diff mbox series

[v5,2/3] dt-bindings: touchscreen: Add HY46XX bindings

Message ID 20210411114804.151754-3-giulio.benetti@benettiengineering.com
State Superseded
Headers show
Series [v5,1/3] dt-bindings: Add Hycon Technology vendor prefix | expand

Commit Message

Giulio Benetti April 11, 2021, 11:48 a.m. UTC
This adds device tree bindings for the Hycon HY46XX touchscreen series.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
V1->V2:
As suggested by Rob Herring:
* fixed $id: address
* added "hycon," in front of every custom property
* changed all possible property to boolean type
* removed proximity-sensor-switch property since it's not handled in driver
V2->V3:
As suggested by Jonathan Neuschäfer:
* fixed some typo
* fixed description indentation
* improved boolean properties descriptions
* improved hycon,report-speed description
V3->V4:
* fixed binding compatible string in example as suggested by Jonathan Neuschäfer
V4->V5:
As suggested by Rob Herring:
* drop hycon- prefix from compatible
* use Hertz unit suffix for hycon,report-speed instead of u32
* set hycon,report-speed minimum to 1Hz, 0Hz make controller to do nothing
* change hycon,power-noise-enable property name to hycon,noise-filter-enable
* improve hycon,filter-data property description
* use generic touchscreen node name in example
---
 .../input/touchscreen/hycon,hy46xx.yaml       | 119 ++++++++++++++++++
 MAINTAINERS                                   |   6 +
 2 files changed, 125 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml

Comments

Rob Herring April 12, 2021, 1:20 p.m. UTC | #1
On Sun, 11 Apr 2021 13:48:03 +0200, Giulio Benetti wrote:
> This adds device tree bindings for the Hycon HY46XX touchscreen series.
> 
> Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
> ---
> V1->V2:
> As suggested by Rob Herring:
> * fixed $id: address
> * added "hycon," in front of every custom property
> * changed all possible property to boolean type
> * removed proximity-sensor-switch property since it's not handled in driver
> V2->V3:
> As suggested by Jonathan Neuschäfer:
> * fixed some typo
> * fixed description indentation
> * improved boolean properties descriptions
> * improved hycon,report-speed description
> V3->V4:
> * fixed binding compatible string in example as suggested by Jonathan Neuschäfer
> V4->V5:
> As suggested by Rob Herring:
> * drop hycon- prefix from compatible
> * use Hertz unit suffix for hycon,report-speed instead of u32
> * set hycon,report-speed minimum to 1Hz, 0Hz make controller to do nothing
> * change hycon,power-noise-enable property name to hycon,noise-filter-enable
> * improve hycon,filter-data property description
> * use generic touchscreen node name in example
> ---
>  .../input/touchscreen/hycon,hy46xx.yaml       | 119 ++++++++++++++++++
>  MAINTAINERS                                   |   6 +
>  2 files changed, 125 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml: properties:hycon,report-speed: 'oneOf' conditional failed, one must be fixed:
	'type' is a required property
	Additional properties are not allowed ('minimum', 'maximum' were unexpected)
	/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml: properties:hycon,report-speed: 'oneOf' conditional failed, one must be fixed:
		'enum' is a required property
		'const' is a required property
	/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml: properties:hycon,report-speed: 'oneOf' conditional failed, one must be fixed:
		'$ref' is a required property
		'allOf' is a required property
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml: ignoring, error in schema: properties: hycon,report-speed
warning: no schema found in file: ./Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml
Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.example.dt.yaml:0:0: /example-0/i2c/touchscreen@1c: failed to match any schema with compatible: ['hycon,hy4633']

See https://patchwork.ozlabs.org/patch/1464803

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml b/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml
new file mode 100644
index 000000000000..ae792e3716ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml
@@ -0,0 +1,119 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/hycon,hy46xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hycon HY46XX series touchscreen controller bindings
+
+description: |
+  There are 6 variants of the chip for various touch panel sizes and cover lens material
+   Glass: 0.3mm--4.0mm
+    PET/PMMA: 0.2mm--2.0mm
+    HY4613(B)-N048  < 6"
+    HY4614(B)-N068  7" .. 10.1"
+    HY4621-NS32  < 5"
+    HY4623-NS48  5.1" .. 7"
+   Glass: 0.3mm--8.0mm
+    PET/PMMA: 0.2mm--4.0mm
+    HY4633(B)-N048  < 6"
+    HY4635(B)-N048  < 7" .. 10.1"
+
+maintainers:
+  - Giulio Benetti <giulio.benetti@benettiengineering.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - hycon,hy4613
+      - hycon,hy4614
+      - hycon,hy4621
+      - hycon,hy4623
+      - hycon,hy4633
+      - hycon,hy4635
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  vcc-supply: true
+
+  hycon,threshold:
+    description: Allows setting the sensitivity in the range from 0 to 255.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 255
+
+  hycon,glove-enable:
+    type: boolean
+    description: Allows enabling glove setting.
+
+  hycon,report-speed:
+    description: Allows setting the report speed in Hertz.
+    minimum: 1
+    maximum: 255
+
+  hycon,noise-filter-enable:
+    type: boolean
+    description: Allows enabling power noise filter.
+
+  hycon,filter-data:
+    description: Allows setting how many samples throw before reporting touch
+                 in the range from 0 to 5.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 5
+
+  hycon,gain:
+    description: Allows setting the sensitivity distance in the range from 0 to 5.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 5
+
+  hycon,edge-offset:
+    description: Allows setting the edge compensation in the range from 0 to 16.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 16
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-fuzz-x: true
+  touchscreen-fuzz-y: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+  interrupt-controller: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      touchscreen@1c {
+        compatible = "hycon,hy4633";
+        reg = <0x1c>;
+        interrupt-parent = <&gpio2>;
+        interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+        reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+      };
+    };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 7fdc513392f4..18a50942c019 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8250,6 +8250,12 @@  S:	Maintained
 F:	mm/hwpoison-inject.c
 F:	mm/memory-failure.c
 
+HYCON HY46XX TOUCHSCREEN SUPPORT
+M:	Giulio Benetti <giulio.benetti@benettiengineering.com>
+L:	linux-input@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml
+
 HYGON PROCESSOR SUPPORT
 M:	Pu Wen <puwen@hygon.cn>
 L:	linux-kernel@vger.kernel.org