@@ -645,6 +645,16 @@ config I2C_HIGHLANDER
This driver can also be built as a module. If so, the module
will be called i2c-highlander.
+config I2C_HISI
+ tristate "HiSilicon I2C controller"
+ depends on ARM64 || COMPILE_TEST
+ help
+ Say Y here if you want to have Hisilicon I2C controller support
+ available on the Kunpeng Server.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-hisi.
+
config I2C_IBM_IIC
tristate "IBM PPC 4xx on-chip I2C interface"
depends on 4xx
@@ -63,6 +63,7 @@ obj-$(CONFIG_I2C_EMEV2) += i2c-emev2.o
obj-$(CONFIG_I2C_EXYNOS5) += i2c-exynos5.o
obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o
+obj-$(CONFIG_I2C_HISI) += i2c-hisi.o
obj-$(CONFIG_I2C_HIX5HD2) += i2c-hix5hd2.o
obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
obj-$(CONFIG_I2C_IMG) += i2c-img-scb.o
new file mode 100644
@@ -0,0 +1,506 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * HiSilicon I2C Controller Driver for Kunpeng SoC
+ *
+ * Copyright (c) 2021 HiSilicon Limited.
+ */
+
+#include <linux/bits.h>
+#include <linux/bitfield.h>
+#include <linux/completion.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+
+#define HISI_I2C_FRAME_CTRL 0x0000
+#define HISI_I2C_FRAME_CTRL_SPEED_MODE GENMASK(1, 0)
+#define HISI_I2C_FRAME_CTRL_ADDR_TEN BIT(2)
+#define HISI_I2C_SLV_ADDR 0x0004
+#define HISI_I2C_SLV_ADDR_VAL GENMASK(9, 0)
+#define HISI_I2C_SLV_ADDR_GC_S_MODE BIT(10)
+#define HISI_I2C_SLV_ADDR_GC_S_EN BIT(11)
+#define HISI_I2C_CMD_TXDATA 0x0008
+#define HISI_I2C_CMD_TXDATA_DATA GENMASK(7, 0)
+#define HISI_I2C_CMD_TXDATA_RW BIT(8)
+#define HISI_I2C_CMD_TXDATA_P_EN BIT(9)
+#define HISI_I2C_CMD_TXDATA_SR_EN BIT(10)
+#define HISI_I2C_RXDATA 0x000c
+#define HISI_I2C_RXDATA_DATA GENMASK(7, 0)
+#define HISI_I2C_SS_SCL_HCNT 0x0010
+#define HISI_I2C_SS_SCL_LCNT 0x0014
+#define HISI_I2C_FS_SCL_HCNT 0x0018
+#define HISI_I2C_FS_SCL_LCNT 0x001c
+#define HISI_I2C_HS_SCL_HCNT 0x0020
+#define HISI_I2C_HS_SCL_LCNT 0x0024
+#define HISI_I2C_FIFO_CTRL 0x0028
+#define HISI_I2C_FIFO_RX_CLR BIT(0)
+#define HISI_I2C_FIFO_TX_CLR BIT(1)
+#define HISI_I2C_FIFO_RX_AF_THRESH GENMASK(7, 2)
+#define HISI_I2C_FIFO_TX_AE_THRESH GENMASK(13, 8)
+#define HISI_I2C_FIFO_STATE 0x002c
+#define HISI_I2C_FIFO_STATE_RX_RERR BIT(0)
+#define HISI_I2C_FIFO_STATE_RX_WERR BIT(1)
+#define HISI_I2C_FIFO_STATE_RX_EMPTY BIT(3)
+#define HISI_I2C_FIFO_STATE_TX_RERR BIT(6)
+#define HISI_I2C_FIFO_STATE_TX_WERR BIT(7)
+#define HISI_I2C_FIFO_STATE_TX_FULL BIT(11)
+#define HISI_I2C_SDA_HOLD 0x0030
+#define HISI_I2C_SDA_HOLD_TX GENMASK(15, 0)
+#define HISI_I2C_SDA_HOLD_RX GENMASK(23, 16)
+#define HISI_I2C_FS_SPK_LEN 0x0038
+#define HISI_I2C_FS_SPK_LEN_CNT GENMASK(7, 0)
