+	/* Get timestamp value for rx, need to check this */
+	u64 (*get_timestamp)(struct sxgbe_rx_ctxt_desc *p);
+};
+
+const struct sxgbe_desc_ops *sxgbe_get_desc_ops(void);
+
+#endif /* __SXGBE_DESC_H__ */
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.c
new file mode 100644
index 0000000..1e68ef3
--- /dev/null
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.c
@@ -0,0 +1,377 @@ 
+/* 10G controller driver for Samsung SoCs
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Siva Reddy Kallam <siva.kallam@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/io.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+
+#include "sxgbe_common.h"
+#include "sxgbe_dma.h"
+#include "sxgbe_reg.h"
+#include "sxgbe_desc.h"
+
+/* DMA core initialization */
+static int sxgbe_dma_init(void __iomem *ioaddr, int fix_burst,
+			  int burst_map, int adv_addr_mode)
+{
+	int retry_count = 10;
+	u32 reg_val;
+
+	/* reset the DMA */
+	writel(SXGBE_DMA_SOFT_RESET, ioaddr + SXGBE_DMA_MODE_REG);
+	while (retry_count--) {
+		if (!(readl(ioaddr + SXGBE_DMA_MODE_REG) &
+		      SXGBE_DMA_SOFT_RESET))
+			break;
+		mdelay(10);
+	}
+
+	if (retry_count < 0)
+		return -EBUSY;
+
+	reg_val = readl(ioaddr + SXGBE_DMA_SYSBUS_MODE_REG);
+
+	/* if fix_burst = 0, Set UNDEF = 1 of DMA_Sys_Mode Register.
+	 * if fix_burst = 1, Set UNDEF = 0 of DMA_Sys_Mode Register.
+	 * burst_map is bitmap for  BLEN[4, 8, 16, 32, 64, 128 and 256].
+	 * Set burst_map irrespective of fix_burst value.
+	 */
+	if (!fix_burst)
+		reg_val |= SXGBE_DMA_AXI_UNDEF_BURST;
+
+	/* enable adavnced address mode */
+	if (adv_addr_mode)
+		reg_val |= SXGBE_DMA_ENHACE_ADDR_MODE;
+
+	/* write burst len map */
+	reg_val |= (burst_map << SXGBE_DMA_BLENMAP_LSHIFT);
+
+	writel(reg_val,	ioaddr + SXGBE_DMA_SYSBUS_MODE_REG);
+
+	return 0;
+}
+
+static void sxgbe_dma_channel_init(void __iomem *ioaddr, int cha_num,
+				   int fix_burst, int pbl, dma_addr_t dma_tx,
+				   dma_addr_t dma_rx, int t_rsize, int r_rsize)
+{
+	u32 reg_val;
+	dma_addr_t dma_addr;
+
+	reg_val = readl(ioaddr + SXGBE_DMA_CHA_CTL_REG(cha_num));
+	/* set the pbl */
+	if (fix_burst) {
+		reg_val |= SXGBE_DMA_PBL_X8MODE;
+		writel(reg_val, ioaddr + SXGBE_DMA_CHA_CTL_REG(cha_num));
+		/* program the TX pbl */
+		reg_val = readl(ioaddr + SXGBE_DMA_CHA_TXCTL_REG(cha_num));
+		reg_val |= (pbl << SXGBE_DMA_TXPBL_LSHIFT);
+		writel(reg_val, ioaddr + SXGBE_DMA_CHA_TXCTL_REG(cha_num));
+		/* program the RX pbl */
+		reg_val = readl(ioaddr + SXGBE_DMA_CHA_RXCTL_REG(cha_num));
+		reg_val |= (pbl << SXGBE_DMA_RXPBL_LSHIFT);
+		writel(reg_val, ioaddr + SXGBE_DMA_CHA_RXCTL_REG(cha_num));
+	}
+
+	/* program desc registers */
+	writel(dma_tx >> 32,
+	       ioaddr + SXGBE_DMA_CHA_TXDESC_HADD_REG(cha_num));
+	writel(dma_tx & 0xFFFFFFFF,
+	       ioaddr + SXGBE_DMA_CHA_TXDESC_LADD_REG(cha_num));
+
+	writel(dma_rx >> 32,
+	       ioaddr + SXGBE_DMA_CHA_RXDESC_HADD_REG(cha_num));
+	writel(dma_rx & 0xFFFFFFFF,
+	       ioaddr + SXGBE_DMA_CHA_RXDESC_LADD_REG(cha_num));
+
+	/* program tail pointers */
+	/* assumption: upper 32 bits are constant and
+	 * same as TX/RX desc list
+	 */
+	dma_addr = dma_tx + ((t_rsize - 1) * SXGBE_DESC_SIZE_BYTES);
+	writel(dma_addr & 0xFFFFFFFF,
+	       ioaddr + SXGBE_DMA_CHA_TXDESC_TAILPTR_REG(cha_num));
+
+	dma_addr = dma_rx + ((r_rsize - 1) * SXGBE_DESC_SIZE_BYTES);
+	writel(dma_addr & 0xFFFFFFFF,
+	       ioaddr + SXGBE_DMA_CHA_RXDESC_LADD_REG(cha_num));
+	/* program the ring sizes */
+	writel(t_rsize - 1, ioaddr + SXGBE_DMA_CHA_TXDESC_RINGLEN_REG(cha_num));
+	writel(r_rsize - 1, ioaddr + SXGBE_DMA_CHA_RXDESC_RINGLEN_REG(cha_num));
+
+	/* Enable TX/RX interrupts */
+	writel(SXGBE_DMA_ENA_INT,
+	       ioaddr + SXGBE_DMA_CHA_INT_ENABLE_REG(cha_num));
+}
+
+static void sxgbe_enable_dma_transmission(void __iomem *ioaddr, int cha_num)
+{
+	u32 tx_config;
+
+	tx_config = readl(ioaddr + SXGBE_DMA_CHA_TXCTL_REG(cha_num));
+	tx_config |= SXGBE_TX_START_DMA;
+	writel(tx_config, ioaddr + SXGBE_DMA_CHA_TXCTL_REG(cha_num));
+}
+
+static void sxgbe_enable_dma_irq(void __iomem *ioaddr, int dma_cnum)
+{
+	/* Enable TX/RX interrupts */
+	writel(SXGBE_DMA_ENA_INT,
+	       ioaddr + SXGBE_DMA_CHA_INT_ENABLE_REG(dma_cnum));
+}
+
+static void sxgbe_disable_dma_irq(void __iomem *ioaddr, int dma_cnum)
+{
+	/* Disable TX/RX interrupts */
+	writel(0, ioaddr + SXGBE_DMA_CHA_INT_ENABLE_REG(dma_cnum));
+}
+
+static void sxgbe_dma_start_tx(void __iomem *ioaddr, int tchannels)
+{
+	int cnum;
+	u32 tx_ctl_reg;
+
+	for (cnum = 0; cnum < tchannels; cnum++) {
+		tx_ctl_reg = readl(ioaddr + SXGBE_DMA_CHA_TXCTL_REG(cnum));
+		tx_ctl_reg |= SXGBE_TX_ENABLE;
+		writel(tx_ctl_reg,
+		       ioaddr + SXGBE_DMA_CHA_TXCTL_REG(cnum));
+	}
+}
+
+static void sxgbe_dma_start_tx_queue(void __iomem *ioaddr, int dma_cnum)
+{
+	u32 tx_ctl_reg;
+
+	tx_ctl_reg = readl(ioaddr + SXGBE_DMA_CHA_TXCTL_REG(dma_cnum));
+	tx_ctl_reg |= SXGBE_TX_ENABLE;
+	writel(tx_ctl_reg, ioaddr + SXGBE_DMA_CHA_TXCTL_REG(dma_cnum));
+}
+
+static void sxgbe_dma_stop_tx_queue(void __iomem *ioaddr, int dma_cnum)
+{
+	u32 tx_ctl_reg;
+
+	tx_ctl_reg = readl(ioaddr + SXGBE_DMA_CHA_TXCTL_REG(dma_cnum));
+	tx_ctl_reg &= ~(SXGBE_TX_ENABLE);
+	writel(tx_ctl_reg, ioaddr + SXGBE_DMA_CHA_TXCTL_REG(dma_cnum));
+}
+
+static void sxgbe_dma_stop_tx(void __iomem *ioaddr, int tchannels)
+{
+	int cnum;
+	u32 tx_ctl_reg;
+
+	for (cnum = 0; cnum < tchannels; cnum++) {
+		tx_ctl_reg = readl(ioaddr + SXGBE_DMA_CHA_TXCTL_REG(cnum));
+		tx_ctl_reg &= ~(SXGBE_TX_ENABLE);
+		writel(tx_ctl_reg, ioaddr + SXGBE_DMA_CHA_TXCTL_REG(cnum));
+	}
+}
+
+static void sxgbe_dma_start_rx(void __iomem *ioaddr, int rchannels)
+{
+	int cnum;
+	u32 rx_ctl_reg;
+
+	for (cnum = 0; cnum < rchannels; cnum++) {
+		rx_ctl_reg = readl(ioaddr + SXGBE_DMA_CHA_RXCTL_REG(cnum));
+		rx_ctl_reg |= SXGBE_RX_ENABLE;
+		writel(rx_ctl_reg,
+		       ioaddr + SXGBE_DMA_CHA_RXCTL_REG(cnum));
+	}
+}
+
+static void sxgbe_dma_stop_rx(void __iomem *ioaddr, int rchannels)
+{
+	int cnum;
+	u32 rx_ctl_reg;
+
+	for (cnum = 0; cnum < rchannels; cnum++) {
+		rx_ctl_reg = readl(ioaddr + SXGBE_DMA_CHA_RXCTL_REG(cnum));
+		rx_ctl_reg &= ~(SXGBE_RX_ENABLE);
+		writel(rx_ctl_reg, ioaddr + SXGBE_DMA_CHA_RXCTL_REG(cnum));
+	}
+}
+
+static int sxgbe_tx_dma_int_status(void __iomem *ioaddr, int channel_no,
+				   struct sxgbe_extra_stats *x)
+{
+	u32 int_status = readl(ioaddr + SXGBE_DMA_CHA_STATUS_REG(channel_no));
+	u32 clear_val = 0;
+	u32 ret_val = 0;
+
+	/* TX Normal Interrupt Summary */
+	if (likely(int_status & SXGBE_DMA_INT_STATUS_NIS)) {
+		x->normal_irq_n++;
+		if (int_status & SXGBE_DMA_INT_STATUS_TI) {
+			ret_val |= handle_tx;
+			x->tx_normal_irq_n++;
+			clear_val |= SXGBE_DMA_INT_STATUS_TI;
+		}
+
+		if (int_status & SXGBE_DMA_INT_STATUS_TBU) {
+			x->tx_underflow_irq++;
+			ret_val |= tx_bump_tc;
+			clear_val |= SXGBE_DMA_INT_STATUS_TBU;
+		}
+	} else if (unlikely(int_status & SXGBE_DMA_INT_STATUS_AIS)) {
+		/* TX Abnormal Interrupt Summary */
+		if (int_status & SXGBE_DMA_INT_STATUS_TPS) {
+			ret_val |= tx_hard_error;
+			clear_val |= SXGBE_DMA_INT_STATUS_TPS;
+			x->tx_process_stopped_irq++;
+		}
+
+		if (int_status & SXGBE_DMA_INT_STATUS_FBE) {
+			ret_val |= tx_hard_error;
+			x->fatal_bus_error_irq++;
+
+			/* Assumption: FBE bit is the combination of
+			 * all the bus access erros and cleared when
+			 * the respective error bits cleared
+			 */
+
+			/* check for actual cause */
+			if (int_status & SXGBE_DMA_INT_STATUS_TEB0) {
+				x->tx_read_transfer_err++;
+				clear_val |= SXGBE_DMA_INT_STATUS_TEB0;
+			} else {
+				x->tx_write_transfer_err++;
+			}
+
+			if (int_status & SXGBE_DMA_INT_STATUS_TEB1) {
+				x->tx_desc_access_err++;
+				clear_val |= SXGBE_DMA_INT_STATUS_TEB1;
+			} else {
+				x->tx_buffer_access_err++;
+			}
+
+			if (int_status & SXGBE_DMA_INT_STATUS_TEB2) {
+				x->tx_data_transfer_err++;
+				clear_val |= SXGBE_DMA_INT_STATUS_TEB2;
+			}
+		}
+
+		/* context descriptor error */
+		if (int_status & SXGBE_DMA_INT_STATUS_CTXTERR) {
+			x->tx_ctxt_desc_err++;
+			clear_val |= SXGBE_DMA_INT_STATUS_CTXTERR;
+		}
+	}
+
+	/* clear the served bits */
+	writel(clear_val, ioaddr + SXGBE_DMA_CHA_STATUS_REG(channel_no));
+
+	return ret_val;
+}
+
+static int sxgbe_rx_dma_int_status(void __iomem *ioaddr, int channel_no,
+				   struct sxgbe_extra_stats *x)
+{
+	u32 int_status = readl(ioaddr + SXGBE_DMA_CHA_STATUS_REG(channel_no));
+	u32 clear_val = 0;
+	u32 ret_val = 0;
+
+	/* RX Normal Interrupt Summary */
+	if (likely(int_status & SXGBE_DMA_INT_STATUS_NIS)) {
+		x->normal_irq_n++;
+		if (int_status & SXGBE_DMA_INT_STATUS_RI) {
+			ret_val |= handle_rx;
+			x->rx_normal_irq_n++;
+			clear_val |= SXGBE_DMA_INT_STATUS_RI;
+		}
+	} else if (unlikely(int_status & SXGBE_DMA_INT_STATUS_AIS)) {
+		/* RX Abnormal Interrupt Summary */
+		if (int_status & SXGBE_DMA_INT_STATUS_RBU) {
+			ret_val |= rx_bump_tc;
+			clear_val |= SXGBE_DMA_INT_STATUS_RBU;
+			x->rx_underflow_irq++;
+		}
+
+		if (int_status & SXGBE_DMA_INT_STATUS_RPS) {
+			ret_val |= rx_hard_error;
+			clear_val |= SXGBE_DMA_INT_STATUS_RPS;
+			x->rx_process_stopped_irq++;
+		}
+
+		if (int_status & SXGBE_DMA_INT_STATUS_FBE) {
+			ret_val |= rx_hard_error;
+			x->fatal_bus_error_irq++;
+
+			/* Assumption: FBE bit is the combination of
+			 * all the bus access erros and cleared when
+			 * the respective error bits cleared
+			 */
+
+			/* check for actual cause */
+			if (int_status & SXGBE_DMA_INT_STATUS_REB0) {
+				x->rx_read_transfer_err++;
+				clear_val |= SXGBE_DMA_INT_STATUS_REB0;
+			} else {
+				x->rx_write_transfer_err++;
+			}
+
+			if (int_status & SXGBE_DMA_INT_STATUS_REB1) {
+				x->rx_desc_access_err++;
+				clear_val |= SXGBE_DMA_INT_STATUS_REB1;
+			} else {
+				x->rx_buffer_access_err++;
+			}
+
+			if (int_status & SXGBE_DMA_INT_STATUS_REB2) {
+				x->rx_data_transfer_err++;
+				clear_val |= SXGBE_DMA_INT_STATUS_REB2;
+			}
+		}
+	}
+
+	/* clear the served bits */
+	writel(clear_val, ioaddr + SXGBE_DMA_CHA_STATUS_REG(channel_no));
+
+	return ret_val;
+}
+
+/* Program the HW RX Watchdog */
+static void sxgbe_dma_rx_watchdog(void __iomem *ioaddr, u32 riwt)
+{
+	u32 que_num;
+
+	SXGBE_FOR_EACH_QUEUE(SXGBE_RX_QUEUES, que_num) {
+		writel(riwt,
+		       ioaddr + SXGBE_DMA_CHA_INT_RXWATCHTMR_REG(que_num));
+	}
+}
+
+static const struct sxgbe_dma_ops sxgbe_dma_ops = {
+	.init = sxgbe_dma_init,
+	.cha_init = sxgbe_dma_channel_init,
+	.enable_dma_transmission = sxgbe_enable_dma_transmission,
+	.enable_dma_irq = sxgbe_enable_dma_irq,
+	.disable_dma_irq = sxgbe_disable_dma_irq,
+	.start_tx = sxgbe_dma_start_tx,
+	.start_tx_queue = sxgbe_dma_start_tx_queue,
+	.stop_tx = sxgbe_dma_stop_tx,
+	.stop_tx_queue = sxgbe_dma_stop_tx_queue,
+	.start_rx = sxgbe_dma_start_rx,
+	.stop_rx = sxgbe_dma_stop_rx,
+	.tx_dma_int_status = sxgbe_tx_dma_int_status,
+	.rx_dma_int_status = sxgbe_rx_dma_int_status,
+	.rx_watchdog = sxgbe_dma_rx_watchdog,
+};
+
+const struct sxgbe_dma_ops *sxgbe_get_dma_ops(void)
+{
+	return &sxgbe_dma_ops;
+}
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.h b/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.h
new file mode 100644
index 0000000..50c8054
--- /dev/null
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.h
@@ -0,0 +1,49 @@ 
+/* 10G controller driver for Samsung SoCs
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Siva Reddy Kallam <siva.kallam@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __SXGBE_DMA_H__
+#define __SXGBE_DMA_H__
+
+/* forward declaration */
+struct sxgbe_extra_stats;
+
+#define SXGBE_DMA_BLENMAP_LSHIFT	1
+#define SXGBE_DMA_TXPBL_LSHIFT		16
+#define SXGBE_DMA_RXPBL_LSHIFT		16
+#define DEFAULT_DMA_PBL			8
+
+struct sxgbe_dma_ops {
+	/* DMA core initialization */
+	int (*init)(void __iomem *ioaddr, int fix_burst,
+		    int burst_map, int enhance_amode);
+	void (*cha_init)(void __iomem *ioaddr, int cha_num, int fix_burst,
+			 int pbl, dma_addr_t dma_tx, dma_addr_t dma_rx,
+			 int t_rzie, int r_rsize);
+	void (*enable_dma_transmission)(void __iomem *ioaddr, int dma_cnum);
+	void (*enable_dma_irq)(void __iomem *ioaddr, int dma_cnum);
+	void (*disable_dma_irq)(void __iomem *ioaddr, int dma_cnum);
+	void (*start_tx)(void __iomem *ioaddr, int tchannels);
+	void (*start_tx_queue)(void __iomem *ioaddr, int dma_cnum);
+	void (*stop_tx)(void __iomem *ioaddr, int tchannels);
+	void (*stop_tx_queue)(void __iomem *ioaddr, int dma_cnum);
+	void (*start_rx)(void __iomem *ioaddr, int rchannels);
+	void (*stop_rx)(void __iomem *ioaddr, int rchannels);
+	int (*tx_dma_int_status)(void __iomem *ioaddr, int channel_no,
+				 struct sxgbe_extra_stats *x);
+	int (*rx_dma_int_status)(void __iomem *ioaddr, int channel_no,
+				 struct sxgbe_extra_stats *x);
+	/* Program the HW RX Watchdog */
+	void (*rx_watchdog)(void __iomem *ioaddr, u32 riwt);
+};
+
+const struct sxgbe_dma_ops *sxgbe_get_dma_ops(void);
+
+#endif /* __SXGBE_CORE_H__ */
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c
new file mode 100644
index 0000000..1dce2b2
--- /dev/null
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c
@@ -0,0 +1,44 @@ 
+/* 10G controller driver for Samsung SoCs
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Siva Reddy Kallam <siva.kallam@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+
+#include "sxgbe_common.h"
+
+struct sxgbe_stats {
+	char stat_string[ETH_GSTRING_LEN];
+	int sizeof_stat;
+	int stat_offset;
+};
+
+#define SXGBE_STAT(m)						\
+{								\
+	#m,							\
+	FIELD_SIZEOF(struct sxgbe_extra_stats, m),		\
+	offsetof(struct sxgbe_priv_data, xstats.m)		\
+}
+
+static const struct sxgbe_stats sxgbe_gstrings_stats[] = {
+};
+#define SXGBE_STATS_LEN ARRAY_SIZE(sxgbe_gstrings_stats)
+
+static const struct ethtool_ops sxgbe_ethtool_ops = {
+};
+
+void sxgbe_set_ethtool_ops(struct net_device *netdev)
+{
+	SET_ETHTOOL_OPS(netdev, &sxgbe_ethtool_ops);
+}
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
new file mode 100644
index 0000000..8e4e78f
--- /dev/null
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
@@ -0,0 +1,2063 @@ 
+/* 10G controller driver for Samsung SoCs
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Siva Reddy Kallam <siva.kallam@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/clk.h>
+#include <linux/crc32.h>
+#include <linux/dma-mapping.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/if.h>
+#include <linux/if_ether.h>
+#include <linux/if_vlan.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ip.h>
+#include <linux/kernel.h>
+#include <linux/mii.h>
+#include <linux/module.h>
+#include <linux/net_tstamp.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/prefetch.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include <linux/tcp.h>
+#include <linux/sxgbe_platform.h>
+
+#include "sxgbe_common.h"
+#include "sxgbe_desc.h"
+#include "sxgbe_dma.h"
+#include "sxgbe_mtl.h"
+#include "sxgbe_reg.h"
+
+#define SXGBE_ALIGN(x)	L1_CACHE_ALIGN(x)
+#define JUMBO_LEN	9000
+
+/* Module parameters */
+#define TX_TIMEO	5000
+#define DMA_TX_SIZE	512
+#define DMA_RX_SIZE	1024
+#define TC_DEFAULT	64
+#define DMA_BUFFER_SIZE	BUF_SIZE_2KiB
+/* The default timer value as per the sxgbe specification 1 sec(1000 ms) */
+#define SXGBE_DEFAULT_LPI_TIMER	1000
+
+static int debug = -1;
+
+module_param(debug, int, S_IRUGO | S_IWUSR);
+static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE |
+				      NETIF_MSG_LINK | NETIF_MSG_IFUP |
+				      NETIF_MSG_IFDOWN | NETIF_MSG_TIMER);
+
+static irqreturn_t sxgbe_common_interrupt(int irq, void *dev_id);
+static irqreturn_t sxgbe_tx_interrupt(int irq, void *dev_id);
+static irqreturn_t sxgbe_rx_interrupt(int irq, void *dev_id);
+
+#define SXGBE_COAL_TIMER(x) (jiffies + usecs_to_jiffies(x))
+
+/**
+ * sxgbe_clk_csr_set - dynamically set the MDC clock
+ * @priv: driver private structure
+ * Description: this is to dynamically set the MDC clock according to the csr
+ * clock input.
