diff mbox series

[1/2] arm64: dts: ti: k3-am64-main: Add OSPI node

Message ID 20210309130514.11740-1-vigneshr@ti.com
State Superseded
Headers show
Series [1/2] arm64: dts: ti: k3-am64-main: Add OSPI node | expand

Commit Message

Vignesh Raghavendra March 9, 2021, 1:05 p.m. UTC
AM64 SoC has a single Octal SPI (OSPI) instance under Flash SubSystem
(FSS).  Add DT entry for the same.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 25 ++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

Comments

Pratyush Yadav March 9, 2021, 1:17 p.m. UTC | #1
On 09/03/21 06:35PM, Vignesh Raghavendra wrote:
> Both AM64 EVM and SK have a 512Mb S28HS512T Octal SPI NOR flash.
> Add DT node for the same.
> 
> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

Reviewed-by: Pratyush Yadav <p.yadav@ti.com>

> ---
> 
> Bootlog:
> 
> SK: https://pastebin.ubuntu.com/p/gvxg7cFrXH/
> EVM: https://pastebin.ubuntu.com/p/jb39GqkB78/
> 
>  arch/arm64/boot/dts/ti/k3-am642-evm.dts | 36 +++++++++++++++++++++++++
>  arch/arm64/boot/dts/ti/k3-am642-sk.dts  | 36 +++++++++++++++++++++++++
>  2 files changed, 72 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
> index 1f1787750fef..7dd8e94b108d 100644
> --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
> @@ -133,6 +133,22 @@ AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */
>  			AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */
>  		>;
>  	};
> +
> +	ospi0_pins_default: ospi0-pins-default {
> +		pinctrl-single,pins = <
> +			AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */
> +			AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */
> +			AM64X_IOPAD(0x000c, PIN_INPUT, 0) /* (M19) OSPI0_D0 */
> +			AM64X_IOPAD(0x0010, PIN_INPUT, 0) /* (M18) OSPI0_D1 */
> +			AM64X_IOPAD(0x0014, PIN_INPUT, 0) /* (M20) OSPI0_D2 */
> +			AM64X_IOPAD(0x0018, PIN_INPUT, 0) /* (M21) OSPI0_D3 */
> +			AM64X_IOPAD(0x001c, PIN_INPUT, 0) /* (P21) OSPI0_D4 */
> +			AM64X_IOPAD(0x0020, PIN_INPUT, 0) /* (P20) OSPI0_D5 */
> +			AM64X_IOPAD(0x0024, PIN_INPUT, 0) /* (N18) OSPI0_D6 */
> +			AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* (M17) OSPI0_D7 */
> +			AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */
> +		>;
> +	};
>  };
>  
>  &main_uart0 {
> @@ -244,3 +260,23 @@ &sdhci1 {
>  	ti,driver-strength-ohm = <50>;
>  	disable-wp;
>  };
> +
> +&ospi0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&ospi0_pins_default>;
> +
> +	flash@0{
> +		compatible = "jedec,spi-nor";
> +		reg = <0x0>;
> +		spi-tx-bus-width = <8>;
> +		spi-rx-bus-width = <8>;
> +		spi-max-frequency = <25000000>;
> +		cdns,tshsl-ns = <60>;
> +		cdns,tsd2d-ns = <60>;
> +		cdns,tchsh-ns = <60>;
> +		cdns,tslch-ns = <60>;
> +		cdns,read-delay = <4>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +	};
> +};
> diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
> index aa6ca4c49153..fc27470fc083 100644
> --- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
> @@ -90,6 +90,22 @@ AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */
>  			AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */
>  		>;
>  	};
> +
> +	ospi0_pins_default: ospi0-pins-default {
> +		pinctrl-single,pins = <
> +			AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */
> +			AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */
> +			AM64X_IOPAD(0x000c, PIN_INPUT, 0) /* (M19) OSPI0_D0 */
> +			AM64X_IOPAD(0x0010, PIN_INPUT, 0) /* (M18) OSPI0_D1 */
> +			AM64X_IOPAD(0x0014, PIN_INPUT, 0) /* (M20) OSPI0_D2 */
> +			AM64X_IOPAD(0x0018, PIN_INPUT, 0) /* (M21) OSPI0_D3 */
> +			AM64X_IOPAD(0x001c, PIN_INPUT, 0) /* (P21) OSPI0_D4 */
> +			AM64X_IOPAD(0x0020, PIN_INPUT, 0) /* (P20) OSPI0_D5 */
> +			AM64X_IOPAD(0x0024, PIN_INPUT, 0) /* (N18) OSPI0_D6 */
> +			AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* (M17) OSPI0_D7 */
> +			AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */
> +		>;
> +	};
>  };
>  
>  &mcu_uart0 {
> @@ -171,3 +187,23 @@ &sdhci1 {
>  	ti,driver-strength-ohm = <50>;
>  	disable-wp;
>  };
> +
> +&ospi0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&ospi0_pins_default>;
> +
> +	flash@0{
> +		compatible = "jedec,spi-nor";
> +		reg = <0x0>;
> +		spi-tx-bus-width = <8>;
> +		spi-rx-bus-width = <8>;
> +		spi-max-frequency = <25000000>;
> +		cdns,tshsl-ns = <60>;
> +		cdns,tsd2d-ns = <60>;
> +		cdns,tchsh-ns = <60>;
> +		cdns,tslch-ns = <60>;
> +		cdns,read-delay = <4>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +	};
> +};
> -- 
> 2.30.1
>
Vignesh Raghavendra March 10, 2021, 5:34 p.m. UTC | #2
Hi Nishanth

