diff mbox series

dt-bindings: Convert the BCM4329 bindings to YAML and extend

Message ID 20210313215302.4076765-1-linus.walleij@linaro.org
State Superseded
Headers show
Series dt-bindings: Convert the BCM4329 bindings to YAML and extend | expand

Commit Message

Linus Walleij March 13, 2021, 9:53 p.m. UTC
This converts the BCM4329 family bindings to YAML schema, and
extends and fixes the bindings like this:

- Name the bindings after the first chip (BCM4329) since
  wildcards like 43xx are nowadays frowned upon by the DT
  binding reviewers. We call this the "BCM4329 family"
- Add compatible strings for all the variants that seem to
  exist in the wild. (Derived from firmware listings.)
- Add required reg property (SDIO function number)
- Add reset-gpios property (some systems wire this to a GPIO
  line).
- I have only listed Arend as maintainer for now, volunteers
  can be added.

Cc: Arend van Spriel <aspriel@gmail.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Chi-hsien Lin <chi-hsien.lin@infineon.com>
Cc: Wright Feng <wright.feng@infineon.com>
Cc: Chung-hsien Hsu <chung-hsien.hsu@infineon.com>
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: SHA-cyfmac-dev-list@infineon.com
Cc: linux-mmc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 .../net/wireless/brcm,bcm4329-fmac.yaml       | 98 +++++++++++++++++++
 .../net/wireless/brcm,bcm43xx-fmac.txt        | 38 -------
 2 files changed, 98 insertions(+), 38 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
 delete mode 100644 Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt

Comments

Julian Calaby March 14, 2021, 12:05 a.m. UTC | #1
Hi Linus,

On Sun, Mar 14, 2021 at 9:00 AM Linus Walleij <linus.walleij@linaro.org> wrote:
>
> This converts the BCM4329 family bindings to YAML schema, and
> extends and fixes the bindings like this:
>
> - Name the bindings after the first chip (BCM4329) since
>   wildcards like 43xx are nowadays frowned upon by the DT
>   binding reviewers. We call this the "BCM4329 family"
> - Add compatible strings for all the variants that seem to
>   exist in the wild. (Derived from firmware listings.)
> - Add required reg property (SDIO function number)
> - Add reset-gpios property (some systems wire this to a GPIO
>   line).
> - I have only listed Arend as maintainer for now, volunteers
>   can be added.
>
> Cc: Arend van Spriel <aspriel@gmail.com>
> Cc: Franky Lin <franky.lin@broadcom.com>
> Cc: Hante Meuleman <hante.meuleman@broadcom.com>
> Cc: Chi-hsien Lin <chi-hsien.lin@infineon.com>
> Cc: Wright Feng <wright.feng@infineon.com>
> Cc: Chung-hsien Hsu <chung-hsien.hsu@infineon.com>
> Cc: brcm80211-dev-list.pdl@broadcom.com
> Cc: SHA-cyfmac-dev-list@infineon.com
> Cc: linux-mmc@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
>  .../net/wireless/brcm,bcm4329-fmac.yaml       | 98 +++++++++++++++++++
>  .../net/wireless/brcm,bcm43xx-fmac.txt        | 38 -------
>  2 files changed, 98 insertions(+), 38 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
>  delete mode 100644 Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
>
> diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
> new file mode 100644
> index 000000000000..d172ee486cf6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
> @@ -0,0 +1,98 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/wireless/brcm,bcm4329-fmac.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom BCM4329 family fullmac wireless SDIO devices
> +
> +maintainers:
> +  - Arend van Spriel <arend@broadcom.com>
> +
> +description:
> +  The Broadcom Single chip MAC part for the BCM4329 family and
> +  later Cypress chips in the same family named CYW4373 and similar.
> +  These chips also have a Bluetooth portion described in a separate
> +  binding.
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - brcm,bcm43143-fmac
> +          - brcm,bcm4341b0-fmac
> +          - brcm,bcm4341b4-fmac
> +          - brcm,bcm4341b5-fmac
> +          - brcm,bcm4329-fmac
> +          - brcm,bcm4330-fmac
> +          - brcm,bcm4334-fmac
> +          - brcm,bcm43340-fmac
> +          - brcm,bcm4335-fmac
> +          - brcm,bcm43362-fmac
> +          - brcm,bcm4339-fmac
> +          - brcm,bcm43430a0-fmac
> +          - brcm,bcm43430a1-fmac
> +          - brcm,bcm43455-fmac
> +          - brcm,bcm43456-fmac
> +          - brcm,bcm4354-fmac
> +          - brcm,bcm4356-fmac
> +          - brcm,bcm4359-fmac
> +          - cypress,cyw4373-fmac
> +          - cypress,cyw43012-fmac

I don't know if this is necessary for SDIO, but should the non-4329
compatibles have the 4329 compatible as an alternative?

Thanks,
Julian Calaby March 15, 2021, 10:40 a.m. UTC | #2
Hi Linus,

On Mon, Mar 15, 2021 at 10:43 AM Linus Walleij <linus.walleij@linaro.org> wrote:
>

> On Sun, Mar 14, 2021 at 1:05 AM Julian Calaby <julian.calaby@gmail.com> wrote:

>

> > I don't know if this is necessary for SDIO, but should the non-4329

> > compatibles have the 4329 compatible as an alternative?

>

> I can, and I guess I should add it, as I grep:ed and saw this:

>

> arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts

> compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";

>

> So from more to less specific.