+ */
+static void sxgbe_clk_csr_set(struct sxgbe_priv_data *priv)
+{
+	u32 clk_rate = clk_get_rate(priv->sxgbe_clk);
+
+	/* assign the proper divider, this will be used during
+	 * mdio communication
+	 */
+	if (clk_rate < SXGBE_CSR_F_150M)
+		priv->clk_csr = SXGBE_CSR_100_150M;
+	else if (clk_rate <= SXGBE_CSR_F_250M)
+		priv->clk_csr = SXGBE_CSR_150_250M;
+	else if (clk_rate <= SXGBE_CSR_F_300M)
+		priv->clk_csr = SXGBE_CSR_250_300M;
+	else if (clk_rate <= SXGBE_CSR_F_350M)
+		priv->clk_csr = SXGBE_CSR_300_350M;
+	else if (clk_rate <= SXGBE_CSR_F_400M)
+		priv->clk_csr = SXGBE_CSR_350_400M;
+	else if (clk_rate <= SXGBE_CSR_F_500M)
+		priv->clk_csr = SXGBE_CSR_400_500M;
+}
+
+/* minimum number of free TX descriptors required to wake up TX process */
+#define SXGBE_TX_THRESH(x)	(x->dma_tx_size/4)
+
+static inline u32 sxgbe_tx_avail(struct sxgbe_tx_queue *queue, int tx_qsize)
+{
+	return queue->dirty_tx + tx_qsize - queue->cur_tx - 1;
+}
+
+/**
+ * sxgbe_adjust_link
+ * @dev: net device structure
+ * Description: it adjusts the link parameters.
+ */
+static void sxgbe_adjust_link(struct net_device *dev)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+	struct phy_device *phydev = priv->phydev;
+	u8 new_state = 0;
+	u8 speed = 0xff;
+
+	if (!phydev)
+		return;
+
+	/* SXGBE is not supporting auto-negotiation and
+	 * half duplex mode. so, not handling duplex change
+	 * in this function. only handling speed and link status
+	 */
+	if (phydev->link) {
+		if (phydev->speed != priv->speed) {
+			new_state = 1;
+			switch (phydev->speed) {
+			case SPEED_10000:
+				speed = SXGBE_SPEED_10G;
+				break;
+			case SPEED_2500:
+				speed = SXGBE_SPEED_2_5G;
+				break;
+			case SPEED_1000:
+				speed = SXGBE_SPEED_1G;
+				break;
+			default:
+				netif_err(priv, link, dev,
+					  "Speed (%d) not supported\n",
+					  phydev->speed);
+			}
+
+			priv->speed = phydev->speed;
+			priv->hw->mac->set_speed(priv->ioaddr, speed);
+		}
+
+		if (!priv->oldlink) {
+			new_state = 1;
+			priv->oldlink = 1;
+		}
+	} else if (priv->oldlink) {
+		new_state = 1;
+		priv->oldlink = 0;
+		priv->speed = SPEED_UNKNOWN;
+	}
+
+	if (new_state & netif_msg_link(priv))
+		phy_print_status(phydev);
+}
+
+/**
+ * sxgbe_init_phy - PHY initialization
+ * @dev: net device structure
+ * Description: it initializes the driver's PHY state, and attaches the PHY
+ * to the mac driver.
+ *  Return value:
+ *  0 on success
+ */
+static int sxgbe_init_phy(struct net_device *ndev)
+{
+	char phy_id_fmt[MII_BUS_ID_SIZE + 3];
+	char bus_id[MII_BUS_ID_SIZE];
+	struct phy_device *phydev;
+	struct sxgbe_priv_data *priv = netdev_priv(ndev);
+	int phy_iface = priv->plat->interface;
+
+	/* assign default link status */
+	priv->oldlink = 0;
+	priv->speed = SPEED_UNKNOWN;
+	priv->oldduplex = DUPLEX_UNKNOWN;
+
+	if (priv->plat->phy_bus_name)
+		snprintf(bus_id, MII_BUS_ID_SIZE, "%s-%x",
+			 priv->plat->phy_bus_name, priv->plat->bus_id);
+	else
+		snprintf(bus_id, MII_BUS_ID_SIZE, "sxgbe-%x",
+			 priv->plat->bus_id);
+
+	snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
+		 priv->plat->phy_addr);
+	netdev_dbg(ndev, "%s: trying to attach to %s\n", __func__, phy_id_fmt);
+
+	phydev = phy_connect(ndev, phy_id_fmt, &sxgbe_adjust_link, phy_iface);
+
+	if (IS_ERR(phydev)) {
+		netdev_err(ndev, "Could not attach to PHY\n");
+		return PTR_ERR(phydev);
+	}
+
+	/* Stop Advertising 1000BASE Capability if interface is not GMII */
+	if ((phy_iface == PHY_INTERFACE_MODE_MII) ||
+	    (phy_iface == PHY_INTERFACE_MODE_RMII))
+		phydev->advertising &= ~(SUPPORTED_1000baseT_Half |
+					 SUPPORTED_1000baseT_Full);
+	if (phydev->phy_id == 0) {
+		phy_disconnect(phydev);
+		return -ENODEV;
+	}
+
+	netdev_dbg(ndev, "%s: attached to PHY (UID 0x%x) Link = %d\n",
+		   __func__, phydev->phy_id, phydev->link);
+
+	/* save phy device in private structure */
+	priv->phydev = phydev;
+
+	return 0;
+}
+
+/**
+ * sxgbe_clear_descriptors: clear descriptors
+ * @priv: driver private structure
+ * Description: this function is called to clear the tx and rx descriptors
+ * in case of both basic and extended descriptors are used.
+ */
+static void sxgbe_clear_descriptors(struct sxgbe_priv_data *priv)
+{
+	int i, j;
+	unsigned int txsize = priv->dma_tx_size;
+	unsigned int rxsize = priv->dma_rx_size;
+
+	/* Clear the Rx/Tx descriptors */
+	for (j = 0; j < SXGBE_RX_QUEUES; j++) {
+		for (i = 0; i < rxsize; i++)
+			priv->hw->desc->init_rx_desc(&priv->rxq[j]->dma_rx[i],
+						     priv->use_riwt, priv->mode,
+						     (i == rxsize - 1));
+	}
+
+	for (j = 0; j < SXGBE_TX_QUEUES; j++) {
+		for (i = 0; i < txsize; i++)
+			priv->hw->desc->init_tx_desc(&priv->txq[j]->dma_tx[i]);
+	}
+}
+
+static int sxgbe_init_rx_buffers(struct net_device *dev,
+				 struct sxgbe_rx_norm_desc *p, int i,
+				 unsigned int dma_buf_sz,
+				 struct sxgbe_rx_queue *rx_ring)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+	struct sk_buff *skb;
+
+	skb = __netdev_alloc_skb(dev, dma_buf_sz, GFP_KERNEL);
+	if (!skb)
+		return -ENOMEM;
+
+	skb_reserve(skb, NET_IP_ALIGN);
+
+	rx_ring->rx_skbuff[i] = skb;
+	rx_ring->rx_skbuff_dma[i] = dma_map_single(priv->device, skb->data,
+						   dma_buf_sz, DMA_FROM_DEVICE);
+
+	if (dma_mapping_error(priv->device, rx_ring->rx_skbuff_dma[i])) {
+		netdev_err(dev, "%s: DMA mapping error\n", __func__);
+		dev_kfree_skb_any(skb);
+		return -EINVAL;
+	}
+
+	p->rdes23.rx_rd_des23.buf2_addr = rx_ring->rx_skbuff_dma[i];
+
+	return 0;
+}
+/**
+ * init_tx_ring - init the TX descriptor ring
+ * @dev: net device structure
+ * @tx_ring: ring to be intialised
+ * @tx_rsize: ring size
+ * Description:  this function initializes the DMA TX descriptor
+ */
+static int init_tx_ring(struct device *dev, u8 queue_no,
+			struct sxgbe_tx_queue *tx_ring,	int tx_rsize)
+{
+	/* TX ring is not allcoated */
+	if (!tx_ring) {
+		dev_err(dev, "No memory for TX queue of SXGBE\n");
+		return -ENOMEM;
+	}
+
+	/* allocate memory for TX descriptors */
+	tx_ring->dma_tx = dma_zalloc_coherent(dev,
+					      tx_rsize * sizeof(struct sxgbe_tx_norm_desc),
+					      &tx_ring->dma_tx_phy, GFP_KERNEL);
+	if (!tx_ring->dma_tx)
+		return -ENOMEM;
+
+	/* allocate memory for TX skbuff array */
+	tx_ring->tx_skbuff_dma = devm_kcalloc(dev, tx_rsize,
+					      sizeof(dma_addr_t), GFP_KERNEL);
+	if (!tx_ring->tx_skbuff_dma)
+		goto dmamem_err;
+
+	tx_ring->tx_skbuff = devm_kcalloc(dev, tx_rsize,
+					  sizeof(struct sk_buff *), GFP_KERNEL);
+
+	if (!tx_ring->tx_skbuff)
+		goto dmamem_err;
+
+	/* assign queue number */
+	tx_ring->queue_no = queue_no;
+
+	/* initalise counters */
+	tx_ring->dirty_tx = 0;
+	tx_ring->cur_tx = 0;
+
+	/* initalise TX queue lock */
+	spin_lock_init(&tx_ring->tx_lock);
+
+	return 0;
+
+dmamem_err:
+	dma_free_coherent(dev, tx_rsize * sizeof(struct sxgbe_tx_norm_desc),
+			  tx_ring->dma_tx, tx_ring->dma_tx_phy);
+	return -ENOMEM;
+}
+
+/**
+ * free_rx_ring - free the RX descriptor ring
+ * @dev: net device structure
+ * @rx_ring: ring to be intialised
+ * @rx_rsize: ring size
+ * Description:  this function initializes the DMA RX descriptor
+ */
+void free_rx_ring(struct device *dev, struct sxgbe_rx_queue *rx_ring,
+		  int rx_rsize)
+{
+	dma_free_coherent(dev, rx_rsize * sizeof(struct sxgbe_rx_norm_desc),
+			  rx_ring->dma_rx, rx_ring->dma_rx_phy);
+	kfree(rx_ring->rx_skbuff_dma);
+	kfree(rx_ring->rx_skbuff);
+}
+
+/**
+ * init_rx_ring - init the RX descriptor ring
+ * @dev: net device structure
+ * @rx_ring: ring to be intialised
+ * @rx_rsize: ring size
+ * Description:  this function initializes the DMA RX descriptor
+ */
+static int init_rx_ring(struct net_device *dev, u8 queue_no,
+			struct sxgbe_rx_queue *rx_ring,	int rx_rsize)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+	int desc_index;
+	unsigned int bfsize = 0;
+	unsigned int ret = 0;
+
+	/* Set the max buffer size according to the MTU. */
+	bfsize = ALIGN(dev->mtu + ETH_HLEN + ETH_FCS_LEN + NET_IP_ALIGN, 8);
+
+	netif_dbg(priv, probe, dev, "%s: bfsize %d\n", __func__, bfsize);
+
+	/* RX ring is not allcoated */
+	if (rx_ring == NULL) {
+		netdev_err(dev, "No memory for RX queue\n");
+		goto error;
+	}
+
+	/* assign queue number */
+	rx_ring->queue_no = queue_no;
+
+	/* allocate memory for RX descriptors */
+	rx_ring->dma_rx = dma_zalloc_coherent(priv->device,
+					      rx_rsize * sizeof(struct sxgbe_rx_norm_desc),
+					      &rx_ring->dma_rx_phy, GFP_KERNEL);
+
+	if (rx_ring->dma_rx == NULL)
+		goto error;
+
+	/* allocate memory for RX skbuff array */
+	rx_ring->rx_skbuff_dma = kmalloc_array(rx_rsize,
+					       sizeof(dma_addr_t), GFP_KERNEL);
+	if (rx_ring->rx_skbuff_dma == NULL)
+		goto dmamem_err;
+
+	rx_ring->rx_skbuff = kmalloc_array(rx_rsize,
+					   sizeof(struct sk_buff *), GFP_KERNEL);
+	if (rx_ring->rx_skbuff == NULL)
+		goto rxbuff_err;
+
+	/* initialise the buffers */
+	for (desc_index = 0; desc_index < rx_rsize; desc_index++) {
+		struct sxgbe_rx_norm_desc *p;
+		p = rx_ring->dma_rx + desc_index;
+		ret = sxgbe_init_rx_buffers(dev, p, desc_index,
+					    bfsize, rx_ring);
+		if (ret)
+			goto err_init_rx_buffers;
+	}
+
+	/* initalise counters */
+	rx_ring->cur_rx = 0;
+	rx_ring->dirty_rx = (unsigned int)(desc_index - rx_rsize);
+	priv->dma_buf_sz = bfsize;
+
+	return 0;
+
+err_init_rx_buffers:
+	while (--desc_index >= 0)
+		free_rx_ring(priv->device, rx_ring, desc_index);
+	kfree(rx_ring->rx_skbuff);
+rxbuff_err:
+	kfree(rx_ring->rx_skbuff_dma);
+dmamem_err:
+	dma_free_coherent(priv->device,
+			  rx_rsize * sizeof(struct sxgbe_rx_norm_desc),
+			  rx_ring->dma_rx, rx_ring->dma_rx_phy);
+error:
+	return -ENOMEM;
+}
+/**
+ * free_tx_ring - free the TX descriptor ring
+ * @dev: net device structure
+ * @tx_ring: ring to be intialised
+ * @tx_rsize: ring size
+ * Description:  this function initializes the DMA TX descriptor
+ */
+void free_tx_ring(struct device *dev, struct sxgbe_tx_queue *tx_ring,
+		  int tx_rsize)
+{
+	dma_free_coherent(dev, tx_rsize * sizeof(struct sxgbe_tx_norm_desc),
+			  tx_ring->dma_tx, tx_ring->dma_tx_phy);
+}
+
+/**
+ * init_dma_desc_rings - init the RX/TX descriptor rings
+ * @dev: net device structure
+ * Description:  this function initializes the DMA RX/TX descriptors
+ * and allocates the socket buffers. It suppors the chained and ring
+ * modes.
+ */
+static int init_dma_desc_rings(struct net_device *netd)
+{
+	int queue_num, ret;
+	struct sxgbe_priv_data *priv = netdev_priv(netd);
+	int tx_rsize = priv->dma_tx_size;
+	int rx_rsize = priv->dma_rx_size;
+
+	/* Allocate memory for queue structures and TX descs */
+	SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) {
+		ret = init_tx_ring(priv->device, queue_num,
+				   priv->txq[queue_num], tx_rsize);
+		if (ret) {
+			dev_err(&netd->dev, "TX DMA ring allocation failed!\n");
+			goto txalloc_err;
+		}
+
+		/* save private pointer in each ring this
+		 * pointer is needed during cleaing TX queue
+		 */
+		priv->txq[queue_num]->priv_ptr = priv;
+	}
+
+	/* Allocate memory for queue structures and RX descs */
+	SXGBE_FOR_EACH_QUEUE(SXGBE_RX_QUEUES, queue_num) {
+		ret = init_rx_ring(netd, queue_num,
+				   priv->rxq[queue_num], rx_rsize);
+		if (ret) {
+			netdev_err(netd, "RX DMA ring allocation failed!!\n");
+			goto rxalloc_err;
+		}
+
+		/* save private pointer in each ring this
+		 * pointer is needed during cleaing TX queue
+		 */
+		priv->rxq[queue_num]->priv_ptr = priv;
+	}
+
+	sxgbe_clear_descriptors(priv);
+
+	return 0;
+
+txalloc_err:
+	while (queue_num--)
+		free_tx_ring(priv->device, priv->txq[queue_num], tx_rsize);
+	return ret;
+
+rxalloc_err:
+	while (queue_num--)
+		free_rx_ring(priv->device, priv->rxq[queue_num], rx_rsize);
+	return ret;
+}
+
+static void tx_free_ring_skbufs(struct sxgbe_tx_queue *txqueue)
+{
+	int dma_desc;
+	struct sxgbe_priv_data *priv = txqueue->priv_ptr;
+	int tx_rsize = priv->dma_tx_size;
+
+	for (dma_desc = 0; dma_desc < tx_rsize; dma_desc++) {
+		struct sxgbe_tx_norm_desc *tdesc = txqueue->dma_tx + dma_desc;
+
+		if (txqueue->tx_skbuff_dma[dma_desc])
+			dma_unmap_single(priv->device,
+					 txqueue->tx_skbuff_dma[dma_desc],
+					 priv->hw->desc->get_tx_len(tdesc),
+					 DMA_TO_DEVICE);
+
+		dev_kfree_skb_any(txqueue->tx_skbuff[dma_desc]);
+		txqueue->tx_skbuff[dma_desc] = NULL;
+		txqueue->tx_skbuff_dma[dma_desc] = 0;
+	}
+}
+
+
+static void dma_free_tx_skbufs(struct sxgbe_priv_data *priv)
+{
+	int queue_num;
+
+	SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) {
+		struct sxgbe_tx_queue *tqueue = priv->txq[queue_num];
+		tx_free_ring_skbufs(tqueue);
+	}
+}
+
+static void free_dma_desc_resources(struct sxgbe_priv_data *priv)
+{
+	int queue_num;
+	int tx_rsize = priv->dma_tx_size;
+	int rx_rsize = priv->dma_rx_size;
+
+	/* Release the DMA TX buffers */
+	dma_free_tx_skbufs(priv);
+
+	/* Release the TX ring memory also */
+	SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) {
+		free_tx_ring(priv->device, priv->txq[queue_num], tx_rsize);
+	}
+
+	/* Release the RX ring memory also */
+	SXGBE_FOR_EACH_QUEUE(SXGBE_RX_QUEUES, queue_num) {
+		free_rx_ring(priv->device, priv->rxq[queue_num], rx_rsize);
+	}
+}
+
+static int txring_mem_alloc(struct sxgbe_priv_data *priv)
+{
+	int queue_num;
+
+	SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) {
+		priv->txq[queue_num] = devm_kmalloc(priv->device,
+						    sizeof(struct sxgbe_tx_queue), GFP_KERNEL);
+		if (!priv->txq[queue_num])
+			return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static int rxring_mem_alloc(struct sxgbe_priv_data *priv)
+{
+	int queue_num;
+
+	SXGBE_FOR_EACH_QUEUE(SXGBE_RX_QUEUES, queue_num) {
+		priv->rxq[queue_num] = devm_kmalloc(priv->device,
+						    sizeof(struct sxgbe_rx_queue), GFP_KERNEL);
+		if (!priv->rxq[queue_num])
+			return -ENOMEM;
+	}
+
+	return 0;
+}
+
+/**
+ *  sxgbe_mtl_operation_mode - HW MTL operation mode
+ *  @priv: driver private structure
+ *  Description: it sets the MTL operation mode: tx/rx MTL thresholds
+ *  or Store-And-Forward capability.
+ */
+static void sxgbe_mtl_operation_mode(struct sxgbe_priv_data *priv)
+{
+	int queue_num;
+
+	/* TX/RX threshold control */
+	if (likely(priv->plat->force_sf_dma_mode)) {
+		/* set TC mode for TX QUEUES */
+		SXGBE_FOR_EACH_QUEUE(priv->hw_cap.tx_mtl_queues, queue_num)
+			priv->hw->mtl->set_tx_mtl_mode(priv->ioaddr, queue_num,
+						       SXGBE_MTL_SFMODE);
+		priv->tx_tc = SXGBE_MTL_SFMODE;
+
+		/* set TC mode for RX QUEUES */
+		SXGBE_FOR_EACH_QUEUE(priv->hw_cap.rx_mtl_queues, queue_num)
+			priv->hw->mtl->set_rx_mtl_mode(priv->ioaddr, queue_num,
+						       SXGBE_MTL_SFMODE);
+		priv->rx_tc = SXGBE_MTL_SFMODE;
+	} else if (unlikely(priv->plat->force_thresh_dma_mode)) {
+		/* set TC mode for TX QUEUES */
+		SXGBE_FOR_EACH_QUEUE(priv->hw_cap.tx_mtl_queues, queue_num)
+			priv->hw->mtl->set_tx_mtl_mode(priv->ioaddr, queue_num,
+						       priv->tx_tc);
+		/* set TC mode for RX QUEUES */
+		SXGBE_FOR_EACH_QUEUE(priv->hw_cap.rx_mtl_queues, queue_num)
+			priv->hw->mtl->set_rx_mtl_mode(priv->ioaddr, queue_num,
+						       priv->rx_tc);
+	} else {
+		pr_err("ERROR: %s: Invalid TX threshold mode\n", __func__);
+	}
+}
+
+/**
+ * sxgbe_tx_queue_clean:
+ * @priv: driver private structure
+ * Description: it reclaims resources after transmission completes.