On 3/9/21 6:35 PM, Vignesh Raghavendra wrote:
> AM64 SoC has a single Octal SPI (OSPI) instance under Flash SubSystem

> (FSS).  Add DT entry for the same.

> 

> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

> ---


Please ignore the series. I see some instabilities in my testing... Will
repost once I have addressed them. Sorry for the noise.


Regards
Vignesh

>  arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 25 ++++++++++++++++++++++++

>  1 file changed, 25 insertions(+)

> 

> diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi

> index 5f85950daef7..bcec4fa444b5 100644

> --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi

> +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi

> @@ -402,4 +402,29 @@ sdhci1: mmc@fa00000 {

>  		ti,otap-del-sel-ddr50 = <0x9>;

>  		ti,clkbuf-sel = <0x7>;

>  	};

> +

> +	fss: bus@fc00000 {

> +		compatible = "simple-bus";

> +		reg = <0x00 0x0fc00000 0x00 0x70000>;

> +		#address-cells = <2>;

> +		#size-cells = <2>;

> +		ranges;

> +

> +		ospi0: spi@fc40000 {

> +			compatible = "ti,am654-ospi", "cdns,qspi-nor";

> +			reg = <0x00 0x0fc40000 0x00 0x100>,

> +			      <0x05 0x00000000 0x01 0x00000000>;

> +			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;

> +			cdns,fifo-depth = <256>;

> +			cdns,fifo-width = <4>;

> +			cdns,trigger-address = <0x0>;

> +			#address-cells = <0x1>;

> +			#size-cells = <0x0>;

> +			clocks = <&k3_clks 75 6>;

> +			assigned-clocks = <&k3_clks 75 6>;

> +			assigned-clock-parents = <&k3_clks 75 7>;

> +			assigned-clock-rates = <166666666>;

> +			power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>;

> +		};

> +	};

>  };

>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index 5f85950daef7..bcec4fa444b5 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -402,4 +402,29 @@  sdhci1: mmc@fa00000 {
 		ti,otap-del-sel-ddr50 = <0x9>;
 		ti,clkbuf-sel = <0x7>;
 	};
+
+	fss: bus@fc00000 {
+		compatible = "simple-bus";
+		reg = <0x00 0x0fc00000 0x00 0x70000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ospi0: spi@fc40000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x00 0x0fc40000 0x00 0x100>,
+			      <0x05 0x00000000 0x01 0x00000000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			clocks = <&k3_clks 75 6>;
+			assigned-clocks = <&k3_clks 75 6>;
+			assigned-clock-parents = <&k3_clks 75 7>;
+			assigned-clock-rates = <166666666>;
+			power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>;
+		};
+	};
 };