mbox series

[00/15] SDX55 devicetree updates

Message ID 20210408170457.91409-1-manivannan.sadhasivam@linaro.org
Headers show
Series SDX55 devicetree updates | expand

Message

Manivannan Sadhasivam April 8, 2021, 5:04 p.m. UTC 
Hi Bjorn,

This series updates the SDX55 devicetree by adding below features:

- A7 PLL
- APCS mailbox
- CPUFreq using clk and regulator
- SMP2P
- IMEM, PIL
- SCM
- Interconnect
- Telit FN980 TLB board
- Thundercomm T55 dev board
- Modem remoteproc

Except remoteproc, all of the driver patches already merged. Remoteproc
patch will be submitted separately.

Thanks,
Mani

Manivannan Sadhasivam (15):
  ARM: dts: qcom: sdx55: Add support for A7 PLL clock
  ARM: dts: qcom: sdx55: Add support for APCS block
  ARM: dts: qcom: sdx55: Add CPUFreq support
  ARM: dts: qcom: sdx55: Add modem SMP2P node
  ARM: dts: qcom: sdx55: Add IMEM and PIL info region
  dt-bindings: firmware: scm: Add compatible for SDX55
  ARM: dts: qcom: sdx55: Add SCM node
  ARM: dts: qcom: sdx55: Add interconnect nodes
  ARM: dts: qcom: Fix node name for NAND controller node
  dt-bindings: arm: qcom: Add binding for Telit FN980 TLB board
  ARM: dts: qcom: sdx55: Add basic devicetree support for Telit FN980
    TLB
  dt-bindings: arm: qcom: Add binding for Thundercomm T55 kit
  ARM: dts: qcom: sdx55: Add basic devicetree support for Thundercomm
    T55
  dt-bindings: remoteproc: qcom: pas: Add binding for SDX55
  ARM: dts: qcom: sdx55: Add Modem remoteproc node

 .../devicetree/bindings/arm/qcom.yaml         |   2 +
 .../devicetree/bindings/firmware/qcom,scm.txt |   1 +
 .../bindings/remoteproc/qcom,adsp.txt         |   4 +
 arch/arm/boot/dts/Makefile                    |   4 +-
 arch/arm/boot/dts/qcom-ipq4019.dtsi           |   2 +-
 arch/arm/boot/dts/qcom-sdx55-t55.dts          | 281 +++++++++++++++++
 .../boot/dts/qcom-sdx55-telit-fn980-tlb.dts   | 282 ++++++++++++++++++
 arch/arm/boot/dts/qcom-sdx55.dtsi             | 166 ++++++++++-
 8 files changed, 739 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/boot/dts/qcom-sdx55-t55.dts
 create mode 100644 arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts

-- 
2.25.1

Comments

Rob Herring (Arm) April 9, 2021, 6:52 p.m. UTC | #1 
On Thu, 08 Apr 2021 22:34:54 +0530, Manivannan Sadhasivam wrote:
> Add devicetree binding for Thundercomm T55 Dev kit based on SDX55.

> 

> Cc: Rob Herring <robh+dt@kernel.org>

> Cc: devicetree@vger.kernel.org

> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

> ---

>  Documentation/devicetree/bindings/arm/qcom.yaml | 1 +

>  1 file changed, 1 insertion(+)

> 


Acked-by: Rob Herring <robh@kernel.org>