+ */
+static void sxgbe_tx_queue_clean(struct sxgbe_tx_queue *tqueue)
+{
+	struct sxgbe_priv_data *priv = tqueue->priv_ptr;
+	unsigned int tx_rsize = priv->dma_tx_size;
+	struct netdev_queue *dev_txq;
+	u8 queue_no = tqueue->queue_no;
+
+	dev_txq = netdev_get_tx_queue(priv->dev, queue_no);
+
+	spin_lock(&tqueue->tx_lock);
+
+	priv->xstats.tx_clean++;
+	while (tqueue->dirty_tx != tqueue->cur_tx) {
+		unsigned int entry = tqueue->dirty_tx % tx_rsize;
+		struct sk_buff *skb = tqueue->tx_skbuff[entry];
+		struct sxgbe_tx_norm_desc *p;
+
+		p = tqueue->dma_tx + entry;
+
+		/* Check if the descriptor is owned by the DMA. */
+		if (priv->hw->desc->get_tx_owner(p))
+			break;
+
+		if (netif_msg_tx_done(priv))
+			pr_debug("%s: curr %d, dirty %d\n",
+				 __func__, tqueue->cur_tx, tqueue->dirty_tx);
+
+		if (likely(tqueue->tx_skbuff_dma[entry])) {
+			dma_unmap_single(priv->device,
+					 tqueue->tx_skbuff_dma[entry],
+					 priv->hw->desc->get_tx_len(p),
+					 DMA_TO_DEVICE);
+			tqueue->tx_skbuff_dma[entry] = 0;
+		}
+
+		if (likely(skb)) {
+			dev_kfree_skb(skb);
+			tqueue->tx_skbuff[entry] = NULL;
+		}
+
+		priv->hw->desc->release_tx_desc(p);
+
+		tqueue->dirty_tx++;
+	}
+
+	/* wake up queue */
+	if (unlikely(netif_tx_queue_stopped(dev_txq) &&
+		     sxgbe_tx_avail(tqueue, tx_rsize) > SXGBE_TX_THRESH(priv))) {
+		netif_tx_lock(priv->dev);
+		if (netif_tx_queue_stopped(dev_txq) &&
+		    sxgbe_tx_avail(tqueue, tx_rsize) > SXGBE_TX_THRESH(priv)) {
+			if (netif_msg_tx_done(priv))
+				pr_debug("%s: restart transmit\n", __func__);
+			netif_tx_wake_queue(dev_txq);
+		}
+		netif_tx_unlock(priv->dev);
+	}
+
+	spin_unlock(&tqueue->tx_lock);
+}
+
+/**
+ * sxgbe_tx_clean:
+ * @priv: driver private structure
+ * Description: it reclaims resources after transmission completes.
+ */
+static void sxgbe_tx_all_clean(struct sxgbe_priv_data *priv)
+{
+	u8 queue_num;
+
+	SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) {
+		struct sxgbe_tx_queue *tqueue = priv->txq[queue_num];
+		sxgbe_tx_queue_clean(tqueue);
+	}
+}
+
+/**
+ * sxgbe_restart_tx_queue: irq tx error mng function
+ * @priv: driver private structure
+ * Description: it cleans the descriptors and restarts the transmission
+ * in case of errors.
+ */
+static void sxgbe_restart_tx_queue(struct sxgbe_priv_data *priv, int queue_num)
+{
+	struct sxgbe_tx_queue *tx_ring = priv->txq[queue_num];
+	struct netdev_queue *dev_txq = netdev_get_tx_queue(priv->dev,
+							   queue_num);
+
+	/* stop the queue */
+	netif_tx_stop_queue(dev_txq);
+
+	/* stop the tx dma */
+	priv->hw->dma->stop_tx_queue(priv->ioaddr, queue_num);
+
+	/* free the skbuffs of the ring */
+	tx_free_ring_skbufs(tx_ring);
+
+	/* initalise counters */
+	tx_ring->cur_tx = 0;
+	tx_ring->dirty_tx = 0;
+
+	/* start the tx dma */
+	priv->hw->dma->start_tx_queue(priv->ioaddr, queue_num);
+
+	priv->dev->stats.tx_errors++;
+
+	/* wakeup the queue */
+	netif_tx_wake_queue(dev_txq);
+}
+
+/**
+ * sxgbe_reset_all_tx_queues: irq tx error mng function
+ * @priv: driver private structure
+ * Description: it cleans all the descriptors and
+ * restarts the transmission on all queues in case of errors.
+ */
+static void sxgbe_reset_all_tx_queues(struct sxgbe_priv_data *priv)
+{
+	int queue_num;
+
+	/* On TX timeout of net device, resetting of all queues
+	 * may not be proper way, revisit this later if needed
+	 */
+	SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num)
+		sxgbe_restart_tx_queue(priv, queue_num);
+}
+
+/**
+ * sxgbe_get_hw_features: get XMAC capabilities from the HW cap. register.
+ * @priv: driver private structure
+ * Description:
+ *  new GMAC chip generations have a new register to indicate the
+ *  presence of the optional feature/functions.
+ *  This can be also used to override the value passed through the
+ *  platform and necessary for old MAC10/100 and GMAC chips.
+ */
+static int sxgbe_get_hw_features(struct sxgbe_priv_data * const priv)
+{
+	int rval = 0;
+	struct sxgbe_hw_features *features = &priv->hw_cap;
+
+	/* Read First Capability Register CAP[0] */
+	rval = priv->hw->mac->get_hw_feature(priv->ioaddr, 0);
+	if (rval) {
+		features->pmt_remote_wake_up =
+			SXGBE_HW_FEAT_PMT_TEMOTE_WOP(rval);
+		features->pmt_magic_frame = SXGBE_HW_FEAT_PMT_MAGIC_PKT(rval);
+		features->atime_stamp = SXGBE_HW_FEAT_IEEE1500_2008(rval);
+		features->tx_csum_offload =
+			SXGBE_HW_FEAT_TX_CSUM_OFFLOAD(rval);
+		features->rx_csum_offload =
+			SXGBE_HW_FEAT_RX_CSUM_OFFLOAD(rval);
+		features->multi_macaddr = SXGBE_HW_FEAT_MACADDR_COUNT(rval);
+		features->tstamp_srcselect = SXGBE_HW_FEAT_TSTMAP_SRC(rval);
+		features->sa_vlan_insert = SXGBE_HW_FEAT_SRCADDR_VLAN(rval);
+	}
+	/* Read First Capability Register CAP[1] */
+	rval = priv->hw->mac->get_hw_feature(priv->ioaddr, 1);
+	if (rval) {
+		features->rxfifo_size = SXGBE_HW_FEAT_RX_FIFO_SIZE(rval);
+		features->txfifo_size = SXGBE_HW_FEAT_TX_FIFO_SIZE(rval);
+		features->atstmap_hword = SXGBE_HW_FEAT_TX_FIFO_SIZE(rval);
+		features->dcb_enable = SXGBE_HW_FEAT_DCB(rval);
+		features->splithead_enable = SXGBE_HW_FEAT_SPLIT_HDR(rval);
+		features->tcpseg_offload = SXGBE_HW_FEAT_TSO(rval);
+		features->debug_mem = SXGBE_HW_FEAT_DEBUG_MEM_IFACE(rval);
+		features->rss_enable = SXGBE_HW_FEAT_RSS(rval);
+		features->hash_tsize = SXGBE_HW_FEAT_HASH_TABLE_SIZE(rval);
+		features->l3l4_filer_size = SXGBE_HW_FEAT_L3L4_FILTER_NUM(rval);
+	}
+
+	/* Read First Capability Register CAP[2] */
+	rval = priv->hw->mac->get_hw_feature(priv->ioaddr, 2);
+	if (rval) {
+		features->rx_mtl_queues = SXGBE_HW_FEAT_RX_MTL_QUEUES(rval);
+		features->tx_mtl_queues = SXGBE_HW_FEAT_TX_MTL_QUEUES(rval);
+		features->rx_dma_channels = SXGBE_HW_FEAT_RX_DMA_CHANNELS(rval);
+		features->tx_dma_channels = SXGBE_HW_FEAT_TX_DMA_CHANNELS(rval);
+		features->pps_output_count = SXGBE_HW_FEAT_PPS_OUTPUTS(rval);
+		features->aux_input_count = SXGBE_HW_FEAT_AUX_SNAPSHOTS(rval);
+	}
+
+	return rval;
+}
+
+/**
+ * sxgbe_check_ether_addr: check if the MAC addr is valid
+ * @priv: driver private structure
+ * Description:
+ * it is to verify if the MAC address is valid, in case of failures it
+ * generates a random MAC address
+ */
+static void sxgbe_check_ether_addr(struct sxgbe_priv_data *priv)
+{
+	if (!is_valid_ether_addr(priv->dev->dev_addr)) {
+		priv->hw->mac->get_umac_addr((void __iomem *)
+					     priv->ioaddr,
+					     priv->dev->dev_addr, 0);
+		if (!is_valid_ether_addr(priv->dev->dev_addr))
+			eth_hw_addr_random(priv->dev);
+	}
+	dev_info(priv->device, "device MAC address %pM\n",
+		 priv->dev->dev_addr);
+}
+
+/**
+ * sxgbe_init_dma_engine: DMA init.
+ * @priv: driver private structure
+ * Description:
+ * It inits the DMA invoking the specific SXGBE callback.
+ * Some DMA parameters can be passed from the platform;
+ * in case of these are not passed a default is kept for the MAC or GMAC.
+ */
+static int sxgbe_init_dma_engine(struct sxgbe_priv_data *priv)
+{
+	int pbl = DEFAULT_DMA_PBL, fixed_burst = 0, burst_map = 0;
+	int adv_addr_mode = 1;
+	int queue_num;
+
+	if (priv->plat->dma_cfg) {
+		pbl = priv->plat->dma_cfg->pbl;
+		fixed_burst = priv->plat->dma_cfg->fixed_burst;
+		burst_map = priv->plat->dma_cfg->burst_map;
+		adv_addr_mode = priv->plat->dma_cfg->adv_addr_mode;
+	}
+
+	SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num)
+		priv->hw->dma->cha_init(priv->ioaddr, queue_num,
+					fixed_burst, pbl,
+					(priv->txq[queue_num])->dma_tx_phy,
+					(priv->rxq[queue_num])->dma_rx_phy,
+					priv->dma_tx_size, priv->dma_rx_size);
+
+	return priv->hw->dma->init(priv->ioaddr, fixed_burst,
+				   burst_map, adv_addr_mode);
+}
+
+/**
+ * sxgbe_init_mtl_engine: MTL init.
+ * @priv: driver private structure
+ * Description:
+ * It inits the MTL invoking the specific SXGBE callback.
+ */
+static void sxgbe_init_mtl_engine(struct sxgbe_priv_data *priv)
+{
+	int queue_num;
+
+	SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) {
+		priv->hw->mtl->mtl_set_txfifosize(priv->ioaddr, queue_num,
+						  priv->hw_cap.tx_mtl_qsize);
+		priv->hw->mtl->mtl_enable_txqueue(priv->ioaddr, queue_num);
+	}
+}
+
+/**
+ * sxgbe_disable_mtl_engine: MTL disable.
+ * @priv: driver private structure
+ * Description:
+ * It disables the MTL queues by invoking the specific SXGBE callback.
+ */
+static void sxgbe_disable_mtl_engine(struct sxgbe_priv_data *priv)
+{
+	int queue_num;
+
+	SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num)
+		priv->hw->mtl->mtl_disable_txqueue(priv->ioaddr, queue_num);
+}
+
+
+/**
+ * sxgbe_tx_timer: mitigation sw timer for tx.
+ * @data: data pointer
+ * Description:
+ * This is the timer handler to directly invoke the sxgbe_tx_clean.
+ */
+static void sxgbe_tx_timer(unsigned long data)
+{
+	struct sxgbe_tx_queue *p = (struct sxgbe_tx_queue *)data;
+	sxgbe_tx_queue_clean(p);
+}
+
+/**
+ * sxgbe_init_tx_coalesce: init tx mitigation options.
+ * @priv: driver private structure
+ * Description:
+ * This inits the transmit coalesce parameters: i.e. timer rate,
+ * timer handler and default threshold used for enabling the
+ * interrupt on completion bit.
+ */
+static void sxgbe_tx_init_coalesce(struct sxgbe_priv_data *priv)
+{
+	u8 queue_num;
+
+	SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) {
+		struct sxgbe_tx_queue *p = priv->txq[queue_num];
+		p->tx_coal_frames =  SXGBE_TX_FRAMES;
+		p->tx_coal_timer = SXGBE_COAL_TX_TIMER;
+		init_timer(&p->txtimer);
+		p->txtimer.expires = SXGBE_COAL_TIMER(p->tx_coal_timer);
+		p->txtimer.data = (unsigned long)&priv->txq[queue_num];
+		p->txtimer.function = sxgbe_tx_timer;
+		add_timer(&p->txtimer);
+	}
+}
+
+static void sxgbe_tx_del_timer(struct sxgbe_priv_data *priv)
+{
+	u8 queue_num;
+
+	SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) {
+		struct sxgbe_tx_queue *p = priv->txq[queue_num];
+		del_timer_sync(&p->txtimer);
+	}
+}
+
+/**
+ *  sxgbe_open - open entry point of the driver
+ *  @dev : pointer to the device structure.
+ *  Description:
+ *  This function is the open entry point of the driver.
+ *  Return value:
+ *  0 on success and an appropriate (-)ve integer as defined in errno.h
+ *  file on failure.
+ */
+static int sxgbe_open(struct net_device *dev)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+	int ret, queue_num;
+
+	clk_prepare_enable(priv->sxgbe_clk);
+
+	sxgbe_check_ether_addr(priv);
+
+	/* Init the phy */
+	ret = sxgbe_init_phy(dev);
+	if (ret) {
+		netdev_err(dev, "%s: Cannot attach to PHY (error: %d)\n",
+			   __func__, ret);
+		goto phy_error;
+	}
+
+	/* Create and initialize the TX/RX descriptors chains. */
+	priv->dma_tx_size = SXGBE_ALIGN(DMA_TX_SIZE);
+	priv->dma_rx_size = SXGBE_ALIGN(DMA_RX_SIZE);
+	priv->dma_buf_sz = SXGBE_ALIGN(DMA_BUFFER_SIZE);
+	priv->tx_tc = TC_DEFAULT;
+	priv->rx_tc = TC_DEFAULT;
+	init_dma_desc_rings(dev);
+
+	/* DMA initialization and SW reset */
+	ret = sxgbe_init_dma_engine(priv);
+	if (ret < 0) {
+		netdev_err(dev, "%s: DMA initialization failed\n", __func__);
+		goto init_error;
+	}
+
+	/*  MTL initialization */
+	sxgbe_init_mtl_engine(priv);
+
+	/* Copy the MAC addr into the HW  */
+	priv->hw->mac->set_umac_addr(priv->ioaddr, dev->dev_addr, 0);
+
+	/* Initialize the MAC Core */
+	priv->hw->mac->core_init(priv->ioaddr);
+
+	/* Request the IRQ lines */
+	ret = devm_request_irq(priv->device, priv->irq, sxgbe_common_interrupt,
+			       IRQF_SHARED, dev->name, dev);
+	if (unlikely(ret < 0)) {
+		netdev_err(dev, "%s: ERROR: allocating the IRQ %d (error: %d)\n",
+			   __func__, priv->irq, ret);
+		goto init_error;
+	}
+
+	/* Request TX DMA irq lines */
+	SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) {
+		ret = devm_request_irq(priv->device,
+				       (priv->txq[queue_num])->irq_no,
+				       sxgbe_tx_interrupt, 0,
+				       dev->name, priv->txq[queue_num]);
+		if (unlikely(ret < 0)) {
+			netdev_err(dev, "%s: ERROR: allocating TX IRQ %d (error: %d)\n",
+				   __func__, priv->irq, ret);
+			goto init_error;
+		}
+	}
+
+	/* Request RX DMA irq lines */
+	SXGBE_FOR_EACH_QUEUE(SXGBE_RX_QUEUES, queue_num) {
+		ret = devm_request_irq(priv->device,
+				       (priv->rxq[queue_num])->irq_no,
+				       sxgbe_rx_interrupt, 0,
+				       dev->name, priv->rxq[queue_num]);
+		if (unlikely(ret < 0)) {
+			netdev_err(dev, "%s: ERROR: allocating TX IRQ %d (error: %d)\n",
+				   __func__, priv->irq, ret);
+			goto init_error;
+		}
+	}
+
+	/* Enable the MAC Rx/Tx */
+	priv->hw->mac->enable_tx(priv->ioaddr, true);
+	priv->hw->mac->enable_rx(priv->ioaddr, true);
+
+	/* Set the HW DMA mode and the COE */
+	sxgbe_mtl_operation_mode(priv);
+
+	/* Extra statistics */
+	memset(&priv->xstats, 0, sizeof(struct sxgbe_extra_stats));
+
+	priv->xstats.tx_threshold = priv->tx_tc;
+	priv->xstats.rx_threshold = priv->rx_tc;
+
+	/* Start the ball rolling... */
+	netdev_dbg(dev, "DMA RX/TX processes started...\n");
+	priv->hw->dma->start_tx(priv->ioaddr, SXGBE_TX_QUEUES);
+	priv->hw->dma->start_rx(priv->ioaddr, SXGBE_RX_QUEUES);
+
+	if (priv->phydev)
+		phy_start(priv->phydev);
+
+	/* initalise TX coalesce parameters */
+	sxgbe_tx_init_coalesce(priv);
+
+	if ((priv->use_riwt) && (priv->hw->dma->rx_watchdog)) {
+		priv->rx_riwt = SXGBE_MAX_DMA_RIWT;
+		priv->hw->dma->rx_watchdog(priv->ioaddr, SXGBE_MAX_DMA_RIWT);
+	}
+
+	napi_enable(&priv->napi);
+	netif_start_queue(dev);
+
+	return 0;
+
+init_error:
+	free_dma_desc_resources(priv);
+	if (priv->phydev)
+		phy_disconnect(priv->phydev);
+phy_error:
+	clk_disable_unprepare(priv->sxgbe_clk);
+
+	return ret;
+}
+
+/**
+ *  sxgbe_release - close entry point of the driver
+ *  @dev : device pointer.
+ *  Description:
+ *  This is the stop entry point of the driver.
+ */
+static int sxgbe_release(struct net_device *dev)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+
+	/* Stop and disconnect the PHY */
+	if (priv->phydev) {
+		phy_stop(priv->phydev);
+		phy_disconnect(priv->phydev);
+		priv->phydev = NULL;
+	}
+
+	netif_tx_stop_all_queues(dev);
+
+	napi_disable(&priv->napi);
+
+	/* delete TX timers */
+	sxgbe_tx_del_timer(priv);
+
+	/* Stop TX/RX DMA and clear the descriptors */
+	priv->hw->dma->stop_tx(priv->ioaddr, SXGBE_TX_QUEUES);
+	priv->hw->dma->stop_rx(priv->ioaddr, SXGBE_RX_QUEUES);
+
+	/* disable MTL queue */
+	sxgbe_disable_mtl_engine(priv);
+
+	/* Release and free the Rx/Tx resources */
+	free_dma_desc_resources(priv);
+
+	/* Disable the MAC Rx/Tx */
+	priv->hw->mac->enable_tx(priv->ioaddr, false);
+	priv->hw->mac->enable_rx(priv->ioaddr, false);
+
+	netif_carrier_off(dev);
+
+	clk_disable_unprepare(priv->sxgbe_clk);
+
+	return 0;
+}
+
+/**
+ *  sxgbe_xmit: Tx entry point of the driver
+ *  @skb : the socket buffer
+ *  @dev : device pointer
+ *  Description : this is the tx entry point of the driver.
+ *  It programs the chain or the ring and supports oversized frames
+ *  and SG feature.