+#define HISI_I2C_HS_SPK_LEN 0x003c
+#define HISI_I2C_HS_SPK_LEN_CNT GENMASK(7, 0)
+#define HISI_I2C_INT_MSTAT 0x0044
+#define HISI_I2C_INT_CLR 0x0048
+#define HISI_I2C_INT_MASK 0x004C
+#define HISI_I2C_TRANS_STATE 0x0050
+#define HISI_I2C_TRANS_ERR 0x0054
+#define HISI_I2C_VERSION 0x0058
+
+#define HISI_I2C_INT_ALL GENMASK(4, 0)
+#define HISI_I2C_INT_TRANS_CPLT BIT(0)
+#define HISI_I2C_INT_TRANS_ERR BIT(1)
+#define HISI_I2C_INT_FIFO_ERR BIT(2)
+#define HISI_I2C_INT_RX_FULL BIT(3)
+#define HISI_I2C_INT_TX_EMPTY BIT(4)
+#define HISI_I2C_INT_ERR \
+ (HISI_I2C_INT_TRANS_ERR | HISI_I2C_INT_FIFO_ERR)
+
+#define HISI_I2C_STD_SPEED_MODE 0
+#define HISI_I2C_FAST_SPEED_MODE 1
+#define HISI_I2C_HIGH_SPEED_MODE 2
+
+#define HISI_I2C_TX_FIFO_DEPTH 64
+#define HISI_I2C_RX_FIFO_DEPTH 64
+#define HISI_I2C_TX_F_AE_THRESH 1
+#define HISI_I2C_RX_F_AF_THRESH 60
+
+#define HZ_PER_KHZ 1000
+
+#define NSEC_TO_CYCLES(ns, clk_rate_khz) \
+ DIV_ROUND_UP_ULL((clk_rate_khz) * (ns), NSEC_PER_MSEC)
+
+struct hisi_i2c_controller {
+ struct i2c_adapter adapter;
+ void __iomem *iobase;
+ struct device *dev;
+ int irq;
+
+ /* Intermediates for recording the transfer process */
+ struct completion *completion;
+ struct i2c_msg *msgs;
+ int msg_num;
+ int msg_tx_idx;
+ int buf_tx_idx;
+ int msg_rx_idx;
+ int buf_rx_idx;
+ u16 tar_addr;
+ u32 xfer_err;
+
+ /* I2C bus configuration */
+ struct i2c_timings t;
+ u64 clk_rate_khz;
+ u32 spk_len;
+};
+
+static void hisi_i2c_enable_int(struct hisi_i2c_controller *ctlr, u32 mask)
+{
+ writel_relaxed(mask, ctlr->iobase + HISI_I2C_INT_MASK);
+}
+
+static void hisi_i2c_disable_int(struct hisi_i2c_controller *ctlr, u32 mask)
+{
+ writel_relaxed((~mask) & HISI_I2C_INT_ALL, ctlr->iobase + HISI_I2C_INT_MASK);
+}
+
+static void hisi_i2c_clear_int(struct hisi_i2c_controller *ctlr, u32 mask)
+{
+ writel_relaxed(mask, ctlr->iobase + HISI_I2C_INT_CLR);
+}
+
+static void hisi_i2c_handle_errors(struct hisi_i2c_controller *ctlr)
+{
+ u32 int_err = ctlr->xfer_err, reg;
+
+ if (int_err & HISI_I2C_INT_FIFO_ERR) {
+ reg = readl(ctlr->iobase + HISI_I2C_FIFO_STATE);
+
+ if (reg & HISI_I2C_FIFO_STATE_RX_RERR)
+ dev_err(ctlr->dev, "rx fifo error read\n");
+
+ if (reg & HISI_I2C_FIFO_STATE_RX_WERR)
+ dev_err(ctlr->dev, "rx fifo error write\n");
+
+ if (reg & HISI_I2C_FIFO_STATE_TX_RERR)
+ dev_err(ctlr->dev, "tx fifo error read\n");
+
+ if (reg & HISI_I2C_FIFO_STATE_TX_WERR)
+ dev_err(ctlr->dev, "tx fifo error write\n");
+ }
+}
+
+static int hisi_i2c_start_xfer(struct hisi_i2c_controller *ctlr)
+{
+ struct i2c_msg *msg = ctlr->msgs;
+ u32 reg;
+
+ reg = readl(ctlr->iobase + HISI_I2C_FRAME_CTRL);
+ reg &= ~HISI_I2C_FRAME_CTRL_ADDR_TEN;
