diff mbox series

[v1,2/2] ACPI: OSL: Clean up printing messages

Message ID 3297462.0emgCRZMdL@kreacher
State New
Headers show
Series ACPI: OSL: SImplify acpi_check_resource_confllict() and clean up printing messages | expand

Commit Message

Rafael J. Wysocki Feb. 8, 2021, 6:59 p.m. UTC
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Replace the ACPI_DEBUG_PRINT() instance in osl.c unrelated to the
ACPICA debug with acpi_handle_debug(), add a pr_fmt() definition
to osl.c and replace direct printk() usage in that file with the
suitable pr_*() calls.

While at it, add a physical address value to the message in
acpi_os_map_iomem() and reword a couple of messages to avoid
using function names in them.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 drivers/acpi/osl.c |   35 ++++++++++++++++++-----------------
 1 file changed, 18 insertions(+), 17 deletions(-)

Comments

Joe Perches Feb. 8, 2021, 8:45 p.m. UTC | #1
On Mon, 2021-02-08 at 19:59 +0100, Rafael J. Wysocki wrote:
> Replace the ACPI_DEBUG_PRINT() instance in osl.c unrelated to the
> ACPICA debug with acpi_handle_debug(), add a pr_fmt() definition
> to osl.c and replace direct printk() usage in that file with the
> suitable pr_*() calls.
[]
> ===================================================================
> --- linux-pm.orig/drivers/acpi/osl.c
> +++ linux-pm/drivers/acpi/osl.c
[]
> @@ -528,13 +531,13 @@ acpi_os_predefined_override(const struct
>  
> 
>  	*new_val = NULL;
>  	if (!memcmp(init_val->name, "_OS_", 4) && strlen(acpi_os_name)) {
> -		printk(KERN_INFO PREFIX "Overriding _OS definition to '%s'\n",
> +		pr_info("Overriding _OS definition to '%s'\n",
>  		       acpi_os_name);

If you do more of these, perhaps rewrap lines to 80 columns when possible.

		pr_info("Overriding _OS definition to '%s'\n", acpi_os_name);

etc...
Rafael J. Wysocki Feb. 9, 2021, 2:55 p.m. UTC | #2
On Mon, Feb 8, 2021 at 9:49 PM Joe Perches <joe@perches.com> wrote:
>

> On Mon, 2021-02-08 at 19:59 +0100, Rafael J. Wysocki wrote:

> > Replace the ACPI_DEBUG_PRINT() instance in osl.c unrelated to the

> > ACPICA debug with acpi_handle_debug(), add a pr_fmt() definition

> > to osl.c and replace direct printk() usage in that file with the

> > suitable pr_*() calls.

> []

> > ===================================================================

> > --- linux-pm.orig/drivers/acpi/osl.c

> > +++ linux-pm/drivers/acpi/osl.c

> []

> > @@ -528,13 +531,13 @@ acpi_os_predefined_override(const struct

> >

> >

> >       *new_val = NULL;

> >       if (!memcmp(init_val->name, "_OS_", 4) && strlen(acpi_os_name)) {

> > -             printk(KERN_INFO PREFIX "Overriding _OS definition to '%s'\n",

> > +             pr_info("Overriding _OS definition to '%s'\n",

> >                      acpi_os_name);

>

> If you do more of these, perhaps rewrap lines to 80 columns when possible.

>

>                 pr_info("Overriding _OS definition to '%s'\n", acpi_os_name);

>

> etc...


I've overlooked this one, will fix it up in the final commit.

Thanks!
diff mbox series

Patch

Index: linux-pm/drivers/acpi/osl.c
===================================================================
--- linux-pm.orig/drivers/acpi/osl.c
+++ linux-pm/drivers/acpi/osl.c
@@ -9,6 +9,8 @@ 
  *   Author: Matthew Wilcox <willy@linux.intel.com>
  */
 
+#define pr_fmt(fmt) "ACPI: OSL: " fmt
+
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
@@ -37,6 +39,7 @@ 
 #include "acpica/acnamesp.h"
 #include "internal.h"
 
+/* Definitions for ACPI_DEBUG_PRINT() */
 #define _COMPONENT		ACPI_OS_SERVICES
 ACPI_MODULE_NAME("osl");
 
@@ -327,7 +330,7 @@  void __iomem __ref
 	acpi_size pg_sz;
 
 	if (phys > ULONG_MAX) {
-		printk(KERN_ERR PREFIX "Cannot map memory that high\n");
+		pr_err("Cannot map memory that high: 0x%llx\n", phys);
 		return NULL;
 	}
 