+ */
+static netdev_tx_t sxgbe_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	unsigned int entry, frag_num;
+	struct netdev_queue *dev_txq;
+	unsigned txq_index = skb_get_queue_mapping(skb);
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+	unsigned int tx_rsize = priv->dma_tx_size;
+	struct sxgbe_tx_queue *tqueue = priv->txq[txq_index];
+	struct sxgbe_tx_norm_desc *tx_desc, *first_desc;
+	int nr_frags = skb_shinfo(skb)->nr_frags;
+	int no_pagedlen = skb_headlen(skb);
+	int is_jumbo = 0;
+
+	/* get the TX queue handle */
+	dev_txq = netdev_get_tx_queue(dev, txq_index);
+
+	/* get the spinlock */
+	spin_lock(&tqueue->tx_lock);
+
+	if (unlikely(sxgbe_tx_avail(tqueue, tx_rsize) < nr_frags + 1)) {
+		if (!netif_tx_queue_stopped(dev_txq)) {
+			netif_tx_stop_queue(dev_txq);
+			netdev_err(dev, "%s: Tx Ring is full when %d queue is awake\n",
+				   __func__, txq_index);
+		}
+		/* release the spin lock in case of BUSY */
+		spin_unlock(&tqueue->tx_lock);
+		return NETDEV_TX_BUSY;
+	}
+
+	entry = tqueue->cur_tx % tx_rsize;
+	tx_desc = tqueue->dma_tx + entry;
+
+	first_desc = tx_desc;
+
+	/* save the skb address */
+	tqueue->tx_skbuff[entry] = skb;
+
+	if (!is_jumbo) {
+		tx_desc->tdes01 = dma_map_single(priv->device, skb->data,
+						   no_pagedlen, DMA_TO_DEVICE);
+		if (dma_mapping_error(priv->device, tx_desc->tdes01))
+			pr_err("%s: TX dma mapping failed!!\n", __func__);
+
+		priv->hw->desc->prepare_tx_desc(tx_desc, 1, no_pagedlen,
+						no_pagedlen);
+	}
+
+	for (frag_num = 0; frag_num < nr_frags; frag_num++) {
+		const skb_frag_t *frag = &skb_shinfo(skb)->frags[frag_num];
+		int len = skb_frag_size(frag);
+
+		entry = (++tqueue->cur_tx) % tx_rsize;
+		tx_desc = tqueue->dma_tx + entry;
+		tx_desc->tdes01 = skb_frag_dma_map(priv->device, frag, 0, len,
+						   DMA_TO_DEVICE);
+
+		tqueue->tx_skbuff_dma[entry] = tx_desc->tdes01;
+		tqueue->tx_skbuff[entry] = NULL;
+
+		/* prepare the descriptor */
+		priv->hw->desc->prepare_tx_desc(tx_desc, 0, len,
+						len);
+		/* memory barrier to flush descriptor */
+		wmb();
+
+		/* set the owner */
+		priv->hw->desc->set_tx_owner(tx_desc);
+	}
+
+	/* close the descriptors */
+	priv->hw->desc->close_tx_desc(tx_desc);
+
+	/* memory barrier to flush descriptor */
+	wmb();
+
+	tqueue->tx_count_frames += nr_frags + 1;
+	if (tqueue->tx_count_frames > tqueue->tx_coal_frames) {
+		priv->hw->desc->clear_tx_ic(tx_desc);
+		priv->xstats.tx_reset_ic_bit++;
+		mod_timer(&tqueue->txtimer,
+			  SXGBE_COAL_TIMER(tqueue->tx_coal_timer));
+	} else {
+		tqueue->tx_count_frames = 0;
+	}
+
+	/* set owner for first desc */
+	priv->hw->desc->set_tx_owner(first_desc);
+
+	/* memory barrier to flush descriptor */
+	wmb();
+
+	tqueue->cur_tx++;
+
+	/* display current ring */
+	netif_dbg(priv, pktdata, dev, "%s: curr %d dirty=%d entry=%d, first=%p, nfrags=%d\n",
+		  __func__, tqueue->cur_tx % tx_rsize,
+		  tqueue->dirty_tx % tx_rsize, entry,
+		  first_desc, nr_frags);
+
+	if (unlikely(sxgbe_tx_avail(tqueue, tx_rsize) <= (MAX_SKB_FRAGS + 1))) {
+		netif_dbg(priv, hw, dev, "%s: stop transmitted packets\n",
+			  __func__);
+		netif_tx_stop_queue(dev_txq);
+	}
+
+	dev->stats.tx_bytes += skb->len;
+
+	if (unlikely((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
+		     tqueue->hwts_tx_en)) {
+		/* declare that device is doing timestamping */
+		skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
+		priv->hw->desc->tx_enable_tstamp(first_desc);
+	}
+
+	if (!tqueue->hwts_tx_en)
+		skb_tx_timestamp(skb);
+
+	priv->hw->dma->enable_dma_transmission(priv->ioaddr, txq_index);
+
+	spin_unlock(&tqueue->tx_lock);
+
+	return NETDEV_TX_OK;
+}
+
+/**
+ * sxgbe_rx_refill: refill used skb preallocated buffers
+ * @priv: driver private structure
+ * Description : this is to reallocate the skb for the reception process
+ * that is based on zero-copy.
+ */
+static void sxgbe_rx_refill(struct sxgbe_priv_data *priv)
+{
+	unsigned int rxsize = priv->dma_rx_size;
+	int bfsize = priv->dma_buf_sz;
+	u8 qnum = priv->cur_rx_qnum;
+
+	for (; priv->rxq[qnum]->cur_rx - priv->rxq[qnum]->dirty_rx > 0;
+	     priv->rxq[qnum]->dirty_rx++) {
+		unsigned int entry = priv->rxq[qnum]->dirty_rx % rxsize;
+		struct sxgbe_rx_norm_desc *p;
+
+		p = priv->rxq[qnum]->dma_rx + entry;
+
+		if (likely(priv->rxq[qnum]->rx_skbuff[entry] == NULL)) {
+			struct sk_buff *skb;
+
+			skb = netdev_alloc_skb_ip_align(priv->dev, bfsize);
+
+			if (unlikely(skb == NULL))
+				break;
+
+			priv->rxq[qnum]->rx_skbuff[entry] = skb;
+			priv->rxq[qnum]->rx_skbuff_dma[entry] =
+				dma_map_single(priv->device, skb->data, bfsize,
+					       DMA_FROM_DEVICE);
+
+			p->rdes23.rx_rd_des23.buf2_addr =
+				priv->rxq[qnum]->rx_skbuff_dma[entry];
+		}
+
+		/* Added memory barrier for RX descriptor modification */
+		wmb();
+		priv->hw->desc->set_rx_owner(p);
+		/* Added memory barrier for RX descriptor modification */
+		wmb();
+	}
+}
+
+/**
+ * sxgbe_rx: receive the frames from the remote host
+ * @priv: driver private structure
+ * @limit: napi bugget.
+ * Description :  this the function called by the napi poll method.
+ * It gets all the frames inside the ring.
+ */
+static int sxgbe_rx(struct sxgbe_priv_data *priv, int limit)
+{
+	u8 qnum = priv->cur_rx_qnum;
+	unsigned int rxsize = priv->dma_rx_size;
+	unsigned int entry = priv->rxq[qnum]->cur_rx;
+	unsigned int next_entry = 0;
+	unsigned int count = 0;
+
+	while (count < limit) {
+		struct sxgbe_rx_norm_desc *p;
+		struct sk_buff *skb;
+		int frame_len;
+
+		p = priv->rxq[qnum]->dma_rx + entry;
+
+		if (priv->hw->desc->get_rx_owner(p))
+			break;
+
+		count++;
+
+		next_entry = (++priv->rxq[qnum]->cur_rx) % rxsize;
+		prefetch(priv->rxq[qnum]->dma_rx + next_entry);
+
+		/*TO DO read the status of the incoming frame */
+
+		skb = priv->rxq[qnum]->rx_skbuff[entry];
+
+		if (unlikely(!skb))
+			netdev_err(priv->dev, "rx descriptor is not consistent\n");
+
+		prefetch(skb->data - NET_IP_ALIGN);
+		priv->rxq[qnum]->rx_skbuff[entry] = NULL;
+
+		frame_len = priv->hw->desc->get_rx_frame_len(p);
+
+		skb_put(skb, frame_len);
+
+		netif_receive_skb(skb);
+
+		entry = next_entry;
+	}
+
+	sxgbe_rx_refill(priv);
+
+	return count;
+}
+
+/**
+ *  sxgbe_poll - sxgbe poll method (NAPI)
+ *  @napi : pointer to the napi structure.
+ *  @budget : maximum number of packets that the current CPU can receive from
+ *	      all interfaces.
+ *  Description :
+ *  To look at the incoming frames and clear the tx resources.
+ */
+static int sxgbe_poll(struct napi_struct *napi, int budget)
+{
+	struct sxgbe_priv_data *priv = container_of(napi,
+						    struct sxgbe_priv_data, napi);
+	int work_done = 0;
+	u8 qnum = priv->cur_rx_qnum;
+
+	priv->xstats.napi_poll++;
+	/* first, clean the tx queues */
+	sxgbe_tx_all_clean(priv);
+
+	work_done = sxgbe_rx(priv, budget);
+	if (work_done < budget) {
+		napi_complete(napi);
+		priv->hw->dma->enable_dma_irq(priv->ioaddr, qnum);
+	}
+
+	return work_done;
+}
+
+/**
+ *  sxgbe_tx_timeout
+ *  @dev : Pointer to net device structure
+ *  Description: this function is called when a packet transmission fails to
+ *   complete within a reasonable time. The driver will mark the error in the
+ *   netdev structure and arrange for the device to be reset to a sane state
+ *   in order to transmit a new packet.
+ */
+static void sxgbe_tx_timeout(struct net_device *dev)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+	sxgbe_reset_all_tx_queues(priv);
+}
+
+/**
+ *  sxgbe_common_interrupt - main ISR
+ *  @irq: interrupt number.
+ *  @dev_id: to pass the net device pointer.
+ *  Description: this is the main driver interrupt service routine.
+ *  It calls the DMA ISR and also the core ISR to manage PMT, MMC, LPI
+ *  interrupts.
+ */
+static irqreturn_t sxgbe_common_interrupt(int irq, void *dev_id)
+{
+	return IRQ_HANDLED;
+}
+
+/**
+ *  sxgbe_tx_interrupt - TX DMA ISR
+ *  @irq: interrupt number.
+ *  @dev_id: to pass the net device pointer.
+ *  Description: this is the tx dma interrupt service routine.
+ */
+static irqreturn_t sxgbe_tx_interrupt(int irq, void *dev_id)
+{
+	int status;
+	struct sxgbe_tx_queue *txq = (struct sxgbe_tx_queue *)dev_id;
+	struct sxgbe_priv_data *priv = txq->priv_ptr;
+
+	/* get the channel status */
+	status = priv->hw->dma->tx_dma_int_status(priv->ioaddr, txq->queue_no,
+						  &priv->xstats);
+	/* check for normal path */
+	if (likely((status & handle_tx)))
+		napi_schedule(&priv->napi);
+
+	/* check for unrecoverable error */
+	if (unlikely((status & tx_hard_error)))
+		sxgbe_restart_tx_queue(priv, txq->queue_no);
+
+	/* check for TC configuration change */
+	if (unlikely((status & tx_bump_tc) &&
+		     (priv->tx_tc != SXGBE_MTL_SFMODE) &&
+		     (priv->tx_tc < 512))) {
+		/* step of TX TC is 32 till 128, otherwise 64 */
+		priv->tx_tc += (priv->tx_tc < 128) ? 32 : 64;
+		priv->hw->mtl->set_tx_mtl_mode(priv->ioaddr,
+					       txq->queue_no, priv->tx_tc);
+		priv->xstats.tx_threshold = priv->tx_tc;
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ *  sxgbe_rx_interrupt - RX DMA ISR
+ *  @irq: interrupt number.
+ *  @dev_id: to pass the net device pointer.
+ *  Description: this is the rx dma interrupt service routine.
+ */
+static irqreturn_t sxgbe_rx_interrupt(int irq, void *dev_id)
+{
+	int status;
+	struct sxgbe_rx_queue *rxq = (struct sxgbe_rx_queue *)dev_id;
+	struct sxgbe_priv_data *priv = rxq->priv_ptr;
+
+	/* get the channel status */
+	status = priv->hw->dma->rx_dma_int_status(priv->ioaddr, rxq->queue_no,
+						  &priv->xstats);
+
+	if (likely((status & handle_rx) && (napi_schedule_prep(&priv->napi)))) {
+		priv->hw->dma->disable_dma_irq(priv->ioaddr, rxq->queue_no);
+		__napi_schedule(&priv->napi);
+	}
+
+	/* check for TC configuration change */
+	if (unlikely((status & rx_bump_tc) &&
+		     (priv->rx_tc != SXGBE_MTL_SFMODE) &&
+		     (priv->rx_tc < 128))) {
+		/* step of TC is 32 */
+		priv->rx_tc += 32;
+		priv->hw->mtl->set_rx_mtl_mode(priv->ioaddr,
+					       rxq->queue_no, priv->rx_tc);
+		priv->xstats.rx_threshold = priv->rx_tc;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static inline u64 sxgbe_get_stat64(void __iomem *ioaddr, int reg_lo, int reg_hi)
+{
+	u64 val = readl(ioaddr + reg_lo);
+
+	val |= ((u64)readl(ioaddr + reg_hi)) << 32;
+
+	return val;
+}
+
+
+/*  sxgbe_get_stats64 - entry point to see statistical information of device
+ *  @dev : device pointer.
+ *  @stats : pointer to hold all the statistical information of device.
+ *  Description:
+ *  This function is a driver entry point whenever ifconfig command gets
+ *  executed to see device statistics. Statistics are number of
+ *  bytes sent or received, errors occured etc.
+ *  Return value:
+ *  This function returns various statistical information of device.
+ */
+static struct rtnl_link_stats64 *sxgbe_get_stats64(struct net_device *dev,
+						   struct rtnl_link_stats64 *stats)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+	void __iomem *ioaddr = priv->ioaddr;
+	u64 count;
+
+	spin_lock(&priv->stats_lock);
+	/* Freeze the counter registers before reading value otherwise it may
+	 * get updated by hardware while we are reading them
+	 */
+	writel(SXGBE_MMC_CTRL_CNT_FRZ, ioaddr + SXGBE_MMC_CTL_REG);
+
+	stats->rx_bytes = sxgbe_get_stat64(ioaddr,
+					   SXGBE_MMC_RXOCTETLO_GCNT_REG,
+					   SXGBE_MMC_RXOCTETHI_GCNT_REG);
+
+	stats->rx_packets = sxgbe_get_stat64(ioaddr,
+					     SXGBE_MMC_RXFRAMELO_GBCNT_REG,
+					     SXGBE_MMC_RXFRAMEHI_GBCNT_REG);
+
+	stats->multicast = sxgbe_get_stat64(ioaddr,
+					    SXGBE_MMC_RXMULTILO_GCNT_REG,
+					    SXGBE_MMC_RXMULTIHI_GCNT_REG);
+
+	stats->rx_crc_errors = sxgbe_get_stat64(ioaddr,
+						SXGBE_MMC_RXCRCERRLO_REG,
+						SXGBE_MMC_RXCRCERRHI_REG);
+
+	stats->rx_length_errors = sxgbe_get_stat64(ioaddr,
+						  SXGBE_MMC_RXLENERRLO_REG,
+						  SXGBE_MMC_RXLENERRHI_REG);
+
+	stats->rx_missed_errors = sxgbe_get_stat64(ioaddr,
+						   SXGBE_MMC_RXFIFOOVERFLOWLO_GBCNT_REG,
+						   SXGBE_MMC_RXFIFOOVERFLOWHI_GBCNT_REG);
+
+	stats->tx_bytes = sxgbe_get_stat64(ioaddr,
+					   SXGBE_MMC_TXOCTETLO_GCNT_REG,
+					   SXGBE_MMC_TXOCTETHI_GCNT_REG);
+
+	count = sxgbe_get_stat64(ioaddr, SXGBE_MMC_TXFRAMELO_GBCNT_REG,
+				 SXGBE_MMC_TXFRAMEHI_GBCNT_REG);
+
+	stats->tx_errors = sxgbe_get_stat64(ioaddr, SXGBE_MMC_TXFRAMELO_GCNT_REG,
+					    SXGBE_MMC_TXFRAMEHI_GCNT_REG);
+	stats->tx_errors = count - stats->tx_errors;
+	stats->tx_packets = count;
+	stats->tx_fifo_errors = sxgbe_get_stat64(ioaddr, SXGBE_MMC_TXUFLWLO_GBCNT_REG,
+						 SXGBE_MMC_TXUFLWHI_GBCNT_REG);
+	writel(0, ioaddr + SXGBE_MMC_CTL_REG);
+	spin_unlock(&priv->stats_lock);
+
+	return stats;
+}
+
+/*  sxgbe_set_features - entry point to set offload features of the device.
+ *  @dev : device pointer.
+ *  @features : features which are required to be set.
+ *  Description:
+ *  This function is a driver entry point and called by Linux kernel whenever
+ *  any device features are set or reset by user.
+ *  Return value:
+ *  This function returns 0 after setting or resetting device features.
+ */
+static int sxgbe_set_features(struct net_device *dev,
+			      netdev_features_t features)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+	netdev_features_t changed = dev->features ^ features;
+	u32 ctrl;
+
+	if (changed & NETIF_F_RXCSUM) {
+		ctrl = readl(priv->ioaddr + SXGBE_CORE_RX_CONFIG_REG);
+		if (features & NETIF_F_RXCSUM)
+			ctrl |= SXGBE_RX_CSUMOFFLOAD_ENABLE;
+		else
+			ctrl &= ~SXGBE_RX_CSUMOFFLOAD_ENABLE;
+		writel(ctrl, priv->ioaddr + SXGBE_CORE_RX_CONFIG_REG);
+	}
+
+	return 0;
+}
+
+/*  sxgbe_change_mtu - entry point to change MTU size for the device.
+ *  @dev : device pointer.
+ *  @new_mtu : the new MTU size for the device.
+ *  Description: the Maximum Transfer Unit (MTU) is used by the network layer
+ *  to drive packet transmission. Ethernet has an MTU of 1500 octets
+ *  (ETH_DATA_LEN). This value can be changed with ifconfig.
+ *  Return value:
+ *  0 on success and an appropriate (-)ve integer as defined in errno.h
+ *  file on failure.
+ */
+static int sxgbe_change_mtu(struct net_device *dev, int new_mtu)
+{
+	/* RFC 791, page 25, "Every internet module must be able to forward
+	 * a datagram of 68 octets without further fragmentation."
+	 */
+	if (new_mtu < MIN_MTU || (new_mtu > MAX_MTU)) {
+		netdev_err(dev, "invalid MTU, MTU should be in between %d and %d\n",
+			   MIN_MTU, MAX_MTU);
+		return -EINVAL;
+	}
+
+	/* Return if the buffer sizes will not change */
+	if (dev->mtu == new_mtu)
+		return 0;
+
+	dev->mtu = new_mtu;
+
+	if (!netif_running(dev))
+		return 0;
+
+	/* Recevice ring buffer size is needed to be set based on MTU. If MTU is
+	 * changed then reinitilisation of the receive ring buffers need to be
+	 * done. Hence bring interface down and bring interface back up
+	 */
+	sxgbe_release(dev);
+	return sxgbe_open(dev);
+}
+
+static void sxgbe_set_umac_addr(void __iomem *ioaddr, unsigned char *addr,
+				unsigned int reg_n)
+{
+	unsigned long data;
+
+	data = (addr[5] << 8) | addr[4];
+	/* For MAC Addr registers se have to set the Address Enable (AE)
+	 * bit that has no effect on the High Reg 0 where the bit 31 (MO)
+	 * is RO.
+	 */
+	writel(data | SXGBE_HI_REG_AE, ioaddr + SXGBE_ADDR_HIGH(reg_n));
+	data = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0];
+	writel(data, ioaddr + SXGBE_ADDR_LOW(reg_n));
+}
+
+/**
+ * sxgbe_set_rx_mode - entry point for setting different receive mode of
+ * a device. unicast, multicast addressing
+ * @dev : pointer to the device structure
+ * Description:
+ * This function is a driver entry point which gets called by the kernel
+ * whenever different receive mode like unicast, multicast and promiscuous
+ * must be enabled/disabled.
+ * Return value:
+ * void.
+ */
+static void sxgbe_set_rx_mode(struct net_device *dev)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+	void __iomem *ioaddr = (void __iomem *)priv->ioaddr;
+	unsigned int value = 0;
+	u32 mc_filter[2];
+	struct netdev_hw_addr *ha;
+	int reg = 1;
+
+	netdev_dbg(dev, "%s: # mcasts %d, # unicast %d\n",
+		   __func__, netdev_mc_count(dev), netdev_uc_count(dev));
+
+	if (dev->flags & IFF_PROMISC) {
+		value = SXGBE_FRAME_FILTER_PR;
+	} else if ((netdev_mc_count(dev) > SXGBE_HASH_TABLE_SIZE) ||
+		   (dev->flags & IFF_ALLMULTI)) {
+		value = SXGBE_FRAME_FILTER_PM;	/* pass all multi */
+		writel(0xffffffff, ioaddr + SXGBE_HASH_HIGH);
+		writel(0xffffffff, ioaddr + SXGBE_HASH_LOW);
+	} else if (!netdev_mc_empty(dev)) {
+		/* Hash filter for multicast */
+		value = SXGBE_FRAME_FILTER_HMC;
+
+		memset(mc_filter, 0, sizeof(mc_filter));
+		netdev_for_each_mc_addr(ha, dev) {
+			/* The upper 6 bits of the calculated CRC are used to
+			 * index the contens of the hash table
+			 */
+			int bit_nr = bitrev32(~crc32_le(~0, ha->addr, 6)) >> 26;
+			/* The most significant bit determines the register to
+			 * use (H/L) while the other 5 bits determine the bit
+			 * within the register.
+			 */
+			mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+		}
+		writel(mc_filter[0], ioaddr + SXGBE_HASH_LOW);
+		writel(mc_filter[1], ioaddr + SXGBE_HASH_HIGH);
+	}
+
+	/* Handle multiple unicast addresses (perfect filtering) */
+	if (netdev_uc_count(dev) > SXGBE_MAX_PERFECT_ADDRESSES)
+		/* Switch to promiscuous mode if more than 16 addrs
+		 * are required
+		 */
+		value |= SXGBE_FRAME_FILTER_PR;
+	else {
+		netdev_for_each_uc_addr(ha, dev) {
+			sxgbe_set_umac_addr(ioaddr, ha->addr, reg);
+			reg++;
+		}
+	}
+#ifdef FRAME_FILTER_DEBUG
+	/* Enable Receive all mode (to debug filtering_fail errors) */
+	value |= SXGBE_FRAME_FILTER_RA;
+#endif
+	writel(value, ioaddr + SXGBE_FRAME_FILTER);
+
+	netdev_dbg(dev, "Filter: 0x%08x\n\tHash: HI 0x%08x, LO 0x%08x\n",
+		   readl(ioaddr + SXGBE_FRAME_FILTER),
+		   readl(ioaddr + SXGBE_HASH_HIGH),
+		   readl(ioaddr + SXGBE_HASH_LOW));
+}
+
+/**
+ * sxgbe_config - entry point for changing configuration mode passed on by
+ * ifconfig
+ * @dev : pointer to the device structure
+ * @map : pointer to the device mapping structure
+ * Description:
+ * This function is a driver entry point which gets called by the kernel
+ * whenever some device configuration is changed.