+ if (msg->flags & I2C_M_TEN)
+ reg |= HISI_I2C_FRAME_CTRL_ADDR_TEN;
+ writel(reg, ctlr->iobase + HISI_I2C_FRAME_CTRL);
+
+ reg = readl(ctlr->iobase + HISI_I2C_SLV_ADDR);
+ reg &= ~HISI_I2C_SLV_ADDR_VAL;
+ reg |= FIELD_PREP(HISI_I2C_SLV_ADDR_VAL, msg->addr);
+ writel(reg, ctlr->iobase + HISI_I2C_SLV_ADDR);
+
+ reg = readl(ctlr->iobase + HISI_I2C_FIFO_CTRL);
+ reg |= HISI_I2C_FIFO_RX_CLR | HISI_I2C_FIFO_TX_CLR;
+ writel(reg, ctlr->iobase + HISI_I2C_FIFO_CTRL);
+ reg &= ~(HISI_I2C_FIFO_RX_CLR | HISI_I2C_FIFO_TX_CLR);
+ writel(reg, ctlr->iobase + HISI_I2C_FIFO_CTRL);
+
+ hisi_i2c_clear_int(ctlr, HISI_I2C_INT_ALL);
+ hisi_i2c_enable_int(ctlr, HISI_I2C_INT_ALL);
+
+ return 0;
+}
+
+static void hisi_i2c_reset_xfer(struct hisi_i2c_controller *ctlr)
+{
+ ctlr->msg_num = 0;
+ ctlr->xfer_err = 0;
+ ctlr->msg_tx_idx = 0;
+ ctlr->msg_rx_idx = 0;
+ ctlr->buf_tx_idx = 0;
+ ctlr->buf_rx_idx = 0;
+}
+
+/*
+ * Initialize the transfer information and start the I2C bus transfer.
+ * We only configure the transfer and do some pre/post works here, and
+ * wait for the transfer done. The major transfer process is performed
+ * in the IRQ handler.
+ */
+static int hisi_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+ int num)
+{
+ struct hisi_i2c_controller *ctlr = i2c_get_adapdata(adap);
+ DECLARE_COMPLETION_ONSTACK(done);
+ int ret = num;
+
+ hisi_i2c_reset_xfer(ctlr);
+ ctlr->completion = &done;
+ ctlr->msg_num = num;
+ ctlr->msgs = msgs;
+
+ hisi_i2c_start_xfer(ctlr);
+
+ if (!wait_for_completion_timeout(ctlr->completion, adap->timeout)) {
+ hisi_i2c_disable_int(ctlr, HISI_I2C_INT_ALL);
+ synchronize_irq(ctlr->irq);
+ i2c_recover_bus(&ctlr->adapter);
+ dev_err(ctlr->dev, "bus transfer timeout\n");
+ ret = -EIO;
+ }
+
+ if (ctlr->xfer_err) {
+ hisi_i2c_handle_errors(ctlr);
+ ret = -EIO;
+ }
+
+ hisi_i2c_reset_xfer(ctlr);
+ ctlr->completion = NULL;
+
+ return ret;
+}
+
+static u32 hisi_i2c_functionality(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm hisi_i2c_algo = {
+ .master_xfer = hisi_i2c_master_xfer,
+ .functionality = hisi_i2c_functionality,
+};
+
+static int hisi_i2c_read_rx_fifo(struct hisi_i2c_controller *ctlr)
+{
+ struct i2c_msg *cur_msg;
+ u32 fifo_state;
+
+ while (ctlr->msg_rx_idx < ctlr->msg_num) {
+ cur_msg = ctlr->msgs + ctlr->msg_rx_idx;
+
+ if (!(cur_msg->flags & I2C_M_RD)) {
+ ctlr->msg_rx_idx++;
+ continue;
+ }
+
+ fifo_state = readl(ctlr->iobase + HISI_I2C_FIFO_STATE);
+ while (!(fifo_state & HISI_I2C_FIFO_STATE_RX_EMPTY) &&
+ ctlr->buf_rx_idx < cur_msg->len) {
+ cur_msg->buf[ctlr->buf_rx_idx++] = readl(ctlr->iobase + HISI_I2C_RXDATA);
+ fifo_state = readl(ctlr->iobase + HISI_I2C_FIFO_STATE);
+ }
+
+ if (ctlr->buf_rx_idx == cur_msg->len) {