>

> Yours,

> Linus Walleij


If it helps, the pattern I've seen before for this is:

oneOf:
  - const: vendor,specific-device-1234
  - items:
    - enum:
      - vendor,compatible-device-2345
      - vendor,compatible-device-3456
    - const: vendor,specific-device-1234

See https://elixir.bootlin.com/linux/v5.12-rc3/source/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
for an example.

Thanks,

-- 
Julian Calaby

Email: julian.calaby@gmail.com
Profile: http://www.google.com/profiles/julian.calaby/
Linus Walleij March 15, 2021, 11:04 a.m. UTC | #3
By the way, here is a question to the broadcom folks:

On Sat, Mar 13, 2021 at 10:53 PM Linus Walleij <linus.walleij@linaro.org> wrote:

> +          - brcm,bcm43143-fmac
> +          - brcm,bcm4341b0-fmac
> +          - brcm,bcm4341b4-fmac
> +          - brcm,bcm4341b5-fmac
> +          - brcm,bcm4329-fmac
> +          - brcm,bcm4330-fmac
> +          - brcm,bcm4334-fmac
> +          - brcm,bcm43340-fmac
> +          - brcm,bcm4335-fmac
> +          - brcm,bcm43362-fmac
> +          - brcm,bcm4339-fmac
> +          - brcm,bcm43430a0-fmac
> +          - brcm,bcm43430a1-fmac
> +          - brcm,bcm43455-fmac
> +          - brcm,bcm43456-fmac
> +          - brcm,bcm4354-fmac
> +          - brcm,bcm4356-fmac
> +          - brcm,bcm4359-fmac
> +          - cypress,cyw4373-fmac
> +          - cypress,cyw43012-fmac

Here the "-fmac" suffix is added to distinguish the function from
other functions
in a combochip, usually WLAN + Bluetooth.

Are there some of these that are just WLAN and not combochips? In that case they
shall not have the "-fmac" suffix.

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
new file mode 100644
index 000000000000..d172ee486cf6
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
@@ -0,0 +1,98 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/brcm,bcm4329-fmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4329 family fullmac wireless SDIO devices
+
+maintainers:
+  - Arend van Spriel <arend@broadcom.com>
+
+description:
+  The Broadcom Single chip MAC part for the BCM4329 family and
+  later Cypress chips in the same family named CYW4373 and similar.
+  These chips also have a Bluetooth portion described in a separate
+  binding.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm43143-fmac
+          - brcm,bcm4341b0-fmac
+          - brcm,bcm4341b4-fmac
+          - brcm,bcm4341b5-fmac
+          - brcm,bcm4329-fmac
+          - brcm,bcm4330-fmac
+          - brcm,bcm4334-fmac
+          - brcm,bcm43340-fmac
+          - brcm,bcm4335-fmac
+          - brcm,bcm43362-fmac
+          - brcm,bcm4339-fmac
+          - brcm,bcm43430a0-fmac
+          - brcm,bcm43430a1-fmac
+          - brcm,bcm43455-fmac
+          - brcm,bcm43456-fmac
+          - brcm,bcm4354-fmac
+          - brcm,bcm4356-fmac
+          - brcm,bcm4359-fmac
+          - cypress,cyw4373-fmac
+          - cypress,cyw43012-fmac
+
+  reg:
+    description: SDIO function number for the device, for most cases
+      this will be 1.
+
+  interrupts:
+    maxItems: 1
+    description: Out-of-band (OOB) IRQ line for waking up the host
+      in response to WLAN activity. This corresponds to the HOST_WAKE
+      line into the chip.
+
+  interrupt-names:
+    description: Name for the OOB IRQ, this must be set to "host-wake".
+    const: host-wake
+
+  brcm,drive-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Drive strength used for the SDIO pins on the device in mA.
+    minimum: 0
+    maximum: 32
+
+  reset-gpios:
+    maxItems: 1
+    description: A GPIO line connected to the WL_RST line, if present
+      this shall be flagged as active low.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    mmc@80118000 {
+      compatible = "arm,pl18x", "arm,primecell";
+      reg = <0x80118000 0x1000>;
+      clocks = <&clk 0>, <&clk 1>;
+      clock-names = "mclk", "apb_pclk";
+      interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+      bus-width = <4>;
+      non-removable;
+      vmmc-supply = <&wl_bt_reg>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      wifi@1 {
+        compatible = "brcm,bcm4329-fmac";
+        reg = <1>;
+        interrupt-parent = <&gpio>;
+        interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-names = "host-wake";
+        reset-gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
deleted file mode 100644
index cffb2d6876e3..000000000000
--- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
+++ /dev/null
@@ -1,38 +0,0 @@ 
-Broadcom BCM43xx Fullmac wireless SDIO devices
-
-This node provides properties for controlling the Broadcom wireless device. The
-node is expected to be specified as a child node to the SDIO controller that
-connects the device to the system.
-
-Required properties:
-
- - compatible : Should be "brcm,bcm4329-fmac".
-
-Optional properties:
- - brcm,drive-strength : drive strength used for SDIO pins on device in mA
-	(default = 6).
- - interrupts : specifies attributes for the out-of-band interrupt (host-wake).
-	When not specified the device will use in-band SDIO interrupts.
- - interrupt-names : name of the out-of-band interrupt, which must be set
-	to "host-wake".
-
-Example:
-
-mmc3: mmc@1c12000 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins_a>;
-	vmmc-supply = <&reg_vmmc3>;
-	bus-width = <4>;
-	non-removable;
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-		interrupt-parent = <&pio>;
-		interrupts = <10 8>; /* PH10 / EINT10 */
-		interrupt-names = "host-wake";
-	};
-};