+ * Return value:
+ * This function returns 0 if success and appropriate error otherwise.
+ */
+static int sxgbe_config(struct net_device *dev, struct ifmap *map)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+
+	/* Can't act on a running interface */
+	if (dev->flags & IFF_UP)
+		return -EBUSY;
+
+	/* Don't allow changing the I/O address */
+	if (map->base_addr != (unsigned long)priv->ioaddr) {
+		netdev_warn(dev, "can't change I/O address\n");
+		return -EOPNOTSUPP;
+	}
+
+	/* Don't allow changing the IRQ */
+	if (map->irq != priv->irq) {
+		netdev_warn(dev, "not change IRQ number %d\n", priv->irq);
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/**
+ * sxgbe_poll_controller - entry point for polling receive by device
+ * @dev : pointer to the device structure
+ * Description:
+ * This function is used by NETCONSOLE and other diagnostic tools
+ * to allow network I/O with interrupts disabled.
+ * Return value:
+ * Void.
+ */
+static void sxgbe_poll_controller(struct net_device *dev)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+
+	disable_irq(priv->irq);
+	sxgbe_rx_interrupt(priv->irq, dev);
+	enable_irq(priv->irq);
+}
+#endif
+
+/*  sxgbe_ioctl - Entry point for the Ioctl
+ *  @dev: Device pointer.
+ *  @rq: An IOCTL specefic structure, that can contain a pointer to
+ *  a proprietary structure used to pass information to the driver.
+ *  @cmd: IOCTL command
+ *  Description:
+ *  Currently it supports the phy_mii_ioctl(...) and HW time stamping.
+ */
+static int sxgbe_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+	int ret = -EOPNOTSUPP;
+
+	if (!netif_running(dev))
+		return -EINVAL;
+
+	switch (cmd) {
+	case SIOCGMIIPHY:
+	case SIOCGMIIREG:
+	case SIOCSMIIREG:
+		if (!priv->phydev)
+			return -EINVAL;
+		ret = phy_mii_ioctl(priv->phydev, rq, cmd);
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+static const struct net_device_ops sxgbe_netdev_ops = {
+	.ndo_open = sxgbe_open,
+	.ndo_start_xmit = sxgbe_xmit,
+	.ndo_stop = sxgbe_release,
+	.ndo_get_stats64 = sxgbe_get_stats64,
+	.ndo_change_mtu = sxgbe_change_mtu,
+	.ndo_set_features = sxgbe_set_features,
+	.ndo_set_rx_mode = sxgbe_set_rx_mode,
+	.ndo_tx_timeout = sxgbe_tx_timeout,
+	.ndo_do_ioctl = sxgbe_ioctl,
+	.ndo_set_config = sxgbe_config,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller = sxgbe_poll_controller,
+#endif
+	.ndo_set_mac_address = eth_mac_addr,
+};
+
+/* Get the hardware ops */
+void sxgbe_get_ops(struct sxgbe_ops * const ops_ptr)
+{
+	ops_ptr->mac = sxgbe_get_core_ops();
+	ops_ptr->desc = sxgbe_get_desc_ops();
+	ops_ptr->dma = sxgbe_get_dma_ops();
+	ops_ptr->mtl = sxgbe_get_mtl_ops();
+
+	/* set the MDIO communication Address/Data regisers */
+	ops_ptr->mii.addr = SXGBE_MDIO_SCMD_ADD_REG;
+	ops_ptr->mii.data = SXGBE_MDIO_SCMD_DATA_REG;
+
+	/* Assigning the default link settings
+	 * no SXGBE defined default values to be set in registers,
+	 * so assigning as 0 for port and duplex
+	 */
+	ops_ptr->link.port = 0;
+	ops_ptr->link.duplex = 0;
+	ops_ptr->link.speed = SXGBE_SPEED_10G;
+}
+
+/**
+ *  sxgbe_hw_init - Init the GMAC device
+ *  @priv: driver private structure
+ *  Description: this function checks the HW capability
+ *  (if supported) and sets the driver's features.
+ */
+static int sxgbe_hw_init(struct sxgbe_priv_data * const priv)
+{
+	u32 ctrl_ids;
+
+	/* get the hardware ops */
+	sxgbe_get_ops(priv->hw);
+
+	/* get the controller id */
+	ctrl_ids = priv->hw->mac->get_controller_version(priv->ioaddr);
+	priv->hw->ctrl_uid = (ctrl_ids & 0x00ff0000) >> 16;
+	priv->hw->ctrl_id = (ctrl_ids & 0x000000ff);
+	pr_info("user ID: 0x%x, Controller ID: 0x%x\n",
+		priv->hw->ctrl_uid, priv->hw->ctrl_id);
+
+	/* get the H/W features */
+	if (!sxgbe_get_hw_features(priv))
+		pr_info("Hardware features not found\n");
+
+	if (priv->hw_cap.tx_csum_offload)
+		pr_info("TX Checksum offload supported\n");
+
+	if (priv->hw_cap.rx_csum_offload)
+		pr_info("RX Checksum offload supported\n");
+
+	return 0;
+}
+
+/**
+ * sxgbe_dvr_probe
+ * @device: device pointer
+ * @plat_dat: platform data pointer
+ * @addr: iobase memory address
+ * Description: this is the main probe function used to
+ * call the alloc_etherdev, allocate the priv structure.
+ */
+struct sxgbe_priv_data *sxgbe_dvr_probe(struct device *device,
+					struct sxgbe_plat_data *plat_dat,
+					void __iomem *addr)
+{
+	int ret = 0;
+	struct net_device *ndev = NULL;
+	struct sxgbe_priv_data *priv;
+
+	ndev = alloc_etherdev_mqs(sizeof(struct sxgbe_priv_data),
+				  SXGBE_TX_QUEUES, SXGBE_RX_QUEUES);
+	if (!ndev)
+		return NULL;
+
+	SET_NETDEV_DEV(ndev, device);
+
+	priv = netdev_priv(ndev);
+	priv->device = device;
+	priv->dev = ndev;
+
+	ether_setup(ndev);
+
+	sxgbe_set_ethtool_ops(ndev);
+	priv->plat = plat_dat;
+	priv->ioaddr = addr;
+
+	/* Init MAC and get the capabilities */
+	ret = sxgbe_hw_init(priv);
+	if (ret)
+		goto error_free_netdev;
+
+	/* allocate memory resources for Descriptor rings */
+	ret = txring_mem_alloc(priv);
+	if (ret)
+		goto error_free_netdev;
+
+	ret = rxring_mem_alloc(priv);
+	if (ret)
+		goto error_free_netdev;
+
+	ndev->netdev_ops = &sxgbe_netdev_ops;
+
+	ndev->hw_features = NETIF_F_SG | NETIF_F_RXCSUM;
+	ndev->features |= ndev->hw_features | NETIF_F_HIGHDMA;
+	ndev->watchdog_timeo = msecs_to_jiffies(TX_TIMEO);
+
+	/* assign filtering support */
+	ndev->priv_flags |= IFF_UNICAST_FLT;
+
+	priv->msg_enable = netif_msg_init(debug, default_msg_level);
+
+	if (flow_ctrl)
+		priv->flow_ctrl = SXGBE_FLOW_AUTO;	/* RX/TX pause on */
+
+	/* Rx Watchdog is available, enable depend on platform data */
+	if (!priv->plat->riwt_off) {
+		priv->use_riwt = 1;
+		pr_info("Enable RX Mitigation via HW Watchdog Timer\n");
+	}
+
+	netif_napi_add(ndev, &priv->napi, sxgbe_poll, 64);
+
+	spin_lock_init(&priv->stats_lock);
+
+	ret = register_netdev(ndev);
+	if (ret) {
+		pr_err("%s: ERROR %i registering the device\n", __func__, ret);
+		goto error_netdev_register;
+	}
+
+	priv->sxgbe_clk = clk_get(priv->device, SXGBE_RESOURCE_NAME);
+	if (IS_ERR(priv->sxgbe_clk)) {
+		netdev_warn(ndev, "%s: warning: cannot get CSR clock\n",
+			    __func__);
+		goto error_clk_get;
+	}
+
+	/* If a specific clk_csr value is passed from the platform
+	 * this means that the CSR Clock Range selection cannot be
+	 * changed at run-time and it is fixed. Viceversa the driver'll try to
+	 * set the MDC clock dynamically according to the csr actual
+	 * clock input.
+	 */
+	if (!priv->plat->clk_csr)
+		sxgbe_clk_csr_set(priv);
+	else
+		priv->clk_csr = priv->plat->clk_csr;
+
+	/* MDIO bus Registration */
+	ret = sxgbe_mdio_register(ndev);
+	if (ret < 0) {
+		netdev_dbg(ndev, "%s: MDIO bus (id: %d) registration failed\n",
+			   __func__, priv->plat->bus_id);
+		goto error_mdio_register;
+	}
+
+	sxgbe_check_ether_addr(priv);
+
+	return priv;
+
+error_mdio_register:
+	clk_put(priv->sxgbe_clk);
+error_clk_get:
+	unregister_netdev(ndev);
+error_netdev_register:
+	netif_napi_del(&priv->napi);
+error_free_netdev:
+	free_netdev(ndev);
+
+	return NULL;
+}
+
+/**
+ * sxgbe_dvr_remove
+ * @ndev: net device pointer
+ * Description: this function resets the TX/RX processes, disables the MAC RX/TX
+ * changes the link status, releases the DMA descriptor rings.
+ */
+int sxgbe_dvr_remove(struct net_device *ndev)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(ndev);
+
+	netdev_info(ndev, "%s: removing driver\n", __func__);
+
+	priv->hw->dma->stop_rx(priv->ioaddr, SXGBE_RX_QUEUES);
+	priv->hw->dma->stop_tx(priv->ioaddr, SXGBE_TX_QUEUES);
+
+	priv->hw->mac->enable_tx(priv->ioaddr, false);
+	priv->hw->mac->enable_rx(priv->ioaddr, false);
+
+	netif_napi_del(&priv->napi);
+
+	sxgbe_mdio_unregister(ndev);
+
+	netif_carrier_off(ndev);
+
+	unregister_netdev(ndev);
+
+	free_netdev(ndev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+int sxgbe_suspend(struct net_device *ndev)
+{
+	return 0;
+}
+
+int sxgbe_resume(struct net_device *ndev)
+{
+	return 0;
+}
+
+int sxgbe_freeze(struct net_device *ndev)
+{
+	return -ENOSYS;
+}
+
+int sxgbe_restore(struct net_device *ndev)
+{
+	return -ENOSYS;
+}
+#endif /* CONFIG_PM */
+
+/* Driver is configured as Platform driver */
+static int __init sxgbe_init(void)
+{
+	int ret;
+
+	ret = sxgbe_register_platform();
+	if (ret)
+		goto err;
+	return 0;
+err:
+	pr_err("driver registration failed\n");
+	return ret;
+}
+
+static void __exit sxgbe_exit(void)
+{
+	sxgbe_unregister_platform();
+}
+
+module_init(sxgbe_init);
+module_exit(sxgbe_exit);
+
+#ifndef MODULE
+static int __init sxgbe_cmdline_opt(char *str)
+{
+	return 0;
+}
+
+__setup("sxgbeeth=", sxgbe_cmdline_opt);
+#endif /* MODULE */
+
+
+
+MODULE_DESCRIPTION("SAMSUNG 10G/2.5G/1G Ethernet PLATFORM driver");
+
+MODULE_PARM_DESC(debug, "Message Level (-1: default, 0: no output, 16: all)");
+
+MODULE_AUTHOR("Siva Reddy Kallam <siva.kallam@samsung.com>");
+MODULE_AUTHOR("ByungHo An <bh74.an@samsung.com>");
+MODULE_AUTHOR("Girish K S <ks.giri@samsung.com>");
+MODULE_AUTHOR("Vipul Pandya <vipul.pandya@samsung.com>");
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c
new file mode 100644
index 0000000..742a99b
--- /dev/null
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c
@@ -0,0 +1,274 @@ 
+/* 10G controller driver for Samsung SoCs
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Siva Reddy Kallam <siva.kallam@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/io.h>
+#include <linux/mii.h>
+#include <linux/netdevice.h>
+#include <linux/platform_device.h>
+#include <linux/phy.h>
+#include <linux/slab.h>
+#include <linux/sxgbe_platform.h>
+
+#include "sxgbe_common.h"
+#include "sxgbe_reg.h"
+
+#define SXGBE_SMA_WRITE_CMD	0x01 /* write command */
+#define SXGBE_SMA_PREAD_CMD	0x02 /* post read  increament address */
+#define SXGBE_SMA_READ_CMD	0x03 /* read command */
+#define SXGBE_SMA_SKIP_ADDRFRM	0x00040000 /* skip the address frame */
+#define SXGBE_MII_BUSY		0x00800000 /* mii busy */
+
+static int sxgbe_mdio_busy_wait(void __iomem *ioaddr, unsigned int mii_data)
+{
+	unsigned long cur_time;
+	unsigned long fin_time = jiffies + 3 * HZ; /* 30 ms */
+
+	do {
+		cur_time = jiffies;
+		if (readl(ioaddr + mii_data) & SXGBE_MII_BUSY)
+			cpu_relax();
+		else
+			return 0;
+	} while (!time_after_eq(cur_time, fin_time));
+
+	return -EBUSY;
+}
+
+/**
+ * sxgbe_mdio_read
+ * @bus: points to the mii_bus structure
+ * @phyaddr: address of phy port
+ * @phyreg: address of register with in phy register
+ * Description: this function used for C45 and C22 MDIO Read
+ */
+static int sxgbe_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
+{
+	struct net_device *ndev = bus->priv;
+	struct sxgbe_priv_data *priv = netdev_priv(ndev);
+	u32 devaddr, reg_val;
+	u32 mii_addr = priv->hw->mii.addr;
+	u32 mii_data = priv->hw->mii.data;
+
+	/* check for busy wait */
+	if (sxgbe_mdio_busy_wait(priv->ioaddr, mii_data))
+		return -EBUSY;
+
+	if (phyreg & MII_ADDR_C45) {
+		devaddr = (phyreg >> 16) & 0x1F;
+		/* set mdio address register */
+		reg_val = (phyaddr << 16) | (devaddr << 21) | (phyreg & 0xFFFF);
+		writel(reg_val, priv->ioaddr + mii_addr);
+
+		/* set mdio control/data register */
+		reg_val = ((SXGBE_SMA_READ_CMD << 16) | SXGBE_SMA_SKIP_ADDRFRM |
+			   ((priv->clk_csr & 0x7) << 19) | SXGBE_MII_BUSY);
+		writel(reg_val, priv->ioaddr + mii_data);
+	} else {
+		/* configure the port for C22
+		 * ports 0-3 only supports C22
+		 */
+		if (phyaddr >= 4)
+			return -ENODEV;
+		writel((1 << phyaddr),
+		       priv->ioaddr + SXGBE_MDIO_CLAUSE22_PORT_REG);
+		/* set mdio address register */
+		reg_val = (phyaddr << 16) | (phyreg & 0x1F);
+		writel(reg_val, priv->ioaddr + mii_addr);
+
+		/* set mdio control/data register */
+		reg_val = ((SXGBE_SMA_READ_CMD << 16) | SXGBE_SMA_SKIP_ADDRFRM |
+			   ((priv->clk_csr & 0x7) << 19) | SXGBE_MII_BUSY);
+		writel(reg_val, priv->ioaddr + mii_data);
+	}
+
+	/* wait till operation succeds */
+	if (sxgbe_mdio_busy_wait(priv->ioaddr, mii_data))
+		return -EBUSY;
+
+	/* read and return the data from mmi Data register */
+	reg_val = readl(priv->ioaddr + mii_data) & 0xFFFF;
+	return reg_val;
+}
+/**
+ * sxgbe_mdio_write
+ * @bus: points to the mii_bus structure
+ * @phyaddr: address of phy port
+ * @phyreg: address of phy registers
+ * @phydata: data to be written into phy register
+ * Description: this function is used for C45 and C22 MDIO write
+ */
+static int sxgbe_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
+			    u16 phydata)
+{
+	struct net_device *ndev = bus->priv;
+	struct sxgbe_priv_data *priv = netdev_priv(ndev);
+	u32 devaddr, reg_val;
+	u32 mii_addr = priv->hw->mii.addr;
+	u32 mii_data = priv->hw->mii.data;
+
+	/* check for busy wait */
+	if (sxgbe_mdio_busy_wait(priv->ioaddr, mii_data))
+		return -EBUSY;
+
+	if (phyreg & MII_ADDR_C45) {
+		devaddr = (phyreg >> 16) & 0x1F;
+		/* set mdio address register */
+		reg_val = (phyaddr << 16) | (devaddr << 21) | (phyreg & 0xFFFF);
+		writel(reg_val, priv->ioaddr + mii_addr);
+
+		/* set mdio control/data register */
+		reg_val = ((SXGBE_SMA_WRITE_CMD << 16) |
+			   SXGBE_SMA_SKIP_ADDRFRM |
+			   ((priv->clk_csr & 0x7) << 19) | SXGBE_MII_BUSY);
+		reg_val |= phydata;
+
+		writel(reg_val, priv->ioaddr + mii_data);
+	} else {
+		/* configure the port for C22
+		 * ports 0-3 only supports C22
+		 */
+		if (phyaddr >= 4)
+			return -ENODEV;
+
+		writel((1 << phyaddr),
+		       priv->ioaddr + SXGBE_MDIO_CLAUSE22_PORT_REG);
+
+		/* set mdio address register */
+		reg_val = (phyaddr << 16) | (phyreg & 0x1F);
+		writel(reg_val, priv->ioaddr + mii_addr);
+
+		/* set mdio control/data register */
+		reg_val = ((SXGBE_SMA_WRITE_CMD << 16) |
+			   SXGBE_SMA_SKIP_ADDRFRM |
+			   ((priv->clk_csr & 0x7) << 19) | SXGBE_MII_BUSY);
+		reg_val |= phydata;
+		writel(reg_val, priv->ioaddr + mii_data);
+	}
+
+	/* wait till operation succeds */
+	if (sxgbe_mdio_busy_wait(priv->ioaddr, mii_data))
+		return -EBUSY;
+
+	return 0;
+}
+
+int sxgbe_mdio_register(struct net_device *ndev)
+{
+	int err, phy_addr, act;
+	int *irqlist;
+	u8 phy_found = 0;
+	struct mii_bus *mdio_bus;
+	struct sxgbe_priv_data *priv = netdev_priv(ndev);
+	struct sxgbe_mdio_bus_data *mdio_data = priv->plat->mdio_bus_data;
+
+	/* allocate the new mdio bus */
+	mdio_bus = mdiobus_alloc();
+	if (!mdio_bus) {
+		netdev_err(ndev, "%s: mii bus allocation failed\n", __func__);
+		return -ENOMEM;
+	}
+
+	if (mdio_data->irqs)
+		irqlist = mdio_data->irqs;
+	else
+		irqlist = priv->mii_irq;
+
+	/* assign mii bus fields */
+	mdio_bus->name = "samsxgbe";
+	mdio_bus->read = &sxgbe_mdio_read;
+	mdio_bus->write = &sxgbe_mdio_write;
+	snprintf(mdio_bus->id, MII_BUS_ID_SIZE, "%s-%x",
+		 mdio_bus->name, priv->plat->bus_id);
+	mdio_bus->priv = ndev;
+	mdio_bus->phy_mask = mdio_data->phy_mask;
+	mdio_bus->parent = priv->device;
+
+	/* register with kernel subsystem */
+	err = mdiobus_register(mdio_bus);
+	if (err != 0) {
+		netdev_err(ndev, "mdiobus register failed\n");
+		goto mdiobus_err;
+	}
+
+	for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
+		struct phy_device *phy = mdio_bus->phy_map[phy_addr];
+		if (phy) {
+			char irq_num[4];
+			char *irq_str;
+			/* If an IRQ was provided to be assigned after
+			 * the bus probe, do it here.
+			 */
+			if ((mdio_data->irqs == NULL) &&
+			    (mdio_data->probed_phy_irq > 0)) {
+				irqlist[phy_addr] = mdio_data->probed_phy_irq;
+				phy->irq = mdio_data->probed_phy_irq;
+			}
+
+			/* If we're  going to bind the MAC to this PHY bus,
+			 * and no PHY number was provided to the MAC,
+			 * use the one probed here.