+ ctlr->buf_rx_idx = 0;
+ ctlr->msg_rx_idx++;
+ }
+
+ if (fifo_state & HISI_I2C_FIFO_STATE_RX_EMPTY)
+ break;
+ }
+
+ return 0;
+}
+
+static void hisi_i2c_xfer_msg(struct hisi_i2c_controller *ctlr)
+{
+ int max_write = HISI_I2C_TX_FIFO_DEPTH;
+ bool need_restart = false, last_msg;
+ struct i2c_msg *cur_msg;
+ u32 cmd, fifo_state;
+
+ while (ctlr->msg_tx_idx < ctlr->msg_num) {
+ cur_msg = ctlr->msgs + ctlr->msg_tx_idx;
+ last_msg = (ctlr->msg_tx_idx == ctlr->msg_num - 1);
+
+ /* Signal the SR bit when we start transferring a new message */
+ if (ctlr->msg_tx_idx && !ctlr->buf_tx_idx)
+ need_restart = true;
+
+ fifo_state = readl(ctlr->iobase + HISI_I2C_FIFO_STATE);
+ while (!(fifo_state & HISI_I2C_FIFO_STATE_TX_FULL) &&
+ ctlr->buf_tx_idx < cur_msg->len && max_write) {
+ cmd = 0;
+
+ if (need_restart) {
+ cmd |= HISI_I2C_CMD_TXDATA_SR_EN;
+ need_restart = false;
+ }
+
+ /* Signal the STOP bit at the last frame of the last message */
+ if (ctlr->buf_tx_idx == cur_msg->len - 1 && last_msg)
+ cmd |= HISI_I2C_CMD_TXDATA_P_EN;
+
+ if (cur_msg->flags & I2C_M_RD)
+ cmd |= HISI_I2C_CMD_TXDATA_RW;
+ else
+ cmd |= FIELD_PREP(HISI_I2C_CMD_TXDATA_DATA,
+ cur_msg->buf[ctlr->buf_tx_idx]);
+
+ writel(cmd, ctlr->iobase + HISI_I2C_CMD_TXDATA);
+ ctlr->buf_tx_idx++;
+ max_write--;
+
+ fifo_state = readl(ctlr->iobase + HISI_I2C_FIFO_STATE);
+ }
+
+ /* Update the transfer index after per message transfer is done. */
+ if (ctlr->buf_tx_idx == cur_msg->len) {
+ ctlr->buf_tx_idx = 0;
+ ctlr->msg_tx_idx++;
+ }
+
+ if ((fifo_state & HISI_I2C_FIFO_STATE_TX_FULL) ||
+ max_write == 0)
+ break;
+ }
+}
+
+static irqreturn_t hisi_i2c_irq(int irq, void *context)
+{
+ struct hisi_i2c_controller *ctlr = context;
+ u32 int_stat;
+
+ int_stat = readl(ctlr->iobase + HISI_I2C_INT_MSTAT);
+ hisi_i2c_clear_int(ctlr, int_stat);
+ if (!(int_stat & HISI_I2C_INT_ALL))
+ return IRQ_NONE;
+
+ if (int_stat & HISI_I2C_INT_TX_EMPTY)
+ hisi_i2c_xfer_msg(ctlr);
+
+ if (int_stat & HISI_I2C_INT_ERR) {
+ ctlr->xfer_err = int_stat;
+ goto out;
+ }
+
+ /* Drain the rx fifo before finish the transfer */
+ if (int_stat & (HISI_I2C_INT_TRANS_CPLT | HISI_I2C_INT_RX_FULL))
+ hisi_i2c_read_rx_fifo(ctlr);
+
+out:
+ if (int_stat & HISI_I2C_INT_TRANS_CPLT || ctlr->xfer_err) {
+ hisi_i2c_disable_int(ctlr, HISI_I2C_INT_ALL);
+ hisi_i2c_clear_int(ctlr, HISI_I2C_INT_ALL);
+ complete(ctlr->completion);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Helper function for calculating and configuring the HIGH and LOW
+ * periods of SCL clock. The caller will pass the ratio of the
+ * counts (divide / divisor) according to the target speed mode,
+ * and the target registers.
