| Message ID | 20210225193754.1898064-1-ilias.apalodimas@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | configs: stm32mp1: enable uefi related commands | expand |
Hi Ilias On 2/25/21 8:37 PM, Ilias Apalodimas wrote: > The board can boot with UEFI. With the latest changes in U-Boot's > EFI subsystem we also have support for EFI runtime variables, without > SetVariable support. We can also store the EFI variables in a file on the > ESP partition and preserve them across reboots. > The env and efidebug commands are missing in order to configure > EFI variables and the efibootmgr though. Since U-Boot's default config > enables other EFI related commands (e.g bootefi), let's add the env related > and efidebug commands and allow users to do that > > Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> > --- > configs/stm32mp15_trusted_defconfig | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/configs/stm32mp15_trusted_defconfig b/configs/stm32mp15_trusted_defconfig > index da31b74cdeb6..107041119f1d 100644 > --- a/configs/stm32mp15_trusted_defconfig > +++ b/configs/stm32mp15_trusted_defconfig > @@ -17,6 +17,7 @@ CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" > CONFIG_SYS_PROMPT="STM32MP> " > CONFIG_CMD_ADTIMG=y > CONFIG_CMD_ERASEENV=y > +CONFIG_CMD_NVEDIT_EFI=y > CONFIG_CMD_MEMINFO=y > CONFIG_CMD_MEMTEST=y > CONFIG_CMD_ADC=y > @@ -32,6 +33,7 @@ CONFIG_CMD_USB=y > CONFIG_CMD_USB_MASS_STORAGE=y > CONFIG_CMD_BMP=y > CONFIG_CMD_CACHE=y > +CONFIG_CMD_EFIDEBUG=y > CONFIG_CMD_TIME=y > CONFIG_CMD_TIMER=y > CONFIG_CMD_PMIC=y > @@ -144,4 +146,5 @@ CONFIG_BMP_32BPP=y > CONFIG_WDT=y > CONFIG_WDT_STM32MP=y > CONFIG_ERRNO_STR=y > +# CONFIG_HEXDUMP is not set > CONFIG_FDT_FIXUP_PARTITIONS=y I am ok with tha added configs. But can you update also the stm32_basic_defconfig: for STMicroelectronics boards, we want to have the the same configuation between basic and trusted boot chain (except SPL or OP-TEE related config). Thanks Patrick
On Fri, Feb 26, 2021 at 01:38:21PM +0100, Patrick DELAUNAY wrote: > Hi Ilias > > On 2/25/21 8:37 PM, Ilias Apalodimas wrote: > > The board can boot with UEFI. With the latest changes in U-Boot's > > EFI subsystem we also have support for EFI runtime variables, without > > SetVariable support. We can also store the EFI variables in a file on the > > ESP partition and preserve them across reboots. > > The env and efidebug commands are missing in order to configure > > EFI variables and the efibootmgr though. Since U-Boot's default config > > enables other EFI related commands (e.g bootefi), let's add the env related > > and efidebug commands and allow users to do that > > > > Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> > > --- > > configs/stm32mp15_trusted_defconfig | 3 +++ > > 1 file changed, 3 insertions(+) > > > > diff --git a/configs/stm32mp15_trusted_defconfig b/configs/stm32mp15_trusted_defconfig > > index da31b74cdeb6..107041119f1d 100644 > > --- a/configs/stm32mp15_trusted_defconfig > > +++ b/configs/stm32mp15_trusted_defconfig > > @@ -17,6 +17,7 @@ CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" > > CONFIG_SYS_PROMPT="STM32MP> " > > CONFIG_CMD_ADTIMG=y > > CONFIG_CMD_ERASEENV=y > > +CONFIG_CMD_NVEDIT_EFI=y > > CONFIG_CMD_MEMINFO=y > > CONFIG_CMD_MEMTEST=y > > CONFIG_CMD_ADC=y > > @@ -32,6 +33,7 @@ CONFIG_CMD_USB=y > > CONFIG_CMD_USB_MASS_STORAGE=y > > CONFIG_CMD_BMP=y > > CONFIG_CMD_CACHE=y > > +CONFIG_CMD_EFIDEBUG=y > > CONFIG_CMD_TIME=y > > CONFIG_CMD_TIMER=y > > CONFIG_CMD_PMIC=y > > @@ -144,4 +146,5 @@ CONFIG_BMP_32BPP=y > > CONFIG_WDT=y > > CONFIG_WDT_STM32MP=y > > CONFIG_ERRNO_STR=y > > +# CONFIG_HEXDUMP is not set > > CONFIG_FDT_FIXUP_PARTITIONS=y > > > I am ok with tha added configs. > > > But can you update also the stm32_basic_defconfig: > > for STMicroelectronics boards, we want to have the the same > > configuation between basic and trusted boot chain > > (except SPL or OP-TEE related config). Yea sure, Cheers /Ilias > > > Thanks > > > Patrick >
diff --git a/configs/stm32mp15_trusted_defconfig b/configs/stm32mp15_trusted_defconfig index da31b74cdeb6..107041119f1d 100644 --- a/configs/stm32mp15_trusted_defconfig +++ b/configs/stm32mp15_trusted_defconfig @@ -17,6 +17,7 @@ CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" CONFIG_SYS_PROMPT="STM32MP> " CONFIG_CMD_ADTIMG=y CONFIG_CMD_ERASEENV=y +CONFIG_CMD_NVEDIT_EFI=y CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_ADC=y @@ -32,6 +33,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_CMD_BMP=y CONFIG_CMD_CACHE=y +CONFIG_CMD_EFIDEBUG=y CONFIG_CMD_TIME=y CONFIG_CMD_TIMER=y CONFIG_CMD_PMIC=y @@ -144,4 +146,5 @@ CONFIG_BMP_32BPP=y CONFIG_WDT=y CONFIG_WDT_STM32MP=y CONFIG_ERRNO_STR=y +# CONFIG_HEXDUMP is not set CONFIG_FDT_FIXUP_PARTITIONS=y
The board can boot with UEFI. With the latest changes in U-Boot's EFI subsystem we also have support for EFI runtime variables, without SetVariable support. We can also store the EFI variables in a file on the ESP partition and preserve them across reboots. The env and efidebug commands are missing in order to configure EFI variables and the efibootmgr though. Since U-Boot's default config enables other EFI related commands (e.g bootefi), let's add the env related and efidebug commands and allow users to do that Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> --- configs/stm32mp15_trusted_defconfig | 3 +++ 1 file changed, 3 insertions(+) -- 2.30.1