@@ -528,13 +531,13 @@  acpi_os_predefined_override(const struct
 
 	*new_val = NULL;
 	if (!memcmp(init_val->name, "_OS_", 4) && strlen(acpi_os_name)) {
-		printk(KERN_INFO PREFIX "Overriding _OS definition to '%s'\n",
+		pr_info("Overriding _OS definition to '%s'\n",
 		       acpi_os_name);
 		*new_val = acpi_os_name;
 	}
 
 	if (!memcmp(init_val->name, "_REV", 4) && acpi_rev_override) {
-		printk(KERN_INFO PREFIX "Overriding _REV return value to 5\n");
+		pr_info("Overriding _REV return value to 5\n");
 		*new_val = (char *)5;
 	}
 
@@ -575,7 +578,7 @@  acpi_os_install_interrupt_handler(u32 gs
 		return AE_ALREADY_ACQUIRED;
 
 	if (acpi_gsi_to_irq(gsi, &irq) < 0) {
-		printk(KERN_ERR PREFIX "SCI (ACPI GSI %d) not registered\n",
+		pr_err("SCI (ACPI GSI %d) not registered\n",
 		       gsi);
 		return AE_OK;
 	}
@@ -583,7 +586,7 @@  acpi_os_install_interrupt_handler(u32 gs
 	acpi_irq_handler = handler;
 	acpi_irq_context = context;
 	if (request_irq(irq, acpi_irq, IRQF_SHARED, "acpi", acpi_irq)) {
-		printk(KERN_ERR PREFIX "SCI (IRQ%d) allocation failed\n", irq);
+		pr_err("SCI (IRQ%d) allocation failed\n", irq);
 		acpi_irq_handler = NULL;
 		return AE_NOT_ACQUIRED;
 	}
@@ -1071,7 +1074,7 @@  acpi_status acpi_os_execute(acpi_execute
 	if (type == OSL_DEBUGGER_MAIN_THREAD) {
 		ret = acpi_debugger_create_thread(function, context);
 		if (ret) {
-			pr_err("Call to kthread_create() failed.\n");
+			pr_err("Kernel thread creation failed\n");
 			status = AE_ERROR;
 		}
 		goto out_thread;
@@ -1121,8 +1124,7 @@  acpi_status acpi_os_execute(acpi_execute
 	 */
 	ret = queue_work_on(0, queue, &dpc->work);
 	if (!ret) {
-		printk(KERN_ERR PREFIX
-			  "Call to queue_work() failed.\n");
+		pr_err("Unable to queue work\n");
 		status = AE_ERROR;
 	}
 err_workqueue:
@@ -1165,9 +1167,9 @@  acpi_status acpi_hotplug_schedule(struct
 {
 	struct acpi_hp_work *hpw;
 
-	ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
-		  "Scheduling hotplug event (%p, %u) for deferred execution.\n",
-		  adev, src));
+	acpi_handle_debug(adev->handle,
+			  "Scheduling hotplug event %u for deferred handling\n",
+			   src);
 
 	hpw = kmalloc(sizeof(*hpw), GFP_KERNEL);
 	if (!hpw)
@@ -1355,7 +1357,7 @@  acpi_status acpi_os_signal(u32 function,
 {
 	switch (function) {
 	case ACPI_SIGNAL_FATAL:
-		printk(KERN_ERR PREFIX "Fatal opcode executed\n");
+		pr_err("Fatal opcode executed\n");
 		break;
 	case ACPI_SIGNAL_BREAKPOINT:
 		/*
@@ -1407,7 +1409,7 @@  __setup("acpi_os_name=", acpi_os_name_se
 static int __init acpi_no_auto_serialize_setup(char *str)
 {
 	acpi_gbl_auto_serialize_methods = FALSE;
-	pr_info("ACPI: auto-serialization disabled\n");
+	pr_info("Auto-serialization disabled\n");
 
 	return 1;
 }
@@ -1712,7 +1714,7 @@  acpi_status acpi_os_release_object(acpi_
 static int __init acpi_no_static_ssdt_setup(char *s)
 {
 	acpi_gbl_disable_ssdt_table_install = TRUE;
-	pr_info("ACPI: static SSDT installation disabled\n");
+	pr_info("Static SSDT installation disabled\n");
 
 	return 0;
 }
@@ -1721,8 +1723,7 @@  early_param("acpi_no_static_ssdt", acpi_
 
 static int __init acpi_disable_return_repair(char *s)
 {
-	printk(KERN_NOTICE PREFIX
-	       "ACPI: Predefined validation mechanism disabled\n");
+	pr_notice("Predefined validation mechanism disabled\n");
 	acpi_gbl_disable_auto_repair = TRUE;
 
 	return 1;
@@ -1748,7 +1749,7 @@  acpi_status __init acpi_os_initialize(vo
 		void *rv;
 
 		rv = acpi_os_map_generic_address(&acpi_gbl_FADT.reset_register);
-		pr_debug(PREFIX "%s: map reset_reg %s\n", __func__,
+		pr_debug("%s: map reset_reg %s\n", __func__,
 			 rv ? "successful" : "failed");
 	}
 	acpi_os_initialized = true;