+ */
+static void hisi_i2c_set_scl(struct hisi_i2c_controller *ctlr,
+ u32 divide, u32 divisor,
+ u32 reg_hcnt, u32 reg_lcnt)
+{
+ u32 total_cnt, t_scl_hcnt, t_scl_lcnt, scl_fall_cnt, scl_rise_cnt;
+ u32 scl_hcnt, scl_lcnt;
+
+ /* Total SCL clock cycles per speed period */
+ total_cnt = DIV_ROUND_UP_ULL(ctlr->clk_rate_khz * HZ_PER_KHZ, ctlr->t.bus_freq_hz);
+ /* Total HIGH level SCL clock cycles including edges */
+ t_scl_hcnt = DIV_ROUND_UP_ULL(total_cnt * divide, divisor);
+ /* Total LOW level SCL clock cycles including edges */
+ t_scl_lcnt = total_cnt - t_scl_hcnt;
+ /* Fall edge SCL clock cycles */
+ scl_fall_cnt = NSEC_TO_CYCLES(ctlr->t.scl_fall_ns, ctlr->clk_rate_khz);
+ /* Rise edge SCL clock cycles */
+ scl_rise_cnt = NSEC_TO_CYCLES(ctlr->t.scl_rise_ns, ctlr->clk_rate_khz);
+
+ /* Calculated HIGH and LOW periods of SCL clock */
+ scl_hcnt = t_scl_hcnt - ctlr->spk_len - 7 - scl_fall_cnt;
+ scl_lcnt = t_scl_lcnt - 1 - scl_rise_cnt;
+
+ writel(scl_hcnt, ctlr->iobase + reg_hcnt);
+ writel(scl_lcnt, ctlr->iobase + reg_lcnt);
+}
+
+static void hisi_i2c_configure_bus(struct hisi_i2c_controller *ctlr)
+{
+ u32 reg, sda_hold_cnt, speed_mode;
+
+ i2c_parse_fw_timings(ctlr->dev, &ctlr->t, true);
+ ctlr->spk_len = NSEC_TO_CYCLES(ctlr->t.digital_filter_width_ns, ctlr->clk_rate_khz);
+
+ switch (ctlr->t.bus_freq_hz) {
+ case I2C_MAX_FAST_MODE_FREQ:
+ speed_mode = HISI_I2C_FAST_SPEED_MODE;
+ hisi_i2c_set_scl(ctlr, 26, 76, HISI_I2C_FS_SCL_HCNT, HISI_I2C_FS_SCL_LCNT);
+ break;
+ case I2C_MAX_HIGH_SPEED_MODE_FREQ:
+ speed_mode = HISI_I2C_HIGH_SPEED_MODE;
+ hisi_i2c_set_scl(ctlr, 6, 22, HISI_I2C_HS_SCL_HCNT, HISI_I2C_HS_SCL_LCNT);
+ break;
+ case I2C_MAX_STANDARD_MODE_FREQ:
+ default:
+ speed_mode = HISI_I2C_STD_SPEED_MODE;
+
+ /* For default condition force the bus speed to standard mode. */
+ ctlr->t.bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ;
+ hisi_i2c_set_scl(ctlr, 40, 87, HISI_I2C_SS_SCL_HCNT, HISI_I2C_SS_SCL_LCNT);
+ break;
+ }
+
+ reg = readl(ctlr->iobase + HISI_I2C_FRAME_CTRL);
+ reg &= ~HISI_I2C_FRAME_CTRL_SPEED_MODE;
+ reg |= FIELD_PREP(HISI_I2C_FRAME_CTRL_SPEED_MODE, speed_mode);
+ writel(reg, ctlr->iobase + HISI_I2C_FRAME_CTRL);
+
+ sda_hold_cnt = NSEC_TO_CYCLES(ctlr->t.sda_hold_ns, ctlr->clk_rate_khz);
+
+ reg = FIELD_PREP(HISI_I2C_SDA_HOLD_TX, sda_hold_cnt);
+ writel(reg, ctlr->iobase + HISI_I2C_SDA_HOLD);
+