+			 */
+			if (priv->plat->phy_addr == -1)
+				priv->plat->phy_addr = phy_addr;
+
+			act = (priv->plat->phy_addr == phy_addr);
+			switch (phy->irq) {
+			case PHY_POLL:
+				irq_str = "POLL";
+				break;
+			case PHY_IGNORE_INTERRUPT:
+				irq_str = "IGNORE";
+				break;
+			default:
+				sprintf(irq_num, "%d", phy->irq);
+				irq_str = irq_num;
+				break;
+			}
+			netdev_info(ndev, "PHY ID %08x at %d IRQ %s (%s)%s\n",
+				    phy->phy_id, phy_addr, irq_str,
+				    dev_name(&phy->dev), act ? " active" : "");
+			phy_found = 1;
+		}
+	}
+
+	if (!phy_found) {
+		netdev_err(ndev, "PHY not found\n");
+		mdiobus_unregister(mdio_bus);
+		mdiobus_free(mdio_bus);
+		return -ENODEV;
+	}
+
+	priv->mii = mdio_bus;
+
+	return 0;
+
+mdiobus_err:
+	mdiobus_free(mdio_bus);
+	return err;
+}
+
+int sxgbe_mdio_unregister(struct net_device *ndev)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(ndev);
+
+	if (!priv->mii)
+		return 0;
+
+	mdiobus_unregister(priv->mii);
+	priv->mii->priv = NULL;
+	mdiobus_free(priv->mii);
+	priv->mii = NULL;
+
+	return 0;
+}
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_mtl.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_mtl.c
new file mode 100644
index 0000000..d3ec6eb
--- /dev/null
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_mtl.c
@@ -0,0 +1,252 @@ 
+/* 10G controller driver for Samsung SoCs
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Siva Reddy Kallam <siva.kallam@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/export.h>
+#include <linux/jiffies.h>
+
+#include "sxgbe_mtl.h"
+#include "sxgbe_reg.h"
+
+static void sxgbe_mtl_init(void __iomem *ioaddr, unsigned int etsalg,
+			   unsigned int raa)
+{
+	u32 reg_val;
+
+	reg_val = readl(ioaddr + SXGBE_MTL_OP_MODE_REG);
+	reg_val &= ETS_RST;
+
+	/* ETS Algorith */
+	switch (etsalg & SXGBE_MTL_OPMODE_ESTMASK) {
+	case ETS_WRR:
+		reg_val &= ETS_WRR;
+		break;
+	case ETS_WFQ:
+		reg_val |= ETS_WFQ;
+		break;
+	case ETS_DWRR:
+		reg_val |= ETS_DWRR;
+		break;
+	}
+	writel(reg_val, ioaddr + SXGBE_MTL_OP_MODE_REG);
+
+	switch (raa & SXGBE_MTL_OPMODE_RAAMASK) {
+	case RAA_SP:
+		reg_val &= RAA_SP;
+		break;
+	case RAA_WSP:
+		reg_val |= RAA_WSP;
+		break;
+	}
+	writel(reg_val, ioaddr + SXGBE_MTL_OP_MODE_REG);
+}
+
+/* For Dynamic DMA channel mapping for Rx queue */
+static void sxgbe_mtl_dma_dm_rxqueue(void __iomem *ioaddr)
+{
+	writel(RX_QUEUE_DYNAMIC, ioaddr + SXGBE_MTL_RXQ_DMAMAP0_REG);
+	writel(RX_QUEUE_DYNAMIC, ioaddr + SXGBE_MTL_RXQ_DMAMAP1_REG);
+	writel(RX_QUEUE_DYNAMIC, ioaddr + SXGBE_MTL_RXQ_DMAMAP2_REG);
+}
+
+static void sxgbe_mtl_set_txfifosize(void __iomem *ioaddr, int queue_num,
+				     int queue_fifo)
+{
+	u32 fifo_bits, reg_val;
+	/* 0 means 256 bytes */
+	fifo_bits = (queue_fifo / SXGBE_MTL_TX_FIFO_DIV)-1;
+	reg_val = readl(ioaddr + SXGBE_MTL_TXQ_OPMODE_REG(queue_num));
+	reg_val |= (fifo_bits << SXGBE_MTL_FIFO_LSHIFT);
+	writel(reg_val, ioaddr + SXGBE_MTL_TXQ_OPMODE_REG(queue_num));
+}
+
+static void sxgbe_mtl_set_rxfifosize(void __iomem *ioaddr, int queue_num,
+				     int queue_fifo)
+{
+	u32 fifo_bits, reg_val;
+	/* 0 means 256 bytes */
+	fifo_bits = (queue_fifo / SXGBE_MTL_RX_FIFO_DIV)-1;
+	reg_val = readl(ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+	reg_val |= (fifo_bits << SXGBE_MTL_FIFO_LSHIFT);
+	writel(reg_val, ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+}
+
+static void sxgbe_mtl_enable_txqueue(void __iomem *ioaddr, int queue_num)
+{
+	u32 reg_val;
+
+	reg_val = readl(ioaddr + SXGBE_MTL_TXQ_OPMODE_REG(queue_num));
+	reg_val |= SXGBE_MTL_ENABLE_QUEUE;
+	writel(reg_val, ioaddr + SXGBE_MTL_TXQ_OPMODE_REG(queue_num));
+}
+
+static void sxgbe_mtl_disable_txqueue(void __iomem *ioaddr, int queue_num)
+{
+	u32 reg_val;
+
+	reg_val = readl(ioaddr + SXGBE_MTL_TXQ_OPMODE_REG(queue_num));
+	reg_val &= ~SXGBE_MTL_ENABLE_QUEUE;
+	writel(reg_val, ioaddr + SXGBE_MTL_TXQ_OPMODE_REG(queue_num));
+}
+
+static void sxgbe_mtl_fc_active(void __iomem *ioaddr, int queue_num,
+				int threshold)
+{
+	u32 reg_val;
+
+	reg_val = readl(ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+	reg_val &= ~(SXGBE_MTL_FCMASK << RX_FC_ACTIVE);
+	reg_val |= (threshold << RX_FC_ACTIVE);
+
+	writel(reg_val, ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+}
+
+static void sxgbe_mtl_fc_enable(void __iomem *ioaddr, int queue_num)
+{
+	u32 reg_val;
+
+	reg_val = readl(ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+	reg_val |= SXGBE_MTL_ENABLE_FC;
+	writel(reg_val, ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+}
+
+static void sxgbe_mtl_fc_deactive(void __iomem *ioaddr, int queue_num,
+				  int threshold)
+{
+	u32 reg_val;
+
+	reg_val = readl(ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+	reg_val &= ~(SXGBE_MTL_FCMASK << RX_FC_DEACTIVE);
+	reg_val |= (threshold << RX_FC_DEACTIVE);
+
+	writel(reg_val, ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+}
+
+static void sxgbe_mtl_fep_enable(void __iomem *ioaddr, int queue_num)
+{
+	u32 reg_val;
+
+	reg_val = readl(ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+	reg_val |= SXGBE_MTL_RXQ_OP_FEP;
+
+	writel(reg_val, ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+}
+
+static void sxgbe_mtl_fep_disable(void __iomem *ioaddr, int queue_num)
+{
+	u32 reg_val;
+
+	reg_val = readl(ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+	reg_val &= ~(SXGBE_MTL_RXQ_OP_FEP);
+
+	writel(reg_val, ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+}
+
+static void sxgbe_mtl_fup_enable(void __iomem *ioaddr, int queue_num)
+{
+	u32 reg_val;
+
+	reg_val = readl(ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+	reg_val |= SXGBE_MTL_RXQ_OP_FUP;
+
+	writel(reg_val, ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+}
+
+static void sxgbe_mtl_fup_disable(void __iomem *ioaddr, int queue_num)
+{
+	u32 reg_val;
+
+	reg_val = readl(ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+	reg_val &= ~(SXGBE_MTL_RXQ_OP_FUP);
+
+	writel(reg_val, ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+}
+
+
+static void sxgbe_set_tx_mtl_mode(void __iomem *ioaddr, int queue_num,
+				  int tx_mode)
+{
+	u32 reg_val;
+
+	reg_val = readl(ioaddr + SXGBE_MTL_TXQ_OPMODE_REG(queue_num));
+	/* TX specific MTL mode settings */
+	if (tx_mode == SXGBE_MTL_SFMODE) {
+		reg_val |= SXGBE_MTL_SFMODE;
+	} else {
+		/* set the TTC values */
+		if (tx_mode <= 64)
+			reg_val |= MTL_CONTROL_TTC_64;
+		else if (tx_mode <= 96)
+			reg_val |= MTL_CONTROL_TTC_96;
+		else if (tx_mode <= 128)
+			reg_val |= MTL_CONTROL_TTC_128;
+		else if (tx_mode <= 192)
+			reg_val |= MTL_CONTROL_TTC_192;
+		else if (tx_mode <= 256)
+			reg_val |= MTL_CONTROL_TTC_256;
+		else if (tx_mode <= 384)
+			reg_val |= MTL_CONTROL_TTC_384;
+		else
+			reg_val |= MTL_CONTROL_TTC_512;
+	}
+
+	/* write into TXQ operation register */
+	writel(reg_val, ioaddr + SXGBE_MTL_TXQ_OPMODE_REG(queue_num));
+}
+
+static void sxgbe_set_rx_mtl_mode(void __iomem *ioaddr, int queue_num,
+				  int rx_mode)
+{
+	u32 reg_val;
+
+	reg_val = readl(ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+	/* RX specific MTL mode settings */
+	if (rx_mode == SXGBE_RX_MTL_SFMODE) {
+		reg_val |= SXGBE_RX_MTL_SFMODE;
+	} else {
+		if (rx_mode <= 64)
+			reg_val |= MTL_CONTROL_RTC_64;
+		else if (rx_mode <= 96)
+			reg_val |= MTL_CONTROL_RTC_96;
+		else if (rx_mode <= 128)
+			reg_val |= MTL_CONTROL_RTC_128;
+	}
+
+	/* write into RXQ operation register */
+	writel(reg_val, ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+}
+
+static const struct sxgbe_mtl_ops mtl_ops = {
+	.mtl_set_txfifosize = sxgbe_mtl_set_txfifosize,
+	.mtl_set_rxfifosize = sxgbe_mtl_set_rxfifosize,
+	.mtl_enable_txqueue = sxgbe_mtl_enable_txqueue,
+	.mtl_disable_txqueue = sxgbe_mtl_disable_txqueue,
+	.mtl_dynamic_dma_rxqueue = sxgbe_mtl_dma_dm_rxqueue,
+	.set_tx_mtl_mode = sxgbe_set_tx_mtl_mode,
+	.set_rx_mtl_mode = sxgbe_set_rx_mtl_mode,
+	.mtl_init = sxgbe_mtl_init,
+	.mtl_fc_active = sxgbe_mtl_fc_active,
+	.mtl_fc_deactive = sxgbe_mtl_fc_deactive,
+	.mtl_fc_enable = sxgbe_mtl_fc_enable,
+	.mtl_fep_enable = sxgbe_mtl_fep_enable,
+	.mtl_fep_disable = sxgbe_mtl_fep_disable,
+	.mtl_fup_enable = sxgbe_mtl_fup_enable,
+	.mtl_fup_disable = sxgbe_mtl_fup_disable
+};
+
+const struct sxgbe_mtl_ops *sxgbe_get_mtl_ops(void)
+{
+	return &mtl_ops;
+}
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_mtl.h b/drivers/net/ethernet/samsung/sxgbe/sxgbe_mtl.h
new file mode 100644
index 0000000..7e4810c
--- /dev/null
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_mtl.h
@@ -0,0 +1,104 @@ 
+/* 10G controller driver for Samsung SoCs
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Siva Reddy Kallam <siva.kallam@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __SXGBE_MTL_H__
+#define __SXGBE_MTL_H__
+
+#define SXGBE_MTL_OPMODE_ESTMASK	0x3
+#define SXGBE_MTL_OPMODE_RAAMASK	0x1
+#define SXGBE_MTL_FCMASK		0x7
+#define SXGBE_MTL_TX_FIFO_DIV		256
+#define SXGBE_MTL_RX_FIFO_DIV		256
+
+#define SXGBE_MTL_RXQ_OP_FEP		BIT(4)
+#define SXGBE_MTL_RXQ_OP_FUP		BIT(3)
+#define SXGBE_MTL_ENABLE_FC		0x80
+
+#define ETS_WRR				0xFFFFFF9F
+#define ETS_RST				0xFFFFFF9F
+#define ETS_WFQ				0x00000020
+#define ETS_DWRR			0x00000040
+#define RAA_SP				0xFFFFFFFB
+#define RAA_WSP				0x00000004
+
+#define RX_QUEUE_DYNAMIC		0x80808080
+#define RX_FC_ACTIVE			8
+#define RX_FC_DEACTIVE			13
+
+enum ttc_control {
+	MTL_CONTROL_TTC_64 = 0x00000000,
+	MTL_CONTROL_TTC_96 = 0x00000020,
+	MTL_CONTROL_TTC_128 = 0x00000030,
+	MTL_CONTROL_TTC_192 = 0x00000040,
+	MTL_CONTROL_TTC_256 = 0x00000050,
+	MTL_CONTROL_TTC_384 = 0x00000060,
+	MTL_CONTROL_TTC_512 = 0x00000070,
+};
+
+enum rtc_control {
+	MTL_CONTROL_RTC_64 = 0x00000000,
+	MTL_CONTROL_RTC_96 = 0x00000002,
+	MTL_CONTROL_RTC_128 = 0x00000003,
+};
+
+enum flow_control_th {
+	MTL_FC_FULL_1K = 0x00000000,
+	MTL_FC_FULL_2K = 0x00000001,
+	MTL_FC_FULL_4K = 0x00000002,
+	MTL_FC_FULL_5K = 0x00000003,
+	MTL_FC_FULL_6K = 0x00000004,
+	MTL_FC_FULL_8K = 0x00000005,
+	MTL_FC_FULL_16K = 0x00000006,
+	MTL_FC_FULL_24K = 0x00000007,
+};
+
+struct sxgbe_mtl_ops {
+	void (*mtl_init)(void __iomem *ioaddr, unsigned int etsalg,
+			 unsigned int raa);
+
+	void (*mtl_set_txfifosize)(void __iomem *ioaddr, int queue_num,
+				   int mtl_fifo);
+
+	void (*mtl_set_rxfifosize)(void __iomem *ioaddr, int queue_num,
+				   int queue_fifo);
+
+	void (*mtl_enable_txqueue)(void __iomem *ioaddr, int queue_num);
+
+	void (*mtl_disable_txqueue)(void __iomem *ioaddr, int queue_num);
+
+	void (*set_tx_mtl_mode)(void __iomem *ioaddr, int queue_num,
+				int tx_mode);
+
+	void (*set_rx_mtl_mode)(void __iomem *ioaddr, int queue_num,
+				int rx_mode);
+
+	void (*mtl_dynamic_dma_rxqueue)(void __iomem *ioaddr);
+
+	void (*mtl_fc_active)(void __iomem *ioaddr, int queue_num,
+			      int threshold);
+
+	void (*mtl_fc_deactive)(void __iomem *ioaddr, int queue_num,
+				int threshold);
+
+	void (*mtl_fc_enable)(void __iomem *ioaddr, int queue_num);
+
+	void (*mtl_fep_enable)(void __iomem *ioaddr, int queue_num);
+
+	void (*mtl_fep_disable)(void __iomem *ioaddr, int queue_num);
+
+	void (*mtl_fup_enable)(void __iomem *ioaddr, int queue_num);
+
+	void (*mtl_fup_disable)(void __iomem *ioaddr, int queue_num);
+};
+
+const struct sxgbe_mtl_ops *sxgbe_get_mtl_ops(void);
+
+#endif /* __SXGBE_MTL_H__ */
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c
new file mode 100644
index 0000000..7345d37
--- /dev/null
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c
@@ -0,0 +1,260 @@ 
+/* 10G controller driver for Samsung SoCs
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Siva Reddy Kallam <siva.kallam@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/etherdevice.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_net.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/sxgbe_platform.h>
+
+#include "sxgbe_common.h"
+#include "sxgbe_reg.h"
+
+#ifdef CONFIG_OF
+static int sxgbe_probe_config_dt(struct platform_device *pdev,
+				 struct sxgbe_plat_data *plat,
+				 const char **mac)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct sxgbe_dma_cfg *dma_cfg;
+
+	if (!np)
+		return -ENODEV;
+
+	*mac = of_get_mac_address(np);
+	plat->interface = of_get_phy_mode(np);
+
+	plat->bus_id = of_alias_get_id(np, "ethernet");
+	if (plat->bus_id < 0)
+		plat->bus_id = 0;
+
+	of_property_read_u32(np, "samsung,phy-addr", &plat->phy_addr);
+
+	plat->mdio_bus_data = devm_kzalloc(&pdev->dev,
+					   sizeof(struct sxgbe_mdio_bus_data),
+					   GFP_KERNEL);
+
+	plat->force_sf_dma_mode = of_property_read_bool(np,
+							"samsung,force-sf-dma-mode");
+
+	dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*dma_cfg), GFP_KERNEL);
+	if (!dma_cfg)
+		return -ENOMEM;
+
+	plat->dma_cfg = dma_cfg;
+	of_property_read_u32(np, "samsung,pbl", &dma_cfg->pbl);
+	if (of_property_read_u32(np, "samsung,burst-map", &dma_cfg->burst_map) == 0)
+		dma_cfg->fixed_burst = true;
+
+	dma_cfg->adv_addr_mode = of_property_read_bool(np,
+						       "samsung,adv-addr-mode");
+
+	plat->force_thresh_dma_mode = of_property_read_bool(np,
+							    "samsung,force-thresh-dma-mode");
+	if (plat->force_thresh_dma_mode) {
+		plat->force_sf_dma_mode = 0;
+		pr_warn("force-sf-dma-mode is ignored as force-thresh-dma-mode is set\n");
+	}
+
+	return 0;
+}
+#else
+static int sxgbe_probe_config_dt(struct platform_device *pdev,
+				 struct sxgbe_plat_data *plat,
+				 const char **mac)
+{
+	return -ENOSYS;
+}
+#endif /* CONFIG_OF */
+
+/**
+ * sxgbe_platform_probe
+ * @pdev: platform device pointer
+ * Description: platform_device probe function. It allocates
+ * the necessary resources and invokes the main to init
+ * the net device, register the mdio bus etc.
+ */
+static int sxgbe_platform_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	int loop = 0;
+	int index1, index2;
+	struct resource *res;
+	struct device *dev = &pdev->dev;
+	void __iomem *addr = NULL;
+	struct sxgbe_priv_data *priv = NULL;
+	struct sxgbe_plat_data *plat_dat = NULL;
+	const char *mac = NULL;
+	int total_dma_channels = SXGBE_TX_QUEUES + SXGBE_RX_QUEUES;
+
+	/* Get memory resource */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	addr = devm_ioremap_resource(dev, res);
+	if (IS_ERR(addr))
+		return PTR_ERR(addr);
+
+	if (pdev->dev.of_node) {
+		plat_dat = devm_kzalloc(&pdev->dev,
+					sizeof(struct sxgbe_plat_data),
+					GFP_KERNEL);
+		if (!plat_dat)
+			return  -ENOMEM;
+
+		ret = sxgbe_probe_config_dt(pdev, plat_dat, &mac);
+		if (ret) {
+			pr_err("%s: main dt probe failed\n", __func__);
+			return ret;
+		}
+	}
+
+	priv = sxgbe_dvr_probe(&(pdev->dev), plat_dat, addr);
+	if (!priv) {
+		pr_err("%s: main driver probe failed\n", __func__);
+		return -ENODEV;
+	}
+
+	/* Get MAC address if available (DT) */
+	if (mac)
+		ether_addr_copy(priv->dev->dev_addr, mac);
+
+	/* Get the SXGBE common INT information */
+	priv->irq  = irq_of_parse_and_map(dev->of_node, loop++);
+	if (priv->irq <= 0) {
+		dev_err(dev, "sxgbe common irq parsing failed\n");
+		return -EINVAL;
+	}
+
+	/* Get the TX/RX IRQ numbers */
+	for (index1 = 0, index2 = 0 ; loop < total_dma_channels; loop++) {
+		if (loop < SXGBE_TX_QUEUES) {
+			(priv->txq[index1])->irq_no  =
+				irq_of_parse_and_map(dev->of_node, loop);
+			if ((priv->txq[index1++])->irq_no <= 0) {
+				dev_err(dev, "sxgbe tx irq parsing failed\n");
+				return -EINVAL;
+			}
+		} else {
+			(priv->rxq[index2])->irq_no  =
+				irq_of_parse_and_map(dev->of_node, loop);
+			if ((priv->rxq[index2++])->irq_no <= 0) {
+				dev_err(dev, "sxgbe rx irq parsing failed\n");
+				return -EINVAL;
+			}
+		}
+	}
+
+	platform_set_drvdata(pdev, priv->dev);
+
+	pr_debug("platform driver registration completed\n");
+
+	return 0;
+}
+
+/**
+ * sxgbe_platform_remove
+ * @pdev: platform device pointer
+ * Description: this function calls the main to free the net resources
+ * and calls the platforms hook and release the resources (e.g. mem).
