diff mbox series

[1/3] spi: pl022: Drop custom per-chip cs_control

Message ID 20210330164907.2346010-1-linus.walleij@linaro.org
State Accepted
Commit 4179e576b56d82e5ce007b9f548efb90605e2713
Headers show
Series [1/3] spi: pl022: Drop custom per-chip cs_control | expand

Commit Message

Linus Walleij March 30, 2021, 4:49 p.m. UTC 
Drop the custom cs_control() assigned through platform data,
we have no in-tree users and the only out-of-tree use I have
ever seen of this facility is to pull GPIO lines, which is
something the driver can already do for us.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

---
 drivers/spi/spi-pl022.c    | 26 ++------------------------
 include/linux/amba/pl022.h |  3 ---
 2 files changed, 2 insertions(+), 27 deletions(-)

-- 
2.29.2

Comments

Mark Brown April 1, 2021, 10:16 a.m. UTC | #1 
On Tue, 30 Mar 2021 18:49:05 +0200, Linus Walleij wrote:
> Drop the custom cs_control() assigned through platform data,

> we have no in-tree users and the only out-of-tree use I have

> ever seen of this facility is to pull GPIO lines, which is

> something the driver can already do for us.


Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/3] spi: pl022: Drop custom per-chip cs_control
      commit: 4179e576b56d82e5ce007b9f548efb90605e2713
[2/3] spi: pl022: Use GPIOs looked up by the core
      commit: 77f983a9df421fa00ca6a2f494dc79f8afca75a2
[3/3] spi: pl022: Convert to use GPIO descriptors
      commit: 8bb2dbf1e14d05e92a23e03bcbd1c27f7ee937f7

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index faaca7373b40..e5dd7756c2ea 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -412,7 +412,6 @@  struct pl022 {
  * @enable_dma: Whether to enable DMA or not
  * @read: function ptr to be used to read when doing xfer for this chip
  * @write: function ptr to be used to write when doing xfer for this chip
- * @cs_control: chip select callback provided by chip
  * @xfer_type: polling/interrupt/DMA
  *
  * Runtime state of the SSP controller, maintained per chip,
@@ -427,22 +426,9 @@  struct chip_data {
 	bool enable_dma;
 	enum ssp_reading read;
 	enum ssp_writing write;
-	void (*cs_control) (u32 command);
 	int xfer_type;
 };
 
-/**
- * null_cs_control - Dummy chip select function
- * @command: select/delect the chip
- *
- * If no chip select function is provided by client this is used as dummy
- * chip select
- */
-static void null_cs_control(u32 command)
-{
-	pr_debug("pl022: dummy chip select control, CS=0x%x\n", command);
-}
-
 /**
  * internal_cs_control - Control chip select signals via SSP_CSR.
  * @pl022: SSP driver private data structure
@@ -470,8 +456,6 @@  static void pl022_cs_control(struct pl022 *pl022, u32 command)
 		internal_cs_control(pl022, command);
 	else if (gpio_is_valid(pl022->cur_cs))
 		gpio_set_value(pl022->cur_cs, command);
-	else
-		pl022->cur_chip->cs_control(command);
 }
 
 /**
@@ -1829,7 +1813,6 @@  static const struct pl022_config_chip pl022_default_chip_info = {
 	.ctrl_len = SSP_BITS_8,
 	.wait_state = SSP_MWIRE_WAIT_ZERO,
 	.duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
-	.cs_control = null_cs_control,
 };
 
 /**
@@ -1940,13 +1923,8 @@  static int pl022_setup(struct spi_device *spi)
 
 	/* Now set controller state based on controller data */
 	chip->xfer_type = chip_info->com_mode;
-	if (!chip_info->cs_control) {
-		chip->cs_control = null_cs_control;
-		if (!gpio_is_valid(pl022->chipselects[spi->chip_select]))
-			dev_warn(&spi->dev,
-				 "invalid chip select\n");
-	} else
-		chip->cs_control = chip_info->cs_control;
+	if (!gpio_is_valid(pl022->chipselects[spi->chip_select]))
+		dev_warn(&spi->dev, "invalid chip select\n");
 
 	/* Check bits per word with vendor specific range */
 	if ((bits <= 3) || (bits > pl022->vendor->max_bpw)) {
diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h
index 131b27c97209..29274cedefde 100644
--- a/include/linux/amba/pl022.h
+++ b/include/linux/amba/pl022.h
@@ -265,8 +265,6 @@  struct pl022_ssp_controller {
  * @duplex: Microwire interface: Full/Half duplex
  * @clkdelay: on the PL023 variant, the delay in feeback clock cycles
  * before sampling the incoming line
- * @cs_control: function pointer to board-specific function to
- * assert/deassert I/O port to control HW generation of devices chip-select.
  */
 struct pl022_config_chip {
 	enum ssp_interface iface;
@@ -280,7 +278,6 @@  struct pl022_config_chip {
 	enum ssp_microwire_wait_state wait_state;
 	enum ssp_duplex duplex;
 	enum ssp_clkdelay clkdelay;
-	void (*cs_control) (u32 control);
 };
 
 #endif /* _SSP_PL022_H */