+ writel(ctlr->spk_len, ctlr->iobase + HISI_I2C_FS_SPK_LEN);
+
+ reg = FIELD_PREP(HISI_I2C_FIFO_RX_AF_THRESH, HISI_I2C_RX_F_AF_THRESH);
+ reg |= FIELD_PREP(HISI_I2C_FIFO_TX_AE_THRESH, HISI_I2C_TX_F_AE_THRESH);
+ writel(reg, ctlr->iobase + HISI_I2C_FIFO_CTRL);
+}
+
+static int hisi_i2c_probe(struct platform_device *pdev)
+{
+ struct hisi_i2c_controller *ctlr;
+ struct device *dev = &pdev->dev;
+ struct i2c_adapter *adapter;
+ u32 hw_version;
+ int ret;
+
+ ctlr = devm_kzalloc(dev, sizeof(*ctlr), GFP_KERNEL);
+ if (!ctlr)
+ return -ENOMEM;
+
+ ctlr->iobase = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(ctlr->iobase))
+ return PTR_ERR(ctlr->iobase);
+
+ ctlr->irq = platform_get_irq(pdev, 0);
+ if (ctlr->irq < 0)
+ return ctlr->irq;
+
+ ctlr->dev = dev;
+
+ hisi_i2c_disable_int(ctlr, HISI_I2C_INT_ALL);
+
+ ret = devm_request_irq(dev, ctlr->irq, hisi_i2c_irq, 0, "hisi-i2c", ctlr);
+ if (ret) {
+ dev_err(dev, "failed to request irq handler, ret = %d\n", ret);
+ return ret;
+ }
+
+ ret = device_property_read_u64(dev, "clk_rate", &ctlr->clk_rate_khz);
+ if (ret) {
+ dev_err(dev, "failed to get clock frequency, ret = %d\n", ret);
+ return ret;
+ }
+
+ ctlr->clk_rate_khz = DIV_ROUND_UP_ULL(ctlr->clk_rate_khz, HZ_PER_KHZ);
+
+ hisi_i2c_configure_bus(ctlr);
+
+ adapter = &ctlr->adapter;
+ snprintf(adapter->name, sizeof(adapter->name),
+ "HiSilicon I2C Controller %s", dev_name(dev));
+ adapter->owner = THIS_MODULE;
+ adapter->algo = &hisi_i2c_algo;
+ adapter->dev.parent = dev;
+ i2c_set_adapdata(adapter, ctlr);
+
+ ret = devm_i2c_add_adapter(dev, adapter);
+ if (ret) {
+ dev_err(dev, "failed to add i2c adapter, ret = %d\n", ret);
+ return ret;
+ }
+
+ hw_version = readl(ctlr->iobase + HISI_I2C_VERSION);
+ dev_info(ctlr->dev, "speed mode is %s. hw version 0x%x\n",
+ i2c_freq_mode_string(ctlr->t.bus_freq_hz), hw_version);
+
+ return 0;
+}
+
+static const struct acpi_device_id hisi_i2c_acpi_ids[] = {
+ { "HISI03D1", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(acpi, hisi_i2c_acpi_ids);
+MODULE_ALIAS("platform:hisi-i2c");
+
+static struct platform_driver hisi_i2c_driver = {
+ .probe = hisi_i2c_probe,
+ .driver = {
+ .name = "hisi-i2c",
+ .acpi_match_table = hisi_i2c_acpi_ids,
+ },
+};
+module_platform_driver(hisi_i2c_driver);
+
+MODULE_AUTHOR("Yicong Yang <yangyicong@hisilicon.com>");
+MODULE_DESCRIPTION("HiSilicon I2C Controller Driver");
+MODULE_LICENSE("GPL");