+ */
+static int sxgbe_platform_remove(struct platform_device *pdev)
+{
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	int ret = sxgbe_dvr_remove(ndev);
+
+	return ret;
+}
+
+#ifdef CONFIG_PM
+static int sxgbe_platform_suspend(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+
+	return sxgbe_suspend(ndev);
+}
+
+static int sxgbe_platform_resume(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+
+	return sxgbe_resume(ndev);
+}
+
+int sxgbe_platform_freeze(struct device *dev)
+{
+	int ret;
+	struct net_device *ndev = dev_get_drvdata(dev);
+
+	ret = sxgbe_freeze(ndev);
+
+	return ret;
+}
+
+int sxgbe_platform_restore(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+
+	return sxgbe_restore(ndev);
+}
+
+static const struct dev_pm_ops sxgbe_platform_pm_ops = {
+	.suspend = sxgbe_platform_suspend,
+	.resume = sxgbe_platform_resume,
+	.freeze = sxgbe_platform_freeze,
+	.thaw = sxgbe_platform_restore,
+	.restore = sxgbe_platform_restore,
+};
+#else
+static const struct dev_pm_ops sxgbe_platform_pm_ops;
+#endif /* CONFIG_PM */
+
+static const struct of_device_id sxgbe_dt_ids[] = {
+	{ .compatible = "samsung,sxgbe-v2.0a"},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sxgbe_dt_ids);
+
+struct platform_driver sxgbe_platform_driver = {
+	.probe = sxgbe_platform_probe,
+	.remove = sxgbe_platform_remove,
+	.driver = {
+		.name = SXGBE_RESOURCE_NAME,
+		.owner = THIS_MODULE,
+		.pm = &sxgbe_platform_pm_ops,
+		.of_match_table = of_match_ptr(sxgbe_dt_ids),
+	},
+};
+
+int sxgbe_register_platform(void)
+{
+	int err;
+
+	err = platform_driver_register(&sxgbe_platform_driver);
+	if (err)
+		pr_err("failed to register the platform driver\n");
+
+	return err;
+}
+
+void sxgbe_unregister_platform(void)
+{
+	platform_driver_unregister(&sxgbe_platform_driver);
+}
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h b/drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h
new file mode 100644
index 0000000..d1cd9ac
--- /dev/null
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h
@@ -0,0 +1,477 @@ 
+/* 10G controller driver for Samsung SoCs
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Siva Reddy Kallam <siva.kallam@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __SXGBE_REGMAP_H__
+#define __SXGBE_REGMAP_H__
+
+/* SXGBE MAC Registers */
+#define SXGBE_CORE_TX_CONFIG_REG	0x0000
+#define SXGBE_CORE_RX_CONFIG_REG	0x0004
+#define SXGBE_CORE_PKT_FILTER_REG	0x0008
+#define SXGBE_CORE_WATCHDOG_TIMEOUT_REG 0x000C
+#define SXGBE_CORE_HASH_TABLE_REG0	0x0010
+#define SXGBE_CORE_HASH_TABLE_REG1	0x0014
+#define SXGBE_CORE_HASH_TABLE_REG2	0x0018
+#define SXGBE_CORE_HASH_TABLE_REG3	0x001C
+#define SXGBE_CORE_HASH_TABLE_REG4	0x0020
+#define SXGBE_CORE_HASH_TABLE_REG5	0x0024
+#define SXGBE_CORE_HASH_TABLE_REG6	0x0028
+#define SXGBE_CORE_HASH_TABLE_REG7	0x002C
+/* VLAN Specific Registers */
+#define SXGBE_CORE_VLAN_TAG_REG		0x0050
+#define SXGBE_CORE_VLAN_HASHTAB_REG	0x0058
+#define SXGBE_CORE_VLAN_INSCTL_REG	0x0060
+#define SXGBE_CORE_VLAN_INNERCTL_REG	0x0064
+#define SXGBE_CORE_RX_ETHTYPE_MATCH_REG 0x006C
+
+/* Flow Contol Registers */
+#define SXGBE_CORE_TX_Q0_FLOWCTL_REG	0x0070
+#define SXGBE_CORE_TX_Q1_FLOWCTL_REG	0x0074
+#define SXGBE_CORE_TX_Q2_FLOWCTL_REG	0x0078
+#define SXGBE_CORE_TX_Q3_FLOWCTL_REG	0x007C
+#define SXGBE_CORE_TX_Q4_FLOWCTL_REG	0x0080
+#define SXGBE_CORE_TX_Q5_FLOWCTL_REG	0x0084
+#define SXGBE_CORE_TX_Q6_FLOWCTL_REG	0x0088
+#define SXGBE_CORE_TX_Q7_FLOWCTL_REG	0x008C
+#define SXGBE_CORE_RX_FLOWCTL_REG	0x0090
+#define SXGBE_CORE_RX_CTL0_REG		0x00A0
+#define SXGBE_CORE_RX_CTL1_REG		0x00A4
+#define SXGBE_CORE_RX_CTL2_REG		0x00A8
+#define SXGBE_CORE_RX_CTL3_REG		0x00AC
+
+/* Interrupt Registers */
+#define SXGBE_CORE_INT_STATUS_REG	0x00B0
+#define SXGBE_CORE_INT_ENABLE_REG	0x00B4
+#define SXGBE_CORE_RXTX_ERR_STATUS_REG	0x00B8
+#define SXGBE_CORE_PMT_CTL_STATUS_REG	0x00C0
+#define SXGBE_CORE_RWK_PKT_FILTER_REG	0x00C4
+#define SXGBE_CORE_VERSION_REG		0x0110
+#define SXGBE_CORE_DEBUG_REG		0x0114
+#define SXGBE_CORE_HW_FEA_REG(index)	(0x011C + index * 4)
+
+/* SMA(MDIO) module registers */
+#define SXGBE_MDIO_SCMD_ADD_REG		0x0200
+#define SXGBE_MDIO_SCMD_DATA_REG	0x0204
+#define SXGBE_MDIO_CCMD_WADD_REG	0x0208
+#define SXGBE_MDIO_CCMD_WDATA_REG	0x020C
+#define SXGBE_MDIO_CSCAN_PORT_REG	0x0210
+#define SXGBE_MDIO_INT_STATUS_REG	0x0214
+#define SXGBE_MDIO_INT_ENABLE_REG	0x0218
+#define SXGBE_MDIO_PORT_CONDCON_REG	0x021C
+#define SXGBE_MDIO_CLAUSE22_PORT_REG	0x0220
+
+/* port specific, addr = 0-3 */
+#define SXGBE_MDIO_DEV_BASE_REG		0x0230
+#define SXGBE_MDIO_PORT_DEV_REG(addr)			\
+	(SXGBE_MDIO_DEV_BASE_REG + (0x10 * addr) + 0x0)
+#define SXGBE_MDIO_PORT_LSTATUS_REG(addr)		\
+	(SXGBE_MDIO_DEV_BASE_REG + (0x10 * addr) + 0x4)
+#define SXGBE_MDIO_PORT_ALIVE_REG(addr)			\
+	(SXGBE_MDIO_DEV_BASE_REG + (0x10 * addr) + 0x8)
+
+#define SXGBE_CORE_GPIO_CTL_REG		0x0278
+#define SXGBE_CORE_GPIO_STATUS_REG	0x027C
+
+/* Address registers for filtering */
+#define SXGBE_CORE_ADD_BASE_REG		0x0300
+
+/* addr = 0-31 */
+#define SXGBE_CORE_ADD_HIGHOFFSET(addr)			\
+	(SXGBE_CORE_ADD_BASE_REG + (0x8 * addr) + 0x0)
+#define SXGBE_CORE_ADD_LOWOFFSET(addr)			\
+	(SXGBE_CORE_ADD_BASE_REG + (0x8 * addr) + 0x4)
+
+/* SXGBE MMC registers */
+#define SXGBE_MMC_CTL_REG		0x0800
+#define SXGBE_MMC_RXINT_STATUS_REG	0x0804
+#define SXGBE_MMC_TXINT_STATUS_REG	0x0808
+#define SXGBE_MMC_RXINT_ENABLE_REG	0x080C
+#define SXGBE_MMC_TXINT_ENABLE_REG	0x0810
+
+/* TX specific counters */
+#define SXGBE_MMC_TXOCTETHI_GBCNT_REG	0x0814
+#define SXGBE_MMC_TXOCTETLO_GBCNT_REG	0x0818
+#define SXGBE_MMC_TXFRAMELO_GBCNT_REG	0x081C
+#define SXGBE_MMC_TXFRAMEHI_GBCNT_REG	0x0820
+#define SXGBE_MMC_TXBROADLO_GCNT_REG	0x0824
+#define SXGBE_MMC_TXBROADHI_GCNT_REG	0x0828
+#define SXGBE_MMC_TXMULTILO_GCNT_REG	0x082C
+#define SXGBE_MMC_TXMULTIHI_GCNT_REG	0x0830
+#define SXGBE_MMC_TX64LO_GBCNT_REG	0x0834
+#define SXGBE_MMC_TX64HI_GBCNT_REG	0x0838
+#define SXGBE_MMC_TX65TO127LO_GBCNT_REG		0x083C
+#define SXGBE_MMC_TX65TO127HI_GBCNT_REG		0x0840
+#define SXGBE_MMC_TX128TO255LO_GBCNT_REG	0x0844
+#define SXGBE_MMC_TX128TO255HI_GBCNT_REG	0x0848
+#define SXGBE_MMC_TX256TO511LO_GBCNT_REG	0x084C
+#define SXGBE_MMC_TX256TO511HI_GBCNT_REG	0x0850
+#define SXGBE_MMC_TX512TO1023LO_GBCNT_REG	0x0854
+#define SXGBE_MMC_TX512TO1023HI_GBCNT_REG	0x0858
+#define SXGBE_MMC_TX1023TOMAXLO_GBCNT_REG	0x085C
+#define SXGBE_MMC_TX1023TOMAXHI_GBCNT_REG	0x0860
+#define SXGBE_MMC_TXUNICASTLO_GBCNT_REG		0x0864
+#define SXGBE_MMC_TXUNICASTHI_GBCNT_REG		0x0868
+#define SXGBE_MMC_TXMULTILO_GBCNT_REG		0x086C
+#define SXGBE_MMC_TXMULTIHI_GBCNT_REG		0x0870
+#define SXGBE_MMC_TXBROADLO_GBCNT_REG		0x0874
+#define SXGBE_MMC_TXBROADHI_GBCNT_REG		0x0878
+#define SXGBE_MMC_TXUFLWLO_GBCNT_REG		0x087C
+#define SXGBE_MMC_TXUFLWHI_GBCNT_REG		0x0880
+#define SXGBE_MMC_TXOCTETLO_GCNT_REG	0x0884
+#define SXGBE_MMC_TXOCTETHI_GCNT_REG	0x0888
+#define SXGBE_MMC_TXFRAMELO_GCNT_REG	0x088C
+#define SXGBE_MMC_TXFRAMEHI_GCNT_REG	0x0890
+#define SXGBE_MMC_TXPAUSELO_CNT_REG	0x0894
+#define SXGBE_MMC_TXPAUSEHI_CNT_REG	0x0898
+#define SXGBE_MMC_TXVLANLO_GCNT_REG	0x089C
+#define SXGBE_MMC_TXVLANHI_GCNT_REG	0x08A0
+
+/* RX specific counters */
+#define SXGBE_MMC_RXFRAMELO_GBCNT_REG	0x0900
+#define SXGBE_MMC_RXFRAMEHI_GBCNT_REG	0x0904
+#define SXGBE_MMC_RXOCTETLO_GBCNT_REG	0x0908
+#define SXGBE_MMC_RXOCTETHI_GBCNT_REG	0x090C
+#define SXGBE_MMC_RXOCTETLO_GCNT_REG	0x0910
+#define SXGBE_MMC_RXOCTETHI_GCNT_REG	0x0914
+#define SXGBE_MMC_RXBROADLO_GCNT_REG	0x0918
+#define SXGBE_MMC_RXBROADHI_GCNT_REG	0x091C
+#define SXGBE_MMC_RXMULTILO_GCNT_REG	0x0920
+#define SXGBE_MMC_RXMULTIHI_GCNT_REG	0x0924
+#define SXGBE_MMC_RXCRCERRLO_REG	0x0928
+#define SXGBE_MMC_RXCRCERRHI_REG	0x092C
+#define SXGBE_MMC_RXSHORT64BFRAME_ERR_REG	0x0930
+#define SXGBE_MMC_RXJABBERERR_REG		0x0934
+#define SXGBE_MMC_RXSHORT64BFRAME_COR_REG	0x0938
+#define SXGBE_MMC_RXOVERMAXFRAME_COR_REG	0x093C
+#define SXGBE_MMC_RX64LO_GBCNT_REG		0x0940
+#define SXGBE_MMC_RX64HI_GBCNT_REG		0x0944
+#define SXGBE_MMC_RX65TO127LO_GBCNT_REG		0x0948
+#define SXGBE_MMC_RX65TO127HI_GBCNT_REG		0x094C
+#define SXGBE_MMC_RX128TO255LO_GBCNT_REG	0x0950
+#define SXGBE_MMC_RX128TO255HI_GBCNT_REG	0x0954
+#define SXGBE_MMC_RX256TO511LO_GBCNT_REG	0x0958
+#define SXGBE_MMC_RX256TO511HI_GBCNT_REG	0x095C
+#define SXGBE_MMC_RX512TO1023LO_GBCNT_REG	0x0960
+#define SXGBE_MMC_RX512TO1023HI_GBCNT_REG	0x0964
+#define SXGBE_MMC_RX1023TOMAXLO_GBCNT_REG	0x0968
+#define SXGBE_MMC_RX1023TOMAXHI_GBCNT_REG	0x096C
+#define SXGBE_MMC_RXUNICASTLO_GCNT_REG		0x0970
+#define SXGBE_MMC_RXUNICASTHI_GCNT_REG		0x0974
+#define SXGBE_MMC_RXLENERRLO_REG		0x0978
+#define SXGBE_MMC_RXLENERRHI_REG		0x097C
+#define SXGBE_MMC_RXOUTOFRANGETYPELO_REG	0x0980
+#define SXGBE_MMC_RXOUTOFRANGETYPEHI_REG	0x0984
+#define SXGBE_MMC_RXPAUSELO_CNT_REG		0x0988
+#define SXGBE_MMC_RXPAUSEHI_CNT_REG		0x098C
+#define SXGBE_MMC_RXFIFOOVERFLOWLO_GBCNT_REG	0x0990
+#define SXGBE_MMC_RXFIFOOVERFLOWHI_GBCNT_REG	0x0994
+#define SXGBE_MMC_RXVLANLO_GBCNT_REG		0x0998
+#define SXGBE_MMC_RXVLANHI_GBCNT_REG		0x099C
+#define SXGBE_MMC_RXWATCHDOG_ERR_REG		0x09A0
+
+/* L3/L4 function registers */
+#define SXGBE_CORE_L34_ADDCTL_REG	0x0C00
+#define SXGBE_CORE_L34_ADDCTL_REG	0x0C00
+#define SXGBE_CORE_L34_DATA_REG		0x0C04
+
+/* ARP registers */
+#define SXGBE_CORE_ARP_ADD_REG		0x0C10
+
+/* RSS registers */
+#define SXGBE_CORE_RSS_CTL_REG		0x0C80
+#define SXGBE_CORE_RSS_ADD_REG		0x0C88
+#define SXGBE_CORE_RSS_DATA_REG		0x0C8C
+
+/* IEEE 1588 registers */
+#define SXGBE_CORE_TSTAMP_CTL_REG	0x0D00
+#define SXGBE_CORE_SUBSEC_INC_REG	0x0D04
+#define SXGBE_CORE_SYSTIME_SEC_REG	0x0D0C
+#define SXGBE_CORE_SYSTIME_NSEC_REG	0x0D10
+#define SXGBE_CORE_SYSTIME_SECUP_REG	0x0D14
+#define SXGBE_CORE_TSTAMP_ADD_REG	0x0D18
+#define SXGBE_CORE_SYSTIME_HWORD_REG	0x0D1C
+#define SXGBE_CORE_TSTAMP_STATUS_REG	0x0D20
+#define SXGBE_CORE_TXTIME_STATUSNSEC_REG 0x0D30
+#define SXGBE_CORE_TXTIME_STATUSSEC_REG	0x0D34
+
+/* Auxiliary registers */
+#define SXGBE_CORE_AUX_CTL_REG			 0x0D40
+#define SXGBE_CORE_AUX_TSTAMP_NSEC_REG		 0x0D48
+#define SXGBE_CORE_AUX_TSTAMP_SEC_REG		 0x0D4C
+#define SXGBE_CORE_AUX_TSTAMP_INGCOR_REG	 0x0D50
+#define SXGBE_CORE_AUX_TSTAMP_ENGCOR_REG	 0x0D54
+#define SXGBE_CORE_AUX_TSTAMP_INGCOR_NSEC_REG	 0x0D58
+#define SXGBE_CORE_AUX_TSTAMP_INGCOR_SUBNSEC_REG 0x0D5C
+#define SXGBE_CORE_AUX_TSTAMP_ENGCOR_NSEC_REG	 0x0D60
+#define SXGBE_CORE_AUX_TSTAMP_ENGCOR_SUBNSEC_REG 0x0D64
+
+/* PPS registers */
+#define SXGBE_CORE_PPS_CTL_REG		0x0D70
+#define SXGBE_CORE_PPS_BASE			0x0D80
+
+/* addr = 0 - 3 */
+#define SXGBE_CORE_PPS_TTIME_SEC_REG(addr)		\
+	(SXGBE_CORE_PPS_BASE + (0x10 * addr) + 0x0)
+#define SXGBE_CORE_PPS_TTIME_NSEC_REG(addr)		\
+	(SXGBE_CORE_PPS_BASE + (0x10 * addr) + 0x4)
+#define SXGBE_CORE_PPS_INTERVAL_REG(addr)		\
+	(SXGBE_CORE_PPS_BASE + (0x10 * addr) + 0x8)
+#define SXGBE_CORE_PPS_WIDTH_REG(addr)			\
+	(SXGBE_CORE_PPS_BASE + (0x10 * addr) + 0xC)
+#define SXGBE_CORE_PTO_CTL_REG		0x0DC0
+#define SXGBE_CORE_SRCPORT_ITY0_REG	0x0DC4
+#define SXGBE_CORE_SRCPORT_ITY1_REG	0x0DC8
+#define SXGBE_CORE_SRCPORT_ITY2_REG	0x0DCC
+#define SXGBE_CORE_LOGMSG_LEVEL_REG	0x0DD0
+
+/* SXGBE MTL Registers */
+#define SXGBE_MTL_BASE_REG		0x1000
+#define SXGBE_MTL_OP_MODE_REG		(SXGBE_MTL_BASE_REG + 0x0000)
+#define SXGBE_MTL_DEBUG_CTL_REG		(SXGBE_MTL_BASE_REG + 0x0008)
+#define SXGBE_MTL_DEBUG_STATUS_REG	(SXGBE_MTL_BASE_REG + 0x000C)
+#define SXGBE_MTL_FIFO_DEBUGDATA_REG	(SXGBE_MTL_BASE_REG + 0x0010)
+#define SXGBE_MTL_INT_STATUS_REG	(SXGBE_MTL_BASE_REG + 0x0020)
+#define SXGBE_MTL_RXQ_DMAMAP0_REG	(SXGBE_MTL_BASE_REG + 0x0030)
+#define SXGBE_MTL_RXQ_DMAMAP1_REG	(SXGBE_MTL_BASE_REG + 0x0034)
+#define SXGBE_MTL_RXQ_DMAMAP2_REG	(SXGBE_MTL_BASE_REG + 0x0038)
+#define SXGBE_MTL_TX_PRTYMAP0_REG	(SXGBE_MTL_BASE_REG + 0x0040)
+#define SXGBE_MTL_TX_PRTYMAP1_REG	(SXGBE_MTL_BASE_REG + 0x0044)
+
+/* TC/Queue registers, qnum=0-15 */
+#define SXGBE_MTL_TC_TXBASE_REG		(SXGBE_MTL_BASE_REG + 0x0100)
+#define SXGBE_MTL_TXQ_OPMODE_REG(qnum)				\
+	(SXGBE_MTL_TC_TXBASE_REG + (qnum * 0x80) + 0x00)
+#define SXGBE_MTL_SFMODE		BIT(1)
+#define SXGBE_MTL_FIFO_LSHIFT		16
+#define SXGBE_MTL_ENABLE_QUEUE		0x00000008
+#define SXGBE_MTL_TXQ_UNDERFLOW_REG(qnum)			\
+	(SXGBE_MTL_TC_TXBASE_REG + (qnum * 0x80) + 0x04)
+#define SXGBE_MTL_TXQ_DEBUG_REG(qnum)				\
+	(SXGBE_MTL_TC_TXBASE_REG + (qnum * 0x80) + 0x08)
+#define SXGBE_MTL_TXQ_ETSCTL_REG(qnum)				\
+	(SXGBE_MTL_TC_TXBASE_REG + (qnum * 0x80) + 0x10)
+#define SXGBE_MTL_TXQ_ETSSTATUS_REG(qnum)			\
+	(SXGBE_MTL_TC_TXBASE_REG + (qnum * 0x80) + 0x14)
+#define SXGBE_MTL_TXQ_QUANTWEIGHT_REG(qnum)			\
+	(SXGBE_MTL_TC_TXBASE_REG + (qnum * 0x80) + 0x18)
+
+#define SXGBE_MTL_TC_RXBASE_REG		0x1140
+#define SXGBE_RX_MTL_SFMODE		BIT(5)
+#define SXGBE_MTL_RXQ_OPMODE_REG(qnum)				\
+	(SXGBE_MTL_TC_RXBASE_REG + (qnum * 0x80) + 0x00)
+#define SXGBE_MTL_RXQ_MISPKTOVERFLOW_REG(qnum)			\
+	(SXGBE_MTL_TC_RXBASE_REG + (qnum * 0x80) + 0x04)
+#define SXGBE_MTL_RXQ_DEBUG_REG(qnum)				\
+	(SXGBE_MTL_TC_RXBASE_REG + (qnum * 0x80) + 0x08)
+#define SXGBE_MTL_RXQ_CTL_REG(qnum)				\
+	(SXGBE_MTL_TC_RXBASE_REG + (qnum * 0x80) + 0x0C)
+#define SXGBE_MTL_RXQ_INTENABLE_REG(qnum)			\
+	(SXGBE_MTL_TC_RXBASE_REG + (qnum * 0x80) + 0x30)
+#define SXGBE_MTL_RXQ_INTSTATUS_REG(qnum)			\
+	(SXGBE_MTL_TC_RXBASE_REG + (qnum * 0x80) + 0x34)
+
+/* SXGBE DMA Registers */
+#define SXGBE_DMA_BASE_REG		0x3000
+#define SXGBE_DMA_MODE_REG		(SXGBE_DMA_BASE_REG + 0x0000)
+#define SXGBE_DMA_SOFT_RESET		BIT(0)
+#define SXGBE_DMA_SYSBUS_MODE_REG	(SXGBE_DMA_BASE_REG + 0x0004)
+#define SXGBE_DMA_AXI_UNDEF_BURST	BIT(0)
+#define SXGBE_DMA_ENHACE_ADDR_MODE	BIT(11)
+#define SXGBE_DMA_INT_STATUS_REG	(SXGBE_DMA_BASE_REG + 0x0008)
+#define SXGBE_DMA_AXI_ARCACHECTL_REG	(SXGBE_DMA_BASE_REG + 0x0010)
+#define SXGBE_DMA_AXI_AWCACHECTL_REG	(SXGBE_DMA_BASE_REG + 0x0018)
+#define SXGBE_DMA_DEBUG_STATUS0_REG	(SXGBE_DMA_BASE_REG + 0x0020)
+#define SXGBE_DMA_DEBUG_STATUS1_REG	(SXGBE_DMA_BASE_REG + 0x0024)
+#define SXGBE_DMA_DEBUG_STATUS2_REG	(SXGBE_DMA_BASE_REG + 0x0028)
+#define SXGBE_DMA_DEBUG_STATUS3_REG	(SXGBE_DMA_BASE_REG + 0x002C)
+#define SXGBE_DMA_DEBUG_STATUS4_REG	(SXGBE_DMA_BASE_REG + 0x0030)
+#define SXGBE_DMA_DEBUG_STATUS5_REG	(SXGBE_DMA_BASE_REG + 0x0034)
+
+/* Channel Registers, cha_num = 0-15 */
+#define SXGBE_DMA_CHA_BASE_REG			\
+	(SXGBE_DMA_BASE_REG + 0x0100)
+#define SXGBE_DMA_CHA_CTL_REG(cha_num)				\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x00)
+#define SXGBE_DMA_PBL_X8MODE			BIT(16)
+#define SXGBE_DMA_CHA_TXCTL_TSE_ENABLE		BIT(12)
+#define SXGBE_DMA_CHA_TXCTL_REG(cha_num)			\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x04)
+#define SXGBE_DMA_CHA_RXCTL_REG(cha_num)			\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x08)
+#define SXGBE_DMA_CHA_TXDESC_HADD_REG(cha_num)			\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x10)
+#define SXGBE_DMA_CHA_TXDESC_LADD_REG(cha_num)			\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x14)
+#define SXGBE_DMA_CHA_RXDESC_HADD_REG(cha_num)			\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x18)
+#define SXGBE_DMA_CHA_RXDESC_LADD_REG(cha_num)			\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x1C)
+#define SXGBE_DMA_CHA_TXDESC_TAILPTR_REG(cha_num)		\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x24)
+#define SXGBE_DMA_CHA_RXDESC_TAILPTR_REG(cha_num)		\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x2C)
+#define SXGBE_DMA_CHA_TXDESC_RINGLEN_REG(cha_num)		\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x30)
+#define SXGBE_DMA_CHA_RXDESC_RINGLEN_REG(cha_num)		\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x34)
+#define SXGBE_DMA_CHA_INT_ENABLE_REG(cha_num)			\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x38)
+#define SXGBE_DMA_CHA_INT_RXWATCHTMR_REG(cha_num)		\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x3C)
+#define SXGBE_DMA_CHA_TXDESC_CURADDLO_REG(cha_num)		\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x44)
+#define SXGBE_DMA_CHA_RXDESC_CURADDLO_REG(cha_num)		\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x4C)
+#define SXGBE_DMA_CHA_CURTXBUF_ADDHI_REG(cha_num)		\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x50)
+#define SXGBE_DMA_CHA_CURTXBUF_ADDLO_REG(cha_num)		\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x54)
+#define SXGBE_DMA_CHA_CURRXBUF_ADDHI_REG(cha_num)		\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x58)
+#define SXGBE_DMA_CHA_CURRXBUF_ADDLO_REG(cha_num)		\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x5C)
+#define SXGBE_DMA_CHA_STATUS_REG(cha_num)			\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x60)
+
+/* TX DMA control register specific */
+#define SXGBE_TX_START_DMA	BIT(0)
+
+/* sxgbe tx configuration register bitfields */
+#define SXGBE_SPEED_10G		0x0
+#define SXGBE_SPEED_2_5G	0x1
+#define SXGBE_SPEED_1G		0x2
+#define SXGBE_SPEED_LSHIFT	29
+
+#define SXGBE_TX_ENABLE		BIT(0)
+#define SXGBE_TX_DISDIC_ALGO	BIT(1)
+#define SXGBE_TX_JABBER_DISABLE	BIT(16)
+
+/* sxgbe rx configuration register bitfields */
+#define SXGBE_RX_ENABLE		BIT(0)
+#define SXGBE_RX_ACS_ENABLE		BIT(1)
+#define SXGBE_RX_WATCHDOG_DISABLE	BIT(7)
+#define SXGBE_RX_JUMBPKT_ENABLE		BIT(8)
+#define SXGBE_RX_CSUMOFFLOAD_ENABLE	BIT(9)
+#define SXGBE_RX_LOOPBACK_ENABLE	BIT(10)
+#define SXGBE_RX_ARPOFFLOAD_ENABLE	BIT(31)
+
+/* sxgbe vlan Tag Register bitfields */
+#define SXGBE_VLAN_SVLAN_ENABLE		BIT(18)
+#define SXGBE_VLAN_DOUBLEVLAN_ENABLE	BIT(26)
+#define SXGBE_VLAN_INNERVLAN_ENABLE	BIT(27)
+
+/* XMAC VLAN Tag Inclusion Register(0x0060) bitfields
+ * Below fields same for  Inner VLAN Tag Inclusion
+ * Register(0x0064) register
+ */
+enum vlan_tag_ctl_tx {
+	VLAN_TAG_TX_NOP,
+	VLAN_TAG_TX_DEL,
+	VLAN_TAG_TX_INSERT,
+	VLAN_TAG_TX_REPLACE
+};
+#define SXGBE_VLAN_PRTY_CTL	BIT(18)
+#define SXGBE_VLAN_CSVL_CTL	BIT(19)
+
+/* SXGBE TX Q Flow Control Register bitfields */
+#define SXGBE_TX_FLOW_CTL_FCB	BIT(0)
+#define SXGBE_TX_FLOW_CTL_TFB	BIT(1)
+
+/* SXGBE RX Q Flow Control Register bitfields */
+#define SXGBE_RX_FLOW_CTL_ENABLE	BIT(0)
+#define SXGBE_RX_UNICAST_DETECT		BIT(1)
+#define SXGBE_RX_PRTYFLOW_CTL_ENABLE	BIT(8)
+
+/* sxgbe rx Q control0 register bitfields */
+#define SXGBE_RX_Q_ENABLE	0x2
+
+/* SXGBE hardware features bitfield specific */
+/* Capability Register 0 */
+#define SXGBE_HW_FEAT_GMII(cap)			((cap & 0x00000002) >> 1)
+#define SXGBE_HW_FEAT_VLAN_HASH_FILTER(cap)	((cap & 0x00000010) >> 4)
+#define SXGBE_HW_FEAT_SMA(cap)			((cap & 0x00000020) >> 5)
+#define SXGBE_HW_FEAT_PMT_TEMOTE_WOP(cap)	((cap & 0x00000040) >> 6)
+#define SXGBE_HW_FEAT_PMT_MAGIC_PKT(cap)	((cap & 0x00000080) >> 7)
+#define SXGBE_HW_FEAT_RMON(cap)			((cap & 0x00000100) >> 8)
+#define SXGBE_HW_FEAT_ARP_OFFLOAD(cap)		((cap & 0x00000200) >> 9)
+#define SXGBE_HW_FEAT_IEEE1500_2008(cap)	((cap & 0x00001000) >> 12)
+#define SXGBE_HW_FEAT_EEE(cap)			((cap & 0x00002000) >> 13)
+#define SXGBE_HW_FEAT_TX_CSUM_OFFLOAD(cap)	((cap & 0x00004000) >> 14)
+#define SXGBE_HW_FEAT_RX_CSUM_OFFLOAD(cap)	((cap & 0x00010000) >> 16)
+#define SXGBE_HW_FEAT_MACADDR_COUNT(cap)	((cap & 0x007C0000) >> 18)
+#define SXGBE_HW_FEAT_TSTMAP_SRC(cap)		((cap & 0x06000000) >> 25)
+#define SXGBE_HW_FEAT_SRCADDR_VLAN(cap)		((cap & 0x08000000) >> 27)
+
+/* Capability Register 1 */
+#define SXGBE_HW_FEAT_RX_FIFO_SIZE(cap)		((cap & 0x0000001F))
+#define SXGBE_HW_FEAT_TX_FIFO_SIZE(cap)		((cap & 0x000007C0) >> 6)
+#define SXGBE_HW_FEAT_IEEE1588_HWORD(cap)	((cap & 0x00002000) >> 13)
+#define SXGBE_HW_FEAT_DCB(cap)			((cap & 0x00010000) >> 16)
+#define SXGBE_HW_FEAT_SPLIT_HDR(cap)		((cap & 0x00020000) >> 17)
+#define SXGBE_HW_FEAT_TSO(cap)			((cap & 0x00040000) >> 18)
+#define SXGBE_HW_FEAT_DEBUG_MEM_IFACE(cap)	((cap & 0x00080000) >> 19)
+#define SXGBE_HW_FEAT_RSS(cap)			((cap & 0x00100000) >> 20)
+#define SXGBE_HW_FEAT_HASH_TABLE_SIZE(cap)	((cap & 0x03000000) >> 24)
+#define SXGBE_HW_FEAT_L3L4_FILTER_NUM(cap)	((cap & 0x78000000) >> 27)
+
+/* Capability Register 2 */
+#define SXGBE_HW_FEAT_RX_MTL_QUEUES(cap)	((cap & 0x0000000F))
+#define SXGBE_HW_FEAT_TX_MTL_QUEUES(cap)	((cap & 0x000003C0) >> 6)
+#define SXGBE_HW_FEAT_RX_DMA_CHANNELS(cap)	((cap & 0x0000F000) >> 12)
+#define SXGBE_HW_FEAT_TX_DMA_CHANNELS(cap)	((cap & 0x003C0000) >> 18)
+#define SXGBE_HW_FEAT_PPS_OUTPUTS(cap)		((cap & 0x07000000) >> 24)
+#define SXGBE_HW_FEAT_AUX_SNAPSHOTS(cap)	((cap & 0x70000000) >> 28)
+
+/* DMAchannel interrupt enable specific */
+/* DMA Normal interrupt */
+#define SXGBE_DMA_INT_ENA_NIE	BIT(16)	/* Normal Summary */
+#define SXGBE_DMA_INT_ENA_TIE	BIT(0)	/* Transmit Interrupt */
+#define SXGBE_DMA_INT_ENA_TUE	BIT(2)	/* Transmit Buffer Unavailable */
+#define SXGBE_DMA_INT_ENA_RIE	BIT(6)	/* Receive Interrupt */
+
+#define SXGBE_DMA_INT_NORMAL					\
+	(SXGBE_DMA_INT_ENA_NIE | SXGBE_DMA_INT_ENA_RIE |	\
+	 SXGBE_DMA_INT_ENA_TIE | SXGBE_DMA_INT_ENA_TUE)
+
+/* DMA Abnormal interrupt */
+#define SXGBE_DMA_INT_ENA_AIE	BIT(15)	/* Abnormal Summary */
+#define SXGBE_DMA_INT_ENA_TSE	BIT(1)	/* Transmit Stopped */
+#define SXGBE_DMA_INT_ENA_RUE	BIT(7)	/* Receive Buffer Unavailable */
+#define SXGBE_DMA_INT_ENA_RSE	BIT(8)	/* Receive Stopped */
+#define SXGBE_DMA_INT_ENA_FBE	BIT(12)	/* Fatal Bus Error */
+#define SXGBE_DMA_INT_ENA_CDEE	BIT(13)	/* Context Descriptor Error */
+
+#define SXGBE_DMA_INT_ABNORMAL					\
+	(SXGBE_DMA_INT_ENA_AIE | SXGBE_DMA_INT_ENA_TSE |	\
+	 SXGBE_DMA_INT_ENA_RUE | SXGBE_DMA_INT_ENA_RSE |	\
+	 SXGBE_DMA_INT_ENA_FBE | SXGBE_DMA_INT_ENA_CDEE)
+
+#define SXGBE_DMA_ENA_INT	(SXGBE_DMA_INT_NORMAL | SXGBE_DMA_INT_ABNORMAL)
+
+/* DMA channel interrupt status specific */
+#define	SXGBE_DMA_INT_STATUS_REB2	BIT(21)
+#define	SXGBE_DMA_INT_STATUS_REB1	BIT(20)
+#define	SXGBE_DMA_INT_STATUS_REB0	BIT(19)
+#define	SXGBE_DMA_INT_STATUS_TEB2	BIT(18)
+#define	SXGBE_DMA_INT_STATUS_TEB1	BIT(17)
+#define	SXGBE_DMA_INT_STATUS_TEB0	BIT(16)
+#define	SXGBE_DMA_INT_STATUS_NIS	BIT(15)
+#define SXGBE_DMA_INT_STATUS_AIS	BIT(14)
+#define SXGBE_DMA_INT_STATUS_CTXTERR	BIT(13)
+#define SXGBE_DMA_INT_STATUS_FBE	BIT(12)
+#define SXGBE_DMA_INT_STATUS_RPS	BIT(8)
+#define SXGBE_DMA_INT_STATUS_RBU	BIT(7)
+#define SXGBE_DMA_INT_STATUS_RI		BIT(6)
+#define SXGBE_DMA_INT_STATUS_TBU	BIT(2)
+#define SXGBE_DMA_INT_STATUS_TPS	BIT(1)
+#define SXGBE_DMA_INT_STATUS_TI		BIT(0)
+
+#endif /* __SXGBE_REGMAP_H__ */
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_xpcs.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_xpcs.c
new file mode 100644
index 0000000..55eba99
--- /dev/null
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_xpcs.c
@@ -0,0 +1,92 @@ 
+/* 10G controller driver for Samsung SoCs
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Siva Reddy Kallam <siva.kallam@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/bitops.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include "sxgbe_common.h"
+#include "sxgbe_xpcs.h"
+
+static int sxgbe_xpcs_read(struct net_device *ndev, unsigned int reg)
+{
+	u32 value;
+	struct sxgbe_priv_data *priv = netdev_priv(ndev);
+
+	value = readl(priv->ioaddr + XPCS_OFFSET + reg);
+
+	return value;
+}
+
+static int sxgbe_xpcs_write(struct net_device *ndev, int reg, int data)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(ndev);
+
+	writel(data, priv->ioaddr + XPCS_OFFSET + reg);
+
+	return 0;
+}
+
+int sxgbe_xpcs_init(struct net_device *ndev)
+{
+	u32 value;
+
+	value = sxgbe_xpcs_read(ndev, SR_PCS_MMD_CONTROL1);
+	/* 10G XAUI mode */
+	sxgbe_xpcs_write(ndev, SR_PCS_CONTROL2, XPCS_TYPE_SEL_X);
+	sxgbe_xpcs_write(ndev, VR_PCS_MMD_XAUI_MODE_CONTROL, XPCS_XAUI_MODE);
+	sxgbe_xpcs_write(ndev, VR_PCS_MMD_XAUI_MODE_CONTROL, value | BIT(13));
+	sxgbe_xpcs_write(ndev, SR_PCS_MMD_CONTROL1, value | BIT(11));
+
+	do {
+		value = sxgbe_xpcs_read(ndev, VR_PCS_MMD_DIGITAL_STATUS);
+
+	} while ((value & XPCS_QSEQ_STATE_MPLLOFF) == XPCS_QSEQ_STATE_STABLE);
+
+	value = sxgbe_xpcs_read(ndev, SR_PCS_MMD_CONTROL1);
+	sxgbe_xpcs_write(ndev, SR_PCS_MMD_CONTROL1, value & ~BIT(11));
+
+	do {
+		value = sxgbe_xpcs_read(ndev, VR_PCS_MMD_DIGITAL_STATUS);
+	} while ((value & XPCS_QSEQ_STATE_MPLLOFF) != XPCS_QSEQ_STATE_STABLE);
+
+	return 0;
+}
+
+int sxgbe_xpcs_init_1G(struct net_device *ndev)
+{
+	int value;
+
+	/* 10GBASE-X PCS (1G) mode */
+	sxgbe_xpcs_write(ndev, SR_PCS_CONTROL2, XPCS_TYPE_SEL_X);
+	sxgbe_xpcs_write(ndev, VR_PCS_MMD_XAUI_MODE_CONTROL, XPCS_XAUI_MODE);
+	value = sxgbe_xpcs_read(ndev, SR_PCS_MMD_CONTROL1);
+	sxgbe_xpcs_write(ndev, SR_PCS_MMD_CONTROL1, value & ~BIT(13));
+
+	value = sxgbe_xpcs_read(ndev, SR_MII_MMD_CONTROL);
+	sxgbe_xpcs_write(ndev, SR_MII_MMD_CONTROL, value | BIT(6));
+	sxgbe_xpcs_write(ndev, SR_MII_MMD_CONTROL, value & ~BIT(13));
+	value = sxgbe_xpcs_read(ndev, SR_PCS_MMD_CONTROL1);
+	sxgbe_xpcs_write(ndev, SR_PCS_MMD_CONTROL1, value | BIT(11));
+
+	do {
+		value = sxgbe_xpcs_read(ndev, VR_PCS_MMD_DIGITAL_STATUS);
+	} while ((value & XPCS_QSEQ_STATE_MPLLOFF) != XPCS_QSEQ_STATE_STABLE);
+
+	value = sxgbe_xpcs_read(ndev, SR_PCS_MMD_CONTROL1);
+	sxgbe_xpcs_write(ndev, SR_PCS_MMD_CONTROL1, value & ~BIT(11));
+
+	/* Auto Negotiation cluase 37 enable */
+	value = sxgbe_xpcs_read(ndev, SR_MII_MMD_CONTROL);
+	sxgbe_xpcs_write(ndev, SR_MII_MMD_CONTROL, value | BIT(12));
+
+	return 0;
+}
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_xpcs.h b/drivers/net/ethernet/samsung/sxgbe/sxgbe_xpcs.h
new file mode 100644
index 0000000..6b26a50
--- /dev/null
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_xpcs.h
@@ -0,0 +1,38 @@ 
+/* 10G controller driver for Samsung SoCs
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Byungho An <bh74.an@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __SXGBE_XPCS_H__
+#define __SXGBE_XPCS_H__
+
+/* XPCS Registers */
+#define XPCS_OFFSET			0x1A060000
+#define SR_PCS_MMD_CONTROL1		0x030000
+#define SR_PCS_CONTROL2			0x030007
+#define VR_PCS_MMD_XAUI_MODE_CONTROL	0x038004
+#define VR_PCS_MMD_DIGITAL_STATUS	0x038010
+#define SR_MII_MMD_CONTROL		0x1F0000
+#define SR_MII_MMD_AN_ADV		0x1F0004
+#define SR_MII_MMD_AN_LINK_PARTNER_BA	0x1F0005
+#define VR_MII_MMD_AN_CONTROL		0x1F8001
+#define VR_MII_MMD_AN_INT_STATUS	0x1F8002
+
+#define XPCS_QSEQ_STATE_STABLE		0x10
+#define XPCS_QSEQ_STATE_MPLLOFF		0x1c
+#define XPCS_TYPE_SEL_R			0x00
+#define XPCS_TYPE_SEL_X			0x01
+#define XPCS_TYPE_SEL_W			0x02
+#define XPCS_XAUI_MODE			0x00
+#define XPCS_RXAUI_MODE			0x01
+
+int sxgbe_xpcs_init(struct net_device *ndev);
+int sxgbe_xpcs_init_1G(struct net_device *ndev);
+
+#endif /* __SXGBE_XPCS_H__ */
diff --git a/include/linux/sxgbe_platform.h b/include/linux/sxgbe_platform.h
new file mode 100644
index 0000000..a62442c
--- /dev/null
+++ b/include/linux/sxgbe_platform.h
@@ -0,0 +1,54 @@ 
+/*
+ * 10G controller driver for Samsung EXYNOS SoCs
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Siva Reddy Kallam <siva.kallam@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __SXGBE_PLATFORM_H__
+#define __SXGBE_PLATFORM_H__
+
+/* MDC Clock Selection define*/
+#define SXGBE_CSR_100_150M	0x0	/* MDC = clk_scr_i/62 */
+#define SXGBE_CSR_150_250M	0x1	/* MDC = clk_scr_i/102 */
+#define SXGBE_CSR_250_300M	0x2	/* MDC = clk_scr_i/122 */
+#define SXGBE_CSR_300_350M	0x3	/* MDC = clk_scr_i/142 */
+#define SXGBE_CSR_350_400M	0x4	/* MDC = clk_scr_i/162 */
+#define SXGBE_CSR_400_500M	0x5	/* MDC = clk_scr_i/202 */
+
+/* Platfrom data for platform device structure's
+ * platform_data field
+ */
+struct sxgbe_mdio_bus_data {
+	unsigned int phy_mask;
+	int *irqs;
+	int probed_phy_irq;
+};
+
+struct sxgbe_dma_cfg {
+	int pbl;
+	int fixed_burst;
+	int burst_map;
+	int adv_addr_mode;
+};
+
+struct sxgbe_plat_data {
+	char *phy_bus_name;
+	int bus_id;
+	int phy_addr;
+	int interface;
+	struct sxgbe_mdio_bus_data *mdio_bus_data;
+	struct sxgbe_dma_cfg *dma_cfg;
+	int clk_csr;
+	int pmt;
+	int force_sf_dma_mode;
+	int force_thresh_dma_mode;
+	int riwt_off;
+};
+
+#endif /* __SXGBE_PLATFORM_H__ */